imx31.dtsi revision 279377
1/* 2 * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> 3 * 4 * The code contained herein is licensed under the GNU General Public 5 * License. You may obtain a copy of the GNU General Public License 6 * Version 2 or later at the following locations: 7 * 8 * http://www.opensource.org/licenses/gpl-license.html 9 * http://www.gnu.org/copyleft/gpl.html 10 */ 11 12#include "skeleton.dtsi" 13 14/ { 15 aliases { 16 serial0 = &uart1; 17 serial1 = &uart2; 18 serial2 = &uart3; 19 serial3 = &uart4; 20 serial4 = &uart5; 21 }; 22 23 cpus { 24 #address-cells = <0>; 25 #size-cells = <0>; 26 27 cpu { 28 compatible = "arm,arm1136"; 29 device_type = "cpu"; 30 }; 31 }; 32 33 avic: avic-interrupt-controller@60000000 { 34 compatible = "fsl,imx31-avic", "fsl,avic"; 35 interrupt-controller; 36 #interrupt-cells = <1>; 37 reg = <0x60000000 0x100000>; 38 }; 39 40 soc { 41 #address-cells = <1>; 42 #size-cells = <1>; 43 compatible = "simple-bus"; 44 interrupt-parent = <&avic>; 45 ranges; 46 47 aips@43f00000 { /* AIPS1 */ 48 compatible = "fsl,aips-bus", "simple-bus"; 49 #address-cells = <1>; 50 #size-cells = <1>; 51 reg = <0x43f00000 0x100000>; 52 ranges; 53 54 uart1: serial@43f90000 { 55 compatible = "fsl,imx31-uart", "fsl,imx21-uart"; 56 reg = <0x43f90000 0x4000>; 57 interrupts = <45>; 58 clocks = <&clks 10>, <&clks 30>; 59 clock-names = "ipg", "per"; 60 status = "disabled"; 61 }; 62 63 uart2: serial@43f94000 { 64 compatible = "fsl,imx31-uart", "fsl,imx21-uart"; 65 reg = <0x43f94000 0x4000>; 66 interrupts = <32>; 67 clocks = <&clks 10>, <&clks 31>; 68 clock-names = "ipg", "per"; 69 status = "disabled"; 70 }; 71 72 uart4: serial@43fb0000 { 73 compatible = "fsl,imx31-uart", "fsl,imx21-uart"; 74 reg = <0x43fb0000 0x4000>; 75 clocks = <&clks 10>, <&clks 49>; 76 clock-names = "ipg", "per"; 77 interrupts = <46>; 78 status = "disabled"; 79 }; 80 81 uart5: serial@43fb4000 { 82 compatible = "fsl,imx31-uart", "fsl,imx21-uart"; 83 reg = <0x43fb4000 0x4000>; 84 interrupts = <47>; 85 clocks = <&clks 10>, <&clks 50>; 86 clock-names = "ipg", "per"; 87 status = "disabled"; 88 }; 89 }; 90 91 spba@50000000 { 92 compatible = "fsl,spba-bus", "simple-bus"; 93 #address-cells = <1>; 94 #size-cells = <1>; 95 reg = <0x50000000 0x100000>; 96 ranges; 97 98 uart3: serial@5000c000 { 99 compatible = "fsl,imx31-uart", "fsl,imx21-uart"; 100 reg = <0x5000c000 0x4000>; 101 interrupts = <18>; 102 clocks = <&clks 10>, <&clks 48>; 103 clock-names = "ipg", "per"; 104 status = "disabled"; 105 }; 106 107 iim: iim@5001c000 { 108 compatible = "fsl,imx31-iim", "fsl,imx27-iim"; 109 reg = <0x5001c000 0x1000>; 110 interrupts = <19>; 111 clocks = <&clks 25>; 112 }; 113 114 clks: ccm@53f80000{ 115 compatible = "fsl,imx31-ccm"; 116 reg = <0x53f80000 0x4000>; 117 interrupts = <0 31 0x04 0 53 0x04>; 118 #clock-cells = <1>; 119 }; 120 }; 121 122 aips@53f00000 { /* AIPS2 */ 123 compatible = "fsl,aips-bus", "simple-bus"; 124 #address-cells = <1>; 125 #size-cells = <1>; 126 reg = <0x53f00000 0x100000>; 127 ranges; 128 129 gpt: timer@53f90000 { 130 compatible = "fsl,imx31-gpt"; 131 reg = <0x53f90000 0x4000>; 132 interrupts = <29>; 133 clocks = <&clks 10>, <&clks 22>; 134 clock-names = "ipg", "per"; 135 }; 136 }; 137 }; 138}; 139