The Regents of the University of California. All rights reserved.
This code is derived from software contributed to Berkeley by
Chris Torek and the American National Standards Committee X3,
on Information Processing Systems.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the University nor the names of its contributors
may be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
@(#)scanf.3 8.2 (Berkeley) 12/11/93
FreeBSD: src/lib/libc/stdio/scanf.3,v 1.24 2003/06/28 09:03:25 das Exp
$FreeBSD$
.Dd July 5, 2003 .Dt WSCANF 3 .Os .Sh NAME .Nm wscanf , .Nm fwscanf , .Nm swscanf , .Nm vwscanf , .Nm vswscanf , .Nm vfwscanf .Nd wide character input format conversion .Sh LIBRARY .Lb libc .Sh SYNOPSIS n stdio.h n wchar.h .Ft int .Fn wscanf "const wchar_t * restrict format" ... .Ft int .Fn fwscanf "FILE * restrict stream" "const wchar_t * restrict format" ... .Ft int .Fn swscanf "const wchar_t * restrict str" "const wchar_t * restrict format" ... n stdarg.h .Ft int .Fn vwscanf "const wchar_t * restrict format" "va_list ap" .Ft int .Fn vswscanf "const wchar_t * restrict str" "const wchar_t * restrict format" "va_list ap" .Ft int .Fn vfwscanf "FILE * restrict stream" "const wchar_t * restrict format" "va_list ap" .Sh DESCRIPTION The .Fn wscanf family of functions scans input according to a .Fa format as described below. This format may contain .Em conversion specifiers ; the results from such conversions, if any, are stored through the .Em pointer arguments. The .Fn wscanf function reads input from the standard input stream .Dv stdin , .Fn fwscanf reads input from the stream pointer .Fa stream , and .Fn swscanf reads its input from the wide character string pointed to by .Fa str . The .Fn vfwscanf function is analogous to .Xr vfwprintf 3 and reads input from the stream pointer .Fa stream using a variable argument list of pointers (see .Xr stdarg 3 ) . The .Fn vwscanf function scans a variable argument list from the standard input and the .Fn vswscanf function scans it from a wide character string; these are analogous to the .Fn vwprintf and .Fn vswprintf functions respectively. Each successive .Em pointer argument must correspond properly with each successive conversion specifier (but see the .Cm * conversion below). All conversions are introduced by the .Cm % (percent sign) character. The .Fa format string may also contain other characters. White space (such as blanks, tabs, or newlines) in the .Fa format string match any amount of white space, including none, in the input. Everything else matches only itself. Scanning stops when an input character does not match such a format character. Scanning also stops when an input conversion cannot be made (see below). .Sh CONVERSIONS Following the .Cm % character introducing a conversion there may be a number of .Em flag characters, as follows: l -tag -width ".Cm l No (ell)" t Cm * Suppresses assignment. The conversion that follows occurs as usual, but no pointer is used; the result of the conversion is simply discarded. t Cm hh Indicates that the conversion will be one of .Cm dioux or .Cm n and the next pointer is a pointer to a .Vt char (rather than .Vt int ) . t Cm h Indicates that the conversion will be one of .Cm dioux or .Cm n and the next pointer is a pointer to a .Vt "short int" (rather than .Vt int ) . t Cm l No (ell) Indicates that the conversion will be one of .Cm dioux or .Cm n and the next pointer is a pointer to a .Vt "long int" (rather than .Vt int ) , that the conversion will be one of .Cm a , e , f , or .Cm g and the next pointer is a pointer to .Vt double (rather than .Vt float ) , or that the conversion will be one of .Cm c or .Cm s and the next pointer is a pointer to an array of .Vt wchar_t (rather than .Vt char ) . t Cm ll No (ell ell) Indicates that the conversion will be one of .Cm dioux or .Cm n and the next pointer is a pointer to a .Vt "long long int" (rather than .Vt int ) . t Cm L Indicates that the conversion will be one of .Cm a , e , f , or .Cm g and the next pointer is a pointer to .Vt "long double" . t Cm j Indicates that the conversion will be one of .Cm dioux or .Cm n and the next pointer is a pointer to a .Vt intmax_t (rather than .Vt int ) . t Cm t Indicates that the conversion will be one of .Cm dioux or .Cm n and the next pointer is a pointer to a .Vt ptrdiff_t (rather than .Vt int ) . t Cm z Indicates that the conversion will be one of .Cm dioux or .Cm n and the next pointer is a pointer to a .Vt size_t (rather than .Vt int ) . t Cm q (deprecated.) Indicates that the conversion will be one of .Cm dioux or .Cm n and the next pointer is a pointer to a .Vt "long long int" (rather than .Vt int ) . .El
p In addition to these flags, there may be an optional maximum field width, expressed as a decimal integer, between the .Cm % and the conversion. If no width is given, a default of .Dq infinity is used (with one exception, below); otherwise at most this many characters are scanned in processing the conversion. Before conversion begins, most conversions skip white space; this white space is not counted against the field width.
p The following conversions are available: l -tag -width XXXX t Cm % Matches a literal .Ql % . That is, .Dq Li %% in the format string matches a single input .Ql % character. No conversion is done, and assignment does not occur. t Cm d Matches an optionally signed decimal integer; the next pointer must be a pointer to .Vt int . t Cm i Matches an optionally signed integer; the next pointer must be a pointer to .Vt int . The integer is read in base 16 if it begins with .Ql 0x or .Ql 0X , in base 8 if it begins with .Ql 0 , and in base 10 otherwise. Only characters that correspond to the base are used. t Cm o Matches an octal integer; the next pointer must be a pointer to .Vt "unsigned int" . t Cm u Matches an optionally signed decimal integer; the next pointer must be a pointer to .Vt "unsigned int" . t Cm x , X Matches an optionally signed hexadecimal integer; the next pointer must be a pointer to .Vt "unsigned int" . t Cm a , A , e , E , f , F , g , G Matches a floating-point number in the style of .Xr wcstod 3 . The next pointer must be a pointer to .Vt float (unless .Cm l or .Cm L is specified.) t Cm s Matches a sequence of non-white-space wide characters; the next pointer must be a pointer to .Vt char , and the array must be large enough to accept the multibyte representation of all the sequence and the terminating .Dv NUL character. The input string stops at white space or at the maximum field width, whichever occurs first.
p If an .Cm l qualifier is present, the next pointer must be a pointer to .Vt wchar_t , into which the input will be placed. t Cm S The same as .Cm ls . t Cm c Matches a sequence of .Em width count wide characters (default 1); the next pointer must be a pointer to .Vt char , and there must be enough room for the multibyte representation of all the characters (no terminating .Dv NUL is added). The usual skip of leading white space is suppressed. To skip white space first, use an explicit space in the format.
p If an .Cm l qualifier is present, the next pointer must be a pointer to .Vt wchar_t , into which the input will be placed. t Cm C The same as .Cm lc . t Cm [ Matches a nonempty sequence of characters from the specified set of accepted characters; the next pointer must be a pointer to .Vt char , and there must be enough room for the multibyte representation of all the characters in the string, plus a terminating .Dv NUL character. The usual skip of leading white space is suppressed. The string is to be made up of characters in (or not in) a particular set; the set is defined by the characters between the open bracket .Cm [ character and a close bracket .Cm ] character. The set .Em excludes those characters if the first character after the open bracket is a circumflex .Cm ^ . To include a close bracket in the set, make it the first character after the open bracket or the circumflex; any other position will end the set. To include a hyphen in the set, make it the last character before the final close bracket; some implementations of .Fn wscanf use .Dq Li A-Z to represent the range of characters between .Ql A and .Ql Z . The string ends with the appearance of a character not in the (or, with a circumflex, in) set or when the field width runs out.
p If an .Cm l qualifier is present, the next pointer must be a pointer to .Vt wchar_t , into which the input will be placed. t Cm p Matches a pointer value (as printed by .Ql %p in .Xr wprintf 3 ) ; the next pointer must be a pointer to .Vt void . t Cm n Nothing is expected; instead, the number of characters consumed thus far from the input is stored through the next pointer, which must be a pointer to .Vt int . This is .Em not a conversion, although it can be suppressed with the .Cm * flag. .El
p The decimal point character is defined in the program's locale (category .Dv LC_NUMERIC ) .
p For backwards compatibility, a .Dq conversion of .Ql %\e0 causes an immediate return of .Dv EOF . .Sh RETURN VALUES These functions return the number of input items assigned, which can be fewer than provided for, or even zero, in the event of a matching failure. Zero indicates that, while there was input available, no conversions were assigned; typically this is due to an invalid input character, such as an alphabetic character for a .Ql %d conversion. The value .Dv EOF is returned if an input failure occurs before any conversion such as an end-of-file occurs. If an error or end-of-file occurs after conversion has begun, the number of conversions which were successfully completed is returned. .Sh SEE ALSO .Xr fgetwc 3 , .Xr scanf 3 , .Xr wcrtomb 3 , .Xr wcstod 3 , .Xr wcstol 3 , .Xr wcstoul 3 , .Xr wprintf 3 .Sh STANDARDS The .Fn fwscanf , .Fn wscanf , .Fn swscanf , .Fn vfwscanf , .Fn vwscanf and .Fn vswscanf functions conform to .St -isoC-99 . .Sh BUGS In addition to the bugs documented in .Xr scanf 3 , .Fn wscanf does not support the .Dq Li A-Z notation for specifying character ranges with the character class conversion
q Sq Cm %[ .