if_rl.c revision 193096
1/*- 2 * Copyright (c) 1997, 1998 3 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33#include <sys/cdefs.h> 34__FBSDID("$FreeBSD: head/sys/pci/if_rl.c 193096 2009-05-30 15:14:44Z attilio $"); 35 36/* 37 * RealTek 8129/8139 PCI NIC driver 38 * 39 * Supports several extremely cheap PCI 10/100 adapters based on 40 * the RealTek chipset. Datasheets can be obtained from 41 * www.realtek.com.tw. 42 * 43 * Written by Bill Paul <wpaul@ctr.columbia.edu> 44 * Electrical Engineering Department 45 * Columbia University, New York City 46 */ 47/* 48 * The RealTek 8139 PCI NIC redefines the meaning of 'low end.' This is 49 * probably the worst PCI ethernet controller ever made, with the possible 50 * exception of the FEAST chip made by SMC. The 8139 supports bus-master 51 * DMA, but it has a terrible interface that nullifies any performance 52 * gains that bus-master DMA usually offers. 53 * 54 * For transmission, the chip offers a series of four TX descriptor 55 * registers. Each transmit frame must be in a contiguous buffer, aligned 56 * on a longword (32-bit) boundary. This means we almost always have to 57 * do mbuf copies in order to transmit a frame, except in the unlikely 58 * case where a) the packet fits into a single mbuf, and b) the packet 59 * is 32-bit aligned within the mbuf's data area. The presence of only 60 * four descriptor registers means that we can never have more than four 61 * packets queued for transmission at any one time. 62 * 63 * Reception is not much better. The driver has to allocate a single large 64 * buffer area (up to 64K in size) into which the chip will DMA received 65 * frames. Because we don't know where within this region received packets 66 * will begin or end, we have no choice but to copy data from the buffer 67 * area into mbufs in order to pass the packets up to the higher protocol 68 * levels. 69 * 70 * It's impossible given this rotten design to really achieve decent 71 * performance at 100Mbps, unless you happen to have a 400Mhz PII or 72 * some equally overmuscled CPU to drive it. 73 * 74 * On the bright side, the 8139 does have a built-in PHY, although 75 * rather than using an MDIO serial interface like most other NICs, the 76 * PHY registers are directly accessible through the 8139's register 77 * space. The 8139 supports autonegotiation, as well as a 64-bit multicast 78 * filter. 79 * 80 * The 8129 chip is an older version of the 8139 that uses an external PHY 81 * chip. The 8129 has a serial MDIO interface for accessing the MII where 82 * the 8139 lets you directly access the on-board PHY registers. We need 83 * to select which interface to use depending on the chip type. 84 */ 85 86#ifdef HAVE_KERNEL_OPTION_HEADERS 87#include "opt_device_polling.h" 88#endif 89 90#include <sys/param.h> 91#include <sys/endian.h> 92#include <sys/systm.h> 93#include <sys/sockio.h> 94#include <sys/mbuf.h> 95#include <sys/malloc.h> 96#include <sys/kernel.h> 97#include <sys/module.h> 98#include <sys/socket.h> 99#include <sys/sysctl.h> 100 101#include <net/if.h> 102#include <net/if_arp.h> 103#include <net/ethernet.h> 104#include <net/if_dl.h> 105#include <net/if_media.h> 106#include <net/if_types.h> 107 108#include <net/bpf.h> 109 110#include <machine/bus.h> 111#include <machine/resource.h> 112#include <sys/bus.h> 113#include <sys/rman.h> 114 115#include <dev/mii/mii.h> 116#include <dev/mii/miivar.h> 117 118#include <dev/pci/pcireg.h> 119#include <dev/pci/pcivar.h> 120 121MODULE_DEPEND(rl, pci, 1, 1, 1); 122MODULE_DEPEND(rl, ether, 1, 1, 1); 123MODULE_DEPEND(rl, miibus, 1, 1, 1); 124 125/* "device miibus" required. See GENERIC if you get errors here. */ 126#include "miibus_if.h" 127 128/* 129 * Default to using PIO access for this driver. On SMP systems, 130 * there appear to be problems with memory mapped mode: it looks like 131 * doing too many memory mapped access back to back in rapid succession 132 * can hang the bus. I'm inclined to blame this on crummy design/construction 133 * on the part of RealTek. Memory mapped mode does appear to work on 134 * uniprocessor systems though. 135 */ 136#define RL_USEIOSPACE 137 138#include <pci/if_rlreg.h> 139 140/* 141 * Various supported device vendors/types and their names. 142 */ 143static struct rl_type rl_devs[] = { 144 { RT_VENDORID, RT_DEVICEID_8129, RL_8129, 145 "RealTek 8129 10/100BaseTX" }, 146 { RT_VENDORID, RT_DEVICEID_8139, RL_8139, 147 "RealTek 8139 10/100BaseTX" }, 148 { RT_VENDORID, RT_DEVICEID_8139D, RL_8139, 149 "RealTek 8139 10/100BaseTX" }, 150 { RT_VENDORID, RT_DEVICEID_8138, RL_8139, 151 "RealTek 8139 10/100BaseTX CardBus" }, 152 { RT_VENDORID, RT_DEVICEID_8100, RL_8139, 153 "RealTek 8100 10/100BaseTX" }, 154 { ACCTON_VENDORID, ACCTON_DEVICEID_5030, RL_8139, 155 "Accton MPX 5030/5038 10/100BaseTX" }, 156 { DELTA_VENDORID, DELTA_DEVICEID_8139, RL_8139, 157 "Delta Electronics 8139 10/100BaseTX" }, 158 { ADDTRON_VENDORID, ADDTRON_DEVICEID_8139, RL_8139, 159 "Addtron Technology 8139 10/100BaseTX" }, 160 { DLINK_VENDORID, DLINK_DEVICEID_530TXPLUS, RL_8139, 161 "D-Link DFE-530TX+ 10/100BaseTX" }, 162 { DLINK_VENDORID, DLINK_DEVICEID_690TXD, RL_8139, 163 "D-Link DFE-690TXD 10/100BaseTX" }, 164 { NORTEL_VENDORID, ACCTON_DEVICEID_5030, RL_8139, 165 "Nortel Networks 10/100BaseTX" }, 166 { COREGA_VENDORID, COREGA_DEVICEID_FETHERCBTXD, RL_8139, 167 "Corega FEther CB-TXD" }, 168 { COREGA_VENDORID, COREGA_DEVICEID_FETHERIICBTXD, RL_8139, 169 "Corega FEtherII CB-TXD" }, 170 { PEPPERCON_VENDORID, PEPPERCON_DEVICEID_ROLF, RL_8139, 171 "Peppercon AG ROL-F" }, 172 { PLANEX_VENDORID, PLANEX_DEVICEID_FNW3603TX, RL_8139, 173 "Planex FNW-3603-TX" }, 174 { PLANEX_VENDORID, PLANEX_DEVICEID_FNW3800TX, RL_8139, 175 "Planex FNW-3800-TX" }, 176 { CP_VENDORID, RT_DEVICEID_8139, RL_8139, 177 "Compaq HNE-300" }, 178 { LEVEL1_VENDORID, LEVEL1_DEVICEID_FPC0106TX, RL_8139, 179 "LevelOne FPC-0106TX" }, 180 { EDIMAX_VENDORID, EDIMAX_DEVICEID_EP4103DL, RL_8139, 181 "Edimax EP-4103DL CardBus" } 182}; 183 184static int rl_attach(device_t); 185static int rl_detach(device_t); 186static void rl_dmamap_cb(void *, bus_dma_segment_t *, int, int); 187static int rl_dma_alloc(struct rl_softc *); 188static void rl_dma_free(struct rl_softc *); 189static void rl_eeprom_putbyte(struct rl_softc *, int); 190static void rl_eeprom_getword(struct rl_softc *, int, uint16_t *); 191static int rl_encap(struct rl_softc *, struct mbuf **); 192static int rl_list_tx_init(struct rl_softc *); 193static int rl_list_rx_init(struct rl_softc *); 194static int rl_ifmedia_upd(struct ifnet *); 195static void rl_ifmedia_sts(struct ifnet *, struct ifmediareq *); 196static int rl_ioctl(struct ifnet *, u_long, caddr_t); 197static void rl_intr(void *); 198static void rl_init(void *); 199static void rl_init_locked(struct rl_softc *sc); 200static void rl_mii_send(struct rl_softc *, uint32_t, int); 201static void rl_mii_sync(struct rl_softc *); 202static int rl_mii_readreg(struct rl_softc *, struct rl_mii_frame *); 203static int rl_mii_writereg(struct rl_softc *, struct rl_mii_frame *); 204static int rl_miibus_readreg(device_t, int, int); 205static void rl_miibus_statchg(device_t); 206static int rl_miibus_writereg(device_t, int, int, int); 207#ifdef DEVICE_POLLING 208static int rl_poll(struct ifnet *ifp, enum poll_cmd cmd, int count); 209static int rl_poll_locked(struct ifnet *ifp, enum poll_cmd cmd, int count); 210#endif 211static int rl_probe(device_t); 212static void rl_read_eeprom(struct rl_softc *, uint8_t *, int, int, int); 213static void rl_reset(struct rl_softc *); 214static int rl_resume(device_t); 215static int rl_rxeof(struct rl_softc *); 216static void rl_setmulti(struct rl_softc *); 217static int rl_shutdown(device_t); 218static void rl_start(struct ifnet *); 219static void rl_start_locked(struct ifnet *); 220static void rl_stop(struct rl_softc *); 221static int rl_suspend(device_t); 222static void rl_tick(void *); 223static void rl_txeof(struct rl_softc *); 224static void rl_watchdog(struct rl_softc *); 225 226#ifdef RL_USEIOSPACE 227#define RL_RES SYS_RES_IOPORT 228#define RL_RID RL_PCI_LOIO 229#else 230#define RL_RES SYS_RES_MEMORY 231#define RL_RID RL_PCI_LOMEM 232#endif 233 234static device_method_t rl_methods[] = { 235 /* Device interface */ 236 DEVMETHOD(device_probe, rl_probe), 237 DEVMETHOD(device_attach, rl_attach), 238 DEVMETHOD(device_detach, rl_detach), 239 DEVMETHOD(device_suspend, rl_suspend), 240 DEVMETHOD(device_resume, rl_resume), 241 DEVMETHOD(device_shutdown, rl_shutdown), 242 243 /* bus interface */ 244 DEVMETHOD(bus_print_child, bus_generic_print_child), 245 DEVMETHOD(bus_driver_added, bus_generic_driver_added), 246 247 /* MII interface */ 248 DEVMETHOD(miibus_readreg, rl_miibus_readreg), 249 DEVMETHOD(miibus_writereg, rl_miibus_writereg), 250 DEVMETHOD(miibus_statchg, rl_miibus_statchg), 251 252 { 0, 0 } 253}; 254 255static driver_t rl_driver = { 256 "rl", 257 rl_methods, 258 sizeof(struct rl_softc) 259}; 260 261static devclass_t rl_devclass; 262 263DRIVER_MODULE(rl, pci, rl_driver, rl_devclass, 0, 0); 264DRIVER_MODULE(rl, cardbus, rl_driver, rl_devclass, 0, 0); 265DRIVER_MODULE(miibus, rl, miibus_driver, miibus_devclass, 0, 0); 266 267#define EE_SET(x) \ 268 CSR_WRITE_1(sc, RL_EECMD, \ 269 CSR_READ_1(sc, RL_EECMD) | x) 270 271#define EE_CLR(x) \ 272 CSR_WRITE_1(sc, RL_EECMD, \ 273 CSR_READ_1(sc, RL_EECMD) & ~x) 274 275/* 276 * Send a read command and address to the EEPROM, check for ACK. 277 */ 278static void 279rl_eeprom_putbyte(struct rl_softc *sc, int addr) 280{ 281 register int d, i; 282 283 d = addr | sc->rl_eecmd_read; 284 285 /* 286 * Feed in each bit and strobe the clock. 287 */ 288 for (i = 0x400; i; i >>= 1) { 289 if (d & i) { 290 EE_SET(RL_EE_DATAIN); 291 } else { 292 EE_CLR(RL_EE_DATAIN); 293 } 294 DELAY(100); 295 EE_SET(RL_EE_CLK); 296 DELAY(150); 297 EE_CLR(RL_EE_CLK); 298 DELAY(100); 299 } 300} 301 302/* 303 * Read a word of data stored in the EEPROM at address 'addr.' 304 */ 305static void 306rl_eeprom_getword(struct rl_softc *sc, int addr, uint16_t *dest) 307{ 308 register int i; 309 uint16_t word = 0; 310 311 /* Enter EEPROM access mode. */ 312 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_PROGRAM|RL_EE_SEL); 313 314 /* 315 * Send address of word we want to read. 316 */ 317 rl_eeprom_putbyte(sc, addr); 318 319 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_PROGRAM|RL_EE_SEL); 320 321 /* 322 * Start reading bits from EEPROM. 323 */ 324 for (i = 0x8000; i; i >>= 1) { 325 EE_SET(RL_EE_CLK); 326 DELAY(100); 327 if (CSR_READ_1(sc, RL_EECMD) & RL_EE_DATAOUT) 328 word |= i; 329 EE_CLR(RL_EE_CLK); 330 DELAY(100); 331 } 332 333 /* Turn off EEPROM access mode. */ 334 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); 335 336 *dest = word; 337} 338 339/* 340 * Read a sequence of words from the EEPROM. 341 */ 342static void 343rl_read_eeprom(struct rl_softc *sc, uint8_t *dest, int off, int cnt, int swap) 344{ 345 int i; 346 uint16_t word = 0, *ptr; 347 348 for (i = 0; i < cnt; i++) { 349 rl_eeprom_getword(sc, off + i, &word); 350 ptr = (uint16_t *)(dest + (i * 2)); 351 if (swap) 352 *ptr = ntohs(word); 353 else 354 *ptr = word; 355 } 356} 357 358/* 359 * MII access routines are provided for the 8129, which 360 * doesn't have a built-in PHY. For the 8139, we fake things 361 * up by diverting rl_phy_readreg()/rl_phy_writereg() to the 362 * direct access PHY registers. 363 */ 364#define MII_SET(x) \ 365 CSR_WRITE_1(sc, RL_MII, \ 366 CSR_READ_1(sc, RL_MII) | (x)) 367 368#define MII_CLR(x) \ 369 CSR_WRITE_1(sc, RL_MII, \ 370 CSR_READ_1(sc, RL_MII) & ~(x)) 371 372/* 373 * Sync the PHYs by setting data bit and strobing the clock 32 times. 374 */ 375static void 376rl_mii_sync(struct rl_softc *sc) 377{ 378 register int i; 379 380 MII_SET(RL_MII_DIR|RL_MII_DATAOUT); 381 382 for (i = 0; i < 32; i++) { 383 MII_SET(RL_MII_CLK); 384 DELAY(1); 385 MII_CLR(RL_MII_CLK); 386 DELAY(1); 387 } 388} 389 390/* 391 * Clock a series of bits through the MII. 392 */ 393static void 394rl_mii_send(struct rl_softc *sc, uint32_t bits, int cnt) 395{ 396 int i; 397 398 MII_CLR(RL_MII_CLK); 399 400 for (i = (0x1 << (cnt - 1)); i; i >>= 1) { 401 if (bits & i) { 402 MII_SET(RL_MII_DATAOUT); 403 } else { 404 MII_CLR(RL_MII_DATAOUT); 405 } 406 DELAY(1); 407 MII_CLR(RL_MII_CLK); 408 DELAY(1); 409 MII_SET(RL_MII_CLK); 410 } 411} 412 413/* 414 * Read an PHY register through the MII. 415 */ 416static int 417rl_mii_readreg(struct rl_softc *sc, struct rl_mii_frame *frame) 418{ 419 int i, ack; 420 421 /* Set up frame for RX. */ 422 frame->mii_stdelim = RL_MII_STARTDELIM; 423 frame->mii_opcode = RL_MII_READOP; 424 frame->mii_turnaround = 0; 425 frame->mii_data = 0; 426 427 CSR_WRITE_2(sc, RL_MII, 0); 428 429 /* Turn on data xmit. */ 430 MII_SET(RL_MII_DIR); 431 432 rl_mii_sync(sc); 433 434 /* Send command/address info. */ 435 rl_mii_send(sc, frame->mii_stdelim, 2); 436 rl_mii_send(sc, frame->mii_opcode, 2); 437 rl_mii_send(sc, frame->mii_phyaddr, 5); 438 rl_mii_send(sc, frame->mii_regaddr, 5); 439 440 /* Idle bit */ 441 MII_CLR((RL_MII_CLK|RL_MII_DATAOUT)); 442 DELAY(1); 443 MII_SET(RL_MII_CLK); 444 DELAY(1); 445 446 /* Turn off xmit. */ 447 MII_CLR(RL_MII_DIR); 448 449 /* Check for ack */ 450 MII_CLR(RL_MII_CLK); 451 DELAY(1); 452 ack = CSR_READ_2(sc, RL_MII) & RL_MII_DATAIN; 453 MII_SET(RL_MII_CLK); 454 DELAY(1); 455 456 /* 457 * Now try reading data bits. If the ack failed, we still 458 * need to clock through 16 cycles to keep the PHY(s) in sync. 459 */ 460 if (ack) { 461 for(i = 0; i < 16; i++) { 462 MII_CLR(RL_MII_CLK); 463 DELAY(1); 464 MII_SET(RL_MII_CLK); 465 DELAY(1); 466 } 467 goto fail; 468 } 469 470 for (i = 0x8000; i; i >>= 1) { 471 MII_CLR(RL_MII_CLK); 472 DELAY(1); 473 if (!ack) { 474 if (CSR_READ_2(sc, RL_MII) & RL_MII_DATAIN) 475 frame->mii_data |= i; 476 DELAY(1); 477 } 478 MII_SET(RL_MII_CLK); 479 DELAY(1); 480 } 481 482fail: 483 MII_CLR(RL_MII_CLK); 484 DELAY(1); 485 MII_SET(RL_MII_CLK); 486 DELAY(1); 487 488 return (ack ? 1 : 0); 489} 490 491/* 492 * Write to a PHY register through the MII. 493 */ 494static int 495rl_mii_writereg(struct rl_softc *sc, struct rl_mii_frame *frame) 496{ 497 498 /* Set up frame for TX. */ 499 frame->mii_stdelim = RL_MII_STARTDELIM; 500 frame->mii_opcode = RL_MII_WRITEOP; 501 frame->mii_turnaround = RL_MII_TURNAROUND; 502 503 /* Turn on data output. */ 504 MII_SET(RL_MII_DIR); 505 506 rl_mii_sync(sc); 507 508 rl_mii_send(sc, frame->mii_stdelim, 2); 509 rl_mii_send(sc, frame->mii_opcode, 2); 510 rl_mii_send(sc, frame->mii_phyaddr, 5); 511 rl_mii_send(sc, frame->mii_regaddr, 5); 512 rl_mii_send(sc, frame->mii_turnaround, 2); 513 rl_mii_send(sc, frame->mii_data, 16); 514 515 /* Idle bit. */ 516 MII_SET(RL_MII_CLK); 517 DELAY(1); 518 MII_CLR(RL_MII_CLK); 519 DELAY(1); 520 521 /* Turn off xmit. */ 522 MII_CLR(RL_MII_DIR); 523 524 return (0); 525} 526 527static int 528rl_miibus_readreg(device_t dev, int phy, int reg) 529{ 530 struct rl_softc *sc; 531 struct rl_mii_frame frame; 532 uint16_t rval = 0; 533 uint16_t rl8139_reg = 0; 534 535 sc = device_get_softc(dev); 536 537 if (sc->rl_type == RL_8139) { 538 /* Pretend the internal PHY is only at address 0 */ 539 if (phy) { 540 return (0); 541 } 542 switch (reg) { 543 case MII_BMCR: 544 rl8139_reg = RL_BMCR; 545 break; 546 case MII_BMSR: 547 rl8139_reg = RL_BMSR; 548 break; 549 case MII_ANAR: 550 rl8139_reg = RL_ANAR; 551 break; 552 case MII_ANER: 553 rl8139_reg = RL_ANER; 554 break; 555 case MII_ANLPAR: 556 rl8139_reg = RL_LPAR; 557 break; 558 case MII_PHYIDR1: 559 case MII_PHYIDR2: 560 return (0); 561 /* 562 * Allow the rlphy driver to read the media status 563 * register. If we have a link partner which does not 564 * support NWAY, this is the register which will tell 565 * us the results of parallel detection. 566 */ 567 case RL_MEDIASTAT: 568 rval = CSR_READ_1(sc, RL_MEDIASTAT); 569 return (rval); 570 default: 571 device_printf(sc->rl_dev, "bad phy register\n"); 572 return (0); 573 } 574 rval = CSR_READ_2(sc, rl8139_reg); 575 return (rval); 576 } 577 578 bzero((char *)&frame, sizeof(frame)); 579 frame.mii_phyaddr = phy; 580 frame.mii_regaddr = reg; 581 rl_mii_readreg(sc, &frame); 582 583 return (frame.mii_data); 584} 585 586static int 587rl_miibus_writereg(device_t dev, int phy, int reg, int data) 588{ 589 struct rl_softc *sc; 590 struct rl_mii_frame frame; 591 uint16_t rl8139_reg = 0; 592 593 sc = device_get_softc(dev); 594 595 if (sc->rl_type == RL_8139) { 596 /* Pretend the internal PHY is only at address 0 */ 597 if (phy) { 598 return (0); 599 } 600 switch (reg) { 601 case MII_BMCR: 602 rl8139_reg = RL_BMCR; 603 break; 604 case MII_BMSR: 605 rl8139_reg = RL_BMSR; 606 break; 607 case MII_ANAR: 608 rl8139_reg = RL_ANAR; 609 break; 610 case MII_ANER: 611 rl8139_reg = RL_ANER; 612 break; 613 case MII_ANLPAR: 614 rl8139_reg = RL_LPAR; 615 break; 616 case MII_PHYIDR1: 617 case MII_PHYIDR2: 618 return (0); 619 break; 620 default: 621 device_printf(sc->rl_dev, "bad phy register\n"); 622 return (0); 623 } 624 CSR_WRITE_2(sc, rl8139_reg, data); 625 return (0); 626 } 627 628 bzero((char *)&frame, sizeof(frame)); 629 frame.mii_phyaddr = phy; 630 frame.mii_regaddr = reg; 631 frame.mii_data = data; 632 rl_mii_writereg(sc, &frame); 633 634 return (0); 635} 636 637static void 638rl_miibus_statchg(device_t dev) 639{ 640 struct rl_softc *sc; 641 struct ifnet *ifp; 642 struct mii_data *mii; 643 644 sc = device_get_softc(dev); 645 mii = device_get_softc(sc->rl_miibus); 646 ifp = sc->rl_ifp; 647 if (mii == NULL || ifp == NULL || 648 (ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) 649 return; 650 651 sc->rl_flags &= ~RL_FLAG_LINK; 652 if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) == 653 (IFM_ACTIVE | IFM_AVALID)) { 654 switch (IFM_SUBTYPE(mii->mii_media_active)) { 655 case IFM_10_T: 656 case IFM_100_TX: 657 sc->rl_flags |= RL_FLAG_LINK; 658 break; 659 default: 660 break; 661 } 662 } 663 /* 664 * RealTek controllers do not provide any interface to 665 * Tx/Rx MACs for resolved speed, duplex and flow-control 666 * parameters. 667 */ 668} 669 670/* 671 * Program the 64-bit multicast hash filter. 672 */ 673static void 674rl_setmulti(struct rl_softc *sc) 675{ 676 struct ifnet *ifp = sc->rl_ifp; 677 int h = 0; 678 uint32_t hashes[2] = { 0, 0 }; 679 struct ifmultiaddr *ifma; 680 uint32_t rxfilt; 681 int mcnt = 0; 682 683 RL_LOCK_ASSERT(sc); 684 685 rxfilt = CSR_READ_4(sc, RL_RXCFG); 686 687 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { 688 rxfilt |= RL_RXCFG_RX_MULTI; 689 CSR_WRITE_4(sc, RL_RXCFG, rxfilt); 690 CSR_WRITE_4(sc, RL_MAR0, 0xFFFFFFFF); 691 CSR_WRITE_4(sc, RL_MAR4, 0xFFFFFFFF); 692 return; 693 } 694 695 /* first, zot all the existing hash bits */ 696 CSR_WRITE_4(sc, RL_MAR0, 0); 697 CSR_WRITE_4(sc, RL_MAR4, 0); 698 699 /* now program new ones */ 700 IF_ADDR_LOCK(ifp); 701 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { 702 if (ifma->ifma_addr->sa_family != AF_LINK) 703 continue; 704 h = ether_crc32_be(LLADDR((struct sockaddr_dl *) 705 ifma->ifma_addr), ETHER_ADDR_LEN) >> 26; 706 if (h < 32) 707 hashes[0] |= (1 << h); 708 else 709 hashes[1] |= (1 << (h - 32)); 710 mcnt++; 711 } 712 IF_ADDR_UNLOCK(ifp); 713 714 if (mcnt) 715 rxfilt |= RL_RXCFG_RX_MULTI; 716 else 717 rxfilt &= ~RL_RXCFG_RX_MULTI; 718 719 CSR_WRITE_4(sc, RL_RXCFG, rxfilt); 720 CSR_WRITE_4(sc, RL_MAR0, hashes[0]); 721 CSR_WRITE_4(sc, RL_MAR4, hashes[1]); 722} 723 724static void 725rl_reset(struct rl_softc *sc) 726{ 727 register int i; 728 729 RL_LOCK_ASSERT(sc); 730 731 CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_RESET); 732 733 for (i = 0; i < RL_TIMEOUT; i++) { 734 DELAY(10); 735 if (!(CSR_READ_1(sc, RL_COMMAND) & RL_CMD_RESET)) 736 break; 737 } 738 if (i == RL_TIMEOUT) 739 device_printf(sc->rl_dev, "reset never completed!\n"); 740} 741 742/* 743 * Probe for a RealTek 8129/8139 chip. Check the PCI vendor and device 744 * IDs against our list and return a device name if we find a match. 745 */ 746static int 747rl_probe(device_t dev) 748{ 749 struct rl_type *t; 750 uint16_t devid, revid, vendor; 751 int i; 752 753 vendor = pci_get_vendor(dev); 754 devid = pci_get_device(dev); 755 revid = pci_get_revid(dev); 756 757 if (vendor == RT_VENDORID && devid == RT_DEVICEID_8139) { 758 if (revid == 0x20) { 759 /* 8139C+, let re(4) take care of this device. */ 760 return (ENXIO); 761 } 762 } 763 t = rl_devs; 764 for (i = 0; i < sizeof(rl_devs) / sizeof(rl_devs[0]); i++, t++) { 765 if (vendor == t->rl_vid && devid == t->rl_did) { 766 device_set_desc(dev, t->rl_name); 767 return (BUS_PROBE_DEFAULT); 768 } 769 } 770 771 return (ENXIO); 772} 773 774struct rl_dmamap_arg { 775 bus_addr_t rl_busaddr; 776}; 777 778static void 779rl_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error) 780{ 781 struct rl_dmamap_arg *ctx; 782 783 if (error != 0) 784 return; 785 786 KASSERT(nsegs == 1, ("%s: %d segments returned!", __func__, nsegs)); 787 788 ctx = (struct rl_dmamap_arg *)arg; 789 ctx->rl_busaddr = segs[0].ds_addr; 790} 791 792/* 793 * Attach the interface. Allocate softc structures, do ifmedia 794 * setup and ethernet/BPF attach. 795 */ 796static int 797rl_attach(device_t dev) 798{ 799 uint8_t eaddr[ETHER_ADDR_LEN]; 800 uint16_t as[3]; 801 struct ifnet *ifp; 802 struct rl_softc *sc; 803 struct rl_type *t; 804 struct sysctl_ctx_list *ctx; 805 struct sysctl_oid_list *children; 806 int error = 0, i, rid; 807 int unit; 808 uint16_t rl_did = 0; 809 char tn[32]; 810 811 sc = device_get_softc(dev); 812 unit = device_get_unit(dev); 813 sc->rl_dev = dev; 814 815 sc->rl_twister_enable = 0; 816 snprintf(tn, sizeof(tn), "dev.rl.%d.twister_enable", unit); 817 TUNABLE_INT_FETCH(tn, &sc->rl_twister_enable); 818 ctx = device_get_sysctl_ctx(sc->rl_dev); 819 children = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->rl_dev)); 820 SYSCTL_ADD_INT(ctx, children, OID_AUTO, "twister_enable", CTLFLAG_RD, 821 &sc->rl_twister_enable, 0, ""); 822 823 mtx_init(&sc->rl_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, 824 MTX_DEF); 825 callout_init_mtx(&sc->rl_stat_callout, &sc->rl_mtx, 0); 826 827 pci_enable_busmaster(dev); 828 829 /* Map control/status registers. */ 830 rid = RL_RID; 831 sc->rl_res = bus_alloc_resource_any(dev, RL_RES, &rid, RF_ACTIVE); 832 833 if (sc->rl_res == NULL) { 834 device_printf(dev, "couldn't map ports/memory\n"); 835 error = ENXIO; 836 goto fail; 837 } 838 839#ifdef notdef 840 /* 841 * Detect the Realtek 8139B. For some reason, this chip is very 842 * unstable when left to autoselect the media 843 * The best workaround is to set the device to the required 844 * media type or to set it to the 10 Meg speed. 845 */ 846 if ((rman_get_end(sc->rl_res) - rman_get_start(sc->rl_res)) == 0xFF) 847 device_printf(dev, 848"Realtek 8139B detected. Warning, this may be unstable in autoselect mode\n"); 849#endif 850 851 sc->rl_btag = rman_get_bustag(sc->rl_res); 852 sc->rl_bhandle = rman_get_bushandle(sc->rl_res); 853 854 /* Allocate interrupt */ 855 rid = 0; 856 sc->rl_irq[0] = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 857 RF_SHAREABLE | RF_ACTIVE); 858 859 if (sc->rl_irq[0] == NULL) { 860 device_printf(dev, "couldn't map interrupt\n"); 861 error = ENXIO; 862 goto fail; 863 } 864 865 /* 866 * Reset the adapter. Only take the lock here as it's needed in 867 * order to call rl_reset(). 868 */ 869 RL_LOCK(sc); 870 rl_reset(sc); 871 RL_UNLOCK(sc); 872 873 sc->rl_eecmd_read = RL_EECMD_READ_6BIT; 874 rl_read_eeprom(sc, (uint8_t *)&rl_did, 0, 1, 0); 875 if (rl_did != 0x8129) 876 sc->rl_eecmd_read = RL_EECMD_READ_8BIT; 877 878 /* 879 * Get station address from the EEPROM. 880 */ 881 rl_read_eeprom(sc, (uint8_t *)as, RL_EE_EADDR, 3, 0); 882 for (i = 0; i < 3; i++) { 883 eaddr[(i * 2) + 0] = as[i] & 0xff; 884 eaddr[(i * 2) + 1] = as[i] >> 8; 885 } 886 887 /* 888 * Now read the exact device type from the EEPROM to find 889 * out if it's an 8129 or 8139. 890 */ 891 rl_read_eeprom(sc, (uint8_t *)&rl_did, RL_EE_PCI_DID, 1, 0); 892 893 t = rl_devs; 894 sc->rl_type = 0; 895 while(t->rl_name != NULL) { 896 if (rl_did == t->rl_did) { 897 sc->rl_type = t->rl_basetype; 898 break; 899 } 900 t++; 901 } 902 903 if (sc->rl_type == 0) { 904 device_printf(dev, "unknown device ID: %x assuming 8139\n", 905 rl_did); 906 sc->rl_type = RL_8139; 907 /* 908 * Read RL_IDR register to get ethernet address as accessing 909 * EEPROM may not extract correct address. 910 */ 911 for (i = 0; i < ETHER_ADDR_LEN; i++) 912 eaddr[i] = CSR_READ_1(sc, RL_IDR0 + i); 913 } 914 915 if ((error = rl_dma_alloc(sc)) != 0) 916 goto fail; 917 918 ifp = sc->rl_ifp = if_alloc(IFT_ETHER); 919 if (ifp == NULL) { 920 device_printf(dev, "can not if_alloc()\n"); 921 error = ENOSPC; 922 goto fail; 923 } 924 925 /* Do MII setup */ 926 if (mii_phy_probe(dev, &sc->rl_miibus, 927 rl_ifmedia_upd, rl_ifmedia_sts)) { 928 device_printf(dev, "MII without any phy!\n"); 929 error = ENXIO; 930 goto fail; 931 } 932 933 ifp->if_softc = sc; 934 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 935 ifp->if_mtu = ETHERMTU; 936 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 937 ifp->if_ioctl = rl_ioctl; 938 ifp->if_start = rl_start; 939 ifp->if_init = rl_init; 940 ifp->if_capabilities = IFCAP_VLAN_MTU; 941 ifp->if_capenable = ifp->if_capabilities; 942#ifdef DEVICE_POLLING 943 ifp->if_capabilities |= IFCAP_POLLING; 944#endif 945 IFQ_SET_MAXLEN(&ifp->if_snd, IFQ_MAXLEN); 946 ifp->if_snd.ifq_drv_maxlen = IFQ_MAXLEN; 947 IFQ_SET_READY(&ifp->if_snd); 948 949 /* 950 * Call MI attach routine. 951 */ 952 ether_ifattach(ifp, eaddr); 953 954 /* Hook interrupt last to avoid having to lock softc */ 955 error = bus_setup_intr(dev, sc->rl_irq[0], INTR_TYPE_NET | INTR_MPSAFE, 956 NULL, rl_intr, sc, &sc->rl_intrhand[0]); 957 if (error) { 958 device_printf(sc->rl_dev, "couldn't set up irq\n"); 959 ether_ifdetach(ifp); 960 } 961 962fail: 963 if (error) 964 rl_detach(dev); 965 966 return (error); 967} 968 969/* 970 * Shutdown hardware and free up resources. This can be called any 971 * time after the mutex has been initialized. It is called in both 972 * the error case in attach and the normal detach case so it needs 973 * to be careful about only freeing resources that have actually been 974 * allocated. 975 */ 976static int 977rl_detach(device_t dev) 978{ 979 struct rl_softc *sc; 980 struct ifnet *ifp; 981 982 sc = device_get_softc(dev); 983 ifp = sc->rl_ifp; 984 985 KASSERT(mtx_initialized(&sc->rl_mtx), ("rl mutex not initialized")); 986 987#ifdef DEVICE_POLLING 988 if (ifp->if_capenable & IFCAP_POLLING) 989 ether_poll_deregister(ifp); 990#endif 991 /* These should only be active if attach succeeded */ 992 if (device_is_attached(dev)) { 993 RL_LOCK(sc); 994 rl_stop(sc); 995 RL_UNLOCK(sc); 996 callout_drain(&sc->rl_stat_callout); 997 ether_ifdetach(ifp); 998 } 999#if 0 1000 sc->suspended = 1; 1001#endif 1002 if (sc->rl_miibus) 1003 device_delete_child(dev, sc->rl_miibus); 1004 bus_generic_detach(dev); 1005 1006 if (sc->rl_intrhand[0]) 1007 bus_teardown_intr(dev, sc->rl_irq[0], sc->rl_intrhand[0]); 1008 if (sc->rl_irq[0]) 1009 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->rl_irq[0]); 1010 if (sc->rl_res) 1011 bus_release_resource(dev, RL_RES, RL_RID, sc->rl_res); 1012 1013 if (ifp) 1014 if_free(ifp); 1015 1016 rl_dma_free(sc); 1017 1018 mtx_destroy(&sc->rl_mtx); 1019 1020 return (0); 1021} 1022 1023static int 1024rl_dma_alloc(struct rl_softc *sc) 1025{ 1026 struct rl_dmamap_arg ctx; 1027 int error, i; 1028 1029 /* 1030 * Allocate the parent bus DMA tag appropriate for PCI. 1031 */ 1032 error = bus_dma_tag_create(bus_get_dma_tag(sc->rl_dev), /* parent */ 1033 1, 0, /* alignment, boundary */ 1034 BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ 1035 BUS_SPACE_MAXADDR, /* highaddr */ 1036 NULL, NULL, /* filter, filterarg */ 1037 BUS_SPACE_MAXSIZE_32BIT, 0, /* maxsize, nsegments */ 1038 BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ 1039 0, /* flags */ 1040 NULL, NULL, /* lockfunc, lockarg */ 1041 &sc->rl_parent_tag); 1042 if (error) { 1043 device_printf(sc->rl_dev, 1044 "failed to create parent DMA tag.\n"); 1045 goto fail; 1046 } 1047 /* Create DMA tag for Rx memory block. */ 1048 error = bus_dma_tag_create(sc->rl_parent_tag, /* parent */ 1049 RL_RX_8139_BUF_ALIGN, 0, /* alignment, boundary */ 1050 BUS_SPACE_MAXADDR, /* lowaddr */ 1051 BUS_SPACE_MAXADDR, /* highaddr */ 1052 NULL, NULL, /* filter, filterarg */ 1053 RL_RXBUFLEN + RL_RX_8139_BUF_GUARD_SZ, 1, /* maxsize,nsegments */ 1054 RL_RXBUFLEN + RL_RX_8139_BUF_GUARD_SZ, /* maxsegsize */ 1055 0, /* flags */ 1056 NULL, NULL, /* lockfunc, lockarg */ 1057 &sc->rl_cdata.rl_rx_tag); 1058 if (error) { 1059 device_printf(sc->rl_dev, 1060 "failed to create Rx memory block DMA tag.\n"); 1061 goto fail; 1062 } 1063 /* Create DMA tag for Tx buffer. */ 1064 error = bus_dma_tag_create(sc->rl_parent_tag, /* parent */ 1065 RL_TX_8139_BUF_ALIGN, 0, /* alignment, boundary */ 1066 BUS_SPACE_MAXADDR, /* lowaddr */ 1067 BUS_SPACE_MAXADDR, /* highaddr */ 1068 NULL, NULL, /* filter, filterarg */ 1069 MCLBYTES, 1, /* maxsize, nsegments */ 1070 MCLBYTES, /* maxsegsize */ 1071 0, /* flags */ 1072 NULL, NULL, /* lockfunc, lockarg */ 1073 &sc->rl_cdata.rl_tx_tag); 1074 if (error) { 1075 device_printf(sc->rl_dev, "failed to create Tx DMA tag.\n"); 1076 goto fail; 1077 } 1078 1079 /* 1080 * Allocate DMA'able memory and load DMA map for Rx memory block. 1081 */ 1082 error = bus_dmamem_alloc(sc->rl_cdata.rl_rx_tag, 1083 (void **)&sc->rl_cdata.rl_rx_buf, BUS_DMA_WAITOK | 1084 BUS_DMA_COHERENT | BUS_DMA_ZERO, &sc->rl_cdata.rl_rx_dmamap); 1085 if (error != 0) { 1086 device_printf(sc->rl_dev, 1087 "failed to allocate Rx DMA memory block.\n"); 1088 goto fail; 1089 } 1090 ctx.rl_busaddr = 0; 1091 error = bus_dmamap_load(sc->rl_cdata.rl_rx_tag, 1092 sc->rl_cdata.rl_rx_dmamap, sc->rl_cdata.rl_rx_buf, 1093 RL_RXBUFLEN + RL_RX_8139_BUF_GUARD_SZ, rl_dmamap_cb, &ctx, 1094 BUS_DMA_NOWAIT); 1095 if (error != 0 || ctx.rl_busaddr == 0) { 1096 device_printf(sc->rl_dev, 1097 "could not load Rx DMA memory block.\n"); 1098 goto fail; 1099 } 1100 sc->rl_cdata.rl_rx_buf_paddr = ctx.rl_busaddr; 1101 1102 /* Create DMA maps for Tx buffers. */ 1103 for (i = 0; i < RL_TX_LIST_CNT; i++) { 1104 sc->rl_cdata.rl_tx_chain[i] = NULL; 1105 sc->rl_cdata.rl_tx_dmamap[i] = NULL; 1106 error = bus_dmamap_create(sc->rl_cdata.rl_tx_tag, 0, 1107 &sc->rl_cdata.rl_tx_dmamap[i]); 1108 if (error != 0) { 1109 device_printf(sc->rl_dev, 1110 "could not create Tx dmamap.\n"); 1111 goto fail; 1112 } 1113 } 1114 1115 /* Leave a few bytes before the start of the RX ring buffer. */ 1116 sc->rl_cdata.rl_rx_buf_ptr = sc->rl_cdata.rl_rx_buf; 1117 sc->rl_cdata.rl_rx_buf += RL_RX_8139_BUF_RESERVE; 1118 1119fail: 1120 return (error); 1121} 1122 1123static void 1124rl_dma_free(struct rl_softc *sc) 1125{ 1126 int i; 1127 1128 /* Rx memory block. */ 1129 if (sc->rl_cdata.rl_rx_tag != NULL) { 1130 if (sc->rl_cdata.rl_rx_dmamap != NULL) 1131 bus_dmamap_unload(sc->rl_cdata.rl_rx_tag, 1132 sc->rl_cdata.rl_rx_dmamap); 1133 if (sc->rl_cdata.rl_rx_dmamap != NULL && 1134 sc->rl_cdata.rl_rx_buf_ptr != NULL) 1135 bus_dmamem_free(sc->rl_cdata.rl_rx_tag, 1136 sc->rl_cdata.rl_rx_buf_ptr, 1137 sc->rl_cdata.rl_rx_dmamap); 1138 sc->rl_cdata.rl_rx_buf_ptr = NULL; 1139 sc->rl_cdata.rl_rx_buf = NULL; 1140 sc->rl_cdata.rl_rx_dmamap = NULL; 1141 bus_dma_tag_destroy(sc->rl_cdata.rl_rx_tag); 1142 sc->rl_cdata.rl_tx_tag = NULL; 1143 } 1144 1145 /* Tx buffers. */ 1146 if (sc->rl_cdata.rl_tx_tag != NULL) { 1147 for (i = 0; i < RL_TX_LIST_CNT; i++) { 1148 if (sc->rl_cdata.rl_tx_dmamap[i] != NULL) { 1149 bus_dmamap_destroy( 1150 sc->rl_cdata.rl_tx_tag, 1151 sc->rl_cdata.rl_tx_dmamap[i]); 1152 sc->rl_cdata.rl_tx_dmamap[i] = NULL; 1153 } 1154 } 1155 bus_dma_tag_destroy(sc->rl_cdata.rl_tx_tag); 1156 sc->rl_cdata.rl_tx_tag = NULL; 1157 } 1158 1159 if (sc->rl_parent_tag != NULL) { 1160 bus_dma_tag_destroy(sc->rl_parent_tag); 1161 sc->rl_parent_tag = NULL; 1162 } 1163} 1164 1165/* 1166 * Initialize the transmit descriptors. 1167 */ 1168static int 1169rl_list_tx_init(struct rl_softc *sc) 1170{ 1171 struct rl_chain_data *cd; 1172 int i; 1173 1174 RL_LOCK_ASSERT(sc); 1175 1176 cd = &sc->rl_cdata; 1177 for (i = 0; i < RL_TX_LIST_CNT; i++) { 1178 cd->rl_tx_chain[i] = NULL; 1179 CSR_WRITE_4(sc, 1180 RL_TXADDR0 + (i * sizeof(uint32_t)), 0x0000000); 1181 } 1182 1183 sc->rl_cdata.cur_tx = 0; 1184 sc->rl_cdata.last_tx = 0; 1185 1186 return (0); 1187} 1188 1189static int 1190rl_list_rx_init(struct rl_softc *sc) 1191{ 1192 1193 RL_LOCK_ASSERT(sc); 1194 1195 bzero(sc->rl_cdata.rl_rx_buf_ptr, 1196 RL_RXBUFLEN + RL_RX_8139_BUF_GUARD_SZ); 1197 bus_dmamap_sync(sc->rl_cdata.rl_tx_tag, sc->rl_cdata.rl_rx_dmamap, 1198 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 1199 1200 return (0); 1201} 1202 1203/* 1204 * A frame has been uploaded: pass the resulting mbuf chain up to 1205 * the higher level protocols. 1206 * 1207 * You know there's something wrong with a PCI bus-master chip design 1208 * when you have to use m_devget(). 1209 * 1210 * The receive operation is badly documented in the datasheet, so I'll 1211 * attempt to document it here. The driver provides a buffer area and 1212 * places its base address in the RX buffer start address register. 1213 * The chip then begins copying frames into the RX buffer. Each frame 1214 * is preceded by a 32-bit RX status word which specifies the length 1215 * of the frame and certain other status bits. Each frame (starting with 1216 * the status word) is also 32-bit aligned. The frame length is in the 1217 * first 16 bits of the status word; the lower 15 bits correspond with 1218 * the 'rx status register' mentioned in the datasheet. 1219 * 1220 * Note: to make the Alpha happy, the frame payload needs to be aligned 1221 * on a 32-bit boundary. To achieve this, we pass RL_ETHER_ALIGN (2 bytes) 1222 * as the offset argument to m_devget(). 1223 */ 1224static int 1225rl_rxeof(struct rl_softc *sc) 1226{ 1227 struct mbuf *m; 1228 struct ifnet *ifp = sc->rl_ifp; 1229 uint8_t *rxbufpos; 1230 int total_len = 0; 1231 int wrap = 0; 1232 int rx_npkts = 0; 1233 uint32_t rxstat; 1234 uint16_t cur_rx; 1235 uint16_t limit; 1236 uint16_t max_bytes, rx_bytes = 0; 1237 1238 RL_LOCK_ASSERT(sc); 1239 1240 bus_dmamap_sync(sc->rl_cdata.rl_rx_tag, sc->rl_cdata.rl_rx_dmamap, 1241 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 1242 1243 cur_rx = (CSR_READ_2(sc, RL_CURRXADDR) + 16) % RL_RXBUFLEN; 1244 1245 /* Do not try to read past this point. */ 1246 limit = CSR_READ_2(sc, RL_CURRXBUF) % RL_RXBUFLEN; 1247 1248 if (limit < cur_rx) 1249 max_bytes = (RL_RXBUFLEN - cur_rx) + limit; 1250 else 1251 max_bytes = limit - cur_rx; 1252 1253 while((CSR_READ_1(sc, RL_COMMAND) & RL_CMD_EMPTY_RXBUF) == 0) { 1254#ifdef DEVICE_POLLING 1255 if (ifp->if_capenable & IFCAP_POLLING) { 1256 if (sc->rxcycles <= 0) 1257 break; 1258 sc->rxcycles--; 1259 } 1260#endif 1261 rxbufpos = sc->rl_cdata.rl_rx_buf + cur_rx; 1262 rxstat = le32toh(*(uint32_t *)rxbufpos); 1263 1264 /* 1265 * Here's a totally undocumented fact for you. When the 1266 * RealTek chip is in the process of copying a packet into 1267 * RAM for you, the length will be 0xfff0. If you spot a 1268 * packet header with this value, you need to stop. The 1269 * datasheet makes absolutely no mention of this and 1270 * RealTek should be shot for this. 1271 */ 1272 total_len = rxstat >> 16; 1273 if (total_len == RL_RXSTAT_UNFINISHED) 1274 break; 1275 1276 if (!(rxstat & RL_RXSTAT_RXOK) || 1277 total_len < ETHER_MIN_LEN || 1278 total_len > ETHER_MAX_LEN + ETHER_VLAN_ENCAP_LEN) { 1279 ifp->if_ierrors++; 1280 rl_init_locked(sc); 1281 return (rx_npkts); 1282 } 1283 1284 /* No errors; receive the packet. */ 1285 rx_bytes += total_len + 4; 1286 1287 /* 1288 * XXX The RealTek chip includes the CRC with every 1289 * received frame, and there's no way to turn this 1290 * behavior off (at least, I can't find anything in 1291 * the manual that explains how to do it) so we have 1292 * to trim off the CRC manually. 1293 */ 1294 total_len -= ETHER_CRC_LEN; 1295 1296 /* 1297 * Avoid trying to read more bytes than we know 1298 * the chip has prepared for us. 1299 */ 1300 if (rx_bytes > max_bytes) 1301 break; 1302 1303 rxbufpos = sc->rl_cdata.rl_rx_buf + 1304 ((cur_rx + sizeof(uint32_t)) % RL_RXBUFLEN); 1305 if (rxbufpos == (sc->rl_cdata.rl_rx_buf + RL_RXBUFLEN)) 1306 rxbufpos = sc->rl_cdata.rl_rx_buf; 1307 1308 wrap = (sc->rl_cdata.rl_rx_buf + RL_RXBUFLEN) - rxbufpos; 1309 if (total_len > wrap) { 1310 m = m_devget(rxbufpos, total_len, RL_ETHER_ALIGN, ifp, 1311 NULL); 1312 if (m != NULL) 1313 m_copyback(m, wrap, total_len - wrap, 1314 sc->rl_cdata.rl_rx_buf); 1315 cur_rx = (total_len - wrap + ETHER_CRC_LEN); 1316 } else { 1317 m = m_devget(rxbufpos, total_len, RL_ETHER_ALIGN, ifp, 1318 NULL); 1319 cur_rx += total_len + 4 + ETHER_CRC_LEN; 1320 } 1321 1322 /* Round up to 32-bit boundary. */ 1323 cur_rx = (cur_rx + 3) & ~3; 1324 CSR_WRITE_2(sc, RL_CURRXADDR, cur_rx - 16); 1325 1326 if (m == NULL) { 1327 ifp->if_iqdrops++; 1328 continue; 1329 } 1330 1331 ifp->if_ipackets++; 1332 RL_UNLOCK(sc); 1333 (*ifp->if_input)(ifp, m); 1334 RL_LOCK(sc); 1335 rx_npkts++; 1336 } 1337 1338 /* No need to sync Rx memory block as we didn't modify it. */ 1339 return (rx_npkts); 1340} 1341 1342/* 1343 * A frame was downloaded to the chip. It's safe for us to clean up 1344 * the list buffers. 1345 */ 1346static void 1347rl_txeof(struct rl_softc *sc) 1348{ 1349 struct ifnet *ifp = sc->rl_ifp; 1350 uint32_t txstat; 1351 1352 RL_LOCK_ASSERT(sc); 1353 1354 /* 1355 * Go through our tx list and free mbufs for those 1356 * frames that have been uploaded. 1357 */ 1358 do { 1359 if (RL_LAST_TXMBUF(sc) == NULL) 1360 break; 1361 txstat = CSR_READ_4(sc, RL_LAST_TXSTAT(sc)); 1362 if (!(txstat & (RL_TXSTAT_TX_OK| 1363 RL_TXSTAT_TX_UNDERRUN|RL_TXSTAT_TXABRT))) 1364 break; 1365 1366 ifp->if_collisions += (txstat & RL_TXSTAT_COLLCNT) >> 24; 1367 1368 bus_dmamap_sync(sc->rl_cdata.rl_tx_tag, RL_LAST_DMAMAP(sc), 1369 BUS_DMASYNC_POSTWRITE); 1370 bus_dmamap_unload(sc->rl_cdata.rl_tx_tag, RL_LAST_DMAMAP(sc)); 1371 m_freem(RL_LAST_TXMBUF(sc)); 1372 RL_LAST_TXMBUF(sc) = NULL; 1373 /* 1374 * If there was a transmit underrun, bump the TX threshold. 1375 * Make sure not to overflow the 63 * 32byte we can address 1376 * with the 6 available bit. 1377 */ 1378 if ((txstat & RL_TXSTAT_TX_UNDERRUN) && 1379 (sc->rl_txthresh < 2016)) 1380 sc->rl_txthresh += 32; 1381 if (txstat & RL_TXSTAT_TX_OK) 1382 ifp->if_opackets++; 1383 else { 1384 int oldthresh; 1385 ifp->if_oerrors++; 1386 if ((txstat & RL_TXSTAT_TXABRT) || 1387 (txstat & RL_TXSTAT_OUTOFWIN)) 1388 CSR_WRITE_4(sc, RL_TXCFG, RL_TXCFG_CONFIG); 1389 oldthresh = sc->rl_txthresh; 1390 /* error recovery */ 1391 rl_init_locked(sc); 1392 /* restore original threshold */ 1393 sc->rl_txthresh = oldthresh; 1394 return; 1395 } 1396 RL_INC(sc->rl_cdata.last_tx); 1397 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 1398 } while (sc->rl_cdata.last_tx != sc->rl_cdata.cur_tx); 1399 1400 if (RL_LAST_TXMBUF(sc) == NULL) 1401 sc->rl_watchdog_timer = 0; 1402} 1403 1404static void 1405rl_twister_update(struct rl_softc *sc) 1406{ 1407 uint16_t linktest; 1408 /* 1409 * Table provided by RealTek (Kinston <shangh@realtek.com.tw>) for 1410 * Linux driver. Values undocumented otherwise. 1411 */ 1412 static const uint32_t param[4][4] = { 1413 {0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43}, 1414 {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83}, 1415 {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83}, 1416 {0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83} 1417 }; 1418 1419 /* 1420 * Tune the so-called twister registers of the RTL8139. These 1421 * are used to compensate for impedance mismatches. The 1422 * method for tuning these registers is undocumented and the 1423 * following procedure is collected from public sources. 1424 */ 1425 switch (sc->rl_twister) 1426 { 1427 case CHK_LINK: 1428 /* 1429 * If we have a sufficient link, then we can proceed in 1430 * the state machine to the next stage. If not, then 1431 * disable further tuning after writing sane defaults. 1432 */ 1433 if (CSR_READ_2(sc, RL_CSCFG) & RL_CSCFG_LINK_OK) { 1434 CSR_WRITE_2(sc, RL_CSCFG, RL_CSCFG_LINK_DOWN_OFF_CMD); 1435 sc->rl_twister = FIND_ROW; 1436 } else { 1437 CSR_WRITE_2(sc, RL_CSCFG, RL_CSCFG_LINK_DOWN_CMD); 1438 CSR_WRITE_4(sc, RL_NWAYTST, RL_NWAYTST_CBL_TEST); 1439 CSR_WRITE_4(sc, RL_PARA78, RL_PARA78_DEF); 1440 CSR_WRITE_4(sc, RL_PARA7C, RL_PARA7C_DEF); 1441 sc->rl_twister = DONE; 1442 } 1443 break; 1444 case FIND_ROW: 1445 /* 1446 * Read how long it took to see the echo to find the tuning 1447 * row to use. 1448 */ 1449 linktest = CSR_READ_2(sc, RL_CSCFG) & RL_CSCFG_STATUS; 1450 if (linktest == RL_CSCFG_ROW3) 1451 sc->rl_twist_row = 3; 1452 else if (linktest == RL_CSCFG_ROW2) 1453 sc->rl_twist_row = 2; 1454 else if (linktest == RL_CSCFG_ROW1) 1455 sc->rl_twist_row = 1; 1456 else 1457 sc->rl_twist_row = 0; 1458 sc->rl_twist_col = 0; 1459 sc->rl_twister = SET_PARAM; 1460 break; 1461 case SET_PARAM: 1462 if (sc->rl_twist_col == 0) 1463 CSR_WRITE_4(sc, RL_NWAYTST, RL_NWAYTST_RESET); 1464 CSR_WRITE_4(sc, RL_PARA7C, 1465 param[sc->rl_twist_row][sc->rl_twist_col]); 1466 if (++sc->rl_twist_col == 4) { 1467 if (sc->rl_twist_row == 3) 1468 sc->rl_twister = RECHK_LONG; 1469 else 1470 sc->rl_twister = DONE; 1471 } 1472 break; 1473 case RECHK_LONG: 1474 /* 1475 * For long cables, we have to double check to make sure we 1476 * don't mistune. 1477 */ 1478 linktest = CSR_READ_2(sc, RL_CSCFG) & RL_CSCFG_STATUS; 1479 if (linktest == RL_CSCFG_ROW3) 1480 sc->rl_twister = DONE; 1481 else { 1482 CSR_WRITE_4(sc, RL_PARA7C, RL_PARA7C_RETUNE); 1483 sc->rl_twister = RETUNE; 1484 } 1485 break; 1486 case RETUNE: 1487 /* Retune for a shorter cable (try column 2) */ 1488 CSR_WRITE_4(sc, RL_NWAYTST, RL_NWAYTST_CBL_TEST); 1489 CSR_WRITE_4(sc, RL_PARA78, RL_PARA78_DEF); 1490 CSR_WRITE_4(sc, RL_PARA7C, RL_PARA7C_DEF); 1491 CSR_WRITE_4(sc, RL_NWAYTST, RL_NWAYTST_RESET); 1492 sc->rl_twist_row--; 1493 sc->rl_twist_col = 0; 1494 sc->rl_twister = SET_PARAM; 1495 break; 1496 1497 case DONE: 1498 break; 1499 } 1500 1501} 1502 1503static void 1504rl_tick(void *xsc) 1505{ 1506 struct rl_softc *sc = xsc; 1507 struct mii_data *mii; 1508 int ticks; 1509 1510 RL_LOCK_ASSERT(sc); 1511 /* 1512 * If we're doing the twister cable calibration, then we need to defer 1513 * watchdog timeouts. This is a no-op in normal operations, but 1514 * can falsely trigger when the cable calibration takes a while and 1515 * there was traffic ready to go when rl was started. 1516 * 1517 * We don't defer mii_tick since that updates the mii status, which 1518 * helps the twister process, at least according to similar patches 1519 * for the Linux driver I found online while doing the fixes. Worst 1520 * case is a few extra mii reads during calibration. 1521 */ 1522 mii = device_get_softc(sc->rl_miibus); 1523 mii_tick(mii); 1524 if ((sc->rl_flags & RL_FLAG_LINK) == 0) 1525 rl_miibus_statchg(sc->rl_dev); 1526 if (sc->rl_twister_enable) { 1527 if (sc->rl_twister == DONE) 1528 rl_watchdog(sc); 1529 else 1530 rl_twister_update(sc); 1531 if (sc->rl_twister == DONE) 1532 ticks = hz; 1533 else 1534 ticks = hz / 10; 1535 } else { 1536 rl_watchdog(sc); 1537 ticks = hz; 1538 } 1539 1540 callout_reset(&sc->rl_stat_callout, ticks, rl_tick, sc); 1541} 1542 1543#ifdef DEVICE_POLLING 1544static int 1545rl_poll(struct ifnet *ifp, enum poll_cmd cmd, int count) 1546{ 1547 struct rl_softc *sc = ifp->if_softc; 1548 int rx_npkts = 0; 1549 1550 RL_LOCK(sc); 1551 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 1552 rx_npkts = rl_poll_locked(ifp, cmd, count); 1553 RL_UNLOCK(sc); 1554 return (rx_npkts); 1555} 1556 1557static int 1558rl_poll_locked(struct ifnet *ifp, enum poll_cmd cmd, int count) 1559{ 1560 struct rl_softc *sc = ifp->if_softc; 1561 int rx_npkts; 1562 1563 RL_LOCK_ASSERT(sc); 1564 1565 sc->rxcycles = count; 1566 rx_npkts = rl_rxeof(sc); 1567 rl_txeof(sc); 1568 1569 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) 1570 rl_start_locked(ifp); 1571 1572 if (cmd == POLL_AND_CHECK_STATUS) { 1573 uint16_t status; 1574 1575 /* We should also check the status register. */ 1576 status = CSR_READ_2(sc, RL_ISR); 1577 if (status == 0xffff) 1578 return (rx_npkts); 1579 if (status != 0) 1580 CSR_WRITE_2(sc, RL_ISR, status); 1581 1582 /* XXX We should check behaviour on receiver stalls. */ 1583 1584 if (status & RL_ISR_SYSTEM_ERR) 1585 rl_init_locked(sc); 1586 } 1587 return (rx_npkts); 1588} 1589#endif /* DEVICE_POLLING */ 1590 1591static void 1592rl_intr(void *arg) 1593{ 1594 struct rl_softc *sc = arg; 1595 struct ifnet *ifp = sc->rl_ifp; 1596 uint16_t status; 1597 1598 RL_LOCK(sc); 1599 1600 if (sc->suspended) 1601 goto done_locked; 1602 1603#ifdef DEVICE_POLLING 1604 if (ifp->if_capenable & IFCAP_POLLING) 1605 goto done_locked; 1606#endif 1607 1608 for (;;) { 1609 status = CSR_READ_2(sc, RL_ISR); 1610 /* If the card has gone away, the read returns 0xffff. */ 1611 if (status == 0xffff) 1612 break; 1613 if (status != 0) 1614 CSR_WRITE_2(sc, RL_ISR, status); 1615 if ((status & RL_INTRS) == 0) 1616 break; 1617 if (status & RL_ISR_RX_OK) 1618 rl_rxeof(sc); 1619 if (status & RL_ISR_RX_ERR) 1620 rl_rxeof(sc); 1621 if ((status & RL_ISR_TX_OK) || (status & RL_ISR_TX_ERR)) 1622 rl_txeof(sc); 1623 if (status & RL_ISR_SYSTEM_ERR) 1624 rl_init_locked(sc); 1625 } 1626 1627 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) 1628 rl_start_locked(ifp); 1629 1630done_locked: 1631 RL_UNLOCK(sc); 1632} 1633 1634/* 1635 * Encapsulate an mbuf chain in a descriptor by coupling the mbuf data 1636 * pointers to the fragment pointers. 1637 */ 1638static int 1639rl_encap(struct rl_softc *sc, struct mbuf **m_head) 1640{ 1641 struct mbuf *m; 1642 bus_dma_segment_t txsegs[1]; 1643 int error, nsegs, padlen; 1644 1645 RL_LOCK_ASSERT(sc); 1646 1647 m = *m_head; 1648 padlen = 0; 1649 /* 1650 * Hardware doesn't auto-pad, so we have to make sure 1651 * pad short frames out to the minimum frame length. 1652 */ 1653 if (m->m_pkthdr.len < RL_MIN_FRAMELEN) 1654 padlen = RL_MIN_FRAMELEN - m->m_pkthdr.len; 1655 /* 1656 * The RealTek is brain damaged and wants longword-aligned 1657 * TX buffers, plus we can only have one fragment buffer 1658 * per packet. We have to copy pretty much all the time. 1659 */ 1660 if (m->m_next != NULL || (mtod(m, uintptr_t) & 3) != 0 || 1661 (padlen > 0 && M_TRAILINGSPACE(m) < padlen)) { 1662 m = m_defrag(*m_head, M_DONTWAIT); 1663 if (m == NULL) { 1664 m_freem(*m_head); 1665 *m_head = NULL; 1666 return (ENOMEM); 1667 } 1668 } 1669 *m_head = m; 1670 1671 if (padlen > 0) { 1672 /* 1673 * Make security-conscious people happy: zero out the 1674 * bytes in the pad area, since we don't know what 1675 * this mbuf cluster buffer's previous user might 1676 * have left in it. 1677 */ 1678 bzero(mtod(m, char *) + m->m_pkthdr.len, padlen); 1679 m->m_pkthdr.len += padlen; 1680 m->m_len = m->m_pkthdr.len; 1681 } 1682 1683 error = bus_dmamap_load_mbuf_sg(sc->rl_cdata.rl_tx_tag, 1684 RL_CUR_DMAMAP(sc), m, txsegs, &nsegs, 0); 1685 if (error != 0) 1686 return (error); 1687 if (nsegs == 0) { 1688 m_freem(*m_head); 1689 *m_head = NULL; 1690 return (EIO); 1691 } 1692 1693 RL_CUR_TXMBUF(sc) = m; 1694 bus_dmamap_sync(sc->rl_cdata.rl_tx_tag, RL_CUR_DMAMAP(sc), 1695 BUS_DMASYNC_PREWRITE); 1696 CSR_WRITE_4(sc, RL_CUR_TXADDR(sc), RL_ADDR_LO(txsegs[0].ds_addr)); 1697 1698 return (0); 1699} 1700 1701/* 1702 * Main transmit routine. 1703 */ 1704static void 1705rl_start(struct ifnet *ifp) 1706{ 1707 struct rl_softc *sc = ifp->if_softc; 1708 1709 RL_LOCK(sc); 1710 rl_start_locked(ifp); 1711 RL_UNLOCK(sc); 1712} 1713 1714static void 1715rl_start_locked(struct ifnet *ifp) 1716{ 1717 struct rl_softc *sc = ifp->if_softc; 1718 struct mbuf *m_head = NULL; 1719 1720 RL_LOCK_ASSERT(sc); 1721 1722 if ((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) != 1723 IFF_DRV_RUNNING || (sc->rl_flags & RL_FLAG_LINK) == 0) 1724 return; 1725 1726 while (RL_CUR_TXMBUF(sc) == NULL) { 1727 1728 IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head); 1729 1730 if (m_head == NULL) 1731 break; 1732 1733 if (rl_encap(sc, &m_head)) { 1734 if (m_head == NULL) 1735 break; 1736 IFQ_DRV_PREPEND(&ifp->if_snd, m_head); 1737 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 1738 break; 1739 } 1740 1741 /* Pass a copy of this mbuf chain to the bpf subsystem. */ 1742 BPF_MTAP(ifp, RL_CUR_TXMBUF(sc)); 1743 1744 /* Transmit the frame. */ 1745 CSR_WRITE_4(sc, RL_CUR_TXSTAT(sc), 1746 RL_TXTHRESH(sc->rl_txthresh) | 1747 RL_CUR_TXMBUF(sc)->m_pkthdr.len); 1748 1749 RL_INC(sc->rl_cdata.cur_tx); 1750 1751 /* Set a timeout in case the chip goes out to lunch. */ 1752 sc->rl_watchdog_timer = 5; 1753 } 1754 1755 /* 1756 * We broke out of the loop because all our TX slots are 1757 * full. Mark the NIC as busy until it drains some of the 1758 * packets from the queue. 1759 */ 1760 if (RL_CUR_TXMBUF(sc) != NULL) 1761 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 1762} 1763 1764static void 1765rl_init(void *xsc) 1766{ 1767 struct rl_softc *sc = xsc; 1768 1769 RL_LOCK(sc); 1770 rl_init_locked(sc); 1771 RL_UNLOCK(sc); 1772} 1773 1774static void 1775rl_init_locked(struct rl_softc *sc) 1776{ 1777 struct ifnet *ifp = sc->rl_ifp; 1778 struct mii_data *mii; 1779 uint32_t rxcfg = 0; 1780 uint32_t eaddr[2]; 1781 1782 RL_LOCK_ASSERT(sc); 1783 1784 mii = device_get_softc(sc->rl_miibus); 1785 1786 /* 1787 * Cancel pending I/O and free all RX/TX buffers. 1788 */ 1789 rl_stop(sc); 1790 1791 rl_reset(sc); 1792 if (sc->rl_twister_enable) { 1793 /* 1794 * Reset twister register tuning state. The twister 1795 * registers and their tuning are undocumented, but 1796 * are necessary to cope with bad links. rl_twister = 1797 * DONE here will disable this entirely. 1798 */ 1799 sc->rl_twister = CHK_LINK; 1800 } 1801 1802 /* 1803 * Init our MAC address. Even though the chipset 1804 * documentation doesn't mention it, we need to enter "Config 1805 * register write enable" mode to modify the ID registers. 1806 */ 1807 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_WRITECFG); 1808 bzero(eaddr, sizeof(eaddr)); 1809 bcopy(IF_LLADDR(sc->rl_ifp), eaddr, ETHER_ADDR_LEN); 1810 CSR_WRITE_STREAM_4(sc, RL_IDR0, eaddr[0]); 1811 CSR_WRITE_STREAM_4(sc, RL_IDR4, eaddr[1]); 1812 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); 1813 1814 /* Init the RX memory block pointer register. */ 1815 CSR_WRITE_4(sc, RL_RXADDR, sc->rl_cdata.rl_rx_buf_paddr + 1816 RL_RX_8139_BUF_RESERVE); 1817 /* Init TX descriptors. */ 1818 rl_list_tx_init(sc); 1819 /* Init Rx memory block. */ 1820 rl_list_rx_init(sc); 1821 1822 /* 1823 * Enable transmit and receive. 1824 */ 1825 CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_TX_ENB|RL_CMD_RX_ENB); 1826 1827 /* 1828 * Set the initial TX and RX configuration. 1829 */ 1830 CSR_WRITE_4(sc, RL_TXCFG, RL_TXCFG_CONFIG); 1831 CSR_WRITE_4(sc, RL_RXCFG, RL_RXCFG_CONFIG); 1832 1833 /* Set the individual bit to receive frames for this host only. */ 1834 rxcfg = CSR_READ_4(sc, RL_RXCFG); 1835 rxcfg |= RL_RXCFG_RX_INDIV; 1836 1837 /* If we want promiscuous mode, set the allframes bit. */ 1838 if (ifp->if_flags & IFF_PROMISC) { 1839 rxcfg |= RL_RXCFG_RX_ALLPHYS; 1840 CSR_WRITE_4(sc, RL_RXCFG, rxcfg); 1841 } else { 1842 rxcfg &= ~RL_RXCFG_RX_ALLPHYS; 1843 CSR_WRITE_4(sc, RL_RXCFG, rxcfg); 1844 } 1845 1846 /* Set capture broadcast bit to capture broadcast frames. */ 1847 if (ifp->if_flags & IFF_BROADCAST) { 1848 rxcfg |= RL_RXCFG_RX_BROAD; 1849 CSR_WRITE_4(sc, RL_RXCFG, rxcfg); 1850 } else { 1851 rxcfg &= ~RL_RXCFG_RX_BROAD; 1852 CSR_WRITE_4(sc, RL_RXCFG, rxcfg); 1853 } 1854 1855 /* Program the multicast filter, if necessary. */ 1856 rl_setmulti(sc); 1857 1858#ifdef DEVICE_POLLING 1859 /* Disable interrupts if we are polling. */ 1860 if (ifp->if_capenable & IFCAP_POLLING) 1861 CSR_WRITE_2(sc, RL_IMR, 0); 1862 else 1863#endif 1864 /* Enable interrupts. */ 1865 CSR_WRITE_2(sc, RL_IMR, RL_INTRS); 1866 1867 /* Set initial TX threshold */ 1868 sc->rl_txthresh = RL_TX_THRESH_INIT; 1869 1870 /* Start RX/TX process. */ 1871 CSR_WRITE_4(sc, RL_MISSEDPKT, 0); 1872 1873 /* Enable receiver and transmitter. */ 1874 CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_TX_ENB|RL_CMD_RX_ENB); 1875 1876 sc->rl_flags &= ~RL_FLAG_LINK; 1877 mii_mediachg(mii); 1878 1879 CSR_WRITE_1(sc, RL_CFG1, RL_CFG1_DRVLOAD|RL_CFG1_FULLDUPLEX); 1880 1881 ifp->if_drv_flags |= IFF_DRV_RUNNING; 1882 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 1883 1884 callout_reset(&sc->rl_stat_callout, hz, rl_tick, sc); 1885} 1886 1887/* 1888 * Set media options. 1889 */ 1890static int 1891rl_ifmedia_upd(struct ifnet *ifp) 1892{ 1893 struct rl_softc *sc = ifp->if_softc; 1894 struct mii_data *mii; 1895 1896 mii = device_get_softc(sc->rl_miibus); 1897 1898 RL_LOCK(sc); 1899 mii_mediachg(mii); 1900 RL_UNLOCK(sc); 1901 1902 return (0); 1903} 1904 1905/* 1906 * Report current media status. 1907 */ 1908static void 1909rl_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) 1910{ 1911 struct rl_softc *sc = ifp->if_softc; 1912 struct mii_data *mii; 1913 1914 mii = device_get_softc(sc->rl_miibus); 1915 1916 RL_LOCK(sc); 1917 mii_pollstat(mii); 1918 RL_UNLOCK(sc); 1919 ifmr->ifm_active = mii->mii_media_active; 1920 ifmr->ifm_status = mii->mii_media_status; 1921} 1922 1923static int 1924rl_ioctl(struct ifnet *ifp, u_long command, caddr_t data) 1925{ 1926 struct ifreq *ifr = (struct ifreq *)data; 1927 struct mii_data *mii; 1928 struct rl_softc *sc = ifp->if_softc; 1929 int error = 0; 1930 1931 switch (command) { 1932 case SIOCSIFFLAGS: 1933 RL_LOCK(sc); 1934 if (ifp->if_flags & IFF_UP) { 1935 rl_init_locked(sc); 1936 } else { 1937 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 1938 rl_stop(sc); 1939 } 1940 RL_UNLOCK(sc); 1941 error = 0; 1942 break; 1943 case SIOCADDMULTI: 1944 case SIOCDELMULTI: 1945 RL_LOCK(sc); 1946 rl_setmulti(sc); 1947 RL_UNLOCK(sc); 1948 error = 0; 1949 break; 1950 case SIOCGIFMEDIA: 1951 case SIOCSIFMEDIA: 1952 mii = device_get_softc(sc->rl_miibus); 1953 error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); 1954 break; 1955 case SIOCSIFCAP: 1956#ifdef DEVICE_POLLING 1957 if (ifr->ifr_reqcap & IFCAP_POLLING && 1958 !(ifp->if_capenable & IFCAP_POLLING)) { 1959 error = ether_poll_register(rl_poll, ifp); 1960 if (error) 1961 return(error); 1962 RL_LOCK(sc); 1963 /* Disable interrupts */ 1964 CSR_WRITE_2(sc, RL_IMR, 0x0000); 1965 ifp->if_capenable |= IFCAP_POLLING; 1966 RL_UNLOCK(sc); 1967 return (error); 1968 1969 } 1970 if (!(ifr->ifr_reqcap & IFCAP_POLLING) && 1971 ifp->if_capenable & IFCAP_POLLING) { 1972 error = ether_poll_deregister(ifp); 1973 /* Enable interrupts. */ 1974 RL_LOCK(sc); 1975 CSR_WRITE_2(sc, RL_IMR, RL_INTRS); 1976 ifp->if_capenable &= ~IFCAP_POLLING; 1977 RL_UNLOCK(sc); 1978 return (error); 1979 } 1980#endif /* DEVICE_POLLING */ 1981 break; 1982 default: 1983 error = ether_ioctl(ifp, command, data); 1984 break; 1985 } 1986 1987 return (error); 1988} 1989 1990static void 1991rl_watchdog(struct rl_softc *sc) 1992{ 1993 1994 RL_LOCK_ASSERT(sc); 1995 1996 if (sc->rl_watchdog_timer == 0 || --sc->rl_watchdog_timer >0) 1997 return; 1998 1999 device_printf(sc->rl_dev, "watchdog timeout\n"); 2000 sc->rl_ifp->if_oerrors++; 2001 2002 rl_txeof(sc); 2003 rl_rxeof(sc); 2004 rl_init_locked(sc); 2005} 2006 2007/* 2008 * Stop the adapter and free any mbufs allocated to the 2009 * RX and TX lists. 2010 */ 2011static void 2012rl_stop(struct rl_softc *sc) 2013{ 2014 register int i; 2015 struct ifnet *ifp = sc->rl_ifp; 2016 2017 RL_LOCK_ASSERT(sc); 2018 2019 sc->rl_watchdog_timer = 0; 2020 callout_stop(&sc->rl_stat_callout); 2021 ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); 2022 sc->rl_flags &= ~RL_FLAG_LINK; 2023 2024 CSR_WRITE_1(sc, RL_COMMAND, 0x00); 2025 CSR_WRITE_2(sc, RL_IMR, 0x0000); 2026 for (i = 0; i < RL_TIMEOUT; i++) { 2027 DELAY(10); 2028 if ((CSR_READ_1(sc, RL_COMMAND) & 2029 (RL_CMD_RX_ENB | RL_CMD_TX_ENB)) == 0) 2030 break; 2031 } 2032 if (i == RL_TIMEOUT) 2033 device_printf(sc->rl_dev, "Unable to stop Tx/Rx MAC\n"); 2034 2035 /* 2036 * Free the TX list buffers. 2037 */ 2038 for (i = 0; i < RL_TX_LIST_CNT; i++) { 2039 if (sc->rl_cdata.rl_tx_chain[i] != NULL) { 2040 if (sc->rl_cdata.rl_tx_chain[i] != NULL) { 2041 bus_dmamap_sync(sc->rl_cdata.rl_tx_tag, 2042 sc->rl_cdata.rl_tx_dmamap[i], 2043 BUS_DMASYNC_POSTWRITE); 2044 bus_dmamap_unload(sc->rl_cdata.rl_tx_tag, 2045 sc->rl_cdata.rl_tx_dmamap[i]); 2046 m_freem(sc->rl_cdata.rl_tx_chain[i]); 2047 sc->rl_cdata.rl_tx_chain[i] = NULL; 2048 } 2049 CSR_WRITE_4(sc, RL_TXADDR0 + (i * sizeof(uint32_t)), 2050 0x0000000); 2051 } 2052 } 2053} 2054 2055/* 2056 * Device suspend routine. Stop the interface and save some PCI 2057 * settings in case the BIOS doesn't restore them properly on 2058 * resume. 2059 */ 2060static int 2061rl_suspend(device_t dev) 2062{ 2063 struct rl_softc *sc; 2064 2065 sc = device_get_softc(dev); 2066 2067 RL_LOCK(sc); 2068 rl_stop(sc); 2069 sc->suspended = 1; 2070 RL_UNLOCK(sc); 2071 2072 return (0); 2073} 2074 2075/* 2076 * Device resume routine. Restore some PCI settings in case the BIOS 2077 * doesn't, re-enable busmastering, and restart the interface if 2078 * appropriate. 2079 */ 2080static int 2081rl_resume(device_t dev) 2082{ 2083 struct rl_softc *sc; 2084 struct ifnet *ifp; 2085 2086 sc = device_get_softc(dev); 2087 ifp = sc->rl_ifp; 2088 2089 RL_LOCK(sc); 2090 2091 /* reinitialize interface if necessary */ 2092 if (ifp->if_flags & IFF_UP) 2093 rl_init_locked(sc); 2094 2095 sc->suspended = 0; 2096 2097 RL_UNLOCK(sc); 2098 2099 return (0); 2100} 2101 2102/* 2103 * Stop all chip I/O so that the kernel's probe routines don't 2104 * get confused by errant DMAs when rebooting. 2105 */ 2106static int 2107rl_shutdown(device_t dev) 2108{ 2109 struct rl_softc *sc; 2110 2111 sc = device_get_softc(dev); 2112 2113 RL_LOCK(sc); 2114 rl_stop(sc); 2115 RL_UNLOCK(sc); 2116 2117 return (0); 2118} 2119