am43x-epos-evm.dts revision 303975
1/* 2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ 3 * 4 * This program is free software; you can redistribute it and/or modify 5 * it under the terms of the GNU General Public License version 2 as 6 * published by the Free Software Foundation. 7 */ 8 9/* AM43x EPOS EVM */ 10 11/dts-v1/; 12 13#include "am4372.dtsi" 14#include <dt-bindings/pinctrl/am43xx.h> 15#include <dt-bindings/gpio/gpio.h> 16#include <dt-bindings/pwm/pwm.h> 17#include <dt-bindings/sound/tlv320aic31xx-micbias.h> 18 19/ { 20 model = "TI AM43x EPOS EVM"; 21 compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43"; 22 23 aliases { 24 display0 = &lcd0; 25 }; 26 27 vmmcsd_fixed: fixedregulator-sd { 28 compatible = "regulator-fixed"; 29 regulator-name = "vmmcsd_fixed"; 30 regulator-min-microvolt = <3300000>; 31 regulator-max-microvolt = <3300000>; 32 enable-active-high; 33 }; 34 35 vbat: fixedregulator@0 { 36 compatible = "regulator-fixed"; 37 regulator-name = "vbat"; 38 regulator-min-microvolt = <5000000>; 39 regulator-max-microvolt = <5000000>; 40 regulator-boot-on; 41 }; 42 43 lcd0: display { 44 compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; 45 label = "lcd"; 46 47 panel-timing { 48 clock-frequency = <33000000>; 49 hactive = <800>; 50 vactive = <480>; 51 hfront-porch = <210>; 52 hback-porch = <16>; 53 hsync-len = <30>; 54 vback-porch = <10>; 55 vfront-porch = <22>; 56 vsync-len = <13>; 57 hsync-active = <0>; 58 vsync-active = <0>; 59 de-active = <1>; 60 pixelclk-active = <1>; 61 }; 62 63 port { 64 lcd_in: endpoint { 65 remote-endpoint = <&dpi_out>; 66 }; 67 }; 68 }; 69 70 matrix_keypad: matrix_keypad@0 { 71 compatible = "gpio-matrix-keypad"; 72 debounce-delay-ms = <5>; 73 col-scan-delay-us = <2>; 74 75 row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */ 76 &gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */ 77 &gpio0 14 GPIO_ACTIVE_HIGH /* Bank0, pin14 */ 78 &gpio0 15 GPIO_ACTIVE_HIGH>; /* Bank0, pin15 */ 79 80 col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH /* Bank3, pin9 */ 81 &gpio3 10 GPIO_ACTIVE_HIGH /* Bank3, pin10 */ 82 &gpio2 18 GPIO_ACTIVE_HIGH /* Bank2, pin18 */ 83 &gpio2 19 GPIO_ACTIVE_HIGH>; /* Bank2, pin19 */ 84 85 linux,keymap = <0x00000201 /* P1 */ 86 0x01000204 /* P4 */ 87 0x02000207 /* P7 */ 88 0x0300020a /* NUMERIC_STAR */ 89 0x00010202 /* P2 */ 90 0x01010205 /* P5 */ 91 0x02010208 /* P8 */ 92 0x03010200 /* P0 */ 93 0x00020203 /* P3 */ 94 0x01020206 /* P6 */ 95 0x02020209 /* P9 */ 96 0x0302020b /* NUMERIC_POUND */ 97 0x00030067 /* UP */ 98 0x0103006a /* RIGHT */ 99 0x0203006c /* DOWN */ 100 0x03030069>; /* LEFT */ 101 }; 102 103 backlight { 104 compatible = "pwm-backlight"; 105 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; 106 brightness-levels = <0 51 53 56 62 75 101 152 255>; 107 default-brightness-level = <8>; 108 }; 109 110 sound0: sound@0 { 111 compatible = "simple-audio-card"; 112 simple-audio-card,name = "AM43-EPOS-EVM"; 113 simple-audio-card,widgets = 114 "Microphone", "Microphone Jack", 115 "Headphone", "Headphone Jack", 116 "Speaker", "Speaker"; 117 simple-audio-card,routing = 118 "MIC1LP", "Microphone Jack", 119 "MIC1RP", "Microphone Jack", 120 "MIC1LP", "MICBIAS", 121 "MIC1RP", "MICBIAS", 122 "Headphone Jack", "HPL", 123 "Headphone Jack", "HPR", 124 "Speaker", "SPL", 125 "Speaker", "SPR"; 126 simple-audio-card,format = "dsp_b"; 127 simple-audio-card,bitclock-master = <&sound0_master>; 128 simple-audio-card,frame-master = <&sound0_master>; 129 simple-audio-card,bitclock-inversion; 130 131 simple-audio-card,cpu { 132 sound-dai = <&mcasp1>; 133 system-clock-frequency = <12000000>; 134 }; 135 136 sound0_master: simple-audio-card,codec { 137 sound-dai = <&tlv320aic3111>; 138 system-clock-frequency = <12000000>; 139 }; 140 }; 141}; 142 143&am43xx_pinmux { 144 cpsw_default: cpsw_default { 145 pinctrl-single,pins = < 146 /* Slave 1 */ 147 AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */ 148 AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ 149 AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ 150 AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxdv.rmii1_rxdv */ 151 AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ 152 AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ 153 AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ 154 AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ 155 AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */ 156 >; 157 }; 158 159 cpsw_sleep: cpsw_sleep { 160 pinctrl-single,pins = < 161 /* Slave 1 reset value */ 162 AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) 163 AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) 164 AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) 165 AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) 166 AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) 167 AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) 168 AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) 169 AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) 170 AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) 171 >; 172 }; 173 174 davinci_mdio_default: davinci_mdio_default { 175 pinctrl-single,pins = < 176 /* MDIO */ 177 AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ 178 AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ 179 >; 180 }; 181 182 davinci_mdio_sleep: davinci_mdio_sleep { 183 pinctrl-single,pins = < 184 /* MDIO reset value */ 185 AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) 186 AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) 187 >; 188 }; 189 190 i2c0_pins: pinmux_i2c0_pins { 191 pinctrl-single,pins = < 192 AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ 193 AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ 194 >; 195 }; 196 197 nand_flash_x8: nand_flash_x8 { 198 pinctrl-single,pins = < 199 AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.SELQSPIorNAND/GPIO */ 200 AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ 201 AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ 202 AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ 203 AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ 204 AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ 205 AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ 206 AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ 207 AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ 208 AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ 209 AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */ 210 AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ 211 AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ 212 AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ 213 AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ 214 AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ 215 >; 216 }; 217 218 ecap0_pins: backlight_pins { 219 pinctrl-single,pins = < 220 AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ 221 >; 222 }; 223 224 i2c2_pins: pinmux_i2c2_pins { 225 pinctrl-single,pins = < 226 AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_sda.i2c2_sda */ 227 AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_scl.i2c2_scl */ 228 >; 229 }; 230 231 spi0_pins: pinmux_spi0_pins { 232 pinctrl-single,pins = < 233 AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_clk.spi0_clk */ 234 AM4372_IOPAD(0x954, PIN_OUTPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */ 235 AM4372_IOPAD(0x958, PIN_INPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */ 236 AM4372_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ 237 >; 238 }; 239 240 spi1_pins: pinmux_spi1_pins { 241 pinctrl-single,pins = < 242 AM4372_IOPAD(0x990, PIN_INPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_clk */ 243 AM4372_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */ 244 AM4372_IOPAD(0x998, PIN_INPUT | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */ 245 AM4372_IOPAD(0x99c, PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */ 246 >; 247 }; 248 249 mmc1_pins: pinmux_mmc1_pins { 250 pinctrl-single,pins = < 251 AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ 252 >; 253 }; 254 255 qspi1_default: qspi1_default { 256 pinctrl-single,pins = < 257 AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3) 258 AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2) 259 AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3) 260 AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3) 261 AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3) 262 AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3) 263 >; 264 }; 265 266 pixcir_ts_pins: pixcir_ts_pins { 267 pinctrl-single,pins = < 268 AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */ 269 >; 270 }; 271 272 hdq_pins: pinmux_hdq_pins { 273 pinctrl-single,pins = < 274 AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1) /* cam1_wen.hdq_gpio */ 275 >; 276 }; 277 278 dss_pins: dss_pins { 279 pinctrl-single,pins = < 280 AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ 281 AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1) 282 AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1) 283 AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1) 284 AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1) 285 AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1) 286 AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1) 287 AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ 288 AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ 289 AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0) 290 AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0) 291 AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0) 292 AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0) 293 AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0) 294 AM4372_IOPAD(0x8B8, PIN_OUTPUT_PULLUP | MUX_MODE0) 295 AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0) 296 AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0) 297 AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0) 298 AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0) 299 AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0) 300 AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0) 301 AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0) 302 AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0) 303 AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ 304 AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ 305 AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ 306 AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ 307 AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ 308 >; 309 }; 310 311 display_mux_pins: display_mux_pins { 312 pinctrl-single,pins = < 313 /* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */ 314 AM4372_IOPAD(0x88C, PIN_OUTPUT_PULLUP | MUX_MODE7) 315 >; 316 }; 317 318 vpfe1_pins_default: vpfe1_pins_default { 319 pinctrl-single,pins = < 320 AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0 */ 321 AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0 */ 322 AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0 */ 323 AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0 */ 324 AM4372_IOPAD(0x9dc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0 */ 325 AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0 */ 326 AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0 */ 327 AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0 */ 328 AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0 */ 329 AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0 */ 330 AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0 */ 331 AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0 */ 332 AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0 */ 333 >; 334 }; 335 336 vpfe1_pins_sleep: vpfe1_pins_sleep { 337 pinctrl-single,pins = < 338 AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) 339 AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) 340 AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) 341 AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) 342 AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) 343 AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) 344 AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) 345 AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) 346 AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) 347 AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) 348 AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) 349 AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) 350 AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) 351 >; 352 }; 353 354 mcasp1_pins: mcasp1_pins { 355 pinctrl-single,pins = < 356 AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */ 357 AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */ 358 AM4372_IOPAD(0x9a8, PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */ 359 AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */ 360 >; 361 }; 362 363 mcasp1_sleep_pins: mcasp1_sleep_pins { 364 pinctrl-single,pins = < 365 AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7) 366 AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE7) 367 AM4372_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7) 368 AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE7) 369 >; 370 }; 371}; 372 373&mmc1 { 374 status = "okay"; 375 vmmc-supply = <&vmmcsd_fixed>; 376 bus-width = <4>; 377 pinctrl-names = "default"; 378 pinctrl-0 = <&mmc1_pins>; 379 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; 380}; 381 382&mac { 383 pinctrl-names = "default", "sleep"; 384 pinctrl-0 = <&cpsw_default>; 385 pinctrl-1 = <&cpsw_sleep>; 386 status = "okay"; 387}; 388 389&davinci_mdio { 390 pinctrl-names = "default", "sleep"; 391 pinctrl-0 = <&davinci_mdio_default>; 392 pinctrl-1 = <&davinci_mdio_sleep>; 393 status = "okay"; 394}; 395 396&cpsw_emac0 { 397 phy_id = <&davinci_mdio>, <16>; 398 phy-mode = "rmii"; 399}; 400 401&cpsw_emac1 { 402 phy_id = <&davinci_mdio>, <1>; 403 phy-mode = "rmii"; 404}; 405 406&phy_sel { 407 rmii-clock-ext; 408}; 409 410&i2c0 { 411 status = "okay"; 412 pinctrl-names = "default"; 413 pinctrl-0 = <&i2c0_pins>; 414 clock-frequency = <400000>; 415 416 tps65218: tps65218@24 { 417 reg = <0x24>; 418 compatible = "ti,tps65218"; 419 interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */ 420 interrupt-controller; 421 #interrupt-cells = <2>; 422 423 dcdc1: regulator-dcdc1 { 424 compatible = "ti,tps65218-dcdc1"; 425 regulator-name = "vdd_core"; 426 regulator-min-microvolt = <912000>; 427 regulator-max-microvolt = <1144000>; 428 regulator-boot-on; 429 regulator-always-on; 430 }; 431 432 dcdc2: regulator-dcdc2 { 433 compatible = "ti,tps65218-dcdc2"; 434 regulator-name = "vdd_mpu"; 435 regulator-min-microvolt = <912000>; 436 regulator-max-microvolt = <1378000>; 437 regulator-boot-on; 438 regulator-always-on; 439 }; 440 441 dcdc3: regulator-dcdc3 { 442 compatible = "ti,tps65218-dcdc3"; 443 regulator-name = "vdcdc3"; 444 regulator-min-microvolt = <1500000>; 445 regulator-max-microvolt = <1500000>; 446 regulator-boot-on; 447 regulator-always-on; 448 }; 449 450 dcdc4: regulator-dcdc4 { 451 compatible = "ti,tps65218-dcdc4"; 452 regulator-name = "vdcdc4"; 453 regulator-min-microvolt = <3300000>; 454 regulator-max-microvolt = <3300000>; 455 regulator-boot-on; 456 regulator-always-on; 457 }; 458 459 dcdc5: regulator-dcdc5 { 460 compatible = "ti,tps65218-dcdc5"; 461 regulator-name = "v1_0bat"; 462 regulator-min-microvolt = <1000000>; 463 regulator-max-microvolt = <1000000>; 464 }; 465 466 dcdc6: regulator-dcdc6 { 467 compatible = "ti,tps65218-dcdc6"; 468 regulator-name = "v1_8bat"; 469 regulator-min-microvolt = <1800000>; 470 regulator-max-microvolt = <1800000>; 471 }; 472 473 ldo1: regulator-ldo1 { 474 compatible = "ti,tps65218-ldo1"; 475 regulator-min-microvolt = <1800000>; 476 regulator-max-microvolt = <1800000>; 477 regulator-boot-on; 478 regulator-always-on; 479 }; 480 }; 481 482 at24@50 { 483 compatible = "at24,24c256"; 484 pagesize = <64>; 485 reg = <0x50>; 486 }; 487 488 pixcir_ts@5c { 489 compatible = "pixcir,pixcir_tangoc"; 490 pinctrl-names = "default"; 491 pinctrl-0 = <&pixcir_ts_pins>; 492 reg = <0x5c>; 493 interrupt-parent = <&gpio1>; 494 interrupts = <17 0>; 495 496 attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; 497 498 touchscreen-size-x = <1024>; 499 touchscreen-size-y = <600>; 500 }; 501 502 tlv320aic3111: tlv320aic3111@18 { 503 #sound-dai-cells = <0>; 504 compatible = "ti,tlv320aic3111"; 505 reg = <0x18>; 506 status = "okay"; 507 508 ai31xx-micbias-vg = <MICBIAS_2_0V>; 509 510 /* Regulators */ 511 HPVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */ 512 SPRVDD-supply = <&vbat>; /* vbat */ 513 SPLVDD-supply = <&vbat>; /* vbat */ 514 AVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */ 515 IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */ 516 DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */ 517 }; 518}; 519 520&i2c2 { 521 pinctrl-names = "default"; 522 pinctrl-0 = <&i2c2_pins>; 523 status = "okay"; 524}; 525 526&gpio0 { 527 status = "okay"; 528}; 529 530&gpio1 { 531 status = "okay"; 532}; 533 534&gpio2 { 535 pinctrl-names = "default"; 536 pinctrl-0 = <&display_mux_pins>; 537 status = "okay"; 538 539 p1 { 540 /* 541 * SelLCDorHDMI selects between display and audio paths: 542 * Low: HDMI display with audio via HDMI 543 * High: LCD display with analog audio via aic3111 codec 544 */ 545 gpio-hog; 546 gpios = <1 GPIO_ACTIVE_HIGH>; 547 output-high; 548 line-name = "SelLCDorHDMI"; 549 }; 550}; 551 552&gpio3 { 553 status = "okay"; 554}; 555 556&elm { 557 status = "okay"; 558}; 559 560&gpmc { 561 status = "okay"; /* Disable QSPI when enabling GPMC (NAND) */ 562 pinctrl-names = "default"; 563 pinctrl-0 = <&nand_flash_x8>; 564 ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ 565 nand@0,0 { 566 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ 567 ti,nand-ecc-opt = "bch16"; 568 ti,elm-id = <&elm>; 569 nand-bus-width = <8>; 570 gpmc,device-width = <1>; 571 gpmc,sync-clk-ps = <0>; 572 gpmc,cs-on-ns = <0>; 573 gpmc,cs-rd-off-ns = <40>; /* tCEA + tCHZ + 1 */ 574 gpmc,cs-wr-off-ns = <40>; 575 gpmc,adv-on-ns = <0>; /* cs-on-ns */ 576 gpmc,adv-rd-off-ns = <25>; /* min( tALH + tALS + 1) */ 577 gpmc,adv-wr-off-ns = <25>; /* min( tALH + tALS + 1) */ 578 gpmc,we-on-ns = <0>; /* cs-on-ns */ 579 gpmc,we-off-ns = <20>; /* we-on-time + tWP + 2 */ 580 gpmc,oe-on-ns = <3>; /* cs-on-ns + tRR + 2 */ 581 gpmc,oe-off-ns = <30>; /* oe-on-ns + tRP + 2 */ 582 gpmc,access-ns = <30>; /* tCEA + 4*/ 583 gpmc,rd-cycle-ns = <40>; 584 gpmc,wr-cycle-ns = <40>; 585 gpmc,wait-pin = <0>; 586 gpmc,bus-turnaround-ns = <0>; 587 gpmc,cycle2cycle-delay-ns = <0>; 588 gpmc,clk-activation-ns = <0>; 589 gpmc,wait-monitoring-ns = <0>; 590 gpmc,wr-access-ns = <40>; 591 gpmc,wr-data-mux-bus-ns = <0>; 592 /* MTD partition table */ 593 /* All SPL-* partitions are sized to minimal length 594 * which can be independently programmable. For 595 * NAND flash this is equal to size of erase-block */ 596 #address-cells = <1>; 597 #size-cells = <1>; 598 partition@0 { 599 label = "NAND.SPL"; 600 reg = <0x00000000 0x00040000>; 601 }; 602 partition@1 { 603 label = "NAND.SPL.backup1"; 604 reg = <0x00040000 0x00040000>; 605 }; 606 partition@2 { 607 label = "NAND.SPL.backup2"; 608 reg = <0x00080000 0x00040000>; 609 }; 610 partition@3 { 611 label = "NAND.SPL.backup3"; 612 reg = <0x000C0000 0x00040000>; 613 }; 614 partition@4 { 615 label = "NAND.u-boot-spl-os"; 616 reg = <0x00100000 0x00080000>; 617 }; 618 partition@5 { 619 label = "NAND.u-boot"; 620 reg = <0x00180000 0x00100000>; 621 }; 622 partition@6 { 623 label = "NAND.u-boot-env"; 624 reg = <0x00280000 0x00040000>; 625 }; 626 partition@7 { 627 label = "NAND.u-boot-env.backup1"; 628 reg = <0x002C0000 0x00040000>; 629 }; 630 partition@8 { 631 label = "NAND.kernel"; 632 reg = <0x00300000 0x00700000>; 633 }; 634 partition@9 { 635 label = "NAND.file-system"; 636 reg = <0x00a00000 0x1f600000>; 637 }; 638 }; 639}; 640 641&epwmss0 { 642 status = "okay"; 643}; 644 645&tscadc { 646 status = "okay"; 647 648 adc { 649 ti,adc-channels = <0 1 2 3 4 5 6 7>; 650 }; 651}; 652 653&ecap0 { 654 status = "okay"; 655 pinctrl-names = "default"; 656 pinctrl-0 = <&ecap0_pins>; 657}; 658 659&spi0 { 660 pinctrl-names = "default"; 661 pinctrl-0 = <&spi0_pins>; 662 status = "okay"; 663}; 664 665&spi1 { 666 pinctrl-names = "default"; 667 pinctrl-0 = <&spi1_pins>; 668 status = "okay"; 669}; 670 671&usb2_phy1 { 672 status = "okay"; 673}; 674 675&usb1 { 676 dr_mode = "peripheral"; 677 status = "okay"; 678}; 679 680&usb2_phy2 { 681 status = "okay"; 682}; 683 684&usb2 { 685 dr_mode = "host"; 686 status = "okay"; 687}; 688 689&qspi { 690 status = "disabled"; /* Disable GPMC (NAND) when enabling QSPI */ 691 pinctrl-names = "default"; 692 pinctrl-0 = <&qspi1_default>; 693 694 spi-max-frequency = <48000000>; 695 m25p80@0 { 696 compatible = "mx66l51235l"; 697 spi-max-frequency = <48000000>; 698 reg = <0>; 699 spi-cpol; 700 spi-cpha; 701 spi-tx-bus-width = <1>; 702 spi-rx-bus-width = <4>; 703 #address-cells = <1>; 704 #size-cells = <1>; 705 706 /* MTD partition table. 707 * The ROM checks the first 512KiB 708 * for a valid file to boot(XIP). 709 */ 710 partition@0 { 711 label = "QSPI.U_BOOT"; 712 reg = <0x00000000 0x000080000>; 713 }; 714 partition@1 { 715 label = "QSPI.U_BOOT.backup"; 716 reg = <0x00080000 0x00080000>; 717 }; 718 partition@2 { 719 label = "QSPI.U-BOOT-SPL_OS"; 720 reg = <0x00100000 0x00010000>; 721 }; 722 partition@3 { 723 label = "QSPI.U_BOOT_ENV"; 724 reg = <0x00110000 0x00010000>; 725 }; 726 partition@4 { 727 label = "QSPI.U-BOOT-ENV.backup"; 728 reg = <0x00120000 0x00010000>; 729 }; 730 partition@5 { 731 label = "QSPI.KERNEL"; 732 reg = <0x00130000 0x0800000>; 733 }; 734 partition@6 { 735 label = "QSPI.FILESYSTEM"; 736 reg = <0x00930000 0x36D0000>; 737 }; 738 }; 739}; 740 741&hdq { 742 status = "okay"; 743 pinctrl-names = "default"; 744 pinctrl-0 = <&hdq_pins>; 745}; 746 747&dss { 748 status = "ok"; 749 750 pinctrl-names = "default"; 751 pinctrl-0 = <&dss_pins>; 752 753 port { 754 dpi_out: endpoint@0 { 755 remote-endpoint = <&lcd_in>; 756 data-lines = <24>; 757 }; 758 }; 759}; 760 761&vpfe1 { 762 status = "okay"; 763 pinctrl-names = "default", "sleep"; 764 pinctrl-0 = <&vpfe1_pins_default>; 765 pinctrl-1 = <&vpfe1_pins_sleep>; 766 767 port { 768 vpfe1_ep: endpoint { 769 /* remote-endpoint = <&sensor>; add once we have it */ 770 ti,am437x-vpfe-interface = <0>; 771 bus-width = <8>; 772 hsync-active = <0>; 773 vsync-active = <0>; 774 }; 775 }; 776}; 777 778&mcasp1 { 779 #sound-dai-cells = <0>; 780 pinctrl-names = "default", "sleep"; 781 pinctrl-0 = <&mcasp1_pins>; 782 pinctrl-1 = <&mcasp1_sleep_pins>; 783 784 status = "okay"; 785 786 op-mode = <0>; /* MCASP_IIS_MODE */ 787 tdm-slots = <2>; 788 /* 4 serializer */ 789 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 790 1 2 0 0 791 >; 792 tx-num-evt = <32>; 793 rx-num-evt = <32>; 794}; 795