1/*- 2 * SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0 3 * 4 * This file is provided under a dual BSD/GPLv2 license. When using or 5 * redistributing this file, you may do so under either license. 6 * 7 * GPL LICENSE SUMMARY 8 * 9 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of version 2 of the GNU General Public License as 13 * published by the Free Software Foundation. 14 * 15 * This program is distributed in the hope that it will be useful, but 16 * WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 18 * General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 23 * The full GNU General Public License is included in this distribution 24 * in the file called LICENSE.GPL. 25 * 26 * BSD LICENSE 27 * 28 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 29 * All rights reserved. 30 * 31 * Redistribution and use in source and binary forms, with or without 32 * modification, are permitted provided that the following conditions 33 * are met: 34 * 35 * * Redistributions of source code must retain the above copyright 36 * notice, this list of conditions and the following disclaimer. 37 * * Redistributions in binary form must reproduce the above copyright 38 * notice, this list of conditions and the following disclaimer in 39 * the documentation and/or other materials provided with the 40 * distribution. 41 * 42 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 43 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 44 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 45 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 46 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 47 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 48 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 49 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 50 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 51 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 52 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 53 * 54 * $FreeBSD$ 55 */ 56#ifndef _SCIC_SDS_PHY_REGISTERS_H_ 57#define _SCIC_SDS_PHY_REGISTERS_H_ 58 59/** 60 * @file 61 * 62 * @brief This file contains the macros used by the phy object to read/write 63 * to the SCU link layer registers. 64 */ 65 66#ifdef __cplusplus 67extern "C" { 68#endif // __cplusplus 69 70#include <dev/isci/scil/scic_sds_controller.h> 71 72//***************************************************************************** 73//* SCU LINK LAYER REGISTER OPERATIONS 74//***************************************************************************** 75 76/** 77 * Macro to read the transport layer register associated with this phy 78 * object. 79 */ 80#define scu_transport_layer_read(phy, reg) \ 81 scu_register_read( \ 82 scic_sds_phy_get_controller(phy), \ 83 (phy)->transport_layer_registers->reg \ 84 ) 85 86/** 87 * Macro to write the transport layer register associated with this phy 88 * object. 89 */ 90#define scu_transport_layer_write(phy, reg, value) \ 91 scu_register_write( \ 92 scic_sds_phy_get_controller(phy), \ 93 (phy)->transport_layer_registers->reg, \ 94 (value) \ 95 ) 96 97//**************************************************************************** 98//* Transport Layer registers controlled by the phy object 99//**************************************************************************** 100 101/** 102 * This macro reads the Transport layer control register 103 */ 104#define SCU_TLCR_READ(phy) \ 105 scu_transport_layer_read(phy, control) 106 107/** 108 * This macro writes the Transport layer control register 109 */ 110#define SCU_TLCR_WRITE(phy, value) \ 111 scu_transport_layer_write(phy, control, value) 112 113/** 114 * This macro reads the Transport layer address translation register 115 */ 116#define SCU_TLADTR_READ(phy) \ 117 scu_transport_layer_read(phy, address_translation) 118 119/** 120 * This macro writes the Transport layer address translation register 121 */ 122#define SCU_TLADTR_WRITE(phy) \ 123 scu_transport_layer_write(phy, address_translation, value) 124 125/** 126 * This macro writes the STP Transport Layer Direct Attached RNi register. 127 */ 128#define SCU_STPTLDARNI_WRITE(phy, index) \ 129 scu_transport_layer_write(phy, stp_rni, index) 130 131/** 132 * This macro reads the STP Transport Layer Direct Attached RNi register. 133 */ 134#define SCU_STPTLDARNI_READ(phy) \ 135 scu_transport_layer_read(phy, stp_rni) 136 137//***************************************************************************** 138//* SCU LINK LAYER REGISTER OPERATIONS 139//***************************************************************************** 140 141/** 142 * THis macro requests the SCU register write for the specified link layer 143 * register. 144 */ 145#define scu_link_layer_register_read(phy, reg) \ 146 scu_register_read( \ 147 scic_sds_phy_get_controller(phy), \ 148 (phy)->link_layer_registers->reg \ 149 ) 150 151/** 152 * This macro requests the SCU register read for the specified link layer 153 * register. 154 */ 155#define scu_link_layer_register_write(phy, reg, value) \ 156 scu_register_write( \ 157 scic_sds_phy_get_controller(phy), \ 158 (phy)->link_layer_registers->reg, \ 159 (value) \ 160 ) 161 162//***************************************************************************** 163//* SCU LINK LAYER REGISTERS 164//***************************************************************************** 165 166/// This macro reads from the SAS Identify Frame PHY Identifier register 167#define SCU_SAS_TIPID_READ(phy) \ 168 scu_link_layer_register_read(phy, identify_frame_phy_id) 169 170/// This macro writes to the SAS Identify Frame PHY Identifier register 171#define SCU_SAS_TIPID_WRITE(phy, value) \ 172 scu_link_layer_register_write(phy, identify_frame_phy_id, value) 173 174/// This macro reads from the SAS Identification register 175#define SCU_SAS_TIID_READ(phy) \ 176 scu_link_layer_register_read(phy, transmit_identification) 177 178/// This macro writes to the SAS Identification register 179#define SCU_SAS_TIID_WRITE(phy, value) \ 180 scu_link_layer_register_write(phy, transmit_identification, value) 181 182/// This macro reads the SAS Device Name High register 183#define SCU_SAS_TIDNH_READ(phy) \ 184 scu_link_layer_register_read(phy, sas_device_name_high) 185 186/// This macro writes the SAS Device Name High register 187#define SCU_SAS_TIDNH_WRITE(phy, value) \ 188 scu_link_layer_register_write(phy, sas_device_name_high, value) 189 190/// This macro reads the SAS Device Name Low register 191#define SCU_SAS_TIDNL_READ(phy) \ 192 scu_link_layer_register_read(phy, sas_device_name_low) 193 194/// This macro writes the SAS Device Name Low register 195#define SCU_SAS_TIDNL_WRITE(phy, value) \ 196 scu_link_layer_register_write(phy, sas_device_name_low, value) 197 198/// This macro reads the Source SAS Address High register 199#define SCU_SAS_TISSAH_READ(phy) \ 200 scu_link_layer_register_read(phy, source_sas_address_high) 201 202/// This macro writes the Source SAS Address High register 203#define SCU_SAS_TISSAH_WRITE(phy, value) \ 204 scu_link_layer_register_write(phy, source_sas_address_high, value) 205 206/// This macro reads the Source SAS Address Low register 207#define SCU_SAS_TISSAL_READ(phy) \ 208 scu_link_layer_register_read(phy, source_sas_address_low) 209 210/// This macro writes the Source SAS Address Low register 211#define SCU_SAS_TISSAL_WRITE(phy, value) \ 212 scu_link_layer_register_write(phy, source_sas_address_low, value) 213 214/// This macro reads the PHY Configuration register 215#define SCU_SAS_PCFG_READ(phy) \ 216 scu_link_layer_register_read(phy, phy_configuration); 217 218/// This macro writes the PHY Configuration register 219#define SCU_SAS_PCFG_WRITE(phy, value) \ 220 scu_link_layer_register_write(phy, phy_configuration, value) 221 222/// This macro reads the PHY Enable Spinup register 223#define SCU_SAS_ENSPINUP_READ(phy) \ 224 scu_link_layer_register_read(phy, notify_enable_spinup_control) 225 226/// This macro writes the PHY Enable Spinup register 227#define SCU_SAS_ENSPINUP_WRITE(phy, value) \ 228 scu_link_layer_register_write(phy, notify_enable_spinup_control, value) 229 230/// This macro reads the CLKSM register 231#define SCU_SAS_CLKSM_READ(phy) \ 232 scu_link_layer_register_read(phy, clock_skew_management) 233 234/// This macro writes the CLKSM register 235#define SCU_SAS_CLKSM_WRITE(phy, value) \ 236 scu_link_layer_register_write(phy, clock_skew_management, value) 237 238/// This macro reads the PHY Capacity register 239#define SCU_SAS_PHYCAP_READ(phy) \ 240 scu_link_layer_register_read(phy, phy_capabilities) 241 242/// This macro writes the PHY Capacity register 243#define SCU_SAS_PHYCAP_WRITE(phy, value) \ 244 scu_link_layer_register_write(phy, phy_capabilities, value) 245 246/// This macro reads the Received PHY Capacity register 247#define SCU_SAS_RECPHYCAP_READ(phy) \ 248 scu_link_layer_register_read(phy, receive_phycap) 249 250/// This macro reads the link layer control register 251#define SCU_SAS_LLCTL_READ(phy) \ 252 scu_link_layer_register_read(phy, link_layer_control); 253 254/// This macro writes the link layer control register 255#define SCU_SAS_LLCTL_WRITE(phy, value) \ 256 scu_link_layer_register_write(phy, link_layer_control, value); 257 258/// This macro reads the link layer status register 259#define SCU_SAS_LLSTA_READ(phy) \ 260 scu_link_layer_register_read(phy, link_layer_status); 261 262#define SCU_SAS_ECENCR_READ(phy) \ 263 scu_link_layer_register_read(phy, error_counter_event_notification_control) 264 265#define SCU_SAS_ECENCR_WRITE(phy, value) \ 266 scu_link_layer_register_write(phy, error_counter_event_notification_control, value) 267 268#ifdef __cplusplus 269} 270#endif // __cplusplus 271 272#endif // _SCIC_SDS_PHY_REGISTERS_H_ 273