imx25-pdk.dts revision 295436
1/* 2 * Copyright 2013 Freescale Semiconductor, Inc. 3 * 4 * The code contained herein is licensed under the GNU General Public 5 * License. You may obtain a copy of the GNU General Public License 6 * Version 2 or later at the following locations: 7 * 8 * http://www.opensource.org/licenses/gpl-license.html 9 * http://www.gnu.org/copyleft/gpl.html 10 */ 11 12/dts-v1/; 13#include <dt-bindings/gpio/gpio.h> 14#include <dt-bindings/input/input.h> 15#include "imx25.dtsi" 16 17/ { 18 model = "Freescale i.MX25 Product Development Kit"; 19 compatible = "fsl,imx25-pdk", "fsl,imx25"; 20 21 memory { 22 reg = <0x80000000 0x4000000>; 23 }; 24 25 regulators { 26 compatible = "simple-bus"; 27 #address-cells = <1>; 28 #size-cells = <0>; 29 30 reg_fec_3v3: regulator@0 { 31 compatible = "regulator-fixed"; 32 reg = <0>; 33 regulator-name = "fec-3v3"; 34 regulator-min-microvolt = <3300000>; 35 regulator-max-microvolt = <3300000>; 36 gpio = <&gpio2 3 0>; 37 enable-active-high; 38 }; 39 40 reg_2p5v: regulator@1 { 41 compatible = "regulator-fixed"; 42 reg = <1>; 43 regulator-name = "2P5V"; 44 regulator-min-microvolt = <2500000>; 45 regulator-max-microvolt = <2500000>; 46 }; 47 48 reg_3p3v: regulator@2 { 49 compatible = "regulator-fixed"; 50 reg = <2>; 51 regulator-name = "3P3V"; 52 regulator-min-microvolt = <3300000>; 53 regulator-max-microvolt = <3300000>; 54 }; 55 56 reg_can_3v3: regulator@3 { 57 compatible = "regulator-fixed"; 58 reg = <3>; 59 regulator-name = "can-3v3"; 60 regulator-min-microvolt = <3300000>; 61 regulator-max-microvolt = <3300000>; 62 gpio = <&gpio4 6 0>; 63 }; 64 }; 65 66 sound { 67 compatible = "fsl,imx25-pdk-sgtl5000", 68 "fsl,imx-audio-sgtl5000"; 69 model = "imx25-pdk-sgtl5000"; 70 ssi-controller = <&ssi1>; 71 audio-codec = <&codec>; 72 audio-routing = 73 "MIC_IN", "Mic Jack", 74 "Mic Jack", "Mic Bias", 75 "Headphone Jack", "HP_OUT"; 76 mux-int-port = <1>; 77 mux-ext-port = <4>; 78 }; 79 80 wvga: display { 81 model = "CLAA057VC01CW"; 82 bits-per-pixel = <16>; 83 fsl,pcr = <0xfa208b80>; 84 bus-width = <18>; 85 native-mode = <&wvga_timings>; 86 display-timings { 87 wvga_timings: 640x480 { 88 hactive = <640>; 89 vactive = <480>; 90 hback-porch = <45>; 91 hfront-porch = <114>; 92 hsync-len = <1>; 93 vback-porch = <33>; 94 vfront-porch = <11>; 95 vsync-len = <1>; 96 clock-frequency = <25200000>; 97 }; 98 }; 99 }; 100}; 101 102&audmux { 103 pinctrl-names = "default"; 104 pinctrl-0 = <&pinctrl_audmux>; 105 status = "okay"; 106}; 107 108&can1 { 109 pinctrl-names = "default"; 110 pinctrl-0 = <&pinctrl_can1>; 111 xceiver-supply = <®_can_3v3>; 112 status = "okay"; 113}; 114 115&esdhc1 { 116 pinctrl-names = "default"; 117 pinctrl-0 = <&pinctrl_esdhc1>; 118 cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; 119 wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; 120 status = "okay"; 121}; 122 123&fec { 124 phy-mode = "rmii"; 125 pinctrl-names = "default"; 126 pinctrl-0 = <&pinctrl_fec>; 127 phy-supply = <®_fec_3v3>; 128 phy-reset-gpios = <&gpio4 8 0>; 129 status = "okay"; 130}; 131 132&i2c1 { 133 clock-frequency = <100000>; 134 pinctrl-names = "default"; 135 pinctrl-0 = <&pinctrl_i2c1>; 136 status = "okay"; 137 138 codec: sgtl5000@0a { 139 compatible = "fsl,sgtl5000"; 140 reg = <0x0a>; 141 clocks = <&clks 129>; 142 VDDA-supply = <®_2p5v>; 143 VDDIO-supply = <®_3p3v>; 144 }; 145}; 146 147&iomuxc { 148 imx25-pdk { 149 pinctrl_audmux: audmuxgrp { 150 fsl,pins = < 151 MX25_PAD_RW__AUD4_TXFS 0xe0 152 MX25_PAD_OE__AUD4_TXC 0xe0 153 MX25_PAD_EB0__AUD4_TXD 0xe0 154 MX25_PAD_EB1__AUD4_RXD 0xe0 155 >; 156 }; 157 158 pinctrl_can1: can1grp { 159 fsl,pins = < 160 MX25_PAD_GPIO_A__CAN1_TX 0x0 161 MX25_PAD_GPIO_B__CAN1_RX 0x0 162 MX25_PAD_D14__GPIO_4_6 0x80000000 163 >; 164 }; 165 166 pinctrl_esdhc1: esdhc1grp { 167 fsl,pins = < 168 MX25_PAD_SD1_CMD__SD1_CMD 0x80000000 169 MX25_PAD_SD1_CLK__SD1_CLK 0x80000000 170 MX25_PAD_SD1_DATA0__SD1_DATA0 0x80000000 171 MX25_PAD_SD1_DATA1__SD1_DATA1 0x80000000 172 MX25_PAD_SD1_DATA2__SD1_DATA2 0x80000000 173 MX25_PAD_SD1_DATA3__SD1_DATA3 0x80000000 174 MX25_PAD_A14__GPIO_2_0 0x80000000 175 MX25_PAD_A15__GPIO_2_1 0x80000000 176 >; 177 }; 178 179 pinctrl_fec: fecgrp { 180 fsl,pins = < 181 MX25_PAD_FEC_MDC__FEC_MDC 0x80000000 182 MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0 183 MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000 184 MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000 185 MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 186 MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000 187 MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000 188 MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 189 MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0 190 MX25_PAD_A17__GPIO_2_3 0x80000000 191 MX25_PAD_D12__GPIO_4_8 0x80000000 192 >; 193 }; 194 195 pinctrl_i2c1: i2c1grp { 196 fsl,pins = < 197 MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000 198 MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000 199 >; 200 }; 201 202 pinctrl_kpp: kppgrp { 203 fsl,pins = < 204 MX25_PAD_KPP_ROW0__KPP_ROW0 0x80000000 205 MX25_PAD_KPP_ROW1__KPP_ROW1 0x80000000 206 MX25_PAD_KPP_ROW2__KPP_ROW2 0x80000000 207 MX25_PAD_KPP_ROW3__KPP_ROW3 0x80000000 208 MX25_PAD_KPP_COL0__KPP_COL0 0x80000000 209 MX25_PAD_KPP_COL1__KPP_COL1 0x80000000 210 MX25_PAD_KPP_COL2__KPP_COL2 0x80000000 211 MX25_PAD_KPP_COL3__KPP_COL3 0x80000000 212 >; 213 }; 214 215 pinctrl_lcd: lcdgrp { 216 fsl,pins = < 217 MX25_PAD_LD0__LD0 0xe0 218 MX25_PAD_LD1__LD1 0xe0 219 MX25_PAD_LD2__LD2 0xe0 220 MX25_PAD_LD3__LD3 0xe0 221 MX25_PAD_LD4__LD4 0xe0 222 MX25_PAD_LD5__LD5 0xe0 223 MX25_PAD_LD6__LD6 0xe0 224 MX25_PAD_LD7__LD7 0xe0 225 MX25_PAD_LD8__LD8 0xe0 226 MX25_PAD_LD9__LD9 0xe0 227 MX25_PAD_LD10__LD10 0xe0 228 MX25_PAD_LD11__LD11 0xe0 229 MX25_PAD_LD12__LD12 0xe0 230 MX25_PAD_LD13__LD13 0xe0 231 MX25_PAD_LD14__LD14 0xe0 232 MX25_PAD_LD15__LD15 0xe0 233 MX25_PAD_GPIO_E__LD16 0xe0 234 MX25_PAD_GPIO_F__LD17 0xe0 235 MX25_PAD_HSYNC__HSYNC 0xe0 236 MX25_PAD_VSYNC__VSYNC 0xe0 237 MX25_PAD_LSCLK__LSCLK 0xe0 238 MX25_PAD_OE_ACD__OE_ACD 0xe0 239 MX25_PAD_CONTRAST__CONTRAST 0xe0 240 >; 241 }; 242 243 pinctrl_uart1: uart1grp { 244 fsl,pins = < 245 MX25_PAD_UART1_RTS__UART1_RTS 0xe0 246 MX25_PAD_UART1_CTS__UART1_CTS 0xe0 247 MX25_PAD_UART1_TXD__UART1_TXD 0x80000000 248 MX25_PAD_UART1_RXD__UART1_RXD 0xc0 249 >; 250 }; 251 }; 252}; 253 254&lcdc { 255 display = <&wvga>; 256 fsl,lpccr = <0x00a903ff>; 257 fsl,lscr1 = <0x00120300>; 258 fsl,dmacr = <0x00020010>; 259 pinctrl-names = "default"; 260 pinctrl-0 = <&pinctrl_lcd>; 261 status = "okay"; 262}; 263 264&nfc { 265 nand-on-flash-bbt; 266 status = "okay"; 267}; 268 269&kpp { 270 pinctrl-names = "default"; 271 pinctrl-0 = <&pinctrl_kpp>; 272 linux,keymap = < 273 MATRIX_KEY(0x0, 0x0, KEY_UP) 274 MATRIX_KEY(0x0, 0x1, KEY_DOWN) 275 MATRIX_KEY(0x0, 0x2, KEY_VOLUMEDOWN) 276 MATRIX_KEY(0x0, 0x3, KEY_HOME) 277 MATRIX_KEY(0x1, 0x0, KEY_RIGHT) 278 MATRIX_KEY(0x1, 0x1, KEY_LEFT) 279 MATRIX_KEY(0x1, 0x2, KEY_ENTER) 280 MATRIX_KEY(0x1, 0x3, KEY_VOLUMEUP) 281 MATRIX_KEY(0x2, 0x0, KEY_F6) 282 MATRIX_KEY(0x2, 0x1, KEY_F8) 283 MATRIX_KEY(0x2, 0x2, KEY_F9) 284 MATRIX_KEY(0x2, 0x3, KEY_F10) 285 MATRIX_KEY(0x3, 0x0, KEY_F1) 286 MATRIX_KEY(0x3, 0x1, KEY_F2) 287 MATRIX_KEY(0x3, 0x2, KEY_F3) 288 MATRIX_KEY(0x3, 0x2, KEY_POWER) 289 >; 290 status = "okay"; 291}; 292 293&ssi1 { 294 codec-handle = <&codec>; 295 status = "okay"; 296}; 297 298&uart1 { 299 pinctrl-names = "default"; 300 pinctrl-0 = <&pinctrl_uart1>; 301 fsl,uart-has-rtscts; 302 status = "okay"; 303}; 304 305&usbhost1 { 306 phy_type = "serial"; 307 dr_mode = "host"; 308 status = "okay"; 309}; 310 311&usbotg { 312 phy_type = "utmi"; 313 dr_mode = "otg"; 314 external-vbus-divider; 315 status = "okay"; 316}; 317