sctp.h revision 170091
1/*- 2 * Copyright (c) 2001-2007, by Cisco Systems, Inc. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions are met: 6 * 7 * a) Redistributions of source code must retain the above copyright notice, 8 * this list of conditions and the following disclaimer. 9 * 10 * b) Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in 12 * the documentation and/or other materials provided with the distribution. 13 * 14 * c) Neither the name of Cisco Systems, Inc. nor the names of its 15 * contributors may be used to endorse or promote products derived 16 * from this software without specific prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 19 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 20 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 22 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 28 * THE POSSIBILITY OF SUCH DAMAGE. 29 */ 30/* $KAME: sctp.h,v 1.18 2005/03/06 16:04:16 itojun Exp $ */ 31 32#include <sys/cdefs.h> 33__FBSDID("$FreeBSD: head/sys/netinet/sctp.h 170091 2007-05-29 09:29:03Z rrs $"); 34 35#ifndef _NETINET_SCTP_H_ 36#define _NETINET_SCTP_H_ 37 38#include <sys/types.h> 39 40/* 41 * SCTP protocol - RFC2960. 42 */ 43 44struct sctphdr { 45 uint16_t src_port; /* source port */ 46 uint16_t dest_port; /* destination port */ 47 uint32_t v_tag; /* verification tag of packet */ 48 uint32_t checksum; /* Adler32 C-Sum */ 49 /* chunks follow... */ 50}; 51 52/* 53 * SCTP Chunks 54 */ 55struct sctp_chunkhdr { 56 uint8_t chunk_type; /* chunk type */ 57 uint8_t chunk_flags; /* chunk flags */ 58 uint16_t chunk_length; /* chunk length */ 59 /* optional params follow */ 60}; 61 62/* 63 * SCTP chunk parameters 64 */ 65struct sctp_paramhdr { 66 uint16_t param_type; /* parameter type */ 67 uint16_t param_length; /* parameter length */ 68}; 69 70/* 71 * user socket options: socket API defined 72 */ 73/* 74 * read-write options 75 */ 76#define SCTP_RTOINFO 0x00000001 77#define SCTP_ASSOCINFO 0x00000002 78#define SCTP_INITMSG 0x00000003 79#define SCTP_NODELAY 0x00000004 80#define SCTP_AUTOCLOSE 0x00000005 81#define SCTP_SET_PEER_PRIMARY_ADDR 0x00000006 82#define SCTP_PRIMARY_ADDR 0x00000007 83#define SCTP_ADAPTATION_LAYER 0x00000008 84/* same as above */ 85#define SCTP_ADAPTION_LAYER 0x00000008 86#define SCTP_DISABLE_FRAGMENTS 0x00000009 87#define SCTP_PEER_ADDR_PARAMS 0x0000000a 88#define SCTP_DEFAULT_SEND_PARAM 0x0000000b 89/* ancillary data/notification interest options */ 90#define SCTP_EVENTS 0x0000000c 91/* Without this applied we will give V4 and V6 addresses on a V6 socket */ 92#define SCTP_I_WANT_MAPPED_V4_ADDR 0x0000000d 93#define SCTP_MAXSEG 0x0000000e 94#define SCTP_DELAYED_SACK 0x0000000f 95#define SCTP_FRAGMENT_INTERLEAVE 0x00000010 96#define SCTP_PARTIAL_DELIVERY_POINT 0x00000011 97/* authentication support */ 98#define SCTP_AUTH_CHUNK 0x00000012 99#define SCTP_AUTH_KEY 0x00000013 100#define SCTP_HMAC_IDENT 0x00000014 101#define SCTP_AUTH_ACTIVE_KEY 0x00000015 102#define SCTP_AUTH_DELETE_KEY 0x00000016 103#define SCTP_USE_EXT_RCVINFO 0x00000017 104#define SCTP_AUTO_ASCONF 0x00000018 /* rw */ 105#define SCTP_MAXBURST 0x00000019 /* rw */ 106#define SCTP_MAX_BURST 0x00000019 /* rw */ 107/* assoc level context */ 108#define SCTP_CONTEXT 0x0000001a /* rw */ 109/* explict EOR signalling */ 110#define SCTP_EXPLICIT_EOR 0x0000001b 111 112/* 113 * read-only options 114 */ 115#define SCTP_STATUS 0x00000100 116#define SCTP_GET_PEER_ADDR_INFO 0x00000101 117/* authentication support */ 118#define SCTP_PEER_AUTH_CHUNKS 0x00000102 119#define SCTP_LOCAL_AUTH_CHUNKS 0x00000103 120#define SCTP_GET_ASSOC_NUMBER 0x00000104 /* ro */ 121#define SCTP_GET_ASSOC_ID_LIST 0x00000105 /* ro */ 122 123/* 124 * user socket options: BSD implementation specific 125 */ 126/* 127 * Blocking I/O is enabled on any TCP type socket by default. For the UDP 128 * model if this is turned on then the socket buffer is shared for send 129 * resources amongst all associations. The default for the UDP model is that 130 * is SS_NBIO is set. Which means all associations have a seperate send 131 * limit BUT they will NOT ever BLOCK instead you will get an error back 132 * EAGAIN if you try to send to much. If you want the blocking symantics you 133 * set this option at the cost of sharing one socket send buffer size amongst 134 * all associations. Peeled off sockets turn this option off and block. But 135 * since both TCP and peeled off sockets have only one assoc per socket this 136 * is fine. It probably does NOT make sense to set this on SS_NBIO on a TCP 137 * model OR peeled off UDP model, but we do allow you to do so. You just use 138 * the normal syscall to toggle SS_NBIO the way you want. 139 * 140 * Blocking I/O is controled by the SS_NBIO flag on the socket state so_state 141 * field. 142 */ 143 144/* these should probably go into sockets API */ 145#define SCTP_RESET_STREAMS 0x00001004 /* wo */ 146 147 148/* here on down are more implementation specific */ 149#define SCTP_SET_DEBUG_LEVEL 0x00001005 150#define SCTP_CLR_STAT_LOG 0x00001007 151/* CMT ON/OFF socket option */ 152#define SCTP_CMT_ON_OFF 0x00001200 153#define SCTP_CMT_USE_DAC 0x00001201 154 155/* read only */ 156#define SCTP_GET_SNDBUF_USE 0x00001101 157#define SCTP_GET_STAT_LOG 0x00001103 158#define SCTP_PCB_STATUS 0x00001104 159#define SCTP_GET_NONCE_VALUES 0x00001105 160 161 162/* Special hook for dynamically setting primary for all assoc's, 163 * this is a write only option that requires root privledge. 164 */ 165#define SCTP_SET_DYNAMIC_PRIMARY 0x00002001 166 167/* VRF (virtual router feature) and multi-VRF support 168 * options. VRF's provide splits within a router 169 * that give the views of multiple routers. A 170 * standard host, without VRF support, is just 171 * a single VRF. If VRF's are supported then 172 * the transport must be VRF aware. This means 173 * that every socket call coming in must be directed 174 * within the endpoint to one of the VRF's it belongs 175 * to. The endpoint, before binding, may select 176 * the "default" VRF it is in by using a set socket 177 * option with SCTP_VRF_ID. This will also 178 * get propegated to the default VRF. Once the 179 * endpoint binds an address then it CANNOT add 180 * additional VRF's to become a Multi-VRF endpoint. 181 * 182 * Before BINDING additional VRF's can be added with 183 * the SCTP_ADD_VRF_ID call or deleted with 184 * SCTP_DEL_VRF_ID. 185 * 186 * Associations are ALWAYS contained inside a single 187 * VRF. They cannot reside in two (or more) VRF's. Incoming 188 * packets, assuming the router is VRF aware, can always 189 * tell us what VRF they arrived on. A host not supporting 190 * any VRF's will find that the packets always arrived on the 191 * single VRF that the host has. 192 * 193 */ 194 195#define SCTP_VRF_ID 0x00003001 196#define SCTP_ADD_VRF_ID 0x00003002 197#define SCTP_GET_VRF_IDS 0x00003003 198#define SCTP_GET_ASOC_VRF 0x00003004 199#define SCTP_DEL_VRF_ID 0x00003005 200 201/* 202 * If you enable packet logging you can get 203 * a poor mans ethereal output in binary 204 * form. Note this is a compile option to 205 * the kernel, SCTP_PACKET_LOGGING, and 206 * without it in your kernel you 207 * will get a ENOSUPPORT. 208 */ 209#define SCTP_GET_PACKET_LOG 0x00004001 210 211/* 212 * hidden implementation specific options these are NOT user visible (should 213 * move out of sctp.h) 214 */ 215/* sctp_bindx() flags as hidden socket options */ 216#define SCTP_BINDX_ADD_ADDR 0x00008001 217#define SCTP_BINDX_REM_ADDR 0x00008002 218/* Hidden socket option that gets the addresses */ 219#define SCTP_GET_PEER_ADDRESSES 0x00008003 220#define SCTP_GET_LOCAL_ADDRESSES 0x00008004 221/* return the total count in bytes needed to hold all local addresses bound */ 222#define SCTP_GET_LOCAL_ADDR_SIZE 0x00008005 223/* Return the total count in bytes needed to hold the remote address */ 224#define SCTP_GET_REMOTE_ADDR_SIZE 0x00008006 225/* hidden option for connectx */ 226#define SCTP_CONNECT_X 0x00008007 227/* hidden option for connectx_delayed, part of sendx */ 228#define SCTP_CONNECT_X_DELAYED 0x00008008 229#define SCTP_CONNECT_X_COMPLETE 0x00008009 230/* hidden socket option based sctp_peeloff */ 231#define SCTP_PEELOFF 0x0000800a 232/* the real worker for sctp_getaddrlen() */ 233#define SCTP_GET_ADDR_LEN 0x0000800b 234/* temporary workaround for Apple listen() issue, no args used */ 235#define SCTP_LISTEN_FIX 0x0000800c 236/* Debug things that need to be purged */ 237#define SCTP_SET_INITIAL_DBG_SEQ 0x00009f00 238 239 240/* fragment interleave constants 241 * setting must be one of these or 242 * EINVAL returned. 243 */ 244#define SCTP_FRAG_LEVEL_0 0x00000000 245#define SCTP_FRAG_LEVEL_1 0x00000001 246#define SCTP_FRAG_LEVEL_2 0x00000002 247 248/* 249 * user state values 250 */ 251#define SCTP_CLOSED 0x0000 252#define SCTP_BOUND 0x1000 253#define SCTP_LISTEN 0x2000 254#define SCTP_COOKIE_WAIT 0x0002 255#define SCTP_COOKIE_ECHOED 0x0004 256#define SCTP_ESTABLISHED 0x0008 257#define SCTP_SHUTDOWN_SENT 0x0010 258#define SCTP_SHUTDOWN_RECEIVED 0x0020 259#define SCTP_SHUTDOWN_ACK_SENT 0x0040 260#define SCTP_SHUTDOWN_PENDING 0x0080 261 262/* 263 * SCTP operational error codes (user visible) 264 */ 265#define SCTP_CAUSE_NO_ERROR 0x0000 266#define SCTP_CAUSE_INVALID_STREAM 0x0001 267#define SCTP_CAUSE_MISSING_PARAM 0x0002 268#define SCTP_CAUSE_STALE_COOKIE 0x0003 269#define SCTP_CAUSE_OUT_OF_RESC 0x0004 270#define SCTP_CAUSE_UNRESOLVABLE_ADDR 0x0005 271#define SCTP_CAUSE_UNRECOG_CHUNK 0x0006 272#define SCTP_CAUSE_INVALID_PARAM 0x0007 273#define SCTP_CAUSE_UNRECOG_PARAM 0x0008 274#define SCTP_CAUSE_NO_USER_DATA 0x0009 275#define SCTP_CAUSE_COOKIE_IN_SHUTDOWN 0x000a 276#define SCTP_CAUSE_RESTART_W_NEWADDR 0x000b 277#define SCTP_CAUSE_USER_INITIATED_ABT 0x000c 278#define SCTP_CAUSE_PROTOCOL_VIOLATION 0x000d 279 280/* Error causes from draft-ietf-tsvwg-addip-sctp */ 281#define SCTP_CAUSE_DELETING_LAST_ADDR 0x0100 282#define SCTP_CAUSE_RESOURCE_SHORTAGE 0x0101 283#define SCTP_CAUSE_DELETING_SRC_ADDR 0x0102 284#define SCTP_CAUSE_ILLEGAL_ASCONF_ACK 0x0103 285#define SCTP_CAUSE_REQUEST_REFUSED 0x0104 286 287/* Error causes from draft-ietf-tsvwg-sctp-auth */ 288#define SCTP_CAUSE_UNSUPPORTED_HMACID 0x0105 289 290/* 291 * error cause parameters (user visisble) 292 */ 293struct sctp_error_cause { 294 uint16_t code; 295 uint16_t length; 296 /* optional cause-specific info may follow */ 297}; 298 299struct sctp_error_invalid_stream { 300 struct sctp_error_cause cause; /* code=SCTP_ERROR_INVALID_STREAM */ 301 uint16_t stream_id; /* stream id of the DATA in error */ 302 uint16_t reserved; 303}; 304 305struct sctp_error_missing_param { 306 struct sctp_error_cause cause; /* code=SCTP_ERROR_MISSING_PARAM */ 307 uint32_t num_missing_params; /* number of missing parameters */ 308 /* uint16_t param_type's follow */ 309}; 310 311struct sctp_error_stale_cookie { 312 struct sctp_error_cause cause; /* code=SCTP_ERROR_STALE_COOKIE */ 313 uint32_t stale_time; /* time in usec of staleness */ 314}; 315 316struct sctp_error_out_of_resource { 317 struct sctp_error_cause cause; /* code=SCTP_ERROR_OUT_OF_RESOURCES */ 318}; 319 320struct sctp_error_unresolv_addr { 321 struct sctp_error_cause cause; /* code=SCTP_ERROR_UNRESOLVABLE_ADDR */ 322 323}; 324 325struct sctp_error_unrecognized_chunk { 326 struct sctp_error_cause cause; /* code=SCTP_ERROR_UNRECOG_CHUNK */ 327 struct sctp_chunkhdr ch;/* header from chunk in error */ 328}; 329 330#define HAVE_SCTP 1 331#define HAVE_KERNEL_SCTP 1 332#define HAVE_SCTP_PRSCTP 1 333#define HAVE_SCTP_ADDIP 1 334#define HAVE_SCTP_CANSET_PRIMARY 1 335#define HAVE_SCTP_SAT_CAPABILITY 1 336#define HAVE_SCTP_MULTIBUF 1 337#define HAVE_SCTP_NOCONNECT 0 338#define HAVE_SCTP_ECN_NONCE 1 /* ECN Nonce option */ 339#define HAVE_SCTP_AUTH 1 340#define HAVE_SCTP_EXT_RCVINFO 1 341#define HAVE_SCTP_CONNECTX 1 342/* 343 * Main SCTP chunk types we place these here so natd and f/w's in user land 344 * can find them. 345 */ 346/************0x00 series ***********/ 347#define SCTP_DATA 0x00 348#define SCTP_INITIATION 0x01 349#define SCTP_INITIATION_ACK 0x02 350#define SCTP_SELECTIVE_ACK 0x03 351#define SCTP_HEARTBEAT_REQUEST 0x04 352#define SCTP_HEARTBEAT_ACK 0x05 353#define SCTP_ABORT_ASSOCIATION 0x06 354#define SCTP_SHUTDOWN 0x07 355#define SCTP_SHUTDOWN_ACK 0x08 356#define SCTP_OPERATION_ERROR 0x09 357#define SCTP_COOKIE_ECHO 0x0a 358#define SCTP_COOKIE_ACK 0x0b 359#define SCTP_ECN_ECHO 0x0c 360#define SCTP_ECN_CWR 0x0d 361#define SCTP_SHUTDOWN_COMPLETE 0x0e 362/* draft-ietf-tsvwg-sctp-auth */ 363#define SCTP_AUTHENTICATION 0x0f 364/************0x40 series ***********/ 365/************0x80 series ***********/ 366/* draft-ietf-tsvwg-addip-sctp */ 367#define SCTP_ASCONF_ACK 0x80 368/* draft-ietf-stewart-pktdrpsctp */ 369#define SCTP_PACKET_DROPPED 0x81 370/* draft-ietf-stewart-strreset-xxx */ 371#define SCTP_STREAM_RESET 0x82 372/************0xc0 series ***********/ 373/* RFC3758 */ 374#define SCTP_FORWARD_CUM_TSN 0xc0 375/* draft-ietf-tsvwg-addip-sctp */ 376#define SCTP_ASCONF 0xc1 377 378 379/* ABORT and SHUTDOWN COMPLETE FLAG */ 380#define SCTP_HAD_NO_TCB 0x01 381 382/* Packet dropped flags */ 383#define SCTP_FROM_MIDDLE_BOX SCTP_HAD_NO_TCB 384#define SCTP_BADCRC 0x02 385#define SCTP_PACKET_TRUNCATED 0x04 386 387#define SCTP_SAT_NETWORK_MIN 400 /* min ms for RTT to set satellite 388 * time */ 389#define SCTP_SAT_NETWORK_BURST_INCR 2 /* how many times to multiply maxburst 390 * in sat */ 391 392/* Data Chuck Specific Flags */ 393#define SCTP_DATA_FRAG_MASK 0x03 394#define SCTP_DATA_MIDDLE_FRAG 0x00 395#define SCTP_DATA_LAST_FRAG 0x01 396#define SCTP_DATA_FIRST_FRAG 0x02 397#define SCTP_DATA_NOT_FRAG 0x03 398#define SCTP_DATA_UNORDERED 0x04 399 400/* ECN Nonce: SACK Chunk Specific Flags */ 401#define SCTP_SACK_NONCE_SUM 0x01 402 403/* CMT DAC algorithm SACK flag */ 404#define SCTP_SACK_CMT_DAC 0x80 405 406/* 407 * PCB flags (in sctp_flags bitmask). 408 * Note the features and flags are meant 409 * for use by netstat. 410 */ 411#define SCTP_PCB_FLAGS_UDPTYPE 0x00000001 412#define SCTP_PCB_FLAGS_TCPTYPE 0x00000002 413#define SCTP_PCB_FLAGS_BOUNDALL 0x00000004 414#define SCTP_PCB_FLAGS_ACCEPTING 0x00000008 415#define SCTP_PCB_FLAGS_UNBOUND 0x00000010 416#define SCTP_PCB_FLAGS_LISTENING 0x00000020 417#define SCTP_PCB_FLAGS_CLOSE_IP 0x00040000 418#define SCTP_PCB_FLAGS_WAS_CONNECTED 0x00080000 419#define SCTP_PCB_FLAGS_WAS_ABORTED 0x00100000 420/* TCP model support */ 421 422#define SCTP_PCB_FLAGS_CONNECTED 0x00200000 423#define SCTP_PCB_FLAGS_IN_TCPPOOL 0x00400000 424#define SCTP_PCB_FLAGS_DONT_WAKE 0x00800000 425#define SCTP_PCB_FLAGS_WAKEOUTPUT 0x01000000 426#define SCTP_PCB_FLAGS_WAKEINPUT 0x02000000 427#define SCTP_PCB_FLAGS_BOUND_V6 0x04000000 428#define SCTP_PCB_FLAGS_NEEDS_MAPPED_V4 0x08000000 429#define SCTP_PCB_FLAGS_BLOCKING_IO 0x10000000 430#define SCTP_PCB_FLAGS_SOCKET_GONE 0x20000000 431#define SCTP_PCB_FLAGS_SOCKET_ALLGONE 0x40000000 432/* flags to copy to new PCB */ 433#define SCTP_PCB_COPY_FLAGS 0x0e000004 434 435 436/* 437 * PCB Features (in sctp_features bitmask) 438 */ 439#define SCTP_PCB_FLAGS_EXT_RCVINFO 0x00000002 440#define SCTP_PCB_FLAGS_DONOT_HEARTBEAT 0x00000004 441#define SCTP_PCB_FLAGS_FRAG_INTERLEAVE 0x00000008 442#define SCTP_PCB_FLAGS_INTERLEAVE_STRMS 0x00000010 443#define SCTP_PCB_FLAGS_DO_ASCONF 0x00000020 444#define SCTP_PCB_FLAGS_AUTO_ASCONF 0x00000040 445#define SCTP_PCB_FLAGS_ZERO_COPY_ACTIVE 0x00000080 446 447/* socket options */ 448#define SCTP_PCB_FLAGS_NODELAY 0x00000100 449#define SCTP_PCB_FLAGS_AUTOCLOSE 0x00000200 450#define SCTP_PCB_FLAGS_RECVDATAIOEVNT 0x00000400 451#define SCTP_PCB_FLAGS_RECVASSOCEVNT 0x00000800 452#define SCTP_PCB_FLAGS_RECVPADDREVNT 0x00001000 453#define SCTP_PCB_FLAGS_RECVPEERERR 0x00002000 454#define SCTP_PCB_FLAGS_RECVSENDFAILEVNT 0x00004000 455#define SCTP_PCB_FLAGS_RECVSHUTDOWNEVNT 0x00008000 456#define SCTP_PCB_FLAGS_ADAPTATIONEVNT 0x00010000 457#define SCTP_PCB_FLAGS_PDAPIEVNT 0x00020000 458#define SCTP_PCB_FLAGS_AUTHEVNT 0x00040000 459#define SCTP_PCB_FLAGS_STREAM_RESETEVNT 0x00080000 460#define SCTP_PCB_FLAGS_NO_FRAGMENT 0x00100000 461#define SCTP_PCB_FLAGS_EXPLICIT_EOR 0x00400000 462 463#define SCTP_SMALLEST_PMTU 512 /* smallest pmtu allowed when disabling PMTU 464 * discovery */ 465 466#include <netinet/sctp_uio.h> 467 468#define SCTP_PACKET_LOG_SIZE 65536 469 470 471#endif /* !_NETINET_SCTP_H_ */ 472