mly_tables.h revision 91448
1/*- 2 * Copyright (c) 2000 Michael Smith 3 * Copyright (c) 2000 BSDi 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 * 27 * $FreeBSD: head/sys/dev/mly/mly_tables.h 91448 2002-02-27 23:57:18Z peter $ 28 */ 29 30/* 31 * Lookup table for code-to-text translations. 32 */ 33struct mly_code_lookup { 34 char *string; 35 u_int32_t code; 36}; 37 38static char *mly_describe_code(struct mly_code_lookup *table, u_int32_t code); 39 40/******************************************************************************** 41 * Look up a text description of a numeric code and return a pointer to same. 42 */ 43static char * 44mly_describe_code(struct mly_code_lookup *table, u_int32_t code) 45{ 46 int i; 47 48 for (i = 0; table[i].string != NULL; i++) 49 if (table[i].code == code) 50 return(table[i].string); 51 return(table[i+1].string); 52} 53 54#if 0 55static struct mly_code_lookup mly_table_bustype[] = { 56 {"SCSI", 0x00}, 57 {"FC-AL", 0x01}, 58 {"PCI", 0x03}, 59 {NULL, 0}, 60 {"unknown bus", 0} 61}; 62#endif 63 64static struct mly_code_lookup mly_table_controllertype[] = { 65#if 0 /* not supported by this driver */ 66 {"DAC960E", 0x01}, /* EISA */ 67 {"DAC960M", 0x08}, /* MCA */ 68 {"DAC960PD", 0x10}, /* PCI Dual */ 69 {"DAC960PL", 0x11}, /* PCU low-cost */ 70 {"DAC960PDU", 0x12}, /* PD Ultra */ 71 {"DAC960PE", 0x13}, /* Peregrine low-cost */ 72 {"DAC960PG", 0x14}, /* Peregrine high-performance */ 73 {"DAC960PJ", 0x15}, /* Road Runner */ 74 {"DAC960PTL0", 0x16}, /* Jaguar */ 75 {"DAC960PR", 0x17}, /* Road Runner (again?) */ 76 {"DAC960PRL", 0x18}, /* Tomcat */ 77 {"DAC960PT", 0x19}, /* Road Runner (yet again?) */ 78 {"DAC1164P", 0x1a}, /* Little Apple */ 79 {"DAC960PTL1", 0x1b}, /* Jaguar+ */ 80#endif 81 {"EXR2000P", 0x1c}, /* Big Apple */ 82 {"EXR3000P", 0x1d}, /* Fibre Apple */ 83 {"AcceleRAID 352", 0x1e}, /* Leopard */ 84 {"AcceleRAID 170", 0x1f}, /* Lynx */ 85 {"AcceleRAID 160", 0x20}, /* Bobcat */ 86 {NULL, 0}, 87 {"unknown adapter", 0} 88}; 89 90static struct mly_code_lookup mly_table_oemname[] = { 91 {"Mylex", MLY_OEM_MYLEX}, 92 {"IBM", MLY_OEM_IBM}, 93 {"Hewlett-Packard", MLY_OEM_HP}, 94 {"DEC/Compaq", MLY_OEM_DEC}, 95 {"Siemens", MLY_OEM_SIEMENS}, 96 {"Intel", MLY_OEM_INTEL}, 97 {NULL, 0}, 98 {"unknown OEM", 0} 99}; 100 101static struct mly_code_lookup mly_table_memorytype[] = { 102 {"DRAM", 0x01}, 103 {"EDRAM", 0x02}, 104 {"EDO RAM", 0x03}, 105 {"SDRAM", 0x04}, 106 {NULL, 0}, 107 {"unknown memory", 0} 108}; 109 110static struct mly_code_lookup mly_table_cputype[] = { 111 {"i960CA", 0x01}, 112 {"i960RD", 0x02}, 113 {"i960RN", 0x03}, 114 {"i960RP", 0x04}, 115 {"NorthBay(?)", 0x05}, 116 {"StrongArm", 0x06}, 117 {"i960RM", 0x07}, 118 {NULL, 0}, 119 {"unknown CPU", 0} 120}; 121 122/* 123 * This table is directly derived from the corresponding table in the 124 * Linux driver, and uses a derivative encoding for simplicity's sake. 125 * 126 * The first character of the string determines the format of the message. 127 * 128 * p "physical device <channel>:<target> <text>" (physical device status) 129 * s "physical device <channel>:<target> <text>" (scsi message or error) 130 * " sense key <key> asc <asc> ascq <ascq>" 131 * " info <info> csi <csi>" 132 * l "logical drive <unit>: <text>" (logical device status) 133 * m "logical drive <unit>: <text>" (logical device message) 134 * 135 * Messages which are typically suppressed have the first character capitalised. 136 * These messages will only be printed if bootverbose is set. 137 * 138 * The second character in the string indicates an action to be taken as a 139 * result of the event. 140 * 141 * r rescan the device for possible state change 142 * 143 */ 144static struct mly_code_lookup mly_table_event[] = { 145 /* physical device events (0x0000 - 0x007f) */ 146 {"pr online", 0x0001}, 147 {"pr standby", 0x0002}, 148 {"p automatic rebuild started", 0x0005}, 149 {"p manual rebuild started", 0x0006}, 150 {"pr rebuild completed", 0x0007}, 151 {"pr rebuild cancelled", 0x0008}, 152 {"pr rebuild failed for unknown reasons", 0x0009}, 153 {"pr rebuild failed due to new physical device", 0x000a}, 154 {"pr rebuild failed due to logical drive failure", 0x000b}, 155 {"sr offline", 0x000c}, 156 {"pr found", 0x000d}, 157 {"pr gone", 0x000e}, 158 {"p unconfigured", 0x000f}, 159 {"p expand capacity started", 0x0010}, 160 {"pr expand capacity completed", 0x0011}, 161 {"pr expand capacity failed", 0x0012}, 162 {"p parity error", 0x0016}, 163 {"p soft error", 0x0017}, 164 {"p miscellaneous error", 0x0018}, 165 {"p reset", 0x0019}, 166 {"p active spare found", 0x001a}, 167 {"p warm spare found", 0x001b}, 168 {"s sense data received", 0x001c}, 169 {"p initialization started", 0x001d}, 170 {"pr initialization completed", 0x001e}, 171 {"pr initialization failed", 0x001f}, 172 {"pr initialization cancelled", 0x0020}, 173 {"P write recovery failed", 0x0021}, 174 {"p scsi bus reset failed", 0x0022}, 175 {"p double check condition", 0x0023}, 176 {"p device cannot be accessed", 0x0024}, 177 {"p gross error on scsi processor", 0x0025}, 178 {"p bad tag from device", 0x0026}, 179 {"p command timeout", 0x0027}, 180 {"pr system reset", 0x0028}, 181 {"p busy status or parity error", 0x0029}, 182 {"pr host set device to failed state", 0x002a}, 183 {"pr selection timeout", 0x002b}, 184 {"p scsi bus phase error", 0x002c}, 185 {"pr device returned unknown status", 0x002d}, 186 {"pr device not ready", 0x002e}, 187 {"p device not found at startup", 0x002f}, 188 {"p COD write operation failed", 0x0030}, 189 {"p BDT write operation failed", 0x0031}, 190 {"p missing at startup", 0x0039}, 191 {"p start rebuild failed due to physical drive too small", 0x003a}, 192 /* logical device events (0x0080 - 0x00ff) */ 193 {"m consistency check started", 0x0080}, 194 {"mr consistency check completed", 0x0081}, 195 {"mr consistency check cancelled", 0x0082}, 196 {"mr consistency check completed with errors", 0x0083}, 197 {"mr consistency check failed due to logical drive failure", 0x0084}, 198 {"mr consistency check failed due to physical device failure", 0x0085}, 199 {"lr offline", 0x0086}, 200 {"lr critical", 0x0087}, 201 {"lr online", 0x0088}, 202 {"m automatic rebuild started", 0x0089}, 203 {"m manual rebuild started", 0x008a}, 204 {"mr rebuild completed", 0x008b}, 205 {"mr rebuild cancelled", 0x008c}, 206 {"mr rebuild failed for unknown reasons", 0x008d}, 207 {"mr rebuild failed due to new physical device", 0x008e}, 208 {"mr rebuild failed due to logical drive failure", 0x008f}, 209 {"l initialization started", 0x0090}, 210 {"lr initialization completed", 0x0091}, 211 {"lr initialization cancelled", 0x0092}, 212 {"lr initialization failed", 0x0093}, 213 {"lr found", 0x0094}, 214 {"lr gone", 0x0095}, 215 {"l expand capacity started", 0x0096}, 216 {"lr expand capacity completed", 0x0097}, 217 {"lr expand capacity failed", 0x0098}, 218 {"l bad block found", 0x0099}, 219 {"lr size changed", 0x009a}, 220 {"lr type changed", 0x009b}, 221 {"l bad data block found", 0x009c}, 222 {"l read of data block in bdt", 0x009e}, 223 {"l write back data for disk block lost", 0x009f}, 224 /* enclosure management events (0x0100 - 0x017f) */ 225 {"e enclosure %d fan %d failed", 0x0140}, 226 {"e enclosure %d fan %d ok", 0x0141}, 227 {"e enclosure %d fan %d not present", 0x0142}, 228 {"e enclosure %d power supply %d failed", 0x0143}, 229 {"e enclosure %d power supply %d ok", 0x0144}, 230 {"e enclosure %d power supply %d not present", 0x0145}, 231 {"e enclosure %d temperature sensor %d failed", 0x0146}, 232 {"e enclosure %d temperature sensor %d critical", 0x0147}, 233 {"e enclosure %d temperature sensor %d ok", 0x0148}, 234 {"e enclosure %d temperature sensor %d not present", 0x0149}, 235 {"e enclosure %d unit %d access critical", 0x014a}, 236 {"e enclosure %d unit %d access ok", 0x014b}, 237 {"e enclosure %d unit %d access offline", 0x014c}, 238 /* controller events (0x0180 - 0x01ff) */ 239 {"c cache write back error", 0x0181}, 240 {"c battery backup unit found", 0x0188}, 241 {"c battery backup unit charge level low", 0x0189}, 242 {"c battery backup unit charge level ok", 0x018a}, 243 {"c installation aborted", 0x0193}, 244 {"c mirror race recovery in progress", 0x0195}, 245 {"c mirror race on critical drive", 0x0196}, 246 {"c memory soft ecc error", 0x019e}, 247 {"c memory hard ecc error", 0x019f}, 248 {"c battery backup unit failed", 0x01a2}, 249 {NULL, 0}, 250 {"? unknown event code", 0} 251}; 252 253/* 254 * Values here must be 16 characters or less, as they are packed into 255 * the 'product' field in the SCSI inquiry data. 256 */ 257static struct mly_code_lookup mly_table_device_state[] = { 258 {"offline", MLY_DEVICE_STATE_OFFLINE}, 259 {"unconfigured", MLY_DEVICE_STATE_UNCONFIGURED}, 260 {"online", MLY_DEVICE_STATE_ONLINE}, 261 {"critical", MLY_DEVICE_STATE_CRITICAL}, 262 {"writeonly", MLY_DEVICE_STATE_WRITEONLY}, 263 {"standby", MLY_DEVICE_STATE_STANDBY}, 264 {"missing", MLY_DEVICE_STATE_MISSING}, 265 {NULL, 0}, 266 {"unknown state", 0} 267}; 268 269/* 270 * Values here must be 8 characters or less, as they are packed into 271 * the 'vendor' field in the SCSI inquiry data. 272 */ 273static struct mly_code_lookup mly_table_device_type[] = { 274 {"RAID 0", MLY_DEVICE_TYPE_RAID0}, 275 {"RAID 1", MLY_DEVICE_TYPE_RAID1}, 276 {"RAID 3", MLY_DEVICE_TYPE_RAID3}, /* right asymmetric parity */ 277 {"RAID 5", MLY_DEVICE_TYPE_RAID5}, /* right asymmetric parity */ 278 {"RAID 6", MLY_DEVICE_TYPE_RAID6}, /* Mylex RAID 6 */ 279 {"RAID 7", MLY_DEVICE_TYPE_RAID7}, /* JBOD */ 280 {"SPAN", MLY_DEVICE_TYPE_NEWSPAN}, /* New Mylex SPAN */ 281 {"RAID 3", MLY_DEVICE_TYPE_RAID3F}, /* fixed parity */ 282 {"RAID 3", MLY_DEVICE_TYPE_RAID3L}, /* left symmetric parity */ 283 {"SPAN", MLY_DEVICE_TYPE_SPAN}, /* current spanning implementation */ 284 {"RAID 5", MLY_DEVICE_TYPE_RAID5L}, /* left symmetric parity */ 285 {"RAID E", MLY_DEVICE_TYPE_RAIDE}, /* concatenation */ 286 {"PHYSICAL", MLY_DEVICE_TYPE_PHYSICAL}, /* physical device */ 287 {NULL, 0}, 288 {"UNKNOWN", 0} 289}; 290 291#if 0 292static struct mly_code_lookup mly_table_stripe_size[] = { 293 {"NONE", MLY_STRIPE_ZERO}, 294 {"512B", MLY_STRIPE_512b}, 295 {"1k", MLY_STRIPE_1k}, 296 {"2k", MLY_STRIPE_2k}, 297 {"4k", MLY_STRIPE_4k}, 298 {"8k", MLY_STRIPE_8k}, 299 {"16k", MLY_STRIPE_16k}, 300 {"32k", MLY_STRIPE_32k}, 301 {"64k", MLY_STRIPE_64k}, 302 {"128k", MLY_STRIPE_128k}, 303 {"256k", MLY_STRIPE_256k}, 304 {"512k", MLY_STRIPE_512k}, 305 {"1M", MLY_STRIPE_1m}, 306 {NULL, 0}, 307 {"unknown", 0} 308}; 309 310static struct mly_code_lookup mly_table_cacheline_size[] = { 311 {"NONE", MLY_CACHELINE_ZERO}, 312 {"512B", MLY_CACHELINE_512b}, 313 {"1k", MLY_CACHELINE_1k}, 314 {"2k", MLY_CACHELINE_2k}, 315 {"4k", MLY_CACHELINE_4k}, 316 {"8k", MLY_CACHELINE_8k}, 317 {"16k", MLY_CACHELINE_16k}, 318 {"32k", MLY_CACHELINE_32k}, 319 {"64k", MLY_CACHELINE_64k}, 320 {NULL, 0}, 321 {"unknown", 0} 322}; 323#endif 324