sctp.h revision 269436
1/*- 2 * Copyright (c) 2001-2008, by Cisco Systems, Inc. All rights reserved. 3 * Copyright (c) 2008-2012, by Randall Stewart. All rights reserved. 4 * Copyright (c) 2008-2012, by Michael Tuexen. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions are met: 8 * 9 * a) Redistributions of source code must retain the above copyright notice, 10 * this list of conditions and the following disclaimer. 11 * 12 * b) Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in 14 * the documentation and/or other materials provided with the distribution. 15 * 16 * c) Neither the name of Cisco Systems, Inc. nor the names of its 17 * contributors may be used to endorse or promote products derived 18 * from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 22 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 24 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33#include <sys/cdefs.h> 34__FBSDID("$FreeBSD: head/sys/netinet/sctp.h 269436 2014-08-02 17:35:13Z tuexen $"); 35 36#ifndef _NETINET_SCTP_H_ 37#define _NETINET_SCTP_H_ 38 39 40#include <sys/types.h> 41 42 43#define SCTP_PACKED __attribute__((packed)) 44 45/* 46 * SCTP protocol - RFC4960. 47 */ 48struct sctphdr { 49 uint16_t src_port; /* source port */ 50 uint16_t dest_port; /* destination port */ 51 uint32_t v_tag; /* verification tag of packet */ 52 uint32_t checksum; /* CRC32C checksum */ 53 /* chunks follow... */ 54} SCTP_PACKED; 55 56/* 57 * SCTP Chunks 58 */ 59struct sctp_chunkhdr { 60 uint8_t chunk_type; /* chunk type */ 61 uint8_t chunk_flags; /* chunk flags */ 62 uint16_t chunk_length; /* chunk length */ 63 /* optional params follow */ 64} SCTP_PACKED; 65 66/* 67 * SCTP chunk parameters 68 */ 69struct sctp_paramhdr { 70 uint16_t param_type; /* parameter type */ 71 uint16_t param_length; /* parameter length */ 72} SCTP_PACKED; 73 74/* 75 * user socket options: socket API defined 76 */ 77/* 78 * read-write options 79 */ 80#define SCTP_RTOINFO 0x00000001 81#define SCTP_ASSOCINFO 0x00000002 82#define SCTP_INITMSG 0x00000003 83#define SCTP_NODELAY 0x00000004 84#define SCTP_AUTOCLOSE 0x00000005 85#define SCTP_SET_PEER_PRIMARY_ADDR 0x00000006 86#define SCTP_PRIMARY_ADDR 0x00000007 87#define SCTP_ADAPTATION_LAYER 0x00000008 88/* same as above */ 89#define SCTP_ADAPTION_LAYER 0x00000008 90#define SCTP_DISABLE_FRAGMENTS 0x00000009 91#define SCTP_PEER_ADDR_PARAMS 0x0000000a 92#define SCTP_DEFAULT_SEND_PARAM 0x0000000b 93/* ancillary data/notification interest options */ 94#define SCTP_EVENTS 0x0000000c /* deprecated */ 95/* Without this applied we will give V4 and V6 addresses on a V6 socket */ 96#define SCTP_I_WANT_MAPPED_V4_ADDR 0x0000000d 97#define SCTP_MAXSEG 0x0000000e 98#define SCTP_DELAYED_SACK 0x0000000f 99#define SCTP_FRAGMENT_INTERLEAVE 0x00000010 100#define SCTP_PARTIAL_DELIVERY_POINT 0x00000011 101/* authentication support */ 102#define SCTP_AUTH_CHUNK 0x00000012 103#define SCTP_AUTH_KEY 0x00000013 104#define SCTP_HMAC_IDENT 0x00000014 105#define SCTP_AUTH_ACTIVE_KEY 0x00000015 106#define SCTP_AUTH_DELETE_KEY 0x00000016 107#define SCTP_USE_EXT_RCVINFO 0x00000017 108#define SCTP_AUTO_ASCONF 0x00000018 /* rw */ 109#define SCTP_MAXBURST 0x00000019 /* rw */ 110#define SCTP_MAX_BURST 0x00000019 /* rw */ 111/* assoc level context */ 112#define SCTP_CONTEXT 0x0000001a /* rw */ 113/* explicit EOR signalling */ 114#define SCTP_EXPLICIT_EOR 0x0000001b 115#define SCTP_REUSE_PORT 0x0000001c /* rw */ 116#define SCTP_AUTH_DEACTIVATE_KEY 0x0000001d 117#define SCTP_EVENT 0x0000001e 118#define SCTP_RECVRCVINFO 0x0000001f 119#define SCTP_RECVNXTINFO 0x00000020 120#define SCTP_DEFAULT_SNDINFO 0x00000021 121#define SCTP_DEFAULT_PRINFO 0x00000022 122#define SCTP_PEER_ADDR_THLDS 0x00000023 123#define SCTP_REMOTE_UDP_ENCAPS_PORT 0x00000024 124#define SCTP_ECN_SUPPORTED 0x00000025 125 126/* 127 * read-only options 128 */ 129#define SCTP_STATUS 0x00000100 130#define SCTP_GET_PEER_ADDR_INFO 0x00000101 131/* authentication support */ 132#define SCTP_PEER_AUTH_CHUNKS 0x00000102 133#define SCTP_LOCAL_AUTH_CHUNKS 0x00000103 134#define SCTP_GET_ASSOC_NUMBER 0x00000104 /* ro */ 135#define SCTP_GET_ASSOC_ID_LIST 0x00000105 /* ro */ 136#define SCTP_TIMEOUTS 0x00000106 137 138/* 139 * user socket options: BSD implementation specific 140 */ 141/* 142 * Blocking I/O is enabled on any TCP type socket by default. For the UDP 143 * model if this is turned on then the socket buffer is shared for send 144 * resources amongst all associations. The default for the UDP model is that 145 * is SS_NBIO is set. Which means all associations have a separate send 146 * limit BUT they will NOT ever BLOCK instead you will get an error back 147 * EAGAIN if you try to send too much. If you want the blocking semantics you 148 * set this option at the cost of sharing one socket send buffer size amongst 149 * all associations. Peeled off sockets turn this option off and block. But 150 * since both TCP and peeled off sockets have only one assoc per socket this 151 * is fine. It probably does NOT make sense to set this on SS_NBIO on a TCP 152 * model OR peeled off UDP model, but we do allow you to do so. You just use 153 * the normal syscall to toggle SS_NBIO the way you want. 154 * 155 * Blocking I/O is controlled by the SS_NBIO flag on the socket state so_state 156 * field. 157 */ 158 159#define SCTP_ENABLE_STREAM_RESET 0x00000900 /* struct 160 * sctp_assoc_value */ 161#define SCTP_RESET_STREAMS 0x00000901 /* struct 162 * sctp_reset_streams */ 163#define SCTP_RESET_ASSOC 0x00000902 /* sctp_assoc_t */ 164#define SCTP_ADD_STREAMS 0x00000903 /* struct 165 * sctp_add_streams */ 166 167/* For enable stream reset */ 168#define SCTP_ENABLE_RESET_STREAM_REQ 0x00000001 169#define SCTP_ENABLE_RESET_ASSOC_REQ 0x00000002 170#define SCTP_ENABLE_CHANGE_ASSOC_REQ 0x00000004 171#define SCTP_ENABLE_VALUE_MASK 0x00000007 172/* For reset streams */ 173#define SCTP_STREAM_RESET_INCOMING 0x00000001 174#define SCTP_STREAM_RESET_OUTGOING 0x00000002 175 176 177/* here on down are more implementation specific */ 178#define SCTP_SET_DEBUG_LEVEL 0x00001005 179#define SCTP_CLR_STAT_LOG 0x00001007 180/* CMT ON/OFF socket option */ 181#define SCTP_CMT_ON_OFF 0x00001200 182#define SCTP_CMT_USE_DAC 0x00001201 183/* JRS - Pluggable Congestion Control Socket option */ 184#define SCTP_PLUGGABLE_CC 0x00001202 185/* RS - Pluggable Stream Scheduling Socket option */ 186#define SCTP_PLUGGABLE_SS 0x00001203 187#define SCTP_SS_VALUE 0x00001204 188#define SCTP_CC_OPTION 0x00001205 /* Options for CC 189 * modules */ 190/* read only */ 191#define SCTP_GET_SNDBUF_USE 0x00001101 192#define SCTP_GET_STAT_LOG 0x00001103 193#define SCTP_PCB_STATUS 0x00001104 194#define SCTP_GET_NONCE_VALUES 0x00001105 195 196 197/* Special hook for dynamically setting primary for all assoc's, 198 * this is a write only option that requires root privilege. 199 */ 200#define SCTP_SET_DYNAMIC_PRIMARY 0x00002001 201 202/* VRF (virtual router feature) and multi-VRF support 203 * options. VRF's provide splits within a router 204 * that give the views of multiple routers. A 205 * standard host, without VRF support, is just 206 * a single VRF. If VRF's are supported then 207 * the transport must be VRF aware. This means 208 * that every socket call coming in must be directed 209 * within the endpoint to one of the VRF's it belongs 210 * to. The endpoint, before binding, may select 211 * the "default" VRF it is in by using a set socket 212 * option with SCTP_VRF_ID. This will also 213 * get propagated to the default VRF. Once the 214 * endpoint binds an address then it CANNOT add 215 * additional VRF's to become a Multi-VRF endpoint. 216 * 217 * Before BINDING additional VRF's can be added with 218 * the SCTP_ADD_VRF_ID call or deleted with 219 * SCTP_DEL_VRF_ID. 220 * 221 * Associations are ALWAYS contained inside a single 222 * VRF. They cannot reside in two (or more) VRF's. Incoming 223 * packets, assuming the router is VRF aware, can always 224 * tell us what VRF they arrived on. A host not supporting 225 * any VRF's will find that the packets always arrived on the 226 * single VRF that the host has. 227 * 228 */ 229 230#define SCTP_VRF_ID 0x00003001 231#define SCTP_ADD_VRF_ID 0x00003002 232#define SCTP_GET_VRF_IDS 0x00003003 233#define SCTP_GET_ASOC_VRF 0x00003004 234#define SCTP_DEL_VRF_ID 0x00003005 235 236/* 237 * If you enable packet logging you can get 238 * a poor mans ethereal output in binary 239 * form. Note this is a compile option to 240 * the kernel, SCTP_PACKET_LOGGING, and 241 * without it in your kernel you 242 * will get a EOPNOTSUPP 243 */ 244#define SCTP_GET_PACKET_LOG 0x00004001 245 246/* 247 * hidden implementation specific options these are NOT user visible (should 248 * move out of sctp.h) 249 */ 250/* sctp_bindx() flags as hidden socket options */ 251#define SCTP_BINDX_ADD_ADDR 0x00008001 252#define SCTP_BINDX_REM_ADDR 0x00008002 253/* Hidden socket option that gets the addresses */ 254#define SCTP_GET_PEER_ADDRESSES 0x00008003 255#define SCTP_GET_LOCAL_ADDRESSES 0x00008004 256/* return the total count in bytes needed to hold all local addresses bound */ 257#define SCTP_GET_LOCAL_ADDR_SIZE 0x00008005 258/* Return the total count in bytes needed to hold the remote address */ 259#define SCTP_GET_REMOTE_ADDR_SIZE 0x00008006 260/* hidden option for connectx */ 261#define SCTP_CONNECT_X 0x00008007 262/* hidden option for connectx_delayed, part of sendx */ 263#define SCTP_CONNECT_X_DELAYED 0x00008008 264#define SCTP_CONNECT_X_COMPLETE 0x00008009 265/* hidden socket option based sctp_peeloff */ 266#define SCTP_PEELOFF 0x0000800a 267/* the real worker for sctp_getaddrlen() */ 268#define SCTP_GET_ADDR_LEN 0x0000800b 269/* Debug things that need to be purged */ 270#define SCTP_SET_INITIAL_DBG_SEQ 0x00009f00 271 272/* JRS - Supported congestion control modules for pluggable 273 * congestion control 274 */ 275/* Standard TCP Congestion Control */ 276#define SCTP_CC_RFC2581 0x00000000 277/* High Speed TCP Congestion Control (Floyd) */ 278#define SCTP_CC_HSTCP 0x00000001 279/* HTCP Congestion Control */ 280#define SCTP_CC_HTCP 0x00000002 281/* RTCC Congestion Control - RFC2581 plus */ 282#define SCTP_CC_RTCC 0x00000003 283 284#define SCTP_CC_OPT_RTCC_SETMODE 0x00002000 285#define SCTP_CC_OPT_USE_DCCC_ECN 0x00002001 286#define SCTP_CC_OPT_STEADY_STEP 0x00002002 287 288#define SCTP_CMT_OFF 0 289#define SCTP_CMT_BASE 1 290#define SCTP_CMT_RPV1 2 291#define SCTP_CMT_RPV2 3 292#define SCTP_CMT_MPTCP 4 293#define SCTP_CMT_MAX SCTP_CMT_MPTCP 294 295/* RS - Supported stream scheduling modules for pluggable 296 * stream scheduling 297 */ 298/* Default simple round-robin */ 299#define SCTP_SS_DEFAULT 0x00000000 300/* Real round-robin */ 301#define SCTP_SS_ROUND_ROBIN 0x00000001 302/* Real round-robin per packet */ 303#define SCTP_SS_ROUND_ROBIN_PACKET 0x00000002 304/* Priority */ 305#define SCTP_SS_PRIORITY 0x00000003 306/* Fair Bandwidth */ 307#define SCTP_SS_FAIR_BANDWITH 0x00000004 308/* First-come, first-serve */ 309#define SCTP_SS_FIRST_COME 0x00000005 310 311 312/* fragment interleave constants 313 * setting must be one of these or 314 * EINVAL returned. 315 */ 316#define SCTP_FRAG_LEVEL_0 0x00000000 317#define SCTP_FRAG_LEVEL_1 0x00000001 318#define SCTP_FRAG_LEVEL_2 0x00000002 319 320/* 321 * user state values 322 */ 323#define SCTP_CLOSED 0x0000 324#define SCTP_BOUND 0x1000 325#define SCTP_LISTEN 0x2000 326#define SCTP_COOKIE_WAIT 0x0002 327#define SCTP_COOKIE_ECHOED 0x0004 328#define SCTP_ESTABLISHED 0x0008 329#define SCTP_SHUTDOWN_SENT 0x0010 330#define SCTP_SHUTDOWN_RECEIVED 0x0020 331#define SCTP_SHUTDOWN_ACK_SENT 0x0040 332#define SCTP_SHUTDOWN_PENDING 0x0080 333 334/* 335 * SCTP operational error codes (user visible) 336 */ 337#define SCTP_CAUSE_NO_ERROR 0x0000 338#define SCTP_CAUSE_INVALID_STREAM 0x0001 339#define SCTP_CAUSE_MISSING_PARAM 0x0002 340#define SCTP_CAUSE_STALE_COOKIE 0x0003 341#define SCTP_CAUSE_OUT_OF_RESC 0x0004 342#define SCTP_CAUSE_UNRESOLVABLE_ADDR 0x0005 343#define SCTP_CAUSE_UNRECOG_CHUNK 0x0006 344#define SCTP_CAUSE_INVALID_PARAM 0x0007 345#define SCTP_CAUSE_UNRECOG_PARAM 0x0008 346#define SCTP_CAUSE_NO_USER_DATA 0x0009 347#define SCTP_CAUSE_COOKIE_IN_SHUTDOWN 0x000a 348#define SCTP_CAUSE_RESTART_W_NEWADDR 0x000b 349#define SCTP_CAUSE_USER_INITIATED_ABT 0x000c 350#define SCTP_CAUSE_PROTOCOL_VIOLATION 0x000d 351 352/* Error causes from RFC5061 */ 353#define SCTP_CAUSE_DELETING_LAST_ADDR 0x00a0 354#define SCTP_CAUSE_RESOURCE_SHORTAGE 0x00a1 355#define SCTP_CAUSE_DELETING_SRC_ADDR 0x00a2 356#define SCTP_CAUSE_ILLEGAL_ASCONF_ACK 0x00a3 357#define SCTP_CAUSE_REQUEST_REFUSED 0x00a4 358 359/* Error causes from nat-draft */ 360#define SCTP_CAUSE_NAT_COLLIDING_STATE 0x00b0 361#define SCTP_CAUSE_NAT_MISSING_STATE 0x00b1 362 363/* Error causes from RFC4895 */ 364#define SCTP_CAUSE_UNSUPPORTED_HMACID 0x0105 365 366/* 367 * error cause parameters (user visible) 368 */ 369struct sctp_gen_error_cause { 370 uint16_t code; 371 uint16_t length; 372 uint8_t info[]; 373} SCTP_PACKED; 374 375struct sctp_error_cause { 376 uint16_t code; 377 uint16_t length; 378 /* optional cause-specific info may follow */ 379} SCTP_PACKED; 380 381struct sctp_error_invalid_stream { 382 struct sctp_error_cause cause; /* code=SCTP_ERROR_INVALID_STREAM */ 383 uint16_t stream_id; /* stream id of the DATA in error */ 384 uint16_t reserved; 385} SCTP_PACKED; 386 387struct sctp_error_missing_param { 388 struct sctp_error_cause cause; /* code=SCTP_ERROR_MISSING_PARAM */ 389 uint32_t num_missing_params; /* number of missing parameters */ 390 /* uint16_t param_type's follow */ 391} SCTP_PACKED; 392 393struct sctp_error_stale_cookie { 394 struct sctp_error_cause cause; /* code=SCTP_ERROR_STALE_COOKIE */ 395 uint32_t stale_time; /* time in usec of staleness */ 396} SCTP_PACKED; 397 398struct sctp_error_out_of_resource { 399 struct sctp_error_cause cause; /* code=SCTP_ERROR_OUT_OF_RESOURCES */ 400} SCTP_PACKED; 401 402struct sctp_error_unresolv_addr { 403 struct sctp_error_cause cause; /* code=SCTP_ERROR_UNRESOLVABLE_ADDR */ 404 405} SCTP_PACKED; 406 407struct sctp_error_unrecognized_chunk { 408 struct sctp_error_cause cause; /* code=SCTP_ERROR_UNRECOG_CHUNK */ 409 struct sctp_chunkhdr ch;/* header from chunk in error */ 410} SCTP_PACKED; 411 412struct sctp_error_no_user_data { 413 struct sctp_error_cause cause; /* code=SCTP_CAUSE_NO_USER_DATA */ 414 uint32_t tsn; /* TSN of the empty data chunk */ 415} SCTP_PACKED; 416 417/* 418 * Main SCTP chunk types we place these here so natd and f/w's in user land 419 * can find them. 420 */ 421/************0x00 series ***********/ 422#define SCTP_DATA 0x00 423#define SCTP_INITIATION 0x01 424#define SCTP_INITIATION_ACK 0x02 425#define SCTP_SELECTIVE_ACK 0x03 426#define SCTP_HEARTBEAT_REQUEST 0x04 427#define SCTP_HEARTBEAT_ACK 0x05 428#define SCTP_ABORT_ASSOCIATION 0x06 429#define SCTP_SHUTDOWN 0x07 430#define SCTP_SHUTDOWN_ACK 0x08 431#define SCTP_OPERATION_ERROR 0x09 432#define SCTP_COOKIE_ECHO 0x0a 433#define SCTP_COOKIE_ACK 0x0b 434#define SCTP_ECN_ECHO 0x0c 435#define SCTP_ECN_CWR 0x0d 436#define SCTP_SHUTDOWN_COMPLETE 0x0e 437/* RFC4895 */ 438#define SCTP_AUTHENTICATION 0x0f 439/* EY nr_sack chunk id*/ 440#define SCTP_NR_SELECTIVE_ACK 0x10 441/************0x40 series ***********/ 442/************0x80 series ***********/ 443/* RFC5061 */ 444#define SCTP_ASCONF_ACK 0x80 445/* draft-ietf-stewart-pktdrpsctp */ 446#define SCTP_PACKET_DROPPED 0x81 447/* draft-ietf-stewart-strreset-xxx */ 448#define SCTP_STREAM_RESET 0x82 449 450/* RFC4820 */ 451#define SCTP_PAD_CHUNK 0x84 452/************0xc0 series ***********/ 453/* RFC3758 */ 454#define SCTP_FORWARD_CUM_TSN 0xc0 455/* RFC5061 */ 456#define SCTP_ASCONF 0xc1 457 458 459/* ABORT and SHUTDOWN COMPLETE FLAG */ 460#define SCTP_HAD_NO_TCB 0x01 461 462/* Packet dropped flags */ 463#define SCTP_FROM_MIDDLE_BOX SCTP_HAD_NO_TCB 464#define SCTP_BADCRC 0x02 465#define SCTP_PACKET_TRUNCATED 0x04 466 467/* Flag for ECN -CWR */ 468#define SCTP_CWR_REDUCE_OVERRIDE 0x01 469#define SCTP_CWR_IN_SAME_WINDOW 0x02 470 471#define SCTP_SAT_NETWORK_MIN 400 /* min ms for RTT to set satellite 472 * time */ 473#define SCTP_SAT_NETWORK_BURST_INCR 2 /* how many times to multiply maxburst 474 * in sat */ 475 476/* Data Chuck Specific Flags */ 477#define SCTP_DATA_FRAG_MASK 0x03 478#define SCTP_DATA_MIDDLE_FRAG 0x00 479#define SCTP_DATA_LAST_FRAG 0x01 480#define SCTP_DATA_FIRST_FRAG 0x02 481#define SCTP_DATA_NOT_FRAG 0x03 482#define SCTP_DATA_UNORDERED 0x04 483#define SCTP_DATA_SACK_IMMEDIATELY 0x08 484/* ECN Nonce: SACK Chunk Specific Flags */ 485#define SCTP_SACK_NONCE_SUM 0x01 486 487/* CMT DAC algorithm SACK flag */ 488#define SCTP_SACK_CMT_DAC 0x80 489 490/* 491 * PCB flags (in sctp_flags bitmask). 492 * Note the features and flags are meant 493 * for use by netstat. 494 */ 495#define SCTP_PCB_FLAGS_UDPTYPE 0x00000001 496#define SCTP_PCB_FLAGS_TCPTYPE 0x00000002 497#define SCTP_PCB_FLAGS_BOUNDALL 0x00000004 498#define SCTP_PCB_FLAGS_ACCEPTING 0x00000008 499#define SCTP_PCB_FLAGS_UNBOUND 0x00000010 500#define SCTP_PCB_FLAGS_CLOSE_IP 0x00040000 501#define SCTP_PCB_FLAGS_WAS_CONNECTED 0x00080000 502#define SCTP_PCB_FLAGS_WAS_ABORTED 0x00100000 503/* TCP model support */ 504 505#define SCTP_PCB_FLAGS_CONNECTED 0x00200000 506#define SCTP_PCB_FLAGS_IN_TCPPOOL 0x00400000 507#define SCTP_PCB_FLAGS_DONT_WAKE 0x00800000 508#define SCTP_PCB_FLAGS_WAKEOUTPUT 0x01000000 509#define SCTP_PCB_FLAGS_WAKEINPUT 0x02000000 510#define SCTP_PCB_FLAGS_BOUND_V6 0x04000000 511#define SCTP_PCB_FLAGS_BLOCKING_IO 0x08000000 512#define SCTP_PCB_FLAGS_SOCKET_GONE 0x10000000 513#define SCTP_PCB_FLAGS_SOCKET_ALLGONE 0x20000000 514#define SCTP_PCB_FLAGS_SOCKET_CANT_READ 0x40000000 515 516/* flags to copy to new PCB */ 517#define SCTP_PCB_COPY_FLAGS (SCTP_PCB_FLAGS_BOUNDALL|\ 518 SCTP_PCB_FLAGS_WAKEINPUT|\ 519 SCTP_PCB_FLAGS_BOUND_V6) 520 521/* 522 * PCB Features (in sctp_features bitmask) 523 */ 524#define SCTP_PCB_FLAGS_DO_NOT_PMTUD 0x0000000000000001 525#define SCTP_PCB_FLAGS_EXT_RCVINFO 0x0000000000000002 /* deprecated */ 526#define SCTP_PCB_FLAGS_DONOT_HEARTBEAT 0x0000000000000004 527#define SCTP_PCB_FLAGS_FRAG_INTERLEAVE 0x0000000000000008 528#define SCTP_PCB_FLAGS_INTERLEAVE_STRMS 0x0000000000000010 529#define SCTP_PCB_FLAGS_DO_ASCONF 0x0000000000000020 530#define SCTP_PCB_FLAGS_AUTO_ASCONF 0x0000000000000040 531#define SCTP_PCB_FLAGS_ZERO_COPY_ACTIVE 0x0000000000000080 532/* socket options */ 533#define SCTP_PCB_FLAGS_NODELAY 0x0000000000000100 534#define SCTP_PCB_FLAGS_AUTOCLOSE 0x0000000000000200 535#define SCTP_PCB_FLAGS_RECVDATAIOEVNT 0x0000000000000400 /* deprecated */ 536#define SCTP_PCB_FLAGS_RECVASSOCEVNT 0x0000000000000800 537#define SCTP_PCB_FLAGS_RECVPADDREVNT 0x0000000000001000 538#define SCTP_PCB_FLAGS_RECVPEERERR 0x0000000000002000 539#define SCTP_PCB_FLAGS_RECVSENDFAILEVNT 0x0000000000004000 /* deprecated */ 540#define SCTP_PCB_FLAGS_RECVSHUTDOWNEVNT 0x0000000000008000 541#define SCTP_PCB_FLAGS_ADAPTATIONEVNT 0x0000000000010000 542#define SCTP_PCB_FLAGS_PDAPIEVNT 0x0000000000020000 543#define SCTP_PCB_FLAGS_AUTHEVNT 0x0000000000040000 544#define SCTP_PCB_FLAGS_STREAM_RESETEVNT 0x0000000000080000 545#define SCTP_PCB_FLAGS_NO_FRAGMENT 0x0000000000100000 546#define SCTP_PCB_FLAGS_EXPLICIT_EOR 0x0000000000400000 547#define SCTP_PCB_FLAGS_NEEDS_MAPPED_V4 0x0000000000800000 548#define SCTP_PCB_FLAGS_MULTIPLE_ASCONFS 0x0000000001000000 549#define SCTP_PCB_FLAGS_PORTREUSE 0x0000000002000000 550#define SCTP_PCB_FLAGS_DRYEVNT 0x0000000004000000 551#define SCTP_PCB_FLAGS_RECVRCVINFO 0x0000000008000000 552#define SCTP_PCB_FLAGS_RECVNXTINFO 0x0000000010000000 553#define SCTP_PCB_FLAGS_ASSOC_RESETEVNT 0x0000000020000000 554#define SCTP_PCB_FLAGS_STREAM_CHANGEEVNT 0x0000000040000000 555#define SCTP_PCB_FLAGS_RECVNSENDFAILEVNT 0x0000000080000000 556 557/*- 558 * mobility_features parameters (by micchie).Note 559 * these features are applied against the 560 * sctp_mobility_features flags.. not the sctp_features 561 * flags. 562 */ 563#define SCTP_MOBILITY_BASE 0x00000001 564#define SCTP_MOBILITY_FASTHANDOFF 0x00000002 565#define SCTP_MOBILITY_PRIM_DELETED 0x00000004 566 567 568#define SCTP_SMALLEST_PMTU 512 /* smallest pmtu allowed when disabling PMTU 569 * discovery */ 570 571#undef SCTP_PACKED 572 573#include <netinet/sctp_uio.h> 574 575/* This dictates the size of the packet 576 * collection buffer. This only applies 577 * if SCTP_PACKET_LOGGING is enabled in 578 * your config. 579 */ 580#define SCTP_PACKET_LOG_SIZE 65536 581 582/* Maximum delays and such a user can set for options that 583 * take ms. 584 */ 585#define SCTP_MAX_SACK_DELAY 500 /* per RFC4960 */ 586#define SCTP_MAX_HB_INTERVAL 14400000 /* 4 hours in ms */ 587#define SCTP_MAX_COOKIE_LIFE 3600000 /* 1 hour in ms */ 588 589 590/* Types of logging/KTR tracing that can be enabled via the 591 * sysctl net.inet.sctp.sctp_logging. You must also enable 592 * SUBSYS tracing. 593 * Note that you must have the SCTP option in the kernel 594 * to enable these as well. 595 */ 596#define SCTP_BLK_LOGGING_ENABLE 0x00000001 597#define SCTP_CWND_MONITOR_ENABLE 0x00000002 598#define SCTP_CWND_LOGGING_ENABLE 0x00000004 599#define SCTP_FLIGHT_LOGGING_ENABLE 0x00000020 600#define SCTP_FR_LOGGING_ENABLE 0x00000040 601#define SCTP_LOCK_LOGGING_ENABLE 0x00000080 602#define SCTP_MAP_LOGGING_ENABLE 0x00000100 603#define SCTP_MBCNT_LOGGING_ENABLE 0x00000200 604#define SCTP_MBUF_LOGGING_ENABLE 0x00000400 605#define SCTP_NAGLE_LOGGING_ENABLE 0x00000800 606#define SCTP_RECV_RWND_LOGGING_ENABLE 0x00001000 607#define SCTP_RTTVAR_LOGGING_ENABLE 0x00002000 608#define SCTP_SACK_LOGGING_ENABLE 0x00004000 609#define SCTP_SACK_RWND_LOGGING_ENABLE 0x00008000 610#define SCTP_SB_LOGGING_ENABLE 0x00010000 611#define SCTP_STR_LOGGING_ENABLE 0x00020000 612#define SCTP_WAKE_LOGGING_ENABLE 0x00040000 613#define SCTP_LOG_MAXBURST_ENABLE 0x00080000 614#define SCTP_LOG_RWND_ENABLE 0x00100000 615#define SCTP_LOG_SACK_ARRIVALS_ENABLE 0x00200000 616#define SCTP_LTRACE_CHUNK_ENABLE 0x00400000 617#define SCTP_LTRACE_ERROR_ENABLE 0x00800000 618#define SCTP_LAST_PACKET_TRACING 0x01000000 619#define SCTP_THRESHOLD_LOGGING 0x02000000 620#define SCTP_LOG_AT_SEND_2_SCTP 0x04000000 621#define SCTP_LOG_AT_SEND_2_OUTQ 0x08000000 622#define SCTP_LOG_TRY_ADVANCE 0x10000000 623 624#endif /* !_NETINET_SCTP_H_ */ 625