if_rl.c revision 142407
1/*- 2 * Copyright (c) 1997, 1998 3 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33#include <sys/cdefs.h> 34__FBSDID("$FreeBSD: head/sys/pci/if_rl.c 142407 2005-02-24 22:33:05Z imp $"); 35 36/* 37 * RealTek 8129/8139 PCI NIC driver 38 * 39 * Supports several extremely cheap PCI 10/100 adapters based on 40 * the RealTek chipset. Datasheets can be obtained from 41 * www.realtek.com.tw. 42 * 43 * Written by Bill Paul <wpaul@ctr.columbia.edu> 44 * Electrical Engineering Department 45 * Columbia University, New York City 46 */ 47/* 48 * The RealTek 8139 PCI NIC redefines the meaning of 'low end.' This is 49 * probably the worst PCI ethernet controller ever made, with the possible 50 * exception of the FEAST chip made by SMC. The 8139 supports bus-master 51 * DMA, but it has a terrible interface that nullifies any performance 52 * gains that bus-master DMA usually offers. 53 * 54 * For transmission, the chip offers a series of four TX descriptor 55 * registers. Each transmit frame must be in a contiguous buffer, aligned 56 * on a longword (32-bit) boundary. This means we almost always have to 57 * do mbuf copies in order to transmit a frame, except in the unlikely 58 * case where a) the packet fits into a single mbuf, and b) the packet 59 * is 32-bit aligned within the mbuf's data area. The presence of only 60 * four descriptor registers means that we can never have more than four 61 * packets queued for transmission at any one time. 62 * 63 * Reception is not much better. The driver has to allocate a single large 64 * buffer area (up to 64K in size) into which the chip will DMA received 65 * frames. Because we don't know where within this region received packets 66 * will begin or end, we have no choice but to copy data from the buffer 67 * area into mbufs in order to pass the packets up to the higher protocol 68 * levels. 69 * 70 * It's impossible given this rotten design to really achieve decent 71 * performance at 100Mbps, unless you happen to have a 400Mhz PII or 72 * some equally overmuscled CPU to drive it. 73 * 74 * On the bright side, the 8139 does have a built-in PHY, although 75 * rather than using an MDIO serial interface like most other NICs, the 76 * PHY registers are directly accessible through the 8139's register 77 * space. The 8139 supports autonegotiation, as well as a 64-bit multicast 78 * filter. 79 * 80 * The 8129 chip is an older version of the 8139 that uses an external PHY 81 * chip. The 8129 has a serial MDIO interface for accessing the MII where 82 * the 8139 lets you directly access the on-board PHY registers. We need 83 * to select which interface to use depending on the chip type. 84 */ 85 86#include <sys/param.h> 87#include <sys/endian.h> 88#include <sys/systm.h> 89#include <sys/sockio.h> 90#include <sys/mbuf.h> 91#include <sys/malloc.h> 92#include <sys/kernel.h> 93#include <sys/module.h> 94#include <sys/socket.h> 95 96#include <net/if.h> 97#include <net/if_arp.h> 98#include <net/ethernet.h> 99#include <net/if_dl.h> 100#include <net/if_media.h> 101 102#include <net/bpf.h> 103 104#include <machine/bus_pio.h> 105#include <machine/bus_memio.h> 106#include <machine/bus.h> 107#include <machine/resource.h> 108#include <sys/bus.h> 109#include <sys/rman.h> 110 111#include <dev/mii/mii.h> 112#include <dev/mii/miivar.h> 113 114#include <dev/pci/pcireg.h> 115#include <dev/pci/pcivar.h> 116 117MODULE_DEPEND(rl, pci, 1, 1, 1); 118MODULE_DEPEND(rl, ether, 1, 1, 1); 119MODULE_DEPEND(rl, miibus, 1, 1, 1); 120 121/* "controller miibus0" required. See GENERIC if you get errors here. */ 122#include "miibus_if.h" 123 124/* 125 * Default to using PIO access for this driver. On SMP systems, 126 * there appear to be problems with memory mapped mode: it looks like 127 * doing too many memory mapped access back to back in rapid succession 128 * can hang the bus. I'm inclined to blame this on crummy design/construction 129 * on the part of RealTek. Memory mapped mode does appear to work on 130 * uniprocessor systems though. 131 */ 132#define RL_USEIOSPACE 133 134#include <pci/if_rlreg.h> 135 136/* 137 * Various supported device vendors/types and their names. 138 */ 139static struct rl_type rl_devs[] = { 140 { RT_VENDORID, RT_DEVICEID_8129, RL_8129, 141 "RealTek 8129 10/100BaseTX" }, 142 { RT_VENDORID, RT_DEVICEID_8139, RL_8139, 143 "RealTek 8139 10/100BaseTX" }, 144 { RT_VENDORID, RT_DEVICEID_8138, RL_8139, 145 "RealTek 8139 10/100BaseTX CardBus" }, 146 { RT_VENDORID, RT_DEVICEID_8100, RL_8139, 147 "RealTek 8100 10/100BaseTX" }, 148 { ACCTON_VENDORID, ACCTON_DEVICEID_5030, RL_8139, 149 "Accton MPX 5030/5038 10/100BaseTX" }, 150 { DELTA_VENDORID, DELTA_DEVICEID_8139, RL_8139, 151 "Delta Electronics 8139 10/100BaseTX" }, 152 { ADDTRON_VENDORID, ADDTRON_DEVICEID_8139, RL_8139, 153 "Addtron Technolgy 8139 10/100BaseTX" }, 154 { DLINK_VENDORID, DLINK_DEVICEID_530TXPLUS, RL_8139, 155 "D-Link DFE-530TX+ 10/100BaseTX" }, 156 { DLINK_VENDORID, DLINK_DEVICEID_690TXD, RL_8139, 157 "D-Link DFE-690TXD 10/100BaseTX" }, 158 { NORTEL_VENDORID, ACCTON_DEVICEID_5030, RL_8139, 159 "Nortel Networks 10/100BaseTX" }, 160 { COREGA_VENDORID, COREGA_DEVICEID_FETHERCBTXD, RL_8139, 161 "Corega FEther CB-TXD" }, 162 { COREGA_VENDORID, COREGA_DEVICEID_FETHERIICBTXD, RL_8139, 163 "Corega FEtherII CB-TXD" }, 164 { PEPPERCON_VENDORID, PEPPERCON_DEVICEID_ROLF, RL_8139, 165 "Peppercon AG ROL-F" }, 166 { PLANEX_VENDORID, PLANEX_DEVICEID_FNW3800TX, RL_8139, 167 "Planex FNW-3800-TX" }, 168 { CP_VENDORID, RT_DEVICEID_8139, RL_8139, 169 "Compaq HNE-300" }, 170 { LEVEL1_VENDORID, LEVEL1_DEVICEID_FPC0106TX, RL_8139, 171 "LevelOne FPC-0106TX" }, 172 { EDIMAX_VENDORID, EDIMAX_DEVICEID_EP4103DL, RL_8139, 173 "Edimax EP-4103DL CardBus" }, 174 { 0, 0, 0, NULL } 175}; 176 177static int rl_attach(device_t); 178static int rl_detach(device_t); 179static void rl_dma_map_rxbuf(void *, bus_dma_segment_t *, int, int); 180static void rl_dma_map_txbuf(void *, bus_dma_segment_t *, int, int); 181static void rl_eeprom_putbyte(struct rl_softc *, int); 182static void rl_eeprom_getword(struct rl_softc *, int, uint16_t *); 183static int rl_encap(struct rl_softc *, struct mbuf * ); 184static int rl_list_tx_init(struct rl_softc *); 185static int rl_ifmedia_upd(struct ifnet *); 186static void rl_ifmedia_sts(struct ifnet *, struct ifmediareq *); 187static int rl_ioctl(struct ifnet *, u_long, caddr_t); 188static void rl_intr(void *); 189static void rl_init(void *); 190static void rl_init_locked(struct rl_softc *sc); 191static void rl_mii_send(struct rl_softc *, uint32_t, int); 192static void rl_mii_sync(struct rl_softc *); 193static int rl_mii_readreg(struct rl_softc *, struct rl_mii_frame *); 194static int rl_mii_writereg(struct rl_softc *, struct rl_mii_frame *); 195static int rl_miibus_readreg(device_t, int, int); 196static void rl_miibus_statchg(device_t); 197static int rl_miibus_writereg(device_t, int, int, int); 198#ifdef DEVICE_POLLING 199static void rl_poll(struct ifnet *ifp, enum poll_cmd cmd, 200 int count); 201static void rl_poll_locked(struct ifnet *ifp, enum poll_cmd cmd, 202 int count); 203#endif 204static int rl_probe(device_t); 205static void rl_read_eeprom(struct rl_softc *, uint8_t *, int, int, int); 206static void rl_reset(struct rl_softc *); 207static int rl_resume(device_t); 208static void rl_rxeof(struct rl_softc *); 209static void rl_setmulti(struct rl_softc *); 210static void rl_shutdown(device_t); 211static void rl_start(struct ifnet *); 212static void rl_start_locked(struct ifnet *); 213static void rl_stop(struct rl_softc *); 214static int rl_suspend(device_t); 215static void rl_tick(void *); 216static void rl_txeof(struct rl_softc *); 217static void rl_watchdog(struct ifnet *); 218 219#ifdef RL_USEIOSPACE 220#define RL_RES SYS_RES_IOPORT 221#define RL_RID RL_PCI_LOIO 222#else 223#define RL_RES SYS_RES_MEMORY 224#define RL_RID RL_PCI_LOMEM 225#endif 226 227static device_method_t rl_methods[] = { 228 /* Device interface */ 229 DEVMETHOD(device_probe, rl_probe), 230 DEVMETHOD(device_attach, rl_attach), 231 DEVMETHOD(device_detach, rl_detach), 232 DEVMETHOD(device_suspend, rl_suspend), 233 DEVMETHOD(device_resume, rl_resume), 234 DEVMETHOD(device_shutdown, rl_shutdown), 235 236 /* bus interface */ 237 DEVMETHOD(bus_print_child, bus_generic_print_child), 238 DEVMETHOD(bus_driver_added, bus_generic_driver_added), 239 240 /* MII interface */ 241 DEVMETHOD(miibus_readreg, rl_miibus_readreg), 242 DEVMETHOD(miibus_writereg, rl_miibus_writereg), 243 DEVMETHOD(miibus_statchg, rl_miibus_statchg), 244 245 { 0, 0 } 246}; 247 248static driver_t rl_driver = { 249 "rl", 250 rl_methods, 251 sizeof(struct rl_softc) 252}; 253 254static devclass_t rl_devclass; 255 256DRIVER_MODULE(rl, pci, rl_driver, rl_devclass, 0, 0); 257DRIVER_MODULE(rl, cardbus, rl_driver, rl_devclass, 0, 0); 258DRIVER_MODULE(miibus, rl, miibus_driver, miibus_devclass, 0, 0); 259 260#define EE_SET(x) \ 261 CSR_WRITE_1(sc, RL_EECMD, \ 262 CSR_READ_1(sc, RL_EECMD) | x) 263 264#define EE_CLR(x) \ 265 CSR_WRITE_1(sc, RL_EECMD, \ 266 CSR_READ_1(sc, RL_EECMD) & ~x) 267 268static void 269rl_dma_map_rxbuf(void *arg, bus_dma_segment_t *segs, int nseg, int error) 270{ 271 struct rl_softc *sc = arg; 272 273 CSR_WRITE_4(sc, RL_RXADDR, segs->ds_addr & 0xFFFFFFFF); 274} 275 276static void 277rl_dma_map_txbuf(void *arg, bus_dma_segment_t *segs, int nseg, int error) 278{ 279 struct rl_softc *sc = arg; 280 281 CSR_WRITE_4(sc, RL_CUR_TXADDR(sc), segs->ds_addr & 0xFFFFFFFF); 282} 283 284/* 285 * Send a read command and address to the EEPROM, check for ACK. 286 */ 287static void 288rl_eeprom_putbyte(struct rl_softc *sc, int addr) 289{ 290 register int d, i; 291 292 d = addr | sc->rl_eecmd_read; 293 294 /* 295 * Feed in each bit and strobe the clock. 296 */ 297 for (i = 0x400; i; i >>= 1) { 298 if (d & i) { 299 EE_SET(RL_EE_DATAIN); 300 } else { 301 EE_CLR(RL_EE_DATAIN); 302 } 303 DELAY(100); 304 EE_SET(RL_EE_CLK); 305 DELAY(150); 306 EE_CLR(RL_EE_CLK); 307 DELAY(100); 308 } 309} 310 311/* 312 * Read a word of data stored in the EEPROM at address 'addr.' 313 */ 314static void 315rl_eeprom_getword(struct rl_softc *sc, int addr, uint16_t *dest) 316{ 317 register int i; 318 uint16_t word = 0; 319 320 /* Enter EEPROM access mode. */ 321 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_PROGRAM|RL_EE_SEL); 322 323 /* 324 * Send address of word we want to read. 325 */ 326 rl_eeprom_putbyte(sc, addr); 327 328 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_PROGRAM|RL_EE_SEL); 329 330 /* 331 * Start reading bits from EEPROM. 332 */ 333 for (i = 0x8000; i; i >>= 1) { 334 EE_SET(RL_EE_CLK); 335 DELAY(100); 336 if (CSR_READ_1(sc, RL_EECMD) & RL_EE_DATAOUT) 337 word |= i; 338 EE_CLR(RL_EE_CLK); 339 DELAY(100); 340 } 341 342 /* Turn off EEPROM access mode. */ 343 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); 344 345 *dest = word; 346} 347 348/* 349 * Read a sequence of words from the EEPROM. 350 */ 351static void 352rl_read_eeprom(struct rl_softc *sc, uint8_t *dest, int off, int cnt, int swap) 353{ 354 int i; 355 uint16_t word = 0, *ptr; 356 357 for (i = 0; i < cnt; i++) { 358 rl_eeprom_getword(sc, off + i, &word); 359 ptr = (uint16_t *)(dest + (i * 2)); 360 if (swap) 361 *ptr = ntohs(word); 362 else 363 *ptr = word; 364 } 365} 366 367/* 368 * MII access routines are provided for the 8129, which 369 * doesn't have a built-in PHY. For the 8139, we fake things 370 * up by diverting rl_phy_readreg()/rl_phy_writereg() to the 371 * direct access PHY registers. 372 */ 373#define MII_SET(x) \ 374 CSR_WRITE_1(sc, RL_MII, \ 375 CSR_READ_1(sc, RL_MII) | (x)) 376 377#define MII_CLR(x) \ 378 CSR_WRITE_1(sc, RL_MII, \ 379 CSR_READ_1(sc, RL_MII) & ~(x)) 380 381/* 382 * Sync the PHYs by setting data bit and strobing the clock 32 times. 383 */ 384static void 385rl_mii_sync(struct rl_softc *sc) 386{ 387 register int i; 388 389 MII_SET(RL_MII_DIR|RL_MII_DATAOUT); 390 391 for (i = 0; i < 32; i++) { 392 MII_SET(RL_MII_CLK); 393 DELAY(1); 394 MII_CLR(RL_MII_CLK); 395 DELAY(1); 396 } 397} 398 399/* 400 * Clock a series of bits through the MII. 401 */ 402static void 403rl_mii_send(struct rl_softc *sc, uint32_t bits, int cnt) 404{ 405 int i; 406 407 MII_CLR(RL_MII_CLK); 408 409 for (i = (0x1 << (cnt - 1)); i; i >>= 1) { 410 if (bits & i) { 411 MII_SET(RL_MII_DATAOUT); 412 } else { 413 MII_CLR(RL_MII_DATAOUT); 414 } 415 DELAY(1); 416 MII_CLR(RL_MII_CLK); 417 DELAY(1); 418 MII_SET(RL_MII_CLK); 419 } 420} 421 422/* 423 * Read an PHY register through the MII. 424 */ 425static int 426rl_mii_readreg(struct rl_softc *sc, struct rl_mii_frame *frame) 427{ 428 int i, ack; 429 430 RL_LOCK(sc); 431 432 /* Set up frame for RX. */ 433 frame->mii_stdelim = RL_MII_STARTDELIM; 434 frame->mii_opcode = RL_MII_READOP; 435 frame->mii_turnaround = 0; 436 frame->mii_data = 0; 437 438 CSR_WRITE_2(sc, RL_MII, 0); 439 440 /* Turn on data xmit. */ 441 MII_SET(RL_MII_DIR); 442 443 rl_mii_sync(sc); 444 445 /* Send command/address info. */ 446 rl_mii_send(sc, frame->mii_stdelim, 2); 447 rl_mii_send(sc, frame->mii_opcode, 2); 448 rl_mii_send(sc, frame->mii_phyaddr, 5); 449 rl_mii_send(sc, frame->mii_regaddr, 5); 450 451 /* Idle bit */ 452 MII_CLR((RL_MII_CLK|RL_MII_DATAOUT)); 453 DELAY(1); 454 MII_SET(RL_MII_CLK); 455 DELAY(1); 456 457 /* Turn off xmit. */ 458 MII_CLR(RL_MII_DIR); 459 460 /* Check for ack */ 461 MII_CLR(RL_MII_CLK); 462 DELAY(1); 463 ack = CSR_READ_2(sc, RL_MII) & RL_MII_DATAIN; 464 MII_SET(RL_MII_CLK); 465 DELAY(1); 466 467 /* 468 * Now try reading data bits. If the ack failed, we still 469 * need to clock through 16 cycles to keep the PHY(s) in sync. 470 */ 471 if (ack) { 472 for(i = 0; i < 16; i++) { 473 MII_CLR(RL_MII_CLK); 474 DELAY(1); 475 MII_SET(RL_MII_CLK); 476 DELAY(1); 477 } 478 goto fail; 479 } 480 481 for (i = 0x8000; i; i >>= 1) { 482 MII_CLR(RL_MII_CLK); 483 DELAY(1); 484 if (!ack) { 485 if (CSR_READ_2(sc, RL_MII) & RL_MII_DATAIN) 486 frame->mii_data |= i; 487 DELAY(1); 488 } 489 MII_SET(RL_MII_CLK); 490 DELAY(1); 491 } 492 493fail: 494 MII_CLR(RL_MII_CLK); 495 DELAY(1); 496 MII_SET(RL_MII_CLK); 497 DELAY(1); 498 499 RL_UNLOCK(sc); 500 501 return (ack ? 1 : 0); 502} 503 504/* 505 * Write to a PHY register through the MII. 506 */ 507static int 508rl_mii_writereg(struct rl_softc *sc, struct rl_mii_frame *frame) 509{ 510 511 RL_LOCK(sc); 512 513 /* Set up frame for TX. */ 514 frame->mii_stdelim = RL_MII_STARTDELIM; 515 frame->mii_opcode = RL_MII_WRITEOP; 516 frame->mii_turnaround = RL_MII_TURNAROUND; 517 518 /* Turn on data output. */ 519 MII_SET(RL_MII_DIR); 520 521 rl_mii_sync(sc); 522 523 rl_mii_send(sc, frame->mii_stdelim, 2); 524 rl_mii_send(sc, frame->mii_opcode, 2); 525 rl_mii_send(sc, frame->mii_phyaddr, 5); 526 rl_mii_send(sc, frame->mii_regaddr, 5); 527 rl_mii_send(sc, frame->mii_turnaround, 2); 528 rl_mii_send(sc, frame->mii_data, 16); 529 530 /* Idle bit. */ 531 MII_SET(RL_MII_CLK); 532 DELAY(1); 533 MII_CLR(RL_MII_CLK); 534 DELAY(1); 535 536 /* Turn off xmit. */ 537 MII_CLR(RL_MII_DIR); 538 539 RL_UNLOCK(sc); 540 541 return (0); 542} 543 544static int 545rl_miibus_readreg(device_t dev, int phy, int reg) 546{ 547 struct rl_softc *sc; 548 struct rl_mii_frame frame; 549 uint16_t rval = 0; 550 uint16_t rl8139_reg = 0; 551 552 sc = device_get_softc(dev); 553 554 if (sc->rl_type == RL_8139) { 555 /* Pretend the internal PHY is only at address 0 */ 556 if (phy) { 557 return (0); 558 } 559 switch (reg) { 560 case MII_BMCR: 561 rl8139_reg = RL_BMCR; 562 break; 563 case MII_BMSR: 564 rl8139_reg = RL_BMSR; 565 break; 566 case MII_ANAR: 567 rl8139_reg = RL_ANAR; 568 break; 569 case MII_ANER: 570 rl8139_reg = RL_ANER; 571 break; 572 case MII_ANLPAR: 573 rl8139_reg = RL_LPAR; 574 break; 575 case MII_PHYIDR1: 576 case MII_PHYIDR2: 577 return (0); 578 /* 579 * Allow the rlphy driver to read the media status 580 * register. If we have a link partner which does not 581 * support NWAY, this is the register which will tell 582 * us the results of parallel detection. 583 */ 584 case RL_MEDIASTAT: 585 rval = CSR_READ_1(sc, RL_MEDIASTAT); 586 return (rval); 587 default: 588 if_printf(&sc->arpcom.ac_if, "bad phy register\n"); 589 return (0); 590 } 591 rval = CSR_READ_2(sc, rl8139_reg); 592 return (rval); 593 } 594 595 bzero((char *)&frame, sizeof(frame)); 596 frame.mii_phyaddr = phy; 597 frame.mii_regaddr = reg; 598 rl_mii_readreg(sc, &frame); 599 600 return (frame.mii_data); 601} 602 603static int 604rl_miibus_writereg(device_t dev, int phy, int reg, int data) 605{ 606 struct rl_softc *sc; 607 struct rl_mii_frame frame; 608 uint16_t rl8139_reg = 0; 609 610 sc = device_get_softc(dev); 611 612 if (sc->rl_type == RL_8139) { 613 /* Pretend the internal PHY is only at address 0 */ 614 if (phy) { 615 return (0); 616 } 617 switch (reg) { 618 case MII_BMCR: 619 rl8139_reg = RL_BMCR; 620 break; 621 case MII_BMSR: 622 rl8139_reg = RL_BMSR; 623 break; 624 case MII_ANAR: 625 rl8139_reg = RL_ANAR; 626 break; 627 case MII_ANER: 628 rl8139_reg = RL_ANER; 629 break; 630 case MII_ANLPAR: 631 rl8139_reg = RL_LPAR; 632 break; 633 case MII_PHYIDR1: 634 case MII_PHYIDR2: 635 return (0); 636 break; 637 default: 638 if_printf(&sc->arpcom.ac_if, "bad phy register\n"); 639 return (0); 640 } 641 CSR_WRITE_2(sc, rl8139_reg, data); 642 return (0); 643 } 644 645 bzero((char *)&frame, sizeof(frame)); 646 frame.mii_phyaddr = phy; 647 frame.mii_regaddr = reg; 648 frame.mii_data = data; 649 rl_mii_writereg(sc, &frame); 650 651 return (0); 652} 653 654static void 655rl_miibus_statchg(device_t dev) 656{ 657} 658 659/* 660 * Program the 64-bit multicast hash filter. 661 */ 662static void 663rl_setmulti(struct rl_softc *sc) 664{ 665 struct ifnet *ifp = &sc->arpcom.ac_if; 666 int h = 0; 667 uint32_t hashes[2] = { 0, 0 }; 668 struct ifmultiaddr *ifma; 669 uint32_t rxfilt; 670 int mcnt = 0; 671 672 RL_LOCK_ASSERT(sc); 673 674 rxfilt = CSR_READ_4(sc, RL_RXCFG); 675 676 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { 677 rxfilt |= RL_RXCFG_RX_MULTI; 678 CSR_WRITE_4(sc, RL_RXCFG, rxfilt); 679 CSR_WRITE_4(sc, RL_MAR0, 0xFFFFFFFF); 680 CSR_WRITE_4(sc, RL_MAR4, 0xFFFFFFFF); 681 return; 682 } 683 684 /* first, zot all the existing hash bits */ 685 CSR_WRITE_4(sc, RL_MAR0, 0); 686 CSR_WRITE_4(sc, RL_MAR4, 0); 687 688 /* now program new ones */ 689 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { 690 if (ifma->ifma_addr->sa_family != AF_LINK) 691 continue; 692 h = ether_crc32_be(LLADDR((struct sockaddr_dl *) 693 ifma->ifma_addr), ETHER_ADDR_LEN) >> 26; 694 if (h < 32) 695 hashes[0] |= (1 << h); 696 else 697 hashes[1] |= (1 << (h - 32)); 698 mcnt++; 699 } 700 701 if (mcnt) 702 rxfilt |= RL_RXCFG_RX_MULTI; 703 else 704 rxfilt &= ~RL_RXCFG_RX_MULTI; 705 706 CSR_WRITE_4(sc, RL_RXCFG, rxfilt); 707 CSR_WRITE_4(sc, RL_MAR0, hashes[0]); 708 CSR_WRITE_4(sc, RL_MAR4, hashes[1]); 709} 710 711static void 712rl_reset(struct rl_softc *sc) 713{ 714 register int i; 715 716 RL_LOCK_ASSERT(sc); 717 718 CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_RESET); 719 720 for (i = 0; i < RL_TIMEOUT; i++) { 721 DELAY(10); 722 if (!(CSR_READ_1(sc, RL_COMMAND) & RL_CMD_RESET)) 723 break; 724 } 725 if (i == RL_TIMEOUT) 726 if_printf(&sc->arpcom.ac_if, "reset never completed!\n"); 727} 728 729/* 730 * Probe for a RealTek 8129/8139 chip. Check the PCI vendor and device 731 * IDs against our list and return a device name if we find a match. 732 */ 733static int 734rl_probe(device_t dev) 735{ 736 struct rl_softc *sc; 737 struct rl_type *t = rl_devs; 738 int rid; 739 uint32_t hwrev; 740 741 sc = device_get_softc(dev); 742 743 while (t->rl_name != NULL) { 744 if ((pci_get_vendor(dev) == t->rl_vid) && 745 (pci_get_device(dev) == t->rl_did)) { 746 /* 747 * Temporarily map the I/O space 748 * so we can read the chip ID register. 749 */ 750 rid = RL_RID; 751 sc->rl_res = bus_alloc_resource_any(dev, RL_RES, &rid, 752 RF_ACTIVE); 753 if (sc->rl_res == NULL) { 754 device_printf(dev, 755 "couldn't map ports/memory\n"); 756 return (ENXIO); 757 } 758 sc->rl_btag = rman_get_bustag(sc->rl_res); 759 sc->rl_bhandle = rman_get_bushandle(sc->rl_res); 760 761 hwrev = CSR_READ_4(sc, RL_TXCFG) & RL_TXCFG_HWREV; 762 bus_release_resource(dev, RL_RES, RL_RID, sc->rl_res); 763 764 /* Don't attach to 8139C+ or 8169/8110 chips. */ 765 if (hwrev == RL_HWREV_8139CPLUS || 766 (hwrev == RL_HWREV_8169 && 767 t->rl_did == RT_DEVICEID_8169) || 768 hwrev == RL_HWREV_8169S || 769 hwrev == RL_HWREV_8110S) { 770 t++; 771 continue; 772 } 773 774 device_set_desc(dev, t->rl_name); 775 return (BUS_PROBE_DEFAULT); 776 } 777 t++; 778 } 779 780 return (ENXIO); 781} 782 783/* 784 * Attach the interface. Allocate softc structures, do ifmedia 785 * setup and ethernet/BPF attach. 786 */ 787static int 788rl_attach(device_t dev) 789{ 790 uint8_t eaddr[ETHER_ADDR_LEN]; 791 uint16_t as[3]; 792 struct ifnet *ifp; 793 struct rl_softc *sc; 794 struct rl_type *t; 795 int error = 0, i, rid; 796 int unit; 797 uint16_t rl_did = 0; 798 799 sc = device_get_softc(dev); 800 unit = device_get_unit(dev); 801 802 mtx_init(&sc->rl_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, 803 MTX_DEF); 804 805 pci_enable_busmaster(dev); 806 807 /* Map control/status registers. */ 808 rid = RL_RID; 809 sc->rl_res = bus_alloc_resource_any(dev, RL_RES, &rid, RF_ACTIVE); 810 811 if (sc->rl_res == NULL) { 812 device_printf(dev, "couldn't map ports/memory\n"); 813 error = ENXIO; 814 goto fail; 815 } 816 817#ifdef notdef 818 /* 819 * Detect the Realtek 8139B. For some reason, this chip is very 820 * unstable when left to autoselect the media 821 * The best workaround is to set the device to the required 822 * media type or to set it to the 10 Meg speed. 823 */ 824 if ((rman_get_end(sc->rl_res) - rman_get_start(sc->rl_res)) == 0xFF) 825 device_printf(dev, 826"Realtek 8139B detected. Warning, this may be unstable in autoselect mode\n"); 827#endif 828 829 sc->rl_btag = rman_get_bustag(sc->rl_res); 830 sc->rl_bhandle = rman_get_bushandle(sc->rl_res); 831 832 /* Allocate interrupt */ 833 rid = 0; 834 sc->rl_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 835 RF_SHAREABLE | RF_ACTIVE); 836 837 if (sc->rl_irq == NULL) { 838 device_printf(dev, "couldn't map interrupt\n"); 839 error = ENXIO; 840 goto fail; 841 } 842 843 /* 844 * Reset the adapter. Only take the lock here as it's needed in 845 * order to call rl_reset(). 846 */ 847 RL_LOCK(sc); 848 rl_reset(sc); 849 RL_UNLOCK(sc); 850 851 sc->rl_eecmd_read = RL_EECMD_READ_6BIT; 852 rl_read_eeprom(sc, (uint8_t *)&rl_did, 0, 1, 0); 853 if (rl_did != 0x8129) 854 sc->rl_eecmd_read = RL_EECMD_READ_8BIT; 855 856 /* 857 * Get station address from the EEPROM. 858 */ 859 rl_read_eeprom(sc, (uint8_t *)as, RL_EE_EADDR, 3, 0); 860 for (i = 0; i < 3; i++) { 861 eaddr[(i * 2) + 0] = as[i] & 0xff; 862 eaddr[(i * 2) + 1] = as[i] >> 8; 863 } 864 865 sc->rl_unit = unit; 866 bcopy(eaddr, (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN); 867 868 /* 869 * Now read the exact device type from the EEPROM to find 870 * out if it's an 8129 or 8139. 871 */ 872 rl_read_eeprom(sc, (uint8_t *)&rl_did, RL_EE_PCI_DID, 1, 0); 873 874 t = rl_devs; 875 sc->rl_type = 0; 876 while(t->rl_name != NULL) { 877 if (rl_did == t->rl_did) { 878 sc->rl_type = t->rl_basetype; 879 break; 880 } 881 t++; 882 } 883 884 if (sc->rl_type == 0) { 885 device_printf(dev, "unknown device ID: %x\n", rl_did); 886 error = ENXIO; 887 goto fail; 888 } 889 890 /* 891 * Allocate the parent bus DMA tag appropriate for PCI. 892 */ 893#define RL_NSEG_NEW 32 894 error = bus_dma_tag_create(NULL, /* parent */ 895 1, 0, /* alignment, boundary */ 896 BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ 897 BUS_SPACE_MAXADDR, /* highaddr */ 898 NULL, NULL, /* filter, filterarg */ 899 MAXBSIZE, RL_NSEG_NEW, /* maxsize, nsegments */ 900 BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */ 901 BUS_DMA_ALLOCNOW, /* flags */ 902 NULL, NULL, /* lockfunc, lockarg */ 903 &sc->rl_parent_tag); 904 if (error) 905 goto fail; 906 907 /* 908 * Now allocate a tag for the DMA descriptor lists. 909 * All of our lists are allocated as a contiguous block 910 * of memory. 911 */ 912 error = bus_dma_tag_create(sc->rl_parent_tag, /* parent */ 913 1, 0, /* alignment, boundary */ 914 BUS_SPACE_MAXADDR, /* lowaddr */ 915 BUS_SPACE_MAXADDR, /* highaddr */ 916 NULL, NULL, /* filter, filterarg */ 917 RL_RXBUFLEN + 1518, 1, /* maxsize,nsegments */ 918 BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */ 919 BUS_DMA_ALLOCNOW, /* flags */ 920 NULL, NULL, /* lockfunc, lockarg */ 921 &sc->rl_tag); 922 if (error) 923 goto fail; 924 925 /* 926 * Now allocate a chunk of DMA-able memory based on the 927 * tag we just created. 928 */ 929 error = bus_dmamem_alloc(sc->rl_tag, 930 (void **)&sc->rl_cdata.rl_rx_buf, BUS_DMA_NOWAIT | BUS_DMA_ZERO, 931 &sc->rl_cdata.rl_rx_dmamap); 932 if (error) { 933 device_printf(dev, "no memory for list buffers!\n"); 934 bus_dma_tag_destroy(sc->rl_tag); 935 sc->rl_tag = NULL; 936 goto fail; 937 } 938 939 /* Leave a few bytes before the start of the RX ring buffer. */ 940 sc->rl_cdata.rl_rx_buf_ptr = sc->rl_cdata.rl_rx_buf; 941 sc->rl_cdata.rl_rx_buf += sizeof(uint64_t); 942 943 /* Do MII setup */ 944 if (mii_phy_probe(dev, &sc->rl_miibus, 945 rl_ifmedia_upd, rl_ifmedia_sts)) { 946 device_printf(dev, "MII without any phy!\n"); 947 error = ENXIO; 948 goto fail; 949 } 950 951 ifp = &sc->arpcom.ac_if; 952 ifp->if_softc = sc; 953 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 954 ifp->if_mtu = ETHERMTU; 955 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 956 ifp->if_ioctl = rl_ioctl; 957 ifp->if_start = rl_start; 958 ifp->if_watchdog = rl_watchdog; 959 ifp->if_init = rl_init; 960 ifp->if_baudrate = 10000000; 961 ifp->if_capabilities = IFCAP_VLAN_MTU; 962#ifdef DEVICE_POLLING 963 ifp->if_capabilities |= IFCAP_POLLING; 964#endif 965 ifp->if_capenable = ifp->if_capabilities; 966 IFQ_SET_MAXLEN(&ifp->if_snd, IFQ_MAXLEN); 967 ifp->if_snd.ifq_drv_maxlen = IFQ_MAXLEN; 968 IFQ_SET_READY(&ifp->if_snd); 969 970 callout_handle_init(&sc->rl_stat_ch); 971 972 /* 973 * Call MI attach routine. 974 */ 975 ether_ifattach(ifp, eaddr); 976 977 /* Hook interrupt last to avoid having to lock softc */ 978 error = bus_setup_intr(dev, sc->rl_irq, INTR_TYPE_NET | INTR_MPSAFE, 979 rl_intr, sc, &sc->rl_intrhand); 980 if (error) { 981 if_printf(ifp, "couldn't set up irq\n"); 982 ether_ifdetach(ifp); 983 } 984 985fail: 986 if (error) 987 rl_detach(dev); 988 989 return (error); 990} 991 992/* 993 * Shutdown hardware and free up resources. This can be called any 994 * time after the mutex has been initialized. It is called in both 995 * the error case in attach and the normal detach case so it needs 996 * to be careful about only freeing resources that have actually been 997 * allocated. 998 */ 999static int 1000rl_detach(device_t dev) 1001{ 1002 struct rl_softc *sc; 1003 struct ifnet *ifp; 1004 int attached; 1005 1006 sc = device_get_softc(dev); 1007 ifp = &sc->arpcom.ac_if; 1008 1009 KASSERT(mtx_initialized(&sc->rl_mtx), ("rl mutex not initialized")); 1010 attached = device_is_attached(dev); 1011 /* These should only be active if attach succeeded */ 1012 if (attached) 1013 ether_ifdetach(ifp); 1014 RL_LOCK(sc); 1015#if 0 1016 sc->suspended = 1; 1017#endif 1018 if (attached) 1019 rl_stop(sc); 1020 if (sc->rl_miibus) 1021 device_delete_child(dev, sc->rl_miibus); 1022 bus_generic_detach(dev); 1023 1024 if (sc->rl_intrhand) 1025 bus_teardown_intr(dev, sc->rl_irq, sc->rl_intrhand); 1026 if (sc->rl_irq) 1027 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->rl_irq); 1028 if (sc->rl_res) 1029 bus_release_resource(dev, RL_RES, RL_RID, sc->rl_res); 1030 1031 if (sc->rl_tag) { 1032 bus_dmamap_unload(sc->rl_tag, sc->rl_cdata.rl_rx_dmamap); 1033 bus_dmamem_free(sc->rl_tag, sc->rl_cdata.rl_rx_buf, 1034 sc->rl_cdata.rl_rx_dmamap); 1035 bus_dma_tag_destroy(sc->rl_tag); 1036 } 1037 if (sc->rl_parent_tag) 1038 bus_dma_tag_destroy(sc->rl_parent_tag); 1039 1040 RL_UNLOCK(sc); 1041 mtx_destroy(&sc->rl_mtx); 1042 1043 return (0); 1044} 1045 1046/* 1047 * Initialize the transmit descriptors. 1048 */ 1049static int 1050rl_list_tx_init(struct rl_softc *sc) 1051{ 1052 struct rl_chain_data *cd; 1053 int i; 1054 1055 RL_LOCK_ASSERT(sc); 1056 1057 cd = &sc->rl_cdata; 1058 for (i = 0; i < RL_TX_LIST_CNT; i++) { 1059 cd->rl_tx_chain[i] = NULL; 1060 CSR_WRITE_4(sc, 1061 RL_TXADDR0 + (i * sizeof(uint32_t)), 0x0000000); 1062 } 1063 1064 sc->rl_cdata.cur_tx = 0; 1065 sc->rl_cdata.last_tx = 0; 1066 1067 return (0); 1068} 1069 1070/* 1071 * A frame has been uploaded: pass the resulting mbuf chain up to 1072 * the higher level protocols. 1073 * 1074 * You know there's something wrong with a PCI bus-master chip design 1075 * when you have to use m_devget(). 1076 * 1077 * The receive operation is badly documented in the datasheet, so I'll 1078 * attempt to document it here. The driver provides a buffer area and 1079 * places its base address in the RX buffer start address register. 1080 * The chip then begins copying frames into the RX buffer. Each frame 1081 * is preceded by a 32-bit RX status word which specifies the length 1082 * of the frame and certain other status bits. Each frame (starting with 1083 * the status word) is also 32-bit aligned. The frame length is in the 1084 * first 16 bits of the status word; the lower 15 bits correspond with 1085 * the 'rx status register' mentioned in the datasheet. 1086 * 1087 * Note: to make the Alpha happy, the frame payload needs to be aligned 1088 * on a 32-bit boundary. To achieve this, we pass RL_ETHER_ALIGN (2 bytes) 1089 * as the offset argument to m_devget(). 1090 */ 1091static void 1092rl_rxeof(struct rl_softc *sc) 1093{ 1094 struct mbuf *m; 1095 struct ifnet *ifp = &sc->arpcom.ac_if; 1096 uint8_t *rxbufpos; 1097 int total_len = 0; 1098 int wrap = 0; 1099 uint32_t rxstat; 1100 uint16_t cur_rx; 1101 uint16_t limit; 1102 uint16_t max_bytes, rx_bytes = 0; 1103 1104 RL_LOCK_ASSERT(sc); 1105 1106 bus_dmamap_sync(sc->rl_tag, sc->rl_cdata.rl_rx_dmamap, 1107 BUS_DMASYNC_POSTREAD); 1108 1109 cur_rx = (CSR_READ_2(sc, RL_CURRXADDR) + 16) % RL_RXBUFLEN; 1110 1111 /* Do not try to read past this point. */ 1112 limit = CSR_READ_2(sc, RL_CURRXBUF) % RL_RXBUFLEN; 1113 1114 if (limit < cur_rx) 1115 max_bytes = (RL_RXBUFLEN - cur_rx) + limit; 1116 else 1117 max_bytes = limit - cur_rx; 1118 1119 while((CSR_READ_1(sc, RL_COMMAND) & RL_CMD_EMPTY_RXBUF) == 0) { 1120#ifdef DEVICE_POLLING 1121 if (ifp->if_flags & IFF_POLLING) { 1122 if (sc->rxcycles <= 0) 1123 break; 1124 sc->rxcycles--; 1125 } 1126#endif /* DEVICE_POLLING */ 1127 rxbufpos = sc->rl_cdata.rl_rx_buf + cur_rx; 1128 rxstat = le32toh(*(uint32_t *)rxbufpos); 1129 1130 /* 1131 * Here's a totally undocumented fact for you. When the 1132 * RealTek chip is in the process of copying a packet into 1133 * RAM for you, the length will be 0xfff0. If you spot a 1134 * packet header with this value, you need to stop. The 1135 * datasheet makes absolutely no mention of this and 1136 * RealTek should be shot for this. 1137 */ 1138 if ((uint16_t)(rxstat >> 16) == RL_RXSTAT_UNFINISHED) 1139 break; 1140 1141 if (!(rxstat & RL_RXSTAT_RXOK)) { 1142 ifp->if_ierrors++; 1143 rl_init_locked(sc); 1144 return; 1145 } 1146 1147 /* No errors; receive the packet. */ 1148 total_len = rxstat >> 16; 1149 rx_bytes += total_len + 4; 1150 1151 /* 1152 * XXX The RealTek chip includes the CRC with every 1153 * received frame, and there's no way to turn this 1154 * behavior off (at least, I can't find anything in 1155 * the manual that explains how to do it) so we have 1156 * to trim off the CRC manually. 1157 */ 1158 total_len -= ETHER_CRC_LEN; 1159 1160 /* 1161 * Avoid trying to read more bytes than we know 1162 * the chip has prepared for us. 1163 */ 1164 if (rx_bytes > max_bytes) 1165 break; 1166 1167 rxbufpos = sc->rl_cdata.rl_rx_buf + 1168 ((cur_rx + sizeof(uint32_t)) % RL_RXBUFLEN); 1169 if (rxbufpos == (sc->rl_cdata.rl_rx_buf + RL_RXBUFLEN)) 1170 rxbufpos = sc->rl_cdata.rl_rx_buf; 1171 1172 wrap = (sc->rl_cdata.rl_rx_buf + RL_RXBUFLEN) - rxbufpos; 1173 if (total_len > wrap) { 1174 m = m_devget(rxbufpos, total_len, RL_ETHER_ALIGN, ifp, 1175 NULL); 1176 if (m == NULL) { 1177 ifp->if_ierrors++; 1178 } else { 1179 m_copyback(m, wrap, total_len - wrap, 1180 sc->rl_cdata.rl_rx_buf); 1181 } 1182 cur_rx = (total_len - wrap + ETHER_CRC_LEN); 1183 } else { 1184 m = m_devget(rxbufpos, total_len, RL_ETHER_ALIGN, ifp, 1185 NULL); 1186 if (m == NULL) 1187 ifp->if_ierrors++; 1188 cur_rx += total_len + 4 + ETHER_CRC_LEN; 1189 } 1190 1191 /* Round up to 32-bit boundary. */ 1192 cur_rx = (cur_rx + 3) & ~3; 1193 CSR_WRITE_2(sc, RL_CURRXADDR, cur_rx - 16); 1194 1195 if (m == NULL) 1196 continue; 1197 1198 ifp->if_ipackets++; 1199 RL_UNLOCK(sc); 1200 (*ifp->if_input)(ifp, m); 1201 RL_LOCK(sc); 1202 } 1203} 1204 1205/* 1206 * A frame was downloaded to the chip. It's safe for us to clean up 1207 * the list buffers. 1208 */ 1209static void 1210rl_txeof(struct rl_softc *sc) 1211{ 1212 struct ifnet *ifp = &sc->arpcom.ac_if; 1213 uint32_t txstat; 1214 1215 RL_LOCK_ASSERT(sc); 1216 1217 /* 1218 * Go through our tx list and free mbufs for those 1219 * frames that have been uploaded. 1220 */ 1221 do { 1222 if (RL_LAST_TXMBUF(sc) == NULL) 1223 break; 1224 txstat = CSR_READ_4(sc, RL_LAST_TXSTAT(sc)); 1225 if (!(txstat & (RL_TXSTAT_TX_OK| 1226 RL_TXSTAT_TX_UNDERRUN|RL_TXSTAT_TXABRT))) 1227 break; 1228 1229 ifp->if_collisions += (txstat & RL_TXSTAT_COLLCNT) >> 24; 1230 1231 bus_dmamap_unload(sc->rl_tag, RL_LAST_DMAMAP(sc)); 1232 bus_dmamap_destroy(sc->rl_tag, RL_LAST_DMAMAP(sc)); 1233 m_freem(RL_LAST_TXMBUF(sc)); 1234 RL_LAST_TXMBUF(sc) = NULL; 1235 /* 1236 * If there was a transmit underrun, bump the TX threshold. 1237 * Make sure not to overflow the 63 * 32byte we can address 1238 * with the 6 available bit. 1239 */ 1240 if ((txstat & RL_TXSTAT_TX_UNDERRUN) && 1241 (sc->rl_txthresh < 2016)) 1242 sc->rl_txthresh += 32; 1243 if (txstat & RL_TXSTAT_TX_OK) 1244 ifp->if_opackets++; 1245 else { 1246 int oldthresh; 1247 ifp->if_oerrors++; 1248 if ((txstat & RL_TXSTAT_TXABRT) || 1249 (txstat & RL_TXSTAT_OUTOFWIN)) 1250 CSR_WRITE_4(sc, RL_TXCFG, RL_TXCFG_CONFIG); 1251 oldthresh = sc->rl_txthresh; 1252 /* error recovery */ 1253 rl_reset(sc); 1254 rl_init_locked(sc); 1255 /* restore original threshold */ 1256 sc->rl_txthresh = oldthresh; 1257 return; 1258 } 1259 RL_INC(sc->rl_cdata.last_tx); 1260 ifp->if_flags &= ~IFF_OACTIVE; 1261 } while (sc->rl_cdata.last_tx != sc->rl_cdata.cur_tx); 1262 1263 if (RL_LAST_TXMBUF(sc) == NULL) 1264 ifp->if_timer = 0; 1265 else if (ifp->if_timer == 0) 1266 ifp->if_timer = 5; 1267} 1268 1269static void 1270rl_tick(void *xsc) 1271{ 1272 struct rl_softc *sc = xsc; 1273 struct mii_data *mii; 1274 1275 RL_LOCK(sc); 1276 mii = device_get_softc(sc->rl_miibus); 1277 mii_tick(mii); 1278 1279 sc->rl_stat_ch = timeout(rl_tick, sc, hz); 1280 RL_UNLOCK(sc); 1281} 1282 1283#ifdef DEVICE_POLLING 1284static void 1285rl_poll(struct ifnet *ifp, enum poll_cmd cmd, int count) 1286{ 1287 struct rl_softc *sc = ifp->if_softc; 1288 1289 RL_LOCK(sc); 1290 rl_poll_locked(ifp, cmd, count); 1291 RL_UNLOCK(sc); 1292} 1293 1294static void 1295rl_poll_locked(struct ifnet *ifp, enum poll_cmd cmd, int count) 1296{ 1297 struct rl_softc *sc = ifp->if_softc; 1298 1299 RL_LOCK_ASSERT(sc); 1300 1301 if (!(ifp->if_capenable & IFCAP_POLLING)) { 1302 ether_poll_deregister(ifp); 1303 cmd = POLL_DEREGISTER; 1304 } 1305 1306 if (cmd == POLL_DEREGISTER) { 1307 /* Final call; enable interrupts. */ 1308 CSR_WRITE_2(sc, RL_IMR, RL_INTRS); 1309 return; 1310 } 1311 1312 sc->rxcycles = count; 1313 rl_rxeof(sc); 1314 rl_txeof(sc); 1315 1316 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) 1317 rl_start_locked(ifp); 1318 1319 if (cmd == POLL_AND_CHECK_STATUS) { 1320 uint16_t status; 1321 1322 /* We should also check the status register. */ 1323 status = CSR_READ_2(sc, RL_ISR); 1324 if (status == 0xffff) 1325 return; 1326 if (status != 0) 1327 CSR_WRITE_2(sc, RL_ISR, status); 1328 1329 /* XXX We should check behaviour on receiver stalls. */ 1330 1331 if (status & RL_ISR_SYSTEM_ERR) { 1332 rl_reset(sc); 1333 rl_init_locked(sc); 1334 } 1335 } 1336} 1337#endif /* DEVICE_POLLING */ 1338 1339static void 1340rl_intr(void *arg) 1341{ 1342 struct rl_softc *sc = arg; 1343 struct ifnet *ifp = &sc->arpcom.ac_if; 1344 uint16_t status; 1345 1346 RL_LOCK(sc); 1347 1348 if (sc->suspended) 1349 goto done_locked; 1350 1351#ifdef DEVICE_POLLING 1352 if (ifp->if_flags & IFF_POLLING) 1353 goto done_locked; 1354 1355 if ((ifp->if_capenable & IFCAP_POLLING) && 1356 ether_poll_register(rl_poll, ifp)) { 1357 /* Disable interrupts. */ 1358 CSR_WRITE_2(sc, RL_IMR, 0x0000); 1359 rl_poll_locked(ifp, 0, 1); 1360 goto done_locked; 1361 } 1362#endif /* DEVICE_POLLING */ 1363 1364 for (;;) { 1365 status = CSR_READ_2(sc, RL_ISR); 1366 /* If the card has gone away, the read returns 0xffff. */ 1367 if (status == 0xffff) 1368 break; 1369 if (status != 0) 1370 CSR_WRITE_2(sc, RL_ISR, status); 1371 if ((status & RL_INTRS) == 0) 1372 break; 1373 if (status & RL_ISR_RX_OK) 1374 rl_rxeof(sc); 1375 if (status & RL_ISR_RX_ERR) 1376 rl_rxeof(sc); 1377 if ((status & RL_ISR_TX_OK) || (status & RL_ISR_TX_ERR)) 1378 rl_txeof(sc); 1379 if (status & RL_ISR_SYSTEM_ERR) { 1380 rl_reset(sc); 1381 rl_init_locked(sc); 1382 } 1383 } 1384 1385 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) 1386 rl_start_locked(ifp); 1387 1388done_locked: 1389 RL_UNLOCK(sc); 1390} 1391 1392/* 1393 * Encapsulate an mbuf chain in a descriptor by coupling the mbuf data 1394 * pointers to the fragment pointers. 1395 */ 1396static int 1397rl_encap(struct rl_softc *sc, struct mbuf *m_head) 1398{ 1399 struct mbuf *m_new = NULL; 1400 1401 RL_LOCK_ASSERT(sc); 1402 1403 /* 1404 * The RealTek is brain damaged and wants longword-aligned 1405 * TX buffers, plus we can only have one fragment buffer 1406 * per packet. We have to copy pretty much all the time. 1407 */ 1408 m_new = m_defrag(m_head, M_DONTWAIT); 1409 1410 if (m_new == NULL) { 1411 m_freem(m_head); 1412 return (1); 1413 } 1414 m_head = m_new; 1415 1416 /* Pad frames to at least 60 bytes. */ 1417 if (m_head->m_pkthdr.len < RL_MIN_FRAMELEN) { 1418 /* 1419 * Make security concious people happy: zero out the 1420 * bytes in the pad area, since we don't know what 1421 * this mbuf cluster buffer's previous user might 1422 * have left in it. 1423 */ 1424 bzero(mtod(m_head, char *) + m_head->m_pkthdr.len, 1425 RL_MIN_FRAMELEN - m_head->m_pkthdr.len); 1426 m_head->m_pkthdr.len += 1427 (RL_MIN_FRAMELEN - m_head->m_pkthdr.len); 1428 m_head->m_len = m_head->m_pkthdr.len; 1429 } 1430 1431 RL_CUR_TXMBUF(sc) = m_head; 1432 1433 return (0); 1434} 1435 1436/* 1437 * Main transmit routine. 1438 */ 1439static void 1440rl_start(struct ifnet *ifp) 1441{ 1442 struct rl_softc *sc = ifp->if_softc; 1443 1444 RL_LOCK(sc); 1445 rl_start_locked(ifp); 1446 RL_UNLOCK(sc); 1447} 1448 1449static void 1450rl_start_locked(struct ifnet *ifp) 1451{ 1452 struct rl_softc *sc = ifp->if_softc; 1453 struct mbuf *m_head = NULL; 1454 1455 RL_LOCK_ASSERT(sc); 1456 1457 while (RL_CUR_TXMBUF(sc) == NULL) { 1458 1459 IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head); 1460 1461 if (m_head == NULL) 1462 break; 1463 1464 if (rl_encap(sc, m_head)) 1465 break; 1466 1467 /* Pass a copy of this mbuf chain to the bpf subsystem. */ 1468 BPF_MTAP(ifp, RL_CUR_TXMBUF(sc)); 1469 1470 /* Transmit the frame. */ 1471 bus_dmamap_create(sc->rl_tag, 0, &RL_CUR_DMAMAP(sc)); 1472 bus_dmamap_load(sc->rl_tag, RL_CUR_DMAMAP(sc), 1473 mtod(RL_CUR_TXMBUF(sc), void *), 1474 RL_CUR_TXMBUF(sc)->m_pkthdr.len, rl_dma_map_txbuf, sc, 0); 1475 bus_dmamap_sync(sc->rl_tag, RL_CUR_DMAMAP(sc), 1476 BUS_DMASYNC_PREREAD); 1477 CSR_WRITE_4(sc, RL_CUR_TXSTAT(sc), 1478 RL_TXTHRESH(sc->rl_txthresh) | 1479 RL_CUR_TXMBUF(sc)->m_pkthdr.len); 1480 1481 RL_INC(sc->rl_cdata.cur_tx); 1482 1483 /* Set a timeout in case the chip goes out to lunch. */ 1484 ifp->if_timer = 5; 1485 } 1486 1487 /* 1488 * We broke out of the loop because all our TX slots are 1489 * full. Mark the NIC as busy until it drains some of the 1490 * packets from the queue. 1491 */ 1492 if (RL_CUR_TXMBUF(sc) != NULL) 1493 ifp->if_flags |= IFF_OACTIVE; 1494} 1495 1496static void 1497rl_init(void *xsc) 1498{ 1499 struct rl_softc *sc = xsc; 1500 1501 RL_LOCK(sc); 1502 rl_init_locked(sc); 1503 RL_UNLOCK(sc); 1504} 1505 1506static void 1507rl_init_locked(struct rl_softc *sc) 1508{ 1509 struct ifnet *ifp = &sc->arpcom.ac_if; 1510 struct mii_data *mii; 1511 uint32_t rxcfg = 0; 1512 1513 RL_LOCK_ASSERT(sc); 1514 1515 mii = device_get_softc(sc->rl_miibus); 1516 1517 /* 1518 * Cancel pending I/O and free all RX/TX buffers. 1519 */ 1520 rl_stop(sc); 1521 1522 /* 1523 * Init our MAC address. Even though the chipset 1524 * documentation doesn't mention it, we need to enter "Config 1525 * register write enable" mode to modify the ID registers. 1526 */ 1527 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_WRITECFG); 1528 CSR_WRITE_STREAM_4(sc, RL_IDR0, 1529 *(uint32_t *)(&sc->arpcom.ac_enaddr[0])); 1530 CSR_WRITE_STREAM_4(sc, RL_IDR4, 1531 *(uint32_t *)(&sc->arpcom.ac_enaddr[4])); 1532 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); 1533 1534 /* Init the RX buffer pointer register. */ 1535 bus_dmamap_load(sc->rl_tag, sc->rl_cdata.rl_rx_dmamap, 1536 sc->rl_cdata.rl_rx_buf, RL_RXBUFLEN, rl_dma_map_rxbuf, sc, 0); 1537 bus_dmamap_sync(sc->rl_tag, sc->rl_cdata.rl_rx_dmamap, 1538 BUS_DMASYNC_PREWRITE); 1539 1540 /* Init TX descriptors. */ 1541 rl_list_tx_init(sc); 1542 1543 /* 1544 * Enable transmit and receive. 1545 */ 1546 CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_TX_ENB|RL_CMD_RX_ENB); 1547 1548 /* 1549 * Set the initial TX and RX configuration. 1550 */ 1551 CSR_WRITE_4(sc, RL_TXCFG, RL_TXCFG_CONFIG); 1552 CSR_WRITE_4(sc, RL_RXCFG, RL_RXCFG_CONFIG); 1553 1554 /* Set the individual bit to receive frames for this host only. */ 1555 rxcfg = CSR_READ_4(sc, RL_RXCFG); 1556 rxcfg |= RL_RXCFG_RX_INDIV; 1557 1558 /* If we want promiscuous mode, set the allframes bit. */ 1559 if (ifp->if_flags & IFF_PROMISC) { 1560 rxcfg |= RL_RXCFG_RX_ALLPHYS; 1561 CSR_WRITE_4(sc, RL_RXCFG, rxcfg); 1562 } else { 1563 rxcfg &= ~RL_RXCFG_RX_ALLPHYS; 1564 CSR_WRITE_4(sc, RL_RXCFG, rxcfg); 1565 } 1566 1567 /* Set capture broadcast bit to capture broadcast frames. */ 1568 if (ifp->if_flags & IFF_BROADCAST) { 1569 rxcfg |= RL_RXCFG_RX_BROAD; 1570 CSR_WRITE_4(sc, RL_RXCFG, rxcfg); 1571 } else { 1572 rxcfg &= ~RL_RXCFG_RX_BROAD; 1573 CSR_WRITE_4(sc, RL_RXCFG, rxcfg); 1574 } 1575 1576 /* Program the multicast filter, if necessary. */ 1577 rl_setmulti(sc); 1578 1579#ifdef DEVICE_POLLING 1580 /* Disable interrupts if we are polling. */ 1581 if (ifp->if_flags & IFF_POLLING) 1582 CSR_WRITE_2(sc, RL_IMR, 0); 1583 else 1584#endif /* DEVICE_POLLING */ 1585 /* Enable interrupts. */ 1586 CSR_WRITE_2(sc, RL_IMR, RL_INTRS); 1587 1588 /* Set initial TX threshold */ 1589 sc->rl_txthresh = RL_TX_THRESH_INIT; 1590 1591 /* Start RX/TX process. */ 1592 CSR_WRITE_4(sc, RL_MISSEDPKT, 0); 1593 1594 /* Enable receiver and transmitter. */ 1595 CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_TX_ENB|RL_CMD_RX_ENB); 1596 1597 mii_mediachg(mii); 1598 1599 CSR_WRITE_1(sc, RL_CFG1, RL_CFG1_DRVLOAD|RL_CFG1_FULLDUPLEX); 1600 1601 ifp->if_flags |= IFF_RUNNING; 1602 ifp->if_flags &= ~IFF_OACTIVE; 1603 1604 sc->rl_stat_ch = timeout(rl_tick, sc, hz); 1605} 1606 1607/* 1608 * Set media options. 1609 */ 1610static int 1611rl_ifmedia_upd(struct ifnet *ifp) 1612{ 1613 struct rl_softc *sc = ifp->if_softc; 1614 struct mii_data *mii; 1615 1616 mii = device_get_softc(sc->rl_miibus); 1617 1618 mii_mediachg(mii); 1619 1620 return (0); 1621} 1622 1623/* 1624 * Report current media status. 1625 */ 1626static void 1627rl_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) 1628{ 1629 struct rl_softc *sc = ifp->if_softc; 1630 struct mii_data *mii; 1631 1632 mii = device_get_softc(sc->rl_miibus); 1633 1634 mii_pollstat(mii); 1635 ifmr->ifm_active = mii->mii_media_active; 1636 ifmr->ifm_status = mii->mii_media_status; 1637} 1638 1639static int 1640rl_ioctl(struct ifnet *ifp, u_long command, caddr_t data) 1641{ 1642 struct ifreq *ifr = (struct ifreq *)data; 1643 struct mii_data *mii; 1644 struct rl_softc *sc = ifp->if_softc; 1645 int error = 0; 1646 1647 switch (command) { 1648 case SIOCSIFFLAGS: 1649 RL_LOCK(sc); 1650 if (ifp->if_flags & IFF_UP) { 1651 rl_init_locked(sc); 1652 } else { 1653 if (ifp->if_flags & IFF_RUNNING) 1654 rl_stop(sc); 1655 } 1656 RL_UNLOCK(sc); 1657 error = 0; 1658 break; 1659 case SIOCADDMULTI: 1660 case SIOCDELMULTI: 1661 RL_LOCK(sc); 1662 rl_setmulti(sc); 1663 RL_UNLOCK(sc); 1664 error = 0; 1665 break; 1666 case SIOCGIFMEDIA: 1667 case SIOCSIFMEDIA: 1668 mii = device_get_softc(sc->rl_miibus); 1669 error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); 1670 break; 1671 case SIOCSIFCAP: 1672 ifp->if_capenable &= ~IFCAP_POLLING; 1673 ifp->if_capenable |= ifr->ifr_reqcap & IFCAP_POLLING; 1674 break; 1675 default: 1676 error = ether_ioctl(ifp, command, data); 1677 break; 1678 } 1679 1680 return (error); 1681} 1682 1683static void 1684rl_watchdog(struct ifnet *ifp) 1685{ 1686 struct rl_softc *sc = ifp->if_softc; 1687 1688 RL_LOCK(sc); 1689 1690 if_printf(ifp, "watchdog timeout\n"); 1691 ifp->if_oerrors++; 1692 1693 rl_txeof(sc); 1694 rl_rxeof(sc); 1695 rl_init_locked(sc); 1696 1697 RL_UNLOCK(sc); 1698} 1699 1700/* 1701 * Stop the adapter and free any mbufs allocated to the 1702 * RX and TX lists. 1703 */ 1704static void 1705rl_stop(struct rl_softc *sc) 1706{ 1707 register int i; 1708 struct ifnet *ifp = &sc->arpcom.ac_if; 1709 1710 RL_LOCK_ASSERT(sc); 1711 1712 ifp->if_timer = 0; 1713 untimeout(rl_tick, sc, sc->rl_stat_ch); 1714 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 1715#ifdef DEVICE_POLLING 1716 ether_poll_deregister(ifp); 1717#endif /* DEVICE_POLLING */ 1718 1719 CSR_WRITE_1(sc, RL_COMMAND, 0x00); 1720 CSR_WRITE_2(sc, RL_IMR, 0x0000); 1721 bus_dmamap_unload(sc->rl_tag, sc->rl_cdata.rl_rx_dmamap); 1722 1723 /* 1724 * Free the TX list buffers. 1725 */ 1726 for (i = 0; i < RL_TX_LIST_CNT; i++) { 1727 if (sc->rl_cdata.rl_tx_chain[i] != NULL) { 1728 bus_dmamap_unload(sc->rl_tag, 1729 sc->rl_cdata.rl_tx_dmamap[i]); 1730 bus_dmamap_destroy(sc->rl_tag, 1731 sc->rl_cdata.rl_tx_dmamap[i]); 1732 m_freem(sc->rl_cdata.rl_tx_chain[i]); 1733 sc->rl_cdata.rl_tx_chain[i] = NULL; 1734 CSR_WRITE_4(sc, RL_TXADDR0 + (i * sizeof(uint32_t)), 1735 0x0000000); 1736 } 1737 } 1738} 1739 1740/* 1741 * Device suspend routine. Stop the interface and save some PCI 1742 * settings in case the BIOS doesn't restore them properly on 1743 * resume. 1744 */ 1745static int 1746rl_suspend(device_t dev) 1747{ 1748 struct rl_softc *sc; 1749 1750 sc = device_get_softc(dev); 1751 1752 RL_LOCK(sc); 1753 rl_stop(sc); 1754 sc->suspended = 1; 1755 RL_UNLOCK(sc); 1756 1757 return (0); 1758} 1759 1760/* 1761 * Device resume routine. Restore some PCI settings in case the BIOS 1762 * doesn't, re-enable busmastering, and restart the interface if 1763 * appropriate. 1764 */ 1765static int 1766rl_resume(device_t dev) 1767{ 1768 struct rl_softc *sc; 1769 struct ifnet *ifp; 1770 1771 sc = device_get_softc(dev); 1772 ifp = &sc->arpcom.ac_if; 1773 1774 RL_LOCK(sc); 1775 1776 /* reinitialize interface if necessary */ 1777 if (ifp->if_flags & IFF_UP) 1778 rl_init_locked(sc); 1779 1780 sc->suspended = 0; 1781 1782 RL_UNLOCK(sc); 1783 1784 return (0); 1785} 1786 1787/* 1788 * Stop all chip I/O so that the kernel's probe routines don't 1789 * get confused by errant DMAs when rebooting. 1790 */ 1791static void 1792rl_shutdown(device_t dev) 1793{ 1794 struct rl_softc *sc; 1795 1796 sc = device_get_softc(dev); 1797 1798 RL_LOCK(sc); 1799 rl_stop(sc); 1800 RL_UNLOCK(sc); 1801} 1802