1/*- 2 * Copyright (c) 2014 Ruslan Bukin <br@bsdpad.com> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27/* 28 * Vybrid Family Serial Peripheral Interface (SPI) 29 * Chapter 47, Vybrid Reference Manual, Rev. 5, 07/2013 30 */ 31 32#include <sys/cdefs.h> 33__FBSDID("$FreeBSD$"); 34 35#include <sys/param.h> 36#include <sys/systm.h> 37#include <sys/bus.h> 38#include <sys/kernel.h> 39#include <sys/module.h> 40#include <sys/malloc.h> 41#include <sys/rman.h> 42#include <sys/timeet.h> 43#include <sys/timetc.h> 44#include <sys/watchdog.h> 45 46#include <dev/spibus/spi.h> 47#include <dev/spibus/spibusvar.h> 48 49#include "spibus_if.h" 50 51#include <dev/ofw/openfirm.h> 52#include <dev/ofw/ofw_bus.h> 53#include <dev/ofw/ofw_bus_subr.h> 54 55#include <machine/bus.h> 56#include <machine/cpu.h> 57#include <machine/intr.h> 58 59#include <arm/freescale/vybrid/vf_common.h> 60 61#define SPI_FIFO_SIZE 4 62 63#define SPI_MCR 0x00 /* Module Configuration */ 64#define MCR_MSTR (1 << 31) /* Master/Slave Mode Select */ 65#define MCR_CONT_SCKE (1 << 30) /* Continuous SCK Enable */ 66#define MCR_FRZ (1 << 27) /* Freeze */ 67#define MCR_PCSIS_S 16 /* Peripheral Chip Select */ 68#define MCR_PCSIS_M 0x3f 69#define MCR_MDIS (1 << 14) /* Module Disable */ 70#define MCR_CLR_TXF (1 << 11) /* Clear TX FIFO */ 71#define MCR_CLR_RXF (1 << 10) /* Clear RX FIFO */ 72#define MCR_HALT (1 << 0) /* Starts and stops SPI transfers */ 73#define SPI_TCR 0x08 /* Transfer Count */ 74#define SPI_CTAR0 0x0C /* Clock and Transfer Attributes */ 75#define SPI_CTAR0_SLAVE 0x0C /* Clock and Transfer Attributes */ 76#define SPI_CTAR1 0x10 /* Clock and Transfer Attributes */ 77#define SPI_CTAR2 0x14 /* Clock and Transfer Attributes */ 78#define SPI_CTAR3 0x18 /* Clock and Transfer Attributes */ 79#define CTAR_FMSZ_M 0xf 80#define CTAR_FMSZ_S 27 /* Frame Size */ 81#define CTAR_FMSZ_8 0x7 /* 8 bits */ 82#define CTAR_CPOL (1 << 26) /* Clock Polarity */ 83#define CTAR_CPHA (1 << 25) /* Clock Phase */ 84#define CTAR_LSBFE (1 << 24) /* Less significant bit first */ 85#define CTAR_PCSSCK_M 0x3 86#define CTAR_PCSSCK_S 22 /* PCS to SCK Delay Prescaler */ 87#define CTAR_PBR_M 0x3 88#define CTAR_PBR_S 16 /* Baud Rate Prescaler */ 89#define CTAR_PBR_7 0x3 /* Divide by 7 */ 90#define CTAR_CSSCK_M 0xf 91#define CTAR_CSSCK_S 12 /* PCS to SCK Delay Scaler */ 92#define CTAR_BR_M 0xf 93#define CTAR_BR_S 0 /* Baud Rate Scaler */ 94#define SPI_SR 0x2C /* Status Register */ 95#define SR_TCF (1 << 31) /* Transfer Complete Flag */ 96#define SR_EOQF (1 << 28) /* End of Queue Flag */ 97#define SR_TFFF (1 << 25) /* Transmit FIFO Fill Flag */ 98#define SR_RFDF (1 << 17) /* Receive FIFO Drain Flag */ 99#define SPI_RSER 0x30 /* DMA/Interrupt Select */ 100#define RSER_EOQF_RE (1 << 28) /* Finished Request Enable */ 101#define SPI_PUSHR 0x34 /* PUSH TX FIFO In Master Mode */ 102#define PUSHR_CONT (1 << 31) /* Continuous Peripheral CS */ 103#define PUSHR_EOQ (1 << 27) /* End Of Queue */ 104#define PUSHR_CTCNT (1 << 26) /* Clear Transfer Counter */ 105#define PUSHR_PCS_M 0x3f 106#define PUSHR_PCS_S 16 /* Select PCS signals */ 107 108#define SPI_PUSHR_SLAVE 0x34 /* PUSH TX FIFO Register In Slave Mode */ 109#define SPI_POPR 0x38 /* POP RX FIFO Register */ 110#define SPI_TXFR0 0x3C /* Transmit FIFO Registers */ 111#define SPI_TXFR1 0x40 112#define SPI_TXFR2 0x44 113#define SPI_TXFR3 0x48 114#define SPI_RXFR0 0x7C /* Receive FIFO Registers */ 115#define SPI_RXFR1 0x80 116#define SPI_RXFR2 0x84 117#define SPI_RXFR3 0x88 118 119struct spi_softc { 120 struct resource *res[2]; 121 bus_space_tag_t bst; 122 bus_space_handle_t bsh; 123 void *ih; 124}; 125 126static struct resource_spec spi_spec[] = { 127 { SYS_RES_MEMORY, 0, RF_ACTIVE }, 128 { SYS_RES_IRQ, 0, RF_ACTIVE }, 129 { -1, 0 } 130}; 131 132static int 133spi_probe(device_t dev) 134{ 135 136 if (!ofw_bus_status_okay(dev)) 137 return (ENXIO); 138 139 if (!ofw_bus_is_compatible(dev, "fsl,mvf600-spi")) 140 return (ENXIO); 141 142 device_set_desc(dev, "Vybrid Family Serial Peripheral Interface"); 143 return (BUS_PROBE_DEFAULT); 144} 145 146static int 147spi_attach(device_t dev) 148{ 149 struct spi_softc *sc; 150 uint32_t reg; 151 152 sc = device_get_softc(dev); 153 154 if (bus_alloc_resources(dev, spi_spec, sc->res)) { 155 device_printf(dev, "could not allocate resources\n"); 156 return (ENXIO); 157 } 158 159 /* Memory interface */ 160 sc->bst = rman_get_bustag(sc->res[0]); 161 sc->bsh = rman_get_bushandle(sc->res[0]); 162 163 reg = READ4(sc, SPI_MCR); 164 reg |= MCR_MSTR; 165 reg &= ~(MCR_CONT_SCKE | MCR_MDIS | MCR_FRZ); 166 reg &= ~(MCR_PCSIS_M << MCR_PCSIS_S); 167 reg |= (MCR_PCSIS_M << MCR_PCSIS_S); /* PCS Active low */ 168 reg |= (MCR_CLR_TXF | MCR_CLR_RXF); 169 WRITE4(sc, SPI_MCR, reg); 170 171 reg = READ4(sc, SPI_RSER); 172 reg |= RSER_EOQF_RE; 173 WRITE4(sc, SPI_RSER, reg); 174 175 reg = READ4(sc, SPI_MCR); 176 reg &= ~MCR_HALT; 177 WRITE4(sc, SPI_MCR, reg); 178 179 reg = READ4(sc, SPI_CTAR0); 180 reg &= ~(CTAR_FMSZ_M << CTAR_FMSZ_S); 181 reg |= (CTAR_FMSZ_8 << CTAR_FMSZ_S); 182 /* 183 * TODO: calculate BR 184 * SCK baud rate = ( fsys / PBR ) * (1 + DBR) / BR 185 * 186 * reg &= ~(CTAR_BR_M << CTAR_BR_S); 187 */ 188 reg &= ~CTAR_CPOL; /* Polarity */ 189 reg |= CTAR_CPHA; 190 /* 191 * Set LSB (Less significant bit first) 192 * must be used for some applications, e.g. some LCDs 193 */ 194 reg |= CTAR_LSBFE; 195 WRITE4(sc, SPI_CTAR0, reg); 196 197 reg = READ4(sc, SPI_CTAR0); 198 reg &= ~(CTAR_PBR_M << CTAR_PBR_S); 199 reg |= (CTAR_PBR_7 << CTAR_PBR_S); 200 WRITE4(sc, SPI_CTAR0, reg); 201 202 device_add_child(dev, "spibus", 0); 203 return (bus_generic_attach(dev)); 204} 205 206static int 207spi_txrx(struct spi_softc *sc, uint8_t *out_buf, 208 uint8_t *in_buf, int bufsz, int cs) 209{ 210 uint32_t reg, wreg; 211 uint32_t txcnt; 212 uint32_t i; 213 214 txcnt = 0; 215 216 for (i = 0; i < bufsz; i++) { 217 txcnt++; 218 wreg = out_buf[i]; 219 wreg |= PUSHR_CONT; 220 wreg |= (cs << PUSHR_PCS_S); 221 if (i == 0) 222 wreg |= PUSHR_CTCNT; 223 if (i == (bufsz - 1) || txcnt == SPI_FIFO_SIZE) 224 wreg |= PUSHR_EOQ; 225 WRITE4(sc, SPI_PUSHR, wreg); 226 227 if (i == (bufsz - 1) || txcnt == SPI_FIFO_SIZE) { 228 txcnt = 0; 229 230 /* Wait last entry in a queue to be transmitted */ 231 while((READ4(sc, SPI_SR) & SR_EOQF) == 0) 232 continue; 233 234 reg = READ4(sc, SPI_SR); 235 reg |= (SR_TCF | SR_EOQF); 236 WRITE4(sc, SPI_SR, reg); 237 } 238 239 /* Wait until RX FIFO is empty */ 240 while((READ4(sc, SPI_SR) & SR_RFDF) == 0) 241 continue; 242 243 in_buf[i] = READ1(sc, SPI_POPR); 244 } 245 246 return (0); 247} 248 249static int 250spi_transfer(device_t dev, device_t child, struct spi_command *cmd) 251{ 252 struct spi_softc *sc; 253 uint32_t cs; 254 255 sc = device_get_softc(dev); 256 257 KASSERT(cmd->tx_cmd_sz == cmd->rx_cmd_sz, 258 ("%s: TX/RX command sizes should be equal", __func__)); 259 KASSERT(cmd->tx_data_sz == cmd->rx_data_sz, 260 ("%s: TX/RX data sizes should be equal", __func__)); 261 262 /* get the proper chip select */ 263 spibus_get_cs(child, &cs); 264 265 cs &= ~SPIBUS_CS_HIGH; 266 267 /* Command */ 268 spi_txrx(sc, cmd->tx_cmd, cmd->rx_cmd, cmd->tx_cmd_sz, cs); 269 270 /* Data */ 271 spi_txrx(sc, cmd->tx_data, cmd->rx_data, cmd->tx_data_sz, cs); 272 273 return (0); 274} 275 276static device_method_t spi_methods[] = { 277 /* Device interface */ 278 DEVMETHOD(device_probe, spi_probe), 279 DEVMETHOD(device_attach, spi_attach), 280 /* SPI interface */ 281 DEVMETHOD(spibus_transfer, spi_transfer), 282 { 0, 0 } 283}; 284 285static driver_t spi_driver = { 286 "spi", 287 spi_methods, 288 sizeof(struct spi_softc), 289}; 290 291static devclass_t spi_devclass; 292 293DRIVER_MODULE(spi, simplebus, spi_driver, spi_devclass, 0, 0); 294