sctp.h revision 215034
1/*- 2 * Copyright (c) 2001-2008, by Cisco Systems, Inc. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions are met: 6 * 7 * a) Redistributions of source code must retain the above copyright notice, 8 * this list of conditions and the following disclaimer. 9 * 10 * b) Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in 12 * the documentation and/or other materials provided with the distribution. 13 * 14 * c) Neither the name of Cisco Systems, Inc. nor the names of its 15 * contributors may be used to endorse or promote products derived 16 * from this software without specific prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 19 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 20 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 22 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 28 * THE POSSIBILITY OF SUCH DAMAGE. 29 */ 30/* $KAME: sctp.h,v 1.18 2005/03/06 16:04:16 itojun Exp $ */ 31 32#include <sys/cdefs.h> 33__FBSDID("$FreeBSD: head/sys/netinet/sctp.h 215034 2010-11-09 10:59:09Z brucec $"); 34 35#ifndef _NETINET_SCTP_H_ 36#define _NETINET_SCTP_H_ 37 38#include <sys/types.h> 39 40 41#define SCTP_PACKED __attribute__((packed)) 42 43/* 44 * SCTP protocol - RFC2960. 45 */ 46struct sctphdr { 47 uint16_t src_port; /* source port */ 48 uint16_t dest_port; /* destination port */ 49 uint32_t v_tag; /* verification tag of packet */ 50 uint32_t checksum; /* Adler32 C-Sum */ 51 /* chunks follow... */ 52} SCTP_PACKED; 53 54/* 55 * SCTP Chunks 56 */ 57struct sctp_chunkhdr { 58 uint8_t chunk_type; /* chunk type */ 59 uint8_t chunk_flags; /* chunk flags */ 60 uint16_t chunk_length; /* chunk length */ 61 /* optional params follow */ 62} SCTP_PACKED; 63 64/* 65 * SCTP chunk parameters 66 */ 67struct sctp_paramhdr { 68 uint16_t param_type; /* parameter type */ 69 uint16_t param_length; /* parameter length */ 70} SCTP_PACKED; 71 72/* 73 * user socket options: socket API defined 74 */ 75/* 76 * read-write options 77 */ 78#define SCTP_RTOINFO 0x00000001 79#define SCTP_ASSOCINFO 0x00000002 80#define SCTP_INITMSG 0x00000003 81#define SCTP_NODELAY 0x00000004 82#define SCTP_AUTOCLOSE 0x00000005 83#define SCTP_SET_PEER_PRIMARY_ADDR 0x00000006 84#define SCTP_PRIMARY_ADDR 0x00000007 85#define SCTP_ADAPTATION_LAYER 0x00000008 86/* same as above */ 87#define SCTP_ADAPTION_LAYER 0x00000008 88#define SCTP_DISABLE_FRAGMENTS 0x00000009 89#define SCTP_PEER_ADDR_PARAMS 0x0000000a 90#define SCTP_DEFAULT_SEND_PARAM 0x0000000b 91/* ancillary data/notification interest options */ 92#define SCTP_EVENTS 0x0000000c 93/* Without this applied we will give V4 and V6 addresses on a V6 socket */ 94#define SCTP_I_WANT_MAPPED_V4_ADDR 0x0000000d 95#define SCTP_MAXSEG 0x0000000e 96#define SCTP_DELAYED_SACK 0x0000000f 97#define SCTP_FRAGMENT_INTERLEAVE 0x00000010 98#define SCTP_PARTIAL_DELIVERY_POINT 0x00000011 99/* authentication support */ 100#define SCTP_AUTH_CHUNK 0x00000012 101#define SCTP_AUTH_KEY 0x00000013 102#define SCTP_HMAC_IDENT 0x00000014 103#define SCTP_AUTH_ACTIVE_KEY 0x00000015 104#define SCTP_AUTH_DELETE_KEY 0x00000016 105#define SCTP_USE_EXT_RCVINFO 0x00000017 106#define SCTP_AUTO_ASCONF 0x00000018 /* rw */ 107#define SCTP_MAXBURST 0x00000019 /* rw */ 108#define SCTP_MAX_BURST 0x00000019 /* rw */ 109/* assoc level context */ 110#define SCTP_CONTEXT 0x0000001a /* rw */ 111/* explicit EOR signalling */ 112#define SCTP_EXPLICIT_EOR 0x0000001b 113#define SCTP_REUSE_PORT 0x0000001c /* rw */ 114#define SCTP_AUTH_DEACTIVATE_KEY 0x0000001d 115 116/* 117 * read-only options 118 */ 119#define SCTP_STATUS 0x00000100 120#define SCTP_GET_PEER_ADDR_INFO 0x00000101 121/* authentication support */ 122#define SCTP_PEER_AUTH_CHUNKS 0x00000102 123#define SCTP_LOCAL_AUTH_CHUNKS 0x00000103 124#define SCTP_GET_ASSOC_NUMBER 0x00000104 /* ro */ 125#define SCTP_GET_ASSOC_ID_LIST 0x00000105 /* ro */ 126 127/* 128 * user socket options: BSD implementation specific 129 */ 130/* 131 * Blocking I/O is enabled on any TCP type socket by default. For the UDP 132 * model if this is turned on then the socket buffer is shared for send 133 * resources amongst all associations. The default for the UDP model is that 134 * is SS_NBIO is set. Which means all associations have a separate send 135 * limit BUT they will NOT ever BLOCK instead you will get an error back 136 * EAGAIN if you try to send too much. If you want the blocking semantics you 137 * set this option at the cost of sharing one socket send buffer size amongst 138 * all associations. Peeled off sockets turn this option off and block. But 139 * since both TCP and peeled off sockets have only one assoc per socket this 140 * is fine. It probably does NOT make sense to set this on SS_NBIO on a TCP 141 * model OR peeled off UDP model, but we do allow you to do so. You just use 142 * the normal syscall to toggle SS_NBIO the way you want. 143 * 144 * Blocking I/O is controlled by the SS_NBIO flag on the socket state so_state 145 * field. 146 */ 147 148/* these should probably go into sockets API */ 149#define SCTP_RESET_STREAMS 0x00001004 /* wo */ 150 151 152/* here on down are more implementation specific */ 153#define SCTP_SET_DEBUG_LEVEL 0x00001005 154#define SCTP_CLR_STAT_LOG 0x00001007 155/* CMT ON/OFF socket option */ 156#define SCTP_CMT_ON_OFF 0x00001200 157#define SCTP_CMT_USE_DAC 0x00001201 158/* JRS - Pluggable Congestion Control Socket option */ 159#define SCTP_PLUGGABLE_CC 0x00001202 160 161/* read only */ 162#define SCTP_GET_SNDBUF_USE 0x00001101 163#define SCTP_GET_STAT_LOG 0x00001103 164#define SCTP_PCB_STATUS 0x00001104 165#define SCTP_GET_NONCE_VALUES 0x00001105 166 167 168/* Special hook for dynamically setting primary for all assoc's, 169 * this is a write only option that requires root privilege. 170 */ 171#define SCTP_SET_DYNAMIC_PRIMARY 0x00002001 172 173/* VRF (virtual router feature) and multi-VRF support 174 * options. VRF's provide splits within a router 175 * that give the views of multiple routers. A 176 * standard host, without VRF support, is just 177 * a single VRF. If VRF's are supported then 178 * the transport must be VRF aware. This means 179 * that every socket call coming in must be directed 180 * within the endpoint to one of the VRF's it belongs 181 * to. The endpoint, before binding, may select 182 * the "default" VRF it is in by using a set socket 183 * option with SCTP_VRF_ID. This will also 184 * get propagated to the default VRF. Once the 185 * endpoint binds an address then it CANNOT add 186 * additional VRF's to become a Multi-VRF endpoint. 187 * 188 * Before BINDING additional VRF's can be added with 189 * the SCTP_ADD_VRF_ID call or deleted with 190 * SCTP_DEL_VRF_ID. 191 * 192 * Associations are ALWAYS contained inside a single 193 * VRF. They cannot reside in two (or more) VRF's. Incoming 194 * packets, assuming the router is VRF aware, can always 195 * tell us what VRF they arrived on. A host not supporting 196 * any VRF's will find that the packets always arrived on the 197 * single VRF that the host has. 198 * 199 */ 200 201#define SCTP_VRF_ID 0x00003001 202#define SCTP_ADD_VRF_ID 0x00003002 203#define SCTP_GET_VRF_IDS 0x00003003 204#define SCTP_GET_ASOC_VRF 0x00003004 205#define SCTP_DEL_VRF_ID 0x00003005 206 207/* 208 * If you enable packet logging you can get 209 * a poor mans ethereal output in binary 210 * form. Note this is a compile option to 211 * the kernel, SCTP_PACKET_LOGGING, and 212 * without it in your kernel you 213 * will get a EOPNOTSUPP 214 */ 215#define SCTP_GET_PACKET_LOG 0x00004001 216 217/* 218 * hidden implementation specific options these are NOT user visible (should 219 * move out of sctp.h) 220 */ 221/* sctp_bindx() flags as hidden socket options */ 222#define SCTP_BINDX_ADD_ADDR 0x00008001 223#define SCTP_BINDX_REM_ADDR 0x00008002 224/* Hidden socket option that gets the addresses */ 225#define SCTP_GET_PEER_ADDRESSES 0x00008003 226#define SCTP_GET_LOCAL_ADDRESSES 0x00008004 227/* return the total count in bytes needed to hold all local addresses bound */ 228#define SCTP_GET_LOCAL_ADDR_SIZE 0x00008005 229/* Return the total count in bytes needed to hold the remote address */ 230#define SCTP_GET_REMOTE_ADDR_SIZE 0x00008006 231/* hidden option for connectx */ 232#define SCTP_CONNECT_X 0x00008007 233/* hidden option for connectx_delayed, part of sendx */ 234#define SCTP_CONNECT_X_DELAYED 0x00008008 235#define SCTP_CONNECT_X_COMPLETE 0x00008009 236/* hidden socket option based sctp_peeloff */ 237#define SCTP_PEELOFF 0x0000800a 238/* the real worker for sctp_getaddrlen() */ 239#define SCTP_GET_ADDR_LEN 0x0000800b 240/* temporary workaround for Apple listen() issue, no args used */ 241#define SCTP_LISTEN_FIX 0x0000800c 242/* Debug things that need to be purged */ 243#define SCTP_SET_INITIAL_DBG_SEQ 0x00009f00 244 245/* JRS - Supported congestion control modules for pluggable 246 * congestion control 247 */ 248/* Standard TCP Congestion Control */ 249#define SCTP_CC_RFC2581 0x00000000 250/* High Speed TCP Congestion Control (Floyd) */ 251#define SCTP_CC_HSTCP 0x00000001 252/* HTCP Congestion Control */ 253#define SCTP_CC_HTCP 0x00000002 254 255 256/* fragment interleave constants 257 * setting must be one of these or 258 * EINVAL returned. 259 */ 260#define SCTP_FRAG_LEVEL_0 0x00000000 261#define SCTP_FRAG_LEVEL_1 0x00000001 262#define SCTP_FRAG_LEVEL_2 0x00000002 263 264/* 265 * user state values 266 */ 267#define SCTP_CLOSED 0x0000 268#define SCTP_BOUND 0x1000 269#define SCTP_LISTEN 0x2000 270#define SCTP_COOKIE_WAIT 0x0002 271#define SCTP_COOKIE_ECHOED 0x0004 272#define SCTP_ESTABLISHED 0x0008 273#define SCTP_SHUTDOWN_SENT 0x0010 274#define SCTP_SHUTDOWN_RECEIVED 0x0020 275#define SCTP_SHUTDOWN_ACK_SENT 0x0040 276#define SCTP_SHUTDOWN_PENDING 0x0080 277 278/* 279 * SCTP operational error codes (user visible) 280 */ 281#define SCTP_CAUSE_NO_ERROR 0x0000 282#define SCTP_CAUSE_INVALID_STREAM 0x0001 283#define SCTP_CAUSE_MISSING_PARAM 0x0002 284#define SCTP_CAUSE_STALE_COOKIE 0x0003 285#define SCTP_CAUSE_OUT_OF_RESC 0x0004 286#define SCTP_CAUSE_UNRESOLVABLE_ADDR 0x0005 287#define SCTP_CAUSE_UNRECOG_CHUNK 0x0006 288#define SCTP_CAUSE_INVALID_PARAM 0x0007 289#define SCTP_CAUSE_UNRECOG_PARAM 0x0008 290#define SCTP_CAUSE_NO_USER_DATA 0x0009 291#define SCTP_CAUSE_COOKIE_IN_SHUTDOWN 0x000a 292#define SCTP_CAUSE_RESTART_W_NEWADDR 0x000b 293#define SCTP_CAUSE_USER_INITIATED_ABT 0x000c 294#define SCTP_CAUSE_PROTOCOL_VIOLATION 0x000d 295 296/* Error causes from RFC5061 */ 297#define SCTP_CAUSE_DELETING_LAST_ADDR 0x00a0 298#define SCTP_CAUSE_RESOURCE_SHORTAGE 0x00a1 299#define SCTP_CAUSE_DELETING_SRC_ADDR 0x00a2 300#define SCTP_CAUSE_ILLEGAL_ASCONF_ACK 0x00a3 301#define SCTP_CAUSE_REQUEST_REFUSED 0x00a4 302 303/* Error causes from nat-draft */ 304#define SCTP_CAUSE_NAT_COLLIDING_STATE 0x00b0 305#define SCTP_CAUSE_NAT_MISSING_STATE 0x00b1 306 307/* Error causes from RFC4895 */ 308#define SCTP_CAUSE_UNSUPPORTED_HMACID 0x0105 309 310/* 311 * error cause parameters (user visible) 312 */ 313struct sctp_error_cause { 314 uint16_t code; 315 uint16_t length; 316 /* optional cause-specific info may follow */ 317} SCTP_PACKED; 318 319struct sctp_error_invalid_stream { 320 struct sctp_error_cause cause; /* code=SCTP_ERROR_INVALID_STREAM */ 321 uint16_t stream_id; /* stream id of the DATA in error */ 322 uint16_t reserved; 323} SCTP_PACKED; 324 325struct sctp_error_missing_param { 326 struct sctp_error_cause cause; /* code=SCTP_ERROR_MISSING_PARAM */ 327 uint32_t num_missing_params; /* number of missing parameters */ 328 /* uint16_t param_type's follow */ 329} SCTP_PACKED; 330 331struct sctp_error_stale_cookie { 332 struct sctp_error_cause cause; /* code=SCTP_ERROR_STALE_COOKIE */ 333 uint32_t stale_time; /* time in usec of staleness */ 334} SCTP_PACKED; 335 336struct sctp_error_out_of_resource { 337 struct sctp_error_cause cause; /* code=SCTP_ERROR_OUT_OF_RESOURCES */ 338} SCTP_PACKED; 339 340struct sctp_error_unresolv_addr { 341 struct sctp_error_cause cause; /* code=SCTP_ERROR_UNRESOLVABLE_ADDR */ 342 343} SCTP_PACKED; 344 345struct sctp_error_unrecognized_chunk { 346 struct sctp_error_cause cause; /* code=SCTP_ERROR_UNRECOG_CHUNK */ 347 struct sctp_chunkhdr ch;/* header from chunk in error */ 348} SCTP_PACKED; 349 350/* 351 * Main SCTP chunk types we place these here so natd and f/w's in user land 352 * can find them. 353 */ 354/************0x00 series ***********/ 355#define SCTP_DATA 0x00 356#define SCTP_INITIATION 0x01 357#define SCTP_INITIATION_ACK 0x02 358#define SCTP_SELECTIVE_ACK 0x03 359#define SCTP_HEARTBEAT_REQUEST 0x04 360#define SCTP_HEARTBEAT_ACK 0x05 361#define SCTP_ABORT_ASSOCIATION 0x06 362#define SCTP_SHUTDOWN 0x07 363#define SCTP_SHUTDOWN_ACK 0x08 364#define SCTP_OPERATION_ERROR 0x09 365#define SCTP_COOKIE_ECHO 0x0a 366#define SCTP_COOKIE_ACK 0x0b 367#define SCTP_ECN_ECHO 0x0c 368#define SCTP_ECN_CWR 0x0d 369#define SCTP_SHUTDOWN_COMPLETE 0x0e 370/* RFC4895 */ 371#define SCTP_AUTHENTICATION 0x0f 372/* EY nr_sack chunk id*/ 373#define SCTP_NR_SELECTIVE_ACK 0x10 374/************0x40 series ***********/ 375/************0x80 series ***********/ 376/* RFC5061 */ 377#define SCTP_ASCONF_ACK 0x80 378/* draft-ietf-stewart-pktdrpsctp */ 379#define SCTP_PACKET_DROPPED 0x81 380/* draft-ietf-stewart-strreset-xxx */ 381#define SCTP_STREAM_RESET 0x82 382 383/* RFC4820 */ 384#define SCTP_PAD_CHUNK 0x84 385/************0xc0 series ***********/ 386/* RFC3758 */ 387#define SCTP_FORWARD_CUM_TSN 0xc0 388/* RFC5061 */ 389#define SCTP_ASCONF 0xc1 390 391 392/* ABORT and SHUTDOWN COMPLETE FLAG */ 393#define SCTP_HAD_NO_TCB 0x01 394 395/* Packet dropped flags */ 396#define SCTP_FROM_MIDDLE_BOX SCTP_HAD_NO_TCB 397#define SCTP_BADCRC 0x02 398#define SCTP_PACKET_TRUNCATED 0x04 399 400#define SCTP_SAT_NETWORK_MIN 400 /* min ms for RTT to set satellite 401 * time */ 402#define SCTP_SAT_NETWORK_BURST_INCR 2 /* how many times to multiply maxburst 403 * in sat */ 404 405/* Data Chuck Specific Flags */ 406#define SCTP_DATA_FRAG_MASK 0x03 407#define SCTP_DATA_MIDDLE_FRAG 0x00 408#define SCTP_DATA_LAST_FRAG 0x01 409#define SCTP_DATA_FIRST_FRAG 0x02 410#define SCTP_DATA_NOT_FRAG 0x03 411#define SCTP_DATA_UNORDERED 0x04 412#define SCTP_DATA_SACK_IMMEDIATELY 0x08 413/* ECN Nonce: SACK Chunk Specific Flags */ 414#define SCTP_SACK_NONCE_SUM 0x01 415 416/* CMT DAC algorithm SACK flag */ 417#define SCTP_SACK_CMT_DAC 0x80 418 419/* 420 * PCB flags (in sctp_flags bitmask). 421 * Note the features and flags are meant 422 * for use by netstat. 423 */ 424#define SCTP_PCB_FLAGS_UDPTYPE 0x00000001 425#define SCTP_PCB_FLAGS_TCPTYPE 0x00000002 426#define SCTP_PCB_FLAGS_BOUNDALL 0x00000004 427#define SCTP_PCB_FLAGS_ACCEPTING 0x00000008 428#define SCTP_PCB_FLAGS_UNBOUND 0x00000010 429#define SCTP_PCB_FLAGS_CLOSE_IP 0x00040000 430#define SCTP_PCB_FLAGS_WAS_CONNECTED 0x00080000 431#define SCTP_PCB_FLAGS_WAS_ABORTED 0x00100000 432/* TCP model support */ 433 434#define SCTP_PCB_FLAGS_CONNECTED 0x00200000 435#define SCTP_PCB_FLAGS_IN_TCPPOOL 0x00400000 436#define SCTP_PCB_FLAGS_DONT_WAKE 0x00800000 437#define SCTP_PCB_FLAGS_WAKEOUTPUT 0x01000000 438#define SCTP_PCB_FLAGS_WAKEINPUT 0x02000000 439#define SCTP_PCB_FLAGS_BOUND_V6 0x04000000 440#define SCTP_PCB_FLAGS_BLOCKING_IO 0x08000000 441#define SCTP_PCB_FLAGS_SOCKET_GONE 0x10000000 442#define SCTP_PCB_FLAGS_SOCKET_ALLGONE 0x20000000 443#define SCTP_PCB_FLAGS_SOCKET_CANT_READ 0x40000000 444/* flags to copy to new PCB */ 445#define SCTP_PCB_COPY_FLAGS (SCTP_PCB_FLAGS_BOUNDALL|\ 446 SCTP_PCB_FLAGS_WAKEINPUT|\ 447 SCTP_PCB_FLAGS_BOUND_V6) 448 449 450/* 451 * PCB Features (in sctp_features bitmask) 452 */ 453#define SCTP_PCB_FLAGS_EXT_RCVINFO 0x00000002 454#define SCTP_PCB_FLAGS_DONOT_HEARTBEAT 0x00000004 455#define SCTP_PCB_FLAGS_FRAG_INTERLEAVE 0x00000008 456#define SCTP_PCB_FLAGS_INTERLEAVE_STRMS 0x00000010 457#define SCTP_PCB_FLAGS_DO_ASCONF 0x00000020 458#define SCTP_PCB_FLAGS_AUTO_ASCONF 0x00000040 459#define SCTP_PCB_FLAGS_ZERO_COPY_ACTIVE 0x00000080 460/* socket options */ 461#define SCTP_PCB_FLAGS_NODELAY 0x00000100 462#define SCTP_PCB_FLAGS_AUTOCLOSE 0x00000200 463#define SCTP_PCB_FLAGS_RECVDATAIOEVNT 0x00000400 464#define SCTP_PCB_FLAGS_RECVASSOCEVNT 0x00000800 465#define SCTP_PCB_FLAGS_RECVPADDREVNT 0x00001000 466#define SCTP_PCB_FLAGS_RECVPEERERR 0x00002000 467#define SCTP_PCB_FLAGS_RECVSENDFAILEVNT 0x00004000 468#define SCTP_PCB_FLAGS_RECVSHUTDOWNEVNT 0x00008000 469#define SCTP_PCB_FLAGS_ADAPTATIONEVNT 0x00010000 470#define SCTP_PCB_FLAGS_PDAPIEVNT 0x00020000 471#define SCTP_PCB_FLAGS_AUTHEVNT 0x00040000 472#define SCTP_PCB_FLAGS_STREAM_RESETEVNT 0x00080000 473#define SCTP_PCB_FLAGS_NO_FRAGMENT 0x00100000 474#define SCTP_PCB_FLAGS_EXPLICIT_EOR 0x00400000 475#define SCTP_PCB_FLAGS_NEEDS_MAPPED_V4 0x00800000 476#define SCTP_PCB_FLAGS_MULTIPLE_ASCONFS 0x01000000 477#define SCTP_PCB_FLAGS_PORTREUSE 0x02000000 478#define SCTP_PCB_FLAGS_DRYEVNT 0x04000000 479/*- 480 * mobility_features parameters (by micchie).Note 481 * these features are applied against the 482 * sctp_mobility_features flags.. not the sctp_features 483 * flags. 484 */ 485#define SCTP_MOBILITY_BASE 0x00000001 486#define SCTP_MOBILITY_FASTHANDOFF 0x00000002 487#define SCTP_MOBILITY_PRIM_DELETED 0x00000004 488 489 490#define SCTP_SMALLEST_PMTU 512 /* smallest pmtu allowed when disabling PMTU 491 * discovery */ 492 493#include <netinet/sctp_uio.h> 494 495/* This dictates the size of the packet 496 * collection buffer. This only applies 497 * if SCTP_PACKET_LOGGING is enabled in 498 * your config. 499 */ 500#define SCTP_PACKET_LOG_SIZE 65536 501 502/* Maximum delays and such a user can set for options that 503 * take ms. 504 */ 505#define SCTP_MAX_SACK_DELAY 500 /* per RFC4960 */ 506#define SCTP_MAX_HB_INTERVAL 14400000 /* 4 hours in ms */ 507#define SCTP_MAX_COOKIE_LIFE 3600000 /* 1 hour in ms */ 508 509 510/* Types of logging/KTR tracing that can be enabled via the 511 * sysctl net.inet.sctp.sctp_logging. You must also enable 512 * SUBSYS tracing. 513 * Note that you must have the SCTP option in the kernel 514 * to enable these as well. 515 */ 516#define SCTP_BLK_LOGGING_ENABLE 0x00000001 517#define SCTP_CWND_MONITOR_ENABLE 0x00000002 518#define SCTP_CWND_LOGGING_ENABLE 0x00000004 519#define SCTP_EARLYFR_LOGGING_ENABLE 0x00000010 520#define SCTP_FLIGHT_LOGGING_ENABLE 0x00000020 521#define SCTP_FR_LOGGING_ENABLE 0x00000040 522#define SCTP_LOCK_LOGGING_ENABLE 0x00000080 523#define SCTP_MAP_LOGGING_ENABLE 0x00000100 524#define SCTP_MBCNT_LOGGING_ENABLE 0x00000200 525#define SCTP_MBUF_LOGGING_ENABLE 0x00000400 526#define SCTP_NAGLE_LOGGING_ENABLE 0x00000800 527#define SCTP_RECV_RWND_LOGGING_ENABLE 0x00001000 528#define SCTP_RTTVAR_LOGGING_ENABLE 0x00002000 529#define SCTP_SACK_LOGGING_ENABLE 0x00004000 530#define SCTP_SACK_RWND_LOGGING_ENABLE 0x00008000 531#define SCTP_SB_LOGGING_ENABLE 0x00010000 532#define SCTP_STR_LOGGING_ENABLE 0x00020000 533#define SCTP_WAKE_LOGGING_ENABLE 0x00040000 534#define SCTP_LOG_MAXBURST_ENABLE 0x00080000 535#define SCTP_LOG_RWND_ENABLE 0x00100000 536#define SCTP_LOG_SACK_ARRIVALS_ENABLE 0x00200000 537#define SCTP_LTRACE_CHUNK_ENABLE 0x00400000 538#define SCTP_LTRACE_ERROR_ENABLE 0x00800000 539#define SCTP_LAST_PACKET_TRACING 0x01000000 540#define SCTP_THRESHOLD_LOGGING 0x02000000 541#define SCTP_LOG_AT_SEND_2_SCTP 0x04000000 542#define SCTP_LOG_AT_SEND_2_OUTQ 0x08000000 543#define SCTP_LOG_TRY_ADVANCE 0x10000000 544 545 546#undef SCTP_PACKED 547 548#endif /* !_NETINET_SCTP_H_ */ 549