ieee80211_output.c revision 283313
1/*- 2 * Copyright (c) 2001 Atsushi Onoe 3 * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27#include <sys/cdefs.h> 28__FBSDID("$FreeBSD: head/sys/net80211/ieee80211_output.c 283313 2015-05-23 09:49:40Z ae $"); 29 30#include "opt_inet.h" 31#include "opt_inet6.h" 32#include "opt_wlan.h" 33 34#include <sys/param.h> 35#include <sys/systm.h> 36#include <sys/mbuf.h> 37#include <sys/kernel.h> 38#include <sys/endian.h> 39 40#include <sys/socket.h> 41 42#include <net/bpf.h> 43#include <net/ethernet.h> 44#include <net/if.h> 45#include <net/if_var.h> 46#include <net/if_llc.h> 47#include <net/if_media.h> 48#include <net/if_vlan_var.h> 49 50#include <net80211/ieee80211_var.h> 51#include <net80211/ieee80211_regdomain.h> 52#ifdef IEEE80211_SUPPORT_SUPERG 53#include <net80211/ieee80211_superg.h> 54#endif 55#ifdef IEEE80211_SUPPORT_TDMA 56#include <net80211/ieee80211_tdma.h> 57#endif 58#include <net80211/ieee80211_wds.h> 59#include <net80211/ieee80211_mesh.h> 60 61#if defined(INET) || defined(INET6) 62#include <netinet/in.h> 63#endif 64 65#ifdef INET 66#include <netinet/if_ether.h> 67#include <netinet/in_systm.h> 68#include <netinet/ip.h> 69#endif 70#ifdef INET6 71#include <netinet/ip6.h> 72#endif 73 74#include <security/mac/mac_framework.h> 75 76#define ETHER_HEADER_COPY(dst, src) \ 77 memcpy(dst, src, sizeof(struct ether_header)) 78 79/* unalligned little endian access */ 80#define LE_WRITE_2(p, v) do { \ 81 ((uint8_t *)(p))[0] = (v) & 0xff; \ 82 ((uint8_t *)(p))[1] = ((v) >> 8) & 0xff; \ 83} while (0) 84#define LE_WRITE_4(p, v) do { \ 85 ((uint8_t *)(p))[0] = (v) & 0xff; \ 86 ((uint8_t *)(p))[1] = ((v) >> 8) & 0xff; \ 87 ((uint8_t *)(p))[2] = ((v) >> 16) & 0xff; \ 88 ((uint8_t *)(p))[3] = ((v) >> 24) & 0xff; \ 89} while (0) 90 91static int ieee80211_fragment(struct ieee80211vap *, struct mbuf *, 92 u_int hdrsize, u_int ciphdrsize, u_int mtu); 93static void ieee80211_tx_mgt_cb(struct ieee80211_node *, void *, int); 94 95#ifdef IEEE80211_DEBUG 96/* 97 * Decide if an outbound management frame should be 98 * printed when debugging is enabled. This filters some 99 * of the less interesting frames that come frequently 100 * (e.g. beacons). 101 */ 102static __inline int 103doprint(struct ieee80211vap *vap, int subtype) 104{ 105 switch (subtype) { 106 case IEEE80211_FC0_SUBTYPE_PROBE_RESP: 107 return (vap->iv_opmode == IEEE80211_M_IBSS); 108 } 109 return 1; 110} 111#endif 112 113/* 114 * Transmit a frame to the given destination on the given VAP. 115 * 116 * It's up to the caller to figure out the details of who this 117 * is going to and resolving the node. 118 * 119 * This routine takes care of queuing it for power save, 120 * A-MPDU state stuff, fast-frames state stuff, encapsulation 121 * if required, then passing it up to the driver layer. 122 * 123 * This routine (for now) consumes the mbuf and frees the node 124 * reference; it ideally will return a TX status which reflects 125 * whether the mbuf was consumed or not, so the caller can 126 * free the mbuf (if appropriate) and the node reference (again, 127 * if appropriate.) 128 */ 129int 130ieee80211_vap_pkt_send_dest(struct ieee80211vap *vap, struct mbuf *m, 131 struct ieee80211_node *ni) 132{ 133 struct ieee80211com *ic = vap->iv_ic; 134 struct ifnet *ifp = vap->iv_ifp; 135 int error, len, mcast; 136 137 if ((ni->ni_flags & IEEE80211_NODE_PWR_MGT) && 138 (m->m_flags & M_PWR_SAV) == 0) { 139 /* 140 * Station in power save mode; pass the frame 141 * to the 802.11 layer and continue. We'll get 142 * the frame back when the time is right. 143 * XXX lose WDS vap linkage? 144 */ 145 if (ieee80211_pwrsave(ni, m) != 0) 146 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 147 ieee80211_free_node(ni); 148 149 /* 150 * We queued it fine, so tell the upper layer 151 * that we consumed it. 152 */ 153 return (0); 154 } 155 /* calculate priority so drivers can find the tx queue */ 156 if (ieee80211_classify(ni, m)) { 157 IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_OUTPUT, 158 ni->ni_macaddr, NULL, 159 "%s", "classification failure"); 160 vap->iv_stats.is_tx_classify++; 161 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 162 m_freem(m); 163 ieee80211_free_node(ni); 164 165 /* XXX better status? */ 166 return (0); 167 } 168 /* 169 * Stash the node pointer. Note that we do this after 170 * any call to ieee80211_dwds_mcast because that code 171 * uses any existing value for rcvif to identify the 172 * interface it (might have been) received on. 173 */ 174 m->m_pkthdr.rcvif = (void *)ni; 175 mcast = (m->m_flags & (M_MCAST | M_BCAST)) ? 1: 0; 176 len = m->m_pkthdr.len; 177 178 BPF_MTAP(ifp, m); /* 802.3 tx */ 179 180 /* 181 * Check if A-MPDU tx aggregation is setup or if we 182 * should try to enable it. The sta must be associated 183 * with HT and A-MPDU enabled for use. When the policy 184 * routine decides we should enable A-MPDU we issue an 185 * ADDBA request and wait for a reply. The frame being 186 * encapsulated will go out w/o using A-MPDU, or possibly 187 * it might be collected by the driver and held/retransmit. 188 * The default ic_ampdu_enable routine handles staggering 189 * ADDBA requests in case the receiver NAK's us or we are 190 * otherwise unable to establish a BA stream. 191 */ 192 if ((ni->ni_flags & IEEE80211_NODE_AMPDU_TX) && 193 (vap->iv_flags_ht & IEEE80211_FHT_AMPDU_TX) && 194 (m->m_flags & M_EAPOL) == 0) { 195 int tid = WME_AC_TO_TID(M_WME_GETAC(m)); 196 struct ieee80211_tx_ampdu *tap = &ni->ni_tx_ampdu[tid]; 197 198 ieee80211_txampdu_count_packet(tap); 199 if (IEEE80211_AMPDU_RUNNING(tap)) { 200 /* 201 * Operational, mark frame for aggregation. 202 * 203 * XXX do tx aggregation here 204 */ 205 m->m_flags |= M_AMPDU_MPDU; 206 } else if (!IEEE80211_AMPDU_REQUESTED(tap) && 207 ic->ic_ampdu_enable(ni, tap)) { 208 /* 209 * Not negotiated yet, request service. 210 */ 211 ieee80211_ampdu_request(ni, tap); 212 /* XXX hold frame for reply? */ 213 } 214 } 215 216#ifdef IEEE80211_SUPPORT_SUPERG 217 else if (IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_FF)) { 218 m = ieee80211_ff_check(ni, m); 219 if (m == NULL) { 220 /* NB: any ni ref held on stageq */ 221 return (0); 222 } 223 } 224#endif /* IEEE80211_SUPPORT_SUPERG */ 225 226 /* 227 * Grab the TX lock - serialise the TX process from this 228 * point (where TX state is being checked/modified) 229 * through to driver queue. 230 */ 231 IEEE80211_TX_LOCK(ic); 232 233 if (__predict_true((vap->iv_caps & IEEE80211_C_8023ENCAP) == 0)) { 234 /* 235 * Encapsulate the packet in prep for transmission. 236 */ 237 m = ieee80211_encap(vap, ni, m); 238 if (m == NULL) { 239 /* NB: stat+msg handled in ieee80211_encap */ 240 IEEE80211_TX_UNLOCK(ic); 241 ieee80211_free_node(ni); 242 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 243 return (ENOBUFS); 244 } 245 } 246 error = ieee80211_parent_xmitpkt(ic, m); 247 248 /* 249 * Unlock at this point - no need to hold it across 250 * ieee80211_free_node() (ie, the comlock) 251 */ 252 IEEE80211_TX_UNLOCK(ic); 253 if (error != 0) { 254 /* NB: IFQ_HANDOFF reclaims mbuf */ 255 ieee80211_free_node(ni); 256 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 257 } else { 258 if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1); 259 if_inc_counter(ifp, IFCOUNTER_OMCASTS, mcast); 260 if_inc_counter(ifp, IFCOUNTER_OBYTES, len); 261 } 262 ic->ic_lastdata = ticks; 263 264 return (0); 265} 266 267 268 269/* 270 * Send the given mbuf through the given vap. 271 * 272 * This consumes the mbuf regardless of whether the transmit 273 * was successful or not. 274 * 275 * This does none of the initial checks that ieee80211_start() 276 * does (eg CAC timeout, interface wakeup) - the caller must 277 * do this first. 278 */ 279static int 280ieee80211_start_pkt(struct ieee80211vap *vap, struct mbuf *m) 281{ 282#define IS_DWDS(vap) \ 283 (vap->iv_opmode == IEEE80211_M_WDS && \ 284 (vap->iv_flags_ext & IEEE80211_FEXT_WDSLEGACY) == 0) 285 struct ieee80211com *ic = vap->iv_ic; 286 struct ifnet *ifp = vap->iv_ifp; 287 struct ieee80211_node *ni; 288 struct ether_header *eh; 289 290 /* 291 * Cancel any background scan. 292 */ 293 if (ic->ic_flags & IEEE80211_F_SCAN) 294 ieee80211_cancel_anyscan(vap); 295 /* 296 * Find the node for the destination so we can do 297 * things like power save and fast frames aggregation. 298 * 299 * NB: past this point various code assumes the first 300 * mbuf has the 802.3 header present (and contiguous). 301 */ 302 ni = NULL; 303 if (m->m_len < sizeof(struct ether_header) && 304 (m = m_pullup(m, sizeof(struct ether_header))) == NULL) { 305 IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, 306 "discard frame, %s\n", "m_pullup failed"); 307 vap->iv_stats.is_tx_nobuf++; /* XXX */ 308 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 309 return (ENOBUFS); 310 } 311 eh = mtod(m, struct ether_header *); 312 if (ETHER_IS_MULTICAST(eh->ether_dhost)) { 313 if (IS_DWDS(vap)) { 314 /* 315 * Only unicast frames from the above go out 316 * DWDS vaps; multicast frames are handled by 317 * dispatching the frame as it comes through 318 * the AP vap (see below). 319 */ 320 IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_WDS, 321 eh->ether_dhost, "mcast", "%s", "on DWDS"); 322 vap->iv_stats.is_dwds_mcast++; 323 m_freem(m); 324 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 325 /* XXX better status? */ 326 return (ENOBUFS); 327 } 328 if (vap->iv_opmode == IEEE80211_M_HOSTAP) { 329 /* 330 * Spam DWDS vap's w/ multicast traffic. 331 */ 332 /* XXX only if dwds in use? */ 333 ieee80211_dwds_mcast(vap, m); 334 } 335 } 336#ifdef IEEE80211_SUPPORT_MESH 337 if (vap->iv_opmode != IEEE80211_M_MBSS) { 338#endif 339 ni = ieee80211_find_txnode(vap, eh->ether_dhost); 340 if (ni == NULL) { 341 /* NB: ieee80211_find_txnode does stat+msg */ 342 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 343 m_freem(m); 344 /* XXX better status? */ 345 return (ENOBUFS); 346 } 347 if (ni->ni_associd == 0 && 348 (ni->ni_flags & IEEE80211_NODE_ASSOCID)) { 349 IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_OUTPUT, 350 eh->ether_dhost, NULL, 351 "sta not associated (type 0x%04x)", 352 htons(eh->ether_type)); 353 vap->iv_stats.is_tx_notassoc++; 354 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 355 m_freem(m); 356 ieee80211_free_node(ni); 357 /* XXX better status? */ 358 return (ENOBUFS); 359 } 360#ifdef IEEE80211_SUPPORT_MESH 361 } else { 362 if (!IEEE80211_ADDR_EQ(eh->ether_shost, vap->iv_myaddr)) { 363 /* 364 * Proxy station only if configured. 365 */ 366 if (!ieee80211_mesh_isproxyena(vap)) { 367 IEEE80211_DISCARD_MAC(vap, 368 IEEE80211_MSG_OUTPUT | 369 IEEE80211_MSG_MESH, 370 eh->ether_dhost, NULL, 371 "%s", "proxy not enabled"); 372 vap->iv_stats.is_mesh_notproxy++; 373 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 374 m_freem(m); 375 /* XXX better status? */ 376 return (ENOBUFS); 377 } 378 IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, 379 "forward frame from DS SA(%6D), DA(%6D)\n", 380 eh->ether_shost, ":", 381 eh->ether_dhost, ":"); 382 ieee80211_mesh_proxy_check(vap, eh->ether_shost); 383 } 384 ni = ieee80211_mesh_discover(vap, eh->ether_dhost, m); 385 if (ni == NULL) { 386 /* 387 * NB: ieee80211_mesh_discover holds/disposes 388 * frame (e.g. queueing on path discovery). 389 */ 390 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 391 /* XXX better status? */ 392 return (ENOBUFS); 393 } 394 } 395#endif 396 397 /* 398 * We've resolved the sender, so attempt to transmit it. 399 */ 400 401 if (vap->iv_state == IEEE80211_S_SLEEP) { 402 /* 403 * In power save; queue frame and then wakeup device 404 * for transmit. 405 */ 406 ic->ic_lastdata = ticks; 407 if (ieee80211_pwrsave(ni, m) != 0) 408 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 409 ieee80211_free_node(ni); 410 ieee80211_new_state(vap, IEEE80211_S_RUN, 0); 411 return (0); 412 } 413 414 if (ieee80211_vap_pkt_send_dest(vap, m, ni) != 0) 415 return (ENOBUFS); 416 return (0); 417#undef IS_DWDS 418} 419 420/* 421 * Start method for vap's. All packets from the stack come 422 * through here. We handle common processing of the packets 423 * before dispatching them to the underlying device. 424 * 425 * if_transmit() requires that the mbuf be consumed by this call 426 * regardless of the return condition. 427 */ 428int 429ieee80211_vap_transmit(struct ifnet *ifp, struct mbuf *m) 430{ 431 struct ieee80211vap *vap = ifp->if_softc; 432 struct ieee80211com *ic = vap->iv_ic; 433 struct ifnet *parent = ic->ic_ifp; 434 435 /* NB: parent must be up and running */ 436 if (!IFNET_IS_UP_RUNNING(parent)) { 437 IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, 438 "%s: ignore queue, parent %s not up+running\n", 439 __func__, parent->if_xname); 440 m_freem(m); 441 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 442 return (ENETDOWN); 443 } 444 445 /* 446 * No data frames go out unless we're running. 447 * Note in particular this covers CAC and CSA 448 * states (though maybe we should check muting 449 * for CSA). 450 */ 451 if (vap->iv_state != IEEE80211_S_RUN && 452 vap->iv_state != IEEE80211_S_SLEEP) { 453 IEEE80211_LOCK(ic); 454 /* re-check under the com lock to avoid races */ 455 if (vap->iv_state != IEEE80211_S_RUN && 456 vap->iv_state != IEEE80211_S_SLEEP) { 457 IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, 458 "%s: ignore queue, in %s state\n", 459 __func__, ieee80211_state_name[vap->iv_state]); 460 vap->iv_stats.is_tx_badstate++; 461 IEEE80211_UNLOCK(ic); 462 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 463 m_freem(m); 464 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 465 return (ENETDOWN); 466 } 467 IEEE80211_UNLOCK(ic); 468 } 469 470 /* 471 * Sanitize mbuf flags for net80211 use. We cannot 472 * clear M_PWR_SAV or M_MORE_DATA because these may 473 * be set for frames that are re-submitted from the 474 * power save queue. 475 * 476 * NB: This must be done before ieee80211_classify as 477 * it marks EAPOL in frames with M_EAPOL. 478 */ 479 m->m_flags &= ~(M_80211_TX - M_PWR_SAV - M_MORE_DATA); 480 481 /* 482 * Bump to the packet transmission path. 483 * The mbuf will be consumed here. 484 */ 485 return (ieee80211_start_pkt(vap, m)); 486} 487 488void 489ieee80211_vap_qflush(struct ifnet *ifp) 490{ 491 492 /* Empty for now */ 493} 494 495/* 496 * 802.11 raw output routine. 497 * 498 * XXX TODO: this (and other send routines) should correctly 499 * XXX keep the pwr mgmt bit set if it decides to call into the 500 * XXX driver to send a frame whilst the state is SLEEP. 501 * 502 * Otherwise the peer may decide that we're awake and flood us 503 * with traffic we are still too asleep to receive! 504 */ 505int 506ieee80211_raw_output(struct ieee80211vap *vap, struct ieee80211_node *ni, 507 struct mbuf *m, const struct ieee80211_bpf_params *params) 508{ 509 struct ieee80211com *ic = vap->iv_ic; 510 511 return (ic->ic_raw_xmit(ni, m, params)); 512} 513 514/* 515 * 802.11 output routine. This is (currently) used only to 516 * connect bpf write calls to the 802.11 layer for injecting 517 * raw 802.11 frames. 518 */ 519#if __FreeBSD_version >= 1000031 520int 521ieee80211_output(struct ifnet *ifp, struct mbuf *m, 522 const struct sockaddr *dst, struct route *ro) 523#else 524int 525ieee80211_output(struct ifnet *ifp, struct mbuf *m, 526 struct sockaddr *dst, struct route *ro) 527#endif 528{ 529#define senderr(e) do { error = (e); goto bad;} while (0) 530 struct ieee80211_node *ni = NULL; 531 struct ieee80211vap *vap; 532 struct ieee80211_frame *wh; 533 struct ieee80211com *ic = NULL; 534 int error; 535 int ret; 536 537 if (ifp->if_drv_flags & IFF_DRV_OACTIVE) { 538 /* 539 * Short-circuit requests if the vap is marked OACTIVE 540 * as this can happen because a packet came down through 541 * ieee80211_start before the vap entered RUN state in 542 * which case it's ok to just drop the frame. This 543 * should not be necessary but callers of if_output don't 544 * check OACTIVE. 545 */ 546 senderr(ENETDOWN); 547 } 548 vap = ifp->if_softc; 549 ic = vap->iv_ic; 550 /* 551 * Hand to the 802.3 code if not tagged as 552 * a raw 802.11 frame. 553 */ 554 if (dst->sa_family != AF_IEEE80211) 555 return vap->iv_output(ifp, m, dst, ro); 556#ifdef MAC 557 error = mac_ifnet_check_transmit(ifp, m); 558 if (error) 559 senderr(error); 560#endif 561 if (ifp->if_flags & IFF_MONITOR) 562 senderr(ENETDOWN); 563 if (!IFNET_IS_UP_RUNNING(ifp)) 564 senderr(ENETDOWN); 565 if (vap->iv_state == IEEE80211_S_CAC) { 566 IEEE80211_DPRINTF(vap, 567 IEEE80211_MSG_OUTPUT | IEEE80211_MSG_DOTH, 568 "block %s frame in CAC state\n", "raw data"); 569 vap->iv_stats.is_tx_badstate++; 570 senderr(EIO); /* XXX */ 571 } else if (vap->iv_state == IEEE80211_S_SCAN) 572 senderr(EIO); 573 /* XXX bypass bridge, pfil, carp, etc. */ 574 575 if (m->m_pkthdr.len < sizeof(struct ieee80211_frame_ack)) 576 senderr(EIO); /* XXX */ 577 wh = mtod(m, struct ieee80211_frame *); 578 if ((wh->i_fc[0] & IEEE80211_FC0_VERSION_MASK) != 579 IEEE80211_FC0_VERSION_0) 580 senderr(EIO); /* XXX */ 581 582 /* locate destination node */ 583 switch (wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) { 584 case IEEE80211_FC1_DIR_NODS: 585 case IEEE80211_FC1_DIR_FROMDS: 586 ni = ieee80211_find_txnode(vap, wh->i_addr1); 587 break; 588 case IEEE80211_FC1_DIR_TODS: 589 case IEEE80211_FC1_DIR_DSTODS: 590 if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) 591 senderr(EIO); /* XXX */ 592 ni = ieee80211_find_txnode(vap, wh->i_addr3); 593 break; 594 default: 595 senderr(EIO); /* XXX */ 596 } 597 if (ni == NULL) { 598 /* 599 * Permit packets w/ bpf params through regardless 600 * (see below about sa_len). 601 */ 602 if (dst->sa_len == 0) 603 senderr(EHOSTUNREACH); 604 ni = ieee80211_ref_node(vap->iv_bss); 605 } 606 607 /* 608 * Sanitize mbuf for net80211 flags leaked from above. 609 * 610 * NB: This must be done before ieee80211_classify as 611 * it marks EAPOL in frames with M_EAPOL. 612 */ 613 m->m_flags &= ~M_80211_TX; 614 615 /* calculate priority so drivers can find the tx queue */ 616 /* XXX assumes an 802.3 frame */ 617 if (ieee80211_classify(ni, m)) 618 senderr(EIO); /* XXX */ 619 620 if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1); 621 IEEE80211_NODE_STAT(ni, tx_data); 622 if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { 623 IEEE80211_NODE_STAT(ni, tx_mcast); 624 m->m_flags |= M_MCAST; 625 } else 626 IEEE80211_NODE_STAT(ni, tx_ucast); 627 /* NB: ieee80211_encap does not include 802.11 header */ 628 IEEE80211_NODE_STAT_ADD(ni, tx_bytes, m->m_pkthdr.len); 629 630 IEEE80211_TX_LOCK(ic); 631 632 /* 633 * NB: DLT_IEEE802_11_RADIO identifies the parameters are 634 * present by setting the sa_len field of the sockaddr (yes, 635 * this is a hack). 636 * NB: we assume sa_data is suitably aligned to cast. 637 */ 638 ret = ieee80211_raw_output(vap, ni, m, 639 (const struct ieee80211_bpf_params *)(dst->sa_len ? 640 dst->sa_data : NULL)); 641 IEEE80211_TX_UNLOCK(ic); 642 return (ret); 643bad: 644 if (m != NULL) 645 m_freem(m); 646 if (ni != NULL) 647 ieee80211_free_node(ni); 648 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 649 return error; 650#undef senderr 651} 652 653/* 654 * Set the direction field and address fields of an outgoing 655 * frame. Note this should be called early on in constructing 656 * a frame as it sets i_fc[1]; other bits can then be or'd in. 657 */ 658void 659ieee80211_send_setup( 660 struct ieee80211_node *ni, 661 struct mbuf *m, 662 int type, int tid, 663 const uint8_t sa[IEEE80211_ADDR_LEN], 664 const uint8_t da[IEEE80211_ADDR_LEN], 665 const uint8_t bssid[IEEE80211_ADDR_LEN]) 666{ 667#define WH4(wh) ((struct ieee80211_frame_addr4 *)wh) 668 struct ieee80211vap *vap = ni->ni_vap; 669 struct ieee80211_tx_ampdu *tap; 670 struct ieee80211_frame *wh = mtod(m, struct ieee80211_frame *); 671 ieee80211_seq seqno; 672 673 IEEE80211_TX_LOCK_ASSERT(ni->ni_ic); 674 675 wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | type; 676 if ((type & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_DATA) { 677 switch (vap->iv_opmode) { 678 case IEEE80211_M_STA: 679 wh->i_fc[1] = IEEE80211_FC1_DIR_TODS; 680 IEEE80211_ADDR_COPY(wh->i_addr1, bssid); 681 IEEE80211_ADDR_COPY(wh->i_addr2, sa); 682 IEEE80211_ADDR_COPY(wh->i_addr3, da); 683 break; 684 case IEEE80211_M_IBSS: 685 case IEEE80211_M_AHDEMO: 686 wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; 687 IEEE80211_ADDR_COPY(wh->i_addr1, da); 688 IEEE80211_ADDR_COPY(wh->i_addr2, sa); 689 IEEE80211_ADDR_COPY(wh->i_addr3, bssid); 690 break; 691 case IEEE80211_M_HOSTAP: 692 wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS; 693 IEEE80211_ADDR_COPY(wh->i_addr1, da); 694 IEEE80211_ADDR_COPY(wh->i_addr2, bssid); 695 IEEE80211_ADDR_COPY(wh->i_addr3, sa); 696 break; 697 case IEEE80211_M_WDS: 698 wh->i_fc[1] = IEEE80211_FC1_DIR_DSTODS; 699 IEEE80211_ADDR_COPY(wh->i_addr1, da); 700 IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); 701 IEEE80211_ADDR_COPY(wh->i_addr3, da); 702 IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, sa); 703 break; 704 case IEEE80211_M_MBSS: 705#ifdef IEEE80211_SUPPORT_MESH 706 if (IEEE80211_IS_MULTICAST(da)) { 707 wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS; 708 /* XXX next hop */ 709 IEEE80211_ADDR_COPY(wh->i_addr1, da); 710 IEEE80211_ADDR_COPY(wh->i_addr2, 711 vap->iv_myaddr); 712 } else { 713 wh->i_fc[1] = IEEE80211_FC1_DIR_DSTODS; 714 IEEE80211_ADDR_COPY(wh->i_addr1, da); 715 IEEE80211_ADDR_COPY(wh->i_addr2, 716 vap->iv_myaddr); 717 IEEE80211_ADDR_COPY(wh->i_addr3, da); 718 IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, sa); 719 } 720#endif 721 break; 722 case IEEE80211_M_MONITOR: /* NB: to quiet compiler */ 723 break; 724 } 725 } else { 726 wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; 727 IEEE80211_ADDR_COPY(wh->i_addr1, da); 728 IEEE80211_ADDR_COPY(wh->i_addr2, sa); 729#ifdef IEEE80211_SUPPORT_MESH 730 if (vap->iv_opmode == IEEE80211_M_MBSS) 731 IEEE80211_ADDR_COPY(wh->i_addr3, sa); 732 else 733#endif 734 IEEE80211_ADDR_COPY(wh->i_addr3, bssid); 735 } 736 *(uint16_t *)&wh->i_dur[0] = 0; 737 738 tap = &ni->ni_tx_ampdu[tid]; 739 if (tid != IEEE80211_NONQOS_TID && IEEE80211_AMPDU_RUNNING(tap)) 740 m->m_flags |= M_AMPDU_MPDU; 741 else { 742 if (IEEE80211_HAS_SEQ(type & IEEE80211_FC0_TYPE_MASK, 743 type & IEEE80211_FC0_SUBTYPE_MASK)) 744 seqno = ni->ni_txseqs[tid]++; 745 else 746 seqno = 0; 747 748 *(uint16_t *)&wh->i_seq[0] = 749 htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT); 750 M_SEQNO_SET(m, seqno); 751 } 752 753 if (IEEE80211_IS_MULTICAST(wh->i_addr1)) 754 m->m_flags |= M_MCAST; 755#undef WH4 756} 757 758/* 759 * Send a management frame to the specified node. The node pointer 760 * must have a reference as the pointer will be passed to the driver 761 * and potentially held for a long time. If the frame is successfully 762 * dispatched to the driver, then it is responsible for freeing the 763 * reference (and potentially free'ing up any associated storage); 764 * otherwise deal with reclaiming any reference (on error). 765 */ 766int 767ieee80211_mgmt_output(struct ieee80211_node *ni, struct mbuf *m, int type, 768 struct ieee80211_bpf_params *params) 769{ 770 struct ieee80211vap *vap = ni->ni_vap; 771 struct ieee80211com *ic = ni->ni_ic; 772 struct ieee80211_frame *wh; 773 int ret; 774 775 KASSERT(ni != NULL, ("null node")); 776 777 if (vap->iv_state == IEEE80211_S_CAC) { 778 IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT | IEEE80211_MSG_DOTH, 779 ni, "block %s frame in CAC state", 780 ieee80211_mgt_subtype_name[ 781 (type & IEEE80211_FC0_SUBTYPE_MASK) >> 782 IEEE80211_FC0_SUBTYPE_SHIFT]); 783 vap->iv_stats.is_tx_badstate++; 784 ieee80211_free_node(ni); 785 m_freem(m); 786 return EIO; /* XXX */ 787 } 788 789 M_PREPEND(m, sizeof(struct ieee80211_frame), M_NOWAIT); 790 if (m == NULL) { 791 ieee80211_free_node(ni); 792 return ENOMEM; 793 } 794 795 IEEE80211_TX_LOCK(ic); 796 797 wh = mtod(m, struct ieee80211_frame *); 798 ieee80211_send_setup(ni, m, 799 IEEE80211_FC0_TYPE_MGT | type, IEEE80211_NONQOS_TID, 800 vap->iv_myaddr, ni->ni_macaddr, ni->ni_bssid); 801 if (params->ibp_flags & IEEE80211_BPF_CRYPTO) { 802 IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_AUTH, wh->i_addr1, 803 "encrypting frame (%s)", __func__); 804 wh->i_fc[1] |= IEEE80211_FC1_PROTECTED; 805 } 806 m->m_flags |= M_ENCAP; /* mark encapsulated */ 807 808 KASSERT(type != IEEE80211_FC0_SUBTYPE_PROBE_RESP, ("probe response?")); 809 M_WME_SETAC(m, params->ibp_pri); 810 811#ifdef IEEE80211_DEBUG 812 /* avoid printing too many frames */ 813 if ((ieee80211_msg_debug(vap) && doprint(vap, type)) || 814 ieee80211_msg_dumppkts(vap)) { 815 printf("[%s] send %s on channel %u\n", 816 ether_sprintf(wh->i_addr1), 817 ieee80211_mgt_subtype_name[ 818 (type & IEEE80211_FC0_SUBTYPE_MASK) >> 819 IEEE80211_FC0_SUBTYPE_SHIFT], 820 ieee80211_chan2ieee(ic, ic->ic_curchan)); 821 } 822#endif 823 IEEE80211_NODE_STAT(ni, tx_mgmt); 824 825 ret = ieee80211_raw_output(vap, ni, m, params); 826 IEEE80211_TX_UNLOCK(ic); 827 return (ret); 828} 829 830/* 831 * Send a null data frame to the specified node. If the station 832 * is setup for QoS then a QoS Null Data frame is constructed. 833 * If this is a WDS station then a 4-address frame is constructed. 834 * 835 * NB: the caller is assumed to have setup a node reference 836 * for use; this is necessary to deal with a race condition 837 * when probing for inactive stations. Like ieee80211_mgmt_output 838 * we must cleanup any node reference on error; however we 839 * can safely just unref it as we know it will never be the 840 * last reference to the node. 841 */ 842int 843ieee80211_send_nulldata(struct ieee80211_node *ni) 844{ 845 struct ieee80211vap *vap = ni->ni_vap; 846 struct ieee80211com *ic = ni->ni_ic; 847 struct mbuf *m; 848 struct ieee80211_frame *wh; 849 int hdrlen; 850 uint8_t *frm; 851 int ret; 852 853 if (vap->iv_state == IEEE80211_S_CAC) { 854 IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT | IEEE80211_MSG_DOTH, 855 ni, "block %s frame in CAC state", "null data"); 856 ieee80211_unref_node(&ni); 857 vap->iv_stats.is_tx_badstate++; 858 return EIO; /* XXX */ 859 } 860 861 if (ni->ni_flags & (IEEE80211_NODE_QOS|IEEE80211_NODE_HT)) 862 hdrlen = sizeof(struct ieee80211_qosframe); 863 else 864 hdrlen = sizeof(struct ieee80211_frame); 865 /* NB: only WDS vap's get 4-address frames */ 866 if (vap->iv_opmode == IEEE80211_M_WDS) 867 hdrlen += IEEE80211_ADDR_LEN; 868 if (ic->ic_flags & IEEE80211_F_DATAPAD) 869 hdrlen = roundup(hdrlen, sizeof(uint32_t)); 870 871 m = ieee80211_getmgtframe(&frm, ic->ic_headroom + hdrlen, 0); 872 if (m == NULL) { 873 /* XXX debug msg */ 874 ieee80211_unref_node(&ni); 875 vap->iv_stats.is_tx_nobuf++; 876 return ENOMEM; 877 } 878 KASSERT(M_LEADINGSPACE(m) >= hdrlen, 879 ("leading space %zd", M_LEADINGSPACE(m))); 880 M_PREPEND(m, hdrlen, M_NOWAIT); 881 if (m == NULL) { 882 /* NB: cannot happen */ 883 ieee80211_free_node(ni); 884 return ENOMEM; 885 } 886 887 IEEE80211_TX_LOCK(ic); 888 889 wh = mtod(m, struct ieee80211_frame *); /* NB: a little lie */ 890 if (ni->ni_flags & IEEE80211_NODE_QOS) { 891 const int tid = WME_AC_TO_TID(WME_AC_BE); 892 uint8_t *qos; 893 894 ieee80211_send_setup(ni, m, 895 IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS_NULL, 896 tid, vap->iv_myaddr, ni->ni_macaddr, ni->ni_bssid); 897 898 if (vap->iv_opmode == IEEE80211_M_WDS) 899 qos = ((struct ieee80211_qosframe_addr4 *) wh)->i_qos; 900 else 901 qos = ((struct ieee80211_qosframe *) wh)->i_qos; 902 qos[0] = tid & IEEE80211_QOS_TID; 903 if (ic->ic_wme.wme_wmeChanParams.cap_wmeParams[WME_AC_BE].wmep_noackPolicy) 904 qos[0] |= IEEE80211_QOS_ACKPOLICY_NOACK; 905 qos[1] = 0; 906 } else { 907 ieee80211_send_setup(ni, m, 908 IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_NODATA, 909 IEEE80211_NONQOS_TID, 910 vap->iv_myaddr, ni->ni_macaddr, ni->ni_bssid); 911 } 912 if (vap->iv_opmode != IEEE80211_M_WDS) { 913 /* NB: power management bit is never sent by an AP */ 914 if ((ni->ni_flags & IEEE80211_NODE_PWR_MGT) && 915 vap->iv_opmode != IEEE80211_M_HOSTAP) 916 wh->i_fc[1] |= IEEE80211_FC1_PWR_MGT; 917 } 918 m->m_len = m->m_pkthdr.len = hdrlen; 919 m->m_flags |= M_ENCAP; /* mark encapsulated */ 920 921 M_WME_SETAC(m, WME_AC_BE); 922 923 IEEE80211_NODE_STAT(ni, tx_data); 924 925 IEEE80211_NOTE(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_DUMPPKTS, ni, 926 "send %snull data frame on channel %u, pwr mgt %s", 927 ni->ni_flags & IEEE80211_NODE_QOS ? "QoS " : "", 928 ieee80211_chan2ieee(ic, ic->ic_curchan), 929 wh->i_fc[1] & IEEE80211_FC1_PWR_MGT ? "ena" : "dis"); 930 931 ret = ieee80211_raw_output(vap, ni, m, NULL); 932 IEEE80211_TX_UNLOCK(ic); 933 return (ret); 934} 935 936/* 937 * Assign priority to a frame based on any vlan tag assigned 938 * to the station and/or any Diffserv setting in an IP header. 939 * Finally, if an ACM policy is setup (in station mode) it's 940 * applied. 941 */ 942int 943ieee80211_classify(struct ieee80211_node *ni, struct mbuf *m) 944{ 945 const struct ether_header *eh = mtod(m, struct ether_header *); 946 int v_wme_ac, d_wme_ac, ac; 947 948 /* 949 * Always promote PAE/EAPOL frames to high priority. 950 */ 951 if (eh->ether_type == htons(ETHERTYPE_PAE)) { 952 /* NB: mark so others don't need to check header */ 953 m->m_flags |= M_EAPOL; 954 ac = WME_AC_VO; 955 goto done; 956 } 957 /* 958 * Non-qos traffic goes to BE. 959 */ 960 if ((ni->ni_flags & IEEE80211_NODE_QOS) == 0) { 961 ac = WME_AC_BE; 962 goto done; 963 } 964 965 /* 966 * If node has a vlan tag then all traffic 967 * to it must have a matching tag. 968 */ 969 v_wme_ac = 0; 970 if (ni->ni_vlan != 0) { 971 if ((m->m_flags & M_VLANTAG) == 0) { 972 IEEE80211_NODE_STAT(ni, tx_novlantag); 973 return 1; 974 } 975 if (EVL_VLANOFTAG(m->m_pkthdr.ether_vtag) != 976 EVL_VLANOFTAG(ni->ni_vlan)) { 977 IEEE80211_NODE_STAT(ni, tx_vlanmismatch); 978 return 1; 979 } 980 /* map vlan priority to AC */ 981 v_wme_ac = TID_TO_WME_AC(EVL_PRIOFTAG(ni->ni_vlan)); 982 } 983 984 /* XXX m_copydata may be too slow for fast path */ 985#ifdef INET 986 if (eh->ether_type == htons(ETHERTYPE_IP)) { 987 uint8_t tos; 988 /* 989 * IP frame, map the DSCP bits from the TOS field. 990 */ 991 /* NB: ip header may not be in first mbuf */ 992 m_copydata(m, sizeof(struct ether_header) + 993 offsetof(struct ip, ip_tos), sizeof(tos), &tos); 994 tos >>= 5; /* NB: ECN + low 3 bits of DSCP */ 995 d_wme_ac = TID_TO_WME_AC(tos); 996 } else { 997#endif /* INET */ 998#ifdef INET6 999 if (eh->ether_type == htons(ETHERTYPE_IPV6)) { 1000 uint32_t flow; 1001 uint8_t tos; 1002 /* 1003 * IPv6 frame, map the DSCP bits from the traffic class field. 1004 */ 1005 m_copydata(m, sizeof(struct ether_header) + 1006 offsetof(struct ip6_hdr, ip6_flow), sizeof(flow), 1007 (caddr_t) &flow); 1008 tos = (uint8_t)(ntohl(flow) >> 20); 1009 tos >>= 5; /* NB: ECN + low 3 bits of DSCP */ 1010 d_wme_ac = TID_TO_WME_AC(tos); 1011 } else { 1012#endif /* INET6 */ 1013 d_wme_ac = WME_AC_BE; 1014#ifdef INET6 1015 } 1016#endif 1017#ifdef INET 1018 } 1019#endif 1020 /* 1021 * Use highest priority AC. 1022 */ 1023 if (v_wme_ac > d_wme_ac) 1024 ac = v_wme_ac; 1025 else 1026 ac = d_wme_ac; 1027 1028 /* 1029 * Apply ACM policy. 1030 */ 1031 if (ni->ni_vap->iv_opmode == IEEE80211_M_STA) { 1032 static const int acmap[4] = { 1033 WME_AC_BK, /* WME_AC_BE */ 1034 WME_AC_BK, /* WME_AC_BK */ 1035 WME_AC_BE, /* WME_AC_VI */ 1036 WME_AC_VI, /* WME_AC_VO */ 1037 }; 1038 struct ieee80211com *ic = ni->ni_ic; 1039 1040 while (ac != WME_AC_BK && 1041 ic->ic_wme.wme_wmeBssChanParams.cap_wmeParams[ac].wmep_acm) 1042 ac = acmap[ac]; 1043 } 1044done: 1045 M_WME_SETAC(m, ac); 1046 return 0; 1047} 1048 1049/* 1050 * Insure there is sufficient contiguous space to encapsulate the 1051 * 802.11 data frame. If room isn't already there, arrange for it. 1052 * Drivers and cipher modules assume we have done the necessary work 1053 * and fail rudely if they don't find the space they need. 1054 */ 1055struct mbuf * 1056ieee80211_mbuf_adjust(struct ieee80211vap *vap, int hdrsize, 1057 struct ieee80211_key *key, struct mbuf *m) 1058{ 1059#define TO_BE_RECLAIMED (sizeof(struct ether_header) - sizeof(struct llc)) 1060 int needed_space = vap->iv_ic->ic_headroom + hdrsize; 1061 1062 if (key != NULL) { 1063 /* XXX belongs in crypto code? */ 1064 needed_space += key->wk_cipher->ic_header; 1065 /* XXX frags */ 1066 /* 1067 * When crypto is being done in the host we must insure 1068 * the data are writable for the cipher routines; clone 1069 * a writable mbuf chain. 1070 * XXX handle SWMIC specially 1071 */ 1072 if (key->wk_flags & (IEEE80211_KEY_SWENCRYPT|IEEE80211_KEY_SWENMIC)) { 1073 m = m_unshare(m, M_NOWAIT); 1074 if (m == NULL) { 1075 IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, 1076 "%s: cannot get writable mbuf\n", __func__); 1077 vap->iv_stats.is_tx_nobuf++; /* XXX new stat */ 1078 return NULL; 1079 } 1080 } 1081 } 1082 /* 1083 * We know we are called just before stripping an Ethernet 1084 * header and prepending an LLC header. This means we know 1085 * there will be 1086 * sizeof(struct ether_header) - sizeof(struct llc) 1087 * bytes recovered to which we need additional space for the 1088 * 802.11 header and any crypto header. 1089 */ 1090 /* XXX check trailing space and copy instead? */ 1091 if (M_LEADINGSPACE(m) < needed_space - TO_BE_RECLAIMED) { 1092 struct mbuf *n = m_gethdr(M_NOWAIT, m->m_type); 1093 if (n == NULL) { 1094 IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, 1095 "%s: cannot expand storage\n", __func__); 1096 vap->iv_stats.is_tx_nobuf++; 1097 m_freem(m); 1098 return NULL; 1099 } 1100 KASSERT(needed_space <= MHLEN, 1101 ("not enough room, need %u got %d\n", needed_space, MHLEN)); 1102 /* 1103 * Setup new mbuf to have leading space to prepend the 1104 * 802.11 header and any crypto header bits that are 1105 * required (the latter are added when the driver calls 1106 * back to ieee80211_crypto_encap to do crypto encapsulation). 1107 */ 1108 /* NB: must be first 'cuz it clobbers m_data */ 1109 m_move_pkthdr(n, m); 1110 n->m_len = 0; /* NB: m_gethdr does not set */ 1111 n->m_data += needed_space; 1112 /* 1113 * Pull up Ethernet header to create the expected layout. 1114 * We could use m_pullup but that's overkill (i.e. we don't 1115 * need the actual data) and it cannot fail so do it inline 1116 * for speed. 1117 */ 1118 /* NB: struct ether_header is known to be contiguous */ 1119 n->m_len += sizeof(struct ether_header); 1120 m->m_len -= sizeof(struct ether_header); 1121 m->m_data += sizeof(struct ether_header); 1122 /* 1123 * Replace the head of the chain. 1124 */ 1125 n->m_next = m; 1126 m = n; 1127 } 1128 return m; 1129#undef TO_BE_RECLAIMED 1130} 1131 1132/* 1133 * Return the transmit key to use in sending a unicast frame. 1134 * If a unicast key is set we use that. When no unicast key is set 1135 * we fall back to the default transmit key. 1136 */ 1137static __inline struct ieee80211_key * 1138ieee80211_crypto_getucastkey(struct ieee80211vap *vap, 1139 struct ieee80211_node *ni) 1140{ 1141 if (IEEE80211_KEY_UNDEFINED(&ni->ni_ucastkey)) { 1142 if (vap->iv_def_txkey == IEEE80211_KEYIX_NONE || 1143 IEEE80211_KEY_UNDEFINED(&vap->iv_nw_keys[vap->iv_def_txkey])) 1144 return NULL; 1145 return &vap->iv_nw_keys[vap->iv_def_txkey]; 1146 } else { 1147 return &ni->ni_ucastkey; 1148 } 1149} 1150 1151/* 1152 * Return the transmit key to use in sending a multicast frame. 1153 * Multicast traffic always uses the group key which is installed as 1154 * the default tx key. 1155 */ 1156static __inline struct ieee80211_key * 1157ieee80211_crypto_getmcastkey(struct ieee80211vap *vap, 1158 struct ieee80211_node *ni) 1159{ 1160 if (vap->iv_def_txkey == IEEE80211_KEYIX_NONE || 1161 IEEE80211_KEY_UNDEFINED(&vap->iv_nw_keys[vap->iv_def_txkey])) 1162 return NULL; 1163 return &vap->iv_nw_keys[vap->iv_def_txkey]; 1164} 1165 1166/* 1167 * Encapsulate an outbound data frame. The mbuf chain is updated. 1168 * If an error is encountered NULL is returned. The caller is required 1169 * to provide a node reference and pullup the ethernet header in the 1170 * first mbuf. 1171 * 1172 * NB: Packet is assumed to be processed by ieee80211_classify which 1173 * marked EAPOL frames w/ M_EAPOL. 1174 */ 1175struct mbuf * 1176ieee80211_encap(struct ieee80211vap *vap, struct ieee80211_node *ni, 1177 struct mbuf *m) 1178{ 1179#define WH4(wh) ((struct ieee80211_frame_addr4 *)(wh)) 1180#define MC01(mc) ((struct ieee80211_meshcntl_ae01 *)mc) 1181 struct ieee80211com *ic = ni->ni_ic; 1182#ifdef IEEE80211_SUPPORT_MESH 1183 struct ieee80211_mesh_state *ms = vap->iv_mesh; 1184 struct ieee80211_meshcntl_ae10 *mc; 1185 struct ieee80211_mesh_route *rt = NULL; 1186 int dir = -1; 1187#endif 1188 struct ether_header eh; 1189 struct ieee80211_frame *wh; 1190 struct ieee80211_key *key; 1191 struct llc *llc; 1192 int hdrsize, hdrspace, datalen, addqos, txfrag, is4addr; 1193 ieee80211_seq seqno; 1194 int meshhdrsize, meshae; 1195 uint8_t *qos; 1196 1197 IEEE80211_TX_LOCK_ASSERT(ic); 1198 1199 /* 1200 * Copy existing Ethernet header to a safe place. The 1201 * rest of the code assumes it's ok to strip it when 1202 * reorganizing state for the final encapsulation. 1203 */ 1204 KASSERT(m->m_len >= sizeof(eh), ("no ethernet header!")); 1205 ETHER_HEADER_COPY(&eh, mtod(m, caddr_t)); 1206 1207 /* 1208 * Insure space for additional headers. First identify 1209 * transmit key to use in calculating any buffer adjustments 1210 * required. This is also used below to do privacy 1211 * encapsulation work. Then calculate the 802.11 header 1212 * size and any padding required by the driver. 1213 * 1214 * Note key may be NULL if we fall back to the default 1215 * transmit key and that is not set. In that case the 1216 * buffer may not be expanded as needed by the cipher 1217 * routines, but they will/should discard it. 1218 */ 1219 if (vap->iv_flags & IEEE80211_F_PRIVACY) { 1220 if (vap->iv_opmode == IEEE80211_M_STA || 1221 !IEEE80211_IS_MULTICAST(eh.ether_dhost) || 1222 (vap->iv_opmode == IEEE80211_M_WDS && 1223 (vap->iv_flags_ext & IEEE80211_FEXT_WDSLEGACY))) 1224 key = ieee80211_crypto_getucastkey(vap, ni); 1225 else 1226 key = ieee80211_crypto_getmcastkey(vap, ni); 1227 if (key == NULL && (m->m_flags & M_EAPOL) == 0) { 1228 IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_CRYPTO, 1229 eh.ether_dhost, 1230 "no default transmit key (%s) deftxkey %u", 1231 __func__, vap->iv_def_txkey); 1232 vap->iv_stats.is_tx_nodefkey++; 1233 goto bad; 1234 } 1235 } else 1236 key = NULL; 1237 /* 1238 * XXX Some ap's don't handle QoS-encapsulated EAPOL 1239 * frames so suppress use. This may be an issue if other 1240 * ap's require all data frames to be QoS-encapsulated 1241 * once negotiated in which case we'll need to make this 1242 * configurable. 1243 * NB: mesh data frames are QoS. 1244 */ 1245 addqos = ((ni->ni_flags & (IEEE80211_NODE_QOS|IEEE80211_NODE_HT)) || 1246 (vap->iv_opmode == IEEE80211_M_MBSS)) && 1247 (m->m_flags & M_EAPOL) == 0; 1248 if (addqos) 1249 hdrsize = sizeof(struct ieee80211_qosframe); 1250 else 1251 hdrsize = sizeof(struct ieee80211_frame); 1252#ifdef IEEE80211_SUPPORT_MESH 1253 if (vap->iv_opmode == IEEE80211_M_MBSS) { 1254 /* 1255 * Mesh data frames are encapsulated according to the 1256 * rules of Section 11B.8.5 (p.139 of D3.0 spec). 1257 * o Group Addressed data (aka multicast) originating 1258 * at the local sta are sent w/ 3-address format and 1259 * address extension mode 00 1260 * o Individually Addressed data (aka unicast) originating 1261 * at the local sta are sent w/ 4-address format and 1262 * address extension mode 00 1263 * o Group Addressed data forwarded from a non-mesh sta are 1264 * sent w/ 3-address format and address extension mode 01 1265 * o Individually Address data from another sta are sent 1266 * w/ 4-address format and address extension mode 10 1267 */ 1268 is4addr = 0; /* NB: don't use, disable */ 1269 if (!IEEE80211_IS_MULTICAST(eh.ether_dhost)) { 1270 rt = ieee80211_mesh_rt_find(vap, eh.ether_dhost); 1271 KASSERT(rt != NULL, ("route is NULL")); 1272 dir = IEEE80211_FC1_DIR_DSTODS; 1273 hdrsize += IEEE80211_ADDR_LEN; 1274 if (rt->rt_flags & IEEE80211_MESHRT_FLAGS_PROXY) { 1275 if (IEEE80211_ADDR_EQ(rt->rt_mesh_gate, 1276 vap->iv_myaddr)) { 1277 IEEE80211_NOTE_MAC(vap, 1278 IEEE80211_MSG_MESH, 1279 eh.ether_dhost, 1280 "%s", "trying to send to ourself"); 1281 goto bad; 1282 } 1283 meshae = IEEE80211_MESH_AE_10; 1284 meshhdrsize = 1285 sizeof(struct ieee80211_meshcntl_ae10); 1286 } else { 1287 meshae = IEEE80211_MESH_AE_00; 1288 meshhdrsize = 1289 sizeof(struct ieee80211_meshcntl); 1290 } 1291 } else { 1292 dir = IEEE80211_FC1_DIR_FROMDS; 1293 if (!IEEE80211_ADDR_EQ(eh.ether_shost, vap->iv_myaddr)) { 1294 /* proxy group */ 1295 meshae = IEEE80211_MESH_AE_01; 1296 meshhdrsize = 1297 sizeof(struct ieee80211_meshcntl_ae01); 1298 } else { 1299 /* group */ 1300 meshae = IEEE80211_MESH_AE_00; 1301 meshhdrsize = sizeof(struct ieee80211_meshcntl); 1302 } 1303 } 1304 } else { 1305#endif 1306 /* 1307 * 4-address frames need to be generated for: 1308 * o packets sent through a WDS vap (IEEE80211_M_WDS) 1309 * o packets sent through a vap marked for relaying 1310 * (e.g. a station operating with dynamic WDS) 1311 */ 1312 is4addr = vap->iv_opmode == IEEE80211_M_WDS || 1313 ((vap->iv_flags_ext & IEEE80211_FEXT_4ADDR) && 1314 !IEEE80211_ADDR_EQ(eh.ether_shost, vap->iv_myaddr)); 1315 if (is4addr) 1316 hdrsize += IEEE80211_ADDR_LEN; 1317 meshhdrsize = meshae = 0; 1318#ifdef IEEE80211_SUPPORT_MESH 1319 } 1320#endif 1321 /* 1322 * Honor driver DATAPAD requirement. 1323 */ 1324 if (ic->ic_flags & IEEE80211_F_DATAPAD) 1325 hdrspace = roundup(hdrsize, sizeof(uint32_t)); 1326 else 1327 hdrspace = hdrsize; 1328 1329 if (__predict_true((m->m_flags & M_FF) == 0)) { 1330 /* 1331 * Normal frame. 1332 */ 1333 m = ieee80211_mbuf_adjust(vap, hdrspace + meshhdrsize, key, m); 1334 if (m == NULL) { 1335 /* NB: ieee80211_mbuf_adjust handles msgs+statistics */ 1336 goto bad; 1337 } 1338 /* NB: this could be optimized 'cuz of ieee80211_mbuf_adjust */ 1339 m_adj(m, sizeof(struct ether_header) - sizeof(struct llc)); 1340 llc = mtod(m, struct llc *); 1341 llc->llc_dsap = llc->llc_ssap = LLC_SNAP_LSAP; 1342 llc->llc_control = LLC_UI; 1343 llc->llc_snap.org_code[0] = 0; 1344 llc->llc_snap.org_code[1] = 0; 1345 llc->llc_snap.org_code[2] = 0; 1346 llc->llc_snap.ether_type = eh.ether_type; 1347 } else { 1348#ifdef IEEE80211_SUPPORT_SUPERG 1349 /* 1350 * Aggregated frame. 1351 */ 1352 m = ieee80211_ff_encap(vap, m, hdrspace + meshhdrsize, key); 1353 if (m == NULL) 1354#endif 1355 goto bad; 1356 } 1357 datalen = m->m_pkthdr.len; /* NB: w/o 802.11 header */ 1358 1359 M_PREPEND(m, hdrspace + meshhdrsize, M_NOWAIT); 1360 if (m == NULL) { 1361 vap->iv_stats.is_tx_nobuf++; 1362 goto bad; 1363 } 1364 wh = mtod(m, struct ieee80211_frame *); 1365 wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_DATA; 1366 *(uint16_t *)wh->i_dur = 0; 1367 qos = NULL; /* NB: quiet compiler */ 1368 if (is4addr) { 1369 wh->i_fc[1] = IEEE80211_FC1_DIR_DSTODS; 1370 IEEE80211_ADDR_COPY(wh->i_addr1, ni->ni_macaddr); 1371 IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); 1372 IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_dhost); 1373 IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, eh.ether_shost); 1374 } else switch (vap->iv_opmode) { 1375 case IEEE80211_M_STA: 1376 wh->i_fc[1] = IEEE80211_FC1_DIR_TODS; 1377 IEEE80211_ADDR_COPY(wh->i_addr1, ni->ni_bssid); 1378 IEEE80211_ADDR_COPY(wh->i_addr2, eh.ether_shost); 1379 IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_dhost); 1380 break; 1381 case IEEE80211_M_IBSS: 1382 case IEEE80211_M_AHDEMO: 1383 wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; 1384 IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost); 1385 IEEE80211_ADDR_COPY(wh->i_addr2, eh.ether_shost); 1386 /* 1387 * NB: always use the bssid from iv_bss as the 1388 * neighbor's may be stale after an ibss merge 1389 */ 1390 IEEE80211_ADDR_COPY(wh->i_addr3, vap->iv_bss->ni_bssid); 1391 break; 1392 case IEEE80211_M_HOSTAP: 1393 wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS; 1394 IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost); 1395 IEEE80211_ADDR_COPY(wh->i_addr2, ni->ni_bssid); 1396 IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_shost); 1397 break; 1398#ifdef IEEE80211_SUPPORT_MESH 1399 case IEEE80211_M_MBSS: 1400 /* NB: offset by hdrspace to deal with DATAPAD */ 1401 mc = (struct ieee80211_meshcntl_ae10 *) 1402 (mtod(m, uint8_t *) + hdrspace); 1403 wh->i_fc[1] = dir; 1404 switch (meshae) { 1405 case IEEE80211_MESH_AE_00: /* no proxy */ 1406 mc->mc_flags = 0; 1407 if (dir == IEEE80211_FC1_DIR_DSTODS) { /* ucast */ 1408 IEEE80211_ADDR_COPY(wh->i_addr1, 1409 ni->ni_macaddr); 1410 IEEE80211_ADDR_COPY(wh->i_addr2, 1411 vap->iv_myaddr); 1412 IEEE80211_ADDR_COPY(wh->i_addr3, 1413 eh.ether_dhost); 1414 IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, 1415 eh.ether_shost); 1416 qos =((struct ieee80211_qosframe_addr4 *) 1417 wh)->i_qos; 1418 } else if (dir == IEEE80211_FC1_DIR_FROMDS) { 1419 /* mcast */ 1420 IEEE80211_ADDR_COPY(wh->i_addr1, 1421 eh.ether_dhost); 1422 IEEE80211_ADDR_COPY(wh->i_addr2, 1423 vap->iv_myaddr); 1424 IEEE80211_ADDR_COPY(wh->i_addr3, 1425 eh.ether_shost); 1426 qos = ((struct ieee80211_qosframe *) 1427 wh)->i_qos; 1428 } 1429 break; 1430 case IEEE80211_MESH_AE_01: /* mcast, proxy */ 1431 wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS; 1432 IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost); 1433 IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); 1434 IEEE80211_ADDR_COPY(wh->i_addr3, vap->iv_myaddr); 1435 mc->mc_flags = 1; 1436 IEEE80211_ADDR_COPY(MC01(mc)->mc_addr4, 1437 eh.ether_shost); 1438 qos = ((struct ieee80211_qosframe *) wh)->i_qos; 1439 break; 1440 case IEEE80211_MESH_AE_10: /* ucast, proxy */ 1441 KASSERT(rt != NULL, ("route is NULL")); 1442 IEEE80211_ADDR_COPY(wh->i_addr1, rt->rt_nexthop); 1443 IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); 1444 IEEE80211_ADDR_COPY(wh->i_addr3, rt->rt_mesh_gate); 1445 IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, vap->iv_myaddr); 1446 mc->mc_flags = IEEE80211_MESH_AE_10; 1447 IEEE80211_ADDR_COPY(mc->mc_addr5, eh.ether_dhost); 1448 IEEE80211_ADDR_COPY(mc->mc_addr6, eh.ether_shost); 1449 qos = ((struct ieee80211_qosframe_addr4 *) wh)->i_qos; 1450 break; 1451 default: 1452 KASSERT(0, ("meshae %d", meshae)); 1453 break; 1454 } 1455 mc->mc_ttl = ms->ms_ttl; 1456 ms->ms_seq++; 1457 LE_WRITE_4(mc->mc_seq, ms->ms_seq); 1458 break; 1459#endif 1460 case IEEE80211_M_WDS: /* NB: is4addr should always be true */ 1461 default: 1462 goto bad; 1463 } 1464 if (m->m_flags & M_MORE_DATA) 1465 wh->i_fc[1] |= IEEE80211_FC1_MORE_DATA; 1466 if (addqos) { 1467 int ac, tid; 1468 1469 if (is4addr) { 1470 qos = ((struct ieee80211_qosframe_addr4 *) wh)->i_qos; 1471 /* NB: mesh case handled earlier */ 1472 } else if (vap->iv_opmode != IEEE80211_M_MBSS) 1473 qos = ((struct ieee80211_qosframe *) wh)->i_qos; 1474 ac = M_WME_GETAC(m); 1475 /* map from access class/queue to 11e header priorty value */ 1476 tid = WME_AC_TO_TID(ac); 1477 qos[0] = tid & IEEE80211_QOS_TID; 1478 if (ic->ic_wme.wme_wmeChanParams.cap_wmeParams[ac].wmep_noackPolicy) 1479 qos[0] |= IEEE80211_QOS_ACKPOLICY_NOACK; 1480#ifdef IEEE80211_SUPPORT_MESH 1481 if (vap->iv_opmode == IEEE80211_M_MBSS) 1482 qos[1] = IEEE80211_QOS_MC; 1483 else 1484#endif 1485 qos[1] = 0; 1486 wh->i_fc[0] |= IEEE80211_FC0_SUBTYPE_QOS; 1487 1488 if ((m->m_flags & M_AMPDU_MPDU) == 0) { 1489 /* 1490 * NB: don't assign a sequence # to potential 1491 * aggregates; we expect this happens at the 1492 * point the frame comes off any aggregation q 1493 * as otherwise we may introduce holes in the 1494 * BA sequence space and/or make window accouting 1495 * more difficult. 1496 * 1497 * XXX may want to control this with a driver 1498 * capability; this may also change when we pull 1499 * aggregation up into net80211 1500 */ 1501 seqno = ni->ni_txseqs[tid]++; 1502 *(uint16_t *)wh->i_seq = 1503 htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT); 1504 M_SEQNO_SET(m, seqno); 1505 } 1506 } else { 1507 seqno = ni->ni_txseqs[IEEE80211_NONQOS_TID]++; 1508 *(uint16_t *)wh->i_seq = 1509 htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT); 1510 M_SEQNO_SET(m, seqno); 1511 } 1512 1513 1514 /* check if xmit fragmentation is required */ 1515 txfrag = (m->m_pkthdr.len > vap->iv_fragthreshold && 1516 !IEEE80211_IS_MULTICAST(wh->i_addr1) && 1517 (vap->iv_caps & IEEE80211_C_TXFRAG) && 1518 (m->m_flags & (M_FF | M_AMPDU_MPDU)) == 0); 1519 if (key != NULL) { 1520 /* 1521 * IEEE 802.1X: send EAPOL frames always in the clear. 1522 * WPA/WPA2: encrypt EAPOL keys when pairwise keys are set. 1523 */ 1524 if ((m->m_flags & M_EAPOL) == 0 || 1525 ((vap->iv_flags & IEEE80211_F_WPA) && 1526 (vap->iv_opmode == IEEE80211_M_STA ? 1527 !IEEE80211_KEY_UNDEFINED(key) : 1528 !IEEE80211_KEY_UNDEFINED(&ni->ni_ucastkey)))) { 1529 wh->i_fc[1] |= IEEE80211_FC1_PROTECTED; 1530 if (!ieee80211_crypto_enmic(vap, key, m, txfrag)) { 1531 IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_OUTPUT, 1532 eh.ether_dhost, 1533 "%s", "enmic failed, discard frame"); 1534 vap->iv_stats.is_crypto_enmicfail++; 1535 goto bad; 1536 } 1537 } 1538 } 1539 if (txfrag && !ieee80211_fragment(vap, m, hdrsize, 1540 key != NULL ? key->wk_cipher->ic_header : 0, vap->iv_fragthreshold)) 1541 goto bad; 1542 1543 m->m_flags |= M_ENCAP; /* mark encapsulated */ 1544 1545 IEEE80211_NODE_STAT(ni, tx_data); 1546 if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1547 IEEE80211_NODE_STAT(ni, tx_mcast); 1548 m->m_flags |= M_MCAST; 1549 } else 1550 IEEE80211_NODE_STAT(ni, tx_ucast); 1551 IEEE80211_NODE_STAT_ADD(ni, tx_bytes, datalen); 1552 1553 return m; 1554bad: 1555 if (m != NULL) 1556 m_freem(m); 1557 return NULL; 1558#undef WH4 1559#undef MC01 1560} 1561 1562/* 1563 * Fragment the frame according to the specified mtu. 1564 * The size of the 802.11 header (w/o padding) is provided 1565 * so we don't need to recalculate it. We create a new 1566 * mbuf for each fragment and chain it through m_nextpkt; 1567 * we might be able to optimize this by reusing the original 1568 * packet's mbufs but that is significantly more complicated. 1569 */ 1570static int 1571ieee80211_fragment(struct ieee80211vap *vap, struct mbuf *m0, 1572 u_int hdrsize, u_int ciphdrsize, u_int mtu) 1573{ 1574 struct ieee80211com *ic = vap->iv_ic; 1575 struct ieee80211_frame *wh, *whf; 1576 struct mbuf *m, *prev, *next; 1577 u_int totalhdrsize, fragno, fragsize, off, remainder, payload; 1578 u_int hdrspace; 1579 1580 KASSERT(m0->m_nextpkt == NULL, ("mbuf already chained?")); 1581 KASSERT(m0->m_pkthdr.len > mtu, 1582 ("pktlen %u mtu %u", m0->m_pkthdr.len, mtu)); 1583 1584 /* 1585 * Honor driver DATAPAD requirement. 1586 */ 1587 if (ic->ic_flags & IEEE80211_F_DATAPAD) 1588 hdrspace = roundup(hdrsize, sizeof(uint32_t)); 1589 else 1590 hdrspace = hdrsize; 1591 1592 wh = mtod(m0, struct ieee80211_frame *); 1593 /* NB: mark the first frag; it will be propagated below */ 1594 wh->i_fc[1] |= IEEE80211_FC1_MORE_FRAG; 1595 totalhdrsize = hdrspace + ciphdrsize; 1596 fragno = 1; 1597 off = mtu - ciphdrsize; 1598 remainder = m0->m_pkthdr.len - off; 1599 prev = m0; 1600 do { 1601 fragsize = totalhdrsize + remainder; 1602 if (fragsize > mtu) 1603 fragsize = mtu; 1604 /* XXX fragsize can be >2048! */ 1605 KASSERT(fragsize < MCLBYTES, 1606 ("fragment size %u too big!", fragsize)); 1607 if (fragsize > MHLEN) 1608 m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 1609 else 1610 m = m_gethdr(M_NOWAIT, MT_DATA); 1611 if (m == NULL) 1612 goto bad; 1613 /* leave room to prepend any cipher header */ 1614 m_align(m, fragsize - ciphdrsize); 1615 1616 /* 1617 * Form the header in the fragment. Note that since 1618 * we mark the first fragment with the MORE_FRAG bit 1619 * it automatically is propagated to each fragment; we 1620 * need only clear it on the last fragment (done below). 1621 * NB: frag 1+ dont have Mesh Control field present. 1622 */ 1623 whf = mtod(m, struct ieee80211_frame *); 1624 memcpy(whf, wh, hdrsize); 1625#ifdef IEEE80211_SUPPORT_MESH 1626 if (vap->iv_opmode == IEEE80211_M_MBSS) { 1627 if (IEEE80211_IS_DSTODS(wh)) 1628 ((struct ieee80211_qosframe_addr4 *) 1629 whf)->i_qos[1] &= ~IEEE80211_QOS_MC; 1630 else 1631 ((struct ieee80211_qosframe *) 1632 whf)->i_qos[1] &= ~IEEE80211_QOS_MC; 1633 } 1634#endif 1635 *(uint16_t *)&whf->i_seq[0] |= htole16( 1636 (fragno & IEEE80211_SEQ_FRAG_MASK) << 1637 IEEE80211_SEQ_FRAG_SHIFT); 1638 fragno++; 1639 1640 payload = fragsize - totalhdrsize; 1641 /* NB: destination is known to be contiguous */ 1642 1643 m_copydata(m0, off, payload, mtod(m, uint8_t *) + hdrspace); 1644 m->m_len = hdrspace + payload; 1645 m->m_pkthdr.len = hdrspace + payload; 1646 m->m_flags |= M_FRAG; 1647 1648 /* chain up the fragment */ 1649 prev->m_nextpkt = m; 1650 prev = m; 1651 1652 /* deduct fragment just formed */ 1653 remainder -= payload; 1654 off += payload; 1655 } while (remainder != 0); 1656 1657 /* set the last fragment */ 1658 m->m_flags |= M_LASTFRAG; 1659 whf->i_fc[1] &= ~IEEE80211_FC1_MORE_FRAG; 1660 1661 /* strip first mbuf now that everything has been copied */ 1662 m_adj(m0, -(m0->m_pkthdr.len - (mtu - ciphdrsize))); 1663 m0->m_flags |= M_FIRSTFRAG | M_FRAG; 1664 1665 vap->iv_stats.is_tx_fragframes++; 1666 vap->iv_stats.is_tx_frags += fragno-1; 1667 1668 return 1; 1669bad: 1670 /* reclaim fragments but leave original frame for caller to free */ 1671 for (m = m0->m_nextpkt; m != NULL; m = next) { 1672 next = m->m_nextpkt; 1673 m->m_nextpkt = NULL; /* XXX paranoid */ 1674 m_freem(m); 1675 } 1676 m0->m_nextpkt = NULL; 1677 return 0; 1678} 1679 1680/* 1681 * Add a supported rates element id to a frame. 1682 */ 1683uint8_t * 1684ieee80211_add_rates(uint8_t *frm, const struct ieee80211_rateset *rs) 1685{ 1686 int nrates; 1687 1688 *frm++ = IEEE80211_ELEMID_RATES; 1689 nrates = rs->rs_nrates; 1690 if (nrates > IEEE80211_RATE_SIZE) 1691 nrates = IEEE80211_RATE_SIZE; 1692 *frm++ = nrates; 1693 memcpy(frm, rs->rs_rates, nrates); 1694 return frm + nrates; 1695} 1696 1697/* 1698 * Add an extended supported rates element id to a frame. 1699 */ 1700uint8_t * 1701ieee80211_add_xrates(uint8_t *frm, const struct ieee80211_rateset *rs) 1702{ 1703 /* 1704 * Add an extended supported rates element if operating in 11g mode. 1705 */ 1706 if (rs->rs_nrates > IEEE80211_RATE_SIZE) { 1707 int nrates = rs->rs_nrates - IEEE80211_RATE_SIZE; 1708 *frm++ = IEEE80211_ELEMID_XRATES; 1709 *frm++ = nrates; 1710 memcpy(frm, rs->rs_rates + IEEE80211_RATE_SIZE, nrates); 1711 frm += nrates; 1712 } 1713 return frm; 1714} 1715 1716/* 1717 * Add an ssid element to a frame. 1718 */ 1719uint8_t * 1720ieee80211_add_ssid(uint8_t *frm, const uint8_t *ssid, u_int len) 1721{ 1722 *frm++ = IEEE80211_ELEMID_SSID; 1723 *frm++ = len; 1724 memcpy(frm, ssid, len); 1725 return frm + len; 1726} 1727 1728/* 1729 * Add an erp element to a frame. 1730 */ 1731static uint8_t * 1732ieee80211_add_erp(uint8_t *frm, struct ieee80211com *ic) 1733{ 1734 uint8_t erp; 1735 1736 *frm++ = IEEE80211_ELEMID_ERP; 1737 *frm++ = 1; 1738 erp = 0; 1739 if (ic->ic_nonerpsta != 0) 1740 erp |= IEEE80211_ERP_NON_ERP_PRESENT; 1741 if (ic->ic_flags & IEEE80211_F_USEPROT) 1742 erp |= IEEE80211_ERP_USE_PROTECTION; 1743 if (ic->ic_flags & IEEE80211_F_USEBARKER) 1744 erp |= IEEE80211_ERP_LONG_PREAMBLE; 1745 *frm++ = erp; 1746 return frm; 1747} 1748 1749/* 1750 * Add a CFParams element to a frame. 1751 */ 1752static uint8_t * 1753ieee80211_add_cfparms(uint8_t *frm, struct ieee80211com *ic) 1754{ 1755#define ADDSHORT(frm, v) do { \ 1756 LE_WRITE_2(frm, v); \ 1757 frm += 2; \ 1758} while (0) 1759 *frm++ = IEEE80211_ELEMID_CFPARMS; 1760 *frm++ = 6; 1761 *frm++ = 0; /* CFP count */ 1762 *frm++ = 2; /* CFP period */ 1763 ADDSHORT(frm, 0); /* CFP MaxDuration (TU) */ 1764 ADDSHORT(frm, 0); /* CFP CurRemaining (TU) */ 1765 return frm; 1766#undef ADDSHORT 1767} 1768 1769static __inline uint8_t * 1770add_appie(uint8_t *frm, const struct ieee80211_appie *ie) 1771{ 1772 memcpy(frm, ie->ie_data, ie->ie_len); 1773 return frm + ie->ie_len; 1774} 1775 1776static __inline uint8_t * 1777add_ie(uint8_t *frm, const uint8_t *ie) 1778{ 1779 memcpy(frm, ie, 2 + ie[1]); 1780 return frm + 2 + ie[1]; 1781} 1782 1783#define WME_OUI_BYTES 0x00, 0x50, 0xf2 1784/* 1785 * Add a WME information element to a frame. 1786 */ 1787static uint8_t * 1788ieee80211_add_wme_info(uint8_t *frm, struct ieee80211_wme_state *wme) 1789{ 1790 static const struct ieee80211_wme_info info = { 1791 .wme_id = IEEE80211_ELEMID_VENDOR, 1792 .wme_len = sizeof(struct ieee80211_wme_info) - 2, 1793 .wme_oui = { WME_OUI_BYTES }, 1794 .wme_type = WME_OUI_TYPE, 1795 .wme_subtype = WME_INFO_OUI_SUBTYPE, 1796 .wme_version = WME_VERSION, 1797 .wme_info = 0, 1798 }; 1799 memcpy(frm, &info, sizeof(info)); 1800 return frm + sizeof(info); 1801} 1802 1803/* 1804 * Add a WME parameters element to a frame. 1805 */ 1806static uint8_t * 1807ieee80211_add_wme_param(uint8_t *frm, struct ieee80211_wme_state *wme) 1808{ 1809#define SM(_v, _f) (((_v) << _f##_S) & _f) 1810#define ADDSHORT(frm, v) do { \ 1811 LE_WRITE_2(frm, v); \ 1812 frm += 2; \ 1813} while (0) 1814 /* NB: this works 'cuz a param has an info at the front */ 1815 static const struct ieee80211_wme_info param = { 1816 .wme_id = IEEE80211_ELEMID_VENDOR, 1817 .wme_len = sizeof(struct ieee80211_wme_param) - 2, 1818 .wme_oui = { WME_OUI_BYTES }, 1819 .wme_type = WME_OUI_TYPE, 1820 .wme_subtype = WME_PARAM_OUI_SUBTYPE, 1821 .wme_version = WME_VERSION, 1822 }; 1823 int i; 1824 1825 memcpy(frm, ¶m, sizeof(param)); 1826 frm += __offsetof(struct ieee80211_wme_info, wme_info); 1827 *frm++ = wme->wme_bssChanParams.cap_info; /* AC info */ 1828 *frm++ = 0; /* reserved field */ 1829 for (i = 0; i < WME_NUM_AC; i++) { 1830 const struct wmeParams *ac = 1831 &wme->wme_bssChanParams.cap_wmeParams[i]; 1832 *frm++ = SM(i, WME_PARAM_ACI) 1833 | SM(ac->wmep_acm, WME_PARAM_ACM) 1834 | SM(ac->wmep_aifsn, WME_PARAM_AIFSN) 1835 ; 1836 *frm++ = SM(ac->wmep_logcwmax, WME_PARAM_LOGCWMAX) 1837 | SM(ac->wmep_logcwmin, WME_PARAM_LOGCWMIN) 1838 ; 1839 ADDSHORT(frm, ac->wmep_txopLimit); 1840 } 1841 return frm; 1842#undef SM 1843#undef ADDSHORT 1844} 1845#undef WME_OUI_BYTES 1846 1847/* 1848 * Add an 11h Power Constraint element to a frame. 1849 */ 1850static uint8_t * 1851ieee80211_add_powerconstraint(uint8_t *frm, struct ieee80211vap *vap) 1852{ 1853 const struct ieee80211_channel *c = vap->iv_bss->ni_chan; 1854 /* XXX per-vap tx power limit? */ 1855 int8_t limit = vap->iv_ic->ic_txpowlimit / 2; 1856 1857 frm[0] = IEEE80211_ELEMID_PWRCNSTR; 1858 frm[1] = 1; 1859 frm[2] = c->ic_maxregpower > limit ? c->ic_maxregpower - limit : 0; 1860 return frm + 3; 1861} 1862 1863/* 1864 * Add an 11h Power Capability element to a frame. 1865 */ 1866static uint8_t * 1867ieee80211_add_powercapability(uint8_t *frm, const struct ieee80211_channel *c) 1868{ 1869 frm[0] = IEEE80211_ELEMID_PWRCAP; 1870 frm[1] = 2; 1871 frm[2] = c->ic_minpower; 1872 frm[3] = c->ic_maxpower; 1873 return frm + 4; 1874} 1875 1876/* 1877 * Add an 11h Supported Channels element to a frame. 1878 */ 1879static uint8_t * 1880ieee80211_add_supportedchannels(uint8_t *frm, struct ieee80211com *ic) 1881{ 1882 static const int ielen = 26; 1883 1884 frm[0] = IEEE80211_ELEMID_SUPPCHAN; 1885 frm[1] = ielen; 1886 /* XXX not correct */ 1887 memcpy(frm+2, ic->ic_chan_avail, ielen); 1888 return frm + 2 + ielen; 1889} 1890 1891/* 1892 * Add an 11h Quiet time element to a frame. 1893 */ 1894static uint8_t * 1895ieee80211_add_quiet(uint8_t *frm, struct ieee80211vap *vap) 1896{ 1897 struct ieee80211_quiet_ie *quiet = (struct ieee80211_quiet_ie *) frm; 1898 1899 quiet->quiet_ie = IEEE80211_ELEMID_QUIET; 1900 quiet->len = 6; 1901 if (vap->iv_quiet_count_value == 1) 1902 vap->iv_quiet_count_value = vap->iv_quiet_count; 1903 else if (vap->iv_quiet_count_value > 1) 1904 vap->iv_quiet_count_value--; 1905 1906 if (vap->iv_quiet_count_value == 0) { 1907 /* value 0 is reserved as per 802.11h standerd */ 1908 vap->iv_quiet_count_value = 1; 1909 } 1910 1911 quiet->tbttcount = vap->iv_quiet_count_value; 1912 quiet->period = vap->iv_quiet_period; 1913 quiet->duration = htole16(vap->iv_quiet_duration); 1914 quiet->offset = htole16(vap->iv_quiet_offset); 1915 return frm + sizeof(*quiet); 1916} 1917 1918/* 1919 * Add an 11h Channel Switch Announcement element to a frame. 1920 * Note that we use the per-vap CSA count to adjust the global 1921 * counter so we can use this routine to form probe response 1922 * frames and get the current count. 1923 */ 1924static uint8_t * 1925ieee80211_add_csa(uint8_t *frm, struct ieee80211vap *vap) 1926{ 1927 struct ieee80211com *ic = vap->iv_ic; 1928 struct ieee80211_csa_ie *csa = (struct ieee80211_csa_ie *) frm; 1929 1930 csa->csa_ie = IEEE80211_ELEMID_CSA; 1931 csa->csa_len = 3; 1932 csa->csa_mode = 1; /* XXX force quiet on channel */ 1933 csa->csa_newchan = ieee80211_chan2ieee(ic, ic->ic_csa_newchan); 1934 csa->csa_count = ic->ic_csa_count - vap->iv_csa_count; 1935 return frm + sizeof(*csa); 1936} 1937 1938/* 1939 * Add an 11h country information element to a frame. 1940 */ 1941static uint8_t * 1942ieee80211_add_countryie(uint8_t *frm, struct ieee80211com *ic) 1943{ 1944 1945 if (ic->ic_countryie == NULL || 1946 ic->ic_countryie_chan != ic->ic_bsschan) { 1947 /* 1948 * Handle lazy construction of ie. This is done on 1949 * first use and after a channel change that requires 1950 * re-calculation. 1951 */ 1952 if (ic->ic_countryie != NULL) 1953 free(ic->ic_countryie, M_80211_NODE_IE); 1954 ic->ic_countryie = ieee80211_alloc_countryie(ic); 1955 if (ic->ic_countryie == NULL) 1956 return frm; 1957 ic->ic_countryie_chan = ic->ic_bsschan; 1958 } 1959 return add_appie(frm, ic->ic_countryie); 1960} 1961 1962uint8_t * 1963ieee80211_add_wpa(uint8_t *frm, const struct ieee80211vap *vap) 1964{ 1965 if (vap->iv_flags & IEEE80211_F_WPA1 && vap->iv_wpa_ie != NULL) 1966 return (add_ie(frm, vap->iv_wpa_ie)); 1967 else { 1968 /* XXX else complain? */ 1969 return (frm); 1970 } 1971} 1972 1973uint8_t * 1974ieee80211_add_rsn(uint8_t *frm, const struct ieee80211vap *vap) 1975{ 1976 if (vap->iv_flags & IEEE80211_F_WPA2 && vap->iv_rsn_ie != NULL) 1977 return (add_ie(frm, vap->iv_rsn_ie)); 1978 else { 1979 /* XXX else complain? */ 1980 return (frm); 1981 } 1982} 1983 1984uint8_t * 1985ieee80211_add_qos(uint8_t *frm, const struct ieee80211_node *ni) 1986{ 1987 if (ni->ni_flags & IEEE80211_NODE_QOS) { 1988 *frm++ = IEEE80211_ELEMID_QOS; 1989 *frm++ = 1; 1990 *frm++ = 0; 1991 } 1992 1993 return (frm); 1994} 1995 1996/* 1997 * Send a probe request frame with the specified ssid 1998 * and any optional information element data. 1999 */ 2000int 2001ieee80211_send_probereq(struct ieee80211_node *ni, 2002 const uint8_t sa[IEEE80211_ADDR_LEN], 2003 const uint8_t da[IEEE80211_ADDR_LEN], 2004 const uint8_t bssid[IEEE80211_ADDR_LEN], 2005 const uint8_t *ssid, size_t ssidlen) 2006{ 2007 struct ieee80211vap *vap = ni->ni_vap; 2008 struct ieee80211com *ic = ni->ni_ic; 2009 const struct ieee80211_txparam *tp; 2010 struct ieee80211_bpf_params params; 2011 struct ieee80211_frame *wh; 2012 const struct ieee80211_rateset *rs; 2013 struct mbuf *m; 2014 uint8_t *frm; 2015 int ret; 2016 2017 if (vap->iv_state == IEEE80211_S_CAC) { 2018 IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT, ni, 2019 "block %s frame in CAC state", "probe request"); 2020 vap->iv_stats.is_tx_badstate++; 2021 return EIO; /* XXX */ 2022 } 2023 2024 /* 2025 * Hold a reference on the node so it doesn't go away until after 2026 * the xmit is complete all the way in the driver. On error we 2027 * will remove our reference. 2028 */ 2029 IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, 2030 "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", 2031 __func__, __LINE__, 2032 ni, ether_sprintf(ni->ni_macaddr), 2033 ieee80211_node_refcnt(ni)+1); 2034 ieee80211_ref_node(ni); 2035 2036 /* 2037 * prreq frame format 2038 * [tlv] ssid 2039 * [tlv] supported rates 2040 * [tlv] RSN (optional) 2041 * [tlv] extended supported rates 2042 * [tlv] WPA (optional) 2043 * [tlv] user-specified ie's 2044 */ 2045 m = ieee80211_getmgtframe(&frm, 2046 ic->ic_headroom + sizeof(struct ieee80211_frame), 2047 2 + IEEE80211_NWID_LEN 2048 + 2 + IEEE80211_RATE_SIZE 2049 + sizeof(struct ieee80211_ie_wpa) 2050 + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) 2051 + sizeof(struct ieee80211_ie_wpa) 2052 + (vap->iv_appie_probereq != NULL ? 2053 vap->iv_appie_probereq->ie_len : 0) 2054 ); 2055 if (m == NULL) { 2056 vap->iv_stats.is_tx_nobuf++; 2057 ieee80211_free_node(ni); 2058 return ENOMEM; 2059 } 2060 2061 frm = ieee80211_add_ssid(frm, ssid, ssidlen); 2062 rs = ieee80211_get_suprates(ic, ic->ic_curchan); 2063 frm = ieee80211_add_rates(frm, rs); 2064 frm = ieee80211_add_rsn(frm, vap); 2065 frm = ieee80211_add_xrates(frm, rs); 2066 frm = ieee80211_add_wpa(frm, vap); 2067 if (vap->iv_appie_probereq != NULL) 2068 frm = add_appie(frm, vap->iv_appie_probereq); 2069 m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); 2070 2071 KASSERT(M_LEADINGSPACE(m) >= sizeof(struct ieee80211_frame), 2072 ("leading space %zd", M_LEADINGSPACE(m))); 2073 M_PREPEND(m, sizeof(struct ieee80211_frame), M_NOWAIT); 2074 if (m == NULL) { 2075 /* NB: cannot happen */ 2076 ieee80211_free_node(ni); 2077 return ENOMEM; 2078 } 2079 2080 IEEE80211_TX_LOCK(ic); 2081 wh = mtod(m, struct ieee80211_frame *); 2082 ieee80211_send_setup(ni, m, 2083 IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_REQ, 2084 IEEE80211_NONQOS_TID, sa, da, bssid); 2085 /* XXX power management? */ 2086 m->m_flags |= M_ENCAP; /* mark encapsulated */ 2087 2088 M_WME_SETAC(m, WME_AC_BE); 2089 2090 IEEE80211_NODE_STAT(ni, tx_probereq); 2091 IEEE80211_NODE_STAT(ni, tx_mgmt); 2092 2093 IEEE80211_DPRINTF(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_DUMPPKTS, 2094 "send probe req on channel %u bssid %s ssid \"%.*s\"\n", 2095 ieee80211_chan2ieee(ic, ic->ic_curchan), ether_sprintf(bssid), 2096 ssidlen, ssid); 2097 2098 memset(¶ms, 0, sizeof(params)); 2099 params.ibp_pri = M_WME_GETAC(m); 2100 tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)]; 2101 params.ibp_rate0 = tp->mgmtrate; 2102 if (IEEE80211_IS_MULTICAST(da)) { 2103 params.ibp_flags |= IEEE80211_BPF_NOACK; 2104 params.ibp_try0 = 1; 2105 } else 2106 params.ibp_try0 = tp->maxretry; 2107 params.ibp_power = ni->ni_txpower; 2108 ret = ieee80211_raw_output(vap, ni, m, ¶ms); 2109 IEEE80211_TX_UNLOCK(ic); 2110 return (ret); 2111} 2112 2113/* 2114 * Calculate capability information for mgt frames. 2115 */ 2116uint16_t 2117ieee80211_getcapinfo(struct ieee80211vap *vap, struct ieee80211_channel *chan) 2118{ 2119 struct ieee80211com *ic = vap->iv_ic; 2120 uint16_t capinfo; 2121 2122 KASSERT(vap->iv_opmode != IEEE80211_M_STA, ("station mode")); 2123 2124 if (vap->iv_opmode == IEEE80211_M_HOSTAP) 2125 capinfo = IEEE80211_CAPINFO_ESS; 2126 else if (vap->iv_opmode == IEEE80211_M_IBSS) 2127 capinfo = IEEE80211_CAPINFO_IBSS; 2128 else 2129 capinfo = 0; 2130 if (vap->iv_flags & IEEE80211_F_PRIVACY) 2131 capinfo |= IEEE80211_CAPINFO_PRIVACY; 2132 if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && 2133 IEEE80211_IS_CHAN_2GHZ(chan)) 2134 capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; 2135 if (ic->ic_flags & IEEE80211_F_SHSLOT) 2136 capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; 2137 if (IEEE80211_IS_CHAN_5GHZ(chan) && (vap->iv_flags & IEEE80211_F_DOTH)) 2138 capinfo |= IEEE80211_CAPINFO_SPECTRUM_MGMT; 2139 return capinfo; 2140} 2141 2142/* 2143 * Send a management frame. The node is for the destination (or ic_bss 2144 * when in station mode). Nodes other than ic_bss have their reference 2145 * count bumped to reflect our use for an indeterminant time. 2146 */ 2147int 2148ieee80211_send_mgmt(struct ieee80211_node *ni, int type, int arg) 2149{ 2150#define HTFLAGS (IEEE80211_NODE_HT | IEEE80211_NODE_HTCOMPAT) 2151#define senderr(_x, _v) do { vap->iv_stats._v++; ret = _x; goto bad; } while (0) 2152 struct ieee80211vap *vap = ni->ni_vap; 2153 struct ieee80211com *ic = ni->ni_ic; 2154 struct ieee80211_node *bss = vap->iv_bss; 2155 struct ieee80211_bpf_params params; 2156 struct mbuf *m; 2157 uint8_t *frm; 2158 uint16_t capinfo; 2159 int has_challenge, is_shared_key, ret, status; 2160 2161 KASSERT(ni != NULL, ("null node")); 2162 2163 /* 2164 * Hold a reference on the node so it doesn't go away until after 2165 * the xmit is complete all the way in the driver. On error we 2166 * will remove our reference. 2167 */ 2168 IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, 2169 "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", 2170 __func__, __LINE__, 2171 ni, ether_sprintf(ni->ni_macaddr), 2172 ieee80211_node_refcnt(ni)+1); 2173 ieee80211_ref_node(ni); 2174 2175 memset(¶ms, 0, sizeof(params)); 2176 switch (type) { 2177 2178 case IEEE80211_FC0_SUBTYPE_AUTH: 2179 status = arg >> 16; 2180 arg &= 0xffff; 2181 has_challenge = ((arg == IEEE80211_AUTH_SHARED_CHALLENGE || 2182 arg == IEEE80211_AUTH_SHARED_RESPONSE) && 2183 ni->ni_challenge != NULL); 2184 2185 /* 2186 * Deduce whether we're doing open authentication or 2187 * shared key authentication. We do the latter if 2188 * we're in the middle of a shared key authentication 2189 * handshake or if we're initiating an authentication 2190 * request and configured to use shared key. 2191 */ 2192 is_shared_key = has_challenge || 2193 arg >= IEEE80211_AUTH_SHARED_RESPONSE || 2194 (arg == IEEE80211_AUTH_SHARED_REQUEST && 2195 bss->ni_authmode == IEEE80211_AUTH_SHARED); 2196 2197 m = ieee80211_getmgtframe(&frm, 2198 ic->ic_headroom + sizeof(struct ieee80211_frame), 2199 3 * sizeof(uint16_t) 2200 + (has_challenge && status == IEEE80211_STATUS_SUCCESS ? 2201 sizeof(uint16_t)+IEEE80211_CHALLENGE_LEN : 0) 2202 ); 2203 if (m == NULL) 2204 senderr(ENOMEM, is_tx_nobuf); 2205 2206 ((uint16_t *)frm)[0] = 2207 (is_shared_key) ? htole16(IEEE80211_AUTH_ALG_SHARED) 2208 : htole16(IEEE80211_AUTH_ALG_OPEN); 2209 ((uint16_t *)frm)[1] = htole16(arg); /* sequence number */ 2210 ((uint16_t *)frm)[2] = htole16(status);/* status */ 2211 2212 if (has_challenge && status == IEEE80211_STATUS_SUCCESS) { 2213 ((uint16_t *)frm)[3] = 2214 htole16((IEEE80211_CHALLENGE_LEN << 8) | 2215 IEEE80211_ELEMID_CHALLENGE); 2216 memcpy(&((uint16_t *)frm)[4], ni->ni_challenge, 2217 IEEE80211_CHALLENGE_LEN); 2218 m->m_pkthdr.len = m->m_len = 2219 4 * sizeof(uint16_t) + IEEE80211_CHALLENGE_LEN; 2220 if (arg == IEEE80211_AUTH_SHARED_RESPONSE) { 2221 IEEE80211_NOTE(vap, IEEE80211_MSG_AUTH, ni, 2222 "request encrypt frame (%s)", __func__); 2223 /* mark frame for encryption */ 2224 params.ibp_flags |= IEEE80211_BPF_CRYPTO; 2225 } 2226 } else 2227 m->m_pkthdr.len = m->m_len = 3 * sizeof(uint16_t); 2228 2229 /* XXX not right for shared key */ 2230 if (status == IEEE80211_STATUS_SUCCESS) 2231 IEEE80211_NODE_STAT(ni, tx_auth); 2232 else 2233 IEEE80211_NODE_STAT(ni, tx_auth_fail); 2234 2235 if (vap->iv_opmode == IEEE80211_M_STA) 2236 ieee80211_add_callback(m, ieee80211_tx_mgt_cb, 2237 (void *) vap->iv_state); 2238 break; 2239 2240 case IEEE80211_FC0_SUBTYPE_DEAUTH: 2241 IEEE80211_NOTE(vap, IEEE80211_MSG_AUTH, ni, 2242 "send station deauthenticate (reason %d)", arg); 2243 m = ieee80211_getmgtframe(&frm, 2244 ic->ic_headroom + sizeof(struct ieee80211_frame), 2245 sizeof(uint16_t)); 2246 if (m == NULL) 2247 senderr(ENOMEM, is_tx_nobuf); 2248 *(uint16_t *)frm = htole16(arg); /* reason */ 2249 m->m_pkthdr.len = m->m_len = sizeof(uint16_t); 2250 2251 IEEE80211_NODE_STAT(ni, tx_deauth); 2252 IEEE80211_NODE_STAT_SET(ni, tx_deauth_code, arg); 2253 2254 ieee80211_node_unauthorize(ni); /* port closed */ 2255 break; 2256 2257 case IEEE80211_FC0_SUBTYPE_ASSOC_REQ: 2258 case IEEE80211_FC0_SUBTYPE_REASSOC_REQ: 2259 /* 2260 * asreq frame format 2261 * [2] capability information 2262 * [2] listen interval 2263 * [6*] current AP address (reassoc only) 2264 * [tlv] ssid 2265 * [tlv] supported rates 2266 * [tlv] extended supported rates 2267 * [4] power capability (optional) 2268 * [28] supported channels (optional) 2269 * [tlv] HT capabilities 2270 * [tlv] WME (optional) 2271 * [tlv] Vendor OUI HT capabilities (optional) 2272 * [tlv] Atheros capabilities (if negotiated) 2273 * [tlv] AppIE's (optional) 2274 */ 2275 m = ieee80211_getmgtframe(&frm, 2276 ic->ic_headroom + sizeof(struct ieee80211_frame), 2277 sizeof(uint16_t) 2278 + sizeof(uint16_t) 2279 + IEEE80211_ADDR_LEN 2280 + 2 + IEEE80211_NWID_LEN 2281 + 2 + IEEE80211_RATE_SIZE 2282 + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) 2283 + 4 2284 + 2 + 26 2285 + sizeof(struct ieee80211_wme_info) 2286 + sizeof(struct ieee80211_ie_htcap) 2287 + 4 + sizeof(struct ieee80211_ie_htcap) 2288#ifdef IEEE80211_SUPPORT_SUPERG 2289 + sizeof(struct ieee80211_ath_ie) 2290#endif 2291 + (vap->iv_appie_wpa != NULL ? 2292 vap->iv_appie_wpa->ie_len : 0) 2293 + (vap->iv_appie_assocreq != NULL ? 2294 vap->iv_appie_assocreq->ie_len : 0) 2295 ); 2296 if (m == NULL) 2297 senderr(ENOMEM, is_tx_nobuf); 2298 2299 KASSERT(vap->iv_opmode == IEEE80211_M_STA, 2300 ("wrong mode %u", vap->iv_opmode)); 2301 capinfo = IEEE80211_CAPINFO_ESS; 2302 if (vap->iv_flags & IEEE80211_F_PRIVACY) 2303 capinfo |= IEEE80211_CAPINFO_PRIVACY; 2304 /* 2305 * NB: Some 11a AP's reject the request when 2306 * short premable is set. 2307 */ 2308 if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && 2309 IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) 2310 capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; 2311 if (IEEE80211_IS_CHAN_ANYG(ic->ic_curchan) && 2312 (ic->ic_caps & IEEE80211_C_SHSLOT)) 2313 capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; 2314 if ((ni->ni_capinfo & IEEE80211_CAPINFO_SPECTRUM_MGMT) && 2315 (vap->iv_flags & IEEE80211_F_DOTH)) 2316 capinfo |= IEEE80211_CAPINFO_SPECTRUM_MGMT; 2317 *(uint16_t *)frm = htole16(capinfo); 2318 frm += 2; 2319 2320 KASSERT(bss->ni_intval != 0, ("beacon interval is zero!")); 2321 *(uint16_t *)frm = htole16(howmany(ic->ic_lintval, 2322 bss->ni_intval)); 2323 frm += 2; 2324 2325 if (type == IEEE80211_FC0_SUBTYPE_REASSOC_REQ) { 2326 IEEE80211_ADDR_COPY(frm, bss->ni_bssid); 2327 frm += IEEE80211_ADDR_LEN; 2328 } 2329 2330 frm = ieee80211_add_ssid(frm, ni->ni_essid, ni->ni_esslen); 2331 frm = ieee80211_add_rates(frm, &ni->ni_rates); 2332 frm = ieee80211_add_rsn(frm, vap); 2333 frm = ieee80211_add_xrates(frm, &ni->ni_rates); 2334 if (capinfo & IEEE80211_CAPINFO_SPECTRUM_MGMT) { 2335 frm = ieee80211_add_powercapability(frm, 2336 ic->ic_curchan); 2337 frm = ieee80211_add_supportedchannels(frm, ic); 2338 } 2339 2340 /* 2341 * Check the channel - we may be using an 11n NIC with an 2342 * 11n capable station, but we're configured to be an 11b 2343 * channel. 2344 */ 2345 if ((vap->iv_flags_ht & IEEE80211_FHT_HT) && 2346 IEEE80211_IS_CHAN_HT(ni->ni_chan) && 2347 ni->ni_ies.htcap_ie != NULL && 2348 ni->ni_ies.htcap_ie[0] == IEEE80211_ELEMID_HTCAP) { 2349 frm = ieee80211_add_htcap(frm, ni); 2350 } 2351 frm = ieee80211_add_wpa(frm, vap); 2352 if ((ic->ic_flags & IEEE80211_F_WME) && 2353 ni->ni_ies.wme_ie != NULL) 2354 frm = ieee80211_add_wme_info(frm, &ic->ic_wme); 2355 2356 /* 2357 * Same deal - only send HT info if we're on an 11n 2358 * capable channel. 2359 */ 2360 if ((vap->iv_flags_ht & IEEE80211_FHT_HT) && 2361 IEEE80211_IS_CHAN_HT(ni->ni_chan) && 2362 ni->ni_ies.htcap_ie != NULL && 2363 ni->ni_ies.htcap_ie[0] == IEEE80211_ELEMID_VENDOR) { 2364 frm = ieee80211_add_htcap_vendor(frm, ni); 2365 } 2366#ifdef IEEE80211_SUPPORT_SUPERG 2367 if (IEEE80211_ATH_CAP(vap, ni, IEEE80211_F_ATHEROS)) { 2368 frm = ieee80211_add_ath(frm, 2369 IEEE80211_ATH_CAP(vap, ni, IEEE80211_F_ATHEROS), 2370 ((vap->iv_flags & IEEE80211_F_WPA) == 0 && 2371 ni->ni_authmode != IEEE80211_AUTH_8021X) ? 2372 vap->iv_def_txkey : IEEE80211_KEYIX_NONE); 2373 } 2374#endif /* IEEE80211_SUPPORT_SUPERG */ 2375 if (vap->iv_appie_assocreq != NULL) 2376 frm = add_appie(frm, vap->iv_appie_assocreq); 2377 m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); 2378 2379 ieee80211_add_callback(m, ieee80211_tx_mgt_cb, 2380 (void *) vap->iv_state); 2381 break; 2382 2383 case IEEE80211_FC0_SUBTYPE_ASSOC_RESP: 2384 case IEEE80211_FC0_SUBTYPE_REASSOC_RESP: 2385 /* 2386 * asresp frame format 2387 * [2] capability information 2388 * [2] status 2389 * [2] association ID 2390 * [tlv] supported rates 2391 * [tlv] extended supported rates 2392 * [tlv] HT capabilities (standard, if STA enabled) 2393 * [tlv] HT information (standard, if STA enabled) 2394 * [tlv] WME (if configured and STA enabled) 2395 * [tlv] HT capabilities (vendor OUI, if STA enabled) 2396 * [tlv] HT information (vendor OUI, if STA enabled) 2397 * [tlv] Atheros capabilities (if STA enabled) 2398 * [tlv] AppIE's (optional) 2399 */ 2400 m = ieee80211_getmgtframe(&frm, 2401 ic->ic_headroom + sizeof(struct ieee80211_frame), 2402 sizeof(uint16_t) 2403 + sizeof(uint16_t) 2404 + sizeof(uint16_t) 2405 + 2 + IEEE80211_RATE_SIZE 2406 + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) 2407 + sizeof(struct ieee80211_ie_htcap) + 4 2408 + sizeof(struct ieee80211_ie_htinfo) + 4 2409 + sizeof(struct ieee80211_wme_param) 2410#ifdef IEEE80211_SUPPORT_SUPERG 2411 + sizeof(struct ieee80211_ath_ie) 2412#endif 2413 + (vap->iv_appie_assocresp != NULL ? 2414 vap->iv_appie_assocresp->ie_len : 0) 2415 ); 2416 if (m == NULL) 2417 senderr(ENOMEM, is_tx_nobuf); 2418 2419 capinfo = ieee80211_getcapinfo(vap, bss->ni_chan); 2420 *(uint16_t *)frm = htole16(capinfo); 2421 frm += 2; 2422 2423 *(uint16_t *)frm = htole16(arg); /* status */ 2424 frm += 2; 2425 2426 if (arg == IEEE80211_STATUS_SUCCESS) { 2427 *(uint16_t *)frm = htole16(ni->ni_associd); 2428 IEEE80211_NODE_STAT(ni, tx_assoc); 2429 } else 2430 IEEE80211_NODE_STAT(ni, tx_assoc_fail); 2431 frm += 2; 2432 2433 frm = ieee80211_add_rates(frm, &ni->ni_rates); 2434 frm = ieee80211_add_xrates(frm, &ni->ni_rates); 2435 /* NB: respond according to what we received */ 2436 if ((ni->ni_flags & HTFLAGS) == IEEE80211_NODE_HT) { 2437 frm = ieee80211_add_htcap(frm, ni); 2438 frm = ieee80211_add_htinfo(frm, ni); 2439 } 2440 if ((vap->iv_flags & IEEE80211_F_WME) && 2441 ni->ni_ies.wme_ie != NULL) 2442 frm = ieee80211_add_wme_param(frm, &ic->ic_wme); 2443 if ((ni->ni_flags & HTFLAGS) == HTFLAGS) { 2444 frm = ieee80211_add_htcap_vendor(frm, ni); 2445 frm = ieee80211_add_htinfo_vendor(frm, ni); 2446 } 2447#ifdef IEEE80211_SUPPORT_SUPERG 2448 if (IEEE80211_ATH_CAP(vap, ni, IEEE80211_F_ATHEROS)) 2449 frm = ieee80211_add_ath(frm, 2450 IEEE80211_ATH_CAP(vap, ni, IEEE80211_F_ATHEROS), 2451 ((vap->iv_flags & IEEE80211_F_WPA) == 0 && 2452 ni->ni_authmode != IEEE80211_AUTH_8021X) ? 2453 vap->iv_def_txkey : IEEE80211_KEYIX_NONE); 2454#endif /* IEEE80211_SUPPORT_SUPERG */ 2455 if (vap->iv_appie_assocresp != NULL) 2456 frm = add_appie(frm, vap->iv_appie_assocresp); 2457 m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); 2458 break; 2459 2460 case IEEE80211_FC0_SUBTYPE_DISASSOC: 2461 IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC, ni, 2462 "send station disassociate (reason %d)", arg); 2463 m = ieee80211_getmgtframe(&frm, 2464 ic->ic_headroom + sizeof(struct ieee80211_frame), 2465 sizeof(uint16_t)); 2466 if (m == NULL) 2467 senderr(ENOMEM, is_tx_nobuf); 2468 *(uint16_t *)frm = htole16(arg); /* reason */ 2469 m->m_pkthdr.len = m->m_len = sizeof(uint16_t); 2470 2471 IEEE80211_NODE_STAT(ni, tx_disassoc); 2472 IEEE80211_NODE_STAT_SET(ni, tx_disassoc_code, arg); 2473 break; 2474 2475 default: 2476 IEEE80211_NOTE(vap, IEEE80211_MSG_ANY, ni, 2477 "invalid mgmt frame type %u", type); 2478 senderr(EINVAL, is_tx_unknownmgt); 2479 /* NOTREACHED */ 2480 } 2481 2482 /* NB: force non-ProbeResp frames to the highest queue */ 2483 params.ibp_pri = WME_AC_VO; 2484 params.ibp_rate0 = bss->ni_txparms->mgmtrate; 2485 /* NB: we know all frames are unicast */ 2486 params.ibp_try0 = bss->ni_txparms->maxretry; 2487 params.ibp_power = bss->ni_txpower; 2488 return ieee80211_mgmt_output(ni, m, type, ¶ms); 2489bad: 2490 ieee80211_free_node(ni); 2491 return ret; 2492#undef senderr 2493#undef HTFLAGS 2494} 2495 2496/* 2497 * Return an mbuf with a probe response frame in it. 2498 * Space is left to prepend and 802.11 header at the 2499 * front but it's left to the caller to fill in. 2500 */ 2501struct mbuf * 2502ieee80211_alloc_proberesp(struct ieee80211_node *bss, int legacy) 2503{ 2504 struct ieee80211vap *vap = bss->ni_vap; 2505 struct ieee80211com *ic = bss->ni_ic; 2506 const struct ieee80211_rateset *rs; 2507 struct mbuf *m; 2508 uint16_t capinfo; 2509 uint8_t *frm; 2510 2511 /* 2512 * probe response frame format 2513 * [8] time stamp 2514 * [2] beacon interval 2515 * [2] cabability information 2516 * [tlv] ssid 2517 * [tlv] supported rates 2518 * [tlv] parameter set (FH/DS) 2519 * [tlv] parameter set (IBSS) 2520 * [tlv] country (optional) 2521 * [3] power control (optional) 2522 * [5] channel switch announcement (CSA) (optional) 2523 * [tlv] extended rate phy (ERP) 2524 * [tlv] extended supported rates 2525 * [tlv] RSN (optional) 2526 * [tlv] HT capabilities 2527 * [tlv] HT information 2528 * [tlv] WPA (optional) 2529 * [tlv] WME (optional) 2530 * [tlv] Vendor OUI HT capabilities (optional) 2531 * [tlv] Vendor OUI HT information (optional) 2532 * [tlv] Atheros capabilities 2533 * [tlv] AppIE's (optional) 2534 * [tlv] Mesh ID (MBSS) 2535 * [tlv] Mesh Conf (MBSS) 2536 */ 2537 m = ieee80211_getmgtframe(&frm, 2538 ic->ic_headroom + sizeof(struct ieee80211_frame), 2539 8 2540 + sizeof(uint16_t) 2541 + sizeof(uint16_t) 2542 + 2 + IEEE80211_NWID_LEN 2543 + 2 + IEEE80211_RATE_SIZE 2544 + 7 /* max(7,3) */ 2545 + IEEE80211_COUNTRY_MAX_SIZE 2546 + 3 2547 + sizeof(struct ieee80211_csa_ie) 2548 + sizeof(struct ieee80211_quiet_ie) 2549 + 3 2550 + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) 2551 + sizeof(struct ieee80211_ie_wpa) 2552 + sizeof(struct ieee80211_ie_htcap) 2553 + sizeof(struct ieee80211_ie_htinfo) 2554 + sizeof(struct ieee80211_ie_wpa) 2555 + sizeof(struct ieee80211_wme_param) 2556 + 4 + sizeof(struct ieee80211_ie_htcap) 2557 + 4 + sizeof(struct ieee80211_ie_htinfo) 2558#ifdef IEEE80211_SUPPORT_SUPERG 2559 + sizeof(struct ieee80211_ath_ie) 2560#endif 2561#ifdef IEEE80211_SUPPORT_MESH 2562 + 2 + IEEE80211_MESHID_LEN 2563 + sizeof(struct ieee80211_meshconf_ie) 2564#endif 2565 + (vap->iv_appie_proberesp != NULL ? 2566 vap->iv_appie_proberesp->ie_len : 0) 2567 ); 2568 if (m == NULL) { 2569 vap->iv_stats.is_tx_nobuf++; 2570 return NULL; 2571 } 2572 2573 memset(frm, 0, 8); /* timestamp should be filled later */ 2574 frm += 8; 2575 *(uint16_t *)frm = htole16(bss->ni_intval); 2576 frm += 2; 2577 capinfo = ieee80211_getcapinfo(vap, bss->ni_chan); 2578 *(uint16_t *)frm = htole16(capinfo); 2579 frm += 2; 2580 2581 frm = ieee80211_add_ssid(frm, bss->ni_essid, bss->ni_esslen); 2582 rs = ieee80211_get_suprates(ic, bss->ni_chan); 2583 frm = ieee80211_add_rates(frm, rs); 2584 2585 if (IEEE80211_IS_CHAN_FHSS(bss->ni_chan)) { 2586 *frm++ = IEEE80211_ELEMID_FHPARMS; 2587 *frm++ = 5; 2588 *frm++ = bss->ni_fhdwell & 0x00ff; 2589 *frm++ = (bss->ni_fhdwell >> 8) & 0x00ff; 2590 *frm++ = IEEE80211_FH_CHANSET( 2591 ieee80211_chan2ieee(ic, bss->ni_chan)); 2592 *frm++ = IEEE80211_FH_CHANPAT( 2593 ieee80211_chan2ieee(ic, bss->ni_chan)); 2594 *frm++ = bss->ni_fhindex; 2595 } else { 2596 *frm++ = IEEE80211_ELEMID_DSPARMS; 2597 *frm++ = 1; 2598 *frm++ = ieee80211_chan2ieee(ic, bss->ni_chan); 2599 } 2600 2601 if (vap->iv_opmode == IEEE80211_M_IBSS) { 2602 *frm++ = IEEE80211_ELEMID_IBSSPARMS; 2603 *frm++ = 2; 2604 *frm++ = 0; *frm++ = 0; /* TODO: ATIM window */ 2605 } 2606 if ((vap->iv_flags & IEEE80211_F_DOTH) || 2607 (vap->iv_flags_ext & IEEE80211_FEXT_DOTD)) 2608 frm = ieee80211_add_countryie(frm, ic); 2609 if (vap->iv_flags & IEEE80211_F_DOTH) { 2610 if (IEEE80211_IS_CHAN_5GHZ(bss->ni_chan)) 2611 frm = ieee80211_add_powerconstraint(frm, vap); 2612 if (ic->ic_flags & IEEE80211_F_CSAPENDING) 2613 frm = ieee80211_add_csa(frm, vap); 2614 } 2615 if (vap->iv_flags & IEEE80211_F_DOTH) { 2616 if (IEEE80211_IS_CHAN_DFS(ic->ic_bsschan) && 2617 (vap->iv_flags_ext & IEEE80211_FEXT_DFS)) { 2618 if (vap->iv_quiet) 2619 frm = ieee80211_add_quiet(frm, vap); 2620 } 2621 } 2622 if (IEEE80211_IS_CHAN_ANYG(bss->ni_chan)) 2623 frm = ieee80211_add_erp(frm, ic); 2624 frm = ieee80211_add_xrates(frm, rs); 2625 frm = ieee80211_add_rsn(frm, vap); 2626 /* 2627 * NB: legacy 11b clients do not get certain ie's. 2628 * The caller identifies such clients by passing 2629 * a token in legacy to us. Could expand this to be 2630 * any legacy client for stuff like HT ie's. 2631 */ 2632 if (IEEE80211_IS_CHAN_HT(bss->ni_chan) && 2633 legacy != IEEE80211_SEND_LEGACY_11B) { 2634 frm = ieee80211_add_htcap(frm, bss); 2635 frm = ieee80211_add_htinfo(frm, bss); 2636 } 2637 frm = ieee80211_add_wpa(frm, vap); 2638 if (vap->iv_flags & IEEE80211_F_WME) 2639 frm = ieee80211_add_wme_param(frm, &ic->ic_wme); 2640 if (IEEE80211_IS_CHAN_HT(bss->ni_chan) && 2641 (vap->iv_flags_ht & IEEE80211_FHT_HTCOMPAT) && 2642 legacy != IEEE80211_SEND_LEGACY_11B) { 2643 frm = ieee80211_add_htcap_vendor(frm, bss); 2644 frm = ieee80211_add_htinfo_vendor(frm, bss); 2645 } 2646#ifdef IEEE80211_SUPPORT_SUPERG 2647 if ((vap->iv_flags & IEEE80211_F_ATHEROS) && 2648 legacy != IEEE80211_SEND_LEGACY_11B) 2649 frm = ieee80211_add_athcaps(frm, bss); 2650#endif 2651 if (vap->iv_appie_proberesp != NULL) 2652 frm = add_appie(frm, vap->iv_appie_proberesp); 2653#ifdef IEEE80211_SUPPORT_MESH 2654 if (vap->iv_opmode == IEEE80211_M_MBSS) { 2655 frm = ieee80211_add_meshid(frm, vap); 2656 frm = ieee80211_add_meshconf(frm, vap); 2657 } 2658#endif 2659 m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); 2660 2661 return m; 2662} 2663 2664/* 2665 * Send a probe response frame to the specified mac address. 2666 * This does not go through the normal mgt frame api so we 2667 * can specify the destination address and re-use the bss node 2668 * for the sta reference. 2669 */ 2670int 2671ieee80211_send_proberesp(struct ieee80211vap *vap, 2672 const uint8_t da[IEEE80211_ADDR_LEN], int legacy) 2673{ 2674 struct ieee80211_node *bss = vap->iv_bss; 2675 struct ieee80211com *ic = vap->iv_ic; 2676 struct ieee80211_frame *wh; 2677 struct mbuf *m; 2678 int ret; 2679 2680 if (vap->iv_state == IEEE80211_S_CAC) { 2681 IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT, bss, 2682 "block %s frame in CAC state", "probe response"); 2683 vap->iv_stats.is_tx_badstate++; 2684 return EIO; /* XXX */ 2685 } 2686 2687 /* 2688 * Hold a reference on the node so it doesn't go away until after 2689 * the xmit is complete all the way in the driver. On error we 2690 * will remove our reference. 2691 */ 2692 IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, 2693 "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", 2694 __func__, __LINE__, bss, ether_sprintf(bss->ni_macaddr), 2695 ieee80211_node_refcnt(bss)+1); 2696 ieee80211_ref_node(bss); 2697 2698 m = ieee80211_alloc_proberesp(bss, legacy); 2699 if (m == NULL) { 2700 ieee80211_free_node(bss); 2701 return ENOMEM; 2702 } 2703 2704 M_PREPEND(m, sizeof(struct ieee80211_frame), M_NOWAIT); 2705 KASSERT(m != NULL, ("no room for header")); 2706 2707 IEEE80211_TX_LOCK(ic); 2708 wh = mtod(m, struct ieee80211_frame *); 2709 ieee80211_send_setup(bss, m, 2710 IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP, 2711 IEEE80211_NONQOS_TID, vap->iv_myaddr, da, bss->ni_bssid); 2712 /* XXX power management? */ 2713 m->m_flags |= M_ENCAP; /* mark encapsulated */ 2714 2715 M_WME_SETAC(m, WME_AC_BE); 2716 2717 IEEE80211_DPRINTF(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_DUMPPKTS, 2718 "send probe resp on channel %u to %s%s\n", 2719 ieee80211_chan2ieee(ic, ic->ic_curchan), ether_sprintf(da), 2720 legacy ? " <legacy>" : ""); 2721 IEEE80211_NODE_STAT(bss, tx_mgmt); 2722 2723 ret = ieee80211_raw_output(vap, bss, m, NULL); 2724 IEEE80211_TX_UNLOCK(ic); 2725 return (ret); 2726} 2727 2728/* 2729 * Allocate and build a RTS (Request To Send) control frame. 2730 */ 2731struct mbuf * 2732ieee80211_alloc_rts(struct ieee80211com *ic, 2733 const uint8_t ra[IEEE80211_ADDR_LEN], 2734 const uint8_t ta[IEEE80211_ADDR_LEN], 2735 uint16_t dur) 2736{ 2737 struct ieee80211_frame_rts *rts; 2738 struct mbuf *m; 2739 2740 /* XXX honor ic_headroom */ 2741 m = m_gethdr(M_NOWAIT, MT_DATA); 2742 if (m != NULL) { 2743 rts = mtod(m, struct ieee80211_frame_rts *); 2744 rts->i_fc[0] = IEEE80211_FC0_VERSION_0 | 2745 IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_RTS; 2746 rts->i_fc[1] = IEEE80211_FC1_DIR_NODS; 2747 *(u_int16_t *)rts->i_dur = htole16(dur); 2748 IEEE80211_ADDR_COPY(rts->i_ra, ra); 2749 IEEE80211_ADDR_COPY(rts->i_ta, ta); 2750 2751 m->m_pkthdr.len = m->m_len = sizeof(struct ieee80211_frame_rts); 2752 } 2753 return m; 2754} 2755 2756/* 2757 * Allocate and build a CTS (Clear To Send) control frame. 2758 */ 2759struct mbuf * 2760ieee80211_alloc_cts(struct ieee80211com *ic, 2761 const uint8_t ra[IEEE80211_ADDR_LEN], uint16_t dur) 2762{ 2763 struct ieee80211_frame_cts *cts; 2764 struct mbuf *m; 2765 2766 /* XXX honor ic_headroom */ 2767 m = m_gethdr(M_NOWAIT, MT_DATA); 2768 if (m != NULL) { 2769 cts = mtod(m, struct ieee80211_frame_cts *); 2770 cts->i_fc[0] = IEEE80211_FC0_VERSION_0 | 2771 IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_CTS; 2772 cts->i_fc[1] = IEEE80211_FC1_DIR_NODS; 2773 *(u_int16_t *)cts->i_dur = htole16(dur); 2774 IEEE80211_ADDR_COPY(cts->i_ra, ra); 2775 2776 m->m_pkthdr.len = m->m_len = sizeof(struct ieee80211_frame_cts); 2777 } 2778 return m; 2779} 2780 2781static void 2782ieee80211_tx_mgt_timeout(void *arg) 2783{ 2784 struct ieee80211vap *vap = arg; 2785 2786 IEEE80211_LOCK(vap->iv_ic); 2787 if (vap->iv_state != IEEE80211_S_INIT && 2788 (vap->iv_ic->ic_flags & IEEE80211_F_SCAN) == 0) { 2789 /* 2790 * NB: it's safe to specify a timeout as the reason here; 2791 * it'll only be used in the right state. 2792 */ 2793 ieee80211_new_state_locked(vap, IEEE80211_S_SCAN, 2794 IEEE80211_SCAN_FAIL_TIMEOUT); 2795 } 2796 IEEE80211_UNLOCK(vap->iv_ic); 2797} 2798 2799/* 2800 * This is the callback set on net80211-sourced transmitted 2801 * authentication request frames. 2802 * 2803 * This does a couple of things: 2804 * 2805 * + If the frame transmitted was a success, it schedules a future 2806 * event which will transition the interface to scan. 2807 * If a state transition _then_ occurs before that event occurs, 2808 * said state transition will cancel this callout. 2809 * 2810 * + If the frame transmit was a failure, it immediately schedules 2811 * the transition back to scan. 2812 */ 2813static void 2814ieee80211_tx_mgt_cb(struct ieee80211_node *ni, void *arg, int status) 2815{ 2816 struct ieee80211vap *vap = ni->ni_vap; 2817 enum ieee80211_state ostate = (enum ieee80211_state) arg; 2818 2819 /* 2820 * Frame transmit completed; arrange timer callback. If 2821 * transmit was successfuly we wait for response. Otherwise 2822 * we arrange an immediate callback instead of doing the 2823 * callback directly since we don't know what state the driver 2824 * is in (e.g. what locks it is holding). This work should 2825 * not be too time-critical and not happen too often so the 2826 * added overhead is acceptable. 2827 * 2828 * XXX what happens if !acked but response shows up before callback? 2829 */ 2830 if (vap->iv_state == ostate) { 2831 callout_reset(&vap->iv_mgtsend, 2832 status == 0 ? IEEE80211_TRANS_WAIT*hz : 0, 2833 ieee80211_tx_mgt_timeout, vap); 2834 } 2835} 2836 2837static void 2838ieee80211_beacon_construct(struct mbuf *m, uint8_t *frm, 2839 struct ieee80211_beacon_offsets *bo, struct ieee80211_node *ni) 2840{ 2841 struct ieee80211vap *vap = ni->ni_vap; 2842 struct ieee80211com *ic = ni->ni_ic; 2843 struct ieee80211_rateset *rs = &ni->ni_rates; 2844 uint16_t capinfo; 2845 2846 /* 2847 * beacon frame format 2848 * [8] time stamp 2849 * [2] beacon interval 2850 * [2] cabability information 2851 * [tlv] ssid 2852 * [tlv] supported rates 2853 * [3] parameter set (DS) 2854 * [8] CF parameter set (optional) 2855 * [tlv] parameter set (IBSS/TIM) 2856 * [tlv] country (optional) 2857 * [3] power control (optional) 2858 * [5] channel switch announcement (CSA) (optional) 2859 * [tlv] extended rate phy (ERP) 2860 * [tlv] extended supported rates 2861 * [tlv] RSN parameters 2862 * [tlv] HT capabilities 2863 * [tlv] HT information 2864 * XXX Vendor-specific OIDs (e.g. Atheros) 2865 * [tlv] WPA parameters 2866 * [tlv] WME parameters 2867 * [tlv] Vendor OUI HT capabilities (optional) 2868 * [tlv] Vendor OUI HT information (optional) 2869 * [tlv] Atheros capabilities (optional) 2870 * [tlv] TDMA parameters (optional) 2871 * [tlv] Mesh ID (MBSS) 2872 * [tlv] Mesh Conf (MBSS) 2873 * [tlv] application data (optional) 2874 */ 2875 2876 memset(bo, 0, sizeof(*bo)); 2877 2878 memset(frm, 0, 8); /* XXX timestamp is set by hardware/driver */ 2879 frm += 8; 2880 *(uint16_t *)frm = htole16(ni->ni_intval); 2881 frm += 2; 2882 capinfo = ieee80211_getcapinfo(vap, ni->ni_chan); 2883 bo->bo_caps = (uint16_t *)frm; 2884 *(uint16_t *)frm = htole16(capinfo); 2885 frm += 2; 2886 *frm++ = IEEE80211_ELEMID_SSID; 2887 if ((vap->iv_flags & IEEE80211_F_HIDESSID) == 0) { 2888 *frm++ = ni->ni_esslen; 2889 memcpy(frm, ni->ni_essid, ni->ni_esslen); 2890 frm += ni->ni_esslen; 2891 } else 2892 *frm++ = 0; 2893 frm = ieee80211_add_rates(frm, rs); 2894 if (!IEEE80211_IS_CHAN_FHSS(ni->ni_chan)) { 2895 *frm++ = IEEE80211_ELEMID_DSPARMS; 2896 *frm++ = 1; 2897 *frm++ = ieee80211_chan2ieee(ic, ni->ni_chan); 2898 } 2899 if (ic->ic_flags & IEEE80211_F_PCF) { 2900 bo->bo_cfp = frm; 2901 frm = ieee80211_add_cfparms(frm, ic); 2902 } 2903 bo->bo_tim = frm; 2904 if (vap->iv_opmode == IEEE80211_M_IBSS) { 2905 *frm++ = IEEE80211_ELEMID_IBSSPARMS; 2906 *frm++ = 2; 2907 *frm++ = 0; *frm++ = 0; /* TODO: ATIM window */ 2908 bo->bo_tim_len = 0; 2909 } else if (vap->iv_opmode == IEEE80211_M_HOSTAP || 2910 vap->iv_opmode == IEEE80211_M_MBSS) { 2911 /* TIM IE is the same for Mesh and Hostap */ 2912 struct ieee80211_tim_ie *tie = (struct ieee80211_tim_ie *) frm; 2913 2914 tie->tim_ie = IEEE80211_ELEMID_TIM; 2915 tie->tim_len = 4; /* length */ 2916 tie->tim_count = 0; /* DTIM count */ 2917 tie->tim_period = vap->iv_dtim_period; /* DTIM period */ 2918 tie->tim_bitctl = 0; /* bitmap control */ 2919 tie->tim_bitmap[0] = 0; /* Partial Virtual Bitmap */ 2920 frm += sizeof(struct ieee80211_tim_ie); 2921 bo->bo_tim_len = 1; 2922 } 2923 bo->bo_tim_trailer = frm; 2924 if ((vap->iv_flags & IEEE80211_F_DOTH) || 2925 (vap->iv_flags_ext & IEEE80211_FEXT_DOTD)) 2926 frm = ieee80211_add_countryie(frm, ic); 2927 if (vap->iv_flags & IEEE80211_F_DOTH) { 2928 if (IEEE80211_IS_CHAN_5GHZ(ni->ni_chan)) 2929 frm = ieee80211_add_powerconstraint(frm, vap); 2930 bo->bo_csa = frm; 2931 if (ic->ic_flags & IEEE80211_F_CSAPENDING) 2932 frm = ieee80211_add_csa(frm, vap); 2933 } else 2934 bo->bo_csa = frm; 2935 2936 if (vap->iv_flags & IEEE80211_F_DOTH) { 2937 bo->bo_quiet = frm; 2938 if (IEEE80211_IS_CHAN_DFS(ic->ic_bsschan) && 2939 (vap->iv_flags_ext & IEEE80211_FEXT_DFS)) { 2940 if (vap->iv_quiet) 2941 frm = ieee80211_add_quiet(frm,vap); 2942 } 2943 } else 2944 bo->bo_quiet = frm; 2945 2946 if (IEEE80211_IS_CHAN_ANYG(ni->ni_chan)) { 2947 bo->bo_erp = frm; 2948 frm = ieee80211_add_erp(frm, ic); 2949 } 2950 frm = ieee80211_add_xrates(frm, rs); 2951 frm = ieee80211_add_rsn(frm, vap); 2952 if (IEEE80211_IS_CHAN_HT(ni->ni_chan)) { 2953 frm = ieee80211_add_htcap(frm, ni); 2954 bo->bo_htinfo = frm; 2955 frm = ieee80211_add_htinfo(frm, ni); 2956 } 2957 frm = ieee80211_add_wpa(frm, vap); 2958 if (vap->iv_flags & IEEE80211_F_WME) { 2959 bo->bo_wme = frm; 2960 frm = ieee80211_add_wme_param(frm, &ic->ic_wme); 2961 } 2962 if (IEEE80211_IS_CHAN_HT(ni->ni_chan) && 2963 (vap->iv_flags_ht & IEEE80211_FHT_HTCOMPAT)) { 2964 frm = ieee80211_add_htcap_vendor(frm, ni); 2965 frm = ieee80211_add_htinfo_vendor(frm, ni); 2966 } 2967#ifdef IEEE80211_SUPPORT_SUPERG 2968 if (vap->iv_flags & IEEE80211_F_ATHEROS) { 2969 bo->bo_ath = frm; 2970 frm = ieee80211_add_athcaps(frm, ni); 2971 } 2972#endif 2973#ifdef IEEE80211_SUPPORT_TDMA 2974 if (vap->iv_caps & IEEE80211_C_TDMA) { 2975 bo->bo_tdma = frm; 2976 frm = ieee80211_add_tdma(frm, vap); 2977 } 2978#endif 2979 if (vap->iv_appie_beacon != NULL) { 2980 bo->bo_appie = frm; 2981 bo->bo_appie_len = vap->iv_appie_beacon->ie_len; 2982 frm = add_appie(frm, vap->iv_appie_beacon); 2983 } 2984#ifdef IEEE80211_SUPPORT_MESH 2985 if (vap->iv_opmode == IEEE80211_M_MBSS) { 2986 frm = ieee80211_add_meshid(frm, vap); 2987 bo->bo_meshconf = frm; 2988 frm = ieee80211_add_meshconf(frm, vap); 2989 } 2990#endif 2991 bo->bo_tim_trailer_len = frm - bo->bo_tim_trailer; 2992 bo->bo_csa_trailer_len = frm - bo->bo_csa; 2993 m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); 2994} 2995 2996/* 2997 * Allocate a beacon frame and fillin the appropriate bits. 2998 */ 2999struct mbuf * 3000ieee80211_beacon_alloc(struct ieee80211_node *ni, 3001 struct ieee80211_beacon_offsets *bo) 3002{ 3003 struct ieee80211vap *vap = ni->ni_vap; 3004 struct ieee80211com *ic = ni->ni_ic; 3005 struct ifnet *ifp = vap->iv_ifp; 3006 struct ieee80211_frame *wh; 3007 struct mbuf *m; 3008 int pktlen; 3009 uint8_t *frm; 3010 3011 /* 3012 * beacon frame format 3013 * [8] time stamp 3014 * [2] beacon interval 3015 * [2] cabability information 3016 * [tlv] ssid 3017 * [tlv] supported rates 3018 * [3] parameter set (DS) 3019 * [8] CF parameter set (optional) 3020 * [tlv] parameter set (IBSS/TIM) 3021 * [tlv] country (optional) 3022 * [3] power control (optional) 3023 * [5] channel switch announcement (CSA) (optional) 3024 * [tlv] extended rate phy (ERP) 3025 * [tlv] extended supported rates 3026 * [tlv] RSN parameters 3027 * [tlv] HT capabilities 3028 * [tlv] HT information 3029 * [tlv] Vendor OUI HT capabilities (optional) 3030 * [tlv] Vendor OUI HT information (optional) 3031 * XXX Vendor-specific OIDs (e.g. Atheros) 3032 * [tlv] WPA parameters 3033 * [tlv] WME parameters 3034 * [tlv] TDMA parameters (optional) 3035 * [tlv] Mesh ID (MBSS) 3036 * [tlv] Mesh Conf (MBSS) 3037 * [tlv] application data (optional) 3038 * NB: we allocate the max space required for the TIM bitmap. 3039 * XXX how big is this? 3040 */ 3041 pktlen = 8 /* time stamp */ 3042 + sizeof(uint16_t) /* beacon interval */ 3043 + sizeof(uint16_t) /* capabilities */ 3044 + 2 + ni->ni_esslen /* ssid */ 3045 + 2 + IEEE80211_RATE_SIZE /* supported rates */ 3046 + 2 + 1 /* DS parameters */ 3047 + 2 + 6 /* CF parameters */ 3048 + 2 + 4 + vap->iv_tim_len /* DTIM/IBSSPARMS */ 3049 + IEEE80211_COUNTRY_MAX_SIZE /* country */ 3050 + 2 + 1 /* power control */ 3051 + sizeof(struct ieee80211_csa_ie) /* CSA */ 3052 + sizeof(struct ieee80211_quiet_ie) /* Quiet */ 3053 + 2 + 1 /* ERP */ 3054 + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) 3055 + (vap->iv_caps & IEEE80211_C_WPA ? /* WPA 1+2 */ 3056 2*sizeof(struct ieee80211_ie_wpa) : 0) 3057 /* XXX conditional? */ 3058 + 4+2*sizeof(struct ieee80211_ie_htcap)/* HT caps */ 3059 + 4+2*sizeof(struct ieee80211_ie_htinfo)/* HT info */ 3060 + (vap->iv_caps & IEEE80211_C_WME ? /* WME */ 3061 sizeof(struct ieee80211_wme_param) : 0) 3062#ifdef IEEE80211_SUPPORT_SUPERG 3063 + sizeof(struct ieee80211_ath_ie) /* ATH */ 3064#endif 3065#ifdef IEEE80211_SUPPORT_TDMA 3066 + (vap->iv_caps & IEEE80211_C_TDMA ? /* TDMA */ 3067 sizeof(struct ieee80211_tdma_param) : 0) 3068#endif 3069#ifdef IEEE80211_SUPPORT_MESH 3070 + 2 + ni->ni_meshidlen 3071 + sizeof(struct ieee80211_meshconf_ie) 3072#endif 3073 + IEEE80211_MAX_APPIE 3074 ; 3075 m = ieee80211_getmgtframe(&frm, 3076 ic->ic_headroom + sizeof(struct ieee80211_frame), pktlen); 3077 if (m == NULL) { 3078 IEEE80211_DPRINTF(vap, IEEE80211_MSG_ANY, 3079 "%s: cannot get buf; size %u\n", __func__, pktlen); 3080 vap->iv_stats.is_tx_nobuf++; 3081 return NULL; 3082 } 3083 ieee80211_beacon_construct(m, frm, bo, ni); 3084 3085 M_PREPEND(m, sizeof(struct ieee80211_frame), M_NOWAIT); 3086 KASSERT(m != NULL, ("no space for 802.11 header?")); 3087 wh = mtod(m, struct ieee80211_frame *); 3088 wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | 3089 IEEE80211_FC0_SUBTYPE_BEACON; 3090 wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; 3091 *(uint16_t *)wh->i_dur = 0; 3092 IEEE80211_ADDR_COPY(wh->i_addr1, ifp->if_broadcastaddr); 3093 IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); 3094 IEEE80211_ADDR_COPY(wh->i_addr3, ni->ni_bssid); 3095 *(uint16_t *)wh->i_seq = 0; 3096 3097 return m; 3098} 3099 3100/* 3101 * Update the dynamic parts of a beacon frame based on the current state. 3102 */ 3103int 3104ieee80211_beacon_update(struct ieee80211_node *ni, 3105 struct ieee80211_beacon_offsets *bo, struct mbuf *m, int mcast) 3106{ 3107 struct ieee80211vap *vap = ni->ni_vap; 3108 struct ieee80211com *ic = ni->ni_ic; 3109 int len_changed = 0; 3110 uint16_t capinfo; 3111 struct ieee80211_frame *wh; 3112 ieee80211_seq seqno; 3113 3114 IEEE80211_LOCK(ic); 3115 /* 3116 * Handle 11h channel change when we've reached the count. 3117 * We must recalculate the beacon frame contents to account 3118 * for the new channel. Note we do this only for the first 3119 * vap that reaches this point; subsequent vaps just update 3120 * their beacon state to reflect the recalculated channel. 3121 */ 3122 if (isset(bo->bo_flags, IEEE80211_BEACON_CSA) && 3123 vap->iv_csa_count == ic->ic_csa_count) { 3124 vap->iv_csa_count = 0; 3125 /* 3126 * Effect channel change before reconstructing the beacon 3127 * frame contents as many places reference ni_chan. 3128 */ 3129 if (ic->ic_csa_newchan != NULL) 3130 ieee80211_csa_completeswitch(ic); 3131 /* 3132 * NB: ieee80211_beacon_construct clears all pending 3133 * updates in bo_flags so we don't need to explicitly 3134 * clear IEEE80211_BEACON_CSA. 3135 */ 3136 ieee80211_beacon_construct(m, 3137 mtod(m, uint8_t*) + sizeof(struct ieee80211_frame), bo, ni); 3138 3139 /* XXX do WME aggressive mode processing? */ 3140 IEEE80211_UNLOCK(ic); 3141 return 1; /* just assume length changed */ 3142 } 3143 3144 wh = mtod(m, struct ieee80211_frame *); 3145 seqno = ni->ni_txseqs[IEEE80211_NONQOS_TID]++; 3146 *(uint16_t *)&wh->i_seq[0] = 3147 htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT); 3148 M_SEQNO_SET(m, seqno); 3149 3150 /* XXX faster to recalculate entirely or just changes? */ 3151 capinfo = ieee80211_getcapinfo(vap, ni->ni_chan); 3152 *bo->bo_caps = htole16(capinfo); 3153 3154 if (vap->iv_flags & IEEE80211_F_WME) { 3155 struct ieee80211_wme_state *wme = &ic->ic_wme; 3156 3157 /* 3158 * Check for agressive mode change. When there is 3159 * significant high priority traffic in the BSS 3160 * throttle back BE traffic by using conservative 3161 * parameters. Otherwise BE uses agressive params 3162 * to optimize performance of legacy/non-QoS traffic. 3163 */ 3164 if (wme->wme_flags & WME_F_AGGRMODE) { 3165 if (wme->wme_hipri_traffic > 3166 wme->wme_hipri_switch_thresh) { 3167 IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME, 3168 "%s: traffic %u, disable aggressive mode\n", 3169 __func__, wme->wme_hipri_traffic); 3170 wme->wme_flags &= ~WME_F_AGGRMODE; 3171 ieee80211_wme_updateparams_locked(vap); 3172 wme->wme_hipri_traffic = 3173 wme->wme_hipri_switch_hysteresis; 3174 } else 3175 wme->wme_hipri_traffic = 0; 3176 } else { 3177 if (wme->wme_hipri_traffic <= 3178 wme->wme_hipri_switch_thresh) { 3179 IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME, 3180 "%s: traffic %u, enable aggressive mode\n", 3181 __func__, wme->wme_hipri_traffic); 3182 wme->wme_flags |= WME_F_AGGRMODE; 3183 ieee80211_wme_updateparams_locked(vap); 3184 wme->wme_hipri_traffic = 0; 3185 } else 3186 wme->wme_hipri_traffic = 3187 wme->wme_hipri_switch_hysteresis; 3188 } 3189 if (isset(bo->bo_flags, IEEE80211_BEACON_WME)) { 3190 (void) ieee80211_add_wme_param(bo->bo_wme, wme); 3191 clrbit(bo->bo_flags, IEEE80211_BEACON_WME); 3192 } 3193 } 3194 3195 if (isset(bo->bo_flags, IEEE80211_BEACON_HTINFO)) { 3196 ieee80211_ht_update_beacon(vap, bo); 3197 clrbit(bo->bo_flags, IEEE80211_BEACON_HTINFO); 3198 } 3199#ifdef IEEE80211_SUPPORT_TDMA 3200 if (vap->iv_caps & IEEE80211_C_TDMA) { 3201 /* 3202 * NB: the beacon is potentially updated every TBTT. 3203 */ 3204 ieee80211_tdma_update_beacon(vap, bo); 3205 } 3206#endif 3207#ifdef IEEE80211_SUPPORT_MESH 3208 if (vap->iv_opmode == IEEE80211_M_MBSS) 3209 ieee80211_mesh_update_beacon(vap, bo); 3210#endif 3211 3212 if (vap->iv_opmode == IEEE80211_M_HOSTAP || 3213 vap->iv_opmode == IEEE80211_M_MBSS) { /* NB: no IBSS support*/ 3214 struct ieee80211_tim_ie *tie = 3215 (struct ieee80211_tim_ie *) bo->bo_tim; 3216 if (isset(bo->bo_flags, IEEE80211_BEACON_TIM)) { 3217 u_int timlen, timoff, i; 3218 /* 3219 * ATIM/DTIM needs updating. If it fits in the 3220 * current space allocated then just copy in the 3221 * new bits. Otherwise we need to move any trailing 3222 * data to make room. Note that we know there is 3223 * contiguous space because ieee80211_beacon_allocate 3224 * insures there is space in the mbuf to write a 3225 * maximal-size virtual bitmap (based on iv_max_aid). 3226 */ 3227 /* 3228 * Calculate the bitmap size and offset, copy any 3229 * trailer out of the way, and then copy in the 3230 * new bitmap and update the information element. 3231 * Note that the tim bitmap must contain at least 3232 * one byte and any offset must be even. 3233 */ 3234 if (vap->iv_ps_pending != 0) { 3235 timoff = 128; /* impossibly large */ 3236 for (i = 0; i < vap->iv_tim_len; i++) 3237 if (vap->iv_tim_bitmap[i]) { 3238 timoff = i &~ 1; 3239 break; 3240 } 3241 KASSERT(timoff != 128, ("tim bitmap empty!")); 3242 for (i = vap->iv_tim_len-1; i >= timoff; i--) 3243 if (vap->iv_tim_bitmap[i]) 3244 break; 3245 timlen = 1 + (i - timoff); 3246 } else { 3247 timoff = 0; 3248 timlen = 1; 3249 } 3250 if (timlen != bo->bo_tim_len) { 3251 /* copy up/down trailer */ 3252 int adjust = tie->tim_bitmap+timlen 3253 - bo->bo_tim_trailer; 3254 ovbcopy(bo->bo_tim_trailer, 3255 bo->bo_tim_trailer+adjust, 3256 bo->bo_tim_trailer_len); 3257 bo->bo_tim_trailer += adjust; 3258 bo->bo_erp += adjust; 3259 bo->bo_htinfo += adjust; 3260#ifdef IEEE80211_SUPPORT_SUPERG 3261 bo->bo_ath += adjust; 3262#endif 3263#ifdef IEEE80211_SUPPORT_TDMA 3264 bo->bo_tdma += adjust; 3265#endif 3266#ifdef IEEE80211_SUPPORT_MESH 3267 bo->bo_meshconf += adjust; 3268#endif 3269 bo->bo_appie += adjust; 3270 bo->bo_wme += adjust; 3271 bo->bo_csa += adjust; 3272 bo->bo_quiet += adjust; 3273 bo->bo_tim_len = timlen; 3274 3275 /* update information element */ 3276 tie->tim_len = 3 + timlen; 3277 tie->tim_bitctl = timoff; 3278 len_changed = 1; 3279 } 3280 memcpy(tie->tim_bitmap, vap->iv_tim_bitmap + timoff, 3281 bo->bo_tim_len); 3282 3283 clrbit(bo->bo_flags, IEEE80211_BEACON_TIM); 3284 3285 IEEE80211_DPRINTF(vap, IEEE80211_MSG_POWER, 3286 "%s: TIM updated, pending %u, off %u, len %u\n", 3287 __func__, vap->iv_ps_pending, timoff, timlen); 3288 } 3289 /* count down DTIM period */ 3290 if (tie->tim_count == 0) 3291 tie->tim_count = tie->tim_period - 1; 3292 else 3293 tie->tim_count--; 3294 /* update state for buffered multicast frames on DTIM */ 3295 if (mcast && tie->tim_count == 0) 3296 tie->tim_bitctl |= 1; 3297 else 3298 tie->tim_bitctl &= ~1; 3299 if (isset(bo->bo_flags, IEEE80211_BEACON_CSA)) { 3300 struct ieee80211_csa_ie *csa = 3301 (struct ieee80211_csa_ie *) bo->bo_csa; 3302 3303 /* 3304 * Insert or update CSA ie. If we're just starting 3305 * to count down to the channel switch then we need 3306 * to insert the CSA ie. Otherwise we just need to 3307 * drop the count. The actual change happens above 3308 * when the vap's count reaches the target count. 3309 */ 3310 if (vap->iv_csa_count == 0) { 3311 memmove(&csa[1], csa, bo->bo_csa_trailer_len); 3312 bo->bo_erp += sizeof(*csa); 3313 bo->bo_htinfo += sizeof(*csa); 3314 bo->bo_wme += sizeof(*csa); 3315#ifdef IEEE80211_SUPPORT_SUPERG 3316 bo->bo_ath += sizeof(*csa); 3317#endif 3318#ifdef IEEE80211_SUPPORT_TDMA 3319 bo->bo_tdma += sizeof(*csa); 3320#endif 3321#ifdef IEEE80211_SUPPORT_MESH 3322 bo->bo_meshconf += sizeof(*csa); 3323#endif 3324 bo->bo_appie += sizeof(*csa); 3325 bo->bo_csa_trailer_len += sizeof(*csa); 3326 bo->bo_quiet += sizeof(*csa); 3327 bo->bo_tim_trailer_len += sizeof(*csa); 3328 m->m_len += sizeof(*csa); 3329 m->m_pkthdr.len += sizeof(*csa); 3330 3331 ieee80211_add_csa(bo->bo_csa, vap); 3332 } else 3333 csa->csa_count--; 3334 vap->iv_csa_count++; 3335 /* NB: don't clear IEEE80211_BEACON_CSA */ 3336 } 3337 if (IEEE80211_IS_CHAN_DFS(ic->ic_bsschan) && 3338 (vap->iv_flags_ext & IEEE80211_FEXT_DFS) ){ 3339 if (vap->iv_quiet) 3340 ieee80211_add_quiet(bo->bo_quiet, vap); 3341 } 3342 if (isset(bo->bo_flags, IEEE80211_BEACON_ERP)) { 3343 /* 3344 * ERP element needs updating. 3345 */ 3346 (void) ieee80211_add_erp(bo->bo_erp, ic); 3347 clrbit(bo->bo_flags, IEEE80211_BEACON_ERP); 3348 } 3349#ifdef IEEE80211_SUPPORT_SUPERG 3350 if (isset(bo->bo_flags, IEEE80211_BEACON_ATH)) { 3351 ieee80211_add_athcaps(bo->bo_ath, ni); 3352 clrbit(bo->bo_flags, IEEE80211_BEACON_ATH); 3353 } 3354#endif 3355 } 3356 if (isset(bo->bo_flags, IEEE80211_BEACON_APPIE)) { 3357 const struct ieee80211_appie *aie = vap->iv_appie_beacon; 3358 int aielen; 3359 uint8_t *frm; 3360 3361 aielen = 0; 3362 if (aie != NULL) 3363 aielen += aie->ie_len; 3364 if (aielen != bo->bo_appie_len) { 3365 /* copy up/down trailer */ 3366 int adjust = aielen - bo->bo_appie_len; 3367 ovbcopy(bo->bo_tim_trailer, bo->bo_tim_trailer+adjust, 3368 bo->bo_tim_trailer_len); 3369 bo->bo_tim_trailer += adjust; 3370 bo->bo_appie += adjust; 3371 bo->bo_appie_len = aielen; 3372 3373 len_changed = 1; 3374 } 3375 frm = bo->bo_appie; 3376 if (aie != NULL) 3377 frm = add_appie(frm, aie); 3378 clrbit(bo->bo_flags, IEEE80211_BEACON_APPIE); 3379 } 3380 IEEE80211_UNLOCK(ic); 3381 3382 return len_changed; 3383} 3384 3385/* 3386 * Do Ethernet-LLC encapsulation for each payload in a fast frame 3387 * tunnel encapsulation. The frame is assumed to have an Ethernet 3388 * header at the front that must be stripped before prepending the 3389 * LLC followed by the Ethernet header passed in (with an Ethernet 3390 * type that specifies the payload size). 3391 */ 3392struct mbuf * 3393ieee80211_ff_encap1(struct ieee80211vap *vap, struct mbuf *m, 3394 const struct ether_header *eh) 3395{ 3396 struct llc *llc; 3397 uint16_t payload; 3398 3399 /* XXX optimize by combining m_adj+M_PREPEND */ 3400 m_adj(m, sizeof(struct ether_header) - sizeof(struct llc)); 3401 llc = mtod(m, struct llc *); 3402 llc->llc_dsap = llc->llc_ssap = LLC_SNAP_LSAP; 3403 llc->llc_control = LLC_UI; 3404 llc->llc_snap.org_code[0] = 0; 3405 llc->llc_snap.org_code[1] = 0; 3406 llc->llc_snap.org_code[2] = 0; 3407 llc->llc_snap.ether_type = eh->ether_type; 3408 payload = m->m_pkthdr.len; /* NB: w/o Ethernet header */ 3409 3410 M_PREPEND(m, sizeof(struct ether_header), M_NOWAIT); 3411 if (m == NULL) { /* XXX cannot happen */ 3412 IEEE80211_DPRINTF(vap, IEEE80211_MSG_SUPERG, 3413 "%s: no space for ether_header\n", __func__); 3414 vap->iv_stats.is_tx_nobuf++; 3415 return NULL; 3416 } 3417 ETHER_HEADER_COPY(mtod(m, void *), eh); 3418 mtod(m, struct ether_header *)->ether_type = htons(payload); 3419 return m; 3420} 3421 3422/* 3423 * Complete an mbuf transmission. 3424 * 3425 * For now, this simply processes a completed frame after the 3426 * driver has completed it's transmission and/or retransmission. 3427 * It assumes the frame is an 802.11 encapsulated frame. 3428 * 3429 * Later on it will grow to become the exit path for a given frame 3430 * from the driver and, depending upon how it's been encapsulated 3431 * and already transmitted, it may end up doing A-MPDU retransmission, 3432 * power save requeuing, etc. 3433 * 3434 * In order for the above to work, the driver entry point to this 3435 * must not hold any driver locks. Thus, the driver needs to delay 3436 * any actual mbuf completion until it can release said locks. 3437 * 3438 * This frees the mbuf and if the mbuf has a node reference, 3439 * the node reference will be freed. 3440 */ 3441void 3442ieee80211_tx_complete(struct ieee80211_node *ni, struct mbuf *m, int status) 3443{ 3444 3445 if (ni != NULL) { 3446 if (m->m_flags & M_TXCB) 3447 ieee80211_process_callback(ni, m, status); 3448 ieee80211_free_node(ni); 3449 } 3450 m_freem(m); 3451} 3452