ofw_bus_subr.c revision 186728
1/*-
2 * Copyright (c) 2001 - 2003 by Thomas Moestl <tmm@FreeBSD.org>.
3 * Copyright (c) 2005 Marius Strobl <marius@FreeBSD.org>
4 * All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 *    notice, this list of conditions, and the following disclaimer,
11 *    without modification, immediately at the beginning of the file.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 *    notice, this list of conditions and the following disclaimer in
14 *    the documentation and/or other materials provided with the
15 *    distribution.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * SUCH DAMAGE.
28 */
29
30#include <sys/cdefs.h>
31__FBSDID("$FreeBSD: head/sys/dev/ofw/ofw_bus_subr.c 186728 2009-01-03 19:38:47Z nwhitehorn $");
32
33#include <sys/param.h>
34#include <sys/systm.h>
35#include <sys/bus.h>
36#include <sys/errno.h>
37#include <sys/libkern.h>
38
39#include <dev/ofw/ofw_bus.h>
40#include <dev/ofw/ofw_bus_subr.h>
41#include <dev/ofw/openfirm.h>
42
43#include "ofw_bus_if.h"
44
45int
46ofw_bus_gen_setup_devinfo(struct ofw_bus_devinfo *obd, phandle_t node)
47{
48
49	if (obd == NULL)
50		return (ENOMEM);
51	/* The 'name' property is considered mandatory. */
52	if ((OF_getprop_alloc(node, "name", 1, (void **)&obd->obd_name)) == -1)
53		return (EINVAL);
54	OF_getprop_alloc(node, "compatible", 1, (void **)&obd->obd_compat);
55	OF_getprop_alloc(node, "device_type", 1, (void **)&obd->obd_type);
56	OF_getprop_alloc(node, "model", 1, (void **)&obd->obd_model);
57	obd->obd_node = node;
58	return (0);
59}
60
61void
62ofw_bus_gen_destroy_devinfo(struct ofw_bus_devinfo *obd)
63{
64
65	if (obd == NULL)
66		return;
67	if (obd->obd_compat != NULL)
68		free(obd->obd_compat, M_OFWPROP);
69	if (obd->obd_model != NULL)
70		free(obd->obd_model, M_OFWPROP);
71	if (obd->obd_name != NULL)
72		free(obd->obd_name, M_OFWPROP);
73	if (obd->obd_type != NULL)
74		free(obd->obd_type, M_OFWPROP);
75}
76
77int
78ofw_bus_gen_child_pnpinfo_str(device_t cbdev, device_t child, char *buf,
79    size_t buflen)
80{
81	if (ofw_bus_get_name(child) != NULL) {
82		strlcat(buf, "name=", buflen);
83		strlcat(buf, ofw_bus_get_name(child), buflen);
84	}
85
86	if (ofw_bus_get_compat(child) != NULL) {
87		strlcat(buf, " compat=", buflen);
88		strlcat(buf, ofw_bus_get_compat(child), buflen);
89	}
90
91	return (0);
92};
93
94const char *
95ofw_bus_gen_get_compat(device_t bus, device_t dev)
96{
97	const struct ofw_bus_devinfo *obd;
98
99 	obd = OFW_BUS_GET_DEVINFO(bus, dev);
100	if (obd == NULL)
101		return (NULL);
102	return (obd->obd_compat);
103}
104
105const char *
106ofw_bus_gen_get_model(device_t bus, device_t dev)
107{
108	const struct ofw_bus_devinfo *obd;
109
110 	obd = OFW_BUS_GET_DEVINFO(bus, dev);
111	if (obd == NULL)
112		return (NULL);
113	return (obd->obd_model);
114}
115
116const char *
117ofw_bus_gen_get_name(device_t bus, device_t dev)
118{
119	const struct ofw_bus_devinfo *obd;
120
121 	obd = OFW_BUS_GET_DEVINFO(bus, dev);
122	if (obd == NULL)
123		return (NULL);
124	return (obd->obd_name);
125}
126
127phandle_t
128ofw_bus_gen_get_node(device_t bus, device_t dev)
129{
130	const struct ofw_bus_devinfo *obd;
131
132 	obd = OFW_BUS_GET_DEVINFO(bus, dev);
133	if (obd == NULL)
134		return (0);
135	return (obd->obd_node);
136}
137
138const char *
139ofw_bus_gen_get_type(device_t bus, device_t dev)
140{
141	const struct ofw_bus_devinfo *obd;
142
143 	obd = OFW_BUS_GET_DEVINFO(bus, dev);
144	if (obd == NULL)
145		return (NULL);
146	return (obd->obd_type);
147}
148
149void
150ofw_bus_setup_iinfo(phandle_t node, struct ofw_bus_iinfo *ii, int intrsz)
151{
152	pcell_t addrc;
153	int msksz;
154
155	if (OF_getprop(node, "#address-cells", &addrc, sizeof(addrc)) == -1)
156		addrc = 2;
157	ii->opi_addrc = addrc * sizeof(pcell_t);
158
159	ii->opi_imapsz = OF_getprop_alloc(node, "interrupt-map", 1,
160	    (void **)&ii->opi_imap);
161	if (ii->opi_imapsz > 0) {
162		msksz = OF_getprop_alloc(node, "interrupt-map-mask", 1,
163		    (void **)&ii->opi_imapmsk);
164		/*
165		 * Failure to get the mask is ignored; a full mask is used then.
166		 * Barf on bad mask sizes, however.
167		 */
168		if (msksz != -1 && msksz != ii->opi_addrc + intrsz) {
169			panic("ofw_bus_setup_iinfo: bad interrupt-map-mask "
170			    "property!");
171		}
172	}
173
174}
175
176int
177ofw_bus_lookup_imap(phandle_t node, struct ofw_bus_iinfo *ii, void *reg,
178    int regsz, void *pintr, int pintrsz, void *mintr, int mintrsz,
179    void *maskbuf)
180{
181	int rv;
182
183	if (ii->opi_imapsz <= 0)
184		return (0);
185	KASSERT(regsz >= ii->opi_addrc,
186	    ("ofw_bus_lookup_imap: register size too small: %d < %d",
187		regsz, ii->opi_addrc));
188	rv = OF_getprop(node, "reg", reg, regsz);
189	if (rv < regsz)
190		panic("ofw_bus_lookup_imap: could not get reg property");
191	return (ofw_bus_search_intrmap(pintr, pintrsz, reg, ii->opi_addrc,
192	    ii->opi_imap, ii->opi_imapsz, ii->opi_imapmsk, maskbuf, mintr,
193	    mintrsz));
194}
195
196/*
197 * Map an interrupt using the firmware reg, interrupt-map and
198 * interrupt-map-mask properties.
199 * The interrupt property to be mapped must be of size intrsz, and pointed to
200 * by intr. The regs property of the node for which the mapping is done must
201 * be passed as regs. This property is an array of register specifications;
202 * the size of the address part of such a specification must be passed as
203 * physsz. Only the first element of the property is used.
204 * imap and imapsz hold the interrupt mask and it's size.
205 * imapmsk is a pointer to the interrupt-map-mask property, which must have
206 * a size of physsz + intrsz; it may be NULL, in which case a full mask is
207 * assumed.
208 * maskbuf must point to a buffer of length physsz + intrsz.
209 * The interrupt is returned in result, which must point to a buffer of length
210 * rintrsz (which gives the expected size of the mapped interrupt).
211 * Returns 1 if a mapping was found, 0 otherwise.
212 */
213int
214ofw_bus_search_intrmap(void *intr, int intrsz, void *regs, int physsz,
215    void *imap, int imapsz, void *imapmsk, void *maskbuf, void *result,
216    int rintrsz)
217{
218	phandle_t parent;
219	u_int8_t *ref = maskbuf;
220	u_int8_t *uiintr = intr;
221	u_int8_t *uiregs = regs;
222	u_int8_t *uiimapmsk = imapmsk;
223	u_int8_t *mptr;
224	pcell_t pintrsz;
225	int i, rsz, tsz;
226
227	rsz = -1;
228	if (imapmsk != NULL) {
229		for (i = 0; i < physsz; i++)
230			ref[i] = uiregs[i] & uiimapmsk[i];
231		for (i = 0; i < intrsz; i++)
232			ref[physsz + i] = uiintr[i] & uiimapmsk[physsz + i];
233	} else {
234		bcopy(regs, ref, physsz);
235		bcopy(intr, ref + physsz, intrsz);
236	}
237
238	mptr = imap;
239	i = imapsz;
240	while (i > 0) {
241		bcopy(mptr + physsz + intrsz, &parent, sizeof(parent));
242		if (OF_searchprop(parent, "#interrupt-cells",
243		    &pintrsz, sizeof(pintrsz)) == -1)
244			pintrsz = 1;	/* default */
245		pintrsz *= sizeof(pcell_t);
246
247		/* Compute the map stride size */
248		tsz = physsz + intrsz + sizeof(phandle_t) + pintrsz;
249		KASSERT(i >= tsz, ("ofw_bus_search_intrmap: truncated map"));
250
251		/*
252		 * XXX: Apple hardware uses a second cell to set information
253		 * on the interrupt trigger type. This information should
254		 * be used somewhere to program the PIC.
255		 */
256
257		if (bcmp(ref, mptr, physsz + intrsz) == 0) {
258			bcopy(mptr + physsz + intrsz + sizeof(parent),
259			    result, rintrsz);
260			return (1);
261		}
262		mptr += tsz;
263		i -= tsz;
264	}
265	return (0);
266}
267