if_vx_pci.c revision 303975
1/*- 2 * Copyright (C) 1996 Naoki Hamada <nao@tom-yam.or.jp> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. Neither the name of the author nor the names of any co-contributors 14 * may be used to endorse or promote products derived from this software 15 * without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 30#include <sys/cdefs.h> 31__FBSDID("$FreeBSD: releng/11.0/sys/dev/vx/if_vx_pci.c 257176 2013-10-26 17:58:36Z glebius $"); 32 33#include <sys/param.h> 34#include <sys/systm.h> 35#include <sys/kernel.h> 36#include <sys/module.h> 37#include <sys/socket.h> 38 39#include <net/ethernet.h> 40#include <net/if.h> 41#include <net/if_var.h> 42#include <net/if_arp.h> 43 44#include <machine/bus.h> 45#include <machine/resource.h> 46#include <sys/bus.h> 47#include <sys/rman.h> 48 49#include <dev/pci/pcivar.h> 50#include <dev/pci/pcireg.h> 51 52#include <dev/vx/if_vxreg.h> 53#include <dev/vx/if_vxvar.h> 54 55static int vx_pci_shutdown(device_t); 56static int vx_pci_probe(device_t); 57static int vx_pci_attach(device_t); 58 59static device_method_t vx_methods[] = { 60 /* Device interface */ 61 DEVMETHOD(device_probe, vx_pci_probe), 62 DEVMETHOD(device_attach, vx_pci_attach), 63 DEVMETHOD(device_shutdown, vx_pci_shutdown), 64 65 DEVMETHOD_END 66}; 67 68static driver_t vx_driver = { 69 "vx", 70 vx_methods, 71 sizeof(struct vx_softc) 72}; 73 74static devclass_t vx_devclass; 75 76DRIVER_MODULE(vx, pci, vx_driver, vx_devclass, 0, 0); 77MODULE_DEPEND(vx, pci, 1, 1, 1); 78MODULE_DEPEND(vx, ether, 1, 1, 1); 79 80static int 81vx_pci_shutdown(device_t dev) 82{ 83 struct vx_softc *sc; 84 85 sc = device_get_softc(dev); 86 VX_LOCK(sc); 87 vx_stop(sc); 88 VX_UNLOCK(sc); 89 90 return (0); 91} 92 93static int 94vx_pci_probe(device_t dev) 95{ 96 u_int32_t device_id; 97 98 device_id = pci_read_config(dev, PCIR_DEVVENDOR, 4); 99 100 if (device_id == 0x590010b7ul) { 101 device_set_desc(dev, "3COM 3C590 Etherlink III PCI"); 102 return (BUS_PROBE_DEFAULT); 103 } 104 if (device_id == 0x595010b7ul || device_id == 0x595110b7ul || 105 device_id == 0x595210b7ul) { 106 device_set_desc(dev, "3COM 3C595 Etherlink III PCI"); 107 return (BUS_PROBE_DEFAULT); 108 } 109 /* 110 * The (Fast) Etherlink XL adapters are now supported by 111 * the xl driver, which uses bus master DMA and is much 112 * faster. (And which also supports the 3c905B. 113 */ 114 if (device_id == 0x900010b7ul || device_id == 0x900110b7ul) { 115 device_set_desc(dev, "3COM 3C900 Etherlink XL PCI"); 116 return (BUS_PROBE_LOW_PRIORITY); 117 } 118 if (device_id == 0x905010b7ul || device_id == 0x905110b7ul) { 119 device_set_desc(dev, "3COM 3C905 Etherlink XL PCI"); 120 return (BUS_PROBE_LOW_PRIORITY); 121 } 122 return (ENXIO); 123} 124 125static int 126vx_pci_attach(device_t dev) 127{ 128 struct vx_softc *sc; 129 int rid; 130 131 sc = device_get_softc(dev); 132 133 rid = PCIR_BAR(0); 134 sc->vx_res = 135 bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid, RF_ACTIVE); 136 137 if (sc->vx_res == NULL) 138 goto bad; 139 140 sc->vx_bst = rman_get_bustag(sc->vx_res); 141 sc->vx_bsh = rman_get_bushandle(sc->vx_res); 142 143 rid = 0; 144 sc->vx_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 145 RF_SHAREABLE | RF_ACTIVE); 146 147 if (sc->vx_irq == NULL) 148 goto bad; 149 150 if (vx_attach(dev) == 0) 151 goto bad; 152 153 if (bus_setup_intr(dev, sc->vx_irq, INTR_TYPE_NET | INTR_MPSAFE, 154 NULL, vx_intr, sc, &sc->vx_intrhand)) 155 goto bad_mtx; 156 157 /* defect check for 3C590 */ 158 if ((pci_read_config(dev, PCIR_DEVVENDOR, 4) >> 16) == 0x5900) { 159 GO_WINDOW(0); 160 if (vx_busy_eeprom(sc)) 161 goto bad_mtx; 162 CSR_WRITE_2(sc, VX_W0_EEPROM_COMMAND, 163 EEPROM_CMD_RD | EEPROM_SOFTINFO2); 164 if (vx_busy_eeprom(sc)) 165 goto bad_mtx; 166 if (!(CSR_READ_2(sc, VX_W0_EEPROM_DATA) & NO_RX_OVN_ANOMALY)) 167 device_printf(dev, 168 "Warning! Defective early revision adapter!\n"); 169 } 170 return (0); 171 172bad_mtx: 173 mtx_destroy(&sc->vx_mtx); 174 ether_ifdetach(sc->vx_ifp); 175 if_free(sc->vx_ifp); 176bad: 177 if (sc->vx_intrhand != NULL) 178 bus_teardown_intr(dev, sc->vx_irq, sc->vx_intrhand); 179 if (sc->vx_res != NULL) 180 bus_release_resource(dev, SYS_RES_IOPORT, 0, sc->vx_res); 181 if (sc->vx_irq != NULL) 182 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->vx_irq); 183 return (ENXIO); 184} 185