1/* $FreeBSD$ */
2/*-
3 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
4 *
5 * Copyright (c) 2008-2009 Hans Petter Selasky. All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 *    notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 *    notice, this list of conditions and the following disclaimer in the
14 *    documentation and/or other materials provided with the distribution.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26 * SUCH DAMAGE.
27 */
28
29#include <stdio.h>
30#include <stdlib.h>
31#include <stdint.h>
32#include <err.h>
33#include <string.h>
34#include <pwd.h>
35#include <grp.h>
36#include <errno.h>
37#include <ctype.h>
38#include <sys/types.h>
39
40#include <libusb20_desc.h>
41#include <libusb20.h>
42
43#include "dump.h"
44
45struct options {
46	const char *quirkname;
47	void   *buffer;
48	int template;
49	gid_t	gid;
50	uid_t	uid;
51	mode_t	mode;
52	uint32_t got_any;
53	struct LIBUSB20_CONTROL_SETUP_DECODED setup;
54	uint16_t bus;
55	uint16_t addr;
56	uint16_t iface;
57	uint16_t vid;
58	uint16_t pid;
59	uint16_t lo_rev;		/* inclusive */
60	uint16_t hi_rev;		/* inclusive */
61	uint8_t	string_index;
62	uint8_t	config_index;
63	uint8_t	alt_index;
64	uint8_t	got_list:1;
65	uint8_t	got_bus:1;
66	uint8_t	got_addr:1;
67	uint8_t	got_iface:1;
68	uint8_t	got_set_config:1;
69	uint8_t	got_set_alt:1;
70	uint8_t	got_set_template:1;
71	uint8_t	got_get_template:1;
72	uint8_t	got_suspend:1;
73	uint8_t	got_resume:1;
74	uint8_t	got_reset:1;
75	uint8_t	got_power_off:1;
76	uint8_t	got_power_save:1;
77	uint8_t	got_power_on:1;
78	uint8_t	got_dump_device_quirks:1;
79	uint8_t	got_dump_quirk_names:1;
80	uint8_t	got_dump_all_desc:1;
81	uint8_t	got_dump_device_desc:1;
82	uint8_t	got_dump_curr_config:1;
83	uint8_t	got_dump_all_config:1;
84	uint8_t	got_dump_info:1;
85  	uint8_t	got_dump_stats:1;
86	uint8_t	got_show_iface_driver:1;
87	uint8_t	got_remove_device_quirk:1;
88	uint8_t	got_add_device_quirk:1;
89	uint8_t	got_remove_quirk:1;
90	uint8_t	got_add_quirk:1;
91	uint8_t	got_dump_string:1;
92	uint8_t	got_do_request:1;
93	uint8_t	got_detach_kernel_driver:1;
94};
95
96struct token {
97	const char *name;
98	uint8_t	value;
99	uint8_t	narg;
100};
101
102enum {
103	T_UNIT,
104	T_ADDR,
105	T_UGEN,
106	T_IFACE,
107	T_SET_CONFIG,
108	T_SET_ALT,
109	T_SET_TEMPLATE,
110	T_GET_TEMPLATE,
111	T_ADD_DEVICE_QUIRK,
112	T_REMOVE_DEVICE_QUIRK,
113	T_ADD_QUIRK,
114	T_REMOVE_QUIRK,
115	T_SHOW_IFACE_DRIVER,
116	T_DETACH_KERNEL_DRIVER,
117	T_DUMP_QUIRK_NAMES,
118	T_DUMP_DEVICE_QUIRKS,
119	T_DUMP_ALL_DESC,
120	T_DUMP_DEVICE_DESC,
121	T_DUMP_CURR_CONFIG_DESC,
122	T_DUMP_ALL_CONFIG_DESC,
123	T_DUMP_STRING,
124	T_DUMP_INFO,
125	T_DUMP_STATS,
126	T_SUSPEND,
127	T_RESUME,
128	T_POWER_OFF,
129	T_POWER_SAVE,
130	T_POWER_ON,
131	T_RESET,
132	T_LIST,
133	T_DO_REQUEST,
134};
135
136static struct options options;
137
138static const struct token token[] = {
139	{"-u", T_UNIT, 1},
140	{"-a", T_ADDR, 1},
141	{"-d", T_UGEN, 1},
142	{"-i", T_IFACE, 1},
143	{"set_config", T_SET_CONFIG, 1},
144	{"set_alt", T_SET_ALT, 1},
145	{"set_template", T_SET_TEMPLATE, 1},
146	{"get_template", T_GET_TEMPLATE, 0},
147	{"add_dev_quirk_vplh", T_ADD_DEVICE_QUIRK, 5},
148	{"remove_dev_quirk_vplh", T_REMOVE_DEVICE_QUIRK, 5},
149	{"add_quirk", T_ADD_QUIRK, 1},
150	{"remove_quirk", T_REMOVE_QUIRK, 1},
151	{"detach_kernel_driver", T_DETACH_KERNEL_DRIVER, 0},
152	{"dump_quirk_names", T_DUMP_QUIRK_NAMES, 0},
153	{"dump_device_quirks", T_DUMP_DEVICE_QUIRKS, 0},
154	{"dump_all_desc", T_DUMP_ALL_DESC, 0},
155	{"dump_device_desc", T_DUMP_DEVICE_DESC, 0},
156	{"dump_curr_config_desc", T_DUMP_CURR_CONFIG_DESC, 0},
157	{"dump_all_config_desc", T_DUMP_ALL_CONFIG_DESC, 0},
158	{"dump_string", T_DUMP_STRING, 1},
159	{"dump_info", T_DUMP_INFO, 0},
160	{"dump_stats", T_DUMP_STATS, 0},
161	{"show_ifdrv", T_SHOW_IFACE_DRIVER, 0},
162	{"suspend", T_SUSPEND, 0},
163	{"resume", T_RESUME, 0},
164	{"power_off", T_POWER_OFF, 0},
165	{"power_save", T_POWER_SAVE, 0},
166	{"power_on", T_POWER_ON, 0},
167	{"reset", T_RESET, 0},
168	{"list", T_LIST, 0},
169	{"do_request", T_DO_REQUEST, 5},
170};
171
172static void
173be_dev_remove_quirk(struct libusb20_backend *pbe,
174    uint16_t vid, uint16_t pid, uint16_t lorev, uint16_t hirev,
175    const char *str)
176{
177	struct libusb20_quirk q;
178	int error;
179
180	memset(&q, 0, sizeof(q));
181
182	q.vid = vid;
183	q.pid = pid;
184	q.bcdDeviceLow = lorev;
185	q.bcdDeviceHigh = hirev;
186	strlcpy(q.quirkname, str, sizeof(q.quirkname));
187
188	error = libusb20_be_remove_dev_quirk(pbe, &q);
189	if (error) {
190		fprintf(stderr, "Removing quirk '%s' failed, continuing.\n", str);
191	}
192	return;
193}
194
195static void
196be_dev_add_quirk(struct libusb20_backend *pbe,
197    uint16_t vid, uint16_t pid, uint16_t lorev, uint16_t hirev,
198    const char *str)
199{
200	struct libusb20_quirk q;
201	int error;
202
203	memset(&q, 0, sizeof(q));
204
205	q.vid = vid;
206	q.pid = pid;
207	q.bcdDeviceLow = lorev;
208	q.bcdDeviceHigh = hirev;
209	strlcpy(q.quirkname, str, sizeof(q.quirkname));
210
211	error = libusb20_be_add_dev_quirk(pbe, &q);
212	if (error) {
213		fprintf(stderr, "Adding quirk '%s' failed, continuing.\n", str);
214	}
215	return;
216}
217
218static uint8_t
219get_token(const char *str, uint8_t narg)
220{
221	uint8_t n;
222
223	for (n = 0; n != (sizeof(token) / sizeof(token[0])); n++) {
224		if (strcasecmp(str, token[n].name) == 0) {
225			if (token[n].narg > narg) {
226				/* too few arguments */
227				break;
228			}
229			return (token[n].value);
230		}
231	}
232	return (0 - 1);
233}
234
235static uid_t
236num_id(const char *name, const char *type)
237{
238	uid_t val;
239	char *ep;
240
241	errno = 0;
242	val = strtoul(name, &ep, 0);
243	if (errno) {
244		err(1, "%s", name);
245	}
246	if (*ep != '\0') {
247		errx(1, "%s: illegal %s name", name, type);
248	}
249	return (val);
250}
251
252static int
253get_int(const char *s)
254{
255	int val;
256	char *ep;
257
258	errno = 0;
259	val = strtoul(s, &ep, 0);
260	if (errno) {
261		err(1, "%s", s);
262	}
263	if (*ep != '\0') {
264		errx(1, "illegal number: %s", s);
265	}
266	return val;
267}
268
269static void
270duplicate_option(const char *ptr)
271{
272	fprintf(stderr, "Syntax error: "
273	    "Duplicate option: '%s'\n", ptr);
274	exit(1);
275}
276
277static void
278usage(void)
279{
280	fprintf(stderr, ""
281	    "usbconfig - configure the USB subsystem" "\n"
282	    "usage: usbconfig -u <busnum> -a <devaddr> -i <ifaceindex> [cmds...]" "\n"
283	    "usage: usbconfig -d [ugen]<busnum>.<devaddr> -i <ifaceindex> [cmds...]" "\n"
284	    "commands:" "\n"
285	    "  set_config <cfg_index>" "\n"
286	    "  set_alt <alt_index>" "\n"
287	    "  set_template <template>" "\n"
288	    "  get_template" "\n"
289	    "  add_dev_quirk_vplh <vid> <pid> <lo_rev> <hi_rev> <quirk>" "\n"
290	    "  remove_dev_quirk_vplh <vid> <pid> <lo_rev> <hi_rev> <quirk>" "\n"
291	    "  add_quirk <quirk>" "\n"
292	    "  remove_quirk <quirk>" "\n"
293	    "  detach_kernel_driver" "\n"
294	    "  dump_quirk_names" "\n"
295	    "  dump_device_quirks" "\n"
296	    "  dump_all_desc" "\n"
297	    "  dump_device_desc" "\n"
298	    "  dump_curr_config_desc" "\n"
299	    "  dump_all_config_desc" "\n"
300	    "  dump_string <index>" "\n"
301	    "  dump_info" "\n"
302	    "  dump_stats" "\n"
303	    "  show_ifdrv" "\n"
304	    "  suspend" "\n"
305	    "  resume" "\n"
306	    "  power_off" "\n"
307	    "  power_save" "\n"
308	    "  power_on" "\n"
309	    "  reset" "\n"
310	    "  list" "\n"
311	    "  do_request <bmReqTyp> <bReq> <wVal> <wIdx> <wLen> <data...>" "\n"
312	);
313	exit(1);
314}
315
316static void
317reset_options(struct options *opt)
318{
319	if (opt->buffer)
320		free(opt->buffer);
321	memset(opt, 0, sizeof(*opt));
322	return;
323}
324
325static void
326flush_command(struct libusb20_backend *pbe, struct options *opt)
327{
328	struct libusb20_device *pdev = NULL;
329	uint32_t matches = 0;
330	uint8_t dump_any;
331
332	/* check for invalid option combinations */
333	if ((opt->got_suspend +
334	    opt->got_resume +
335	    opt->got_reset +
336	    opt->got_set_config +
337	    opt->got_set_alt +
338	    opt->got_power_save +
339	    opt->got_power_on +
340	    opt->got_power_off) > 1) {
341		err(1, "can only specify one of 'set_config', "
342		    "'set_alt', 'reset', 'suspend', 'resume', "
343		    "'power_save', 'power_on' and 'power_off' "
344		    "at the same time!");
345	}
346	if (opt->got_dump_quirk_names) {
347		opt->got_any--;
348		dump_be_quirk_names(pbe);
349	}
350	if (opt->got_dump_device_quirks) {
351		opt->got_any--;
352		dump_be_dev_quirks(pbe);
353	}
354	if (opt->got_remove_device_quirk) {
355		opt->got_any--;
356		be_dev_remove_quirk(pbe,
357		    opt->vid, opt->pid, opt->lo_rev, opt->hi_rev, opt->quirkname);
358	}
359	if (opt->got_add_device_quirk) {
360		opt->got_any--;
361		be_dev_add_quirk(pbe,
362		    opt->vid, opt->pid, opt->lo_rev, opt->hi_rev, opt->quirkname);
363	}
364	if (opt->got_set_template) {
365		opt->got_any--;
366		if (libusb20_be_set_template(pbe, opt->template)) {
367			fprintf(stderr, "Setting USB template %u failed, "
368			    "continuing.\n", opt->template);
369		}
370	}
371	if (opt->got_get_template) {
372		opt->got_any--;
373		if (libusb20_be_get_template(pbe, &opt->template))
374			printf("USB template: <unknown>\n");
375		else
376			printf("USB template: %u\n", opt->template);
377	}
378	if (opt->got_any == 0) {
379		/*
380		 * do not scan through all the devices if there are no valid
381		 * options
382		 */
383		goto done;
384	}
385	while ((pdev = libusb20_be_device_foreach(pbe, pdev))) {
386
387		if (opt->got_bus &&
388		    (libusb20_dev_get_bus_number(pdev) != opt->bus)) {
389			continue;
390		}
391		if (opt->got_addr &&
392		    (libusb20_dev_get_address(pdev) != opt->addr)) {
393			continue;
394		}
395		matches++;
396
397		if (opt->got_remove_quirk) {
398			struct LIBUSB20_DEVICE_DESC_DECODED *ddesc;
399
400			ddesc = libusb20_dev_get_device_desc(pdev);
401
402			be_dev_remove_quirk(pbe,
403			    ddesc->idVendor, ddesc->idProduct,
404			    ddesc->bcdDevice, ddesc->bcdDevice,
405			    opt->quirkname);
406		}
407
408		if (opt->got_add_quirk) {
409			struct LIBUSB20_DEVICE_DESC_DECODED *ddesc;
410
411			ddesc = libusb20_dev_get_device_desc(pdev);
412
413			be_dev_add_quirk(pbe,
414			    ddesc->idVendor, ddesc->idProduct,
415			    ddesc->bcdDevice, ddesc->bcdDevice,
416			    opt->quirkname);
417		}
418
419		if (libusb20_dev_open(pdev, 0)) {
420			err(1, "could not open device");
421		}
422		if (opt->got_dump_string) {
423			dump_string_by_index(pdev, opt->string_index);
424		}
425		if (opt->got_do_request) {
426			uint16_t actlen;
427			uint16_t t;
428
429			if (libusb20_dev_request_sync(pdev, &opt->setup,
430			    opt->buffer, &actlen, 5000 /* 5 seconds */ , 0)) {
431				printf("REQUEST = <ERROR>\n");
432			} else if (!(opt->setup.bmRequestType &
433			    LIBUSB20_ENDPOINT_IN)) {
434				printf("REQUEST = <OK>\n");
435			} else {
436				t = actlen;
437				printf("REQUEST = <");
438				for (t = 0; t != actlen; t++) {
439					printf("0x%02x%s",
440					    ((uint8_t *)opt->buffer)[t],
441					    (t == (actlen - 1)) ? "" : " ");
442				}
443				printf("><");
444				for (t = 0; t != actlen; t++) {
445					char c;
446
447					c = ((uint8_t *)opt->buffer)[t];
448					if ((c != '<') &&
449					    (c != '>') && isprint(c)) {
450						putchar(c);
451					}
452				}
453				printf(">\n");
454			}
455		}
456		if (opt->got_set_config) {
457			if (libusb20_dev_set_config_index(pdev,
458			    opt->config_index)) {
459				err(1, "could not set config index");
460			}
461		}
462		if (opt->got_set_alt) {
463			if (libusb20_dev_set_alt_index(pdev, opt->iface,
464			    opt->alt_index)) {
465				err(1, "could not set alternate setting");
466			}
467		}
468		if (opt->got_reset) {
469			if (libusb20_dev_reset(pdev)) {
470				err(1, "could not reset device");
471			}
472		}
473		if (opt->got_suspend) {
474			if (libusb20_dev_set_power_mode(pdev,
475			    LIBUSB20_POWER_SUSPEND)) {
476				err(1, "could not set suspend");
477			}
478		}
479		if (opt->got_resume) {
480			if (libusb20_dev_set_power_mode(pdev,
481			    LIBUSB20_POWER_RESUME)) {
482				err(1, "could not set resume");
483			}
484		}
485		if (opt->got_power_off) {
486			if (libusb20_dev_set_power_mode(pdev,
487			    LIBUSB20_POWER_OFF)) {
488				err(1, "could not set power OFF");
489			}
490		}
491		if (opt->got_power_save) {
492			if (libusb20_dev_set_power_mode(pdev,
493			    LIBUSB20_POWER_SAVE)) {
494				err(1, "could not set power SAVE");
495			}
496		}
497		if (opt->got_power_on) {
498			if (libusb20_dev_set_power_mode(pdev,
499			    LIBUSB20_POWER_ON)) {
500				err(1, "could not set power ON");
501			}
502		}
503		if (opt->got_detach_kernel_driver) {
504			if (libusb20_dev_detach_kernel_driver(pdev, opt->iface)) {
505				err(1, "could not detach kernel driver");
506			}
507		}
508		dump_any =
509		    (opt->got_dump_all_desc ||
510		    opt->got_dump_device_desc ||
511		    opt->got_dump_curr_config ||
512		    opt->got_dump_all_config ||
513		    opt->got_dump_info ||
514		    opt->got_dump_stats);
515
516		if (opt->got_list || dump_any) {
517			dump_device_info(pdev,
518			    opt->got_show_iface_driver);
519		}
520		if (opt->got_dump_device_desc) {
521			printf("\n");
522			dump_device_desc(pdev);
523		}
524		if (opt->got_dump_all_config) {
525			printf("\n");
526			dump_config(pdev, 1);
527		} else if (opt->got_dump_curr_config) {
528			printf("\n");
529			dump_config(pdev, 0);
530		} else if (opt->got_dump_all_desc) {
531			printf("\n");
532			dump_device_desc(pdev);
533			dump_config(pdev, 1);
534		}
535		if (opt->got_dump_stats) {
536			printf("\n");
537			dump_device_stats(pdev);
538		}
539		if (dump_any) {
540			printf("\n");
541		}
542		if (libusb20_dev_close(pdev)) {
543			err(1, "could not close device");
544		}
545	}
546
547	if (matches == 0) {
548		printf("No device match or lack of permissions.\n");
549	}
550done:
551	reset_options(opt);
552
553	return;
554}
555
556int
557main(int argc, char **argv)
558{
559	struct libusb20_backend *pbe;
560	struct options *opt = &options;
561	const char *ptr;
562	int unit;
563	int addr;
564	int n;
565	int t;
566
567	if (argc < 1) {
568		usage();
569	}
570	pbe = libusb20_be_alloc_default();
571	if (pbe == NULL)
572		err(1, "could not access USB backend\n");
573
574	for (n = 1; n != argc; n++) {
575
576		/* get number of additional options */
577		t = (argc - n - 1);
578		if (t > 255)
579			t = 255;
580		switch (get_token(argv[n], t)) {
581		case T_ADD_QUIRK:
582			if (opt->got_add_quirk) {
583				flush_command(pbe, opt);
584			}
585			opt->quirkname = argv[n + 1];
586			n++;
587
588			opt->got_add_quirk = 1;
589			opt->got_any++;
590			break;
591
592		case T_REMOVE_QUIRK:
593			if (opt->got_remove_quirk) {
594				flush_command(pbe, opt);
595			}
596			opt->quirkname = argv[n + 1];
597			n++;
598
599			opt->got_remove_quirk = 1;
600			opt->got_any++;
601			break;
602
603		case T_ADD_DEVICE_QUIRK:
604			if (opt->got_add_device_quirk) {
605				flush_command(pbe, opt);
606			}
607			opt->vid = num_id(argv[n + 1], "Vendor ID");
608			opt->pid = num_id(argv[n + 2], "Product ID");
609			opt->lo_rev = num_id(argv[n + 3], "Low Revision");
610			opt->hi_rev = num_id(argv[n + 4], "High Revision");
611			opt->quirkname = argv[n + 5];
612			n += 5;
613
614			opt->got_add_device_quirk = 1;
615			opt->got_any++;
616			break;
617
618		case T_REMOVE_DEVICE_QUIRK:
619			if (opt->got_remove_device_quirk) {
620				flush_command(pbe, opt);
621			}
622			opt->vid = num_id(argv[n + 1], "Vendor ID");
623			opt->pid = num_id(argv[n + 2], "Product ID");
624			opt->lo_rev = num_id(argv[n + 3], "Low Revision");
625			opt->hi_rev = num_id(argv[n + 4], "High Revision");
626			opt->quirkname = argv[n + 5];
627			n += 5;
628			opt->got_remove_device_quirk = 1;
629			opt->got_any++;
630			break;
631
632		case T_DETACH_KERNEL_DRIVER:
633			if (opt->got_detach_kernel_driver)
634				duplicate_option(argv[n]);
635			opt->got_detach_kernel_driver = 1;
636			opt->got_any++;
637			break;
638
639		case T_DUMP_QUIRK_NAMES:
640			if (opt->got_dump_quirk_names)
641				duplicate_option(argv[n]);
642			opt->got_dump_quirk_names = 1;
643			opt->got_any++;
644			break;
645
646		case T_DUMP_DEVICE_QUIRKS:
647			if (opt->got_dump_device_quirks)
648				duplicate_option(argv[n]);
649			opt->got_dump_device_quirks = 1;
650			opt->got_any++;
651			break;
652
653		case T_SHOW_IFACE_DRIVER:
654			opt->got_show_iface_driver = 1;
655			break;
656
657		case T_UGEN:
658			if (opt->got_any) {
659				/* allow multiple commands on the same line */
660				flush_command(pbe, opt);
661			}
662			ptr = argv[n + 1];
663
664			if ((ptr[0] == 'u') &&
665			    (ptr[1] == 'g') &&
666			    (ptr[2] == 'e') &&
667			    (ptr[3] == 'n'))
668				ptr += 4;
669
670			if ((sscanf(ptr, "%d.%d",
671			    &unit, &addr) != 2) ||
672			    (unit < 0) || (unit > 65535) ||
673			    (addr < 0) || (addr > 65535)) {
674				errx(1, "cannot "
675				    "parse '%s'", argv[n + 1]);
676			}
677			opt->bus = unit;
678			opt->addr = addr;
679			opt->got_bus = 1;
680			opt->got_addr = 1;
681			n++;
682			break;
683
684		case T_UNIT:
685			if (opt->got_any) {
686				/* allow multiple commands on the same line */
687				flush_command(pbe, opt);
688			}
689			opt->bus = num_id(argv[n + 1], "busnum");
690			opt->got_bus = 1;
691			n++;
692			break;
693		case T_ADDR:
694			opt->addr = num_id(argv[n + 1], "addr");
695			opt->got_addr = 1;
696			n++;
697			break;
698		case T_IFACE:
699			opt->iface = num_id(argv[n + 1], "iface");
700			opt->got_iface = 1;
701			n++;
702			break;
703		case T_SET_CONFIG:
704			if (opt->got_set_config)
705				duplicate_option(argv[n]);
706			opt->config_index = num_id(argv[n + 1], "cfg_index");
707			opt->got_set_config = 1;
708			opt->got_any++;
709			n++;
710			break;
711		case T_SET_ALT:
712			if (opt->got_set_alt)
713				duplicate_option(argv[n]);
714			opt->alt_index = num_id(argv[n + 1], "cfg_index");
715			opt->got_set_alt = 1;
716			opt->got_any++;
717			n++;
718			break;
719		case T_SET_TEMPLATE:
720			if (opt->got_set_template)
721				duplicate_option(argv[n]);
722			opt->template = get_int(argv[n + 1]);
723			opt->got_set_template = 1;
724			opt->got_any++;
725			n++;
726			break;
727		case T_GET_TEMPLATE:
728			if (opt->got_get_template)
729				duplicate_option(argv[n]);
730			opt->got_get_template = 1;
731			opt->got_any++;
732			break;
733		case T_DUMP_ALL_DESC:
734			if (opt->got_dump_all_desc)
735				duplicate_option(argv[n]);
736			opt->got_dump_all_desc = 1;
737			opt->got_any++;
738			break;
739		case T_DUMP_DEVICE_DESC:
740			if (opt->got_dump_device_desc)
741				duplicate_option(argv[n]);
742			opt->got_dump_device_desc = 1;
743			opt->got_any++;
744			break;
745		case T_DUMP_CURR_CONFIG_DESC:
746			if (opt->got_dump_curr_config)
747				duplicate_option(argv[n]);
748			opt->got_dump_curr_config = 1;
749			opt->got_any++;
750			break;
751		case T_DUMP_ALL_CONFIG_DESC:
752			if (opt->got_dump_all_config)
753				duplicate_option(argv[n]);
754			opt->got_dump_all_config = 1;
755			opt->got_any++;
756			break;
757		case T_DUMP_INFO:
758			if (opt->got_dump_info)
759				duplicate_option(argv[n]);
760			opt->got_dump_info = 1;
761			opt->got_any++;
762			break;
763		case T_DUMP_STATS:
764			if (opt->got_dump_stats)
765				duplicate_option(argv[n]);
766			opt->got_dump_stats = 1;
767			opt->got_any++;
768			break;
769		case T_DUMP_STRING:
770			if (opt->got_dump_string)
771				duplicate_option(argv[n]);
772			opt->string_index = num_id(argv[n + 1], "str_index");
773			opt->got_dump_string = 1;
774			opt->got_any++;
775			n++;
776			break;
777		case T_SUSPEND:
778			if (opt->got_suspend)
779				duplicate_option(argv[n]);
780			opt->got_suspend = 1;
781			opt->got_any++;
782			break;
783		case T_RESUME:
784			if (opt->got_resume)
785				duplicate_option(argv[n]);
786			opt->got_resume = 1;
787			opt->got_any++;
788			break;
789		case T_POWER_OFF:
790			if (opt->got_power_off)
791				duplicate_option(argv[n]);
792			opt->got_power_off = 1;
793			opt->got_any++;
794			break;
795		case T_POWER_SAVE:
796			if (opt->got_power_save)
797				duplicate_option(argv[n]);
798			opt->got_power_save = 1;
799			opt->got_any++;
800			break;
801		case T_POWER_ON:
802			if (opt->got_power_on)
803				duplicate_option(argv[n]);
804			opt->got_power_on = 1;
805			opt->got_any++;
806			break;
807		case T_RESET:
808			if (opt->got_reset)
809				duplicate_option(argv[n]);
810			opt->got_reset = 1;
811			opt->got_any++;
812			break;
813		case T_LIST:
814			if (opt->got_list)
815				duplicate_option(argv[n]);
816			opt->got_list = 1;
817			opt->got_any++;
818			break;
819		case T_DO_REQUEST:
820			if (opt->got_do_request)
821				duplicate_option(argv[n]);
822			LIBUSB20_INIT(LIBUSB20_CONTROL_SETUP, &opt->setup);
823			opt->setup.bmRequestType = num_id(argv[n + 1], "bmReqTyp");
824			opt->setup.bRequest = num_id(argv[n + 2], "bReq");
825			opt->setup.wValue = num_id(argv[n + 3], "wVal");
826			opt->setup.wIndex = num_id(argv[n + 4], "wIndex");
827			opt->setup.wLength = num_id(argv[n + 5], "wLen");
828			if (opt->setup.wLength != 0) {
829				opt->buffer = malloc(opt->setup.wLength);
830			} else {
831				opt->buffer = NULL;
832			}
833
834			n += 5;
835
836			if (!(opt->setup.bmRequestType &
837			    LIBUSB20_ENDPOINT_IN)) {
838				/* copy in data */
839				t = (argc - n - 1);
840				if (t < opt->setup.wLength) {
841					err(1, "request data missing");
842				}
843				t = opt->setup.wLength;
844				while (t--) {
845					((uint8_t *)opt->buffer)[t] =
846					    num_id(argv[n + t + 1], "req_data");
847				}
848				n += opt->setup.wLength;
849			}
850			opt->got_do_request = 1;
851			opt->got_any++;
852			break;
853		default:
854			if (n == 1) {
855				ptr = argv[n];
856
857				if ((ptr[0] == 'u') &&
858				    (ptr[1] == 'g') &&
859				    (ptr[2] == 'e') &&
860				    (ptr[3] == 'n'))
861					ptr += 4;
862
863				if ((sscanf(ptr, "%d.%d",
864				    &unit, &addr) != 2) ||
865				    (unit < 0) || (unit > 65535) ||
866				    (addr < 0) || (addr > 65535)) {
867					usage();
868					break;
869				}
870
871				opt->bus = unit;
872				opt->addr = addr;
873				opt->got_bus = 1;
874				opt->got_addr = 1;
875				break;
876			}
877			usage();
878			break;
879		}
880	}
881	if (opt->got_any) {
882		/* flush out last command */
883		flush_command(pbe, opt);
884	} else {
885		/* list all the devices */
886		opt->got_list = 1;
887		opt->got_any++;
888		flush_command(pbe, opt);
889	}
890	/* release data */
891	libusb20_be_free(pbe);
892
893	return (0);
894}
895