sctp.h revision 223162
1/*- 2 * Copyright (c) 2001-2008, by Cisco Systems, Inc. All rights reserved. 3 * Copyright (c) 2008-2011, by Randall Stewart. All rights reserved. 4 * Copyright (c) 2008-2011, by Michael Tuexen. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions are met: 8 * 9 * a) Redistributions of source code must retain the above copyright notice, 10 * this list of conditions and the following disclaimer. 11 * 12 * b) Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in 14 * the documentation and/or other materials provided with the distribution. 15 * 16 * c) Neither the name of Cisco Systems, Inc. nor the names of its 17 * contributors may be used to endorse or promote products derived 18 * from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 22 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 24 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32/* $KAME: sctp.h,v 1.18 2005/03/06 16:04:16 itojun Exp $ */ 33 34#include <sys/cdefs.h> 35__FBSDID("$FreeBSD: head/sys/netinet/sctp.h 223162 2011-06-16 21:12:36Z tuexen $"); 36 37#ifndef _NETINET_SCTP_H_ 38#define _NETINET_SCTP_H_ 39 40#include <sys/types.h> 41 42 43#define SCTP_PACKED __attribute__((packed)) 44 45/* 46 * SCTP protocol - RFC2960. 47 */ 48struct sctphdr { 49 uint16_t src_port; /* source port */ 50 uint16_t dest_port; /* destination port */ 51 uint32_t v_tag; /* verification tag of packet */ 52 uint32_t checksum; /* Adler32 C-Sum */ 53 /* chunks follow... */ 54} SCTP_PACKED; 55 56/* 57 * SCTP Chunks 58 */ 59struct sctp_chunkhdr { 60 uint8_t chunk_type; /* chunk type */ 61 uint8_t chunk_flags; /* chunk flags */ 62 uint16_t chunk_length; /* chunk length */ 63 /* optional params follow */ 64} SCTP_PACKED; 65 66/* 67 * SCTP chunk parameters 68 */ 69struct sctp_paramhdr { 70 uint16_t param_type; /* parameter type */ 71 uint16_t param_length; /* parameter length */ 72} SCTP_PACKED; 73 74/* 75 * user socket options: socket API defined 76 */ 77/* 78 * read-write options 79 */ 80#define SCTP_RTOINFO 0x00000001 81#define SCTP_ASSOCINFO 0x00000002 82#define SCTP_INITMSG 0x00000003 83#define SCTP_NODELAY 0x00000004 84#define SCTP_AUTOCLOSE 0x00000005 85#define SCTP_SET_PEER_PRIMARY_ADDR 0x00000006 86#define SCTP_PRIMARY_ADDR 0x00000007 87#define SCTP_ADAPTATION_LAYER 0x00000008 88/* same as above */ 89#define SCTP_ADAPTION_LAYER 0x00000008 90#define SCTP_DISABLE_FRAGMENTS 0x00000009 91#define SCTP_PEER_ADDR_PARAMS 0x0000000a 92#define SCTP_DEFAULT_SEND_PARAM 0x0000000b 93/* ancillary data/notification interest options */ 94#define SCTP_EVENTS 0x0000000c /* deprecated */ 95/* Without this applied we will give V4 and V6 addresses on a V6 socket */ 96#define SCTP_I_WANT_MAPPED_V4_ADDR 0x0000000d 97#define SCTP_MAXSEG 0x0000000e 98#define SCTP_DELAYED_SACK 0x0000000f 99#define SCTP_FRAGMENT_INTERLEAVE 0x00000010 100#define SCTP_PARTIAL_DELIVERY_POINT 0x00000011 101/* authentication support */ 102#define SCTP_AUTH_CHUNK 0x00000012 103#define SCTP_AUTH_KEY 0x00000013 104#define SCTP_HMAC_IDENT 0x00000014 105#define SCTP_AUTH_ACTIVE_KEY 0x00000015 106#define SCTP_AUTH_DELETE_KEY 0x00000016 107#define SCTP_USE_EXT_RCVINFO 0x00000017 108#define SCTP_AUTO_ASCONF 0x00000018 /* rw */ 109#define SCTP_MAXBURST 0x00000019 /* rw */ 110#define SCTP_MAX_BURST 0x00000019 /* rw */ 111/* assoc level context */ 112#define SCTP_CONTEXT 0x0000001a /* rw */ 113/* explicit EOR signalling */ 114#define SCTP_EXPLICIT_EOR 0x0000001b 115#define SCTP_REUSE_PORT 0x0000001c /* rw */ 116#define SCTP_AUTH_DEACTIVATE_KEY 0x0000001d 117#define SCTP_EVENT 0x0000001e 118#define SCTP_RECVRCVINFO 0x0000001f 119#define SCTP_RECVNXTINFO 0x00000020 120#define SCTP_DEFAULT_SNDINFO 0x00000021 121#define SCTP_DEFAULT_PRINFO 0x00000022 122 123/* 124 * read-only options 125 */ 126#define SCTP_STATUS 0x00000100 127#define SCTP_GET_PEER_ADDR_INFO 0x00000101 128/* authentication support */ 129#define SCTP_PEER_AUTH_CHUNKS 0x00000102 130#define SCTP_LOCAL_AUTH_CHUNKS 0x00000103 131#define SCTP_GET_ASSOC_NUMBER 0x00000104 /* ro */ 132#define SCTP_GET_ASSOC_ID_LIST 0x00000105 /* ro */ 133#define SCTP_TIMEOUTS 0x00000106 134 135/* 136 * user socket options: BSD implementation specific 137 */ 138/* 139 * Blocking I/O is enabled on any TCP type socket by default. For the UDP 140 * model if this is turned on then the socket buffer is shared for send 141 * resources amongst all associations. The default for the UDP model is that 142 * is SS_NBIO is set. Which means all associations have a separate send 143 * limit BUT they will NOT ever BLOCK instead you will get an error back 144 * EAGAIN if you try to send too much. If you want the blocking semantics you 145 * set this option at the cost of sharing one socket send buffer size amongst 146 * all associations. Peeled off sockets turn this option off and block. But 147 * since both TCP and peeled off sockets have only one assoc per socket this 148 * is fine. It probably does NOT make sense to set this on SS_NBIO on a TCP 149 * model OR peeled off UDP model, but we do allow you to do so. You just use 150 * the normal syscall to toggle SS_NBIO the way you want. 151 * 152 * Blocking I/O is controlled by the SS_NBIO flag on the socket state so_state 153 * field. 154 */ 155 156/* these should probably go into sockets API */ 157#define SCTP_RESET_STREAMS 0x00001004 /* wo */ 158 159 160/* here on down are more implementation specific */ 161#define SCTP_SET_DEBUG_LEVEL 0x00001005 162#define SCTP_CLR_STAT_LOG 0x00001007 163/* CMT ON/OFF socket option */ 164#define SCTP_CMT_ON_OFF 0x00001200 165#define SCTP_CMT_USE_DAC 0x00001201 166/* JRS - Pluggable Congestion Control Socket option */ 167#define SCTP_PLUGGABLE_CC 0x00001202 168/* RS - Pluggable Stream Scheduling Socket option */ 169#define SCTP_PLUGGABLE_SS 0x00001203 170#define SCTP_SS_VALUE 0x00001204 171#define SCTP_CC_OPTION 0x00001205 /* Options for CC 172 * modules */ 173/* read only */ 174#define SCTP_GET_SNDBUF_USE 0x00001101 175#define SCTP_GET_STAT_LOG 0x00001103 176#define SCTP_PCB_STATUS 0x00001104 177#define SCTP_GET_NONCE_VALUES 0x00001105 178 179 180/* Special hook for dynamically setting primary for all assoc's, 181 * this is a write only option that requires root privilege. 182 */ 183#define SCTP_SET_DYNAMIC_PRIMARY 0x00002001 184 185/* VRF (virtual router feature) and multi-VRF support 186 * options. VRF's provide splits within a router 187 * that give the views of multiple routers. A 188 * standard host, without VRF support, is just 189 * a single VRF. If VRF's are supported then 190 * the transport must be VRF aware. This means 191 * that every socket call coming in must be directed 192 * within the endpoint to one of the VRF's it belongs 193 * to. The endpoint, before binding, may select 194 * the "default" VRF it is in by using a set socket 195 * option with SCTP_VRF_ID. This will also 196 * get propagated to the default VRF. Once the 197 * endpoint binds an address then it CANNOT add 198 * additional VRF's to become a Multi-VRF endpoint. 199 * 200 * Before BINDING additional VRF's can be added with 201 * the SCTP_ADD_VRF_ID call or deleted with 202 * SCTP_DEL_VRF_ID. 203 * 204 * Associations are ALWAYS contained inside a single 205 * VRF. They cannot reside in two (or more) VRF's. Incoming 206 * packets, assuming the router is VRF aware, can always 207 * tell us what VRF they arrived on. A host not supporting 208 * any VRF's will find that the packets always arrived on the 209 * single VRF that the host has. 210 * 211 */ 212 213#define SCTP_VRF_ID 0x00003001 214#define SCTP_ADD_VRF_ID 0x00003002 215#define SCTP_GET_VRF_IDS 0x00003003 216#define SCTP_GET_ASOC_VRF 0x00003004 217#define SCTP_DEL_VRF_ID 0x00003005 218 219/* 220 * If you enable packet logging you can get 221 * a poor mans ethereal output in binary 222 * form. Note this is a compile option to 223 * the kernel, SCTP_PACKET_LOGGING, and 224 * without it in your kernel you 225 * will get a EOPNOTSUPP 226 */ 227#define SCTP_GET_PACKET_LOG 0x00004001 228 229/* 230 * hidden implementation specific options these are NOT user visible (should 231 * move out of sctp.h) 232 */ 233/* sctp_bindx() flags as hidden socket options */ 234#define SCTP_BINDX_ADD_ADDR 0x00008001 235#define SCTP_BINDX_REM_ADDR 0x00008002 236/* Hidden socket option that gets the addresses */ 237#define SCTP_GET_PEER_ADDRESSES 0x00008003 238#define SCTP_GET_LOCAL_ADDRESSES 0x00008004 239/* return the total count in bytes needed to hold all local addresses bound */ 240#define SCTP_GET_LOCAL_ADDR_SIZE 0x00008005 241/* Return the total count in bytes needed to hold the remote address */ 242#define SCTP_GET_REMOTE_ADDR_SIZE 0x00008006 243/* hidden option for connectx */ 244#define SCTP_CONNECT_X 0x00008007 245/* hidden option for connectx_delayed, part of sendx */ 246#define SCTP_CONNECT_X_DELAYED 0x00008008 247#define SCTP_CONNECT_X_COMPLETE 0x00008009 248/* hidden socket option based sctp_peeloff */ 249#define SCTP_PEELOFF 0x0000800a 250/* the real worker for sctp_getaddrlen() */ 251#define SCTP_GET_ADDR_LEN 0x0000800b 252/* temporary workaround for Apple listen() issue, no args used */ 253#define SCTP_LISTEN_FIX 0x0000800c 254/* Debug things that need to be purged */ 255#define SCTP_SET_INITIAL_DBG_SEQ 0x00009f00 256 257/* JRS - Supported congestion control modules for pluggable 258 * congestion control 259 */ 260/* Standard TCP Congestion Control */ 261#define SCTP_CC_RFC2581 0x00000000 262/* High Speed TCP Congestion Control (Floyd) */ 263#define SCTP_CC_HSTCP 0x00000001 264/* HTCP Congestion Control */ 265#define SCTP_CC_HTCP 0x00000002 266/* RTCC Congestion Control - RFC2581 plus */ 267#define SCTP_CC_RTCC 0x00000003 268 269#define SCTP_CC_OPT_RTCC_SETMODE 0x00002000 270#define SCTP_CC_OPT_USE_DCCC_ECN 0x00002001 271#define SCTP_CC_OPT_STEADY_STEP 0x00002002 272 273#define SCTP_CMT_OFF 0 274#define SCTP_CMT_BASE 1 275#define SCTP_CMT_RPV1 2 276#define SCTP_CMT_RPV2 3 277#define SCTP_CMT_MPTCP 4 278#define SCTP_CMT_MAX SCTP_CMT_MPTCP 279 280/* RS - Supported stream scheduling modules for pluggable 281 * stream scheduling 282 */ 283/* Default simple round-robin */ 284#define SCTP_SS_DEFAULT 0x00000000 285/* Real round-robin */ 286#define SCTP_SS_ROUND_ROBIN 0x00000001 287/* Real round-robin per packet */ 288#define SCTP_SS_ROUND_ROBIN_PACKET 0x00000002 289/* Priority */ 290#define SCTP_SS_PRIORITY 0x00000003 291/* Fair Bandwidth */ 292#define SCTP_SS_FAIR_BANDWITH 0x00000004 293/* First-come, first-serve */ 294#define SCTP_SS_FIRST_COME 0x00000005 295 296 297/* fragment interleave constants 298 * setting must be one of these or 299 * EINVAL returned. 300 */ 301#define SCTP_FRAG_LEVEL_0 0x00000000 302#define SCTP_FRAG_LEVEL_1 0x00000001 303#define SCTP_FRAG_LEVEL_2 0x00000002 304 305/* 306 * user state values 307 */ 308#define SCTP_CLOSED 0x0000 309#define SCTP_BOUND 0x1000 310#define SCTP_LISTEN 0x2000 311#define SCTP_COOKIE_WAIT 0x0002 312#define SCTP_COOKIE_ECHOED 0x0004 313#define SCTP_ESTABLISHED 0x0008 314#define SCTP_SHUTDOWN_SENT 0x0010 315#define SCTP_SHUTDOWN_RECEIVED 0x0020 316#define SCTP_SHUTDOWN_ACK_SENT 0x0040 317#define SCTP_SHUTDOWN_PENDING 0x0080 318 319/* 320 * SCTP operational error codes (user visible) 321 */ 322#define SCTP_CAUSE_NO_ERROR 0x0000 323#define SCTP_CAUSE_INVALID_STREAM 0x0001 324#define SCTP_CAUSE_MISSING_PARAM 0x0002 325#define SCTP_CAUSE_STALE_COOKIE 0x0003 326#define SCTP_CAUSE_OUT_OF_RESC 0x0004 327#define SCTP_CAUSE_UNRESOLVABLE_ADDR 0x0005 328#define SCTP_CAUSE_UNRECOG_CHUNK 0x0006 329#define SCTP_CAUSE_INVALID_PARAM 0x0007 330#define SCTP_CAUSE_UNRECOG_PARAM 0x0008 331#define SCTP_CAUSE_NO_USER_DATA 0x0009 332#define SCTP_CAUSE_COOKIE_IN_SHUTDOWN 0x000a 333#define SCTP_CAUSE_RESTART_W_NEWADDR 0x000b 334#define SCTP_CAUSE_USER_INITIATED_ABT 0x000c 335#define SCTP_CAUSE_PROTOCOL_VIOLATION 0x000d 336 337/* Error causes from RFC5061 */ 338#define SCTP_CAUSE_DELETING_LAST_ADDR 0x00a0 339#define SCTP_CAUSE_RESOURCE_SHORTAGE 0x00a1 340#define SCTP_CAUSE_DELETING_SRC_ADDR 0x00a2 341#define SCTP_CAUSE_ILLEGAL_ASCONF_ACK 0x00a3 342#define SCTP_CAUSE_REQUEST_REFUSED 0x00a4 343 344/* Error causes from nat-draft */ 345#define SCTP_CAUSE_NAT_COLLIDING_STATE 0x00b0 346#define SCTP_CAUSE_NAT_MISSING_STATE 0x00b1 347 348/* Error causes from RFC4895 */ 349#define SCTP_CAUSE_UNSUPPORTED_HMACID 0x0105 350 351/* 352 * error cause parameters (user visible) 353 */ 354struct sctp_error_cause { 355 uint16_t code; 356 uint16_t length; 357 /* optional cause-specific info may follow */ 358} SCTP_PACKED; 359 360struct sctp_error_invalid_stream { 361 struct sctp_error_cause cause; /* code=SCTP_ERROR_INVALID_STREAM */ 362 uint16_t stream_id; /* stream id of the DATA in error */ 363 uint16_t reserved; 364} SCTP_PACKED; 365 366struct sctp_error_missing_param { 367 struct sctp_error_cause cause; /* code=SCTP_ERROR_MISSING_PARAM */ 368 uint32_t num_missing_params; /* number of missing parameters */ 369 /* uint16_t param_type's follow */ 370} SCTP_PACKED; 371 372struct sctp_error_stale_cookie { 373 struct sctp_error_cause cause; /* code=SCTP_ERROR_STALE_COOKIE */ 374 uint32_t stale_time; /* time in usec of staleness */ 375} SCTP_PACKED; 376 377struct sctp_error_out_of_resource { 378 struct sctp_error_cause cause; /* code=SCTP_ERROR_OUT_OF_RESOURCES */ 379} SCTP_PACKED; 380 381struct sctp_error_unresolv_addr { 382 struct sctp_error_cause cause; /* code=SCTP_ERROR_UNRESOLVABLE_ADDR */ 383 384} SCTP_PACKED; 385 386struct sctp_error_unrecognized_chunk { 387 struct sctp_error_cause cause; /* code=SCTP_ERROR_UNRECOG_CHUNK */ 388 struct sctp_chunkhdr ch;/* header from chunk in error */ 389} SCTP_PACKED; 390 391/* 392 * Main SCTP chunk types we place these here so natd and f/w's in user land 393 * can find them. 394 */ 395/************0x00 series ***********/ 396#define SCTP_DATA 0x00 397#define SCTP_INITIATION 0x01 398#define SCTP_INITIATION_ACK 0x02 399#define SCTP_SELECTIVE_ACK 0x03 400#define SCTP_HEARTBEAT_REQUEST 0x04 401#define SCTP_HEARTBEAT_ACK 0x05 402#define SCTP_ABORT_ASSOCIATION 0x06 403#define SCTP_SHUTDOWN 0x07 404#define SCTP_SHUTDOWN_ACK 0x08 405#define SCTP_OPERATION_ERROR 0x09 406#define SCTP_COOKIE_ECHO 0x0a 407#define SCTP_COOKIE_ACK 0x0b 408#define SCTP_ECN_ECHO 0x0c 409#define SCTP_ECN_CWR 0x0d 410#define SCTP_SHUTDOWN_COMPLETE 0x0e 411/* RFC4895 */ 412#define SCTP_AUTHENTICATION 0x0f 413/* EY nr_sack chunk id*/ 414#define SCTP_NR_SELECTIVE_ACK 0x10 415/************0x40 series ***********/ 416/************0x80 series ***********/ 417/* RFC5061 */ 418#define SCTP_ASCONF_ACK 0x80 419/* draft-ietf-stewart-pktdrpsctp */ 420#define SCTP_PACKET_DROPPED 0x81 421/* draft-ietf-stewart-strreset-xxx */ 422#define SCTP_STREAM_RESET 0x82 423 424/* RFC4820 */ 425#define SCTP_PAD_CHUNK 0x84 426/************0xc0 series ***********/ 427/* RFC3758 */ 428#define SCTP_FORWARD_CUM_TSN 0xc0 429/* RFC5061 */ 430#define SCTP_ASCONF 0xc1 431 432 433/* ABORT and SHUTDOWN COMPLETE FLAG */ 434#define SCTP_HAD_NO_TCB 0x01 435 436/* Packet dropped flags */ 437#define SCTP_FROM_MIDDLE_BOX SCTP_HAD_NO_TCB 438#define SCTP_BADCRC 0x02 439#define SCTP_PACKET_TRUNCATED 0x04 440 441/* Flag for ECN -CWR */ 442#define SCTP_CWR_REDUCE_OVERRIDE 0x01 443#define SCTP_CWR_IN_SAME_WINDOW 0x02 444 445#define SCTP_SAT_NETWORK_MIN 400 /* min ms for RTT to set satellite 446 * time */ 447#define SCTP_SAT_NETWORK_BURST_INCR 2 /* how many times to multiply maxburst 448 * in sat */ 449 450/* Data Chuck Specific Flags */ 451#define SCTP_DATA_FRAG_MASK 0x03 452#define SCTP_DATA_MIDDLE_FRAG 0x00 453#define SCTP_DATA_LAST_FRAG 0x01 454#define SCTP_DATA_FIRST_FRAG 0x02 455#define SCTP_DATA_NOT_FRAG 0x03 456#define SCTP_DATA_UNORDERED 0x04 457#define SCTP_DATA_SACK_IMMEDIATELY 0x08 458/* ECN Nonce: SACK Chunk Specific Flags */ 459#define SCTP_SACK_NONCE_SUM 0x01 460 461/* CMT DAC algorithm SACK flag */ 462#define SCTP_SACK_CMT_DAC 0x80 463 464/* 465 * PCB flags (in sctp_flags bitmask). 466 * Note the features and flags are meant 467 * for use by netstat. 468 */ 469#define SCTP_PCB_FLAGS_UDPTYPE 0x00000001 470#define SCTP_PCB_FLAGS_TCPTYPE 0x00000002 471#define SCTP_PCB_FLAGS_BOUNDALL 0x00000004 472#define SCTP_PCB_FLAGS_ACCEPTING 0x00000008 473#define SCTP_PCB_FLAGS_UNBOUND 0x00000010 474#define SCTP_PCB_FLAGS_CLOSE_IP 0x00040000 475#define SCTP_PCB_FLAGS_WAS_CONNECTED 0x00080000 476#define SCTP_PCB_FLAGS_WAS_ABORTED 0x00100000 477/* TCP model support */ 478 479#define SCTP_PCB_FLAGS_CONNECTED 0x00200000 480#define SCTP_PCB_FLAGS_IN_TCPPOOL 0x00400000 481#define SCTP_PCB_FLAGS_DONT_WAKE 0x00800000 482#define SCTP_PCB_FLAGS_WAKEOUTPUT 0x01000000 483#define SCTP_PCB_FLAGS_WAKEINPUT 0x02000000 484#define SCTP_PCB_FLAGS_BOUND_V6 0x04000000 485#define SCTP_PCB_FLAGS_BLOCKING_IO 0x08000000 486#define SCTP_PCB_FLAGS_SOCKET_GONE 0x10000000 487#define SCTP_PCB_FLAGS_SOCKET_ALLGONE 0x20000000 488#define SCTP_PCB_FLAGS_SOCKET_CANT_READ 0x40000000 489/* flags to copy to new PCB */ 490#define SCTP_PCB_COPY_FLAGS (SCTP_PCB_FLAGS_BOUNDALL|\ 491 SCTP_PCB_FLAGS_WAKEINPUT|\ 492 SCTP_PCB_FLAGS_BOUND_V6) 493 494 495/* 496 * PCB Features (in sctp_features bitmask) 497 */ 498#define SCTP_PCB_FLAGS_EXT_RCVINFO 0x00000002 /* deprecated */ 499#define SCTP_PCB_FLAGS_DONOT_HEARTBEAT 0x00000004 500#define SCTP_PCB_FLAGS_FRAG_INTERLEAVE 0x00000008 501#define SCTP_PCB_FLAGS_INTERLEAVE_STRMS 0x00000010 502#define SCTP_PCB_FLAGS_DO_ASCONF 0x00000020 503#define SCTP_PCB_FLAGS_AUTO_ASCONF 0x00000040 504#define SCTP_PCB_FLAGS_ZERO_COPY_ACTIVE 0x00000080 505/* socket options */ 506#define SCTP_PCB_FLAGS_NODELAY 0x00000100 507#define SCTP_PCB_FLAGS_AUTOCLOSE 0x00000200 508#define SCTP_PCB_FLAGS_RECVDATAIOEVNT 0x00000400 /* deprecated */ 509#define SCTP_PCB_FLAGS_RECVASSOCEVNT 0x00000800 510#define SCTP_PCB_FLAGS_RECVPADDREVNT 0x00001000 511#define SCTP_PCB_FLAGS_RECVPEERERR 0x00002000 512#define SCTP_PCB_FLAGS_RECVSENDFAILEVNT 0x00004000 513#define SCTP_PCB_FLAGS_RECVSHUTDOWNEVNT 0x00008000 514#define SCTP_PCB_FLAGS_ADAPTATIONEVNT 0x00010000 515#define SCTP_PCB_FLAGS_PDAPIEVNT 0x00020000 516#define SCTP_PCB_FLAGS_AUTHEVNT 0x00040000 517#define SCTP_PCB_FLAGS_STREAM_RESETEVNT 0x00080000 518#define SCTP_PCB_FLAGS_NO_FRAGMENT 0x00100000 519#define SCTP_PCB_FLAGS_EXPLICIT_EOR 0x00400000 520#define SCTP_PCB_FLAGS_NEEDS_MAPPED_V4 0x00800000 521#define SCTP_PCB_FLAGS_MULTIPLE_ASCONFS 0x01000000 522#define SCTP_PCB_FLAGS_PORTREUSE 0x02000000 523#define SCTP_PCB_FLAGS_DRYEVNT 0x04000000 524#define SCTP_PCB_FLAGS_RECVRCVINFO 0x08000000 525#define SCTP_PCB_FLAGS_RECVNXTINFO 0x10000000 526 527/*- 528 * mobility_features parameters (by micchie).Note 529 * these features are applied against the 530 * sctp_mobility_features flags.. not the sctp_features 531 * flags. 532 */ 533#define SCTP_MOBILITY_BASE 0x00000001 534#define SCTP_MOBILITY_FASTHANDOFF 0x00000002 535#define SCTP_MOBILITY_PRIM_DELETED 0x00000004 536 537 538#define SCTP_SMALLEST_PMTU 512 /* smallest pmtu allowed when disabling PMTU 539 * discovery */ 540 541#include <netinet/sctp_uio.h> 542 543/* This dictates the size of the packet 544 * collection buffer. This only applies 545 * if SCTP_PACKET_LOGGING is enabled in 546 * your config. 547 */ 548#define SCTP_PACKET_LOG_SIZE 65536 549 550/* Maximum delays and such a user can set for options that 551 * take ms. 552 */ 553#define SCTP_MAX_SACK_DELAY 500 /* per RFC4960 */ 554#define SCTP_MAX_HB_INTERVAL 14400000 /* 4 hours in ms */ 555#define SCTP_MAX_COOKIE_LIFE 3600000 /* 1 hour in ms */ 556 557 558/* Types of logging/KTR tracing that can be enabled via the 559 * sysctl net.inet.sctp.sctp_logging. You must also enable 560 * SUBSYS tracing. 561 * Note that you must have the SCTP option in the kernel 562 * to enable these as well. 563 */ 564#define SCTP_BLK_LOGGING_ENABLE 0x00000001 565#define SCTP_CWND_MONITOR_ENABLE 0x00000002 566#define SCTP_CWND_LOGGING_ENABLE 0x00000004 567#define SCTP_EARLYFR_LOGGING_ENABLE 0x00000010 568#define SCTP_FLIGHT_LOGGING_ENABLE 0x00000020 569#define SCTP_FR_LOGGING_ENABLE 0x00000040 570#define SCTP_LOCK_LOGGING_ENABLE 0x00000080 571#define SCTP_MAP_LOGGING_ENABLE 0x00000100 572#define SCTP_MBCNT_LOGGING_ENABLE 0x00000200 573#define SCTP_MBUF_LOGGING_ENABLE 0x00000400 574#define SCTP_NAGLE_LOGGING_ENABLE 0x00000800 575#define SCTP_RECV_RWND_LOGGING_ENABLE 0x00001000 576#define SCTP_RTTVAR_LOGGING_ENABLE 0x00002000 577#define SCTP_SACK_LOGGING_ENABLE 0x00004000 578#define SCTP_SACK_RWND_LOGGING_ENABLE 0x00008000 579#define SCTP_SB_LOGGING_ENABLE 0x00010000 580#define SCTP_STR_LOGGING_ENABLE 0x00020000 581#define SCTP_WAKE_LOGGING_ENABLE 0x00040000 582#define SCTP_LOG_MAXBURST_ENABLE 0x00080000 583#define SCTP_LOG_RWND_ENABLE 0x00100000 584#define SCTP_LOG_SACK_ARRIVALS_ENABLE 0x00200000 585#define SCTP_LTRACE_CHUNK_ENABLE 0x00400000 586#define SCTP_LTRACE_ERROR_ENABLE 0x00800000 587#define SCTP_LAST_PACKET_TRACING 0x01000000 588#define SCTP_THRESHOLD_LOGGING 0x02000000 589#define SCTP_LOG_AT_SEND_2_SCTP 0x04000000 590#define SCTP_LOG_AT_SEND_2_OUTQ 0x08000000 591#define SCTP_LOG_TRY_ADVANCE 0x10000000 592 593 594#undef SCTP_PACKED 595 596#endif /* !_NETINET_SCTP_H_ */ 597