exynos4412-trats2.dts revision 279385
1/* 2 * Samsung's Exynos4412 based Trats 2 board device tree source 3 * 4 * Copyright (c) 2013 Samsung Electronics Co., Ltd. 5 * http://www.samsung.com 6 * 7 * Device tree source file for Samsung's Trats 2 board which is based on 8 * Samsung's Exynos4412 SoC. 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License version 2 as 12 * published by the Free Software Foundation. 13*/ 14 15/dts-v1/; 16#include "exynos4412.dtsi" 17#include <dt-bindings/gpio/gpio.h> 18#include <dt-bindings/interrupt-controller/irq.h> 19 20/ { 21 model = "Samsung Trats 2 based on Exynos4412"; 22 compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4"; 23 24 aliases { 25 i2c9 = &i2c_ak8975; 26 i2c10 = &i2c_cm36651; 27 i2c11 = &i2c_max77693; 28 i2c12 = &i2c_max77693_fuel; 29 }; 30 31 memory { 32 reg = <0x40000000 0x40000000>; 33 }; 34 35 chosen { 36 bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; 37 stdout-path = &serial_2; 38 }; 39 40 firmware@0204F000 { 41 compatible = "samsung,secure-firmware"; 42 reg = <0x0204F000 0x1000>; 43 }; 44 45 fixed-rate-clocks { 46 xxti { 47 compatible = "samsung,clock-xxti", "fixed-clock"; 48 clock-frequency = <0>; 49 }; 50 51 xusbxti { 52 compatible = "samsung,clock-xusbxti", "fixed-clock"; 53 clock-frequency = <24000000>; 54 }; 55 }; 56 57 regulators { 58 compatible = "simple-bus"; 59 #address-cells = <1>; 60 #size-cells = <0>; 61 62 cam_io_reg: voltage-regulator-1 { 63 compatible = "regulator-fixed"; 64 regulator-name = "CAM_SENSOR_A"; 65 regulator-min-microvolt = <2800000>; 66 regulator-max-microvolt = <2800000>; 67 gpio = <&gpm0 2 0>; 68 enable-active-high; 69 }; 70 71 lcd_vdd3_reg: voltage-regulator-2 { 72 compatible = "regulator-fixed"; 73 regulator-name = "LCD_VDD_2.2V"; 74 regulator-min-microvolt = <2200000>; 75 regulator-max-microvolt = <2200000>; 76 gpio = <&gpc0 1 0>; 77 enable-active-high; 78 }; 79 80 cam_af_reg: voltage-regulator-3 { 81 compatible = "regulator-fixed"; 82 regulator-name = "CAM_AF"; 83 regulator-min-microvolt = <2800000>; 84 regulator-max-microvolt = <2800000>; 85 gpio = <&gpm0 4 0>; 86 enable-active-high; 87 }; 88 89 ps_als_reg: voltage-regulator-5 { 90 compatible = "regulator-fixed"; 91 regulator-name = "LED_A_3.0V"; 92 regulator-min-microvolt = <3000000>; 93 regulator-max-microvolt = <3000000>; 94 gpio = <&gpj0 5 0>; 95 enable-active-high; 96 }; 97 }; 98 99 gpio-keys { 100 compatible = "gpio-keys"; 101 102 key-down { 103 gpios = <&gpx3 3 1>; 104 linux,code = <114>; 105 label = "volume down"; 106 debounce-interval = <10>; 107 }; 108 109 key-up { 110 gpios = <&gpx2 2 1>; 111 linux,code = <115>; 112 label = "volume up"; 113 debounce-interval = <10>; 114 }; 115 116 key-power { 117 gpios = <&gpx2 7 1>; 118 linux,code = <116>; 119 label = "power"; 120 debounce-interval = <10>; 121 gpio-key,wakeup; 122 }; 123 124 key-ok { 125 gpios = <&gpx0 1 1>; 126 linux,code = <139>; 127 label = "ok"; 128 debounce-inteval = <10>; 129 gpio-key,wakeup; 130 }; 131 }; 132 133 adc: adc@126C0000 { 134 vdd-supply = <&ldo3_reg>; 135 status = "okay"; 136 }; 137 138 i2c@13890000 { 139 samsung,i2c-sda-delay = <100>; 140 samsung,i2c-slave-addr = <0x10>; 141 samsung,i2c-max-bus-freq = <400000>; 142 pinctrl-0 = <&i2c3_bus>; 143 pinctrl-names = "default"; 144 status = "okay"; 145 146 mms114-touchscreen@48 { 147 compatible = "melfas,mms114"; 148 reg = <0x48>; 149 interrupt-parent = <&gpm2>; 150 interrupts = <3 2>; 151 x-size = <720>; 152 y-size = <1280>; 153 avdd-supply = <&ldo23_reg>; 154 vdd-supply = <&ldo24_reg>; 155 }; 156 }; 157 158 i2c_0: i2c@13860000 { 159 samsung,i2c-sda-delay = <100>; 160 samsung,i2c-slave-addr = <0x10>; 161 samsung,i2c-max-bus-freq = <400000>; 162 pinctrl-0 = <&i2c0_bus>; 163 pinctrl-names = "default"; 164 status = "okay"; 165 166 s5c73m3@3c { 167 compatible = "samsung,s5c73m3"; 168 reg = <0x3c>; 169 standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */ 170 xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */ 171 vdd-int-supply = <&buck9_reg>; 172 vddio-cis-supply = <&ldo9_reg>; 173 vdda-supply = <&ldo17_reg>; 174 vddio-host-supply = <&ldo18_reg>; 175 vdd-af-supply = <&cam_af_reg>; 176 vdd-reg-supply = <&cam_io_reg>; 177 clock-frequency = <24000000>; 178 /* CAM_A_CLKOUT */ 179 clocks = <&camera 0>; 180 clock-names = "cis_extclk"; 181 port { 182 s5c73m3_ep: endpoint { 183 remote-endpoint = <&csis0_ep>; 184 data-lanes = <1 2 3 4>; 185 }; 186 }; 187 }; 188 }; 189 190 i2c@138A0000 { 191 samsung,i2c-sda-delay = <100>; 192 samsung,i2c-slave-addr = <0x10>; 193 samsung,i2c-max-bus-freq = <100000>; 194 pinctrl-0 = <&i2c4_bus>; 195 pinctrl-names = "default"; 196 status = "okay"; 197 198 wm1811: wm1811@1a { 199 compatible = "wlf,wm1811"; 200 reg = <0x1a>; 201 clocks = <&pmu_system_controller 0>; 202 clock-names = "MCLK1"; 203 DCVDD-supply = <&ldo3_reg>; 204 DBVDD1-supply = <&ldo3_reg>; 205 wlf,ldo1ena = <&gpj0 4 0>; 206 }; 207 }; 208 209 i2c@138D0000 { 210 samsung,i2c-sda-delay = <100>; 211 samsung,i2c-slave-addr = <0x10>; 212 samsung,i2c-max-bus-freq = <100000>; 213 pinctrl-0 = <&i2c7_bus>; 214 pinctrl-names = "default"; 215 status = "okay"; 216 217 max77686_pmic@09 { 218 compatible = "maxim,max77686"; 219 interrupt-parent = <&gpx0>; 220 interrupts = <7 0>; 221 reg = <0x09>; 222 #clock-cells = <1>; 223 224 voltage-regulators { 225 ldo1_reg: ldo1 { 226 regulator-compatible = "LDO1"; 227 regulator-name = "VALIVE_1.0V_AP"; 228 regulator-min-microvolt = <1000000>; 229 regulator-max-microvolt = <1000000>; 230 regulator-always-on; 231 }; 232 233 ldo2_reg: ldo2 { 234 regulator-compatible = "LDO2"; 235 regulator-name = "VM1M2_1.2V_AP"; 236 regulator-min-microvolt = <1200000>; 237 regulator-max-microvolt = <1200000>; 238 regulator-always-on; 239 regulator-state-mem { 240 regulator-on-in-suspend; 241 }; 242 }; 243 244 ldo3_reg: ldo3 { 245 regulator-compatible = "LDO3"; 246 regulator-name = "VCC_1.8V_AP"; 247 regulator-min-microvolt = <1800000>; 248 regulator-max-microvolt = <1800000>; 249 regulator-always-on; 250 }; 251 252 ldo4_reg: ldo4 { 253 regulator-compatible = "LDO4"; 254 regulator-name = "VCC_2.8V_AP"; 255 regulator-min-microvolt = <2800000>; 256 regulator-max-microvolt = <2800000>; 257 regulator-always-on; 258 }; 259 260 ldo5_reg: ldo5 { 261 regulator-compatible = "LDO5"; 262 regulator-name = "VCC_1.8V_IO"; 263 regulator-min-microvolt = <1800000>; 264 regulator-max-microvolt = <1800000>; 265 regulator-always-on; 266 }; 267 268 ldo6_reg: ldo6 { 269 regulator-compatible = "LDO6"; 270 regulator-name = "VMPLL_1.0V_AP"; 271 regulator-min-microvolt = <1000000>; 272 regulator-max-microvolt = <1000000>; 273 regulator-always-on; 274 regulator-state-mem { 275 regulator-on-in-suspend; 276 }; 277 }; 278 279 ldo7_reg: ldo7 { 280 regulator-compatible = "LDO7"; 281 regulator-name = "VPLL_1.0V_AP"; 282 regulator-min-microvolt = <1000000>; 283 regulator-max-microvolt = <1000000>; 284 regulator-always-on; 285 regulator-state-mem { 286 regulator-on-in-suspend; 287 }; 288 }; 289 290 ldo8_reg: ldo8 { 291 regulator-compatible = "LDO8"; 292 regulator-name = "VMIPI_1.0V"; 293 regulator-min-microvolt = <1000000>; 294 regulator-max-microvolt = <1000000>; 295 regulator-state-mem { 296 regulator-off-in-suspend; 297 }; 298 }; 299 300 ldo9_reg: ldo9 { 301 regulator-compatible = "LDO9"; 302 regulator-name = "CAM_ISP_MIPI_1.2V"; 303 regulator-min-microvolt = <1200000>; 304 regulator-max-microvolt = <1200000>; 305 }; 306 307 ldo10_reg: ldo10 { 308 regulator-compatible = "LDO10"; 309 regulator-name = "VMIPI_1.8V"; 310 regulator-min-microvolt = <1800000>; 311 regulator-max-microvolt = <1800000>; 312 regulator-state-mem { 313 regulator-off-in-suspend; 314 }; 315 }; 316 317 ldo11_reg: ldo11 { 318 regulator-compatible = "LDO11"; 319 regulator-name = "VABB1_1.95V"; 320 regulator-min-microvolt = <1950000>; 321 regulator-max-microvolt = <1950000>; 322 regulator-always-on; 323 regulator-state-mem { 324 regulator-off-in-suspend; 325 }; 326 }; 327 328 ldo12_reg: ldo12 { 329 regulator-compatible = "LDO12"; 330 regulator-name = "VUOTG_3.0V"; 331 regulator-min-microvolt = <3000000>; 332 regulator-max-microvolt = <3000000>; 333 regulator-state-mem { 334 regulator-off-in-suspend; 335 }; 336 }; 337 338 ldo13_reg: ldo13 { 339 regulator-compatible = "LDO13"; 340 regulator-name = "NFC_AVDD_1.8V"; 341 regulator-min-microvolt = <1800000>; 342 regulator-max-microvolt = <1800000>; 343 }; 344 345 ldo14_reg: ldo14 { 346 regulator-compatible = "LDO14"; 347 regulator-name = "VABB2_1.95V"; 348 regulator-min-microvolt = <1950000>; 349 regulator-max-microvolt = <1950000>; 350 regulator-always-on; 351 regulator-state-mem { 352 regulator-off-in-suspend; 353 }; 354 }; 355 356 ldo15_reg: ldo15 { 357 regulator-compatible = "LDO15"; 358 regulator-name = "VHSIC_1.0V"; 359 regulator-min-microvolt = <1000000>; 360 regulator-max-microvolt = <1000000>; 361 regulator-state-mem { 362 regulator-on-in-suspend; 363 }; 364 }; 365 366 ldo16_reg: ldo16 { 367 regulator-compatible = "LDO16"; 368 regulator-name = "VHSIC_1.8V"; 369 regulator-min-microvolt = <1800000>; 370 regulator-max-microvolt = <1800000>; 371 regulator-state-mem { 372 regulator-on-in-suspend; 373 }; 374 }; 375 376 ldo17_reg: ldo17 { 377 regulator-compatible = "LDO17"; 378 regulator-name = "CAM_SENSOR_CORE_1.2V"; 379 regulator-min-microvolt = <1200000>; 380 regulator-max-microvolt = <1200000>; 381 }; 382 383 ldo18_reg: ldo18 { 384 regulator-compatible = "LDO18"; 385 regulator-name = "CAM_ISP_SEN_IO_1.8V"; 386 regulator-min-microvolt = <1800000>; 387 regulator-max-microvolt = <1800000>; 388 }; 389 390 ldo19_reg: ldo19 { 391 regulator-compatible = "LDO19"; 392 regulator-name = "VT_CAM_1.8V"; 393 regulator-min-microvolt = <1800000>; 394 regulator-max-microvolt = <1800000>; 395 }; 396 397 ldo20_reg: ldo20 { 398 regulator-compatible = "LDO20"; 399 regulator-name = "VDDQ_PRE_1.8V"; 400 regulator-min-microvolt = <1800000>; 401 regulator-max-microvolt = <1800000>; 402 }; 403 404 ldo21_reg: ldo21 { 405 regulator-compatible = "LDO21"; 406 regulator-name = "VTF_2.8V"; 407 regulator-min-microvolt = <2800000>; 408 regulator-max-microvolt = <2800000>; 409 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; 410 }; 411 412 ldo22_reg: ldo22 { 413 regulator-compatible = "LDO22"; 414 regulator-name = "VMEM_VDD_2.8V"; 415 regulator-min-microvolt = <2800000>; 416 regulator-max-microvolt = <2800000>; 417 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; 418 }; 419 420 ldo23_reg: ldo23 { 421 regulator-compatible = "LDO23"; 422 regulator-name = "TSP_AVDD_3.3V"; 423 regulator-min-microvolt = <3300000>; 424 regulator-max-microvolt = <3300000>; 425 }; 426 427 ldo24_reg: ldo24 { 428 regulator-compatible = "LDO24"; 429 regulator-name = "TSP_VDD_1.8V"; 430 regulator-min-microvolt = <1800000>; 431 regulator-max-microvolt = <1800000>; 432 }; 433 434 ldo25_reg: ldo25 { 435 regulator-compatible = "LDO25"; 436 regulator-name = "LCD_VCC_3.3V"; 437 regulator-min-microvolt = <2800000>; 438 regulator-max-microvolt = <2800000>; 439 }; 440 441 ldo26_reg: ldo26 { 442 regulator-compatible = "LDO26"; 443 regulator-name = "MOTOR_VCC_3.0V"; 444 regulator-min-microvolt = <3000000>; 445 regulator-max-microvolt = <3000000>; 446 }; 447 448 buck1_reg: buck1 { 449 regulator-compatible = "BUCK1"; 450 regulator-name = "vdd_mif"; 451 regulator-min-microvolt = <850000>; 452 regulator-max-microvolt = <1100000>; 453 regulator-always-on; 454 regulator-boot-on; 455 regulator-state-mem { 456 regulator-off-in-suspend; 457 }; 458 }; 459 460 buck2_reg: buck2 { 461 regulator-compatible = "BUCK2"; 462 regulator-name = "vdd_arm"; 463 regulator-min-microvolt = <850000>; 464 regulator-max-microvolt = <1500000>; 465 regulator-always-on; 466 regulator-boot-on; 467 regulator-state-mem { 468 regulator-on-in-suspend; 469 }; 470 }; 471 472 buck3_reg: buck3 { 473 regulator-compatible = "BUCK3"; 474 regulator-name = "vdd_int"; 475 regulator-min-microvolt = <850000>; 476 regulator-max-microvolt = <1150000>; 477 regulator-always-on; 478 regulator-boot-on; 479 regulator-state-mem { 480 regulator-off-in-suspend; 481 }; 482 }; 483 484 buck4_reg: buck4 { 485 regulator-compatible = "BUCK4"; 486 regulator-name = "vdd_g3d"; 487 regulator-min-microvolt = <850000>; 488 regulator-max-microvolt = <1150000>; 489 regulator-boot-on; 490 regulator-state-mem { 491 regulator-off-in-suspend; 492 }; 493 }; 494 495 buck5_reg: buck5 { 496 regulator-compatible = "BUCK5"; 497 regulator-name = "VMEM_1.2V_AP"; 498 regulator-min-microvolt = <1200000>; 499 regulator-max-microvolt = <1200000>; 500 regulator-always-on; 501 }; 502 503 buck6_reg: buck6 { 504 regulator-compatible = "BUCK6"; 505 regulator-name = "VCC_SUB_1.35V"; 506 regulator-min-microvolt = <1350000>; 507 regulator-max-microvolt = <1350000>; 508 regulator-always-on; 509 }; 510 511 buck7_reg: buck7 { 512 regulator-compatible = "BUCK7"; 513 regulator-name = "VCC_SUB_2.0V"; 514 regulator-min-microvolt = <2000000>; 515 regulator-max-microvolt = <2000000>; 516 regulator-always-on; 517 }; 518 519 buck8_reg: buck8 { 520 regulator-compatible = "BUCK8"; 521 regulator-name = "VMEM_VDDF_3.0V"; 522 regulator-min-microvolt = <2850000>; 523 regulator-max-microvolt = <2850000>; 524 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; 525 }; 526 527 buck9_reg: buck9 { 528 regulator-compatible = "BUCK9"; 529 regulator-name = "CAM_ISP_CORE_1.2V"; 530 regulator-min-microvolt = <1000000>; 531 regulator-max-microvolt = <1200000>; 532 maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; 533 }; 534 }; 535 }; 536 }; 537 538 i2c_max77693: i2c-gpio-1 { 539 compatible = "i2c-gpio"; 540 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>; 541 i2c-gpio,delay-us = <2>; 542 #address-cells = <1>; 543 #size-cells = <0>; 544 status = "okay"; 545 546 max77693@66 { 547 compatible = "maxim,max77693"; 548 interrupt-parent = <&gpx1>; 549 interrupts = <5 2>; 550 reg = <0x66>; 551 552 regulators { 553 esafeout1_reg: ESAFEOUT1@1 { 554 regulator-name = "ESAFEOUT1"; 555 }; 556 esafeout2_reg: ESAFEOUT2@2 { 557 regulator-name = "ESAFEOUT2"; 558 }; 559 charger_reg: CHARGER@0 { 560 regulator-name = "CHARGER"; 561 regulator-min-microamp = <60000>; 562 regulator-max-microamp = <2580000>; 563 }; 564 }; 565 566 max77693_haptic { 567 compatible = "maxim,max77693-haptic"; 568 haptic-supply = <&ldo26_reg>; 569 pwms = <&pwm 0 38022 0>; 570 }; 571 572 charger { 573 compatible = "maxim,max77693-charger"; 574 575 maxim,constant-microvolt = <4350000>; 576 maxim,min-system-microvolt = <3600000>; 577 maxim,thermal-regulation-celsius = <100>; 578 maxim,battery-overcurrent-microamp = <3500000>; 579 maxim,charge-input-threshold-microvolt = <4300000>; 580 }; 581 }; 582 }; 583 584 i2c_max77693_fuel: i2c-gpio-3 { 585 compatible = "i2c-gpio"; 586 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>; 587 i2c-gpio,delay-us = <2>; 588 #address-cells = <1>; 589 #size-cells = <0>; 590 status = "okay"; 591 592 max77693-fuel-gauge@36 { 593 compatible = "maxim,max17047"; 594 interrupt-parent = <&gpx2>; 595 interrupts = <3 IRQ_TYPE_EDGE_FALLING>; 596 reg = <0x36>; 597 }; 598 }; 599 600 mmc@12550000 { 601 num-slots = <1>; 602 broken-cd; 603 non-removable; 604 card-detect-delay = <200>; 605 vmmc-supply = <&ldo22_reg>; 606 clock-frequency = <400000000>; 607 samsung,dw-mshc-ciu-div = <0>; 608 samsung,dw-mshc-sdr-timing = <2 3>; 609 samsung,dw-mshc-ddr-timing = <1 2>; 610 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; 611 pinctrl-names = "default"; 612 status = "okay"; 613 bus-width = <8>; 614 cap-mmc-highspeed; 615 }; 616 617 sdhci@12530000 { 618 bus-width = <4>; 619 cd-gpios = <&gpx3 4 0>; 620 cd-inverted; 621 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; 622 pinctrl-names = "default"; 623 vmmc-supply = <&ldo21_reg>; 624 status = "okay"; 625 }; 626 627 serial@13800000 { 628 status = "okay"; 629 }; 630 631 serial@13810000 { 632 status = "okay"; 633 }; 634 635 serial@13820000 { 636 status = "okay"; 637 }; 638 639 serial@13830000 { 640 status = "okay"; 641 }; 642 643 tmu@100C0000 { 644 vtmu-supply = <&ldo10_reg>; 645 status = "okay"; 646 }; 647 648 i2c_ak8975: i2c-gpio-0 { 649 compatible = "i2c-gpio"; 650 gpios = <&gpy2 4 0>, <&gpy2 5 0>; 651 i2c-gpio,delay-us = <2>; 652 #address-cells = <1>; 653 #size-cells = <0>; 654 status = "okay"; 655 656 ak8975@0c { 657 compatible = "asahi-kasei,ak8975"; 658 reg = <0x0c>; 659 gpios = <&gpj0 7 0>; 660 }; 661 }; 662 663 i2c_cm36651: i2c-gpio-2 { 664 compatible = "i2c-gpio"; 665 gpios = <&gpf0 0 1>, <&gpf0 1 1>; 666 i2c-gpio,delay-us = <2>; 667 #address-cells = <1>; 668 #size-cells = <0>; 669 670 cm36651@18 { 671 compatible = "capella,cm36651"; 672 reg = <0x18>; 673 interrupt-parent = <&gpx0>; 674 interrupts = <2 2>; 675 vled-supply = <&ps_als_reg>; 676 }; 677 }; 678 679 spi_1: spi@13930000 { 680 pinctrl-names = "default"; 681 pinctrl-0 = <&spi1_bus>; 682 cs-gpios = <&gpb 5 0>; 683 status = "okay"; 684 685 s5c73m3_spi: s5c73m3 { 686 compatible = "samsung,s5c73m3"; 687 spi-max-frequency = <50000000>; 688 reg = <0>; 689 controller-data { 690 samsung,spi-feedback-delay = <2>; 691 }; 692 }; 693 }; 694 695 pwm: pwm@139D0000 { 696 pinctrl-0 = <&pwm0_out>; 697 pinctrl-names = "default"; 698 samsung,pwm-outputs = <0>; 699 status = "okay"; 700 }; 701 702 dsi_0: dsi@11C80000 { 703 vddcore-supply = <&ldo8_reg>; 704 vddio-supply = <&ldo10_reg>; 705 samsung,pll-clock-frequency = <24000000>; 706 status = "okay"; 707 708 ports { 709 #address-cells = <1>; 710 #size-cells = <0>; 711 712 port@1 { 713 reg = <1>; 714 715 dsi_out: endpoint { 716 remote-endpoint = <&dsi_in>; 717 samsung,burst-clock-frequency = <500000000>; 718 samsung,esc-clock-frequency = <20000000>; 719 }; 720 }; 721 }; 722 723 panel@0 { 724 compatible = "samsung,s6e8aa0"; 725 reg = <0>; 726 vdd3-supply = <&lcd_vdd3_reg>; 727 vci-supply = <&ldo25_reg>; 728 reset-gpios = <&gpy4 5 0>; 729 power-on-delay= <50>; 730 reset-delay = <100>; 731 init-delay = <100>; 732 flip-horizontal; 733 flip-vertical; 734 panel-width-mm = <58>; 735 panel-height-mm = <103>; 736 737 display-timings { 738 timing-0 { 739 clock-frequency = <0>; 740 hactive = <720>; 741 vactive = <1280>; 742 hfront-porch = <5>; 743 hback-porch = <5>; 744 hsync-len = <5>; 745 vfront-porch = <13>; 746 vback-porch = <1>; 747 vsync-len = <2>; 748 }; 749 }; 750 751 port { 752 dsi_in: endpoint { 753 remote-endpoint = <&dsi_out>; 754 }; 755 }; 756 }; 757 }; 758 759 fimd@11c00000 { 760 status = "okay"; 761 }; 762 763 camera: camera { 764 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; 765 pinctrl-names = "default"; 766 status = "okay"; 767 assigned-clocks = <&clock CLK_MOUT_CAM0>, 768 <&clock CLK_MOUT_CAM1>; 769 assigned-clock-parents = <&clock CLK_XUSBXTI>, 770 <&clock CLK_XUSBXTI>; 771 772 fimc_0: fimc@11800000 { 773 status = "okay"; 774 assigned-clocks = <&clock CLK_MOUT_FIMC0>, 775 <&clock CLK_SCLK_FIMC0>; 776 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; 777 assigned-clock-rates = <0>, <176000000>; 778 }; 779 780 fimc_1: fimc@11810000 { 781 status = "okay"; 782 assigned-clocks = <&clock CLK_MOUT_FIMC1>, 783 <&clock CLK_SCLK_FIMC1>; 784 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; 785 assigned-clock-rates = <0>, <176000000>; 786 }; 787 788 fimc_2: fimc@11820000 { 789 status = "okay"; 790 assigned-clocks = <&clock CLK_MOUT_FIMC2>, 791 <&clock CLK_SCLK_FIMC2>; 792 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; 793 assigned-clock-rates = <0>, <176000000>; 794 }; 795 796 fimc_3: fimc@11830000 { 797 status = "okay"; 798 assigned-clocks = <&clock CLK_MOUT_FIMC3>, 799 <&clock CLK_SCLK_FIMC3>; 800 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; 801 assigned-clock-rates = <0>, <176000000>; 802 }; 803 804 csis_0: csis@11880000 { 805 status = "okay"; 806 vddcore-supply = <&ldo8_reg>; 807 vddio-supply = <&ldo10_reg>; 808 assigned-clocks = <&clock CLK_MOUT_CSIS0>, 809 <&clock CLK_SCLK_CSIS0>; 810 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; 811 assigned-clock-rates = <0>, <176000000>; 812 813 /* Camera C (3) MIPI CSI-2 (CSIS0) */ 814 port@3 { 815 reg = <3>; 816 csis0_ep: endpoint { 817 remote-endpoint = <&s5c73m3_ep>; 818 data-lanes = <1 2 3 4>; 819 samsung,csis-hs-settle = <12>; 820 }; 821 }; 822 }; 823 824 csis_1: csis@11890000 { 825 status = "okay"; 826 vddcore-supply = <&ldo8_reg>; 827 vddio-supply = <&ldo10_reg>; 828 assigned-clocks = <&clock CLK_MOUT_CSIS1>, 829 <&clock CLK_SCLK_CSIS1>; 830 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; 831 assigned-clock-rates = <0>, <176000000>; 832 833 /* Camera D (4) MIPI CSI-2 (CSIS1) */ 834 port@4 { 835 reg = <4>; 836 csis1_ep: endpoint { 837 remote-endpoint = <&is_s5k6a3_ep>; 838 data-lanes = <1>; 839 samsung,csis-hs-settle = <18>; 840 samsung,csis-wclk; 841 }; 842 }; 843 }; 844 845 fimc_lite_0: fimc-lite@12390000 { 846 status = "okay"; 847 }; 848 849 fimc_lite_1: fimc-lite@123A0000 { 850 status = "okay"; 851 }; 852 853 fimc-is@12000000 { 854 pinctrl-0 = <&fimc_is_uart>; 855 pinctrl-names = "default"; 856 status = "okay"; 857 858 i2c1_isp: i2c-isp@12140000 { 859 pinctrl-0 = <&fimc_is_i2c1>; 860 pinctrl-names = "default"; 861 862 s5k6a3@10 { 863 compatible = "samsung,s5k6a3"; 864 reg = <0x10>; 865 svdda-supply = <&cam_io_reg>; 866 svddio-supply = <&ldo19_reg>; 867 afvdd-supply = <&ldo19_reg>; 868 clock-frequency = <24000000>; 869 /* CAM_B_CLKOUT */ 870 clocks = <&camera 1>; 871 clock-names = "extclk"; 872 samsung,camclk-out = <1>; 873 gpios = <&gpm1 6 0>; 874 875 port { 876 is_s5k6a3_ep: endpoint { 877 remote-endpoint = <&csis1_ep>; 878 data-lanes = <1>; 879 }; 880 }; 881 }; 882 }; 883 }; 884 }; 885 886 i2s0: i2s@03830000 { 887 pinctrl-0 = <&i2s0_bus>; 888 pinctrl-names = "default"; 889 status = "okay"; 890 }; 891 892 sound { 893 compatible = "samsung,trats2-audio"; 894 samsung,i2s-controller = <&i2s0>; 895 samsung,model = "Trats2"; 896 samsung,audio-codec = <&wm1811>; 897 samsung,audio-routing = 898 "SPK", "SPKOUTLN", 899 "SPK", "SPKOUTLP", 900 "SPK", "SPKOUTRN", 901 "SPK", "SPKOUTRP"; 902 }; 903 904 exynos-usbphy@125B0000 { 905 status = "okay"; 906 }; 907 908 hsotg@12480000 { 909 vusb_d-supply = <&ldo15_reg>; 910 vusb_a-supply = <&ldo12_reg>; 911 dr_mode = "peripheral"; 912 status = "okay"; 913 }; 914 915 thermistor-ap@0 { 916 compatible = "ntc,ncp15wb473"; 917 pullup-uv = <1800000>; /* VCC_1.8V_AP */ 918 pullup-ohm = <100000>; /* 100K */ 919 pulldown-ohm = <100000>; /* 100K */ 920 io-channels = <&adc 1>; /* AP temperature */ 921 }; 922 923 thermistor-battery@1 { 924 compatible = "ntc,ncp15wb473"; 925 pullup-uv = <1800000>; /* VCC_1.8V_AP */ 926 pullup-ohm = <100000>; /* 100K */ 927 pulldown-ohm = <100000>; /* 100K */ 928 io-channels = <&adc 2>; /* Battery temperature */ 929 }; 930}; 931 932&pmu_system_controller { 933 assigned-clocks = <&pmu_system_controller 0>; 934 assigned-clock-parents = <&clock CLK_XUSBXTI>; 935}; 936 937&ppmu_dmc0 { 938 status = "okay"; 939 940 events { 941 ppmu_dmc0_3: ppmu-event3-dmc0 { 942 event-name = "ppmu-event3-dmc0"; 943 }; 944 }; 945}; 946 947&ppmu_dmc1 { 948 status = "okay"; 949 950 events { 951 ppmu_dmc1_3: ppmu-event3-dmc1 { 952 event-name = "ppmu-event3-dmc1"; 953 }; 954 }; 955}; 956 957&ppmu_leftbus { 958 status = "okay"; 959 960 events { 961 ppmu_leftbus_3: ppmu-event3-leftbus { 962 event-name = "ppmu-event3-leftbus"; 963 }; 964 }; 965}; 966 967&ppmu_rightbus { 968 status = "okay"; 969 970 events { 971 ppmu_rightbus_3: ppmu-event3-rightbus { 972 event-name = "ppmu-event3-rightbus"; 973 }; 974 }; 975}; 976 977&pinctrl_0 { 978 pinctrl-names = "default"; 979 pinctrl-0 = <&sleep0>; 980 981 sleep0: sleep-states { 982 PIN_SLP(gpa0-0, INPUT, NONE); 983 PIN_SLP(gpa0-1, OUT0, NONE); 984 PIN_SLP(gpa0-2, INPUT, NONE); 985 PIN_SLP(gpa0-3, INPUT, UP); 986 PIN_SLP(gpa0-4, INPUT, NONE); 987 PIN_SLP(gpa0-5, INPUT, DOWN); 988 PIN_SLP(gpa0-6, INPUT, DOWN); 989 PIN_SLP(gpa0-7, INPUT, UP); 990 991 PIN_SLP(gpa1-0, INPUT, DOWN); 992 PIN_SLP(gpa1-1, INPUT, DOWN); 993 PIN_SLP(gpa1-2, INPUT, DOWN); 994 PIN_SLP(gpa1-3, INPUT, DOWN); 995 PIN_SLP(gpa1-4, INPUT, DOWN); 996 PIN_SLP(gpa1-5, INPUT, DOWN); 997 998 PIN_SLP(gpb-0, INPUT, NONE); 999 PIN_SLP(gpb-1, INPUT, NONE); 1000 PIN_SLP(gpb-2, INPUT, NONE); 1001 PIN_SLP(gpb-3, INPUT, NONE); 1002 PIN_SLP(gpb-4, INPUT, DOWN); 1003 PIN_SLP(gpb-5, INPUT, UP); 1004 PIN_SLP(gpb-6, INPUT, DOWN); 1005 PIN_SLP(gpb-7, INPUT, DOWN); 1006 1007 PIN_SLP(gpc0-0, INPUT, DOWN); 1008 PIN_SLP(gpc0-1, INPUT, DOWN); 1009 PIN_SLP(gpc0-2, INPUT, DOWN); 1010 PIN_SLP(gpc0-3, INPUT, DOWN); 1011 PIN_SLP(gpc0-4, INPUT, DOWN); 1012 1013 PIN_SLP(gpc1-0, INPUT, NONE); 1014 PIN_SLP(gpc1-1, PREV, NONE); 1015 PIN_SLP(gpc1-2, INPUT, NONE); 1016 PIN_SLP(gpc1-3, INPUT, NONE); 1017 PIN_SLP(gpc1-4, INPUT, NONE); 1018 1019 PIN_SLP(gpd0-0, INPUT, DOWN); 1020 PIN_SLP(gpd0-1, INPUT, DOWN); 1021 PIN_SLP(gpd0-2, INPUT, NONE); 1022 PIN_SLP(gpd0-3, INPUT, NONE); 1023 1024 PIN_SLP(gpd1-0, INPUT, DOWN); 1025 PIN_SLP(gpd1-1, INPUT, DOWN); 1026 PIN_SLP(gpd1-2, INPUT, NONE); 1027 PIN_SLP(gpd1-3, INPUT, NONE); 1028 1029 PIN_SLP(gpf0-0, INPUT, NONE); 1030 PIN_SLP(gpf0-1, INPUT, NONE); 1031 PIN_SLP(gpf0-2, INPUT, DOWN); 1032 PIN_SLP(gpf0-3, INPUT, DOWN); 1033 PIN_SLP(gpf0-4, INPUT, NONE); 1034 PIN_SLP(gpf0-5, INPUT, DOWN); 1035 PIN_SLP(gpf0-6, INPUT, NONE); 1036 PIN_SLP(gpf0-7, INPUT, DOWN); 1037 1038 PIN_SLP(gpf1-0, INPUT, DOWN); 1039 PIN_SLP(gpf1-1, INPUT, DOWN); 1040 PIN_SLP(gpf1-2, INPUT, DOWN); 1041 PIN_SLP(gpf1-3, INPUT, DOWN); 1042 PIN_SLP(gpf1-4, INPUT, NONE); 1043 PIN_SLP(gpf1-5, INPUT, NONE); 1044 PIN_SLP(gpf1-6, INPUT, DOWN); 1045 PIN_SLP(gpf1-7, PREV, NONE); 1046 1047 PIN_SLP(gpf2-0, PREV, NONE); 1048 PIN_SLP(gpf2-1, INPUT, DOWN); 1049 PIN_SLP(gpf2-2, INPUT, DOWN); 1050 PIN_SLP(gpf2-3, INPUT, DOWN); 1051 PIN_SLP(gpf2-4, INPUT, DOWN); 1052 PIN_SLP(gpf2-5, INPUT, DOWN); 1053 PIN_SLP(gpf2-6, INPUT, NONE); 1054 PIN_SLP(gpf2-7, INPUT, NONE); 1055 1056 PIN_SLP(gpf3-0, INPUT, NONE); 1057 PIN_SLP(gpf3-1, PREV, NONE); 1058 PIN_SLP(gpf3-2, PREV, NONE); 1059 PIN_SLP(gpf3-3, PREV, NONE); 1060 PIN_SLP(gpf3-4, OUT1, NONE); 1061 PIN_SLP(gpf3-5, INPUT, DOWN); 1062 1063 PIN_SLP(gpj0-0, PREV, NONE); 1064 PIN_SLP(gpj0-1, PREV, NONE); 1065 PIN_SLP(gpj0-2, PREV, NONE); 1066 PIN_SLP(gpj0-3, INPUT, DOWN); 1067 PIN_SLP(gpj0-4, PREV, NONE); 1068 PIN_SLP(gpj0-5, PREV, NONE); 1069 PIN_SLP(gpj0-6, INPUT, DOWN); 1070 PIN_SLP(gpj0-7, INPUT, DOWN); 1071 1072 PIN_SLP(gpj1-0, INPUT, DOWN); 1073 PIN_SLP(gpj1-1, PREV, NONE); 1074 PIN_SLP(gpj1-2, PREV, NONE); 1075 PIN_SLP(gpj1-3, INPUT, DOWN); 1076 PIN_SLP(gpj1-4, INPUT, DOWN); 1077 }; 1078}; 1079 1080&pinctrl_1 { 1081 pinctrl-names = "default"; 1082 pinctrl-0 = <&sleep1>; 1083 1084 sleep1: sleep-states { 1085 PIN_SLP(gpk0-0, PREV, NONE); 1086 PIN_SLP(gpk0-1, PREV, NONE); 1087 PIN_SLP(gpk0-2, OUT0, NONE); 1088 PIN_SLP(gpk0-3, PREV, NONE); 1089 PIN_SLP(gpk0-4, PREV, NONE); 1090 PIN_SLP(gpk0-5, PREV, NONE); 1091 PIN_SLP(gpk0-6, PREV, NONE); 1092 1093 PIN_SLP(gpk1-0, INPUT, DOWN); 1094 PIN_SLP(gpk1-1, INPUT, DOWN); 1095 PIN_SLP(gpk1-2, INPUT, DOWN); 1096 PIN_SLP(gpk1-3, PREV, NONE); 1097 PIN_SLP(gpk1-4, PREV, NONE); 1098 PIN_SLP(gpk1-5, PREV, NONE); 1099 PIN_SLP(gpk1-6, PREV, NONE); 1100 1101 PIN_SLP(gpk2-0, INPUT, DOWN); 1102 PIN_SLP(gpk2-1, INPUT, DOWN); 1103 PIN_SLP(gpk2-2, INPUT, DOWN); 1104 PIN_SLP(gpk2-3, INPUT, DOWN); 1105 PIN_SLP(gpk2-4, INPUT, DOWN); 1106 PIN_SLP(gpk2-5, INPUT, DOWN); 1107 PIN_SLP(gpk2-6, INPUT, DOWN); 1108 1109 PIN_SLP(gpk3-0, OUT0, NONE); 1110 PIN_SLP(gpk3-1, INPUT, NONE); 1111 PIN_SLP(gpk3-2, INPUT, DOWN); 1112 PIN_SLP(gpk3-3, INPUT, NONE); 1113 PIN_SLP(gpk3-4, INPUT, NONE); 1114 PIN_SLP(gpk3-5, INPUT, NONE); 1115 PIN_SLP(gpk3-6, INPUT, NONE); 1116 1117 PIN_SLP(gpl0-0, INPUT, DOWN); 1118 PIN_SLP(gpl0-1, INPUT, DOWN); 1119 PIN_SLP(gpl0-2, INPUT, DOWN); 1120 PIN_SLP(gpl0-3, INPUT, DOWN); 1121 PIN_SLP(gpl0-4, PREV, NONE); 1122 PIN_SLP(gpl0-6, PREV, NONE); 1123 1124 PIN_SLP(gpl1-0, INPUT, DOWN); 1125 PIN_SLP(gpl1-1, INPUT, DOWN); 1126 PIN_SLP(gpl2-0, INPUT, DOWN); 1127 PIN_SLP(gpl2-1, INPUT, DOWN); 1128 PIN_SLP(gpl2-2, INPUT, DOWN); 1129 PIN_SLP(gpl2-3, INPUT, DOWN); 1130 PIN_SLP(gpl2-4, INPUT, DOWN); 1131 PIN_SLP(gpl2-5, INPUT, DOWN); 1132 PIN_SLP(gpl2-6, PREV, NONE); 1133 PIN_SLP(gpl2-7, INPUT, DOWN); 1134 1135 PIN_SLP(gpm0-0, INPUT, DOWN); 1136 PIN_SLP(gpm0-1, INPUT, DOWN); 1137 PIN_SLP(gpm0-2, INPUT, DOWN); 1138 PIN_SLP(gpm0-3, INPUT, DOWN); 1139 PIN_SLP(gpm0-4, INPUT, DOWN); 1140 PIN_SLP(gpm0-5, INPUT, DOWN); 1141 PIN_SLP(gpm0-6, INPUT, DOWN); 1142 PIN_SLP(gpm0-7, INPUT, DOWN); 1143 1144 PIN_SLP(gpm1-0, INPUT, DOWN); 1145 PIN_SLP(gpm1-1, INPUT, DOWN); 1146 PIN_SLP(gpm1-2, INPUT, NONE); 1147 PIN_SLP(gpm1-3, INPUT, NONE); 1148 PIN_SLP(gpm1-4, INPUT, NONE); 1149 PIN_SLP(gpm1-5, INPUT, NONE); 1150 PIN_SLP(gpm1-6, INPUT, DOWN); 1151 1152 PIN_SLP(gpm2-0, INPUT, NONE); 1153 PIN_SLP(gpm2-1, INPUT, NONE); 1154 PIN_SLP(gpm2-2, INPUT, DOWN); 1155 PIN_SLP(gpm2-3, INPUT, DOWN); 1156 PIN_SLP(gpm2-4, INPUT, DOWN); 1157 1158 PIN_SLP(gpm3-0, PREV, NONE); 1159 PIN_SLP(gpm3-1, PREV, NONE); 1160 PIN_SLP(gpm3-2, PREV, NONE); 1161 PIN_SLP(gpm3-3, OUT1, NONE); 1162 PIN_SLP(gpm3-4, INPUT, DOWN); 1163 PIN_SLP(gpm3-5, INPUT, DOWN); 1164 PIN_SLP(gpm3-6, INPUT, DOWN); 1165 PIN_SLP(gpm3-7, INPUT, DOWN); 1166 1167 PIN_SLP(gpm4-0, INPUT, DOWN); 1168 PIN_SLP(gpm4-1, INPUT, DOWN); 1169 PIN_SLP(gpm4-2, INPUT, DOWN); 1170 PIN_SLP(gpm4-3, INPUT, DOWN); 1171 PIN_SLP(gpm4-4, INPUT, DOWN); 1172 PIN_SLP(gpm4-5, INPUT, DOWN); 1173 PIN_SLP(gpm4-6, INPUT, DOWN); 1174 PIN_SLP(gpm4-7, INPUT, DOWN); 1175 1176 PIN_SLP(gpy0-0, INPUT, DOWN); 1177 PIN_SLP(gpy0-1, INPUT, DOWN); 1178 PIN_SLP(gpy0-2, INPUT, DOWN); 1179 PIN_SLP(gpy0-3, INPUT, DOWN); 1180 PIN_SLP(gpy0-4, INPUT, DOWN); 1181 PIN_SLP(gpy0-5, INPUT, DOWN); 1182 1183 PIN_SLP(gpy1-0, INPUT, DOWN); 1184 PIN_SLP(gpy1-1, INPUT, DOWN); 1185 PIN_SLP(gpy1-2, INPUT, DOWN); 1186 PIN_SLP(gpy1-3, INPUT, DOWN); 1187 1188 PIN_SLP(gpy2-0, PREV, NONE); 1189 PIN_SLP(gpy2-1, INPUT, DOWN); 1190 PIN_SLP(gpy2-2, INPUT, NONE); 1191 PIN_SLP(gpy2-3, INPUT, NONE); 1192 PIN_SLP(gpy2-4, INPUT, NONE); 1193 PIN_SLP(gpy2-5, INPUT, NONE); 1194 1195 PIN_SLP(gpy3-0, INPUT, DOWN); 1196 PIN_SLP(gpy3-1, INPUT, DOWN); 1197 PIN_SLP(gpy3-2, INPUT, DOWN); 1198 PIN_SLP(gpy3-3, INPUT, DOWN); 1199 PIN_SLP(gpy3-4, INPUT, DOWN); 1200 PIN_SLP(gpy3-5, INPUT, DOWN); 1201 PIN_SLP(gpy3-6, INPUT, DOWN); 1202 PIN_SLP(gpy3-7, INPUT, DOWN); 1203 1204 PIN_SLP(gpy4-0, INPUT, DOWN); 1205 PIN_SLP(gpy4-1, INPUT, DOWN); 1206 PIN_SLP(gpy4-2, INPUT, DOWN); 1207 PIN_SLP(gpy4-3, INPUT, DOWN); 1208 PIN_SLP(gpy4-4, INPUT, DOWN); 1209 PIN_SLP(gpy4-5, INPUT, DOWN); 1210 PIN_SLP(gpy4-6, INPUT, DOWN); 1211 PIN_SLP(gpy4-7, INPUT, DOWN); 1212 1213 PIN_SLP(gpy5-0, INPUT, DOWN); 1214 PIN_SLP(gpy5-1, INPUT, DOWN); 1215 PIN_SLP(gpy5-2, INPUT, DOWN); 1216 PIN_SLP(gpy5-3, INPUT, DOWN); 1217 PIN_SLP(gpy5-4, INPUT, DOWN); 1218 PIN_SLP(gpy5-5, INPUT, DOWN); 1219 PIN_SLP(gpy5-6, INPUT, DOWN); 1220 PIN_SLP(gpy5-7, INPUT, DOWN); 1221 1222 PIN_SLP(gpy6-0, INPUT, DOWN); 1223 PIN_SLP(gpy6-1, INPUT, DOWN); 1224 PIN_SLP(gpy6-2, INPUT, DOWN); 1225 PIN_SLP(gpy6-3, INPUT, DOWN); 1226 PIN_SLP(gpy6-4, INPUT, DOWN); 1227 PIN_SLP(gpy6-5, INPUT, DOWN); 1228 PIN_SLP(gpy6-6, INPUT, DOWN); 1229 PIN_SLP(gpy6-7, INPUT, DOWN); 1230 }; 1231}; 1232 1233&pinctrl_2 { 1234 pinctrl-names = "default"; 1235 pinctrl-0 = <&sleep2>; 1236 1237 sleep2: sleep-states { 1238 PIN_SLP(gpz-0, INPUT, DOWN); 1239 PIN_SLP(gpz-1, INPUT, DOWN); 1240 PIN_SLP(gpz-2, INPUT, DOWN); 1241 PIN_SLP(gpz-3, INPUT, DOWN); 1242 PIN_SLP(gpz-4, INPUT, DOWN); 1243 PIN_SLP(gpz-5, INPUT, DOWN); 1244 PIN_SLP(gpz-6, INPUT, DOWN); 1245 }; 1246}; 1247 1248&pinctrl_3 { 1249 pinctrl-names = "default"; 1250 pinctrl-0 = <&sleep3>; 1251 1252 sleep3: sleep-states { 1253 PIN_SLP(gpv0-0, INPUT, DOWN); 1254 PIN_SLP(gpv0-1, INPUT, DOWN); 1255 PIN_SLP(gpv0-2, INPUT, DOWN); 1256 PIN_SLP(gpv0-3, INPUT, DOWN); 1257 PIN_SLP(gpv0-4, INPUT, DOWN); 1258 PIN_SLP(gpv0-5, INPUT, DOWN); 1259 PIN_SLP(gpv0-6, INPUT, DOWN); 1260 PIN_SLP(gpv0-7, INPUT, DOWN); 1261 1262 PIN_SLP(gpv1-0, INPUT, DOWN); 1263 PIN_SLP(gpv1-1, INPUT, DOWN); 1264 PIN_SLP(gpv1-2, INPUT, DOWN); 1265 PIN_SLP(gpv1-3, INPUT, DOWN); 1266 PIN_SLP(gpv1-4, INPUT, DOWN); 1267 PIN_SLP(gpv1-5, INPUT, DOWN); 1268 PIN_SLP(gpv1-6, INPUT, DOWN); 1269 PIN_SLP(gpv1-7, INPUT, DOWN); 1270 1271 PIN_SLP(gpv2-0, INPUT, DOWN); 1272 PIN_SLP(gpv2-1, INPUT, DOWN); 1273 PIN_SLP(gpv2-2, INPUT, DOWN); 1274 PIN_SLP(gpv2-3, INPUT, DOWN); 1275 PIN_SLP(gpv2-4, INPUT, DOWN); 1276 PIN_SLP(gpv2-5, INPUT, DOWN); 1277 PIN_SLP(gpv2-6, INPUT, DOWN); 1278 PIN_SLP(gpv2-7, INPUT, DOWN); 1279 1280 PIN_SLP(gpv3-0, INPUT, DOWN); 1281 PIN_SLP(gpv3-1, INPUT, DOWN); 1282 PIN_SLP(gpv3-2, INPUT, DOWN); 1283 PIN_SLP(gpv3-3, INPUT, DOWN); 1284 PIN_SLP(gpv3-4, INPUT, DOWN); 1285 PIN_SLP(gpv3-5, INPUT, DOWN); 1286 PIN_SLP(gpv3-6, INPUT, DOWN); 1287 PIN_SLP(gpv3-7, INPUT, DOWN); 1288 1289 PIN_SLP(gpv4-0, INPUT, DOWN); 1290 }; 1291}; 1292