spr.h revision 194678
1/*- 2 * Copyright (c) 2001 The NetBSD Foundation, Inc. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by the NetBSD 16 * Foundation, Inc. and its contributors. 17 * 4. Neither the name of The NetBSD Foundation nor the names of its 18 * contributors may be used to endorse or promote products derived 19 * from this software without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 22 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 23 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 24 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 25 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 31 * POSSIBILITY OF SUCH DAMAGE. 32 * 33 * $NetBSD: spr.h,v 1.25 2002/08/14 15:38:40 matt Exp $ 34 * $FreeBSD: head/sys/powerpc/include/spr.h 194678 2009-06-23 04:02:36Z nwhitehorn $ 35 */ 36#ifndef _POWERPC_SPR_H_ 37#define _POWERPC_SPR_H_ 38 39#ifndef _LOCORE 40#define mtspr(reg, val) \ 41 __asm __volatile("mtspr %0,%1" : : "K"(reg), "r"(val)) 42#define mfspr(reg) \ 43 ( { register_t val; \ 44 __asm __volatile("mfspr %0,%1" : "=r"(val) : "K"(reg)); \ 45 val; } ) 46 47/* The following routines allow manipulation of the full 64-bit width 48 * of SPRs on 64 bit CPUs in bridge mode */ 49 50#define mtspr64(reg,valhi,vallo,scratch) \ 51 __asm __volatile(" \ 52 mfmsr %0; \ 53 insrdi %0,1,1,0; \ 54 mtmsrd %0; \ 55 isync; \ 56 \ 57 sld %1,%1,%4; \ 58 or %1,%1,%2; \ 59 mtspr %3,%1; \ 60 srd %1,%1,%4; \ 61 \ 62 clrldi %0,%0,1; \ 63 mtmsrd %0; \ 64 isync;" \ 65 : "=r"(scratch), "=r"(valhi) : "r"(vallo), "K"(reg), "r"(32)) 66 67#define mfspr64upper(reg,scratch) \ 68 ( { register_t val; \ 69 __asm __volatile(" \ 70 mfmsr %0; \ 71 insrdi %0,1,1,0; \ 72 mtmsrd %0; \ 73 isync; \ 74 \ 75 mfspr %1,%2; \ 76 srd %1,%1,%3; \ 77 \ 78 clrldi %0,%0,1; \ 79 mtmsrd %0; \ 80 isync;" \ 81 : "=r"(scratch), "=r"(val) : "K"(reg), "r"(32)); \ 82 val; } ) 83 84#endif /* _LOCORE */ 85 86/* 87 * Special Purpose Register declarations. 88 * 89 * The first column in the comments indicates which PowerPC 90 * architectures the SPR is valid on - 4 for 4xx series, 91 * 6 for 6xx/7xx series and 8 for 8xx and 8xxx series. 92 */ 93 94#define SPR_MQ 0x000 /* .6. 601 MQ register */ 95#define SPR_XER 0x001 /* 468 Fixed Point Exception Register */ 96#define SPR_RTCU_R 0x004 /* .6. 601 RTC Upper - Read */ 97#define SPR_RTCL_R 0x005 /* .6. 601 RTC Lower - Read */ 98#define SPR_LR 0x008 /* 468 Link Register */ 99#define SPR_CTR 0x009 /* 468 Count Register */ 100#define SPR_DSISR 0x012 /* .68 DSI exception source */ 101#define DSISR_DIRECT 0x80000000 /* Direct-store error exception */ 102#define DSISR_NOTFOUND 0x40000000 /* Translation not found */ 103#define DSISR_PROTECT 0x08000000 /* Memory access not permitted */ 104#define DSISR_INVRX 0x04000000 /* Reserve-indexed insn direct-store access */ 105#define DSISR_STORE 0x02000000 /* Store operation */ 106#define DSISR_DABR 0x00400000 /* DABR match */ 107#define DSISR_SEGMENT 0x00200000 /* XXX; not in 6xx PEM */ 108#define DSISR_EAR 0x00100000 /* eciwx/ecowx && EAR[E] == 0 */ 109#define SPR_DAR 0x013 /* .68 Data Address Register */ 110#define SPR_RTCU_W 0x014 /* .6. 601 RTC Upper - Write */ 111#define SPR_RTCL_W 0x015 /* .6. 601 RTC Lower - Write */ 112#define SPR_DEC 0x016 /* .68 DECrementer register */ 113#define SPR_SDR1 0x019 /* .68 Page table base address register */ 114#define SPR_SRR0 0x01a /* 468 Save/Restore Register 0 */ 115#define SPR_SRR1 0x01b /* 468 Save/Restore Register 1 */ 116#define SPR_DECAR 0x036 /* ..8 Decrementer auto reload */ 117#define SPR_EIE 0x050 /* ..8 Exception Interrupt ??? */ 118#define SPR_EID 0x051 /* ..8 Exception Interrupt ??? */ 119#define SPR_NRI 0x052 /* ..8 Exception Interrupt ??? */ 120#define SPR_USPRG0 0x100 /* 4.. User SPR General 0 */ 121#define SPR_VRSAVE 0x100 /* .6. AltiVec VRSAVE */ 122#define SPR_SPRG0 0x110 /* 468 SPR General 0 */ 123#define SPR_SPRG1 0x111 /* 468 SPR General 1 */ 124#define SPR_SPRG2 0x112 /* 468 SPR General 2 */ 125#define SPR_SPRG3 0x113 /* 468 SPR General 3 */ 126#define SPR_SPRG4 0x114 /* 4.. SPR General 4 */ 127#define SPR_SPRG5 0x115 /* 4.. SPR General 5 */ 128#define SPR_SPRG6 0x116 /* 4.. SPR General 6 */ 129#define SPR_SPRG7 0x117 /* 4.. SPR General 7 */ 130#define SPR_SCOMC 0x114 /* ... SCOM Address Register (970) */ 131#define SPR_SCOMD 0x115 /* ... SCOM Data Register (970) */ 132#define SPR_ASR 0x118 /* ... Address Space Register (PPC64) */ 133#define SPR_EAR 0x11a /* .68 External Access Register */ 134#define SPR_PVR 0x11f /* 468 Processor Version Register */ 135#define MPC601 0x0001 136#define MPC603 0x0003 137#define MPC604 0x0004 138#define MPC602 0x0005 139#define MPC603e 0x0006 140#define MPC603ev 0x0007 141#define MPC750 0x0008 142#define MPC604ev 0x0009 143#define MPC7400 0x000c 144#define MPC620 0x0014 145#define IBM403 0x0020 146#define IBM401A1 0x0021 147#define IBM401B2 0x0022 148#define IBM401C2 0x0023 149#define IBM401D2 0x0024 150#define IBM401E2 0x0025 151#define IBM401F2 0x0026 152#define IBM401G2 0x0027 153#define IBM970 0x0039 154#define IBM970FX 0x003c 155#define IBMPOWER3 0x0041 156#define IBM970MP 0x0044 157#define IBM970GX 0x0045 158#define MPC860 0x0050 159#define MPC8240 0x0081 160#define IBM405GP 0x4011 161#define IBM405L 0x4161 162#define IBM750FX 0x7000 163#define MPC745X_P(v) ((v & 0xFFF8) == 0x8000) 164#define MPC7450 0x8000 165#define MPC7455 0x8001 166#define MPC7457 0x8002 167#define MPC7447A 0x8003 168#define MPC7448 0x8004 169#define MPC7410 0x800c 170#define MPC8245 0x8081 171#define FSL_E500v1 0x8020 172#define FSL_E500v2 0x8021 173 174#define SPR_IBAT0U 0x210 /* .68 Instruction BAT Reg 0 Upper */ 175#define SPR_IBAT0U 0x210 /* .6. Instruction BAT Reg 0 Upper */ 176#define SPR_IBAT0L 0x211 /* .6. Instruction BAT Reg 0 Lower */ 177#define SPR_IBAT1U 0x212 /* .6. Instruction BAT Reg 1 Upper */ 178#define SPR_IBAT1L 0x213 /* .6. Instruction BAT Reg 1 Lower */ 179#define SPR_IBAT2U 0x214 /* .6. Instruction BAT Reg 2 Upper */ 180#define SPR_IBAT2L 0x215 /* .6. Instruction BAT Reg 2 Lower */ 181#define SPR_IBAT3U 0x216 /* .6. Instruction BAT Reg 3 Upper */ 182#define SPR_IBAT3L 0x217 /* .6. Instruction BAT Reg 3 Lower */ 183#define SPR_DBAT0U 0x218 /* .6. Data BAT Reg 0 Upper */ 184#define SPR_DBAT0L 0x219 /* .6. Data BAT Reg 0 Lower */ 185#define SPR_DBAT1U 0x21a /* .6. Data BAT Reg 1 Upper */ 186#define SPR_DBAT1L 0x21b /* .6. Data BAT Reg 1 Lower */ 187#define SPR_DBAT2U 0x21c /* .6. Data BAT Reg 2 Upper */ 188#define SPR_DBAT2L 0x21d /* .6. Data BAT Reg 2 Lower */ 189#define SPR_DBAT3U 0x21e /* .6. Data BAT Reg 3 Upper */ 190#define SPR_DBAT3L 0x21f /* .6. Data BAT Reg 3 Lower */ 191#define SPR_IC_CST 0x230 /* ..8 Instruction Cache CSR */ 192#define IC_CST_IEN 0x80000000 /* I cache is ENabled (RO) */ 193#define IC_CST_CMD_INVALL 0x0c000000 /* I cache invalidate all */ 194#define IC_CST_CMD_UNLOCKALL 0x0a000000 /* I cache unlock all */ 195#define IC_CST_CMD_UNLOCK 0x08000000 /* I cache unlock block */ 196#define IC_CST_CMD_LOADLOCK 0x06000000 /* I cache load & lock block */ 197#define IC_CST_CMD_DISABLE 0x04000000 /* I cache disable */ 198#define IC_CST_CMD_ENABLE 0x02000000 /* I cache enable */ 199#define IC_CST_CCER1 0x00200000 /* I cache error type 1 (RO) */ 200#define IC_CST_CCER2 0x00100000 /* I cache error type 2 (RO) */ 201#define IC_CST_CCER3 0x00080000 /* I cache error type 3 (RO) */ 202#define SPR_IBAT4U 0x230 /* .6. Instruction BAT Reg 4 Upper */ 203#define SPR_IC_ADR 0x231 /* ..8 Instruction Cache Address */ 204#define SPR_IBAT4L 0x231 /* .6. Instruction BAT Reg 4 Lower */ 205#define SPR_IC_DAT 0x232 /* ..8 Instruction Cache Data */ 206#define SPR_IBAT5U 0x232 /* .6. Instruction BAT Reg 5 Upper */ 207#define SPR_IBAT5L 0x233 /* .6. Instruction BAT Reg 5 Lower */ 208#define SPR_IBAT6U 0x234 /* .6. Instruction BAT Reg 6 Upper */ 209#define SPR_IBAT6L 0x235 /* .6. Instruction BAT Reg 6 Lower */ 210#define SPR_IBAT7U 0x236 /* .6. Instruction BAT Reg 7 Upper */ 211#define SPR_IBAT7L 0x237 /* .6. Instruction BAT Reg 7 Lower */ 212#define SPR_DC_CST 0x230 /* ..8 Data Cache CSR */ 213#define DC_CST_DEN 0x80000000 /* D cache ENabled (RO) */ 214#define DC_CST_DFWT 0x40000000 /* D cache Force Write-Thru (RO) */ 215#define DC_CST_LES 0x20000000 /* D cache Little Endian Swap (RO) */ 216#define DC_CST_CMD_FLUSH 0x0e000000 /* D cache invalidate all */ 217#define DC_CST_CMD_INVALL 0x0c000000 /* D cache invalidate all */ 218#define DC_CST_CMD_UNLOCKALL 0x0a000000 /* D cache unlock all */ 219#define DC_CST_CMD_UNLOCK 0x08000000 /* D cache unlock block */ 220#define DC_CST_CMD_CLRLESWAP 0x07000000 /* D cache clr little-endian swap */ 221#define DC_CST_CMD_LOADLOCK 0x06000000 /* D cache load & lock block */ 222#define DC_CST_CMD_SETLESWAP 0x05000000 /* D cache set little-endian swap */ 223#define DC_CST_CMD_DISABLE 0x04000000 /* D cache disable */ 224#define DC_CST_CMD_CLRFWT 0x03000000 /* D cache clear forced write-thru */ 225#define DC_CST_CMD_ENABLE 0x02000000 /* D cache enable */ 226#define DC_CST_CMD_SETFWT 0x01000000 /* D cache set forced write-thru */ 227#define DC_CST_CCER1 0x00200000 /* D cache error type 1 (RO) */ 228#define DC_CST_CCER2 0x00100000 /* D cache error type 2 (RO) */ 229#define DC_CST_CCER3 0x00080000 /* D cache error type 3 (RO) */ 230#define SPR_DBAT4U 0x238 /* .6. Data BAT Reg 4 Upper */ 231#define SPR_DC_ADR 0x231 /* ..8 Data Cache Address */ 232#define SPR_DBAT4L 0x239 /* .6. Data BAT Reg 4 Lower */ 233#define SPR_DC_DAT 0x232 /* ..8 Data Cache Data */ 234#define SPR_DBAT5U 0x23a /* .6. Data BAT Reg 5 Upper */ 235#define SPR_DBAT5L 0x23b /* .6. Data BAT Reg 5 Lower */ 236#define SPR_DBAT6U 0x23c /* .6. Data BAT Reg 6 Upper */ 237#define SPR_DBAT6L 0x23d /* .6. Data BAT Reg 6 Lower */ 238#define SPR_DBAT7U 0x23e /* .6. Data BAT Reg 7 Upper */ 239#define SPR_DBAT7L 0x23f /* .6. Data BAT Reg 7 Lower */ 240#define SPR_MI_CTR 0x310 /* ..8 IMMU control */ 241#define Mx_CTR_GPM 0x80000000 /* Group Protection Mode */ 242#define Mx_CTR_PPM 0x40000000 /* Page Protection Mode */ 243#define Mx_CTR_CIDEF 0x20000000 /* Cache-Inhibit DEFault */ 244#define MD_CTR_WTDEF 0x20000000 /* Write-Through DEFault */ 245#define Mx_CTR_RSV4 0x08000000 /* Reserve 4 TLB entries */ 246#define MD_CTR_TWAM 0x04000000 /* TableWalk Assist Mode */ 247#define Mx_CTR_PPCS 0x02000000 /* Priv/user state compare mode */ 248#define Mx_CTR_TLB_INDX 0x000001f0 /* TLB index mask */ 249#define Mx_CTR_TLB_INDX_BITPOS 8 /* TLB index shift */ 250#define SPR_MI_AP 0x312 /* ..8 IMMU access protection */ 251#define Mx_GP_SUPER(n) (0 << (2*(15-(n)))) /* access is supervisor */ 252#define Mx_GP_PAGE (1 << (2*(15-(n)))) /* access is page protect */ 253#define Mx_GP_SWAPPED (2 << (2*(15-(n)))) /* access is swapped */ 254#define Mx_GP_USER (3 << (2*(15-(n)))) /* access is user */ 255#define SPR_MI_EPN 0x313 /* ..8 IMMU effective number */ 256#define Mx_EPN_EPN 0xfffff000 /* Effective Page Number mask */ 257#define Mx_EPN_EV 0x00000020 /* Entry Valid */ 258#define Mx_EPN_ASID 0x0000000f /* Address Space ID */ 259#define SPR_MI_TWC 0x315 /* ..8 IMMU tablewalk control */ 260#define MD_TWC_L2TB 0xfffff000 /* Level-2 Tablewalk Base */ 261#define Mx_TWC_APG 0x000001e0 /* Access Protection Group */ 262#define Mx_TWC_G 0x00000010 /* Guarded memory */ 263#define Mx_TWC_PS 0x0000000c /* Page Size (L1) */ 264#define MD_TWC_WT 0x00000002 /* Write-Through */ 265#define Mx_TWC_V 0x00000001 /* Entry Valid */ 266#define SPR_MI_RPN 0x316 /* ..8 IMMU real (phys) page number */ 267#define Mx_RPN_RPN 0xfffff000 /* Real Page Number */ 268#define Mx_RPN_PP 0x00000ff0 /* Page Protection */ 269#define Mx_RPN_SPS 0x00000008 /* Small Page Size */ 270#define Mx_RPN_SH 0x00000004 /* SHared page */ 271#define Mx_RPN_CI 0x00000002 /* Cache Inhibit */ 272#define Mx_RPN_V 0x00000001 /* Valid */ 273#define SPR_MD_CTR 0x318 /* ..8 DMMU control */ 274#define SPR_M_CASID 0x319 /* ..8 CASID */ 275#define M_CASID 0x0000000f /* Current AS Id */ 276#define SPR_MD_AP 0x31a /* ..8 DMMU access protection */ 277#define SPR_MD_EPN 0x31b /* ..8 DMMU effective number */ 278#define SPR_M_TWB 0x31c /* ..8 MMU tablewalk base */ 279#define M_TWB_L1TB 0xfffff000 /* level-1 translation base */ 280#define M_TWB_L1INDX 0x00000ffc /* level-1 index */ 281#define SPR_MD_TWC 0x31d /* ..8 DMMU tablewalk control */ 282#define SPR_MD_RPN 0x31e /* ..8 DMMU real (phys) page number */ 283#define SPR_MD_TW 0x31f /* ..8 MMU tablewalk scratch */ 284#define SPR_MI_CAM 0x330 /* ..8 IMMU CAM entry read */ 285#define SPR_MI_RAM0 0x331 /* ..8 IMMU RAM entry read reg 0 */ 286#define SPR_MI_RAM1 0x332 /* ..8 IMMU RAM entry read reg 1 */ 287#define SPR_MD_CAM 0x338 /* ..8 IMMU CAM entry read */ 288#define SPR_MD_RAM0 0x339 /* ..8 IMMU RAM entry read reg 0 */ 289#define SPR_MD_RAM1 0x33a /* ..8 IMMU RAM entry read reg 1 */ 290#define SPR_UMMCR2 0x3a0 /* .6. User Monitor Mode Control Register 2 */ 291#define SPR_UMMCR0 0x3a8 /* .6. User Monitor Mode Control Register 0 */ 292#define SPR_USIA 0x3ab /* .6. User Sampled Instruction Address */ 293#define SPR_UMMCR1 0x3ac /* .6. User Monitor Mode Control Register 1 */ 294#define SPR_ZPR 0x3b0 /* 4.. Zone Protection Register */ 295#define SPR_MMCR2 0x3b0 /* .6. Monitor Mode Control Register 2 */ 296#define SPR_MMCR2_THRESHMULT_32 0x80000000 /* Multiply MMCR0 threshold by 32 */ 297#define SPR_MMCR2_THRESHMULT_2 0x00000000 /* Multiply MMCR0 threshold by 2 */ 298#define SPR_PID 0x3b1 /* 4.. Process ID */ 299#define SPR_PMC5 0x3b1 /* .6. Performance Counter Register 5 */ 300#define SPR_PMC6 0x3b2 /* .6. Performance Counter Register 6 */ 301#define SPR_CCR0 0x3b3 /* 4.. Core Configuration Register 0 */ 302#define SPR_IAC3 0x3b4 /* 4.. Instruction Address Compare 3 */ 303#define SPR_IAC4 0x3b5 /* 4.. Instruction Address Compare 4 */ 304#define SPR_DVC1 0x3b6 /* 4.. Data Value Compare 1 */ 305#define SPR_DVC2 0x3b7 /* 4.. Data Value Compare 2 */ 306#define SPR_MMCR0 0x3b8 /* .6. Monitor Mode Control Register 0 */ 307 308#define SPR_970MMCR0 0x31b /* ... Monitor Mode Control Register 0 (PPC 970) */ 309#define SPR_970MMCR1 0x31e /* ... Monitor Mode Control Register 1 (PPC 970) */ 310#define SPR_970MMCRA 0x312 /* ... Monitor Mode Control Register 2 (PPC 970) */ 311#define SPR_970MMCR0 0x31b /* ... Monitor Mode Control Register 0 (PPC 970) */ 312#define SPR_970PMC1 0x313 /* ... PMC 1 */ 313#define SPR_970PMC2 0x314 /* ... PMC 2 */ 314#define SPR_970PMC3 0x315 /* ... PMC 3 */ 315#define SPR_970PMC4 0x316 /* ... PMC 4 */ 316#define SPR_970PMC5 0x317 /* ... PMC 5 */ 317#define SPR_970PMC6 0x318 /* ... PMC 6 */ 318#define SPR_970PMC7 0x319 /* ... PMC 7 */ 319#define SPR_970PMC8 0x31a /* ... PMC 8 */ 320 321#define SPR_MMCR0_FC 0x80000000 /* Freeze counters */ 322#define SPR_MMCR0_FCS 0x40000000 /* Freeze counters in supervisor mode */ 323#define SPR_MMCR0_FCP 0x20000000 /* Freeze counters in user mode */ 324#define SPR_MMCR0_FCM1 0x10000000 /* Freeze counters when mark=1 */ 325#define SPR_MMCR0_FCM0 0x08000000 /* Freeze counters when mark=0 */ 326#define SPR_MMCR0_PMXE 0x04000000 /* Enable PM interrupt */ 327#define SPR_MMCR0_FCECE 0x02000000 /* Freeze counters after event */ 328#define SPR_MMCR0_TBSEL_15 0x01800000 /* Count bit 15 of TBL */ 329#define SPR_MMCR0_TBSEL_19 0x01000000 /* Count bit 19 of TBL */ 330#define SPR_MMCR0_TBSEL_23 0x00800000 /* Count bit 23 of TBL */ 331#define SPR_MMCR0_TBSEL_31 0x00000000 /* Count bit 31 of TBL */ 332#define SPR_MMCR0_TBEE 0x00400000 /* Time-base event enable */ 333#define SPR_MMCRO_THRESHOLD(x) ((x) << 16) /* Threshold value */ 334#define SPR_MMCR0_PMC1CE 0x00008000 /* PMC1 condition enable */ 335#define SPR_MMCR0_PMCNCE 0x00004000 /* PMCn condition enable */ 336#define SPR_MMCR0_TRIGGER 0x00002000 /* Trigger */ 337#define SPR_MMCR0_PMC1SEL(x) ((x) << 6) /* PMC1 selector */ 338#define SPR_MMCR0_PMC2SEL(x) ((x) << 0) /* PMC2 selector */ 339#define SPR_970MMCR0_PMC1SEL(x) ((x) << 8) /* PMC1 selector (970) */ 340#define SPR_970MMCR0_PMC2SEL(x) ((x) << 1) /* PMC2 selector (970) */ 341#define SPR_SGR 0x3b9 /* 4.. Storage Guarded Register */ 342#define SPR_PMC1 0x3b9 /* .6. Performance Counter Register 1 */ 343#define SPR_DCWR 0x3ba /* 4.. Data Cache Write-through Register */ 344#define SPR_PMC2 0x3ba /* .6. Performance Counter Register 2 */ 345#define SPR_SLER 0x3bb /* 4.. Storage Little Endian Register */ 346#define SPR_SIA 0x3bb /* .6. Sampled Instruction Address */ 347#define SPR_MMCR1 0x3bc /* .6. Monitor Mode Control Register 2 */ 348#define SPR_MMCR1_PMC3SEL(x) ((x) << 27) /* PMC 3 selector */ 349#define SPR_MMCR1_PMC4SEL(x) ((x) << 22) /* PMC 4 selector */ 350#define SPR_MMCR1_PMC5SEL(x) ((x) << 17) /* PMC 5 selector */ 351#define SPR_MMCR1_PMC6SEL(x) ((x) << 11) /* PMC 6 selector */ 352 353#define SPR_SU0R 0x3bc /* 4.. Storage User-defined 0 Register */ 354#define SPR_PMC3 0x3bd /* .6. Performance Counter Register 3 */ 355#define SPR_PMC4 0x3be /* .6. Performance Counter Register 4 */ 356#define SPR_DMISS 0x3d0 /* .68 Data TLB Miss Address Register */ 357#define SPR_DCMP 0x3d1 /* .68 Data TLB Compare Register */ 358#define SPR_HASH1 0x3d2 /* .68 Primary Hash Address Register */ 359#define SPR_ICDBDR 0x3d3 /* 4.. Instruction Cache Debug Data Register */ 360#define SPR_HASH2 0x3d3 /* .68 Secondary Hash Address Register */ 361#define SPR_IMISS 0x3d4 /* .68 Instruction TLB Miss Address Register */ 362#define SPR_TLBMISS 0x3d4 /* .6. TLB Miss Address Register */ 363#define SPR_DEAR 0x3d5 /* 4.. Data Error Address Register */ 364#define SPR_ICMP 0x3d5 /* .68 Instruction TLB Compare Register */ 365#define SPR_PTEHI 0x3d5 /* .6. Instruction TLB Compare Register */ 366#define SPR_EVPR 0x3d6 /* 4.. Exception Vector Prefix Register */ 367#define SPR_RPA 0x3d6 /* .68 Required Physical Address Register */ 368#define SPR_PTELO 0x3d6 /* .6. Required Physical Address Register */ 369 370#define SPR_TSR 0x150 /* ..8 Timer Status Register */ 371#define SPR_TCR 0x154 /* ..8 Timer Control Register */ 372 373#define TSR_ENW 0x80000000 /* Enable Next Watchdog */ 374#define TSR_WIS 0x40000000 /* Watchdog Interrupt Status */ 375#define TSR_WRS_MASK 0x30000000 /* Watchdog Reset Status */ 376#define TSR_WRS_NONE 0x00000000 /* No watchdog reset has occurred */ 377#define TSR_WRS_CORE 0x10000000 /* Core reset was forced by the watchdog */ 378#define TSR_WRS_CHIP 0x20000000 /* Chip reset was forced by the watchdog */ 379#define TSR_WRS_SYSTEM 0x30000000 /* System reset was forced by the watchdog */ 380#define TSR_PIS 0x08000000 /* PIT Interrupt Status */ 381#define TSR_DIS 0x08000000 /* Decrementer Interrupt Status */ 382#define TSR_FIS 0x04000000 /* FIT Interrupt Status */ 383 384#define TCR_WP_MASK 0xc0000000 /* Watchdog Period mask */ 385#define TCR_WP_2_17 0x00000000 /* 2**17 clocks */ 386#define TCR_WP_2_21 0x40000000 /* 2**21 clocks */ 387#define TCR_WP_2_25 0x80000000 /* 2**25 clocks */ 388#define TCR_WP_2_29 0xc0000000 /* 2**29 clocks */ 389#define TCR_WRC_MASK 0x30000000 /* Watchdog Reset Control mask */ 390#define TCR_WRC_NONE 0x00000000 /* No watchdog reset */ 391#define TCR_WRC_CORE 0x10000000 /* Core reset */ 392#define TCR_WRC_CHIP 0x20000000 /* Chip reset */ 393#define TCR_WRC_SYSTEM 0x30000000 /* System reset */ 394#define TCR_WIE 0x08000000 /* Watchdog Interrupt Enable */ 395#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */ 396#define TCR_DIE 0x04000000 /* Pecrementer Interrupt Enable */ 397#define TCR_FP_MASK 0x03000000 /* FIT Period */ 398#define TCR_FP_2_9 0x00000000 /* 2**9 clocks */ 399#define TCR_FP_2_13 0x01000000 /* 2**13 clocks */ 400#define TCR_FP_2_17 0x02000000 /* 2**17 clocks */ 401#define TCR_FP_2_21 0x03000000 /* 2**21 clocks */ 402#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */ 403#define TCR_ARE 0x00400000 /* Auto Reload Enable */ 404 405#define SPR_PIT 0x3db /* 4.. Programmable Interval Timer */ 406#define SPR_SRR2 0x3de /* 4.. Save/Restore Register 2 */ 407#define SPR_SRR3 0x3df /* 4.. Save/Restore Register 3 */ 408#define SPR_HID0 0x3f0 /* ..8 Hardware Implementation Register 0 */ 409#define SPR_HID1 0x3f1 /* ..8 Hardware Implementation Register 1 */ 410#define SPR_HID4 0x3f4 /* ..8 Hardware Implementation Register 4 */ 411#define SPR_HID5 0x3f6 /* ..8 Hardware Implementation Register 5 */ 412 413#if defined(AIM) 414#define SPR_DBSR 0x3f0 /* 4.. Debug Status Register */ 415#define DBSR_IC 0x80000000 /* Instruction completion debug event */ 416#define DBSR_BT 0x40000000 /* Branch Taken debug event */ 417#define DBSR_EDE 0x20000000 /* Exception debug event */ 418#define DBSR_TIE 0x10000000 /* Trap Instruction debug event */ 419#define DBSR_UDE 0x08000000 /* Unconditional debug event */ 420#define DBSR_IA1 0x04000000 /* IAC1 debug event */ 421#define DBSR_IA2 0x02000000 /* IAC2 debug event */ 422#define DBSR_DR1 0x01000000 /* DAC1 Read debug event */ 423#define DBSR_DW1 0x00800000 /* DAC1 Write debug event */ 424#define DBSR_DR2 0x00400000 /* DAC2 Read debug event */ 425#define DBSR_DW2 0x00200000 /* DAC2 Write debug event */ 426#define DBSR_IDE 0x00100000 /* Imprecise debug event */ 427#define DBSR_IA3 0x00080000 /* IAC3 debug event */ 428#define DBSR_IA4 0x00040000 /* IAC4 debug event */ 429#define DBSR_MRR 0x00000300 /* Most recent reset */ 430#define SPR_DBCR0 0x3f2 /* 4.. Debug Control Register 0 */ 431#define SPR_DBCR1 0x3bd /* 4.. Debug Control Register 1 */ 432#define SPR_IAC1 0x3f4 /* 4.. Instruction Address Compare 1 */ 433#define SPR_IAC2 0x3f5 /* 4.. Instruction Address Compare 2 */ 434#define SPR_DAC1 0x3f6 /* 4.. Data Address Compare 1 */ 435#define SPR_DAC2 0x3f7 /* 4.. Data Address Compare 2 */ 436#define SPR_PIR 0x3ff /* .6. Processor Identification Register */ 437#elif defined(E500) 438#define SPR_PIR 0x11e /* ..8 Processor Identification Register */ 439#define SPR_DBSR 0x130 /* ..8 Debug Status Register */ 440#define DBSR_IDE 0x80000000 /* Imprecise debug event. */ 441#define DBSR_UDE 0x40000000 /* Unconditional debug event. */ 442#define DBSR_MRR 0x30000000 /* Most recent Reset (mask). */ 443#define DBSR_ICMP 0x08000000 /* Instr. complete debug event. */ 444#define DBSR_BRT 0x04000000 /* Branch taken debug event. */ 445#define DBSR_IRPT 0x02000000 /* Interrupt taken debug event. */ 446#define DBSR_TRAP 0x01000000 /* Trap instr. debug event. */ 447#define DBSR_IAC1 0x00800000 /* Instr. address compare #1. */ 448#define DBSR_IAC2 0x00400000 /* Instr. address compare #2. */ 449#define DBSR_IAC3 0x00200000 /* Instr. address compare #3. */ 450#define DBSR_IAC4 0x00100000 /* Instr. address compare #4. */ 451#define DBSR_DAC1R 0x00080000 /* Data addr. read compare #1. */ 452#define DBSR_DAC1W 0x00040000 /* Data addr. write compare #1. */ 453#define DBSR_DAC2R 0x00020000 /* Data addr. read compare #2. */ 454#define DBSR_DAC2W 0x00010000 /* Data addr. write compare #2. */ 455#define DBSR_RET 0x00008000 /* Return debug event. */ 456#define SPR_DBCR0 0x134 /* ..8 Debug Control Register 0 */ 457#define SPR_DBCR1 0x135 /* ..8 Debug Control Register 1 */ 458#define SPR_IAC1 0x138 /* ..8 Instruction Address Compare 1 */ 459#define SPR_IAC2 0x139 /* ..8 Instruction Address Compare 2 */ 460#define SPR_DAC1 0x13c /* ..8 Data Address Compare 1 */ 461#define SPR_DAC2 0x13d /* ..8 Data Address Compare 2 */ 462#endif 463 464#define DBCR0_EDM 0x80000000 /* External Debug Mode */ 465#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ 466#define DBCR0_RST_MASK 0x30000000 /* ReSeT */ 467#define DBCR0_RST_NONE 0x00000000 /* No action */ 468#define DBCR0_RST_CORE 0x10000000 /* Core reset */ 469#define DBCR0_RST_CHIP 0x20000000 /* Chip reset */ 470#define DBCR0_RST_SYSTEM 0x30000000 /* System reset */ 471#define DBCR0_IC 0x08000000 /* Instruction Completion debug event */ 472#define DBCR0_BT 0x04000000 /* Branch Taken debug event */ 473#define DBCR0_EDE 0x02000000 /* Exception Debug Event */ 474#define DBCR0_TDE 0x01000000 /* Trap Debug Event */ 475#define DBCR0_IA1 0x00800000 /* IAC (Instruction Address Compare) 1 debug event */ 476#define DBCR0_IA2 0x00400000 /* IAC 2 debug event */ 477#define DBCR0_IA12 0x00200000 /* Instruction Address Range Compare 1-2 */ 478#define DBCR0_IA12X 0x00100000 /* IA12 eXclusive */ 479#define DBCR0_IA3 0x00080000 /* IAC 3 debug event */ 480#define DBCR0_IA4 0x00040000 /* IAC 4 debug event */ 481#define DBCR0_IA34 0x00020000 /* Instruction Address Range Compare 3-4 */ 482#define DBCR0_IA34X 0x00010000 /* IA34 eXclusive */ 483#define DBCR0_IA12T 0x00008000 /* Instruction Address Range Compare 1-2 range Toggle */ 484#define DBCR0_IA34T 0x00004000 /* Instruction Address Range Compare 3-4 range Toggle */ 485#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ 486 487#define SPR_IABR 0x3f2 /* ..8 Instruction Address Breakpoint Register 0 */ 488#define SPR_DABR 0x3f5 /* .6. Data Address Breakpoint Register */ 489#define SPR_MSSCR0 0x3f6 /* .6. Memory SubSystem Control Register */ 490#define MSSCR0_SHDEN 0x80000000 /* 0: Shared-state enable */ 491#define MSSCR0_SHDPEN3 0x40000000 /* 1: ~SHD[01] signal enable in MEI mode */ 492#define MSSCR0_L1INTVEN 0x38000000 /* 2-4: L1 data cache ~HIT intervention enable */ 493#define MSSCR0_L2INTVEN 0x07000000 /* 5-7: L2 data cache ~HIT intervention enable*/ 494#define MSSCR0_DL1HWF 0x00800000 /* 8: L1 data cache hardware flush */ 495#define MSSCR0_MBO 0x00400000 /* 9: must be one */ 496#define MSSCR0_EMODE 0x00200000 /* 10: MPX bus mode (read-only) */ 497#define MSSCR0_ABD 0x00100000 /* 11: address bus driven (read-only) */ 498#define MSSCR0_MBZ 0x000fffff /* 12-31: must be zero */ 499#define SPR_L2PM 0x3f8 /* .6. L2 Private Memory Control Register */ 500#define SPR_L2CR 0x3f9 /* .6. L2 Control Register */ 501#define L2CR_L2E 0x80000000 /* 0: L2 enable */ 502#define L2CR_L2PE 0x40000000 /* 1: L2 data parity enable */ 503#define L2CR_L2SIZ 0x30000000 /* 2-3: L2 size */ 504#define L2SIZ_2M 0x00000000 505#define L2SIZ_256K 0x10000000 506#define L2SIZ_512K 0x20000000 507#define L2SIZ_1M 0x30000000 508#define L2CR_L2CLK 0x0e000000 /* 4-6: L2 clock ratio */ 509#define L2CLK_DIS 0x00000000 /* disable L2 clock */ 510#define L2CLK_10 0x02000000 /* core clock / 1 */ 511#define L2CLK_15 0x04000000 /* / 1.5 */ 512#define L2CLK_20 0x08000000 /* / 2 */ 513#define L2CLK_25 0x0a000000 /* / 2.5 */ 514#define L2CLK_30 0x0c000000 /* / 3 */ 515#define L2CR_L2RAM 0x01800000 /* 7-8: L2 RAM type */ 516#define L2RAM_FLOWTHRU_BURST 0x00000000 517#define L2RAM_PIPELINE_BURST 0x01000000 518#define L2RAM_PIPELINE_LATE 0x01800000 519#define L2CR_L2DO 0x00400000 /* 9: L2 data-only. 520 Setting this bit disables instruction 521 caching. */ 522#define L2CR_L2I 0x00200000 /* 10: L2 global invalidate. */ 523#define L2CR_L2CTL 0x00100000 /* 11: L2 RAM control (ZZ enable). 524 Enables automatic operation of the 525 L2ZZ (low-power mode) signal. */ 526#define L2CR_L2WT 0x00080000 /* 12: L2 write-through. */ 527#define L2CR_L2TS 0x00040000 /* 13: L2 test support. */ 528#define L2CR_L2OH 0x00030000 /* 14-15: L2 output hold. */ 529#define L2CR_L2SL 0x00008000 /* 16: L2 DLL slow. */ 530#define L2CR_L2DF 0x00004000 /* 17: L2 differential clock. */ 531#define L2CR_L2BYP 0x00002000 /* 18: L2 DLL bypass. */ 532#define L2CR_L2FA 0x00001000 /* 19: L2 flush assist (for software flush). */ 533#define L2CR_L2HWF 0x00000800 /* 20: L2 hardware flush. */ 534#define L2CR_L2IO 0x00000400 /* 21: L2 instruction-only. */ 535#define L2CR_L2CLKSTP 0x00000200 /* 22: L2 clock stop. */ 536#define L2CR_L2DRO 0x00000100 /* 23: L2DLL rollover checkstop enable. */ 537#define L2CR_L2IP 0x00000001 /* 31: L2 global invalidate in */ 538 /* progress (read only). */ 539 540#define SPR_L3CR 0x3fa /* .6. L3 Control Register */ 541#define L3CR_L3E 0x80000000 /* 0: L3 enable */ 542#define L3CR_L3PE 0x40000000 /* 1: L3 data parity enable */ 543#define L3CR_L3APE 0x20000000 544#define L3CR_L3SIZ 0x10000000 /* 3: L3 size (0=1MB, 1=2MB) */ 545#define L3CR_L3CLKEN 0x08000000 /* 4: Enables L3_CLK[0:1] */ 546#define L3CR_L3CLK 0x03800000 547#define L3CR_L3IO 0x00400000 548#define L3CR_L3CLKEXT 0x00200000 549#define L3CR_L3CKSPEXT 0x00100000 550#define L3CR_L3OH1 0x00080000 551#define L3CR_L3SPO 0x00040000 552#define L3CR_L3CKSP 0x00030000 553#define L3CR_L3PSP 0x0000e000 554#define L3CR_L3REP 0x00001000 555#define L3CR_L3HWF 0x00000800 556#define L3CR_L3I 0x00000400 /* 21: L3 global invalidate */ 557#define L3CR_L3RT 0x00000300 558#define L3CR_L3NIRCA 0x00000080 559#define L3CR_L3DO 0x00000040 560#define L3CR_PMEN 0x00000004 561#define L3CR_PMSIZ 0x00000003 562 563#define SPR_DCCR 0x3fa /* 4.. Data Cache Cachability Register */ 564#define SPR_ICCR 0x3fb /* 4.. Instruction Cache Cachability Register */ 565#define SPR_THRM1 0x3fc /* .6. Thermal Management Register */ 566#define SPR_THRM2 0x3fd /* .6. Thermal Management Register */ 567#define SPR_THRM_TIN 0x80000000 /* Thermal interrupt bit (RO) */ 568#define SPR_THRM_TIV 0x40000000 /* Thermal interrupt valid (RO) */ 569#define SPR_THRM_THRESHOLD(x) ((x) << 23) /* Thermal sensor threshold */ 570#define SPR_THRM_TID 0x00000004 /* Thermal interrupt direction */ 571#define SPR_THRM_TIE 0x00000002 /* Thermal interrupt enable */ 572#define SPR_THRM_VALID 0x00000001 /* Valid bit */ 573#define SPR_THRM3 0x3fe /* .6. Thermal Management Register */ 574#define SPR_THRM_TIMER(x) ((x) << 1) /* Sampling interval timer */ 575#define SPR_THRM_ENABLE 0x00000001 /* TAU Enable */ 576#define SPR_FPECR 0x3fe /* .6. Floating-Point Exception Cause Register */ 577 578/* Time Base Register declarations */ 579#define TBR_TBL 0x10c /* 468 Time Base Lower - read */ 580#define TBR_TBU 0x10d /* 468 Time Base Upper - read */ 581#define TBR_TBWL 0x11c /* 468 Time Base Lower - supervisor, write */ 582#define TBR_TBWU 0x11d /* 468 Time Base Upper - supervisor, write */ 583 584/* Performance counter declarations */ 585#define PMC_OVERFLOW 0x80000000 /* Counter has overflowed */ 586 587/* The first five countable [non-]events are common to many PMC's */ 588#define PMCN_NONE 0 /* Count nothing */ 589#define PMCN_CYCLES 1 /* Processor cycles */ 590#define PMCN_ICOMP 2 /* Instructions completed */ 591#define PMCN_TBLTRANS 3 /* TBL bit transitions */ 592#define PCMN_IDISPATCH 4 /* Instructions dispatched */ 593 594/* Similar things for the 970 PMC direct counters */ 595#define PMC970N_NONE 0x8 /* Count nothing */ 596#define PMC970N_CYCLES 0xf /* Processor cycles */ 597#define PMC970N_ICOMP 0x9 /* Instructions completed */ 598 599#if defined(AIM) 600 601#define SPR_ESR 0x3d4 /* 4.. Exception Syndrome Register */ 602#define ESR_MCI 0x80000000 /* Machine check - instruction */ 603#define ESR_PIL 0x08000000 /* Program interrupt - illegal */ 604#define ESR_PPR 0x04000000 /* Program interrupt - privileged */ 605#define ESR_PTR 0x02000000 /* Program interrupt - trap */ 606#define ESR_ST 0x01000000 /* Store operation */ 607#define ESR_DST 0x00800000 /* Data storage interrupt - store fault */ 608#define ESR_DIZ 0x00800000 /* Data/instruction storage interrupt - zone fault */ 609#define ESR_U0F 0x00008000 /* Data storage interrupt - U0 fault */ 610 611#elif defined(E500) 612 613#define SPR_ESR 0x003e /* ..8 Exception Syndrome Register */ 614#define ESR_PIL 0x08000000 /* Program interrupt - illegal */ 615#define ESR_PPR 0x04000000 /* Program interrupt - privileged */ 616#define ESR_PTR 0x02000000 /* Program interrupt - trap */ 617#define ESR_ST 0x00800000 /* Store operation */ 618#define ESR_DLK 0x00200000 /* Data storage, D cache locking */ 619#define ESR_ILK 0x00100000 /* Data storage, I cache locking */ 620#define ESR_BO 0x00020000 /* Data/instruction storage, byte ordering */ 621#define ESR_SPE 0x00000080 /* SPE exception bit */ 622 623#define SPR_CSRR0 0x03a /* ..8 58 Critical SRR0 */ 624#define SPR_CSRR1 0x03b /* ..8 59 Critical SRR1 */ 625#define SPR_MCSRR0 0x23a /* ..8 570 Machine check SRR0 */ 626#define SPR_MCSRR1 0x23b /* ..8 571 Machine check SRR1 */ 627 628#define SPR_SVR 0x3ff /* ..8 1023 System Version Register */ 629#define SVR_MPC8533 0x803c 630#define SVR_MPC8533E 0x8034 631#define SVR_MPC8541 0x8072 632#define SVR_MPC8541E 0x807a 633#define SVR_MPC8548 0x8031 634#define SVR_MPC8548E 0x8039 635#define SVR_MPC8555 0x8071 636#define SVR_MPC8555E 0x8079 637#define SVR_MPC8572 0x80e0 638#define SVR_MPC8572E 0x80e8 639#define SVR_VER(svr) (((svr) >> 16) & 0xffff) 640 641#define SPR_PID0 0x030 /* ..8 Process ID Register 0 */ 642#define SPR_PID1 0x279 /* ..8 Process ID Register 1 */ 643#define SPR_PID2 0x27a /* ..8 Process ID Register 2 */ 644 645#define SPR_TLB0CFG 0x2B0 /* ..8 TLB 0 Config Register */ 646#define SPR_TLB1CFG 0x2B1 /* ..8 TLB 1 Config Register */ 647#define TLBCFG_ASSOC_MASK 0xff000000 /* Associativity of TLB */ 648#define TLBCFG_ASSOC_SHIFT 24 649#define TLBCFG_NENTRY_MASK 0x00000fff /* Number of entries in TLB */ 650 651#define SPR_IVPR 0x03f /* ..8 Interrupt Vector Prefix Register */ 652#define SPR_IVOR0 0x190 /* ..8 Critical input */ 653#define SPR_IVOR1 0x191 /* ..8 Machine check */ 654#define SPR_IVOR2 0x192 655#define SPR_IVOR3 0x193 656#define SPR_IVOR4 0x194 657#define SPR_IVOR5 0x195 658#define SPR_IVOR6 0x196 659#define SPR_IVOR7 0x197 660#define SPR_IVOR8 0x198 661#define SPR_IVOR9 0x199 662#define SPR_IVOR10 0x19a 663#define SPR_IVOR11 0x19b 664#define SPR_IVOR12 0x19c 665#define SPR_IVOR13 0x19d 666#define SPR_IVOR14 0x19e 667#define SPR_IVOR15 0x19f 668#define SPR_IVOR32 0x210 669#define SPR_IVOR33 0x211 670#define SPR_IVOR34 0x212 671#define SPR_IVOR35 0x213 672 673#define SPR_MAS0 0x270 /* ..8 MMU Assist Register 0 Book-E/e500 */ 674#define SPR_MAS1 0x271 /* ..8 MMU Assist Register 1 Book-E/e500 */ 675#define SPR_MAS2 0x272 /* ..8 MMU Assist Register 2 Book-E/e500 */ 676#define SPR_MAS3 0x273 /* ..8 MMU Assist Register 3 Book-E/e500 */ 677#define SPR_MAS4 0x274 /* ..8 MMU Assist Register 4 Book-E/e500 */ 678#define SPR_MAS5 0x275 /* ..8 MMU Assist Register 5 Book-E */ 679#define SPR_MAS6 0x276 /* ..8 MMU Assist Register 6 Book-E/e500 */ 680#define SPR_MAS7 0x3B0 /* ..8 MMU Assist Register 7 Book-E/e500 */ 681 682#define SPR_L1CSR0 0x3F2 /* ..8 L1 Cache Control and Status Register 0 */ 683#define L1CSR0_DCPE 0x00010000 /* Data Cache Parity Enable */ 684#define L1CSR0_DCLFR 0x00000100 /* Data Cache Lock Bits Flash Reset */ 685#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */ 686#define L1CSR0_DCE 0x00000001 /* Data Cache Enable */ 687#define SPR_L1CSR1 0x3F3 /* ..8 L1 Cache Control and Status Register 1 */ 688#define L1CSR1_ICPE 0x00010000 /* Instruction Cache Parity Enable */ 689#define L1CSR1_ICLFR 0x00000100 /* Instruction Cache Lock Bits Flash Reset */ 690#define L1CSR1_ICFI 0x00000002 /* Instruction Cache Flash Invalidate */ 691#define L1CSR1_ICE 0x00000001 /* Instruction Cache Enable */ 692 693#define SPR_BUCSR 0x3F5 /* ..8 Branch Unit Control and Status Register */ 694#define BUCSR_BPEN 0x00000001 /* Branch Prediction Enable */ 695 696#endif /* #elif defined(E500) */ 697 698#endif /* !_POWERPC_SPR_H_ */ 699