imx25-pdk.dts revision 279385
1/* 2 * Copyright 2013 Freescale Semiconductor, Inc. 3 * 4 * The code contained herein is licensed under the GNU General Public 5 * License. You may obtain a copy of the GNU General Public License 6 * Version 2 or later at the following locations: 7 * 8 * http://www.opensource.org/licenses/gpl-license.html 9 * http://www.gnu.org/copyleft/gpl.html 10 */ 11 12/dts-v1/; 13#include <dt-bindings/input/input.h> 14#include "imx25.dtsi" 15 16/ { 17 model = "Freescale i.MX25 Product Development Kit"; 18 compatible = "fsl,imx25-pdk", "fsl,imx25"; 19 20 memory { 21 reg = <0x80000000 0x4000000>; 22 }; 23 24 regulators { 25 compatible = "simple-bus"; 26 #address-cells = <1>; 27 #size-cells = <0>; 28 29 reg_fec_3v3: regulator@0 { 30 compatible = "regulator-fixed"; 31 reg = <0>; 32 regulator-name = "fec-3v3"; 33 regulator-min-microvolt = <3300000>; 34 regulator-max-microvolt = <3300000>; 35 gpio = <&gpio2 3 0>; 36 enable-active-high; 37 }; 38 39 reg_2p5v: regulator@1 { 40 compatible = "regulator-fixed"; 41 reg = <1>; 42 regulator-name = "2P5V"; 43 regulator-min-microvolt = <2500000>; 44 regulator-max-microvolt = <2500000>; 45 }; 46 47 reg_3p3v: regulator@2 { 48 compatible = "regulator-fixed"; 49 reg = <2>; 50 regulator-name = "3P3V"; 51 regulator-min-microvolt = <3300000>; 52 regulator-max-microvolt = <3300000>; 53 }; 54 55 reg_can_3v3: regulator@3 { 56 compatible = "regulator-fixed"; 57 reg = <3>; 58 regulator-name = "can-3v3"; 59 regulator-min-microvolt = <3300000>; 60 regulator-max-microvolt = <3300000>; 61 gpio = <&gpio4 6 0>; 62 }; 63 }; 64 65 sound { 66 compatible = "fsl,imx25-pdk-sgtl5000", 67 "fsl,imx-audio-sgtl5000"; 68 model = "imx25-pdk-sgtl5000"; 69 ssi-controller = <&ssi1>; 70 audio-codec = <&codec>; 71 audio-routing = 72 "MIC_IN", "Mic Jack", 73 "Mic Jack", "Mic Bias", 74 "Headphone Jack", "HP_OUT"; 75 mux-int-port = <1>; 76 mux-ext-port = <4>; 77 }; 78}; 79 80&audmux { 81 pinctrl-names = "default"; 82 pinctrl-0 = <&pinctrl_audmux>; 83 status = "okay"; 84}; 85 86&can1 { 87 pinctrl-names = "default"; 88 pinctrl-0 = <&pinctrl_can1>; 89 xceiver-supply = <®_can_3v3>; 90 status = "okay"; 91}; 92 93&esdhc1 { 94 pinctrl-names = "default"; 95 pinctrl-0 = <&pinctrl_esdhc1>; 96 cd-gpios = <&gpio2 1 0>; 97 wp-gpios = <&gpio2 0 0>; 98 status = "okay"; 99}; 100 101&fec { 102 phy-mode = "rmii"; 103 pinctrl-names = "default"; 104 pinctrl-0 = <&pinctrl_fec>; 105 phy-supply = <®_fec_3v3>; 106 phy-reset-gpios = <&gpio4 8 0>; 107 status = "okay"; 108}; 109 110&i2c1 { 111 clock-frequency = <100000>; 112 pinctrl-names = "default"; 113 pinctrl-0 = <&pinctrl_i2c1>; 114 status = "okay"; 115 116 codec: sgtl5000@0a { 117 compatible = "fsl,sgtl5000"; 118 reg = <0x0a>; 119 clocks = <&clks 129>; 120 VDDA-supply = <®_2p5v>; 121 VDDIO-supply = <®_3p3v>; 122 }; 123}; 124 125&iomuxc { 126 imx25-pdk { 127 pinctrl_audmux: audmuxgrp { 128 fsl,pins = < 129 MX25_PAD_RW__AUD4_TXFS 0xe0 130 MX25_PAD_OE__AUD4_TXC 0xe0 131 MX25_PAD_EB0__AUD4_TXD 0xe0 132 MX25_PAD_EB1__AUD4_RXD 0xe0 133 >; 134 }; 135 136 pinctrl_can1: can1grp { 137 fsl,pins = < 138 MX25_PAD_GPIO_A__CAN1_TX 0x0 139 MX25_PAD_GPIO_B__CAN1_RX 0x0 140 MX25_PAD_D14__GPIO_4_6 0x80000000 141 >; 142 }; 143 144 pinctrl_esdhc1: esdhc1grp { 145 fsl,pins = < 146 MX25_PAD_SD1_CMD__SD1_CMD 0x80000000 147 MX25_PAD_SD1_CLK__SD1_CLK 0x80000000 148 MX25_PAD_SD1_DATA0__SD1_DATA0 0x80000000 149 MX25_PAD_SD1_DATA1__SD1_DATA1 0x80000000 150 MX25_PAD_SD1_DATA2__SD1_DATA2 0x80000000 151 MX25_PAD_SD1_DATA3__SD1_DATA3 0x80000000 152 MX25_PAD_A14__GPIO_2_0 0x80000000 153 MX25_PAD_A15__GPIO_2_1 0x80000000 154 >; 155 }; 156 157 pinctrl_fec: fecgrp { 158 fsl,pins = < 159 MX25_PAD_FEC_MDC__FEC_MDC 0x80000000 160 MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0 161 MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000 162 MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000 163 MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 164 MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000 165 MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000 166 MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 167 MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0 168 MX25_PAD_A17__GPIO_2_3 0x80000000 169 MX25_PAD_D12__GPIO_4_8 0x80000000 170 >; 171 }; 172 173 pinctrl_i2c1: i2c1grp { 174 fsl,pins = < 175 MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000 176 MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000 177 >; 178 }; 179 180 pinctrl_kpp: kppgrp { 181 fsl,pins = < 182 MX25_PAD_KPP_ROW0__KPP_ROW0 0x80000000 183 MX25_PAD_KPP_ROW1__KPP_ROW1 0x80000000 184 MX25_PAD_KPP_ROW2__KPP_ROW2 0x80000000 185 MX25_PAD_KPP_ROW3__KPP_ROW3 0x80000000 186 MX25_PAD_KPP_COL0__KPP_COL0 0x80000000 187 MX25_PAD_KPP_COL1__KPP_COL1 0x80000000 188 MX25_PAD_KPP_COL2__KPP_COL2 0x80000000 189 MX25_PAD_KPP_COL3__KPP_COL3 0x80000000 190 >; 191 }; 192 193 194 pinctrl_uart1: uart1grp { 195 fsl,pins = < 196 MX25_PAD_UART1_RTS__UART1_RTS 0xe0 197 MX25_PAD_UART1_CTS__UART1_CTS 0xe0 198 MX25_PAD_UART1_TXD__UART1_TXD 0x80000000 199 MX25_PAD_UART1_RXD__UART1_RXD 0xc0 200 >; 201 }; 202 }; 203}; 204 205&nfc { 206 nand-on-flash-bbt; 207 status = "okay"; 208}; 209 210&kpp { 211 pinctrl-names = "default"; 212 pinctrl-0 = <&pinctrl_kpp>; 213 linux,keymap = < 214 MATRIX_KEY(0x0, 0x0, KEY_UP) 215 MATRIX_KEY(0x0, 0x1, KEY_DOWN) 216 MATRIX_KEY(0x0, 0x2, KEY_VOLUMEDOWN) 217 MATRIX_KEY(0x0, 0x3, KEY_HOME) 218 MATRIX_KEY(0x1, 0x0, KEY_RIGHT) 219 MATRIX_KEY(0x1, 0x1, KEY_LEFT) 220 MATRIX_KEY(0x1, 0x2, KEY_ENTER) 221 MATRIX_KEY(0x1, 0x3, KEY_VOLUMEUP) 222 MATRIX_KEY(0x2, 0x0, KEY_F6) 223 MATRIX_KEY(0x2, 0x1, KEY_F8) 224 MATRIX_KEY(0x2, 0x2, KEY_F9) 225 MATRIX_KEY(0x2, 0x3, KEY_F10) 226 MATRIX_KEY(0x3, 0x0, KEY_F1) 227 MATRIX_KEY(0x3, 0x1, KEY_F2) 228 MATRIX_KEY(0x3, 0x2, KEY_F3) 229 MATRIX_KEY(0x3, 0x2, KEY_POWER) 230 >; 231 status = "okay"; 232}; 233 234&ssi1 { 235 codec-handle = <&codec>; 236 status = "okay"; 237}; 238 239&uart1 { 240 pinctrl-names = "default"; 241 pinctrl-0 = <&pinctrl_uart1>; 242 fsl,uart-has-rtscts; 243 status = "okay"; 244}; 245 246&usbhost1 { 247 phy_type = "serial"; 248 dr_mode = "host"; 249 status = "okay"; 250}; 251 252&usbotg { 253 phy_type = "utmi"; 254 dr_mode = "otg"; 255 external-vbus-divider; 256 status = "okay"; 257}; 258