vchi_cfg.h revision 278277
1/** 2 * Copyright (c) 2010-2012 Broadcom. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 1. Redistributions of source code must retain the above copyright 8 * notice, this list of conditions, and the following disclaimer, 9 * without modification. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. The names of the above-listed copyright holders may not be used 14 * to endorse or promote products derived from this software without 15 * specific prior written permission. 16 * 17 * ALTERNATIVELY, this software may be distributed under the terms of the 18 * GNU General Public License ("GPL") version 2, as published by the Free 19 * Software Foundation. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS 22 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 23 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 24 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 25 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 26 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 27 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 28 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 29 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 30 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 31 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 32 */ 33 34#ifndef VCHI_CFG_H_ 35#define VCHI_CFG_H_ 36 37/**************************************************************************************** 38 * Defines in this first section are part of the VCHI API and may be examined by VCHI 39 * services. 40 ***************************************************************************************/ 41 42/* Required alignment of base addresses for bulk transfer, if unaligned transfers are not enabled */ 43/* Really determined by the message driver, and should be available from a run-time call. */ 44#ifndef VCHI_BULK_ALIGN 45# if __VCCOREVER__ >= 0x04000000 46# define VCHI_BULK_ALIGN 32 // Allows for the need to do cache cleans 47# else 48# define VCHI_BULK_ALIGN 16 49# endif 50#endif 51 52/* Required length multiple for bulk transfers, if unaligned transfers are not enabled */ 53/* May be less than or greater than VCHI_BULK_ALIGN */ 54/* Really determined by the message driver, and should be available from a run-time call. */ 55#ifndef VCHI_BULK_GRANULARITY 56# if __VCCOREVER__ >= 0x04000000 57# define VCHI_BULK_GRANULARITY 32 // Allows for the need to do cache cleans 58# else 59# define VCHI_BULK_GRANULARITY 16 60# endif 61#endif 62 63/* The largest possible message to be queued with vchi_msg_queue. */ 64#ifndef VCHI_MAX_MSG_SIZE 65# if defined VCHI_LOCAL_HOST_PORT 66# define VCHI_MAX_MSG_SIZE 16384 // makes file transfers fast, but should they be using bulk? 67# else 68# define VCHI_MAX_MSG_SIZE 4096 // NOTE: THIS MUST BE LARGER THAN OR EQUAL TO THE SIZE OF THE KHRONOS MERGE BUFFER!! 69# endif 70#endif 71 72/****************************************************************************************** 73 * Defines below are system configuration options, and should not be used by VCHI services. 74 *****************************************************************************************/ 75 76/* How many connections can we support? A localhost implementation uses 2 connections, 77 * 1 for host-app, 1 for VMCS, and these are hooked together by a loopback MPHI VCFW 78 * driver. */ 79#ifndef VCHI_MAX_NUM_CONNECTIONS 80# define VCHI_MAX_NUM_CONNECTIONS 3 81#endif 82 83/* How many services can we open per connection? Extending this doesn't cost processing time, just a small 84 * amount of static memory. */ 85#ifndef VCHI_MAX_SERVICES_PER_CONNECTION 86# define VCHI_MAX_SERVICES_PER_CONNECTION 36 87#endif 88 89/* Adjust if using a message driver that supports more logical TX channels */ 90#ifndef VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION 91# define VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION 9 // 1 MPHI + 8 CCP2 logical channels 92#endif 93 94/* Adjust if using a message driver that supports more logical RX channels */ 95#ifndef VCHI_MAX_BULK_RX_CHANNELS_PER_CONNECTION 96# define VCHI_MAX_BULK_RX_CHANNELS_PER_CONNECTION 1 // 1 MPHI 97#endif 98 99/* How many receive slots do we use. This times VCHI_MAX_MSG_SIZE gives the effective 100 * receive queue space, less message headers. */ 101#ifndef VCHI_NUM_READ_SLOTS 102# if defined(VCHI_LOCAL_HOST_PORT) 103# define VCHI_NUM_READ_SLOTS 4 104# else 105# define VCHI_NUM_READ_SLOTS 48 106# endif 107#endif 108 109/* Do we utilise overrun facility for receive message slots? Can aid peer transmit 110 * performance. Only define on VideoCore end, talking to host. 111 */ 112//#define VCHI_MSG_RX_OVERRUN 113 114/* How many transmit slots do we use. Generally don't need many, as the hardware driver 115 * underneath VCHI will usually have its own buffering. */ 116#ifndef VCHI_NUM_WRITE_SLOTS 117# define VCHI_NUM_WRITE_SLOTS 4 118#endif 119 120/* If a service has held or queued received messages in VCHI_XOFF_THRESHOLD or more slots, 121 * then it's taking up too much buffer space, and the peer service will be told to stop 122 * transmitting with an XOFF message. For this to be effective, the VCHI_NUM_READ_SLOTS 123 * needs to be considerably bigger than VCHI_NUM_WRITE_SLOTS, or the transmit latency 124 * is too high. */ 125#ifndef VCHI_XOFF_THRESHOLD 126# define VCHI_XOFF_THRESHOLD (VCHI_NUM_READ_SLOTS / 2) 127#endif 128 129/* After we've sent an XOFF, the peer will be told to resume transmission once the local 130 * service has dequeued/released enough messages that it's now occupying 131 * VCHI_XON_THRESHOLD slots or fewer. */ 132#ifndef VCHI_XON_THRESHOLD 133# define VCHI_XON_THRESHOLD (VCHI_NUM_READ_SLOTS / 4) 134#endif 135 136/* A size below which a bulk transfer omits the handshake completely and always goes 137 * via the message channel, if bulk auxiliary is being sent on that service. (The user 138 * can guarantee this by enabling unaligned transmits). 139 * Not API. */ 140#ifndef VCHI_MIN_BULK_SIZE 141# define VCHI_MIN_BULK_SIZE ( VCHI_MAX_MSG_SIZE / 2 < 4096 ? VCHI_MAX_MSG_SIZE / 2 : 4096 ) 142#endif 143 144/* Maximum size of bulk transmission chunks, for each interface type. A trade-off between 145 * speed and latency; the smaller the chunk size the better change of messages and other 146 * bulk transmissions getting in when big bulk transfers are happening. Set to 0 to not 147 * break transmissions into chunks. 148 */ 149#ifndef VCHI_MAX_BULK_CHUNK_SIZE_MPHI 150# define VCHI_MAX_BULK_CHUNK_SIZE_MPHI (16 * 1024) 151#endif 152 153/* NB Chunked CCP2 transmissions violate the letter of the CCP2 spec by using "JPEG8" mode 154 * with multiple-line frames. Only use if the receiver can cope. */ 155#ifndef VCHI_MAX_BULK_CHUNK_SIZE_CCP2 156# define VCHI_MAX_BULK_CHUNK_SIZE_CCP2 0 157#endif 158 159/* How many TX messages can we have pending in our transmit slots. Once exhausted, 160 * vchi_msg_queue will be blocked. */ 161#ifndef VCHI_TX_MSG_QUEUE_SIZE 162# define VCHI_TX_MSG_QUEUE_SIZE 256 163#endif 164 165/* How many RX messages can we have parsed in the receive slots. Once exhausted, parsing 166 * will be suspended until older messages are dequeued/released. */ 167#ifndef VCHI_RX_MSG_QUEUE_SIZE 168# define VCHI_RX_MSG_QUEUE_SIZE 256 169#endif 170 171/* Really should be able to cope if we run out of received message descriptors, by 172 * suspending parsing as the comment above says, but we don't. This sweeps the issue 173 * under the carpet. */ 174#if VCHI_RX_MSG_QUEUE_SIZE < (VCHI_MAX_MSG_SIZE/16 + 1) * VCHI_NUM_READ_SLOTS 175# undef VCHI_RX_MSG_QUEUE_SIZE 176# define VCHI_RX_MSG_QUEUE_SIZE (VCHI_MAX_MSG_SIZE/16 + 1) * VCHI_NUM_READ_SLOTS 177#endif 178 179/* How many bulk transmits can we have pending. Once exhausted, vchi_bulk_queue_transmit 180 * will be blocked. */ 181#ifndef VCHI_TX_BULK_QUEUE_SIZE 182# define VCHI_TX_BULK_QUEUE_SIZE 64 183#endif 184 185/* How many bulk receives can we have pending. Once exhausted, vchi_bulk_queue_receive 186 * will be blocked. */ 187#ifndef VCHI_RX_BULK_QUEUE_SIZE 188# define VCHI_RX_BULK_QUEUE_SIZE 64 189#endif 190 191/* A limit on how many outstanding bulk requests we expect the peer to give us. If 192 * the peer asks for more than this, VCHI will fail and assert. The number is determined 193 * by the peer's hardware - it's the number of outstanding requests that can be queued 194 * on all bulk channels. VC3's MPHI peripheral allows 16. */ 195#ifndef VCHI_MAX_PEER_BULK_REQUESTS 196# define VCHI_MAX_PEER_BULK_REQUESTS 32 197#endif 198 199/* Define VCHI_CCP2TX_MANUAL_POWER if the host tells us when to turn the CCP2 200 * transmitter on and off. 201 */ 202/*#define VCHI_CCP2TX_MANUAL_POWER*/ 203 204#ifndef VCHI_CCP2TX_MANUAL_POWER 205 206/* Timeout (in milliseconds) for putting the CCP2TX interface into IDLE state. Set 207 * negative for no IDLE. 208 */ 209# ifndef VCHI_CCP2TX_IDLE_TIMEOUT 210# define VCHI_CCP2TX_IDLE_TIMEOUT 5 211# endif 212 213/* Timeout (in milliseconds) for putting the CCP2TX interface into OFF state. Set 214 * negative for no OFF. 215 */ 216# ifndef VCHI_CCP2TX_OFF_TIMEOUT 217# define VCHI_CCP2TX_OFF_TIMEOUT 1000 218# endif 219 220#endif /* VCHI_CCP2TX_MANUAL_POWER */ 221 222#endif /* VCHI_CFG_H_ */ 223 224/****************************** End of file **********************************/ 225