adwlib.c revision 59082
1/* 2 * Low level routines for Second Generation 3 * Advanced Systems Inc. SCSI controllers chips 4 * 5 * Copyright (c) 1998, 1999, 2000 Justin Gibbs. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions, and the following disclaimer, 13 * without modification. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. The name of the author may not be used to endorse or promote products 18 * derived from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 24 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 30 * SUCH DAMAGE. 31 * 32 * $FreeBSD: head/sys/dev/advansys/adwlib.c 59082 2000-04-07 11:32:42Z nyan $ 33 */ 34/* 35 * Ported from: 36 * advansys.c - Linux Host Driver for AdvanSys SCSI Adapters 37 * 38 * Copyright (c) 1995-1998 Advanced System Products, Inc. 39 * All Rights Reserved. 40 * 41 * Redistribution and use in source and binary forms, with or without 42 * modification, are permitted provided that redistributions of source 43 * code retain the above copyright notice and this comment without 44 * modification. 45 */ 46 47#include <sys/param.h> 48#include <sys/systm.h> 49#include <sys/bus.h> 50 51#include <machine/bus_pio.h> 52#include <machine/bus_memio.h> 53#include <machine/bus.h> 54#include <machine/clock.h> 55 56#include <cam/cam.h> 57#include <cam/cam_ccb.h> 58#include <cam/cam_sim.h> 59#include <cam/cam_xpt_sim.h> 60#include <cam/scsi/scsi_all.h> 61 62#include <dev/advansys/adwlib.h> 63 64const struct adw_eeprom adw_asc3550_default_eeprom = 65{ 66 ADW_EEPROM_BIOS_ENABLE, /* cfg_lsw */ 67 0x0000, /* cfg_msw */ 68 0xFFFF, /* disc_enable */ 69 0xFFFF, /* wdtr_able */ 70 { 0xFFFF }, /* sdtr_able */ 71 0xFFFF, /* start_motor */ 72 0xFFFF, /* tagqng_able */ 73 0xFFFF, /* bios_scan */ 74 0, /* scam_tolerant */ 75 7, /* adapter_scsi_id */ 76 0, /* bios_boot_delay */ 77 3, /* scsi_reset_delay */ 78 0, /* bios_id_lun */ 79 0, /* termination */ 80 0, /* reserved1 */ 81 0xFFE7, /* bios_ctrl */ 82 { 0xFFFF }, /* ultra_able */ 83 { 0 }, /* reserved2 */ 84 ADW_DEF_MAX_HOST_QNG, /* max_host_qng */ 85 ADW_DEF_MAX_DVC_QNG, /* max_dvc_qng */ 86 0, /* dvc_cntl */ 87 { 0 }, /* bug_fix */ 88 { 0, 0, 0 }, /* serial_number */ 89 0, /* check_sum */ 90 { /* oem_name[16] */ 91 0, 0, 0, 0, 0, 0, 0, 0, 92 0, 0, 0, 0, 0, 0, 0, 0 93 }, 94 0, /* dvc_err_code */ 95 0, /* adv_err_code */ 96 0, /* adv_err_addr */ 97 0, /* saved_dvc_err_code */ 98 0, /* saved_adv_err_code */ 99 0 /* saved_adv_err_addr */ 100}; 101 102const struct adw_eeprom adw_asc38C0800_default_eeprom = 103{ 104 ADW_EEPROM_BIOS_ENABLE, /* 00 cfg_lsw */ 105 0x0000, /* 01 cfg_msw */ 106 0xFFFF, /* 02 disc_enable */ 107 0xFFFF, /* 03 wdtr_able */ 108 { 0x4444 }, /* 04 sdtr_speed1 */ 109 0xFFFF, /* 05 start_motor */ 110 0xFFFF, /* 06 tagqng_able */ 111 0xFFFF, /* 07 bios_scan */ 112 0, /* 08 scam_tolerant */ 113 7, /* 09 adapter_scsi_id */ 114 0, /* bios_boot_delay */ 115 3, /* 10 scsi_reset_delay */ 116 0, /* bios_id_lun */ 117 0, /* 11 termination_se */ 118 0, /* termination_lvd */ 119 0xFFE7, /* 12 bios_ctrl */ 120 { 0x4444 }, /* 13 sdtr_speed2 */ 121 { 0x4444 }, /* 14 sdtr_speed3 */ 122 ADW_DEF_MAX_HOST_QNG, /* 15 max_host_qng */ 123 ADW_DEF_MAX_DVC_QNG, /* max_dvc_qng */ 124 0, /* 16 dvc_cntl */ 125 { 0x4444 } , /* 17 sdtr_speed4 */ 126 { 0, 0, 0 }, /* 18-20 serial_number */ 127 0, /* 21 check_sum */ 128 { /* 22-29 oem_name[16] */ 129 0, 0, 0, 0, 0, 0, 0, 0, 130 0, 0, 0, 0, 0, 0, 0, 0 131 }, 132 0, /* 30 dvc_err_code */ 133 0, /* 31 adv_err_code */ 134 0, /* 32 adv_err_addr */ 135 0, /* 33 saved_dvc_err_code */ 136 0, /* 34 saved_adv_err_code */ 137 0, /* 35 saved_adv_err_addr */ 138 { /* 36 - 55 reserved */ 139 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 140 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 141 }, 142 0, /* 56 cisptr_lsw */ 143 0, /* 57 cisprt_msw */ 144 /* 58-59 sub-id */ 145 (PCI_ID_ADVANSYS_38C0800_REV1 & PCI_ID_DEV_VENDOR_MASK) >> 32, 146}; 147 148#define ADW_MC_SDTR_OFFSET_ULTRA2_DT 0 149#define ADW_MC_SDTR_OFFSET_ULTRA2 1 150#define ADW_MC_SDTR_OFFSET_ULTRA 2 151const struct adw_syncrate adw_syncrates[] = 152{ 153 /* mc_sdtr period rate */ 154 { ADW_MC_SDTR_80, 9, "80.0" }, 155 { ADW_MC_SDTR_40, 10, "40.0" }, 156 { ADW_MC_SDTR_20, 12, "20.0" }, 157 { ADW_MC_SDTR_10, 25, "10.0" }, 158 { ADW_MC_SDTR_5, 50, "5.0" }, 159 { ADW_MC_SDTR_ASYNC, 0, "async" } 160}; 161 162const int adw_num_syncrates = sizeof(adw_syncrates) / sizeof(adw_syncrates[0]); 163 164static u_int16_t adw_eeprom_read_16(struct adw_softc *adw, int addr); 165static void adw_eeprom_write_16(struct adw_softc *adw, int addr, 166 u_int data); 167static void adw_eeprom_wait(struct adw_softc *adw); 168 169int 170adw_find_signature(struct adw_softc *adw) 171{ 172 if (adw_inb(adw, ADW_SIGNATURE_BYTE) == ADW_CHIP_ID_BYTE 173 && adw_inw(adw, ADW_SIGNATURE_WORD) == ADW_CHIP_ID_WORD) 174 return (1); 175 return (0); 176} 177 178/* 179 * Reset Chip. 180 */ 181void 182adw_reset_chip(struct adw_softc *adw) 183{ 184 adw_outw(adw, ADW_CTRL_REG, ADW_CTRL_REG_CMD_RESET); 185 DELAY(1000 * 100); 186 adw_outw(adw, ADW_CTRL_REG, ADW_CTRL_REG_CMD_WR_IO_REG); 187 188 /* 189 * Initialize Chip registers. 190 */ 191 adw_outw(adw, ADW_SCSI_CFG1, 192 adw_inw(adw, ADW_SCSI_CFG1) & ~ADW_SCSI_CFG1_BIG_ENDIAN); 193} 194 195/* 196 * Reset the SCSI bus. 197 */ 198int 199adw_reset_bus(struct adw_softc *adw) 200{ 201 adw_idle_cmd_status_t status; 202 203 status = 204 adw_idle_cmd_send(adw, ADW_IDLE_CMD_SCSI_RESET_START, /*param*/0); 205 if (status != ADW_IDLE_CMD_SUCCESS) { 206 xpt_print_path(adw->path); 207 printf("Bus Reset start attempt failed\n"); 208 return (1); 209 } 210 DELAY(ADW_BUS_RESET_HOLD_DELAY_US); 211 status = 212 adw_idle_cmd_send(adw, ADW_IDLE_CMD_SCSI_RESET_END, /*param*/0); 213 if (status != ADW_IDLE_CMD_SUCCESS) { 214 xpt_print_path(adw->path); 215 printf("Bus Reset end attempt failed\n"); 216 return (1); 217 } 218 return (0); 219} 220 221/* 222 * Read the specified EEPROM location 223 */ 224static u_int16_t 225adw_eeprom_read_16(struct adw_softc *adw, int addr) 226{ 227 adw_outw(adw, ADW_EEP_CMD, ADW_EEP_CMD_READ | addr); 228 adw_eeprom_wait(adw); 229 return (adw_inw(adw, ADW_EEP_DATA)); 230} 231 232static void 233adw_eeprom_write_16(struct adw_softc *adw, int addr, u_int data) 234{ 235 adw_outw(adw, ADW_EEP_DATA, data); 236 adw_outw(adw, ADW_EEP_CMD, ADW_EEP_CMD_WRITE | addr); 237 adw_eeprom_wait(adw); 238} 239 240/* 241 * Wait for and EEPROM command to complete 242 */ 243static void 244adw_eeprom_wait(struct adw_softc *adw) 245{ 246 int i; 247 248 for (i = 0; i < ADW_EEP_DELAY_MS; i++) { 249 if ((adw_inw(adw, ADW_EEP_CMD) & ADW_EEP_CMD_DONE) != 0) 250 break; 251 DELAY(1000); 252 } 253 if (i == ADW_EEP_DELAY_MS) 254 panic("%s: Timedout Reading EEPROM", adw_name(adw)); 255} 256 257/* 258 * Read EEPROM configuration into the specified buffer. 259 * 260 * Return a checksum based on the EEPROM configuration read. 261 */ 262u_int16_t 263adw_eeprom_read(struct adw_softc *adw, struct adw_eeprom *eep_buf) 264{ 265 u_int16_t *wbuf; 266 u_int16_t wval; 267 u_int16_t chksum; 268 int eep_addr; 269 270 wbuf = (u_int16_t *)eep_buf; 271 chksum = 0; 272 273 for (eep_addr = ADW_EEP_DVC_CFG_BEGIN; 274 eep_addr < ADW_EEP_DVC_CFG_END; 275 eep_addr++, wbuf++) { 276 wval = adw_eeprom_read_16(adw, eep_addr); 277 chksum += wval; 278 *wbuf = wval; 279 } 280 281 /* checksum field is not counted in the checksum */ 282 *wbuf = adw_eeprom_read_16(adw, eep_addr); 283 wbuf++; 284 285 /* Driver seeprom variables are not included in the checksum */ 286 for (eep_addr = ADW_EEP_DVC_CTL_BEGIN; 287 eep_addr < ADW_EEP_MAX_WORD_ADDR; 288 eep_addr++, wbuf++) 289 *wbuf = adw_eeprom_read_16(adw, eep_addr); 290 291 return (chksum); 292} 293 294void 295adw_eeprom_write(struct adw_softc *adw, struct adw_eeprom *eep_buf) 296{ 297 u_int16_t *wbuf; 298 u_int16_t addr; 299 u_int16_t chksum; 300 301 wbuf = (u_int16_t *)eep_buf; 302 chksum = 0; 303 304 adw_outw(adw, ADW_EEP_CMD, ADW_EEP_CMD_WRITE_ABLE); 305 adw_eeprom_wait(adw); 306 307 /* 308 * Write EEPROM until checksum. 309 */ 310 for (addr = ADW_EEP_DVC_CFG_BEGIN; 311 addr < ADW_EEP_DVC_CFG_END; addr++, wbuf++) { 312 chksum += *wbuf; 313 adw_eeprom_write_16(adw, addr, *wbuf); 314 } 315 316 /* 317 * Write calculated EEPROM checksum 318 */ 319 adw_eeprom_write_16(adw, addr, chksum); 320 321 /* skip over buffer's checksum */ 322 wbuf++; 323 324 /* 325 * Write the rest. 326 */ 327 for (addr = ADW_EEP_DVC_CTL_BEGIN; 328 addr < ADW_EEP_MAX_WORD_ADDR; addr++, wbuf++) 329 adw_eeprom_write_16(adw, addr, *wbuf); 330 331 adw_outw(adw, ADW_EEP_CMD, ADW_EEP_CMD_WRITE_DISABLE); 332 adw_eeprom_wait(adw); 333} 334 335int 336adw_init_chip(struct adw_softc *adw, u_int term_scsicfg1) 337{ 338 u_int8_t biosmem[ADW_MC_BIOSLEN]; 339 const u_int16_t *word_table; 340 const u_int8_t *byte_codes; 341 const u_int8_t *byte_codes_end; 342 u_int bios_sig; 343 u_int bytes_downloaded; 344 u_int addr; 345 u_int end_addr; 346 u_int checksum; 347 u_int scsicfg1; 348 u_int tid; 349 350 /* 351 * Save the RISC memory BIOS region before writing the microcode. 352 * The BIOS may already be loaded and using its RISC LRAM region 353 * so its region must be saved and restored. 354 */ 355 for (addr = 0; addr < ADW_MC_BIOSLEN; addr++) 356 biosmem[addr] = adw_lram_read_8(adw, ADW_MC_BIOSMEM + addr); 357 358 /* 359 * Save current per TID negotiated values if the BIOS has been 360 * loaded (BIOS signature is present). These will be used if 361 * we cannot get information from the EEPROM. 362 */ 363 addr = ADW_MC_BIOS_SIGNATURE - ADW_MC_BIOSMEM; 364 bios_sig = biosmem[addr] 365 | (biosmem[addr + 1] << 8); 366 if (bios_sig == 0x55AA 367 && (adw->flags & ADW_EEPROM_FAILED) != 0) { 368 u_int major_ver; 369 u_int minor_ver; 370 u_int sdtr_able; 371 372 addr = ADW_MC_BIOS_VERSION - ADW_MC_BIOSMEM; 373 minor_ver = biosmem[addr + 1] & 0xF; 374 major_ver = (biosmem[addr + 1] >> 4) & 0xF; 375 if ((adw->chip == ADW_CHIP_ASC3550) 376 && (major_ver <= 3 377 || (major_ver == 3 && minor_ver == 1))) { 378 /* 379 * BIOS 3.1 and earlier location of 380 * 'wdtr_able' variable. 381 */ 382 adw->user_wdtr = 383 adw_lram_read_16(adw, ADW_MC_WDTR_ABLE_BIOS_31); 384 } else { 385 adw->user_wdtr = 386 adw_lram_read_16(adw, ADW_MC_WDTR_ABLE); 387 } 388 sdtr_able = adw_lram_read_16(adw, ADW_MC_SDTR_ABLE); 389 for (tid = 0; tid < ADW_MAX_TID; tid++) { 390 u_int tid_mask; 391 u_int mc_sdtr; 392 393 tid_mask = 0x1 << tid; 394 if ((sdtr_able & tid_mask) == 0) 395 mc_sdtr = ADW_MC_SDTR_ASYNC; 396 else if ((adw->features & ADW_DT) != 0) 397 mc_sdtr = ADW_MC_SDTR_80; 398 else if ((adw->features & ADW_ULTRA2) != 0) 399 mc_sdtr = ADW_MC_SDTR_40; 400 else 401 mc_sdtr = ADW_MC_SDTR_20; 402 adw_set_user_sdtr(adw, tid, mc_sdtr); 403 } 404 adw->user_tagenb = adw_lram_read_16(adw, ADW_MC_TAGQNG_ABLE); 405 } 406 407 /* 408 * Load the Microcode. 409 * 410 * Assume the following compressed format of the microcode buffer: 411 * 412 * 253 word (506 byte) table indexed by byte code followed 413 * by the following byte codes: 414 * 415 * 1-Byte Code: 416 * 00: Emit word 0 in table. 417 * 01: Emit word 1 in table. 418 * . 419 * FD: Emit word 253 in table. 420 * 421 * Multi-Byte Code: 422 * FD RESEVED 423 * 424 * FE WW WW: (3 byte code) 425 * Word to emit is the next word WW WW. 426 * FF BB WW WW: (4 byte code) 427 * Emit BB count times next word WW WW. 428 * 429 */ 430 bytes_downloaded = 0; 431 word_table = (const u_int16_t *)adw->mcode_data->mcode_buf; 432 byte_codes = (const u_int8_t *)&word_table[253]; 433 byte_codes_end = adw->mcode_data->mcode_buf 434 + adw->mcode_data->mcode_size; 435 adw_outw(adw, ADW_RAM_ADDR, 0); 436 while (byte_codes < byte_codes_end) { 437 if (*byte_codes == 0xFF) { 438 u_int16_t value; 439 440 value = byte_codes[2] 441 | byte_codes[3] << 8; 442 adw_set_multi_2(adw, ADW_RAM_DATA, 443 value, byte_codes[1]); 444 bytes_downloaded += byte_codes[1]; 445 byte_codes += 4; 446 } else if (*byte_codes == 0xFE) { 447 u_int16_t value; 448 449 value = byte_codes[1] 450 | byte_codes[2] << 8; 451 adw_outw(adw, ADW_RAM_DATA, value); 452 bytes_downloaded++; 453 byte_codes += 3; 454 } else { 455 adw_outw(adw, ADW_RAM_DATA, word_table[*byte_codes]); 456 bytes_downloaded++; 457 byte_codes++; 458 } 459 } 460 /* Convert from words to bytes */ 461 bytes_downloaded *= 2; 462 463 /* 464 * Clear the rest of LRAM. 465 */ 466 for (addr = bytes_downloaded; addr < adw->memsize; addr += 2) 467 adw_outw(adw, ADW_RAM_DATA, 0); 468 469 /* 470 * Verify the microcode checksum. 471 */ 472 checksum = 0; 473 adw_outw(adw, ADW_RAM_ADDR, 0); 474 for (addr = 0; addr < bytes_downloaded; addr += 2) 475 checksum += adw_inw(adw, ADW_RAM_DATA); 476 477 if (checksum != adw->mcode_data->mcode_chksum) { 478 printf("%s: Firmware load failed!\n", adw_name(adw)); 479 return (EIO); 480 } 481 482 /* 483 * Restore the RISC memory BIOS region. 484 */ 485 for (addr = 0; addr < ADW_MC_BIOSLEN; addr++) 486 adw_lram_write_8(adw, addr + ADW_MC_BIOSLEN, biosmem[addr]); 487 488 /* 489 * Calculate and write the microcode code checksum to 490 * the microcode code checksum location. 491 */ 492 addr = adw_lram_read_16(adw, ADW_MC_CODE_BEGIN_ADDR); 493 end_addr = adw_lram_read_16(adw, ADW_MC_CODE_END_ADDR); 494 checksum = 0; 495 adw_outw(adw, ADW_RAM_ADDR, addr); 496 for (; addr < end_addr; addr += 2) 497 checksum += adw_inw(adw, ADW_RAM_DATA); 498 adw_lram_write_16(adw, ADW_MC_CODE_CHK_SUM, checksum); 499 500 /* 501 * Tell the microcode what kind of chip it's running on. 502 */ 503 adw_lram_write_16(adw, ADW_MC_CHIP_TYPE, adw->chip); 504 505 /* 506 * Leave WDTR and SDTR negotiation disabled until the XPT has 507 * informed us of device capabilities, but do set the desired 508 * user rates in case we receive an SDTR request from the target 509 * before we negotiate. We turn on tagged queuing at the microcode 510 * level for all devices, and modulate this on a per command basis. 511 */ 512 adw_lram_write_16(adw, ADW_MC_SDTR_SPEED1, adw->user_sdtr[0]); 513 adw_lram_write_16(adw, ADW_MC_SDTR_SPEED2, adw->user_sdtr[1]); 514 adw_lram_write_16(adw, ADW_MC_SDTR_SPEED3, adw->user_sdtr[2]); 515 adw_lram_write_16(adw, ADW_MC_SDTR_SPEED4, adw->user_sdtr[3]); 516 adw_lram_write_16(adw, ADW_MC_DISC_ENABLE, adw->user_discenb); 517 for (tid = 0; tid < ADW_MAX_TID; tid++) { 518 /* Cam limits the maximum number of commands for us */ 519 adw_lram_write_8(adw, ADW_MC_NUMBER_OF_MAX_CMD + tid, 520 adw->max_acbs); 521 } 522 adw_lram_write_16(adw, ADW_MC_TAGQNG_ABLE, ~0); 523 524 /* 525 * Set SCSI_CFG0 Microcode Default Value. 526 * 527 * The microcode will set the SCSI_CFG0 register using this value 528 * after it is started. 529 */ 530 adw_lram_write_16(adw, ADW_MC_DEFAULT_SCSI_CFG0, 531 ADW_SCSI_CFG0_PARITY_EN|ADW_SCSI_CFG0_SEL_TMO_LONG| 532 ADW_SCSI_CFG0_OUR_ID_EN|adw->initiator_id); 533 534 /* 535 * Tell the MC about the memory size that 536 * was setup by the probe code. 537 */ 538 adw_lram_write_16(adw, ADW_MC_DEFAULT_MEM_CFG, 539 adw_inb(adw, ADW_MEM_CFG) & ADW_MEM_CFG_RAM_SZ_MASK); 540 541 /* 542 * Determine SCSI_CFG1 Microcode Default Value. 543 * 544 * The microcode will set the SCSI_CFG1 register using this value 545 * after it is started below. 546 */ 547 scsicfg1 = adw_inw(adw, ADW_SCSI_CFG1); 548 549 /* 550 * If the internal narrow cable is reversed all of the SCSI_CTRL 551 * register signals will be set. Check for and return an error if 552 * this condition is found. 553 */ 554 if ((adw_inw(adw, ADW_SCSI_CTRL) & 0x3F07) == 0x3F07) { 555 printf("%s: Illegal Cable Config!\n", adw_name(adw)); 556 printf("%s: Internal cable is reversed!\n", adw_name(adw)); 557 return (EIO); 558 } 559 560 /* 561 * If this is a differential board and a single-ended device 562 * is attached to one of the connectors, return an error. 563 */ 564 if ((adw->features & ADW_ULTRA) != 0) { 565 if ((scsicfg1 & ADW_SCSI_CFG1_DIFF_MODE) != 0 566 && (scsicfg1 & ADW_SCSI_CFG1_DIFF_SENSE) == 0) { 567 printf("%s: A Single Ended Device is attached to our " 568 "differential bus!\n", adw_name(adw)); 569 return (EIO); 570 } 571 } else { 572 if ((scsicfg1 & ADW2_SCSI_CFG1_DEV_DETECT_HVD) != 0) { 573 printf("%s: A High Voltage Differential Device " 574 "is attached to this controller.\n", 575 adw_name(adw)); 576 printf("%s: HVD devices are not supported.\n", 577 adw_name(adw)); 578 return (EIO); 579 } 580 } 581 582 /* 583 * Perform automatic termination control if desired. 584 */ 585 if ((adw->features & ADW_ULTRA2) != 0) { 586 u_int cable_det; 587 588 /* 589 * Ultra2 Chips require termination disabled to 590 * detect cable presence. 591 */ 592 adw_outw(adw, ADW_SCSI_CFG1, 593 scsicfg1 | ADW2_SCSI_CFG1_DIS_TERM_DRV); 594 cable_det = adw_inw(adw, ADW_SCSI_CFG1); 595 adw_outw(adw, ADW_SCSI_CFG1, scsicfg1); 596 597 /* SE Termination first if auto-term has been specified */ 598 if ((term_scsicfg1 & ADW_SCSI_CFG1_TERM_CTL_MASK) == 0) { 599 600 /* 601 * For all SE cable configurations, high byte 602 * termination is enabled. 603 */ 604 term_scsicfg1 |= ADW_SCSI_CFG1_TERM_CTL_H; 605 if ((cable_det & ADW_SCSI_CFG1_INT8_MASK) != 0 606 || (cable_det & ADW_SCSI_CFG1_INT16_MASK) != 0) { 607 /* 608 * If either cable is not present, the 609 * low byte must be terminated as well. 610 */ 611 term_scsicfg1 |= ADW_SCSI_CFG1_TERM_CTL_L; 612 } 613 } 614 615 /* LVD auto-term */ 616 if ((term_scsicfg1 & ADW2_SCSI_CFG1_TERM_CTL_LVD) == 0 617 && (term_scsicfg1 & ADW2_SCSI_CFG1_DIS_TERM_DRV) == 0) { 618 /* 619 * If both cables are installed, termination 620 * is disabled. Otherwise it is enabled. 621 */ 622 if ((cable_det & ADW2_SCSI_CFG1_EXTLVD_MASK) != 0 623 || (cable_det & ADW2_SCSI_CFG1_INTLVD_MASK) != 0) { 624 625 term_scsicfg1 |= ADW2_SCSI_CFG1_TERM_CTL_LVD; 626 } 627 } 628 term_scsicfg1 &= ~ADW2_SCSI_CFG1_DIS_TERM_DRV; 629 } else { 630 /* Ultra Controller Termination */ 631 if ((term_scsicfg1 & ADW_SCSI_CFG1_TERM_CTL_MASK) == 0) { 632 int cable_count; 633 int wide_cable_count; 634 635 cable_count = 0; 636 wide_cable_count = 0; 637 if ((scsicfg1 & ADW_SCSI_CFG1_INT16_MASK) == 0) { 638 cable_count++; 639 wide_cable_count++; 640 } 641 if ((scsicfg1 & ADW_SCSI_CFG1_INT8_MASK) == 0) 642 cable_count++; 643 644 /* There is only one external port */ 645 if ((scsicfg1 & ADW_SCSI_CFG1_EXT16_MASK) == 0) { 646 cable_count++; 647 wide_cable_count++; 648 } else if ((scsicfg1 & ADW_SCSI_CFG1_EXT8_MASK) == 0) 649 cable_count++; 650 651 if (cable_count == 3) { 652 printf("%s: Illegal Cable Config!\n", 653 adw_name(adw)); 654 printf("%s: Only Two Ports may be used at " 655 "a time!\n", adw_name(adw)); 656 } else if (cable_count <= 1) { 657 /* 658 * At least two out of three cables missing. 659 * Terminate both bytes. 660 */ 661 term_scsicfg1 |= ADW_SCSI_CFG1_TERM_CTL_H 662 | ADW_SCSI_CFG1_TERM_CTL_L; 663 } else if (wide_cable_count <= 1) { 664 /* No two 16bit cables present. High on. */ 665 term_scsicfg1 |= ADW_SCSI_CFG1_TERM_CTL_H; 666 } 667 } 668 } 669 670 /* Tell the user about our decission */ 671 switch (term_scsicfg1 & ADW_SCSI_CFG1_TERM_CTL_MASK) { 672 case ADW_SCSI_CFG1_TERM_CTL_MASK: 673 printf("High & Low SE Term Enabled, "); 674 break; 675 case ADW_SCSI_CFG1_TERM_CTL_H: 676 printf("High SE Termination Enabled, "); 677 break; 678 case ADW_SCSI_CFG1_TERM_CTL_L: 679 printf("Low SE Term Enabled, "); 680 break; 681 default: 682 break; 683 } 684 685 if ((adw->features & ADW_ULTRA2) != 0 686 && (term_scsicfg1 & ADW2_SCSI_CFG1_TERM_CTL_LVD) != 0) 687 printf("LVD Term Enabled, "); 688 689 /* 690 * Invert the TERM_CTL_H and TERM_CTL_L bits and then 691 * set 'scsicfg1'. The TERM_POL bit does not need to be 692 * referenced, because the hardware internally inverts 693 * the Termination High and Low bits if TERM_POL is set. 694 */ 695 if ((adw->features & ADW_ULTRA2) != 0) { 696 term_scsicfg1 = ~term_scsicfg1; 697 term_scsicfg1 &= ADW_SCSI_CFG1_TERM_CTL_MASK 698 | ADW2_SCSI_CFG1_TERM_CTL_LVD; 699 scsicfg1 &= ~(ADW_SCSI_CFG1_TERM_CTL_MASK 700 |ADW2_SCSI_CFG1_TERM_CTL_LVD 701 |ADW_SCSI_CFG1_BIG_ENDIAN 702 |ADW_SCSI_CFG1_TERM_POL 703 |ADW2_SCSI_CFG1_DEV_DETECT); 704 scsicfg1 |= term_scsicfg1; 705 } else { 706 term_scsicfg1 = ~term_scsicfg1 & ADW_SCSI_CFG1_TERM_CTL_MASK; 707 scsicfg1 &= ~ADW_SCSI_CFG1_TERM_CTL_MASK; 708 scsicfg1 |= term_scsicfg1 | ADW_SCSI_CFG1_TERM_CTL_MANUAL; 709 scsicfg1 |= ADW_SCSI_CFG1_FLTR_DISABLE; 710 } 711 712 /* 713 * Set SCSI_CFG1 Microcode Default Value 714 * 715 * The microcode will set the SCSI_CFG1 register using this value 716 * after it is started below. 717 */ 718 adw_lram_write_16(adw, ADW_MC_DEFAULT_SCSI_CFG1, scsicfg1); 719 720 /* 721 * Only accept selections on our initiator target id. 722 * This may change in target mode scenarios... 723 */ 724 adw_lram_write_16(adw, ADW_MC_DEFAULT_SEL_MASK, 725 (0x01 << adw->initiator_id)); 726 727 /* 728 * Tell the microcode where it can find our 729 * Initiator Command Queue (ICQ). It is 730 * currently empty hence the "stopper" address. 731 */ 732 adw->commandq = adw->free_carriers; 733 adw->free_carriers = carrierbotov(adw, adw->commandq->next_ba); 734 adw->commandq->next_ba = ADW_CQ_STOPPER; 735 adw_lram_write_32(adw, ADW_MC_ICQ, adw->commandq->carr_ba); 736 737 /* 738 * Tell the microcode where it can find our 739 * Initiator Response Queue (IRQ). It too 740 * is currently empty. 741 */ 742 adw->responseq = adw->free_carriers; 743 adw->free_carriers = carrierbotov(adw, adw->responseq->next_ba); 744 adw->responseq->next_ba = ADW_CQ_STOPPER; 745 adw_lram_write_32(adw, ADW_MC_IRQ, adw->responseq->carr_ba); 746 747 adw_outb(adw, ADW_INTR_ENABLES, 748 ADW_INTR_ENABLE_HOST_INTR|ADW_INTR_ENABLE_GLOBAL_INTR); 749 750 adw_outw(adw, ADW_PC, adw_lram_read_16(adw, ADW_MC_CODE_BEGIN_ADDR)); 751 752 return (0); 753} 754 755void 756adw_set_user_sdtr(struct adw_softc *adw, u_int tid, u_int mc_sdtr) 757{ 758 adw->user_sdtr[ADW_TARGET_GROUP(tid)] &= ~ADW_TARGET_GROUP_MASK(tid); 759 adw->user_sdtr[ADW_TARGET_GROUP(tid)] |= 760 mc_sdtr << ADW_TARGET_GROUP_SHIFT(tid); 761} 762 763u_int 764adw_get_user_sdtr(struct adw_softc *adw, u_int tid) 765{ 766 u_int mc_sdtr; 767 768 mc_sdtr = adw->user_sdtr[ADW_TARGET_GROUP(tid)]; 769 mc_sdtr &= ADW_TARGET_GROUP_MASK(tid); 770 mc_sdtr >>= ADW_TARGET_GROUP_SHIFT(tid); 771 return (mc_sdtr); 772} 773 774void 775adw_set_chip_sdtr(struct adw_softc *adw, u_int tid, u_int sdtr) 776{ 777 u_int mc_sdtr_offset; 778 u_int mc_sdtr; 779 780 mc_sdtr_offset = ADW_MC_SDTR_SPEED1; 781 mc_sdtr_offset += ADW_TARGET_GROUP(tid) * 2; 782 mc_sdtr = adw_lram_read_16(adw, mc_sdtr_offset); 783 mc_sdtr &= ~ADW_TARGET_GROUP_MASK(tid); 784 mc_sdtr |= sdtr << ADW_TARGET_GROUP_SHIFT(tid); 785 adw_lram_write_16(adw, mc_sdtr_offset, mc_sdtr); 786} 787 788u_int 789adw_get_chip_sdtr(struct adw_softc *adw, u_int tid) 790{ 791 u_int mc_sdtr_offset; 792 u_int mc_sdtr; 793 794 mc_sdtr_offset = ADW_MC_SDTR_SPEED1; 795 mc_sdtr_offset += ADW_TARGET_GROUP(tid) * 2; 796 mc_sdtr = adw_lram_read_16(adw, mc_sdtr_offset); 797 mc_sdtr &= ADW_TARGET_GROUP_MASK(tid); 798 mc_sdtr >>= ADW_TARGET_GROUP_SHIFT(tid); 799 return (mc_sdtr); 800} 801 802u_int 803adw_find_sdtr(struct adw_softc *adw, u_int period) 804{ 805 int i; 806 807 i = 0; 808 if ((adw->features & ADW_DT) == 0) 809 i = ADW_MC_SDTR_OFFSET_ULTRA2; 810 if ((adw->features & ADW_ULTRA2) == 0) 811 i = ADW_MC_SDTR_OFFSET_ULTRA; 812 if (period == 0) 813 return ADW_MC_SDTR_ASYNC; 814 815 for (; i < adw_num_syncrates; i++) { 816 if (period <= adw_syncrates[i].period) 817 return (adw_syncrates[i].mc_sdtr); 818 } 819 return ADW_MC_SDTR_ASYNC; 820} 821 822u_int 823adw_find_period(struct adw_softc *adw, u_int mc_sdtr) 824{ 825 int i; 826 827 for (i = 0; i < adw_num_syncrates; i++) { 828 if (mc_sdtr == adw_syncrates[i].mc_sdtr) 829 break; 830 } 831 return (adw_syncrates[i].period); 832} 833 834u_int 835adw_hshk_cfg_period_factor(u_int tinfo) 836{ 837 tinfo &= ADW_HSHK_CFG_RATE_MASK; 838 tinfo >>= ADW_HSHK_CFG_RATE_SHIFT; 839 if (tinfo == 0x11) 840 /* 80MHz/DT */ 841 return (9); 842 else if (tinfo == 0x10) 843 /* 40MHz */ 844 return (10); 845 else 846 return (((tinfo * 25) + 50) / 4); 847} 848 849/* 850 * Send an idle command to the chip and wait for completion. 851 */ 852adw_idle_cmd_status_t 853adw_idle_cmd_send(struct adw_softc *adw, adw_idle_cmd_t cmd, u_int parameter) 854{ 855 u_int timeout; 856 adw_idle_cmd_status_t status; 857 int s; 858 859 s = splcam(); 860 861 /* 862 * Clear the idle command status which is set by the microcode 863 * to a non-zero value to indicate when the command is completed. 864 */ 865 adw_lram_write_16(adw, ADW_MC_IDLE_CMD_STATUS, 0); 866 867 /* 868 * Write the idle command value after the idle command parameter 869 * has been written to avoid a race condition. If the order is not 870 * followed, the microcode may process the idle command before the 871 * parameters have been written to LRAM. 872 */ 873 adw_lram_write_32(adw, ADW_MC_IDLE_CMD_PARAMETER, parameter); 874 adw_lram_write_16(adw, ADW_MC_IDLE_CMD, cmd); 875 876 /* 877 * Tickle the RISC to tell it to process the idle command. 878 */ 879 adw_tickle_risc(adw, ADW_TICKLE_B); 880 881 /* Wait for up to 10 seconds for the command to complete */ 882 timeout = 5000000; 883 while (--timeout) { 884 status = adw_lram_read_16(adw, ADW_MC_IDLE_CMD_STATUS); 885 if (status != 0) 886 break; 887 DELAY(20); 888 } 889 890 if (timeout == 0) 891 panic("%s: Idle Command Timed Out!\n", adw_name(adw)); 892 splx(s); 893 return (status); 894} 895