sctp.h revision 169382
1/*- 2 * Copyright (c) 2001-2007, by Cisco Systems, Inc. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions are met: 6 * 7 * a) Redistributions of source code must retain the above copyright notice, 8 * this list of conditions and the following disclaimer. 9 * 10 * b) Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in 12 * the documentation and/or other materials provided with the distribution. 13 * 14 * c) Neither the name of Cisco Systems, Inc. nor the names of its 15 * contributors may be used to endorse or promote products derived 16 * from this software without specific prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 19 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 20 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 22 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 28 * THE POSSIBILITY OF SUCH DAMAGE. 29 */ 30/* $KAME: sctp.h,v 1.18 2005/03/06 16:04:16 itojun Exp $ */ 31 32#include <sys/cdefs.h> 33__FBSDID("$FreeBSD: head/sys/netinet/sctp.h 169382 2007-05-08 17:01:12Z rrs $"); 34 35#ifndef _NETINET_SCTP_H_ 36#define _NETINET_SCTP_H_ 37 38#include <sys/types.h> 39 40/* 41 * SCTP protocol - RFC2960. 42 */ 43 44struct sctphdr { 45 uint16_t src_port; /* source port */ 46 uint16_t dest_port; /* destination port */ 47 uint32_t v_tag; /* verification tag of packet */ 48 uint32_t checksum; /* Adler32 C-Sum */ 49 /* chunks follow... */ 50}; 51 52/* 53 * SCTP Chunks 54 */ 55struct sctp_chunkhdr { 56 uint8_t chunk_type; /* chunk type */ 57 uint8_t chunk_flags; /* chunk flags */ 58 uint16_t chunk_length; /* chunk length */ 59 /* optional params follow */ 60}; 61 62/* 63 * SCTP chunk parameters 64 */ 65struct sctp_paramhdr { 66 uint16_t param_type; /* parameter type */ 67 uint16_t param_length; /* parameter length */ 68}; 69 70/* 71 * user socket options: socket API defined 72 */ 73/* 74 * read-write options 75 */ 76#define SCTP_RTOINFO 0x00000001 77#define SCTP_ASSOCINFO 0x00000002 78#define SCTP_INITMSG 0x00000003 79#define SCTP_NODELAY 0x00000004 80#define SCTP_AUTOCLOSE 0x00000005 81#define SCTP_SET_PEER_PRIMARY_ADDR 0x00000006 82#define SCTP_PRIMARY_ADDR 0x00000007 83#define SCTP_ADAPTATION_LAYER 0x00000008 84/* same as above */ 85#define SCTP_ADAPTION_LAYER 0x00000008 86#define SCTP_DISABLE_FRAGMENTS 0x00000009 87#define SCTP_PEER_ADDR_PARAMS 0x0000000a 88#define SCTP_DEFAULT_SEND_PARAM 0x0000000b 89/* ancillary data/notification interest options */ 90#define SCTP_EVENTS 0x0000000c 91/* Without this applied we will give V4 and V6 addresses on a V6 socket */ 92#define SCTP_I_WANT_MAPPED_V4_ADDR 0x0000000d 93#define SCTP_MAXSEG 0x0000000e 94#define SCTP_DELAYED_ACK_TIME 0x0000000f 95#define SCTP_FRAGMENT_INTERLEAVE 0x00000010 96#define SCTP_PARTIAL_DELIVERY_POINT 0x00000011 97/* authentication support */ 98#define SCTP_AUTH_CHUNK 0x00000012 99#define SCTP_AUTH_KEY 0x00000013 100#define SCTP_HMAC_IDENT 0x00000014 101#define SCTP_AUTH_ACTIVE_KEY 0x00000015 102#define SCTP_AUTH_DELETE_KEY 0x00000016 103#define SCTP_USE_EXT_RCVINFO 0x00000017 104#define SCTP_AUTO_ASCONF 0x00000018 /* rw */ 105#define SCTP_MAXBURST 0x00000019 /* rw */ 106/* assoc level context */ 107#define SCTP_CONTEXT 0x0000001a /* rw */ 108/* explict EOR signalling */ 109#define SCTP_EXPLICIT_EOR 0x0000001b 110 111/* 112 * read-only options 113 */ 114#define SCTP_STATUS 0x00000100 115#define SCTP_GET_PEER_ADDR_INFO 0x00000101 116/* authentication support */ 117#define SCTP_PEER_AUTH_CHUNKS 0x00000102 118#define SCTP_LOCAL_AUTH_CHUNKS 0x00000103 119 120 121/* 122 * user socket options: BSD implementation specific 123 */ 124/* 125 * Blocking I/O is enabled on any TCP type socket by default. For the UDP 126 * model if this is turned on then the socket buffer is shared for send 127 * resources amongst all associations. The default for the UDP model is that 128 * is SS_NBIO is set. Which means all associations have a seperate send 129 * limit BUT they will NOT ever BLOCK instead you will get an error back 130 * EAGAIN if you try to send to much. If you want the blocking symantics you 131 * set this option at the cost of sharing one socket send buffer size amongst 132 * all associations. Peeled off sockets turn this option off and block. But 133 * since both TCP and peeled off sockets have only one assoc per socket this 134 * is fine. It probably does NOT make sense to set this on SS_NBIO on a TCP 135 * model OR peeled off UDP model, but we do allow you to do so. You just use 136 * the normal syscall to toggle SS_NBIO the way you want. 137 * 138 * Blocking I/O is controled by the SS_NBIO flag on the socket state so_state 139 * field. 140 */ 141 142/* these should probably go into sockets API */ 143#define SCTP_RESET_STREAMS 0x00001004 /* wo */ 144 145 146/* here on down are more implementation specific */ 147#define SCTP_SET_DEBUG_LEVEL 0x00001005 148#define SCTP_CLR_STAT_LOG 0x00001007 149/* CMT ON/OFF socket option */ 150#define SCTP_CMT_ON_OFF 0x00001200 151#define SCTP_CMT_USE_DAC 0x00001201 152 153/* read only */ 154#define SCTP_GET_SNDBUF_USE 0x00001101 155#define SCTP_GET_STAT_LOG 0x00001103 156#define SCTP_GET_ASOC_ID_LIST 0x00001104 /* ro */ 157#define SCTP_PCB_STATUS 0x00001105 158#define SCTP_GET_NONCE_VALUES 0x00001106 159 160/* Special hook for dynamically setting primary for all assoc's, 161 * this is a write only option that requires root privledge. 162 */ 163#define SCTP_SET_DYNAMIC_PRIMARY 0x00002001 164 165/* VRF (virtual router feature) and multi-VRF support 166 * options. VRF's provide splits within a router 167 * that give the views of multiple routers. A 168 * standard host, without VRF support, is just 169 * a single VRF. If VRF's are supported then 170 * the transport must be VRF aware. This means 171 * that every socket call coming in must be directed 172 * within the endpoint to one of the VRF's it belongs 173 * to. The endpoint, before binding, may select 174 * the "default" VRF it is in by using a set socket 175 * option with SCTP_VRF_ID. This will also 176 * get propegated to the default VRF. Once the 177 * endpoint binds an address then it CANNOT add 178 * additional VRF's to become a Multi-VRF endpoint. 179 * 180 * Before BINDING additional VRF's can be added with 181 * the SCTP_ADD_VRF_ID call or deleted with 182 * SCTP_DEL_VRF_ID. 183 * 184 * Associations are ALWAYS contained inside a single 185 * VRF. They cannot reside in two (or more) VRF's. Incoming 186 * packets, assuming the router is VRF aware, can always 187 * tell us what VRF they arrived on. A host not supporting 188 * any VRF's will find that the packets always arrived on the 189 * single VRF that the host has. 190 * 191 */ 192 193#define SCTP_VRF_ID 0x00003001 194#define SCTP_ADD_VRF_ID 0x00003002 195#define SCTP_GET_VRF_IDS 0x00003003 196#define SCTP_GET_ASOC_VRF 0x00003004 197#define SCTP_DEL_VRF_ID 0x00003005 198/* 199 * hidden implementation specific options these are NOT user visible (should 200 * move out of sctp.h) 201 */ 202/* sctp_bindx() flags as hidden socket options */ 203#define SCTP_BINDX_ADD_ADDR 0x00008001 204#define SCTP_BINDX_REM_ADDR 0x00008002 205/* Hidden socket option that gets the addresses */ 206#define SCTP_GET_PEER_ADDRESSES 0x00008003 207#define SCTP_GET_LOCAL_ADDRESSES 0x00008004 208/* return the total count in bytes needed to hold all local addresses bound */ 209#define SCTP_GET_LOCAL_ADDR_SIZE 0x00008005 210/* Return the total count in bytes needed to hold the remote address */ 211#define SCTP_GET_REMOTE_ADDR_SIZE 0x00008006 212/* hidden option for connectx */ 213#define SCTP_CONNECT_X 0x00008007 214/* hidden option for connectx_delayed, part of sendx */ 215#define SCTP_CONNECT_X_DELAYED 0x00008008 216#define SCTP_CONNECT_X_COMPLETE 0x00008009 217/* hidden socket option based sctp_peeloff */ 218#define SCTP_PEELOFF 0x0000800a 219/* the real worker for sctp_getaddrlen() */ 220#define SCTP_GET_ADDR_LEN 0x0000800b 221/* temporary workaround for Apple listen() issue, no args used */ 222#define SCTP_LISTEN_FIX 0x0000800c 223/* Debug things that need to be purged */ 224#define SCTP_SET_INITIAL_DBG_SEQ 0x00009f00 225 226 227/* fragment interleave constants 228 * setting must be one of these or 229 * EINVAL returned. 230 */ 231#define SCTP_FRAG_LEVEL_0 0x00000000 232#define SCTP_FRAG_LEVEL_1 0x00000001 233#define SCTP_FRAG_LEVEL_2 0x00000002 234 235/* 236 * user state values 237 */ 238#define SCTP_CLOSED 0x0000 239#define SCTP_BOUND 0x1000 240#define SCTP_LISTEN 0x2000 241#define SCTP_COOKIE_WAIT 0x0002 242#define SCTP_COOKIE_ECHOED 0x0004 243#define SCTP_ESTABLISHED 0x0008 244#define SCTP_SHUTDOWN_SENT 0x0010 245#define SCTP_SHUTDOWN_RECEIVED 0x0020 246#define SCTP_SHUTDOWN_ACK_SENT 0x0040 247#define SCTP_SHUTDOWN_PENDING 0x0080 248 249/* 250 * SCTP operational error codes (user visible) 251 */ 252#define SCTP_CAUSE_NO_ERROR 0x0000 253#define SCTP_CAUSE_INVALID_STREAM 0x0001 254#define SCTP_CAUSE_MISSING_PARAM 0x0002 255#define SCTP_CAUSE_STALE_COOKIE 0x0003 256#define SCTP_CAUSE_OUT_OF_RESC 0x0004 257#define SCTP_CAUSE_UNRESOLVABLE_ADDR 0x0005 258#define SCTP_CAUSE_UNRECOG_CHUNK 0x0006 259#define SCTP_CAUSE_INVALID_PARAM 0x0007 260#define SCTP_CAUSE_UNRECOG_PARAM 0x0008 261#define SCTP_CAUSE_NO_USER_DATA 0x0009 262#define SCTP_CAUSE_COOKIE_IN_SHUTDOWN 0x000a 263#define SCTP_CAUSE_RESTART_W_NEWADDR 0x000b 264#define SCTP_CAUSE_USER_INITIATED_ABT 0x000c 265#define SCTP_CAUSE_PROTOCOL_VIOLATION 0x000d 266 267/* Error causes from draft-ietf-tsvwg-addip-sctp */ 268#define SCTP_CAUSE_DELETING_LAST_ADDR 0x0100 269#define SCTP_CAUSE_RESOURCE_SHORTAGE 0x0101 270#define SCTP_CAUSE_DELETING_SRC_ADDR 0x0102 271#define SCTP_CAUSE_ILLEGAL_ASCONF_ACK 0x0103 272#define SCTP_CAUSE_REQUEST_REFUSED 0x0104 273 274/* Error causes from draft-ietf-tsvwg-sctp-auth */ 275#define SCTP_CAUSE_UNSUPPORTED_HMACID 0x0105 276 277/* 278 * error cause parameters (user visisble) 279 */ 280struct sctp_error_cause { 281 uint16_t code; 282 uint16_t length; 283 /* optional cause-specific info may follow */ 284}; 285 286struct sctp_error_invalid_stream { 287 struct sctp_error_cause cause; /* code=SCTP_ERROR_INVALID_STREAM */ 288 uint16_t stream_id; /* stream id of the DATA in error */ 289 uint16_t reserved; 290}; 291 292struct sctp_error_missing_param { 293 struct sctp_error_cause cause; /* code=SCTP_ERROR_MISSING_PARAM */ 294 uint32_t num_missing_params; /* number of missing parameters */ 295 /* uint16_t param_type's follow */ 296}; 297 298struct sctp_error_stale_cookie { 299 struct sctp_error_cause cause; /* code=SCTP_ERROR_STALE_COOKIE */ 300 uint32_t stale_time; /* time in usec of staleness */ 301}; 302 303struct sctp_error_out_of_resource { 304 struct sctp_error_cause cause; /* code=SCTP_ERROR_OUT_OF_RESOURCES */ 305}; 306 307struct sctp_error_unresolv_addr { 308 struct sctp_error_cause cause; /* code=SCTP_ERROR_UNRESOLVABLE_ADDR */ 309 310}; 311 312struct sctp_error_unrecognized_chunk { 313 struct sctp_error_cause cause; /* code=SCTP_ERROR_UNRECOG_CHUNK */ 314 struct sctp_chunkhdr ch;/* header from chunk in error */ 315}; 316 317#define HAVE_SCTP 1 318#define HAVE_KERNEL_SCTP 1 319#define HAVE_SCTP_PRSCTP 1 320#define HAVE_SCTP_ADDIP 1 321#define HAVE_SCTP_CANSET_PRIMARY 1 322#define HAVE_SCTP_SAT_CAPABILITY 1 323#define HAVE_SCTP_MULTIBUF 1 324#define HAVE_SCTP_NOCONNECT 0 325#define HAVE_SCTP_ECN_NONCE 1 /* ECN Nonce option */ 326#define HAVE_SCTP_AUTH 1 327#define HAVE_SCTP_EXT_RCVINFO 1 328#define HAVE_SCTP_CONNECTX 1 329/* 330 * Main SCTP chunk types we place these here so natd and f/w's in user land 331 * can find them. 332 */ 333/************0x00 series ***********/ 334#define SCTP_DATA 0x00 335#define SCTP_INITIATION 0x01 336#define SCTP_INITIATION_ACK 0x02 337#define SCTP_SELECTIVE_ACK 0x03 338#define SCTP_HEARTBEAT_REQUEST 0x04 339#define SCTP_HEARTBEAT_ACK 0x05 340#define SCTP_ABORT_ASSOCIATION 0x06 341#define SCTP_SHUTDOWN 0x07 342#define SCTP_SHUTDOWN_ACK 0x08 343#define SCTP_OPERATION_ERROR 0x09 344#define SCTP_COOKIE_ECHO 0x0a 345#define SCTP_COOKIE_ACK 0x0b 346#define SCTP_ECN_ECHO 0x0c 347#define SCTP_ECN_CWR 0x0d 348#define SCTP_SHUTDOWN_COMPLETE 0x0e 349/* draft-ietf-tsvwg-sctp-auth */ 350#define SCTP_AUTHENTICATION 0x0f 351/************0x40 series ***********/ 352/************0x80 series ***********/ 353/* draft-ietf-tsvwg-addip-sctp */ 354#define SCTP_ASCONF_ACK 0x80 355/* draft-ietf-stewart-pktdrpsctp */ 356#define SCTP_PACKET_DROPPED 0x81 357/* draft-ietf-stewart-strreset-xxx */ 358#define SCTP_STREAM_RESET 0x82 359/************0xc0 series ***********/ 360/* RFC3758 */ 361#define SCTP_FORWARD_CUM_TSN 0xc0 362/* draft-ietf-tsvwg-addip-sctp */ 363#define SCTP_ASCONF 0xc1 364 365 366/* ABORT and SHUTDOWN COMPLETE FLAG */ 367#define SCTP_HAD_NO_TCB 0x01 368 369/* Packet dropped flags */ 370#define SCTP_FROM_MIDDLE_BOX SCTP_HAD_NO_TCB 371#define SCTP_BADCRC 0x02 372#define SCTP_PACKET_TRUNCATED 0x04 373 374#define SCTP_SAT_NETWORK_MIN 400 /* min ms for RTT to set satellite 375 * time */ 376#define SCTP_SAT_NETWORK_BURST_INCR 2 /* how many times to multiply maxburst 377 * in sat */ 378 379/* Data Chuck Specific Flags */ 380#define SCTP_DATA_FRAG_MASK 0x03 381#define SCTP_DATA_MIDDLE_FRAG 0x00 382#define SCTP_DATA_LAST_FRAG 0x01 383#define SCTP_DATA_FIRST_FRAG 0x02 384#define SCTP_DATA_NOT_FRAG 0x03 385#define SCTP_DATA_UNORDERED 0x04 386 387/* ECN Nonce: SACK Chunk Specific Flags */ 388#define SCTP_SACK_NONCE_SUM 0x01 389 390/* CMT DAC algorithm SACK flag */ 391#define SCTP_SACK_CMT_DAC 0x80 392 393/* 394 * PCB flags (in sctp_flags bitmask). 395 * Note the features and flags are meant 396 * for use by netstat. 397 */ 398#define SCTP_PCB_FLAGS_UDPTYPE 0x00000001 399#define SCTP_PCB_FLAGS_TCPTYPE 0x00000002 400#define SCTP_PCB_FLAGS_BOUNDALL 0x00000004 401#define SCTP_PCB_FLAGS_ACCEPTING 0x00000008 402#define SCTP_PCB_FLAGS_UNBOUND 0x00000010 403#define SCTP_PCB_FLAGS_LISTENING 0x00000020 404#define SCTP_PCB_FLAGS_CLOSE_IP 0x00040000 405#define SCTP_PCB_FLAGS_WAS_CONNECTED 0x00080000 406#define SCTP_PCB_FLAGS_WAS_ABORTED 0x00100000 407/* TCP model support */ 408 409#define SCTP_PCB_FLAGS_CONNECTED 0x00200000 410#define SCTP_PCB_FLAGS_IN_TCPPOOL 0x00400000 411#define SCTP_PCB_FLAGS_DONT_WAKE 0x00800000 412#define SCTP_PCB_FLAGS_WAKEOUTPUT 0x01000000 413#define SCTP_PCB_FLAGS_WAKEINPUT 0x02000000 414#define SCTP_PCB_FLAGS_BOUND_V6 0x04000000 415#define SCTP_PCB_FLAGS_NEEDS_MAPPED_V4 0x08000000 416#define SCTP_PCB_FLAGS_BLOCKING_IO 0x10000000 417#define SCTP_PCB_FLAGS_SOCKET_GONE 0x20000000 418#define SCTP_PCB_FLAGS_SOCKET_ALLGONE 0x40000000 419/* flags to copy to new PCB */ 420#define SCTP_PCB_COPY_FLAGS 0x0e000004 421 422 423/* 424 * PCB Features (in sctp_features bitmask) 425 */ 426#define SCTP_PCB_FLAGS_EXT_RCVINFO 0x00000002 427#define SCTP_PCB_FLAGS_DONOT_HEARTBEAT 0x00000004 428#define SCTP_PCB_FLAGS_FRAG_INTERLEAVE 0x00000008 429#define SCTP_PCB_FLAGS_INTERLEAVE_STRMS 0x00000010 430#define SCTP_PCB_FLAGS_DO_ASCONF 0x00000020 431#define SCTP_PCB_FLAGS_AUTO_ASCONF 0x00000040 432#define SCTP_PCB_FLAGS_ZERO_COPY_ACTIVE 0x00000080 433 434/* socket options */ 435#define SCTP_PCB_FLAGS_NODELAY 0x00000100 436#define SCTP_PCB_FLAGS_AUTOCLOSE 0x00000200 437#define SCTP_PCB_FLAGS_RECVDATAIOEVNT 0x00000400 438#define SCTP_PCB_FLAGS_RECVASSOCEVNT 0x00000800 439#define SCTP_PCB_FLAGS_RECVPADDREVNT 0x00001000 440#define SCTP_PCB_FLAGS_RECVPEERERR 0x00002000 441#define SCTP_PCB_FLAGS_RECVSENDFAILEVNT 0x00004000 442#define SCTP_PCB_FLAGS_RECVSHUTDOWNEVNT 0x00008000 443#define SCTP_PCB_FLAGS_ADAPTATIONEVNT 0x00010000 444#define SCTP_PCB_FLAGS_PDAPIEVNT 0x00020000 445#define SCTP_PCB_FLAGS_AUTHEVNT 0x00040000 446#define SCTP_PCB_FLAGS_STREAM_RESETEVNT 0x00080000 447#define SCTP_PCB_FLAGS_NO_FRAGMENT 0x00100000 448#define SCTP_PCB_FLAGS_EXPLICIT_EOR 0x00400000 449 450#include <netinet/sctp_uio.h> 451 452#endif /* !_NETINET_SCTP_H_ */ 453