dove-cubox.dts revision 279385
1/dts-v1/; 2 3#include "dove.dtsi" 4 5/ { 6 model = "SolidRun CuBox"; 7 compatible = "solidrun,cubox", "marvell,dove"; 8 9 memory { 10 device_type = "memory"; 11 reg = <0x00000000 0x40000000>; 12 }; 13 14 chosen { 15 bootargs = "console=ttyS0,115200n8 earlyprintk"; 16 }; 17 18 leds { 19 compatible = "gpio-leds"; 20 pinctrl-0 = <&pmx_gpio_18>; 21 pinctrl-names = "default"; 22 23 power { 24 label = "Power"; 25 gpios = <&gpio0 18 1>; 26 default-state = "keep"; 27 }; 28 }; 29 30 regulators { 31 compatible = "simple-bus"; 32 #address-cells = <1>; 33 #size-cells = <0>; 34 35 usb_power: regulator@1 { 36 compatible = "regulator-fixed"; 37 reg = <1>; 38 regulator-name = "USB Power"; 39 regulator-min-microvolt = <5000000>; 40 regulator-max-microvolt = <5000000>; 41 enable-active-high; 42 regulator-always-on; 43 regulator-boot-on; 44 gpio = <&gpio0 1 0>; 45 pinctrl-0 = <&pmx_gpio_1>; 46 pinctrl-names = "default"; 47 }; 48 }; 49 50 clocks { 51 /* 25MHz reference crystal */ 52 ref25: oscillator { 53 compatible = "fixed-clock"; 54 #clock-cells = <0>; 55 clock-frequency = <25000000>; 56 }; 57 }; 58 59 ir_recv: ir-receiver { 60 compatible = "gpio-ir-receiver"; 61 gpios = <&gpio0 19 1>; 62 pinctrl-0 = <&pmx_gpio_19>; 63 pinctrl-names = "default"; 64 }; 65}; 66 67&uart0 { status = "okay"; }; 68&sata0 { status = "okay"; }; 69&mdio { status = "okay"; }; 70ð { status = "okay"; }; 71 72ðphy { 73 compatible = "marvell,88e1310"; 74 reg = <1>; 75}; 76 77&i2c0 { 78 status = "okay"; 79 clock-frequency = <100000>; 80 81 si5351: clock-generator { 82 compatible = "silabs,si5351a-msop"; 83 reg = <0x60>; 84 #address-cells = <1>; 85 #size-cells = <0>; 86 #clock-cells = <1>; 87 88 /* connect xtal input to 25MHz reference */ 89 clocks = <&ref25>; 90 91 /* connect xtal input as source of pll0 and pll1 */ 92 silabs,pll-source = <0 0>, <1 0>; 93 94 clkout0 { 95 reg = <0>; 96 silabs,drive-strength = <8>; 97 silabs,multisynth-source = <0>; 98 silabs,clock-source = <0>; 99 silabs,pll-master; 100 }; 101 102 clkout2 { 103 reg = <2>; 104 silabs,drive-strength = <8>; 105 silabs,multisynth-source = <1>; 106 silabs,clock-source = <0>; 107 silabs,pll-master; 108 }; 109 }; 110}; 111 112&sdio0 { 113 status = "okay"; 114}; 115 116&spi0 { 117 status = "okay"; 118 119 /* spi0.0: 4M Flash Winbond W25Q32BV */ 120 spi-flash@0 { 121 compatible = "st,w25q32"; 122 spi-max-frequency = <20000000>; 123 reg = <0>; 124 }; 125}; 126 127&audio1 { 128 status = "okay"; 129 clocks = <&gate_clk 13>, <&si5351 2>; 130 clock-names = "internal", "extclk"; 131 pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_audio1_extclk>; 132 pinctrl-names = "default"; 133}; 134