armada-370-db.dts revision 295436
1/* 2 * Device Tree file for Marvell Armada 370 evaluation board 3 * (DB-88F6710-BP-DDR3) 4 * 5 * Copyright (C) 2012 Marvell 6 * 7 * Lior Amsalem <alior@marvell.com> 8 * Gregory CLEMENT <gregory.clement@free-electrons.com> 9 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> 10 * 11 * This file is dual-licensed: you can use it either under the terms 12 * of the GPL or the X11 license, at your option. Note that this dual 13 * licensing only applies to this file, and not this project as a 14 * whole. 15 * 16 * a) This file is free software; you can redistribute it and/or 17 * modify it under the terms of the GNU General Public License as 18 * published by the Free Software Foundation; either version 2 of the 19 * License, or (at your option) any later version. 20 * 21 * This file is distributed in the hope that it will be useful 22 * but WITHOUT ANY WARRANTY; without even the implied warranty of 23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 24 * GNU General Public License for more details. 25 * 26 * Or, alternatively 27 * 28 * b) Permission is hereby granted, free of charge, to any person 29 * obtaining a copy of this software and associated documentation 30 * files (the "Software"), to deal in the Software without 31 * restriction, including without limitation the rights to use 32 * copy, modify, merge, publish, distribute, sublicense, and/or 33 * sell copies of the Software, and to permit persons to whom the 34 * Software is furnished to do so, subject to the following 35 * conditions: 36 * 37 * The above copyright notice and this permission notice shall be 38 * included in all copies or substantial portions of the Software. 39 * 40 * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND 41 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 42 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 43 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 44 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY 45 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 46 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 47 * OTHER DEALINGS IN THE SOFTWARE. 48 * 49 * Note: this Device Tree assumes that the bootloader has remapped the 50 * internal registers to 0xf1000000 (instead of the default 51 * 0xd0000000). The 0xf1000000 is the default used by the recent, 52 * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier 53 * boards were delivered with an older version of the bootloader that 54 * left internal registers mapped at 0xd0000000. If you are in this 55 * situation, you should either update your bootloader (preferred 56 * solution) or the below Device Tree should be adjusted. 57 */ 58 59/dts-v1/; 60#include "armada-370.dtsi" 61 62/ { 63 model = "Marvell Armada 370 Evaluation Board"; 64 compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp"; 65 66 chosen { 67 stdout-path = "serial0:115200n8"; 68 }; 69 70 memory { 71 device_type = "memory"; 72 reg = <0x00000000 0x40000000>; /* 1 GB */ 73 }; 74 75 soc { 76 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 77 MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 78 MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; 79 80 internal-regs { 81 serial@12000 { 82 status = "okay"; 83 }; 84 sata@a0000 { 85 nr-ports = <2>; 86 status = "okay"; 87 }; 88 89 mdio { 90 pinctrl-0 = <&mdio_pins>; 91 pinctrl-names = "default"; 92 phy0: ethernet-phy@0 { 93 reg = <0>; 94 }; 95 96 phy1: ethernet-phy@1 { 97 reg = <1>; 98 }; 99 }; 100 101 ethernet@70000 { 102 pinctrl-0 = <&ge0_rgmii_pins>; 103 pinctrl-names = "default"; 104 status = "okay"; 105 phy = <&phy0>; 106 phy-mode = "rgmii-id"; 107 }; 108 ethernet@74000 { 109 pinctrl-0 = <&ge1_rgmii_pins>; 110 pinctrl-names = "default"; 111 status = "okay"; 112 phy = <&phy1>; 113 phy-mode = "rgmii-id"; 114 }; 115 116 i2c@11000 { 117 pinctrl-0 = <&i2c0_pins>; 118 pinctrl-names = "default"; 119 clock-frequency = <100000>; 120 status = "okay"; 121 audio_codec: audio-codec@4a { 122 #sound-dai-cells = <0>; 123 compatible = "cirrus,cs42l51"; 124 reg = <0x4a>; 125 }; 126 }; 127 128 audio-controller@30000 { 129 pinctrl-0 = <&i2s_pins2>; 130 pinctrl-names = "default"; 131 status = "okay"; 132 }; 133 134 mvsdio@d4000 { 135 pinctrl-0 = <&sdio_pins1>; 136 pinctrl-names = "default"; 137 /* 138 * This device is disabled by default, because 139 * using the SD card connector requires 140 * changing the default CON40 connector 141 * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a 142 * different connector 143 * "DB-88F6710_MPP_RGMII_SD_Jumper". 144 */ 145 status = "disabled"; 146 /* No CD or WP GPIOs */ 147 broken-cd; 148 }; 149 150 usb@50000 { 151 status = "okay"; 152 }; 153 154 usb@51000 { 155 status = "okay"; 156 }; 157 158 spi0: spi@10600 { 159 pinctrl-0 = <&spi0_pins2>; 160 pinctrl-names = "default"; 161 status = "okay"; 162 163 spi-flash@0 { 164 #address-cells = <1>; 165 #size-cells = <1>; 166 compatible = "mx25l25635e", "jedec,spi-nor"; 167 reg = <0>; /* Chip select 0 */ 168 spi-max-frequency = <50000000>; 169 }; 170 }; 171 }; 172 173 pcie-controller { 174 status = "okay"; 175 /* 176 * The two PCIe units are accessible through 177 * both standard PCIe slots and mini-PCIe 178 * slots on the board. 179 */ 180 pcie@1,0 { 181 /* Port 0, Lane 0 */ 182 status = "okay"; 183 }; 184 185 pcie@2,0 { 186 /* Port 1, Lane 0 */ 187 status = "okay"; 188 }; 189 }; 190 }; 191 192 sound { 193 compatible = "simple-audio-card"; 194 simple-audio-card,name = "Armada 370 DB Audio"; 195 simple-audio-card,mclk-fs = <256>; 196 simple-audio-card,widgets = 197 "Headphone", "Out Jack", 198 "Line", "In Jack"; 199 simple-audio-card,routing = 200 "Out Jack", "HPL", 201 "Out Jack", "HPR", 202 "AIN1L", "In Jack", 203 "AIN1L", "In Jack"; 204 status = "okay"; 205 206 simple-audio-card,dai-link@0 { 207 format = "i2s"; 208 cpu { 209 sound-dai = <&audio_controller 0>; 210 }; 211 212 codec { 213 sound-dai = <&audio_codec>; 214 }; 215 }; 216 217 simple-audio-card,dai-link@1 { 218 format = "i2s"; 219 cpu { 220 sound-dai = <&audio_controller 1>; 221 }; 222 223 codec { 224 sound-dai = <&spdif_out>; 225 }; 226 }; 227 228 simple-audio-card,dai-link@2 { 229 format = "i2s"; 230 cpu { 231 sound-dai = <&audio_controller 1>; 232 }; 233 234 codec { 235 sound-dai = <&spdif_in>; 236 }; 237 }; 238 }; 239 240 spdif_out: spdif-out { 241 #sound-dai-cells = <0>; 242 compatible = "linux,spdif-dit"; 243 }; 244 245 spdif_in: spdif-in { 246 #sound-dai-cells = <0>; 247 compatible = "linux,spdif-dir"; 248 }; 249}; 250