aslmain.c revision 281396
1/******************************************************************************
2 *
3 * Module Name: aslmain - compiler main and utilities
4 *
5 *****************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2015, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 *    notice, this list of conditions, and the following disclaimer,
16 *    without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 *    substantially similar to the "NO WARRANTY" disclaimer below
19 *    ("Disclaimer") and any redistribution must be conditioned upon
20 *    including a substantially similar Disclaimer requirement for further
21 *    binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 *    of any contributors may be used to endorse or promote products derived
24 *    from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#define _DECLARE_GLOBALS
45
46#include <contrib/dev/acpica/compiler/aslcompiler.h>
47#include <contrib/dev/acpica/include/acapps.h>
48#include <contrib/dev/acpica/include/acdisasm.h>
49#include <signal.h>
50
51#define _COMPONENT          ACPI_COMPILER
52        ACPI_MODULE_NAME    ("aslmain")
53
54/*
55 * Main routine for the iASL compiler.
56 *
57 * Portability note: The compiler depends upon the host for command-line
58 * wildcard support - it is not implemented locally. For example:
59 *
60 * Linux/Unix systems: Shell expands wildcards automatically.
61 *
62 * Windows: The setargv.obj module must be linked in to automatically
63 * expand wildcards.
64 */
65
66/* Local prototypes */
67
68static void ACPI_SYSTEM_XFACE
69AslSignalHandler (
70    int                     Sig);
71
72static void
73AslInitialize (
74    void);
75
76UINT8
77AcpiIsBigEndianMachine (
78    void);
79
80
81/*******************************************************************************
82 *
83 * FUNCTION:    AcpiIsBigEndianMachine
84 *
85 * PARAMETERS:  None
86 *
87 * RETURN:      TRUE if machine is big endian
88 *              FALSE if machine is little endian
89 *
90 * DESCRIPTION: Detect whether machine is little endian or big endian.
91 *
92 ******************************************************************************/
93
94UINT8
95AcpiIsBigEndianMachine (
96    void)
97{
98    union {
99        UINT32              Integer;
100        UINT8               Bytes[4];
101    } Overlay = {0xFF000000};
102
103    return (Overlay.Bytes[0]); /* Returns 0xFF (TRUE) for big endian */
104}
105
106
107/*******************************************************************************
108 *
109 * FUNCTION:    Usage
110 *
111 * PARAMETERS:  None
112 *
113 * RETURN:      None
114 *
115 * DESCRIPTION: Display option help message.
116 *              Optional items in square brackets.
117 *
118 ******************************************************************************/
119
120void
121Usage (
122    void)
123{
124    printf ("%s\n\n", ASL_COMPLIANCE);
125    ACPI_USAGE_HEADER ("iasl [Options] [Files]");
126
127    printf ("\nGeneral:\n");
128    ACPI_OPTION ("-@ <file>",       "Specify command file");
129    ACPI_OPTION ("-I <dir>",        "Specify additional include directory");
130    ACPI_OPTION ("-T <sig>|ALL|*",  "Create table template file for ACPI <Sig>");
131    ACPI_OPTION ("-p <prefix>",     "Specify path/filename prefix for all output files");
132    ACPI_OPTION ("-v",              "Display compiler version");
133    ACPI_OPTION ("-vo",             "Enable optimization comments");
134    ACPI_OPTION ("-vs",             "Disable signon");
135
136    printf ("\nHelp:\n");
137    ACPI_OPTION ("-h",              "This message");
138    ACPI_OPTION ("-hc",             "Display operators allowed in constant expressions");
139    ACPI_OPTION ("-hf",             "Display help for output filename generation");
140    ACPI_OPTION ("-hr",             "Display ACPI reserved method names");
141    ACPI_OPTION ("-ht",             "Display currently supported ACPI table names");
142
143    printf ("\nPreprocessor:\n");
144    ACPI_OPTION ("-D <symbol>",     "Define symbol for preprocessor use");
145    ACPI_OPTION ("-li",             "Create preprocessed output file (*.i)");
146    ACPI_OPTION ("-P",              "Preprocess only and create preprocessor output file (*.i)");
147    ACPI_OPTION ("-Pn",             "Disable preprocessor");
148
149    printf ("\nErrors, Warnings, and Remarks:\n");
150    ACPI_OPTION ("-va",             "Disable all errors/warnings/remarks");
151    ACPI_OPTION ("-ve",             "Report only errors (ignore warnings and remarks)");
152    ACPI_OPTION ("-vi",             "Less verbose errors and warnings for use with IDEs");
153    ACPI_OPTION ("-vr",             "Disable remarks");
154    ACPI_OPTION ("-vw <messageid>", "Disable specific warning or remark");
155    ACPI_OPTION ("-w1 -w2 -w3",     "Set warning reporting level");
156    ACPI_OPTION ("-we",             "Report warnings as errors");
157
158    printf ("\nAML Code Generation (*.aml):\n");
159    ACPI_OPTION ("-oa",             "Disable all optimizations (compatibility mode)");
160    ACPI_OPTION ("-of",             "Disable constant folding");
161    ACPI_OPTION ("-oi",             "Disable integer optimization to Zero/One/Ones");
162    ACPI_OPTION ("-on",             "Disable named reference string optimization");
163    ACPI_OPTION ("-cr",             "Disable Resource Descriptor error checking");
164    ACPI_OPTION ("-in",             "Ignore NoOp operators");
165    ACPI_OPTION ("-r <revision>",   "Override table header Revision (1-255)");
166
167    printf ("\nOptional Source Code Output Files:\n");
168    ACPI_OPTION ("-sc -sa",         "Create source file in C or assembler (*.c or *.asm)");
169    ACPI_OPTION ("-ic -ia",         "Create include file in C or assembler (*.h or *.inc)");
170    ACPI_OPTION ("-tc -ta -ts",     "Create hex AML table in C, assembler, or ASL (*.hex)");
171    ACPI_OPTION ("-so",             "Create offset table in C (*.offset.h)");
172
173    printf ("\nOptional Listing Files:\n");
174    ACPI_OPTION ("-l",              "Create mixed listing file (ASL source and AML) (*.lst)");
175    ACPI_OPTION ("-lm",             "Create hardware summary map file (*.map)");
176    ACPI_OPTION ("-ln",             "Create namespace file (*.nsp)");
177    ACPI_OPTION ("-ls",             "Create combined source file (expanded includes) (*.src)");
178
179    printf ("\nData Table Compiler:\n");
180    ACPI_OPTION ("-G",              "Compile custom table that contains generic operators");
181    ACPI_OPTION ("-vt",             "Create verbose template files (full disassembly)");
182
183    printf ("\nAML Disassembler:\n");
184    ACPI_OPTION ("-d  <f1 f2 ...>", "Disassemble or decode binary ACPI tables to file (*.dsl)");
185    ACPI_OPTION ("",                "  (Optional, file type is automatically detected)");
186    ACPI_OPTION ("-da <f1 f2 ...>", "Disassemble multiple tables from single namespace");
187    ACPI_OPTION ("-db",             "Do not translate Buffers to Resource Templates");
188    ACPI_OPTION ("-dc <f1 f2 ...>", "Disassemble AML and immediately compile it");
189    ACPI_OPTION ("",                "  (Obtain DSDT from current system if no input file)");
190    ACPI_OPTION ("-df",             "Force disassembler to assume table contains valid AML");
191    ACPI_OPTION ("-dl",             "Emit legacy ASL code only (no C-style operators)");
192    ACPI_OPTION ("-e  <f1 f2 ...>", "Include ACPI table(s) for external symbol resolution");
193    ACPI_OPTION ("-fe <file>",      "Specify external symbol declaration file");
194    ACPI_OPTION ("-in",             "Ignore NoOp opcodes");
195    ACPI_OPTION ("-vt",             "Dump binary table data in hex format within output file");
196
197    printf ("\nDebug Options:\n");
198    ACPI_OPTION ("-bf",             "Create debug file (full output) (*.txt)");
199    ACPI_OPTION ("-bs",             "Create debug file (parse tree only) (*.txt)");
200    ACPI_OPTION ("-bp <depth>",     "Prune ASL parse tree");
201    ACPI_OPTION ("-bt <type>",      "Object type to be pruned from the parse tree");
202    ACPI_OPTION ("-f",              "Ignore errors, force creation of AML output file(s)");
203    ACPI_OPTION ("-m <size>",       "Set internal line buffer size (in Kbytes)");
204    ACPI_OPTION ("-n",              "Parse only, no output generation");
205    ACPI_OPTION ("-ot",             "Display compile times and statistics");
206    ACPI_OPTION ("-x <level>",      "Set debug level for trace output");
207    ACPI_OPTION ("-z",              "Do not insert new compiler ID for DataTables");
208}
209
210
211/*******************************************************************************
212 *
213 * FUNCTION:    FilenameHelp
214 *
215 * PARAMETERS:  None
216 *
217 * RETURN:      None
218 *
219 * DESCRIPTION: Display help message for output filename generation
220 *
221 ******************************************************************************/
222
223void
224AslFilenameHelp (
225    void)
226{
227
228    printf ("\nAML output filename generation:\n");
229    printf ("  Output filenames are generated by appending an extension to a common\n");
230    printf ("  filename prefix. The filename prefix is obtained via one of the\n");
231    printf ("  following methods (in priority order):\n");
232    printf ("    1) The -p option specifies the prefix\n");
233    printf ("    2) The prefix of the AMLFileName in the ASL Definition Block\n");
234    printf ("    3) The prefix of the input filename\n");
235    printf ("\n");
236}
237
238
239/******************************************************************************
240 *
241 * FUNCTION:    AslSignalHandler
242 *
243 * PARAMETERS:  Sig                 - Signal that invoked this handler
244 *
245 * RETURN:      None
246 *
247 * DESCRIPTION: Control-C handler. Delete any intermediate files and any
248 *              output files that may be left in an indeterminate state.
249 *
250 *****************************************************************************/
251
252static void ACPI_SYSTEM_XFACE
253AslSignalHandler (
254    int                     Sig)
255{
256    UINT32                  i;
257
258
259    signal (Sig, SIG_IGN);
260    printf ("Aborting\n\n");
261
262    /* Close all open files */
263
264    Gbl_Files[ASL_FILE_PREPROCESSOR].Handle = NULL; /* the .i file is same as source file */
265
266    for (i = ASL_FILE_INPUT; i < ASL_MAX_FILE_TYPE; i++)
267    {
268        FlCloseFile (i);
269    }
270
271    /* Delete any output files */
272
273    for (i = ASL_FILE_AML_OUTPUT; i < ASL_MAX_FILE_TYPE; i++)
274    {
275        FlDeleteFile (i);
276    }
277
278    exit (0);
279}
280
281
282/*******************************************************************************
283 *
284 * FUNCTION:    AslInitialize
285 *
286 * PARAMETERS:  None
287 *
288 * RETURN:      None
289 *
290 * DESCRIPTION: Initialize compiler globals
291 *
292 ******************************************************************************/
293
294static void
295AslInitialize (
296    void)
297{
298    UINT32                  i;
299
300
301    for (i = 0; i < ASL_NUM_FILES; i++)
302    {
303        Gbl_Files[i].Handle = NULL;
304        Gbl_Files[i].Filename = NULL;
305    }
306
307    Gbl_Files[ASL_FILE_STDOUT].Handle   = stdout;
308    Gbl_Files[ASL_FILE_STDOUT].Filename = "STDOUT";
309
310    Gbl_Files[ASL_FILE_STDERR].Handle   = stderr;
311    Gbl_Files[ASL_FILE_STDERR].Filename = "STDERR";
312}
313
314
315/*******************************************************************************
316 *
317 * FUNCTION:    main
318 *
319 * PARAMETERS:  Standard argc/argv
320 *
321 * RETURN:      Program termination code
322 *
323 * DESCRIPTION: C main routine for the Asl Compiler. Handle command line
324 *              options and begin the compile for each file on the command line
325 *
326 ******************************************************************************/
327
328int ACPI_SYSTEM_XFACE
329main (
330    int                     argc,
331    char                    **argv)
332{
333    ACPI_STATUS             Status;
334    int                     Index1;
335    int                     Index2;
336    int                     ReturnStatus = 0;
337
338
339    /*
340     * Big-endian machines are not currently supported. ACPI tables must
341     * be little-endian, and support for big-endian machines needs to
342     * be implemented.
343     */
344    if (AcpiIsBigEndianMachine ())
345    {
346        fprintf (stderr,
347            "iASL is not currently supported on big-endian machines.\n");
348        return (-1);
349    }
350
351    AcpiOsInitialize ();
352    ACPI_DEBUG_INITIALIZE (); /* For debug version only */
353
354    /* Initialize preprocessor and compiler before command line processing */
355
356    signal (SIGINT, AslSignalHandler);
357    AcpiGbl_ExternalFileList = NULL;
358    AcpiDbgLevel = 0;
359    PrInitializePreprocessor ();
360    AslInitialize ();
361
362    Index1 = Index2 = AslCommandLine (argc, argv);
363
364    /* Allocate the line buffer(s), must be after command line */
365
366    Gbl_LineBufferSize /= 2;
367    UtExpandLineBuffers ();
368
369    /* Perform global actions first/only */
370
371    if (Gbl_DisassembleAll)
372    {
373        while (argv[Index1])
374        {
375            Status = AcpiDmAddToExternalFileList (argv[Index1]);
376            if (ACPI_FAILURE (Status))
377            {
378                return (-1);
379            }
380
381            Index1++;
382        }
383    }
384
385    /* Process each pathname/filename in the list, with possible wildcards */
386
387    while (argv[Index2])
388    {
389        /*
390         * If -p not specified, we will use the input filename as the
391         * output filename prefix
392         */
393        if (Gbl_UseDefaultAmlFilename)
394        {
395            Gbl_OutputFilenamePrefix = argv[Index2];
396            UtConvertBackslashes (Gbl_OutputFilenamePrefix);
397        }
398
399        Status = AslDoOneFile (argv[Index2]);
400        if (ACPI_FAILURE (Status))
401        {
402            ReturnStatus = -1;
403            goto CleanupAndExit;
404        }
405
406        Index2++;
407    }
408
409
410CleanupAndExit:
411
412    UtFreeLineBuffers ();
413    AslParserCleanup ();
414
415    if (AcpiGbl_ExternalFileList)
416    {
417        AcpiDmClearExternalFileList();
418    }
419
420    return (ReturnStatus);
421}
422