xref: /freebsd-11.0-release/sys/mips/atheros/ar724xreg.h

/*-
 * Copyright (c) 2010 Adrian Chadd
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

/* $FreeBSD: head/sys/mips/atheros/ar724xreg.h 211440 2010-08-18 00:26:14Z adrian $ */

#ifndef	__AR72XX_REG_H__
#define	__AR72XX_REG_H__

#define	AR724X_PLL_REG_CPU_CONFIG	AR71XX_PLL_CPU_BASE + 0x00
#define	AR724X_PLL_REG_PCIE_CONFIG	AR71XX_PLL_CPU_BASE + 0x18

#define	AR724X_PLL_DIV_SHIFT		0
#define	AR724X_PLL_DIV_MASK		0x3ff
#define	AR724X_PLL_REF_DIV_SHIFT	10
#define	AR724X_PLL_REF_DIV_MASK		0xf
#define	AR724X_AHB_DIV_SHIFT		19
#define	AR724X_AHB_DIV_MASK		0x1
#define	AR724X_DDR_DIV_SHIFT		22
#define	AR724X_DDR_DIV_MASK		0x3

#define	AR724X_PLL_VAL_1000		0x00110000
#define	AR724X_PLL_VAL_100		0x00001099
#define	AR724X_PLL_VAL_10		0x00991099

#define	AR724X_BASE_FREQ		5000000

/* XXX so USB requires different init code? -adrian */
#define	AR7240_OHCI_BASE		0x1b000000
#define	AR7240_OHCI_SIZE		0x01000000
#define	AR724X_DDR_REG_FLUSH_USB	(AR71XX_DDR_CONFIG + 0x84)

#define	AR724X_PCI_CRP_BASE		(AR71XX_APB_BASE + 0x000C0000)
#define	AR724X_PCI_CRP_SIZE		0x100

#define	AR724X_PCI_CTRL_BASE		(AR71XX_APB_BASE + 0x000F0000)
#define	AR724X_PCI_CTRL_SIZE		0x100

#define	AR724X_GPIO_FUNC_GE0_MII_CLK_EN		(1 >> 19)
#define	AR724X_GPIO_FUNC_SPI_EN			(1 >> 18)
#define	AR724X_GPIO_FUNC_SPI_CS_EN2		(1 >> 14)
#define	AR724X_GPIO_FUNC_SPI_CS_EN1		(1 >> 13)
#define	AR724X_GPIO_FUNC_CLK_OBS5_EN		(1 >> 12)
#define	AR724X_GPIO_FUNC_CLK_OBS4_EN		(1 >> 11)
#define	AR724X_GPIO_FUNC_CLK_OBS3_EN		(1 >> 10)
#define	AR724X_GPIO_FUNC_CLK_OBS2_EN		(1 >> 9)
#define	AR724X_GPIO_FUNC_CLK_OBS1_EN		(1 >> 8)
#define	AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN	(1 >> 7)
#define	AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN	(1 >> 6)
#define	AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN	(1 >> 5)
#define	AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN	(1 >> 4)
#define	AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN	(1 >> 3)
#define	AR724X_GPIO_FUNC_UART_RTS_CTS_EN	(1 >> 2)
#define	AR724X_GPIO_FUNC_UART_EN		(1 >> 1)
#define	AR724X_GPIO_FUNC_JTAG_DISABLE		(1 >> 0)

#define	AR724X_GPIO_COUNT		18

#endif