1/*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org> 5 * All rights reserved. 6 * 7 * Based on dev/usb/input/ukbd.c 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 */ 30 31#include <sys/cdefs.h> 32__FBSDID("$FreeBSD$"); 33 34#include <sys/param.h> 35#include <sys/systm.h> 36#include <sys/bus.h> 37#include <sys/kernel.h> 38#include <sys/lock.h> 39#include <sys/module.h> 40#include <sys/malloc.h> 41#include <sys/mutex.h> 42#include <sys/rman.h> 43#include <sys/proc.h> 44#include <sys/sched.h> 45#include <sys/kdb.h> 46 47#include <machine/bus.h> 48#include <machine/cpu.h> 49#include <machine/intr.h> 50 51#include <dev/ofw/openfirm.h> 52#include <dev/ofw/ofw_bus.h> 53#include <dev/ofw/ofw_bus_subr.h> 54 55#include <sys/ioccom.h> 56#include <sys/filio.h> 57#include <sys/kbio.h> 58 59#include <dev/kbd/kbdreg.h> 60 61#include <machine/bus.h> 62 63#include <dev/kbd/kbdtables.h> 64 65#define KMI_LOCK() mtx_lock(&Giant) 66#define KMI_UNLOCK() mtx_unlock(&Giant) 67 68#ifdef INVARIANTS 69/* 70 * Assert that the lock is held in all contexts 71 * where the code can be executed. 72 */ 73#define KMI_LOCK_ASSERT() mtx_assert(&Giant, MA_OWNED) 74/* 75 * Assert that the lock is held in the contexts 76 * where it really has to be so. 77 */ 78#define KMI_CTX_LOCK_ASSERT() \ 79 do { \ 80 if (!kdb_active && !KERNEL_PANICKED()) \ 81 mtx_assert(&Giant, MA_OWNED); \ 82 } while (0) 83#else 84#define KMI_LOCK_ASSERT() (void)0 85#define KMI_CTX_LOCK_ASSERT() (void)0 86#endif 87 88#define KMICR 0x00 89#define KMICR_TYPE_NONPS2 (1 << 5) 90#define KMICR_RXINTREN (1 << 4) 91#define KMICR_TXINTREN (1 << 3) 92#define KMICR_EN (1 << 2) 93#define KMICR_FKMID (1 << 1) 94#define KMICR_FKMIC (1 << 0) 95#define KMISTAT 0x04 96#define KMISTAT_TXEMPTY (1 << 6) 97#define KMISTAT_TXBUSY (1 << 5) 98#define KMISTAT_RXFULL (1 << 4) 99#define KMISTAT_RXBUSY (1 << 3) 100#define KMISTAT_RXPARITY (1 << 2) 101#define KMISTAT_KMIC (1 << 1) 102#define KMISTAT_KMID (1 << 0) 103#define KMIDATA 0x08 104#define KMICLKDIV 0x0C 105#define KMIIR 0x10 106#define KMIIR_TXINTR (1 << 1) 107#define KMIIR_RXINTR (1 << 0) 108 109#define KMI_DRIVER_NAME "kmi" 110#define KMI_NFKEY (sizeof(fkey_tab)/sizeof(fkey_tab[0])) /* units */ 111 112#define SET_SCANCODE_SET 0xf0 113 114struct kmi_softc { 115 device_t sc_dev; 116 keyboard_t sc_kbd; 117 keymap_t sc_keymap; 118 accentmap_t sc_accmap; 119 fkeytab_t sc_fkeymap[KMI_NFKEY]; 120 121 struct resource* sc_mem_res; 122 struct resource* sc_irq_res; 123 void* sc_intr_hl; 124 125 int sc_mode; /* input mode (K_XLATE,K_RAW,K_CODE) */ 126 int sc_state; /* shift/lock key state */ 127 int sc_accents; /* accent key index (> 0) */ 128 uint32_t sc_flags; /* flags */ 129#define KMI_FLAG_COMPOSE 0x00000001 130#define KMI_FLAG_POLLING 0x00000002 131 132 struct thread *sc_poll_thread; 133}; 134 135/* Read/Write macros for Timer used as timecounter */ 136#define pl050_kmi_read_4(sc, reg) \ 137 bus_read_4((sc)->sc_mem_res, (reg)) 138 139#define pl050_kmi_write_4(sc, reg, val) \ 140 bus_write_4((sc)->sc_mem_res, (reg), (val)) 141 142/* prototypes */ 143static void kmi_set_leds(struct kmi_softc *, uint8_t); 144static int kmi_set_typematic(keyboard_t *, int); 145static uint32_t kmi_read_char(keyboard_t *, int); 146static void kmi_clear_state(keyboard_t *); 147static int kmi_ioctl(keyboard_t *, u_long, caddr_t); 148static int kmi_enable(keyboard_t *); 149static int kmi_disable(keyboard_t *); 150 151static int kmi_attached = 0; 152 153/* early keyboard probe, not supported */ 154static int 155kmi_configure(int flags) 156{ 157 return (0); 158} 159 160/* detect a keyboard, not used */ 161static int 162kmi_probe(int unit, void *arg, int flags) 163{ 164 return (ENXIO); 165} 166 167/* reset and initialize the device, not used */ 168static int 169kmi_init(int unit, keyboard_t **kbdp, void *arg, int flags) 170{ 171 return (ENXIO); 172} 173 174/* test the interface to the device, not used */ 175static int 176kmi_test_if(keyboard_t *kbd) 177{ 178 return (0); 179} 180 181/* finish using this keyboard, not used */ 182static int 183kmi_term(keyboard_t *kbd) 184{ 185 return (ENXIO); 186} 187 188/* keyboard interrupt routine, not used */ 189static int 190kmi_intr(keyboard_t *kbd, void *arg) 191{ 192 193 return (0); 194} 195 196/* lock the access to the keyboard, not used */ 197static int 198kmi_lock(keyboard_t *kbd, int lock) 199{ 200 return (1); 201} 202 203/* 204 * Enable the access to the device; until this function is called, 205 * the client cannot read from the keyboard. 206 */ 207static int 208kmi_enable(keyboard_t *kbd) 209{ 210 211 KMI_LOCK(); 212 KBD_ACTIVATE(kbd); 213 KMI_UNLOCK(); 214 215 return (0); 216} 217 218/* disallow the access to the device */ 219static int 220kmi_disable(keyboard_t *kbd) 221{ 222 223 KMI_LOCK(); 224 KBD_DEACTIVATE(kbd); 225 KMI_UNLOCK(); 226 227 return (0); 228} 229 230/* check if data is waiting */ 231static int 232kmi_check(keyboard_t *kbd) 233{ 234 struct kmi_softc *sc = kbd->kb_data; 235 uint32_t reg; 236 237 KMI_CTX_LOCK_ASSERT(); 238 239 if (!KBD_IS_ACTIVE(kbd)) 240 return (0); 241 242 reg = pl050_kmi_read_4(sc, KMIIR); 243 return (reg & KMIIR_RXINTR); 244} 245 246/* check if char is waiting */ 247static int 248kmi_check_char_locked(keyboard_t *kbd) 249{ 250 KMI_CTX_LOCK_ASSERT(); 251 252 if (!KBD_IS_ACTIVE(kbd)) 253 return (0); 254 255 return (kmi_check(kbd)); 256} 257 258static int 259kmi_check_char(keyboard_t *kbd) 260{ 261 int result; 262 263 KMI_LOCK(); 264 result = kmi_check_char_locked(kbd); 265 KMI_UNLOCK(); 266 267 return (result); 268} 269 270/* read one byte from the keyboard if it's allowed */ 271/* Currently unused. */ 272static int 273kmi_read(keyboard_t *kbd, int wait) 274{ 275 KMI_CTX_LOCK_ASSERT(); 276 277 if (!KBD_IS_ACTIVE(kbd)) 278 return (-1); 279 280 ++(kbd->kb_count); 281 printf("Implement ME: %s\n", __func__); 282 return (0); 283} 284 285/* read char from the keyboard */ 286static uint32_t 287kmi_read_char_locked(keyboard_t *kbd, int wait) 288{ 289 struct kmi_softc *sc = kbd->kb_data; 290 uint32_t reg, data; 291 292 KMI_CTX_LOCK_ASSERT(); 293 294 if (!KBD_IS_ACTIVE(kbd)) 295 return (NOKEY); 296 297 reg = pl050_kmi_read_4(sc, KMIIR); 298 if (reg & KMIIR_RXINTR) { 299 data = pl050_kmi_read_4(sc, KMIDATA); 300 return (data); 301 } 302 303 ++kbd->kb_count; 304 return (NOKEY); 305} 306 307/* Currently wait is always false. */ 308static uint32_t 309kmi_read_char(keyboard_t *kbd, int wait) 310{ 311 uint32_t keycode; 312 313 KMI_LOCK(); 314 keycode = kmi_read_char_locked(kbd, wait); 315 KMI_UNLOCK(); 316 317 return (keycode); 318} 319 320/* some useful control functions */ 321static int 322kmi_ioctl_locked(keyboard_t *kbd, u_long cmd, caddr_t arg) 323{ 324 struct kmi_softc *sc = kbd->kb_data; 325 int i; 326#if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \ 327 defined(COMPAT_FREEBSD4) || defined(COMPAT_43) 328 int ival; 329 330#endif 331 332 KMI_LOCK_ASSERT(); 333 334 switch (cmd) { 335 case KDGKBMODE: /* get keyboard mode */ 336 *(int *)arg = sc->sc_mode; 337 break; 338#if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \ 339 defined(COMPAT_FREEBSD4) || defined(COMPAT_43) 340 case _IO('K', 7): 341 ival = IOCPARM_IVAL(arg); 342 arg = (caddr_t)&ival; 343 /* FALLTHROUGH */ 344#endif 345 case KDSKBMODE: /* set keyboard mode */ 346 switch (*(int *)arg) { 347 case K_XLATE: 348 if (sc->sc_mode != K_XLATE) { 349 /* make lock key state and LED state match */ 350 sc->sc_state &= ~LOCK_MASK; 351 sc->sc_state |= KBD_LED_VAL(kbd); 352 } 353 /* FALLTHROUGH */ 354 case K_RAW: 355 case K_CODE: 356 if (sc->sc_mode != *(int *)arg) { 357 if ((sc->sc_flags & KMI_FLAG_POLLING) == 0) 358 kmi_clear_state(kbd); 359 sc->sc_mode = *(int *)arg; 360 } 361 break; 362 default: 363 return (EINVAL); 364 } 365 break; 366 367 case KDGETLED: /* get keyboard LED */ 368 *(int *)arg = KBD_LED_VAL(kbd); 369 break; 370#if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \ 371 defined(COMPAT_FREEBSD4) || defined(COMPAT_43) 372 case _IO('K', 66): 373 ival = IOCPARM_IVAL(arg); 374 arg = (caddr_t)&ival; 375 /* FALLTHROUGH */ 376#endif 377 case KDSETLED: /* set keyboard LED */ 378 /* NOTE: lock key state in "sc_state" won't be changed */ 379 if (*(int *)arg & ~LOCK_MASK) 380 return (EINVAL); 381 382 i = *(int *)arg; 383 384 /* replace CAPS LED with ALTGR LED for ALTGR keyboards */ 385 if (sc->sc_mode == K_XLATE && 386 kbd->kb_keymap->n_keys > ALTGR_OFFSET) { 387 if (i & ALKED) 388 i |= CLKED; 389 else 390 i &= ~CLKED; 391 } 392 if (KBD_HAS_DEVICE(kbd)) 393 kmi_set_leds(sc, i); 394 395 KBD_LED_VAL(kbd) = *(int *)arg; 396 break; 397 case KDGKBSTATE: /* get lock key state */ 398 *(int *)arg = sc->sc_state & LOCK_MASK; 399 break; 400#if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \ 401 defined(COMPAT_FREEBSD4) || defined(COMPAT_43) 402 case _IO('K', 20): 403 ival = IOCPARM_IVAL(arg); 404 arg = (caddr_t)&ival; 405 /* FALLTHROUGH */ 406#endif 407 case KDSKBSTATE: /* set lock key state */ 408 if (*(int *)arg & ~LOCK_MASK) { 409 return (EINVAL); 410 } 411 sc->sc_state &= ~LOCK_MASK; 412 sc->sc_state |= *(int *)arg; 413 414 /* set LEDs and quit */ 415 return (kmi_ioctl(kbd, KDSETLED, arg)); 416 417 case KDSETREPEAT: /* set keyboard repeat rate (new 418 * interface) */ 419 if (!KBD_HAS_DEVICE(kbd)) { 420 return (0); 421 } 422 if (((int *)arg)[1] < 0) { 423 return (EINVAL); 424 } 425 if (((int *)arg)[0] < 0) { 426 return (EINVAL); 427 } 428 if (((int *)arg)[0] < 200) /* fastest possible value */ 429 kbd->kb_delay1 = 200; 430 else 431 kbd->kb_delay1 = ((int *)arg)[0]; 432 kbd->kb_delay2 = ((int *)arg)[1]; 433 return (0); 434 435#if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \ 436 defined(COMPAT_FREEBSD4) || defined(COMPAT_43) 437 case _IO('K', 67): 438 ival = IOCPARM_IVAL(arg); 439 arg = (caddr_t)&ival; 440 /* FALLTHROUGH */ 441#endif 442 case KDSETRAD: /* set keyboard repeat rate (old 443 * interface) */ 444 return (kmi_set_typematic(kbd, *(int *)arg)); 445 446 case PIO_KEYMAP: /* set keyboard translation table */ 447 case OPIO_KEYMAP: /* set keyboard translation table 448 * (compat) */ 449 case PIO_KEYMAPENT: /* set keyboard translation table 450 * entry */ 451 case PIO_DEADKEYMAP: /* set accent key translation table */ 452 sc->sc_accents = 0; 453 /* FALLTHROUGH */ 454 default: 455 return (genkbd_commonioctl(kbd, cmd, arg)); 456 } 457 458 return (0); 459} 460 461static int 462kmi_ioctl(keyboard_t *kbd, u_long cmd, caddr_t arg) 463{ 464 int result; 465 466 /* 467 * XXX KDGKBSTATE, KDSKBSTATE and KDSETLED can be called from any 468 * context where printf(9) can be called, which among other things 469 * includes interrupt filters and threads with any kinds of locks 470 * already held. For this reason it would be dangerous to acquire 471 * the Giant here unconditionally. On the other hand we have to 472 * have it to handle the ioctl. 473 * So we make our best effort to auto-detect whether we can grab 474 * the Giant or not. Blame syscons(4) for this. 475 */ 476 switch (cmd) { 477 case KDGKBSTATE: 478 case KDSKBSTATE: 479 case KDSETLED: 480 if (!mtx_owned(&Giant) && !SCHEDULER_STOPPED()) 481 return (EDEADLK); /* best I could come up with */ 482 /* FALLTHROUGH */ 483 default: 484 KMI_LOCK(); 485 result = kmi_ioctl_locked(kbd, cmd, arg); 486 KMI_UNLOCK(); 487 return (result); 488 } 489} 490 491/* clear the internal state of the keyboard */ 492static void 493kmi_clear_state(keyboard_t *kbd) 494{ 495 struct kmi_softc *sc = kbd->kb_data; 496 497 KMI_CTX_LOCK_ASSERT(); 498 499 sc->sc_flags &= ~(KMI_FLAG_COMPOSE | KMI_FLAG_POLLING); 500 sc->sc_state &= LOCK_MASK; /* preserve locking key state */ 501 sc->sc_accents = 0; 502} 503 504/* save the internal state, not used */ 505static int 506kmi_get_state(keyboard_t *kbd, void *buf, size_t len) 507{ 508 return (len == 0) ? 1 : -1; 509} 510 511/* set the internal state, not used */ 512static int 513kmi_set_state(keyboard_t *kbd, void *buf, size_t len) 514{ 515 return (EINVAL); 516} 517 518static int 519kmi_poll(keyboard_t *kbd, int on) 520{ 521 struct kmi_softc *sc = kbd->kb_data; 522 523 KMI_LOCK(); 524 if (on) { 525 sc->sc_flags |= KMI_FLAG_POLLING; 526 sc->sc_poll_thread = curthread; 527 } else { 528 sc->sc_flags &= ~KMI_FLAG_POLLING; 529 } 530 KMI_UNLOCK(); 531 532 return (0); 533} 534 535/* local functions */ 536 537static void 538kmi_set_leds(struct kmi_softc *sc, uint8_t leds) 539{ 540 541 KMI_LOCK_ASSERT(); 542 543 /* start transfer, if not already started */ 544 printf("Implement me: %s\n", __func__); 545} 546 547static int 548kmi_set_typematic(keyboard_t *kbd, int code) 549{ 550 static const int delays[] = {250, 500, 750, 1000}; 551 static const int rates[] = {34, 38, 42, 46, 50, 55, 59, 63, 552 68, 76, 84, 92, 100, 110, 118, 126, 553 136, 152, 168, 184, 200, 220, 236, 252, 554 272, 304, 336, 368, 400, 440, 472, 504}; 555 556 if (code & ~0x7f) { 557 return (EINVAL); 558 } 559 kbd->kb_delay1 = delays[(code >> 5) & 3]; 560 kbd->kb_delay2 = rates[code & 0x1f]; 561 return (0); 562} 563 564static keyboard_switch_t kmisw = { 565 .probe = &kmi_probe, 566 .init = &kmi_init, 567 .term = &kmi_term, 568 .intr = &kmi_intr, 569 .test_if = &kmi_test_if, 570 .enable = &kmi_enable, 571 .disable = &kmi_disable, 572 .read = &kmi_read, 573 .check = &kmi_check, 574 .read_char = &kmi_read_char, 575 .check_char = &kmi_check_char, 576 .ioctl = &kmi_ioctl, 577 .lock = &kmi_lock, 578 .clear_state = &kmi_clear_state, 579 .get_state = &kmi_get_state, 580 .set_state = &kmi_set_state, 581 .poll = &kmi_poll, 582}; 583 584KEYBOARD_DRIVER(kmi, kmisw, kmi_configure); 585 586static void 587pl050_kmi_intr(void *arg) 588{ 589 struct kmi_softc *sc = arg; 590 uint32_t c; 591 592 KMI_CTX_LOCK_ASSERT(); 593 594 if ((sc->sc_flags & KMI_FLAG_POLLING) != 0) 595 return; 596 597 if (KBD_IS_ACTIVE(&sc->sc_kbd) && 598 KBD_IS_BUSY(&sc->sc_kbd)) { 599 /* let the callback function process the input */ 600 (sc->sc_kbd.kb_callback.kc_func) (&sc->sc_kbd, KBDIO_KEYINPUT, 601 sc->sc_kbd.kb_callback.kc_arg); 602 } else { 603 /* read and discard the input, no one is waiting for it */ 604 do { 605 c = kmi_read_char_locked(&sc->sc_kbd, 0); 606 } while (c != NOKEY); 607 } 608 609} 610 611static int 612pl050_kmi_probe(device_t dev) 613{ 614 615 if (!ofw_bus_status_okay(dev)) 616 return (ENXIO); 617 618 /* 619 * PL050 is plain PS2 port that pushes bytes to/from computer 620 * VersatilePB has two such ports and QEMU simulates keyboard 621 * connected to port #0 and mouse connected to port #1. This 622 * information can't be obtained from device tree so we just 623 * hardcode this knowledge here. We attach keyboard driver to 624 * port #0 and ignore port #1 625 */ 626 if (kmi_attached) 627 return (ENXIO); 628 629 if (ofw_bus_is_compatible(dev, "arm,pl050")) { 630 device_set_desc(dev, "PL050 Keyboard/Mouse Interface"); 631 return (BUS_PROBE_DEFAULT); 632 } 633 634 return (ENXIO); 635} 636 637static int 638pl050_kmi_attach(device_t dev) 639{ 640 struct kmi_softc *sc = device_get_softc(dev); 641 keyboard_t *kbd; 642 int rid; 643 int i; 644 uint32_t ack; 645 646 sc->sc_dev = dev; 647 kbd = &sc->sc_kbd; 648 rid = 0; 649 650 sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE); 651 if (sc->sc_mem_res == NULL) { 652 device_printf(dev, "could not allocate memory resource\n"); 653 return (ENXIO); 654 } 655 656 /* Request the IRQ resources */ 657 sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE); 658 if (sc->sc_irq_res == NULL) { 659 device_printf(dev, "Error: could not allocate irq resources\n"); 660 return (ENXIO); 661 } 662 663 /* Setup and enable the timer */ 664 if (bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_CLK, 665 NULL, pl050_kmi_intr, sc, 666 &sc->sc_intr_hl) != 0) { 667 bus_release_resource(dev, SYS_RES_IRQ, rid, 668 sc->sc_irq_res); 669 device_printf(dev, "Unable to setup the clock irq handler.\n"); 670 return (ENXIO); 671 } 672 673 /* TODO: clock & divisor */ 674 675 pl050_kmi_write_4(sc, KMICR, KMICR_EN); 676 677 pl050_kmi_write_4(sc, KMIDATA, SET_SCANCODE_SET); 678 /* read out ACK */ 679 ack = pl050_kmi_read_4(sc, KMIDATA); 680 /* Set Scan Code set 1 (XT) */ 681 pl050_kmi_write_4(sc, KMIDATA, 1); 682 /* read out ACK */ 683 ack = pl050_kmi_read_4(sc, KMIDATA); 684 685 pl050_kmi_write_4(sc, KMICR, KMICR_EN | KMICR_RXINTREN); 686 687 kbd_init_struct(kbd, KMI_DRIVER_NAME, KB_OTHER, 688 device_get_unit(dev), 0, 0, 0); 689 kbd->kb_data = (void *)sc; 690 691 sc->sc_keymap = key_map; 692 sc->sc_accmap = accent_map; 693 for (i = 0; i < KMI_NFKEY; i++) { 694 sc->sc_fkeymap[i] = fkey_tab[i]; 695 } 696 697 kbd_set_maps(kbd, &sc->sc_keymap, &sc->sc_accmap, 698 sc->sc_fkeymap, KMI_NFKEY); 699 700 KBD_FOUND_DEVICE(kbd); 701 kmi_clear_state(kbd); 702 KBD_PROBE_DONE(kbd); 703 704 KBD_INIT_DONE(kbd); 705 706 if (kbd_register(kbd) < 0) { 707 goto detach; 708 } 709 KBD_CONFIG_DONE(kbd); 710 711#ifdef KBD_INSTALL_CDEV 712 if (kbd_attach(kbd)) { 713 goto detach; 714 } 715#endif 716 717 if (bootverbose) { 718 kbdd_diag(kbd, bootverbose); 719 } 720 kmi_attached = 1; 721 return (0); 722 723detach: 724 return (ENXIO); 725 726} 727 728static device_method_t pl050_kmi_methods[] = { 729 DEVMETHOD(device_probe, pl050_kmi_probe), 730 DEVMETHOD(device_attach, pl050_kmi_attach), 731 { 0, 0 } 732}; 733 734static driver_t pl050_kmi_driver = { 735 "kmi", 736 pl050_kmi_methods, 737 sizeof(struct kmi_softc), 738}; 739 740static devclass_t pl050_kmi_devclass; 741 742DRIVER_MODULE(pl050_kmi, simplebus, pl050_kmi_driver, pl050_kmi_devclass, 0, 0); 743