1/*- 2 * SPDX-License-Identifier: BSD-4-Clause 3 * 4 * Copyright (c) 1997, 1998, 1999 5 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Bill Paul. 18 * 4. Neither the name of the author nor the names of any co-contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 32 * THE POSSIBILITY OF SUCH DAMAGE. 33 * 34 * $FreeBSD$ 35 */ 36 37/* 38 * Register definitions for ADMtek Pegasus AN986 USB to Ethernet 39 * chip. The Pegasus uses a total of four USB endpoints: the control 40 * endpoint (0), a bulk read endpoint for receiving packets (1), 41 * a bulk write endpoint for sending packets (2) and an interrupt 42 * endpoint for passing RX and TX status (3). Endpoint 0 is used 43 * to read and write the ethernet module's registers. All registers 44 * are 8 bits wide. 45 * 46 * Packet transfer is done in 64 byte chunks. The last chunk in a 47 * transfer is denoted by having a length less that 64 bytes. For 48 * the RX case, the data includes an optional RX status word. 49 */ 50 51#define AUE_UR_READREG 0xF0 52#define AUE_UR_WRITEREG 0xF1 53 54#define AUE_CONFIG_INDEX 0 /* config number 1 */ 55#define AUE_IFACE_IDX 0 56 57/* 58 * Note that while the ADMtek technically has four endpoints, the control 59 * endpoint (endpoint 0) is regarded as special by the USB code and drivers 60 * don't have direct access to it (we access it using usbd_do_request() 61 * when reading/writing registers. Consequently, our endpoint indexes 62 * don't match those in the ADMtek Pegasus manual: we consider the RX data 63 * endpoint to be index 0 and work up from there. 64 */ 65enum { 66 AUE_BULK_DT_WR, 67 AUE_BULK_DT_RD, 68 AUE_INTR_DT_RD, 69 AUE_N_TRANSFER, 70}; 71 72#define AUE_INTR_PKTLEN 0x8 73 74#define AUE_CTL0 0x00 75#define AUE_CTL1 0x01 76#define AUE_CTL2 0x02 77#define AUE_MAR0 0x08 78#define AUE_MAR1 0x09 79#define AUE_MAR2 0x0A 80#define AUE_MAR3 0x0B 81#define AUE_MAR4 0x0C 82#define AUE_MAR5 0x0D 83#define AUE_MAR6 0x0E 84#define AUE_MAR7 0x0F 85#define AUE_MAR AUE_MAR0 86#define AUE_PAR0 0x10 87#define AUE_PAR1 0x11 88#define AUE_PAR2 0x12 89#define AUE_PAR3 0x13 90#define AUE_PAR4 0x14 91#define AUE_PAR5 0x15 92#define AUE_PAR AUE_PAR0 93#define AUE_PAUSE0 0x18 94#define AUE_PAUSE1 0x19 95#define AUE_PAUSE AUE_PAUSE0 96#define AUE_RX_FLOWCTL_CNT 0x1A 97#define AUE_RX_FLOWCTL_FIFO 0x1B 98#define AUE_REG_1D 0x1D 99#define AUE_EE_REG 0x20 100#define AUE_EE_DATA0 0x21 101#define AUE_EE_DATA1 0x22 102#define AUE_EE_DATA AUE_EE_DATA0 103#define AUE_EE_CTL 0x23 104#define AUE_PHY_ADDR 0x25 105#define AUE_PHY_DATA0 0x26 106#define AUE_PHY_DATA1 0x27 107#define AUE_PHY_DATA AUE_PHY_DATA0 108#define AUE_PHY_CTL 0x28 109#define AUE_USB_STS 0x2A 110#define AUE_TXSTAT0 0x2B 111#define AUE_TXSTAT1 0x2C 112#define AUE_TXSTAT AUE_TXSTAT0 113#define AUE_RXSTAT 0x2D 114#define AUE_PKTLOST0 0x2E 115#define AUE_PKTLOST1 0x2F 116#define AUE_PKTLOST AUE_PKTLOST0 117 118#define AUE_REG_7B 0x7B 119#define AUE_GPIO0 0x7E 120#define AUE_GPIO1 0x7F 121#define AUE_REG_81 0x81 122 123#define AUE_CTL0_INCLUDE_RXCRC 0x01 124#define AUE_CTL0_ALLMULTI 0x02 125#define AUE_CTL0_STOP_BACKOFF 0x04 126#define AUE_CTL0_RXSTAT_APPEND 0x08 127#define AUE_CTL0_WAKEON_ENB 0x10 128#define AUE_CTL0_RXPAUSE_ENB 0x20 129#define AUE_CTL0_RX_ENB 0x40 130#define AUE_CTL0_TX_ENB 0x80 131 132#define AUE_CTL1_HOMELAN 0x04 133#define AUE_CTL1_RESETMAC 0x08 134#define AUE_CTL1_SPEEDSEL 0x10 /* 0 = 10mbps, 1 = 100mbps */ 135#define AUE_CTL1_DUPLEX 0x20 /* 0 = half, 1 = full */ 136#define AUE_CTL1_DELAYHOME 0x40 137 138#define AUE_CTL2_EP3_CLR 0x01 /* reading EP3 clrs status regs */ 139#define AUE_CTL2_RX_BADFRAMES 0x02 140#define AUE_CTL2_RX_PROMISC 0x04 141#define AUE_CTL2_LOOPBACK 0x08 142#define AUE_CTL2_EEPROMWR_ENB 0x10 143#define AUE_CTL2_EEPROM_LOAD 0x20 144 145#define AUE_EECTL_WRITE 0x01 146#define AUE_EECTL_READ 0x02 147#define AUE_EECTL_DONE 0x04 148 149#define AUE_PHYCTL_PHYREG 0x1F 150#define AUE_PHYCTL_WRITE 0x20 151#define AUE_PHYCTL_READ 0x40 152#define AUE_PHYCTL_DONE 0x80 153 154#define AUE_USBSTS_SUSPEND 0x01 155#define AUE_USBSTS_RESUME 0x02 156 157#define AUE_TXSTAT0_JABTIMO 0x04 158#define AUE_TXSTAT0_CARLOSS 0x08 159#define AUE_TXSTAT0_NOCARRIER 0x10 160#define AUE_TXSTAT0_LATECOLL 0x20 161#define AUE_TXSTAT0_EXCESSCOLL 0x40 162#define AUE_TXSTAT0_UNDERRUN 0x80 163 164#define AUE_TXSTAT1_PKTCNT 0x0F 165#define AUE_TXSTAT1_FIFO_EMPTY 0x40 166#define AUE_TXSTAT1_FIFO_FULL 0x80 167 168#define AUE_RXSTAT_OVERRUN 0x01 169#define AUE_RXSTAT_PAUSE 0x02 170 171#define AUE_GPIO_IN0 0x01 172#define AUE_GPIO_OUT0 0x02 173#define AUE_GPIO_SEL0 0x04 174#define AUE_GPIO_IN1 0x08 175#define AUE_GPIO_OUT1 0x10 176#define AUE_GPIO_SEL1 0x20 177 178#define AUE_TIMEOUT 100 /* 10*ms */ 179#define AUE_MIN_FRAMELEN 60 180 181#define AUE_RXSTAT_MCAST 0x01 182#define AUE_RXSTAT_GIANT 0x02 183#define AUE_RXSTAT_RUNT 0x04 184#define AUE_RXSTAT_CRCERR 0x08 185#define AUE_RXSTAT_DRIBBLE 0x10 186#define AUE_RXSTAT_MASK 0x1E 187 188#define GET_MII(sc) uether_getmii(&(sc)->sc_ue) 189 190struct aue_intrpkt { 191 uint8_t aue_txstat0; 192 uint8_t aue_txstat1; 193 uint8_t aue_rxstat; 194 uint8_t aue_rxlostpkt0; 195 uint8_t aue_rxlostpkt1; 196 uint8_t aue_wakeupstat; 197 uint8_t aue_rsvd; 198} __packed; 199 200struct aue_rxpkt { 201 uint16_t aue_pktlen; 202 uint8_t aue_rxstat; 203 uint8_t pad; 204} __packed; 205 206struct aue_softc { 207 struct usb_ether sc_ue; 208 struct mtx sc_mtx; 209 struct usb_xfer *sc_xfer[AUE_N_TRANSFER]; 210 211 int sc_flags; 212#define AUE_FLAG_LSYS 0x0001 /* use Linksys reset */ 213#define AUE_FLAG_PNA 0x0002 /* has Home PNA */ 214#define AUE_FLAG_PII 0x0004 /* Pegasus II chip */ 215#define AUE_FLAG_LINK 0x0008 /* wait for link to come up */ 216#define AUE_FLAG_VER_2 0x0200 /* chip is version 2 */ 217#define AUE_FLAG_DUAL_PHY 0x0400 /* chip has two transcivers */ 218}; 219 220#define AUE_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx) 221#define AUE_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx) 222#define AUE_LOCK_ASSERT(_sc, t) mtx_assert(&(_sc)->sc_mtx, t) 223