NOTES revision 156272
1# 2# NOTES -- Lines that can be cut/pasted into kernel and hints configs. 3# 4# This file contains machine dependent kernel configuration notes. For 5# machine independent notes, look in /sys/conf/NOTES. 6# 7# $FreeBSD: head/sys/pc98/conf/NOTES 156272 2006-03-04 07:31:58Z nyan $ 8# 9 10options PC98 11 12# 13# We want LINT to cover profiling as well. 14profile 2 15 16 17##################################################################### 18# SMP OPTIONS: 19# 20# The apic device enables the use of the I/O APIC for interrupt delivery. 21# The apic device can be used in both UP and SMP kernels, but is required 22# for SMP kernels. Thus, the apic device is not strictly an SMP option, 23# but it is a prerequisite for SMP. 24# 25 26# Mandatory: 27device apic # I/O apic 28 29# 30# Watchdog routines. 31# 32options MP_WATCHDOG 33 34# Debugging options. 35# 36options STOP_NMI # Stop CPUS using NMI instead of IPI 37 38 39 40##################################################################### 41# CPU OPTIONS 42 43# 44# You must specify at least one CPU (the one you intend to run on); 45# deleting the specification for CPUs you don't need to use may make 46# parts of the system run faster. 47# 48cpu I486_CPU 49cpu I586_CPU # aka Pentium(tm) 50cpu I686_CPU # aka Pentium Pro(tm) 51 52# 53# Options for CPU features. 54# 55# CPU_BLUELIGHTNING_3X enables triple-clock mode on IBM Blue Lightning 56# CPU if CPU supports it. The default is double-clock mode on 57# BlueLightning CPU box. 58# 59# CPU_BLUELIGHTNING_FPU_OP_CACHE enables FPU operand cache on IBM 60# BlueLightning CPU. It works only with Cyrix FPU, and this option 61# should not be used with Intel FPU. 62# 63# CPU_BTB_EN enables branch target buffer on Cyrix 5x86 (NOTE 1). 64# 65# CPU_CYRIX_NO_LOCK enables weak locking for the entire address space 66# of Cyrix 6x86 and 6x86MX CPUs by setting the NO_LOCK bit of CCR1. 67# Otherwise, the NO_LOCK bit of CCR1 is cleared. (NOTE 3) 68# 69# CPU_DIRECT_MAPPED_CACHE sets L1 cache of Cyrix 486DLC CPU in direct 70# mapped mode. Default is 2-way set associative mode. 71# 72# CPU_DISABLE_5X86_LSSER disables load store serialize (i.e., enables 73# reorder). This option should not be used if you use memory mapped 74# I/O device(s). 75# 76# CPU_DISABLE_CMPXCHG disables the CMPXCHG instruction on > i386 IA32 77# machines. VmWare 3.x seems to emulate this instruction poorly, causing 78# the guest OS to run very slowly. This problem appears to be fixed in 79# VmWare 4.x, at least in version 4.5.2, so that enabling this option with 80# VmWare 4.x will result in locking operations to be 20-30 times slower. 81# Enabling this with an SMP kernel will cause the kernel to be unusable. 82# 83# CPU_DISABLE_SSE explicitly prevents I686_CPU from turning on SSE. 84# 85# CPU_FASTER_5X86_FPU enables faster FPU exception handler. 86# 87# CPU_I486_ON_386 enables CPU cache on i486 based CPU upgrade products 88# for i386 machines. 89# 90# CPU_IORT defines I/O clock delay time (NOTE 1). Default values of 91# I/O clock delay time on Cyrix 5x86 and 6x86 are 0 and 7,respectively 92# (no clock delay). 93# 94# CPU_L2_LATENCY specifies the L2 cache latency value. This option is used 95# only when CPU_PPRO2CELERON is defined and Mendocino Celeron is detected. 96# The default value is 5. 97# 98# CPU_LOOP_EN prevents flushing the prefetch buffer if the destination 99# of a jump is already present in the prefetch buffer on Cyrix 5x86(NOTE 100# 1). 101# 102# CPU_PPRO2CELERON enables L2 cache of Mendocino Celeron CPUs. This option 103# is useful when you use Socket 8 to Socket 370 converter, because most Pentium 104# Pro BIOSs do not enable L2 cache of Mendocino Celeron CPUs. 105# 106# CPU_RSTK_EN enables return stack on Cyrix 5x86 (NOTE 1). 107# 108# CPU_SUSP_HLT enables suspend on HALT. If this option is set, CPU 109# enters suspend mode following execution of HALT instruction. 110# 111# CPU_UPGRADE_HW_CACHE eliminates unneeded cache flush instruction(s). 112# 113# CPU_WT_ALLOC enables write allocation on Cyrix 6x86/6x86MX and AMD 114# K5/K6/K6-2 CPUs. 115# 116# CYRIX_CACHE_WORKS enables CPU cache on Cyrix 486 CPUs with cache 117# flush at hold state. 118# 119# CYRIX_CACHE_REALLY_WORKS enables (1) CPU cache on Cyrix 486 CPUs 120# without cache flush at hold state, and (2) write-back CPU cache on 121# Cyrix 6x86 whose revision < 2.7 (NOTE 2). 122# 123# NO_F00F_HACK disables the hack that prevents Pentiums (and ONLY 124# Pentiums) from locking up when a LOCK CMPXCHG8B instruction is 125# executed. This option is only needed if I586_CPU is also defined, 126# and should be included for any non-Pentium CPU that defines it. 127# 128# NO_MEMORY_HOLE is an optimisation for systems with AMD K6 processors 129# which indicates that the 15-16MB range is *definitely* not being 130# occupied by an ISA memory hole. 131# 132# NOTE 1: The options, CPU_BTB_EN, CPU_LOOP_EN, CPU_IORT, 133# CPU_LOOP_EN and CPU_RSTK_EN should not be used because of CPU bugs. 134# These options may crash your system. 135# 136# NOTE 2: If CYRIX_CACHE_REALLY_WORKS is not set, CPU cache is enabled 137# in write-through mode when revision < 2.7. If revision of Cyrix 138# 6x86 >= 2.7, CPU cache is always enabled in write-back mode. 139# 140# NOTE 3: This option may cause failures for software that requires 141# locked cycles in order to operate correctly. 142# 143options CPU_BLUELIGHTNING_3X 144options CPU_BLUELIGHTNING_FPU_OP_CACHE 145options CPU_BTB_EN 146options CPU_DIRECT_MAPPED_CACHE 147options CPU_DISABLE_5X86_LSSER 148options CPU_DISABLE_CMPXCHG 149#options CPU_DISABLE_SSE 150options CPU_FASTER_5X86_FPU 151options CPU_I486_ON_386 152options CPU_IORT 153options CPU_L2_LATENCY=5 154options CPU_LOOP_EN 155options CPU_PPRO2CELERON 156options CPU_RSTK_EN 157options CPU_SUSP_HLT 158options CPU_UPGRADE_HW_CACHE 159options CPU_WT_ALLOC 160options CYRIX_CACHE_WORKS 161options CYRIX_CACHE_REALLY_WORKS 162#options NO_F00F_HACK 163 164# Debug options 165options NPX_DEBUG # enable npx debugging 166 167# 168# PERFMON causes the driver for Pentium/Pentium Pro performance counters 169# to be compiled. See perfmon(4) for more information. 170# 171options PERFMON 172 173 174##################################################################### 175# NETWORKING OPTIONS 176 177# 178# DEVICE_POLLING adds support for mixed interrupt-polling handling 179# of network device drivers, which has significant benefits in terms 180# of robustness to overloads and responsivity, as well as permitting 181# accurate scheduling of the CPU time between kernel network processing 182# and other activities. The drawback is a moderate (up to 1/HZ seconds) 183# potential increase in response times. 184# It is strongly recommended to use HZ=1000 or 2000 with DEVICE_POLLING 185# to achieve smoother behaviour. 186# Additionally, you can enable/disable polling at runtime with help of 187# the ifconfig(8) utility, and select the CPU fraction reserved to 188# userland with the sysctl variable kern.polling.user_frac 189# (default 50, range 0..100). 190# 191# Not all device drivers support this mode of operation at the time of 192# this writing. See polling(4) for more details. 193 194options DEVICE_POLLING 195 196 197##################################################################### 198# CLOCK OPTIONS 199 200# The following options are used for debugging clock behavior only, and 201# should not be used for production systems. 202 203# CLK_CALIBRATION_LOOP causes clock calibration to be run in a loop at 204# startup until the user presses a key. (The i8254 clock is always 205# calibrated relative to the RTC (mc146818a) and this option causes the 206# calibration to be repeated.) 207options CLK_CALIBRATION_LOOP 208 209# CLK_USE_I8254_CALIBRATION causes the calibrated frequency of the i8254 210# clock to actually be used. 211options CLK_USE_I8254_CALIBRATION 212 213 214##################################################################### 215# MISCELLANEOUS DEVICES AND OPTIONS 216 217device speaker #Play IBM BASIC-style noises out your speaker 218hint.speaker.0.at="isa" 219hint.speaker.0.port="0x35" 220device gzip #Exec gzipped a.out's. REQUIRES COMPAT_AOUT! 221device apm_saver # Requires APM 222 223 224##################################################################### 225# HARDWARE BUS CONFIGURATION 226 227# 228# ISA bus 229# 230device isa 231 232# 233# Options for `isa': 234# 235# AUTO_EOI_1 enables the `automatic EOI' feature for the master 8259A 236# interrupt controller. This saves about 0.7-1.25 usec for each interrupt. 237# This option breaks suspend/resume on some portables. 238# 239# MAXMEM specifies the amount of RAM on the machine; if this is not 240# specified, FreeBSD will first read the amount of memory from the CMOS 241# RAM, so the amount of memory will initially be limited to 64MB or 16MB 242# depending on the BIOS. If the BIOS reports 64MB, a memory probe will 243# then attempt to detect the installed amount of RAM. If this probe 244# fails to detect >64MB RAM you will have to use the MAXMEM option. 245# The amount is in kilobytes, so for a machine with 128MB of RAM, it would 246# be 131072 (128 * 1024). 247# 248# BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to 249# reset the CPU for reboot. This is needed on some systems with broken 250# keyboard controllers. 251 252options AUTO_EOI_1 253 254options MAXMEM=(128*1024) 255#options BROKEN_KEYBOARD_RESET 256options EPSON_BOUNCEDMA 257options EPSON_MEMWIN 258 259# 260# PCI bus & PCI options: 261# 262device pci 263 264# 265# AGP GART support 266device agp 267 268 269##################################################################### 270# HARDWARE DEVICE CONFIGURATION 271 272# PC98 keyboard 273device pckbd 274hint.pckbd.0.at="isa" 275hint.pckbd.0.port="0x041" 276hint.pckbd.0.irq="1" 277 278# These options are valid for other keyboard drivers as well. 279options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap 280options KBD_INSTALL_CDEV # install a CDEV entry in /dev 281 282# GDC screen 283device gdc 284hint.gdc.0.at="isa" 285options LINE30 286 287# 288# The Numeric Processing eXtension driver. This is non-optional. 289device npx 290 291# 292# `flags' for npx0: 293# 0x01 don't use the npx registers to optimize bcopy. 294# 0x02 don't use the npx registers to optimize bzero. 295# 0x04 don't use the npx registers to optimize copyin or copyout. 296# The npx registers are normally used to optimize copying and zeroing when 297# all of the following conditions are satisfied: 298# I586_CPU is an option 299# the cpu is an i586 (perhaps not a Pentium) 300# the probe for npx0 succeeds 301# INT 16 exception handling works. 302# Then copying and zeroing using the npx registers is normally 30-100% faster. 303# The flags can be used to control cases where it doesn't work or is slower. 304# Setting them at boot time using hints works right (the optimizations 305# are not used until later in the bootstrap when npx0 is attached). 306# Flag 0x08 automatically disables the i586 optimized routines. 307# 308 309# 310# Optional devices: 311# 312 313# 3Dfx Voodoo Graphics, Voodoo II /dev/3dfx CDEV support. This will create 314# the /dev/3dfx0 device to work with glide implementations. This should get 315# linked to /dev/3dfx and /dev/voodoo. Note that this is not the same as 316# the tdfx DRI module from XFree86 and is completely unrelated. 317# 318# To enable Linuxulator support, one must also include COMPAT_LINUX in the 319# config as well. The other option is to load both as modules. 320 321device tdfx # Enable 3Dfx Voodoo support 322device tdfx_linux # Enable Linuxulator support 323 324# Direct Rendering modules for 3D acceleration. 325device drm # DRM core module required by DRM drivers 326device mach64drm # ATI Rage Pro, Rage Mobility P/M, Rage XL 327device mgadrm # AGP Matrox G200, G400, G450, G550 328device r128drm # ATI Rage 128 329device radeondrm # ATI Radeon 330device savagedrm # S3 Savage3D, Savage4 331device sisdrm # SiS 300/305, 540, 630 332device tdfxdrm # 3dfx Voodoo 3/4/5 and Banshee 333options DRM_DEBUG # Include debug printfs (slow) 334 335# 336# Bus mouse 337# 338device mse 339hint.mse.0.at="isa" 340hint.mse.0.port="0x7fd9" 341hint.mse.0.irq="13" 342 343# 344# Network interfaces: 345# 346 347# ar: Arnet SYNC/570i hdlc sync 2/4 port V.35/X.21 serial driver 348# (requires sppp) 349# ce: Cronyx Tau-PCI/32 sync single/dual port G.703/E1 serial adaptor 350# with 32 HDLC subchannels (requires sppp (default), or NETGRAPH if 351# NETGRAPH_CRONYX is configured) 352# cp: Cronyx Tau-PCI sync single/dual/four port 353# V.35/RS-232/RS-530/RS-449/X.21/G.703/E1/E3/T3/STS-1 354# serial adaptor (requires sppp (default), or NETGRAPH if 355# NETGRAPH_CRONYX is configured) 356# cs: IBM Etherjet and other Crystal Semi CS89x0-based adapters and pccard 357# ed: Western Digital and SMC 80xx; Novell NE1000 and NE2000; 3Com 3C503 358# HP PC Lan+, various PC Card devices 359# (requires miibus) 360# ie: AT&T StarLAN 10 and EN100; 3Com 3C507; unknown NI5210; 361# Intel EtherExpress 362# lnc: Lance/PCnet cards (Isolan, Novell NE2100, NE32-VL, AMD Am7990 and 363# Am79C960) 364# oltr: Olicom ISA token-ring adapters OC-3115, OC-3117, OC-3118 and OC-3133. 365# Olicom PCI token-ring adapters OC-3136, OC-3137, OC-3139, OC-3140, 366# OC-3141, OC-3540 and OC-3250. 367# sbni: Granch SBNI12-xx ISA and PCI adapters 368# sr: RISCom/N2 hdlc sync 1/2 port V.35/X.21 serial driver (requires sppp) 369 370# Order for ISA/EISA devices is important here 371 372device ar 373device ce 374device cp 375device cs 376device ed 377hint.ed.0.at="isa" 378hint.ed.0.port="0x280" 379hint.ed.0.irq="5" 380hint.ed.0.maddr="0xd8000" 381device ie # Hints only required for Starlan 382hint.ie.2.at="isa" 383hint.ie.2.port="0x300" 384hint.ie.2.irq="5" 385hint.ie.2.maddr="0xd0000" 386device lnc 387hint.lnc.0.at="isa" 388hint.lnc.0.port="0x280" 389hint.lnc.0.irq="10" 390hint.lnc.0.drq="0" 391device sbni 392hint.sbni.0.at="isa" 393hint.sbni.0.port="0x210" 394hint.sbni.0.irq="0xefdead" 395hint.sbni.0.flags="0" 396device snc 397hint.snc.0.at="isa" 398hint.snc.0.port="0x888" 399hint.snc.0.irq="6" 400hint.snc.0.maddr="0xc0000" 401device sr 402device oltr 403 404# 405# SCSI host adapters: 406# 407# ct: WD33C93[ABC] based SCSI host adapters. 408# ncv: NCR 53C500 based SCSI host adapters. 409# nsp: Workbit Ninja SCSI-3 based PC Card SCSI host adapters. 410# stg: TMC 18C30, 18C50 based SCSI host adapters. 411 412device ct 413hint.ct.0.at="isa" 414device ncv 415device nsp 416device stg 417 418# 419# SafeNet crypto driver: can be moved to the MI NOTES as soon as 420# it's tested on a big-endian machine 421# 422device safe # SafeNet 1141 423options SAFE_DEBUG # enable debugging support: hw.safe.debug 424options SAFE_RNDTEST # enable rndtest support 425 426##################################################################### 427 428# 429# Miscellaneous hardware: 430# 431# apm: Laptop Advanced Power Management (experimental) 432# pmtimer: Timer device driver for power management events (APM or ACPI) 433# cy: Cyclades serial driver 434# digi: Digiboard driver 435 436# Notes on APM 437# The flags takes the following meaning for apm0: 438# 0x0020 Statclock is broken. 439 440device apm 441hint.apm.0.flags="0x20" 442device canbus 443device canbepm 444device cy 445options CY_PCI_FASTINTR # Use with cy_pci unless irq is shared 446device digi 447# BIOS & FEP/OS components of device digi. 448device digi_CX 449device digi_CX_PCI 450device digi_EPCX 451device digi_EPCX_PCI 452device digi_Xe 453device digi_Xem 454device digi_Xr 455device olpt 456hint.olpt.0.at="isa" 457hint.olpt.0.port="0x040" 458device pmc 459hint.pmc.0.at="isa" 460hint.pmc.0.port="0x8f0" 461device pmtimer # Adjust system timer at wakeup time 462 463# 464# Laptop/Notebook options: 465# 466# See also: 467# apm under `Miscellaneous hardware' 468# above. 469 470# For older notebooks that signal a powerfail condition (external 471# power supply dropped, or battery state low) by issuing an NMI: 472 473options POWERFAIL_NMI # make it beep instead of panicing 474 475#--------------------------------------------------------------------------- 476# ISDN4BSD 477# 478# See /usr/share/examples/isdn/ROADMAP for an introduction to isdn4bsd. 479# 480# i4b passive ISDN cards support contains the following hardware drivers: 481# 482# isic - Siemens/Infineon ISDN ISAC/HSCX/IPAC chipset driver 483# iwic - Winbond W6692 PCI bus ISDN S/T interface controller 484# ifpi - AVM Fritz!Card PCI driver 485# ifpi2 - AVM Fritz!Card PCI version 2 driver 486# ihfc - Cologne Chip HFC ISA/ISA-PnP chipset driver 487# ifpnp - AVM Fritz!Card PnP driver 488# itjc - Siemens ISAC / TJNet Tiger300/320 chipset 489# 490# i4b active ISDN cards support contains the following hardware drivers: 491# 492# iavc - AVM B1 PCI, AVM B1 ISA, AVM T1 493# 494# Note that the ``options'' (if given) and ``device'' lines must BOTH 495# be uncommented to enable support for a given card ! 496# 497# In addition to a hardware driver (and probably an option) the mandatory 498# ISDN protocol stack devices and the mandatory support device must be 499# enabled as well as one or more devices from the optional devices section. 500# 501#--------------------------------------------------------------------------- 502# isic driver (Siemens/Infineon chipsets) 503# 504device isic 505# 506# PCI bus Cards: 507# -------------- 508# 509# ELSA MicroLink ISDN/PCI (same as ELSA QuickStep 1000pro PCI) 510options ELSA_QS1PCI 511# 512#--------------------------------------------------------------------------- 513# ifpnp driver for AVM Fritz!Card PnP 514# 515# AVM Fritz!Card PnP 516device ifpnp 517# 518#--------------------------------------------------------------------------- 519# ihfc driver for Cologne Chip ISA chipsets (experimental!) 520# 521# Teles 16.3c ISA PnP 522# AcerISDN P10 ISA PnP 523# TELEINT ISDN SPEED No.1 524device ihfc 525# 526#--------------------------------------------------------------------------- 527# ifpi driver for AVM Fritz!Card PCI 528# 529# AVM Fritz!Card PCI 530device ifpi 531# 532#--------------------------------------------------------------------------- 533# ifpi2 driver for AVM Fritz!Card PCI version 2 534# 535# AVM Fritz!Card PCI version 2 536device ifpi2 537# 538#--------------------------------------------------------------------------- 539# iwic driver for Winbond W6692 chipset 540# 541# ASUSCOM P-IN100-ST-D (and other Winbond W6692 based cards) 542device iwic 543# 544#--------------------------------------------------------------------------- 545# itjc driver for Siemens ISAC / TJNet Tiger300/320 chipset 546# 547# Traverse Technologies NETjet-S 548# Teles PCI-TJ 549device itjc 550# 551#--------------------------------------------------------------------------- 552# iavc driver (AVM active cards, needs i4bcapi driver!) 553# 554device iavc 555# 556#--------------------------------------------------------------------------- 557# ISDN Protocol Stack - mandatory for all hardware drivers 558# 559# Q.921 / layer 2 - i4b passive cards D channel handling 560device i4bq921 561# 562# Q.931 / layer 3 - i4b passive cards D channel handling 563device i4bq931 564# 565# layer 4 - i4b common passive and active card handling 566device i4b 567# 568#--------------------------------------------------------------------------- 569# ISDN devices - mandatory for all hardware drivers 570# 571# userland driver to do ISDN tracing (for passive cards only) 572device i4btrc 573options NI4BTRC=4 574# 575# userland driver to control the whole thing 576device i4bctl 577# 578#--------------------------------------------------------------------------- 579# ISDN devices - optional 580# 581# userland driver for access to raw B channel 582device i4brbch 583options NI4BRBCH=4 584# 585# userland driver for telephony 586device i4btel 587options NI4BTEL=2 588# 589# network driver for IP over raw HDLC ISDN 590device i4bipr 591options NI4BIPR=4 592# enable VJ header compression detection for ipr i/f 593options IPR_VJ 594# enable logging of the first n IP packets to isdnd (n=32 here) 595options IPR_LOG=32 596# 597# network driver for sync PPP over ISDN; requires an equivalent 598# number of sppp device to be configured 599device i4bisppp 600options NI4BISPPP=4 601# 602# B-channel interface to the netgraph subsystem 603device i4bing 604options NI4BING=2 605# 606# CAPI driver needed for active ISDN cards (see iavc driver above) 607device i4bcapi 608# 609#--------------------------------------------------------------------------- 610 611# 612# Set the number of PV entries per process. Increasing this can 613# stop panics related to heavy use of shared memory. However, that can 614# (combined with large amounts of physical memory) cause panics at 615# boot time due the kernel running out of VM space. 616# 617# If you're tweaking this, you might also want to increase the sysctls 618# "vm.v_free_min", "vm.v_free_reserved", and "vm.v_free_target". 619# 620# The value below is the one more than the default. 621# 622options PMAP_SHPGPERPROC=201 623 624# 625# Change the size of the kernel virtual address space. Due to 626# constraints in loader(8) on i386, this must be a multiple of 4. 627# 256 = 1 GB of kernel address space. Increasing this also causes 628# a reduction of the address space in user processes. 512 splits 629# the 4GB cpu address space in half (2GB user, 2GB kernel). 630# 631options KVA_PAGES=260 632 633 634##################################################################### 635# ABI Emulation 636 637# Enable iBCS2 runtime support for SCO and ISC binaries 638options IBCS2 639 640# Emulate spx device for client side of SVR3 local X interface 641options SPX_HACK 642 643# Enable Linux ABI emulation 644options COMPAT_LINUX 645 646# Enable i386 a.out binary support 647options COMPAT_AOUT 648 649# Enable the linux-like proc filesystem support (requires COMPAT_LINUX 650# and PSEUDOFS) 651options LINPROCFS 652 653# 654# SysVR4 ABI emulation 655# 656# The svr4 ABI emulator can be statically compiled into the kernel or loaded as 657# a KLD module. 658# The STREAMS network emulation code can also be compiled statically or as a 659# module. If loaded as a module, it must be loaded before the svr4 module 660# (the /usr/sbin/svr4 script does this for you). If compiling statically, 661# the `streams' device must be configured into any kernel which also 662# specifies COMPAT_SVR4. It is possible to have a statically-configured 663# STREAMS device and a dynamically loadable svr4 emulator; the /usr/sbin/svr4 664# script understands that it doesn't need to load the `streams' module under 665# those circumstances. 666# Caveat: At this time, `options KTRACE' is required for the svr4 emulator 667# (whether static or dynamic). 668# 669options COMPAT_SVR4 # build emulator statically 670options DEBUG_SVR4 # enable verbose debugging 671device streams # STREAMS network driver (required for svr4). 672 673 674##################################################################### 675# VM OPTIONS 676 677# Disable the 4 MByte page PSE CPU feature. The PSE feature allows the 678# kernel to use 4 MByte pages to map the kernel instead of 4k pages. 679# This saves on the amount of memory needed for page tables needed to 680# map the kernel. You should only disable this feature as a temporary 681# workaround if you are having problems with it enabled. 682# 683#options DISABLE_PSE 684 685# Disable the global pages PGE CPU feature. The PGE feature allows pages 686# to be marked with the PG_G bit. TLB entries for these pages are not 687# flushed from the cache when %cr3 is reloaded. This can make context 688# switches less expensive. You should only disable this feature as a 689# temporary workaround if you are having problems with it enabled. 690# 691#options DISABLE_PG_G 692 693# KSTACK_PAGES is the number of memory pages to assign to the kernel 694# stack of each thread. 695 696options KSTACK_PAGES=3 697 698##################################################################### 699 700# More undocumented options for linting. 701# Note that documenting these are not considered an affront. 702 703options FB_INSTALL_CDEV # install a CDEV entry in /dev 704 705# PECOFF module (Win32 Execution Format) 706options PECOFF_SUPPORT 707options PECOFF_DEBUG 708 709options I4B_SMP_WORKAROUND 710options I586_PMC_GUPROF=0x70000 711options KBDIO_DEBUG=2 712options KBD_MAXRETRY=4 713options KBD_MAXWAIT=6 714options KBD_RESETDELAY=201 715 716options TIMER_FREQ=((14318182+6)/12) 717 718options VM_KMEM_SIZE 719options VM_KMEM_SIZE_MAX 720options VM_KMEM_SIZE_SCALE 721 722 723# The I/O device 724device io 725 726 727##################################################################### 728# Devices we don't want to deal with 729 730nodevice atkbdc 731nodevice atkbd 732nodevice psm 733nodevice vga 734nodevice bt 735nodevice adw 736nodevice aha 737nodevice ahb 738nodevice ahd 739nodevice mpt 740nodevice trm 741nodevice wds 742nodevice dpt 743nodevice ciss 744nodevice iir 745nodevice mly 746nodevice ida # Compaq Smart RAID 747nodevice mlx # Mylex DAC960 748nodevice amr # AMI MegaRAID 749nodevice twe # 3ware ATA RAID 750nodevice ataraid 751nodevice cm 752nodevice ex 753nodevice fea 754nodevice intpm 755nodevice alpm 756nodevice ichsmb 757nodevice viapm 758nodevice amdpm 759nodevice amdsmb 760nodevice nfpm 761nodevice nfsmb 762 763 764##################################################################### 765# Options we don't want to deal with 766 767nooption VGA_DEBUG 768nooption VGA_WIDTH90 769nooption VGA_SLOW_IOACCESS 770nooption VGA_ALT_SEQACCESS 771nooption PSM_RESETAFTERSUSPEND 772nooption PSM_HOOKRESUME 773nooption ATKBD_DFLT_KEYMAP 774nooption AHD_DEBUG 775nooption AHD_DEBUG_OPTS 776nooption AHD_REG_PRETTY_PRINT 777nooption ADW_ALLOW_MEMIO 778nooption DPT_LOST_IRQ 779nooption DPT_RESET_HBA 780nooption DPT_TIMEOUT_FACTOR 781nooption AAC_DEBUG 782nooption ACPI_MAX_THREADS 783 784 785##################################################################### 786# Make options we don't want to deal with 787 788nomakeoption ATKBD_DFLT_KEYMAP 789