if_an_pci.c revision 92739
1/* 2 * Copyright (c) 1997, 1998, 1999 3 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 * $FreeBSD: head/sys/dev/an/if_an_pci.c 92739 2002-03-20 02:08:01Z alfred $ 33 */ 34 35/* 36 * This is a PCI shim for the Aironet PC4500/4800 wireless network 37 * driver. Aironet makes PCMCIA, ISA and PCI versions of these devices, 38 * which all have basically the same interface. The ISA and PCI cards 39 * are actually bridge adapters with PCMCIA cards inserted into them, 40 * however they appear as normal PCI or ISA devices to the host. 41 * 42 * All we do here is handle the PCI probe and attach and set up an 43 * interrupt handler entry point. The PCI version of the card uses 44 * a PLX 9050 PCI to "dumb bus" bridge chip, which provides us with 45 * multiple PCI address space mappings. The primary mapping at PCI 46 * register 0x14 is for the PLX chip itself, *NOT* the Aironet card. 47 * The I/O address of the Aironet is actually at register 0x18, which 48 * is the local bus mapping register for bus space 0. There are also 49 * registers for additional register spaces at registers 0x1C and 50 * 0x20, but these are unused in the Aironet devices. To find out 51 * more, you need a datasheet for the 9050 from PLX, but you have 52 * to go through their sales office to get it. Bleh. 53 */ 54 55#include "opt_inet.h" 56 57#ifdef INET 58#define ANCACHE 59#endif 60 61#include <sys/param.h> 62#include <sys/systm.h> 63#include <sys/sockio.h> 64#include <sys/mbuf.h> 65#include <sys/kernel.h> 66#include <sys/socket.h> 67 68#include <sys/module.h> 69#include <sys/bus.h> 70#include <machine/bus.h> 71#include <sys/rman.h> 72#include <sys/lock.h> 73#include <sys/mutex.h> 74#include <machine/resource.h> 75 76#include <net/if.h> 77#include <net/if_arp.h> 78#include <net/ethernet.h> 79#include <net/if_dl.h> 80#include <net/if_media.h> 81 82#include <pci/pcireg.h> 83#include <pci/pcivar.h> 84 85#ifndef lint 86static const char rcsid[] = 87 "$FreeBSD: head/sys/dev/an/if_an_pci.c 92739 2002-03-20 02:08:01Z alfred $"; 88#endif 89 90#include <dev/an/if_aironet_ieee.h> 91#include <dev/an/if_anreg.h> 92 93struct an_type { 94 u_int16_t an_vid; 95 u_int16_t an_did; 96 char *an_name; 97}; 98 99#define AIRONET_VENDORID 0x14B9 100#define AIRONET_DEVICEID_35x 0x0350 101#define AIRONET_DEVICEID_4500 0x4500 102#define AIRONET_DEVICEID_4800 0x4800 103#define AIRONET_DEVICEID_4xxx 0x0001 104#define AN_PCI_PLX_LOIO 0x14 /* PLX chip iobase */ 105#define AN_PCI_LOIO 0x18 /* Aironet iobase */ 106 107static struct an_type an_devs[] = { 108 { AIRONET_VENDORID, AIRONET_DEVICEID_35x, "Cisco Aironet 350 Series" }, 109 { AIRONET_VENDORID, AIRONET_DEVICEID_4500, "Aironet PCI4500" }, 110 { AIRONET_VENDORID, AIRONET_DEVICEID_4800, "Aironet PCI4800" }, 111 { AIRONET_VENDORID, AIRONET_DEVICEID_4xxx, "Aironet PCI4500/PCI4800" }, 112 { 0, 0, NULL } 113}; 114 115static int an_probe_pci (device_t); 116static int an_attach_pci (device_t); 117static int an_detach_pci (device_t); 118 119static int 120an_probe_pci(device_t dev) 121{ 122 struct an_type *t; 123 124 t = an_devs; 125 126 while (t->an_name != NULL) { 127 if (pci_get_vendor(dev) == t->an_vid && 128 pci_get_device(dev) == t->an_did) { 129 device_set_desc(dev, t->an_name); 130 return(0); 131 } 132 t++; 133 } 134 135 return(ENXIO); 136} 137 138static int 139an_attach_pci(dev) 140 device_t dev; 141{ 142 u_int32_t command; 143 struct an_softc *sc; 144 int unit, flags, error = 0; 145 146 sc = device_get_softc(dev); 147 unit = device_get_unit(dev); 148 flags = device_get_flags(dev); 149 bzero(sc, sizeof(struct an_softc)); 150 151 /* 152 * Map control/status registers. 153 */ 154 command = pci_read_config(dev, PCIR_COMMAND, 4); 155 command |= PCIM_CMD_PORTEN; 156 pci_write_config(dev, PCIR_COMMAND, command, 4); 157 command = pci_read_config(dev, PCIR_COMMAND, 4); 158 159 if (!(command & PCIM_CMD_PORTEN)) { 160 printf("an%d: failed to enable I/O ports!\n", unit); 161 error = ENXIO; 162 goto fail; 163 } 164 165 sc->port_rid = AN_PCI_LOIO; 166 error = an_alloc_port(dev, sc->port_rid, 1); 167 168 if (error) { 169 printf("an%d: couldn't map ports\n", unit); 170 goto fail; 171 } 172 173 sc->an_btag = rman_get_bustag(sc->port_res); 174 sc->an_bhandle = rman_get_bushandle(sc->port_res); 175 176 /* Allocate interrupt */ 177 error = an_alloc_irq(dev, 0, RF_SHAREABLE); 178 if (error) { 179 an_release_resources(dev); 180 goto fail; 181 } 182 183 error = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_NET, 184 an_intr, sc, &sc->irq_handle); 185 if (error) { 186 an_release_resources(dev); 187 goto fail; 188 } 189 190 sc->an_dev = dev; 191 error = an_attach(sc, device_get_unit(dev), flags); 192 193fail: 194 return(error); 195} 196 197static int 198an_detach_pci(device_t dev) 199{ 200 struct an_softc *sc = device_get_softc(dev); 201 struct ifnet *ifp = &sc->arpcom.ac_if; 202 203 an_stop(sc); 204 ifmedia_removeall(&sc->an_ifmedia); 205 ether_ifdetach(ifp, ETHER_BPF_SUPPORTED); 206 bus_teardown_intr(dev, sc->irq_res, sc->irq_handle); 207 an_release_resources(dev); 208 209 return (0); 210} 211 212static device_method_t an_pci_methods[] = { 213 /* Device interface */ 214 DEVMETHOD(device_probe, an_probe_pci), 215 DEVMETHOD(device_attach, an_attach_pci), 216 DEVMETHOD(device_detach, an_detach_pci), 217 DEVMETHOD(device_shutdown, an_shutdown), 218 { 0, 0 } 219}; 220 221static driver_t an_pci_driver = { 222 "an", 223 an_pci_methods, 224 sizeof(struct an_softc), 225}; 226 227static devclass_t an_devclass; 228 229DRIVER_MODULE(if_an, pci, an_pci_driver, an_devclass, 0, 0); 230