armada-370-dlink-dns327l.dts revision 302408
161560Sn_hibma/* 261560Sn_hibma * Device Tree file for D-Link DNS-327L 361560Sn_hibma * 461560Sn_hibma * Copyright (C) 2015, Andrew Andrianov <andrew@ncrmnt.org> 561560Sn_hibma * 661560Sn_hibma * This file is dual-licensed: you can use it either under the terms 761560Sn_hibma * of the GPL or the X11 license, at your option. Note that this dual 861560Sn_hibma * licensing only applies to this file, and not this project as a 961560Sn_hibma * whole. 1061560Sn_hibma * 1161560Sn_hibma * a) This file is free software; you can redistribute it and/or 1261560Sn_hibma * modify it under the terms of the GNU General Public License as 1361560Sn_hibma * published by the Free Software Foundation; either version 2 of the 1461560Sn_hibma * License, or (at your option) any later version. 1561560Sn_hibma * 1661560Sn_hibma * This file is distributed in the hope that it will be useful 1761560Sn_hibma * but WITHOUT ANY WARRANTY; without even the implied warranty of 1861560Sn_hibma * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 1961560Sn_hibma * GNU General Public License for more details. 2061560Sn_hibma * 2161560Sn_hibma * Or, alternatively 2261560Sn_hibma * 2361560Sn_hibma * b) Permission is hereby granted, free of charge, to any person 2461560Sn_hibma * obtaining a copy of this software and associated documentation 2561560Sn_hibma * files (the "Software"), to deal in the Software without 2661560Sn_hibma * restriction, including without limitation the rights to use 2761560Sn_hibma * copy, modify, merge, publish, distribute, sublicense, and/or 2861560Sn_hibma * sell copies of the Software, and to permit persons to whom the 2961560Sn_hibma * Software is furnished to do so, subject to the following 3061560Sn_hibma * conditions: 3161560Sn_hibma * 3261560Sn_hibma * The above copyright notice and this permission notice shall be 33205728Skaiw * included in all copies or substantial portions of the Software. 34205728Skaiw * 3561560Sn_hibma * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND 3661560Sn_hibma * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 37187994Salfred * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 38187994Salfred * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 39188945Sthompsa * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY 40187994Salfred * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 41187994Salfred * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 42187994Salfred * OTHER DEALINGS IN THE SOFTWARE. 43188945Sthompsa */ 44 45/* Remaining unsolved: 46 * There's still some unknown device on i2c address 0x13 47 */ 48 49/dts-v1/; 50 51#include <dt-bindings/input/input.h> 52#include <dt-bindings/gpio/gpio.h> 53#include "armada-370.dtsi" 54 55/ { 56 model = "D-Link DNS-327L"; 57 compatible = "dlink,dns327l", 58 "marvell,armada370", 59 "marvell,armada-370-xp"; 60 61 chosen { 62 stdout-path = &uart0; 63 }; 64 65 memory { 66 device_type = "memory"; 67 reg = <0x00000000 0x20000000>; /* 512 MiB */ 68 }; 69 70 soc { 71 ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 72 MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 73 MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; 74 75 pcie-controller { 76 status = "okay"; 77 78 pcie@1,0 { 79 /* Port 0, Lane 0 */ 80 status = "okay"; 81 }; 82 83 pcie@2,0 { 84 /* Port 1, Lane 0 */ 85 status = "okay"; 86 }; 87 }; 88 89 internal-regs { 90 sata@a0000 { 91 nr-ports = <2>; 92 status = "okay"; 93 }; 94 95 usb@50000 { 96 status = "okay"; 97 }; 98 99 nand@d0000 { 100 status = "okay"; 101 num-cs = <1>; 102 marvell,nand-keep-config; 103 marvell,nand-enable-arbiter; 104 nand-on-flash-bbt; 105 nand-ecc-strength = <4>; 106 nand-ecc-step-size = <512>; 107 108 partition@0 { 109 label = "u-boot"; 110 /* 1.0 MiB */ 111 reg = <0x0000000 0x100000>; 112 read-only; 113 }; 114 115 partition@100000 { 116 label = "u-boot-env"; 117 /* 128 KiB */ 118 reg = <0x100000 0x20000>; 119 read-only; 120 }; 121 122 partition@120000 { 123 label = "uImage"; 124 /* 7 MiB */ 125 reg = <0x120000 0x700000>; 126 }; 127 128 partition@820000 { 129 label = "ubifs"; 130 /* ~ 84 MiB */ 131 reg = <0x820000 0x54e0000>; 132 }; 133 134 /* Hardcoded into stock bootloader */ 135 partition@5d00000 { 136 label = "failsafe-uImage"; 137 /* 5 MiB */ 138 reg = <0x5d00000 0x500000>; 139 }; 140 141 partition@6200000 { 142 label = "failsafe-fs"; 143 /* 29 MiB */ 144 reg = <0x6200000 0x1d00000>; 145 }; 146 147 partition@7f00000 { 148 label = "bbt"; 149 /* 1 MiB for BBT */ 150 reg = <0x7f00000 0x100000>; 151 }; 152 }; 153 }; 154 }; 155 156 gpio-keys { 157 compatible = "gpio-keys"; 158 pinctrl-0 = < 159 &backup_button_pin 160 &power_button_pin 161 &reset_button_pin>; 162 pinctrl-names = "default"; 163 164 power-button { 165 label = "Power Button"; 166 linux,code = <KEY_POWER>; 167 gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; 168 }; 169 170 backup-button { 171 label = "Backup Button"; 172 linux,code = <KEY_COPY>; 173 gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; 174 }; 175 176 reset-button { 177 label = "Reset Button"; 178 linux,code = <KEY_RESTART>; 179 gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; 180 }; 181 }; 182 183 gpio-leds { 184 compatible = "gpio-leds"; 185 pinctrl-0 = < 186 &sata_l_amber_pin 187 &sata_r_amber_pin 188 &backup_led_pin 189 /* Ensure these are managed by hardware */ 190 &sata_l_white_pin 191 &sata_r_white_pin>; 192 193 pinctrl-names = "default"; 194 195 sata-r-amber-pin { 196 label = "dns327l:amber:sata-r"; 197 gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; 198 default-state = "keep"; 199 }; 200 201 sata-l-amber-pin { 202 label = "dns327l:amber:sata-l"; 203 gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; 204 default-state = "keep"; 205 }; 206 207 backup-led-pin { 208 label = "dns327l:white:usb"; 209 gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; 210 default-state = "keep"; 211 }; 212 }; 213 214 regulators { 215 compatible = "simple-bus"; 216 #address-cells = <1>; 217 #size-cells = <0>; 218 219 usb_power: regulator@1 { 220 compatible = "regulator-fixed"; 221 reg = <1>; 222 pinctrl-0 = <&xhci_pwr_pin>; 223 pinctrl-names = "default"; 224 regulator-name = "USB3.0 Port Power"; 225 regulator-min-microvolt = <5000000>; 226 regulator-max-microvolt = <5000000>; 227 enable-active-high; 228 regulator-boot-on; 229 regulator-always-on; 230 gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>; 231 }; 232 233 sata_r_power: regulator@2 { 234 compatible = "regulator-fixed"; 235 reg = <2>; 236 pinctrl-0 = <&sata_r_pwr_pin>; 237 pinctrl-names = "default"; 238 regulator-name = "SATA-R Power"; 239 regulator-min-microvolt = <5000000>; 240 regulator-max-microvolt = <5000000>; 241 startup-delay-us = <2000000>; 242 enable-active-high; 243 regulator-always-on; 244 regulator-boot-on; 245 gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; 246 }; 247 248 sata_l_power: regulator@3 { 249 compatible = "regulator-fixed"; 250 reg = <3>; 251 pinctrl-0 = <&sata_l_pwr_pin>; 252 pinctrl-names = "default"; 253 regulator-name = "SATA-L Power"; 254 regulator-min-microvolt = <5000000>; 255 regulator-max-microvolt = <5000000>; 256 startup-delay-us = <4000000>; 257 enable-active-high; 258 regulator-always-on; 259 regulator-boot-on; 260 gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>; 261 }; 262 }; 263}; 264 265&pinctrl { 266 sata_l_white_pin: sata-l-white-pin { 267 marvell,pins = "mpp57"; 268 marvell,function = "sata0"; 269 }; 270 271 sata_r_white_pin: sata-r-white-pin { 272 marvell,pins = "mpp55"; 273 marvell,function = "sata1"; 274 }; 275 276 sata_r_amber_pin: sata-r-amber-pin { 277 marvell,pins = "mpp52"; 278 marvell,function = "gpio"; 279 }; 280 281 sata_l_amber_pin: sata-l-amber-pin { 282 marvell,pins = "mpp53"; 283 marvell,function = "gpio"; 284 }; 285 286 backup_led_pin: backup-led-pin { 287 marvell,pins = "mpp61"; 288 marvell,function = "gpo"; 289 }; 290 291 xhci_pwr_pin: xhci-pwr-pin { 292 marvell,pins = "mpp13"; 293 marvell,function = "gpio"; 294 }; 295 296 sata_r_pwr_pin: sata-r-pwr-pin { 297 marvell,pins = "mpp54"; 298 marvell,function = "gpio"; 299 }; 300 301 sata_l_pwr_pin: sata-l-pwr-pin { 302 marvell,pins = "mpp56"; 303 marvell,function = "gpio"; 304 }; 305 306 uart1_pins: uart1-pins { 307 marvell,pins = "mpp60", "mpp61"; 308 marvell,function = "uart1"; 309 }; 310 311 power_button_pin: power-button-pin { 312 marvell,pins = "mpp65"; 313 marvell,function = "gpio"; 314 }; 315 316 backup_button_pin: backup-button-pin { 317 marvell,pins = "mpp63"; 318 marvell,function = "gpio"; 319 }; 320 321 reset_button_pin: reset-button-pin { 322 marvell,pins = "mpp64"; 323 marvell,function = "gpio"; 324 }; 325}; 326 327/* Serial console */ 328&uart0 { 329 status = "okay"; 330}; 331 332/* Connected to Weltrend MCU */ 333&uart1 { 334 pinctrl-0 = <&uart1_pins>; 335 pinctrl-names = "default"; 336 status = "okay"; 337}; 338 339&mdio { 340 phy0: ethernet-phy@0 { /* Marvell 88E1318 */ 341 reg = <0>; 342 marvell,reg-init = <0x0 0x16 0x0 0x0002>, 343 <0x0 0x19 0x0 0x0077>, 344 <0x0 0x18 0x0 0x5747>; 345 }; 346}; 347 348ð1 { 349 phy = <&phy0>; 350 phy-mode = "rgmii-id"; 351 status = "okay"; 352}; 353 354&i2c0 { 355 compatible = "marvell,mv64xxx-i2c"; 356 clock-frequency = <100000>; 357 status = "okay"; 358}; 359