if_npe.c revision 169954
1/*-
2 * Copyright (c) 2006 Sam Leffler.  All rights reserved.
3 *
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions
6 * are met:
7 * 1. Redistributions of source code must retain the above copyright
8 *    notice, this list of conditions and the following disclaimer.
9 * 2. Redistributions in binary form must reproduce the above copyright
10 *    notice, this list of conditions and the following disclaimer in the
11 *    documentation and/or other materials provided with the distribution.
12 *
13 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
14 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
15 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
16 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
17 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
18 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
19 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
20 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
21 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
22 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
23 */
24
25#include <sys/cdefs.h>
26__FBSDID("$FreeBSD: head/sys/arm/xscale/ixp425/if_npe.c 169954 2007-05-24 16:31:22Z sam $");
27
28/*
29 * Intel XScale NPE Ethernet driver.
30 *
31 * This driver handles the two ports present on the IXP425.
32 * Packet processing is done by the Network Processing Engines
33 * (NPE's) that work together with a MAC and PHY. The MAC
34 * is also mapped to the XScale cpu; the PHY is accessed via
35 * the MAC. NPE-XScale communication happens through h/w
36 * queues managed by the Q Manager block.
37 *
38 * The code here replaces the ethAcc, ethMii, and ethDB classes
39 * in the Intel Access Library (IAL) and the OS-specific driver.
40 *
41 * XXX add vlan support
42 * XXX NPE-C port doesn't work yet
43 */
44#ifdef HAVE_KERNEL_OPTION_HEADERS
45#include "opt_device_polling.h"
46#endif
47
48#include <sys/param.h>
49#include <sys/systm.h>
50#include <sys/bus.h>
51#include <sys/kernel.h>
52#include <sys/mbuf.h>
53#include <sys/malloc.h>
54#include <sys/module.h>
55#include <sys/rman.h>
56#include <sys/socket.h>
57#include <sys/sockio.h>
58#include <sys/sysctl.h>
59#include <sys/endian.h>
60#include <machine/bus.h>
61
62#include <net/ethernet.h>
63#include <net/if.h>
64#include <net/if_arp.h>
65#include <net/if_dl.h>
66#include <net/if_media.h>
67#include <net/if_mib.h>
68#include <net/if_types.h>
69
70#ifdef INET
71#include <netinet/in.h>
72#include <netinet/in_systm.h>
73#include <netinet/in_var.h>
74#include <netinet/ip.h>
75#endif
76
77#include <net/bpf.h>
78#include <net/bpfdesc.h>
79
80#include <arm/xscale/ixp425/ixp425reg.h>
81#include <arm/xscale/ixp425/ixp425var.h>
82#include <arm/xscale/ixp425/ixp425_qmgr.h>
83#include <arm/xscale/ixp425/ixp425_npevar.h>
84
85#include <dev/mii/mii.h>
86#include <dev/mii/miivar.h>
87#include <arm/xscale/ixp425/if_npereg.h>
88
89#include "miibus_if.h"
90
91/*
92 * XXX: For the main bus dma tag. Can go away if the new method to get the
93 * dma tag from the parent got MFC'd into RELENG_6.
94 */
95extern struct ixp425_softc *ixp425_softc;
96
97struct npebuf {
98	struct npebuf	*ix_next;	/* chain to next buffer */
99	void		*ix_m;		/* backpointer to mbuf */
100	bus_dmamap_t	ix_map;		/* bus dma map for associated data */
101	struct npehwbuf	*ix_hw;		/* associated h/w block */
102	uint32_t	ix_neaddr;	/* phys address of ix_hw */
103};
104
105struct npedma {
106	const char*	name;
107	int		nbuf;		/* # npebuf's allocated */
108	bus_dma_tag_t	mtag;		/* bus dma tag for mbuf data */
109	struct npehwbuf	*hwbuf;		/* NPE h/w buffers */
110	bus_dma_tag_t	buf_tag;	/* tag+map for NPE buffers */
111	bus_dmamap_t	buf_map;
112	bus_addr_t	buf_phys;	/* phys addr of buffers */
113	struct npebuf	*buf;		/* s/w buffers (1-1 w/ h/w) */
114};
115
116struct npe_softc {
117	/* XXX mii requires this be first; do not move! */
118	struct ifnet	*sc_ifp;	/* ifnet pointer */
119	struct mtx	sc_mtx;		/* basically a perimeter lock */
120	device_t	sc_dev;
121	bus_space_tag_t	sc_iot;
122	bus_space_handle_t sc_ioh;	/* MAC register window */
123	device_t	sc_mii;		/* child miibus */
124	bus_space_handle_t sc_miih;	/* MII register window */
125	struct ixpnpe_softc *sc_npe;	/* NPE support */
126	int		sc_debug;	/* DPRINTF* control */
127	int		sc_tickinterval;
128	struct callout	tick_ch;	/* Tick callout */
129	int		npe_watchdog_timer;
130	struct npedma	txdma;
131	struct npebuf	*tx_free;	/* list of free tx buffers */
132	struct npedma	rxdma;
133	bus_addr_t	buf_phys;	/* XXX for returning a value */
134	int		rx_qid;		/* rx qid */
135	int		rx_freeqid;	/* rx free buffers qid */
136	int		tx_qid;		/* tx qid */
137	int		tx_doneqid;	/* tx completed qid */
138	struct ifmib_iso_8802_3 mibdata;
139	bus_dma_tag_t	sc_stats_tag;	/* bus dma tag for stats block */
140	struct npestats	*sc_stats;
141	bus_dmamap_t	sc_stats_map;
142	bus_addr_t	sc_stats_phys;	/* phys addr of sc_stats */
143};
144
145/*
146 * Per-unit static configuration for IXP425.  The tx and
147 * rx free Q id's are fixed by the NPE microcode.  The
148 * rx Q id's are programmed to be separate to simplify
149 * multi-port processing.  It may be better to handle
150 * all traffic through one Q (as done by the Intel drivers).
151 *
152 * Note that the PHY's are accessible only from MAC A
153 * on the IXP425.  This and other platform-specific
154 * assumptions probably need to be handled through hints.
155 */
156static const struct {
157	const char	*desc;		/* device description */
158	int		npeid;		/* NPE assignment */
159	uint32_t	imageid;	/* NPE firmware image id */
160	uint32_t	regbase;
161	int		regsize;
162	uint32_t	miibase;
163	int		miisize;
164	uint8_t		rx_qid;
165	uint8_t		rx_freeqid;
166	uint8_t		tx_qid;
167	uint8_t		tx_doneqid;
168} npeconfig[NPE_PORTS_MAX] = {
169	{ .desc		= "IXP NPE-B",
170	  .npeid	= NPE_B,
171	  .imageid	= IXP425_NPE_B_IMAGEID,
172	  .regbase	= IXP425_MAC_A_HWBASE,
173	  .regsize	= IXP425_MAC_A_SIZE,
174	  .miibase	= IXP425_MAC_A_HWBASE,
175	  .miisize	= IXP425_MAC_A_SIZE,
176	  .rx_qid	= 4,
177	  .rx_freeqid	= 27,
178	  .tx_qid	= 24,
179	  .tx_doneqid	= 31
180	},
181	{ .desc		= "IXP NPE-C",
182	  .npeid	= NPE_C,
183	  .imageid	= IXP425_NPE_C_IMAGEID,
184	  .regbase	= IXP425_MAC_B_HWBASE,
185	  .regsize	= IXP425_MAC_B_SIZE,
186	  .miibase	= IXP425_MAC_A_HWBASE,
187	  .miisize	= IXP425_MAC_A_SIZE,
188	  .rx_qid	= 12,
189	  .rx_freeqid	= 28,
190	  .tx_qid	= 25,
191	  .tx_doneqid	= 31
192	},
193};
194static struct npe_softc *npes[NPE_MAX];	/* NB: indexed by npeid */
195
196static __inline uint32_t
197RD4(struct npe_softc *sc, bus_size_t off)
198{
199	return bus_space_read_4(sc->sc_iot, sc->sc_ioh, off);
200}
201
202static __inline void
203WR4(struct npe_softc *sc, bus_size_t off, uint32_t val)
204{
205	bus_space_write_4(sc->sc_iot, sc->sc_ioh, off, val);
206}
207
208#define NPE_LOCK(_sc)		mtx_lock(&(_sc)->sc_mtx)
209#define	NPE_UNLOCK(_sc)		mtx_unlock(&(_sc)->sc_mtx)
210#define NPE_LOCK_INIT(_sc) \
211	mtx_init(&_sc->sc_mtx, device_get_nameunit(_sc->sc_dev), \
212	    MTX_NETWORK_LOCK, MTX_DEF)
213#define NPE_LOCK_DESTROY(_sc)	mtx_destroy(&_sc->sc_mtx);
214#define NPE_ASSERT_LOCKED(_sc)	mtx_assert(&_sc->sc_mtx, MA_OWNED);
215#define NPE_ASSERT_UNLOCKED(_sc) mtx_assert(&_sc->sc_mtx, MA_NOTOWNED);
216
217static devclass_t npe_devclass;
218
219static int	npe_activate(device_t dev);
220static void	npe_deactivate(device_t dev);
221static int	npe_ifmedia_update(struct ifnet *ifp);
222static void	npe_ifmedia_status(struct ifnet *ifp, struct ifmediareq *ifmr);
223static void	npe_setmac(struct npe_softc *sc, u_char *eaddr);
224static void	npe_getmac(struct npe_softc *sc, u_char *eaddr);
225static void	npe_txdone(int qid, void *arg);
226static int	npe_rxbuf_init(struct npe_softc *, struct npebuf *,
227			struct mbuf *);
228static void	npe_rxdone(int qid, void *arg);
229static void	npeinit(void *);
230static void	npestart_locked(struct ifnet *);
231static void	npestart(struct ifnet *);
232static void	npestop(struct npe_softc *);
233static void	npewatchdog(struct npe_softc *);
234static int	npeioctl(struct ifnet * ifp, u_long, caddr_t);
235
236static int	npe_setrxqosentry(struct npe_softc *, int classix,
237			int trafclass, int qid);
238static int	npe_updatestats(struct npe_softc *);
239#if 0
240static int	npe_getstats(struct npe_softc *);
241static uint32_t	npe_getimageid(struct npe_softc *);
242static int	npe_setloopback(struct npe_softc *, int ena);
243#endif
244
245/* NB: all tx done processing goes through one queue */
246static int tx_doneqid = -1;
247
248SYSCTL_NODE(_hw, OID_AUTO, npe, CTLFLAG_RD, 0, "IXP425 NPE driver parameters");
249
250static int npe_debug = 0;
251SYSCTL_INT(_hw_npe, OID_AUTO, debug, CTLFLAG_RW, &npe_debug,
252	   0, "IXP425 NPE network interface debug msgs");
253TUNABLE_INT("hw.npe.npe", &npe_debug);
254#define	DPRINTF(sc, fmt, ...) do {					\
255	if (sc->sc_debug) device_printf(sc->sc_dev, fmt, __VA_ARGS__);	\
256} while (0)
257#define	DPRINTFn(n, sc, fmt, ...) do {					\
258	if (sc->sc_debug >= n) device_printf(sc->sc_dev, fmt, __VA_ARGS__);\
259} while (0)
260static int npe_tickinterval = 3;		/* npe_tick frequency (secs) */
261SYSCTL_INT(_hw_npe, OID_AUTO, tickinterval, CTLFLAG_RD, &npe_tickinterval,
262	    0, "periodic work interval (secs)");
263TUNABLE_INT("hw.npe.tickinterval", &npe_tickinterval);
264
265static	int npe_rxbuf = 64;		/* # rx buffers to allocate */
266SYSCTL_INT(_hw_npe, OID_AUTO, rxbuf, CTLFLAG_RD, &npe_rxbuf,
267	    0, "rx buffers allocated");
268TUNABLE_INT("hw.npe.rxbuf", &npe_rxbuf);
269static	int npe_txbuf = 128;		/* # tx buffers to allocate */
270SYSCTL_INT(_hw_npe, OID_AUTO, txbuf, CTLFLAG_RD, &npe_txbuf,
271	    0, "tx buffers allocated");
272TUNABLE_INT("hw.npe.txbuf", &npe_txbuf);
273
274static int
275npe_probe(device_t dev)
276{
277	int unit = device_get_unit(dev);
278
279	if (unit >= NPE_PORTS_MAX) {
280		device_printf(dev, "unit %d not supported\n", unit);
281		return EINVAL;
282	}
283	/* XXX check feature register to see if enabled */
284	device_set_desc(dev, npeconfig[unit].desc);
285	return 0;
286}
287
288static int
289npe_attach(device_t dev)
290{
291	struct npe_softc *sc = device_get_softc(dev);
292	struct ixp425_softc *sa = device_get_softc(device_get_parent(dev));
293	struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(dev);
294	struct sysctl_oid *tree = device_get_sysctl_tree(dev);
295	struct ifnet *ifp = NULL;
296	int error;
297	u_char eaddr[6];
298
299	sc->sc_dev = dev;
300	sc->sc_iot = sa->sc_iot;
301	NPE_LOCK_INIT(sc);
302	callout_init_mtx(&sc->tick_ch, &sc->sc_mtx, 0);
303	sc->sc_debug = npe_debug;
304	sc->sc_tickinterval = npe_tickinterval;
305
306	sc->sc_npe = ixpnpe_attach(dev);
307	if (sc->sc_npe == NULL) {
308		error = EIO;		/* XXX */
309		goto out;
310	}
311
312	error = npe_activate(dev);
313	if (error)
314		goto out;
315
316	npe_getmac(sc, eaddr);
317
318	/* NB: must be setup prior to invoking mii code */
319	sc->sc_ifp = ifp = if_alloc(IFT_ETHER);
320	if (mii_phy_probe(dev, &sc->sc_mii, npe_ifmedia_update, npe_ifmedia_status)) {
321		device_printf(dev, "Cannot find my PHY.\n");
322		error = ENXIO;
323		goto out;
324	}
325
326	ifp->if_softc = sc;
327	if_initname(ifp, device_get_name(dev), device_get_unit(dev));
328	ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
329	ifp->if_start = npestart;
330	ifp->if_ioctl = npeioctl;
331	ifp->if_init = npeinit;
332	IFQ_SET_MAXLEN(&ifp->if_snd, sc->txdma.nbuf - 1);
333	ifp->if_snd.ifq_drv_maxlen = IFQ_MAXLEN;
334	IFQ_SET_READY(&ifp->if_snd);
335	ifp->if_linkmib = &sc->mibdata;
336	ifp->if_linkmiblen = sizeof(sc->mibdata);
337	sc->mibdata.dot3Compliance = DOT3COMPLIANCE_STATS;
338#ifdef DEVICE_POLLING
339	ifp->if_capabilities |= IFCAP_POLLING;
340#endif
341
342	SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "debug",
343	    CTLFLAG_RW, &sc->sc_debug, 0, "control debugging printfs");
344	SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "tickinterval",
345	    CTLFLAG_RW, &sc->sc_tickinterval, 0, "periodic work frequency");
346
347	ether_ifattach(ifp, eaddr);
348	return 0;
349out:
350	npe_deactivate(dev);
351	if (ifp != NULL)
352		if_free(ifp);
353	return error;
354}
355
356static int
357npe_detach(device_t dev)
358{
359	struct npe_softc *sc = device_get_softc(dev);
360	struct ifnet *ifp = sc->sc_ifp;
361
362#ifdef DEVICE_POLLING
363	if (ifp->if_capenable & IFCAP_POLLING)
364		ether_poll_deregister(ifp);
365#endif
366	npestop(sc);
367	if (ifp != NULL) {
368		ether_ifdetach(ifp);
369		if_free(ifp);
370	}
371	NPE_LOCK_DESTROY(sc);
372	npe_deactivate(dev);
373	if (sc->sc_npe != NULL)
374		ixpnpe_detach(sc->sc_npe);
375	return 0;
376}
377
378/*
379 * Compute and install the multicast filter.
380 */
381static void
382npe_setmcast(struct npe_softc *sc)
383{
384	struct ifnet *ifp = sc->sc_ifp;
385	uint8_t mask[ETHER_ADDR_LEN], addr[ETHER_ADDR_LEN];
386	int i;
387
388	if (ifp->if_flags & IFF_PROMISC) {
389		memset(mask, 0, ETHER_ADDR_LEN);
390		memset(addr, 0, ETHER_ADDR_LEN);
391	} else if (ifp->if_flags & IFF_ALLMULTI) {
392		static const uint8_t allmulti[ETHER_ADDR_LEN] =
393		    { 0x01, 0x00, 0x00, 0x00, 0x00, 0x00 };
394		memcpy(mask, allmulti, ETHER_ADDR_LEN);
395		memcpy(addr, allmulti, ETHER_ADDR_LEN);
396	} else {
397		uint8_t clr[ETHER_ADDR_LEN], set[ETHER_ADDR_LEN];
398		struct ifmultiaddr *ifma;
399		const uint8_t *mac;
400
401		memset(clr, 0, ETHER_ADDR_LEN);
402		memset(set, 0xff, ETHER_ADDR_LEN);
403
404		IF_ADDR_LOCK(ifp);
405		TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
406			if (ifma->ifma_addr->sa_family != AF_LINK)
407				continue;
408			mac = LLADDR((struct sockaddr_dl *) ifma->ifma_addr);
409			for (i = 0; i < ETHER_ADDR_LEN; i++) {
410				clr[i] |= mac[i];
411				set[i] &= mac[i];
412			}
413		}
414		IF_ADDR_UNLOCK(ifp);
415
416		for (i = 0; i < ETHER_ADDR_LEN; i++) {
417			mask[i] = set[i] | ~clr[i];
418			addr[i] = set[i];
419		}
420	}
421
422	/*
423	 * Write the mask and address registers.
424	 */
425	for (i = 0; i < ETHER_ADDR_LEN; i++) {
426		WR4(sc, NPE_MAC_ADDR_MASK(i), mask[i]);
427		WR4(sc, NPE_MAC_ADDR(i), addr[i]);
428	}
429}
430
431static void
432npe_getaddr(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
433{
434	struct npe_softc *sc;
435
436	if (error != 0)
437		return;
438	sc = (struct npe_softc *)arg;
439	sc->buf_phys = segs[0].ds_addr;
440}
441
442static int
443npe_dma_setup(struct npe_softc *sc, struct npedma *dma,
444	const char *name, int nbuf, int maxseg)
445{
446	int error, i;
447
448	memset(dma, 0, sizeof(dma));
449
450	dma->name = name;
451	dma->nbuf = nbuf;
452
453	/* DMA tag for mapped mbufs  */
454	error = bus_dma_tag_create(ixp425_softc->sc_dmat, 1, 0,
455	    BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
456	    MCLBYTES, maxseg, MCLBYTES, 0,
457	    busdma_lock_mutex, &sc->sc_mtx, &dma->mtag);
458	if (error != 0) {
459		device_printf(sc->sc_dev, "unable to create %s mbuf dma tag, "
460		     "error %u\n", dma->name, error);
461		return error;
462	}
463
464	/* DMA tag and map for the NPE buffers */
465	error = bus_dma_tag_create(ixp425_softc->sc_dmat, sizeof(uint32_t), 0,
466	    BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
467	    nbuf * sizeof(struct npehwbuf), 1,
468	    nbuf * sizeof(struct npehwbuf), 0,
469	    busdma_lock_mutex, &sc->sc_mtx, &dma->buf_tag);
470	if (error != 0) {
471		device_printf(sc->sc_dev,
472		    "unable to create %s npebuf dma tag, error %u\n",
473		    dma->name, error);
474		return error;
475	}
476	/* XXX COHERENT for now */
477	if (bus_dmamem_alloc(dma->buf_tag, (void **)&dma->hwbuf,
478	    BUS_DMA_NOWAIT | BUS_DMA_ZERO | BUS_DMA_COHERENT,
479	    &dma->buf_map) != 0) {
480		device_printf(sc->sc_dev,
481		     "unable to allocate memory for %s h/w buffers, error %u\n",
482		     dma->name, error);
483		return error;
484	}
485	/* XXX M_TEMP */
486	dma->buf = malloc(nbuf * sizeof(struct npebuf), M_TEMP, M_NOWAIT | M_ZERO);
487	if (dma->buf == NULL) {
488		device_printf(sc->sc_dev,
489		     "unable to allocate memory for %s s/w buffers\n",
490		     dma->name);
491		return error;
492	}
493	if (bus_dmamap_load(dma->buf_tag, dma->buf_map,
494	    dma->hwbuf, nbuf*sizeof(struct npehwbuf), npe_getaddr, sc, 0) != 0) {
495		device_printf(sc->sc_dev,
496		     "unable to map memory for %s h/w buffers, error %u\n",
497		     dma->name, error);
498		return error;
499	}
500	dma->buf_phys = sc->buf_phys;
501	for (i = 0; i < dma->nbuf; i++) {
502		struct npebuf *npe = &dma->buf[i];
503		struct npehwbuf *hw = &dma->hwbuf[i];
504
505		/* calculate offset to shared area */
506		npe->ix_neaddr = dma->buf_phys +
507			((uintptr_t)hw - (uintptr_t)dma->hwbuf);
508		KASSERT((npe->ix_neaddr & 0x1f) == 0,
509		    ("ixpbuf misaligned, PA 0x%x", npe->ix_neaddr));
510		error = bus_dmamap_create(dma->mtag, BUS_DMA_NOWAIT,
511				&npe->ix_map);
512		if (error != 0) {
513			device_printf(sc->sc_dev,
514			     "unable to create dmamap for %s buffer %u, "
515			     "error %u\n", dma->name, i, error);
516			return error;
517		}
518		npe->ix_hw = hw;
519	}
520	bus_dmamap_sync(dma->buf_tag, dma->buf_map, BUS_DMASYNC_PREWRITE);
521	return 0;
522}
523
524static void
525npe_dma_destroy(struct npe_softc *sc, struct npedma *dma)
526{
527	int i;
528
529	if (dma->hwbuf != NULL) {
530		for (i = 0; i < dma->nbuf; i++) {
531			struct npebuf *npe = &dma->buf[i];
532			bus_dmamap_destroy(dma->mtag, npe->ix_map);
533		}
534		bus_dmamap_unload(dma->buf_tag, dma->buf_map);
535		bus_dmamem_free(dma->buf_tag, dma->hwbuf, dma->buf_map);
536		bus_dmamap_destroy(dma->buf_tag, dma->buf_map);
537	}
538	if (dma->buf != NULL)
539		free(dma->buf, M_TEMP);
540	if (dma->buf_tag)
541		bus_dma_tag_destroy(dma->buf_tag);
542	if (dma->mtag)
543		bus_dma_tag_destroy(dma->mtag);
544	memset(dma, 0, sizeof(*dma));
545}
546
547static int
548npe_activate(device_t dev)
549{
550	struct npe_softc * sc = device_get_softc(dev);
551	int unit = device_get_unit(dev);
552	int error, i;
553	uint32_t imageid;
554
555	/*
556	 * Load NPE firmware and start it running.  We assume
557	 * that minor version bumps remain compatible so probe
558	 * the firmware image starting with the expected version
559	 * and then bump the minor version up to the max.
560	 */
561	imageid = npeconfig[unit].imageid;
562	for (;;) {
563		error = ixpnpe_init(sc->sc_npe, "npe_fw", imageid);
564		if (error == 0)
565			break;
566		/* ESRCH is returned when the requested image is not present */
567		if (error != ESRCH)
568			return error;
569		/* bump the minor version up to the max possible */
570		if (NPEIMAGE_MINOR(imageid) == 0xff)
571			return error;
572		imageid++;
573	}
574
575	if (bus_space_map(sc->sc_iot, npeconfig[unit].regbase,
576	    npeconfig[unit].regsize, 0, &sc->sc_ioh)) {
577		device_printf(dev, "Cannot map registers 0x%x:0x%x\n",
578		    npeconfig[unit].regbase, npeconfig[unit].regsize);
579		return ENOMEM;
580	}
581
582	if (npeconfig[unit].miibase != npeconfig[unit].regbase) {
583		/*
584		 * The PHY's are only accessible from one MAC (it appears)
585		 * so for other MAC's setup an additional mapping for
586		 * frobbing the PHY registers.
587		 */
588		if (bus_space_map(sc->sc_iot, npeconfig[unit].miibase,
589		    npeconfig[unit].miisize, 0, &sc->sc_miih)) {
590			device_printf(dev,
591			    "Cannot map MII registers 0x%x:0x%x\n",
592			    npeconfig[unit].miibase, npeconfig[unit].miisize);
593			return ENOMEM;
594		}
595	} else
596		sc->sc_miih = sc->sc_ioh;
597	error = npe_dma_setup(sc, &sc->txdma, "tx", npe_txbuf, NPE_MAXSEG);
598	if (error != 0)
599		return error;
600	error = npe_dma_setup(sc, &sc->rxdma, "rx", npe_rxbuf, 1);
601	if (error != 0)
602		return error;
603
604	/* setup statistics block */
605	error = bus_dma_tag_create(ixp425_softc->sc_dmat, sizeof(uint32_t), 0,
606	    BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
607	    sizeof(struct npestats), 1, sizeof(struct npestats), 0,
608	    busdma_lock_mutex, &sc->sc_mtx, &sc->sc_stats_tag);
609	if (error != 0) {
610		device_printf(sc->sc_dev, "unable to create stats tag, "
611		     "error %u\n", error);
612		return error;
613	}
614	if (bus_dmamem_alloc(sc->sc_stats_tag, (void **)&sc->sc_stats,
615	    BUS_DMA_NOWAIT, &sc->sc_stats_map) != 0) {
616		device_printf(sc->sc_dev,
617		     "unable to allocate memory for stats block, error %u\n",
618		     error);
619		return error;
620	}
621	if (bus_dmamap_load(sc->sc_stats_tag, sc->sc_stats_map,
622	    sc->sc_stats, sizeof(struct npestats), npe_getaddr, sc, 0) != 0) {
623		device_printf(sc->sc_dev,
624		     "unable to load memory for stats block, error %u\n",
625		     error);
626		return error;
627	}
628	sc->sc_stats_phys = sc->buf_phys;
629
630	/* XXX disable half-bridge LEARNING+FILTERING feature */
631
632	/*
633	 * Setup h/w rx/tx queues.  There are four q's:
634	 *   rx		inbound q of rx'd frames
635	 *   rx_free	pool of ixpbuf's for receiving frames
636	 *   tx		outbound q of frames to send
637	 *   tx_done	q of tx frames that have been processed
638	 *
639	 * The NPE handles the actual tx/rx process and the q manager
640	 * handles the queues.  The driver just writes entries to the
641	 * q manager mailbox's and gets callbacks when there are rx'd
642	 * frames to process or tx'd frames to reap.  These callbacks
643	 * are controlled by the q configurations; e.g. we get a
644	 * callback when tx_done has 2 or more frames to process and
645	 * when the rx q has at least one frame.  These setings can
646	 * changed at the time the q is configured.
647	 */
648	sc->rx_qid = npeconfig[unit].rx_qid;
649	ixpqmgr_qconfig(sc->rx_qid, npe_rxbuf, 0,  1,
650		IX_QMGR_Q_SOURCE_ID_NOT_E, npe_rxdone, sc);
651	sc->rx_freeqid = npeconfig[unit].rx_freeqid;
652	ixpqmgr_qconfig(sc->rx_freeqid,	npe_rxbuf, 0, npe_rxbuf/2, 0, NULL, sc);
653	/* tell the NPE to direct all traffic to rx_qid */
654#if 0
655	for (i = 0; i < 8; i++)
656#else
657device_printf(sc->sc_dev, "remember to fix rx q setup\n");
658	for (i = 0; i < 4; i++)
659#endif
660		npe_setrxqosentry(sc, i, 0, sc->rx_qid);
661
662	sc->tx_qid = npeconfig[unit].tx_qid;
663	sc->tx_doneqid = npeconfig[unit].tx_doneqid;
664	ixpqmgr_qconfig(sc->tx_qid, npe_txbuf, 0, npe_txbuf, 0, NULL, sc);
665	if (tx_doneqid == -1) {
666		ixpqmgr_qconfig(sc->tx_doneqid,	npe_txbuf, 0,  2,
667			IX_QMGR_Q_SOURCE_ID_NOT_E, npe_txdone, sc);
668		tx_doneqid = sc->tx_doneqid;
669	}
670
671	KASSERT(npes[npeconfig[unit].npeid] == NULL,
672	    ("npe %u already setup", npeconfig[unit].npeid));
673	npes[npeconfig[unit].npeid] = sc;
674
675	return 0;
676}
677
678static void
679npe_deactivate(device_t dev)
680{
681	struct npe_softc *sc = device_get_softc(dev);
682	int unit = device_get_unit(dev);
683
684	npes[npeconfig[unit].npeid] = NULL;
685
686	/* XXX disable q's */
687	if (sc->sc_npe != NULL)
688		ixpnpe_stop(sc->sc_npe);
689	if (sc->sc_stats != NULL) {
690		bus_dmamap_unload(sc->sc_stats_tag, sc->sc_stats_map);
691		bus_dmamem_free(sc->sc_stats_tag, sc->sc_stats,
692			sc->sc_stats_map);
693		bus_dmamap_destroy(sc->sc_stats_tag, sc->sc_stats_map);
694	}
695	if (sc->sc_stats_tag != NULL)
696		bus_dma_tag_destroy(sc->sc_stats_tag);
697	npe_dma_destroy(sc, &sc->txdma);
698	npe_dma_destroy(sc, &sc->rxdma);
699	bus_generic_detach(sc->sc_dev);
700	if (sc->sc_mii)
701		device_delete_child(sc->sc_dev, sc->sc_mii);
702#if 0
703	/* XXX sc_ioh and sc_miih */
704	if (sc->mem_res)
705		bus_release_resource(dev, SYS_RES_IOPORT,
706		    rman_get_rid(sc->mem_res), sc->mem_res);
707	sc->mem_res = 0;
708#endif
709}
710
711/*
712 * Change media according to request.
713 */
714static int
715npe_ifmedia_update(struct ifnet *ifp)
716{
717	struct npe_softc *sc = ifp->if_softc;
718	struct mii_data *mii;
719
720	mii = device_get_softc(sc->sc_mii);
721	NPE_LOCK(sc);
722	mii_mediachg(mii);
723	/* XXX push state ourself? */
724	NPE_UNLOCK(sc);
725	return (0);
726}
727
728/*
729 * Notify the world which media we're using.
730 */
731static void
732npe_ifmedia_status(struct ifnet *ifp, struct ifmediareq *ifmr)
733{
734	struct npe_softc *sc = ifp->if_softc;
735	struct mii_data *mii;
736
737	mii = device_get_softc(sc->sc_mii);
738	NPE_LOCK(sc);
739	mii_pollstat(mii);
740	ifmr->ifm_active = mii->mii_media_active;
741	ifmr->ifm_status = mii->mii_media_status;
742	NPE_UNLOCK(sc);
743}
744
745static void
746npe_addstats(struct npe_softc *sc)
747{
748#define	MIBADD(x)	sc->mibdata.x += be32toh(ns->x)
749	struct ifnet *ifp = sc->sc_ifp;
750	struct npestats *ns = sc->sc_stats;
751
752	MIBADD(dot3StatsAlignmentErrors);
753	MIBADD(dot3StatsFCSErrors);
754	MIBADD(dot3StatsSingleCollisionFrames);
755	MIBADD(dot3StatsMultipleCollisionFrames);
756	MIBADD(dot3StatsDeferredTransmissions);
757	MIBADD(dot3StatsLateCollisions);
758	MIBADD(dot3StatsExcessiveCollisions);
759	MIBADD(dot3StatsInternalMacTransmitErrors);
760	MIBADD(dot3StatsCarrierSenseErrors);
761	sc->mibdata.dot3StatsFrameTooLongs +=
762	      be32toh(ns->RxLargeFramesDiscards)
763	    + be32toh(ns->TxLargeFrameDiscards);
764	MIBADD(dot3StatsInternalMacReceiveErrors);
765	sc->mibdata.dot3StatsMissedFrames +=
766	      be32toh(ns->RxOverrunDiscards)
767	    + be32toh(ns->RxUnderflowEntryDiscards);
768
769	ifp->if_oerrors +=
770		  be32toh(ns->dot3StatsInternalMacTransmitErrors)
771		+ be32toh(ns->dot3StatsCarrierSenseErrors)
772		+ be32toh(ns->TxVLANIdFilterDiscards)
773		;
774	ifp->if_ierrors += be32toh(ns->dot3StatsFCSErrors)
775		+ be32toh(ns->dot3StatsInternalMacReceiveErrors)
776		+ be32toh(ns->RxOverrunDiscards)
777		+ be32toh(ns->RxUnderflowEntryDiscards)
778		;
779	ifp->if_collisions +=
780		  be32toh(ns->dot3StatsSingleCollisionFrames)
781		+ be32toh(ns->dot3StatsMultipleCollisionFrames)
782		;
783#undef MIBADD
784}
785
786static void
787npe_tick(void *xsc)
788{
789#define	ACK	(NPE_RESETSTATS << NPE_MAC_MSGID_SHL)
790	struct npe_softc *sc = xsc;
791	struct mii_data *mii = device_get_softc(sc->sc_mii);
792	uint32_t msg[2];
793
794	NPE_ASSERT_LOCKED(sc);
795
796	/*
797	 * NB: to avoid sleeping with the softc lock held we
798	 * split the NPE msg processing into two parts.  The
799	 * request for statistics is sent w/o waiting for a
800	 * reply and then on the next tick we retrieve the
801	 * results.  This works because npe_tick is the only
802	 * code that talks via the mailbox's (except at setup).
803	 * This likely can be handled better.
804	 */
805	if (ixpnpe_recvmsg(sc->sc_npe, msg) == 0 && msg[0] == ACK) {
806		bus_dmamap_sync(sc->sc_stats_tag, sc->sc_stats_map,
807		    BUS_DMASYNC_POSTREAD);
808		npe_addstats(sc);
809	}
810	npe_updatestats(sc);
811	mii_tick(mii);
812
813	npewatchdog(sc);
814
815	/* schedule next poll */
816	callout_reset(&sc->tick_ch, sc->sc_tickinterval * hz, npe_tick, sc);
817#undef ACK
818}
819
820static void
821npe_setmac(struct npe_softc *sc, u_char *eaddr)
822{
823	WR4(sc, NPE_MAC_UNI_ADDR_1, eaddr[0]);
824	WR4(sc, NPE_MAC_UNI_ADDR_2, eaddr[1]);
825	WR4(sc, NPE_MAC_UNI_ADDR_3, eaddr[2]);
826	WR4(sc, NPE_MAC_UNI_ADDR_4, eaddr[3]);
827	WR4(sc, NPE_MAC_UNI_ADDR_5, eaddr[4]);
828	WR4(sc, NPE_MAC_UNI_ADDR_6, eaddr[5]);
829
830}
831
832static void
833npe_getmac(struct npe_softc *sc, u_char *eaddr)
834{
835	/* NB: the unicast address appears to be loaded from EEPROM on reset */
836	eaddr[0] = RD4(sc, NPE_MAC_UNI_ADDR_1) & 0xff;
837	eaddr[1] = RD4(sc, NPE_MAC_UNI_ADDR_2) & 0xff;
838	eaddr[2] = RD4(sc, NPE_MAC_UNI_ADDR_3) & 0xff;
839	eaddr[3] = RD4(sc, NPE_MAC_UNI_ADDR_4) & 0xff;
840	eaddr[4] = RD4(sc, NPE_MAC_UNI_ADDR_5) & 0xff;
841	eaddr[5] = RD4(sc, NPE_MAC_UNI_ADDR_6) & 0xff;
842}
843
844struct txdone {
845	struct npebuf *head;
846	struct npebuf **tail;
847	int count;
848};
849
850static __inline void
851npe_txdone_finish(struct npe_softc *sc, const struct txdone *td)
852{
853	struct ifnet *ifp = sc->sc_ifp;
854
855	NPE_LOCK(sc);
856	*td->tail = sc->tx_free;
857	sc->tx_free = td->head;
858	/*
859	 * We're no longer busy, so clear the busy flag and call the
860	 * start routine to xmit more packets.
861	 */
862	ifp->if_opackets += td->count;
863	ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
864	sc->npe_watchdog_timer = 0;
865	npestart_locked(ifp);
866	NPE_UNLOCK(sc);
867}
868
869/*
870 * Q manager callback on tx done queue.  Reap mbufs
871 * and return tx buffers to the free list.  Finally
872 * restart output.  Note the microcode has only one
873 * txdone q wired into it so we must use the NPE ID
874 * returned with each npehwbuf to decide where to
875 * send buffers.
876 */
877static void
878npe_txdone(int qid, void *arg)
879{
880#define	P2V(a, dma) \
881	&(dma)->buf[((a) - (dma)->buf_phys) / sizeof(struct npehwbuf)]
882	struct npe_softc *sc0 = arg;
883	struct npe_softc *sc;
884	struct npebuf *npe;
885	struct txdone *td, q[NPE_MAX];
886	uint32_t entry;
887
888	/* XXX no NPE-A support */
889	q[NPE_B].tail = &q[NPE_B].head; q[NPE_B].count = 0;
890	q[NPE_C].tail = &q[NPE_C].head; q[NPE_C].count = 0;
891	/* XXX max # at a time? */
892	while (ixpqmgr_qread(qid, &entry) == 0) {
893		DPRINTF(sc0, "%s: entry 0x%x NPE %u port %u\n",
894		    __func__, entry, NPE_QM_Q_NPE(entry), NPE_QM_Q_PORT(entry));
895
896		sc = npes[NPE_QM_Q_NPE(entry)];
897		npe = P2V(NPE_QM_Q_ADDR(entry), &sc->txdma);
898		m_freem(npe->ix_m);
899		npe->ix_m = NULL;
900
901		td = &q[NPE_QM_Q_NPE(entry)];
902		*td->tail = npe;
903		td->tail = &npe->ix_next;
904		td->count++;
905	}
906
907	if (q[NPE_B].count)
908		npe_txdone_finish(npes[NPE_B], &q[NPE_B]);
909	if (q[NPE_C].count)
910		npe_txdone_finish(npes[NPE_C], &q[NPE_C]);
911#undef P2V
912}
913
914static int
915npe_rxbuf_init(struct npe_softc *sc, struct npebuf *npe, struct mbuf *m)
916{
917	bus_dma_segment_t segs[1];
918	struct npedma *dma = &sc->rxdma;
919	struct npehwbuf *hw;
920	int error, nseg;
921
922	if (m == NULL) {
923		m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
924		if (m == NULL)
925			return ENOBUFS;
926	}
927	KASSERT(m->m_ext.ext_size >= 1536 + ETHER_ALIGN,
928		("ext_size %d", m->m_ext.ext_size));
929	m->m_pkthdr.len = m->m_len = 1536;
930	/* backload payload and align ip hdr */
931	m->m_data = m->m_ext.ext_buf + (m->m_ext.ext_size - (1536+ETHER_ALIGN));
932	error = bus_dmamap_load_mbuf_sg(dma->mtag, npe->ix_map, m,
933			segs, &nseg, 0);
934	if (error != 0) {
935		m_freem(m);
936		return error;
937	}
938	hw = npe->ix_hw;
939	hw->ix_ne[0].data = htobe32(segs[0].ds_addr);
940	/* NB: NPE requires length be a multiple of 64 */
941	/* NB: buffer length is shifted in word */
942	hw->ix_ne[0].len = htobe32(segs[0].ds_len << 16);
943	hw->ix_ne[0].next = 0;
944	npe->ix_m = m;
945	/* Flush the memory in the mbuf */
946	bus_dmamap_sync(dma->mtag, npe->ix_map, BUS_DMASYNC_PREREAD);
947	return 0;
948}
949
950/*
951 * RX q processing for a specific NPE.  Claim entries
952 * from the hardware queue and pass the frames up the
953 * stack. Pass the rx buffers to the free list.
954 */
955static void
956npe_rxdone(int qid, void *arg)
957{
958#define	P2V(a, dma) \
959	&(dma)->buf[((a) - (dma)->buf_phys) / sizeof(struct npehwbuf)]
960	struct npe_softc *sc = arg;
961	struct npedma *dma = &sc->rxdma;
962	uint32_t entry;
963
964	while (ixpqmgr_qread(qid, &entry) == 0) {
965		struct npebuf *npe = P2V(NPE_QM_Q_ADDR(entry), dma);
966		struct mbuf *m;
967
968		DPRINTF(sc, "%s: entry 0x%x neaddr 0x%x ne_len 0x%x\n",
969		    __func__, entry, npe->ix_neaddr, npe->ix_hw->ix_ne[0].len);
970		/*
971		 * Allocate a new mbuf to replenish the rx buffer.
972		 * If doing so fails we drop the rx'd frame so we
973		 * can reuse the previous mbuf.  When we're able to
974		 * allocate a new mbuf dispatch the mbuf w/ rx'd
975		 * data up the stack and replace it with the newly
976		 * allocated one.
977		 */
978		m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
979		if (m != NULL) {
980			struct mbuf *mrx = npe->ix_m;
981			struct npehwbuf *hw = npe->ix_hw;
982			struct ifnet *ifp = sc->sc_ifp;
983
984			/* Flush mbuf memory for rx'd data */
985			bus_dmamap_sync(dma->mtag, npe->ix_map,
986			    BUS_DMASYNC_POSTREAD);
987
988			/* XXX flush hw buffer; works now 'cuz coherent */
989			/* set m_len etc. per rx frame size */
990			mrx->m_len = be32toh(hw->ix_ne[0].len) & 0xffff;
991			mrx->m_pkthdr.len = mrx->m_len;
992			mrx->m_pkthdr.rcvif = ifp;
993			mrx->m_flags |= M_HASFCS;
994
995			ifp->if_ipackets++;
996			ifp->if_input(ifp, mrx);
997		} else {
998			/* discard frame and re-use mbuf */
999			m = npe->ix_m;
1000		}
1001		if (npe_rxbuf_init(sc, npe, m) == 0) {
1002			/* return npe buf to rx free list */
1003			ixpqmgr_qwrite(sc->rx_freeqid, npe->ix_neaddr);
1004		} else {
1005			/* XXX should not happen */
1006		}
1007	}
1008#undef P2V
1009}
1010
1011#ifdef DEVICE_POLLING
1012static void
1013npe_poll(struct ifnet *ifp, enum poll_cmd cmd, int count)
1014{
1015	struct npe_softc *sc = ifp->if_softc;
1016
1017	if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
1018		npe_rxdone(sc->rx_qid, sc);
1019		npe_txdone(sc->tx_doneqid, sc);	/* XXX polls both NPE's */
1020	}
1021}
1022#endif /* DEVICE_POLLING */
1023
1024static void
1025npe_startxmit(struct npe_softc *sc)
1026{
1027	struct npedma *dma = &sc->txdma;
1028	int i;
1029
1030	NPE_ASSERT_LOCKED(sc);
1031	sc->tx_free = NULL;
1032	for (i = 0; i < dma->nbuf; i++) {
1033		struct npebuf *npe = &dma->buf[i];
1034		if (npe->ix_m != NULL) {
1035			/* NB: should not happen */
1036			device_printf(sc->sc_dev,
1037			    "%s: free mbuf at entry %u\n", __func__, i);
1038			m_freem(npe->ix_m);
1039		}
1040		npe->ix_m = NULL;
1041		npe->ix_next = sc->tx_free;
1042		sc->tx_free = npe;
1043	}
1044}
1045
1046static void
1047npe_startrecv(struct npe_softc *sc)
1048{
1049	struct npedma *dma = &sc->rxdma;
1050	struct npebuf *npe;
1051	int i;
1052
1053	NPE_ASSERT_LOCKED(sc);
1054	for (i = 0; i < dma->nbuf; i++) {
1055		npe = &dma->buf[i];
1056		npe_rxbuf_init(sc, npe, npe->ix_m);
1057		/* set npe buf on rx free list */
1058		ixpqmgr_qwrite(sc->rx_freeqid, npe->ix_neaddr);
1059	}
1060}
1061
1062/*
1063 * Reset and initialize the chip
1064 */
1065static void
1066npeinit_locked(void *xsc)
1067{
1068	struct npe_softc *sc = xsc;
1069	struct ifnet *ifp = sc->sc_ifp;
1070
1071	NPE_ASSERT_LOCKED(sc);
1072if (ifp->if_drv_flags & IFF_DRV_RUNNING) return;/*XXX*/
1073
1074	/*
1075	 * Reset MAC core.
1076	 */
1077	WR4(sc, NPE_MAC_CORE_CNTRL, NPE_CORE_RESET);
1078	DELAY(NPE_MAC_RESET_DELAY);
1079	/* configure MAC to generate MDC clock */
1080	WR4(sc, NPE_MAC_CORE_CNTRL, NPE_CORE_MDC_EN);
1081
1082	/* disable transmitter and reciver in the MAC */
1083 	WR4(sc, NPE_MAC_RX_CNTRL1,
1084	    RD4(sc, NPE_MAC_RX_CNTRL1) &~ NPE_RX_CNTRL1_RX_EN);
1085 	WR4(sc, NPE_MAC_TX_CNTRL1,
1086	    RD4(sc, NPE_MAC_TX_CNTRL1) &~ NPE_TX_CNTRL1_TX_EN);
1087
1088	/*
1089	 * Set the MAC core registers.
1090	 */
1091	WR4(sc, NPE_MAC_INT_CLK_THRESH, 0x1);	/* clock ratio: for ipx4xx */
1092	WR4(sc, NPE_MAC_TX_CNTRL2,	0xf);	/* max retries */
1093	WR4(sc, NPE_MAC_RANDOM_SEED,	0x8);	/* LFSR back-off seed */
1094	/* thresholds determined by NPE firmware FS */
1095	WR4(sc, NPE_MAC_THRESH_P_EMPTY,	0x12);
1096	WR4(sc, NPE_MAC_THRESH_P_FULL,	0x30);
1097	WR4(sc, NPE_MAC_BUF_SIZE_TX,	0x8);	/* tx fifo threshold (bytes) */
1098	WR4(sc, NPE_MAC_TX_DEFER,	0x15);	/* for single deferral */
1099	WR4(sc, NPE_MAC_RX_DEFER,	0x16);	/* deferral on inter-frame gap*/
1100	WR4(sc, NPE_MAC_TX_TWO_DEFER_1,	0x8);	/* for 2-part deferral */
1101	WR4(sc, NPE_MAC_TX_TWO_DEFER_2,	0x7);	/* for 2-part deferral */
1102	WR4(sc, NPE_MAC_SLOT_TIME,	0x80);	/* assumes MII mode */
1103
1104	WR4(sc, NPE_MAC_TX_CNTRL1,
1105		  NPE_TX_CNTRL1_RETRY		/* retry failed xmits */
1106		| NPE_TX_CNTRL1_FCS_EN		/* append FCS */
1107		| NPE_TX_CNTRL1_2DEFER		/* 2-part deferal */
1108		| NPE_TX_CNTRL1_PAD_EN);	/* pad runt frames */
1109	/* XXX pad strip? */
1110	WR4(sc, NPE_MAC_RX_CNTRL1,
1111		  NPE_RX_CNTRL1_CRC_EN		/* include CRC/FCS */
1112		| NPE_RX_CNTRL1_PAUSE_EN);	/* ena pause frame handling */
1113	WR4(sc, NPE_MAC_RX_CNTRL2, 0);
1114
1115	npe_setmac(sc, IF_LLADDR(ifp));
1116	npe_setmcast(sc);
1117
1118	npe_startxmit(sc);
1119	npe_startrecv(sc);
1120
1121	ifp->if_drv_flags |= IFF_DRV_RUNNING;
1122	ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
1123	sc->npe_watchdog_timer = 0;		/* just in case */
1124
1125	/* enable transmitter and reciver in the MAC */
1126 	WR4(sc, NPE_MAC_RX_CNTRL1,
1127	    RD4(sc, NPE_MAC_RX_CNTRL1) | NPE_RX_CNTRL1_RX_EN);
1128 	WR4(sc, NPE_MAC_TX_CNTRL1,
1129	    RD4(sc, NPE_MAC_TX_CNTRL1) | NPE_TX_CNTRL1_TX_EN);
1130
1131	callout_reset(&sc->tick_ch, sc->sc_tickinterval * hz, npe_tick, sc);
1132}
1133
1134static void
1135npeinit(void *xsc)
1136{
1137	struct npe_softc *sc = xsc;
1138	NPE_LOCK(sc);
1139	npeinit_locked(sc);
1140	NPE_UNLOCK(sc);
1141}
1142
1143/*
1144 * Defragment an mbuf chain, returning at most maxfrags separate
1145 * mbufs+clusters.  If this is not possible NULL is returned and
1146 * the original mbuf chain is left in it's present (potentially
1147 * modified) state.  We use two techniques: collapsing consecutive
1148 * mbufs and replacing consecutive mbufs by a cluster.
1149 */
1150static struct mbuf *
1151npe_defrag(struct mbuf *m0, int how, int maxfrags)
1152{
1153	struct mbuf *m, *n, *n2, **prev;
1154	u_int curfrags;
1155
1156	/*
1157	 * Calculate the current number of frags.
1158	 */
1159	curfrags = 0;
1160	for (m = m0; m != NULL; m = m->m_next)
1161		curfrags++;
1162	/*
1163	 * First, try to collapse mbufs.  Note that we always collapse
1164	 * towards the front so we don't need to deal with moving the
1165	 * pkthdr.  This may be suboptimal if the first mbuf has much
1166	 * less data than the following.
1167	 */
1168	m = m0;
1169again:
1170	for (;;) {
1171		n = m->m_next;
1172		if (n == NULL)
1173			break;
1174		if ((m->m_flags & M_RDONLY) == 0 &&
1175		    n->m_len < M_TRAILINGSPACE(m)) {
1176			bcopy(mtod(n, void *), mtod(m, char *) + m->m_len,
1177				n->m_len);
1178			m->m_len += n->m_len;
1179			m->m_next = n->m_next;
1180			m_free(n);
1181			if (--curfrags <= maxfrags)
1182				return m0;
1183		} else
1184			m = n;
1185	}
1186	KASSERT(maxfrags > 1,
1187		("maxfrags %u, but normal collapse failed", maxfrags));
1188	/*
1189	 * Collapse consecutive mbufs to a cluster.
1190	 */
1191	prev = &m0->m_next;		/* NB: not the first mbuf */
1192	while ((n = *prev) != NULL) {
1193		if ((n2 = n->m_next) != NULL &&
1194		    n->m_len + n2->m_len < MCLBYTES) {
1195			m = m_getcl(how, MT_DATA, 0);
1196			if (m == NULL)
1197				goto bad;
1198			bcopy(mtod(n, void *), mtod(m, void *), n->m_len);
1199			bcopy(mtod(n2, void *), mtod(m, char *) + n->m_len,
1200				n2->m_len);
1201			m->m_len = n->m_len + n2->m_len;
1202			m->m_next = n2->m_next;
1203			*prev = m;
1204			m_free(n);
1205			m_free(n2);
1206			if (--curfrags <= maxfrags)	/* +1 cl -2 mbufs */
1207				return m0;
1208			/*
1209			 * Still not there, try the normal collapse
1210			 * again before we allocate another cluster.
1211			 */
1212			goto again;
1213		}
1214		prev = &n->m_next;
1215	}
1216	/*
1217	 * No place where we can collapse to a cluster; punt.
1218	 * This can occur if, for example, you request 2 frags
1219	 * but the packet requires that both be clusters (we
1220	 * never reallocate the first mbuf to avoid moving the
1221	 * packet header).
1222	 */
1223bad:
1224	return NULL;
1225}
1226
1227/*
1228 * Dequeue packets and place on the h/w transmit queue.
1229 */
1230static void
1231npestart_locked(struct ifnet *ifp)
1232{
1233	struct npe_softc *sc = ifp->if_softc;
1234	struct npebuf *npe;
1235	struct npehwbuf *hw;
1236	struct mbuf *m, *n;
1237	struct npedma *dma = &sc->txdma;
1238	bus_dma_segment_t segs[NPE_MAXSEG];
1239	int nseg, len, error, i;
1240	uint32_t next;
1241
1242	NPE_ASSERT_LOCKED(sc);
1243	/* XXX can this happen? */
1244	if (ifp->if_drv_flags & IFF_DRV_OACTIVE)
1245		return;
1246
1247	while (sc->tx_free != NULL) {
1248		IFQ_DRV_DEQUEUE(&ifp->if_snd, m);
1249		if (m == NULL) {
1250			/* XXX? */
1251			ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
1252			return;
1253		}
1254		npe = sc->tx_free;
1255		error = bus_dmamap_load_mbuf_sg(dma->mtag, npe->ix_map,
1256		    m, segs, &nseg, 0);
1257		if (error == EFBIG) {
1258			n = npe_defrag(m, M_DONTWAIT, NPE_MAXSEG);
1259			if (n == NULL) {
1260				if_printf(ifp, "%s: too many fragments %u\n",
1261				    __func__, nseg);
1262				m_freem(m);
1263				return;	/* XXX? */
1264			}
1265			m = n;
1266			error = bus_dmamap_load_mbuf_sg(dma->mtag, npe->ix_map,
1267			    m, segs, &nseg, 0);
1268		}
1269		if (error != 0 || nseg == 0) {
1270			if_printf(ifp, "%s: error %u nseg %u\n",
1271			    __func__, error, nseg);
1272			m_freem(m);
1273			return;	/* XXX? */
1274		}
1275		sc->tx_free = npe->ix_next;
1276
1277		bus_dmamap_sync(dma->mtag, npe->ix_map, BUS_DMASYNC_PREWRITE);
1278
1279		/*
1280		 * Tap off here if there is a bpf listener.
1281		 */
1282		BPF_MTAP(ifp, m);
1283
1284		npe->ix_m = m;
1285		hw = npe->ix_hw;
1286		len = m->m_pkthdr.len;
1287		next = npe->ix_neaddr + sizeof(hw->ix_ne[0]);
1288		for (i = 0; i < nseg; i++) {
1289			hw->ix_ne[i].data = htobe32(segs[i].ds_addr);
1290			hw->ix_ne[i].len = htobe32((segs[i].ds_len<<16) | len);
1291			hw->ix_ne[i].next = htobe32(next);
1292
1293			len = 0;		/* zero for segments > 1 */
1294			next += sizeof(hw->ix_ne[0]);
1295		}
1296		hw->ix_ne[i-1].next = 0;	/* zero last in chain */
1297		/* XXX flush descriptor instead of using uncached memory */
1298
1299		DPRINTF(sc, "%s: qwrite(%u, 0x%x) ne_data %x ne_len 0x%x\n",
1300		    __func__, sc->tx_qid, npe->ix_neaddr,
1301		    hw->ix_ne[0].data, hw->ix_ne[0].len);
1302		/* stick it on the tx q */
1303		/* XXX add vlan priority */
1304		ixpqmgr_qwrite(sc->tx_qid, npe->ix_neaddr);
1305
1306		sc->npe_watchdog_timer = 5;
1307	}
1308	if (sc->tx_free == NULL)
1309		ifp->if_drv_flags |= IFF_DRV_OACTIVE;
1310}
1311
1312void
1313npestart(struct ifnet *ifp)
1314{
1315	struct npe_softc *sc = ifp->if_softc;
1316	NPE_LOCK(sc);
1317	npestart_locked(ifp);
1318	NPE_UNLOCK(sc);
1319}
1320
1321static void
1322npe_stopxmit(struct npe_softc *sc)
1323{
1324	struct npedma *dma = &sc->txdma;
1325	int i;
1326
1327	NPE_ASSERT_LOCKED(sc);
1328
1329	/* XXX qmgr */
1330	for (i = 0; i < dma->nbuf; i++) {
1331		struct npebuf *npe = &dma->buf[i];
1332
1333		if (npe->ix_m != NULL) {
1334			bus_dmamap_unload(dma->mtag, npe->ix_map);
1335			m_freem(npe->ix_m);
1336			npe->ix_m = NULL;
1337		}
1338	}
1339}
1340
1341static void
1342npe_stoprecv(struct npe_softc *sc)
1343{
1344	struct npedma *dma = &sc->rxdma;
1345	int i;
1346
1347	NPE_ASSERT_LOCKED(sc);
1348
1349	/* XXX qmgr */
1350	for (i = 0; i < dma->nbuf; i++) {
1351		struct npebuf *npe = &dma->buf[i];
1352
1353		if (npe->ix_m != NULL) {
1354			bus_dmamap_unload(dma->mtag, npe->ix_map);
1355			m_freem(npe->ix_m);
1356			npe->ix_m = NULL;
1357		}
1358	}
1359}
1360
1361/*
1362 * Turn off interrupts, and stop the nic.
1363 */
1364void
1365npestop(struct npe_softc *sc)
1366{
1367	struct ifnet *ifp = sc->sc_ifp;
1368
1369	/*  disable transmitter and reciver in the MAC  */
1370 	WR4(sc, NPE_MAC_RX_CNTRL1,
1371	    RD4(sc, NPE_MAC_RX_CNTRL1) &~ NPE_RX_CNTRL1_RX_EN);
1372 	WR4(sc, NPE_MAC_TX_CNTRL1,
1373	    RD4(sc, NPE_MAC_TX_CNTRL1) &~ NPE_TX_CNTRL1_TX_EN);
1374
1375	sc->npe_watchdog_timer = 0;
1376	ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
1377
1378	callout_stop(&sc->tick_ch);
1379
1380	npe_stopxmit(sc);
1381	npe_stoprecv(sc);
1382	/* XXX go into loopback & drain q's? */
1383	/* XXX but beware of disabling tx above */
1384
1385	/*
1386	 * The MAC core rx/tx disable may leave the MAC hardware in an
1387	 * unpredictable state. A hw reset is executed before resetting
1388	 * all the MAC parameters to a known value.
1389	 */
1390	WR4(sc, NPE_MAC_CORE_CNTRL, NPE_CORE_RESET);
1391	DELAY(NPE_MAC_RESET_DELAY);
1392	WR4(sc, NPE_MAC_INT_CLK_THRESH, NPE_MAC_INT_CLK_THRESH_DEFAULT);
1393	WR4(sc, NPE_MAC_CORE_CNTRL, NPE_CORE_MDC_EN);
1394}
1395
1396void
1397npewatchdog(struct npe_softc *sc)
1398{
1399	NPE_ASSERT_LOCKED(sc);
1400
1401	if (sc->npe_watchdog_timer == 0 || --sc->npe_watchdog_timer != 0)
1402		return;
1403
1404	device_printf(sc->sc_dev, "watchdog timeout\n");
1405	sc->sc_ifp->if_oerrors++;
1406
1407	npeinit_locked(sc);
1408}
1409
1410static int
1411npeioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
1412{
1413	struct npe_softc *sc = ifp->if_softc;
1414 	struct mii_data *mii;
1415 	struct ifreq *ifr = (struct ifreq *)data;
1416	int error = 0;
1417#ifdef DEVICE_POLLING
1418	int mask;
1419#endif
1420
1421	switch (cmd) {
1422	case SIOCSIFFLAGS:
1423		NPE_LOCK(sc);
1424		if ((ifp->if_flags & IFF_UP) == 0 &&
1425		    ifp->if_drv_flags & IFF_DRV_RUNNING) {
1426			ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
1427			npestop(sc);
1428		} else {
1429			/* reinitialize card on any parameter change */
1430			npeinit_locked(sc);
1431		}
1432		NPE_UNLOCK(sc);
1433		break;
1434
1435	case SIOCADDMULTI:
1436	case SIOCDELMULTI:
1437		/* update multicast filter list. */
1438		NPE_LOCK(sc);
1439		npe_setmcast(sc);
1440		NPE_UNLOCK(sc);
1441		error = 0;
1442		break;
1443
1444  	case SIOCSIFMEDIA:
1445  	case SIOCGIFMEDIA:
1446 		mii = device_get_softc(sc->sc_mii);
1447 		error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, cmd);
1448  		break;
1449
1450#ifdef DEVICE_POLLING
1451	case SIOCSIFCAP:
1452		mask = ifp->if_capenable ^ ifr->ifr_reqcap;
1453		if (mask & IFCAP_POLLING) {
1454			if (ifr->ifr_reqcap & IFCAP_POLLING) {
1455				error = ether_poll_register(npe_poll, ifp);
1456				if (error)
1457					return error;
1458				NPE_LOCK(sc);
1459				/* disable callbacks XXX txdone is shared */
1460				ixpqmgr_notify_disable(sc->rx_qid);
1461				ixpqmgr_notify_disable(sc->tx_doneqid);
1462				ifp->if_capenable |= IFCAP_POLLING;
1463				NPE_UNLOCK(sc);
1464			} else {
1465				error = ether_poll_deregister(ifp);
1466				/* NB: always enable qmgr callbacks */
1467				NPE_LOCK(sc);
1468				/* enable qmgr callbacks */
1469				ixpqmgr_notify_enable(sc->rx_qid,
1470				    IX_QMGR_Q_SOURCE_ID_NOT_E);
1471				ixpqmgr_notify_enable(sc->tx_doneqid,
1472				    IX_QMGR_Q_SOURCE_ID_NOT_E);
1473				ifp->if_capenable &= ~IFCAP_POLLING;
1474				NPE_UNLOCK(sc);
1475			}
1476		}
1477		break;
1478#endif
1479	default:
1480		error = ether_ioctl(ifp, cmd, data);
1481		break;
1482	}
1483	return error;
1484}
1485
1486/*
1487 * Setup a traffic class -> rx queue mapping.
1488 */
1489static int
1490npe_setrxqosentry(struct npe_softc *sc, int classix, int trafclass, int qid)
1491{
1492	int npeid = npeconfig[device_get_unit(sc->sc_dev)].npeid;
1493	uint32_t msg[2];
1494
1495	msg[0] = (NPE_SETRXQOSENTRY << 24) | (npeid << 20) | classix;
1496	msg[1] = (trafclass << 24) | (1 << 23) | (qid << 16) | (qid << 4);
1497	return ixpnpe_sendandrecvmsg(sc->sc_npe, msg, msg);
1498}
1499
1500/*
1501 * Update and reset the statistics in the NPE.
1502 */
1503static int
1504npe_updatestats(struct npe_softc *sc)
1505{
1506	uint32_t msg[2];
1507
1508	msg[0] = NPE_RESETSTATS << NPE_MAC_MSGID_SHL;
1509	msg[1] = sc->sc_stats_phys;	/* physical address of stat block */
1510	return ixpnpe_sendmsg(sc->sc_npe, msg);		/* NB: no recv */
1511}
1512
1513#if 0
1514/*
1515 * Get the current statistics block.
1516 */
1517static int
1518npe_getstats(struct npe_softc *sc)
1519{
1520	uint32_t msg[2];
1521
1522	msg[0] = NPE_GETSTATS << NPE_MAC_MSGID_SHL;
1523	msg[1] = sc->sc_stats_phys;	/* physical address of stat block */
1524	return ixpnpe_sendandrecvmsg(sc->sc_npe, msg, msg);
1525}
1526
1527/*
1528 * Query the image id of the loaded firmware.
1529 */
1530static uint32_t
1531npe_getimageid(struct npe_softc *sc)
1532{
1533	uint32_t msg[2];
1534
1535	msg[0] = NPE_GETSTATUS << NPE_MAC_MSGID_SHL;
1536	msg[1] = 0;
1537	return ixpnpe_sendandrecvmsg(sc->sc_npe, msg, msg) == 0 ? msg[1] : 0;
1538}
1539
1540/*
1541 * Enable/disable loopback.
1542 */
1543static int
1544npe_setloopback(struct npe_softc *sc, int ena)
1545{
1546	uint32_t msg[2];
1547
1548	msg[0] = (NPE_SETLOOPBACK << NPE_MAC_MSGID_SHL) | (ena != 0);
1549	msg[1] = 0;
1550	return ixpnpe_sendandrecvmsg(sc->sc_npe, msg, msg);
1551}
1552#endif
1553
1554static void
1555npe_child_detached(device_t dev, device_t child)
1556{
1557	struct npe_softc *sc;
1558
1559	sc = device_get_softc(dev);
1560	if (child == sc->sc_mii)
1561		sc->sc_mii = NULL;
1562}
1563
1564/*
1565 * MII bus support routines.
1566 *
1567 * NB: ixp425 has one PHY per NPE
1568 */
1569static uint32_t
1570npe_mii_mdio_read(struct npe_softc *sc, int reg)
1571{
1572#define	MII_RD4(sc, reg)	bus_space_read_4(sc->sc_iot, sc->sc_miih, reg)
1573	uint32_t v;
1574
1575	/* NB: registers are known to be sequential */
1576	v =  (MII_RD4(sc, reg+0) & 0xff) << 0;
1577	v |= (MII_RD4(sc, reg+4) & 0xff) << 8;
1578	v |= (MII_RD4(sc, reg+8) & 0xff) << 16;
1579	v |= (MII_RD4(sc, reg+12) & 0xff) << 24;
1580	return v;
1581#undef MII_RD4
1582}
1583
1584static void
1585npe_mii_mdio_write(struct npe_softc *sc, int reg, uint32_t cmd)
1586{
1587#define	MII_WR4(sc, reg, v) \
1588	bus_space_write_4(sc->sc_iot, sc->sc_miih, reg, v)
1589
1590	/* NB: registers are known to be sequential */
1591	MII_WR4(sc, reg+0, cmd & 0xff);
1592	MII_WR4(sc, reg+4, (cmd >> 8) & 0xff);
1593	MII_WR4(sc, reg+8, (cmd >> 16) & 0xff);
1594	MII_WR4(sc, reg+12, (cmd >> 24) & 0xff);
1595#undef MII_WR4
1596}
1597
1598static int
1599npe_mii_mdio_wait(struct npe_softc *sc)
1600{
1601#define	MAXTRIES	100	/* XXX */
1602	uint32_t v;
1603	int i;
1604
1605	for (i = 0; i < MAXTRIES; i++) {
1606		v = npe_mii_mdio_read(sc, NPE_MAC_MDIO_CMD);
1607		if ((v & NPE_MII_GO) == 0)
1608			return 1;
1609	}
1610	return 0;		/* NB: timeout */
1611#undef MAXTRIES
1612}
1613
1614static int
1615npe_miibus_readreg(device_t dev, int phy, int reg)
1616{
1617	struct npe_softc *sc = device_get_softc(dev);
1618	uint32_t v;
1619
1620	if (phy != device_get_unit(dev))	/* XXX */
1621		return 0xffff;
1622	v = (phy << NPE_MII_ADDR_SHL) | (reg << NPE_MII_REG_SHL)
1623	  | NPE_MII_GO;
1624	npe_mii_mdio_write(sc, NPE_MAC_MDIO_CMD, v);
1625	if (npe_mii_mdio_wait(sc))
1626		v = npe_mii_mdio_read(sc, NPE_MAC_MDIO_STS);
1627	else
1628		v = 0xffff | NPE_MII_READ_FAIL;
1629	return (v & NPE_MII_READ_FAIL) ? 0xffff : (v & 0xffff);
1630#undef MAXTRIES
1631}
1632
1633static void
1634npe_miibus_writereg(device_t dev, int phy, int reg, int data)
1635{
1636	struct npe_softc *sc = device_get_softc(dev);
1637	uint32_t v;
1638
1639	if (phy != device_get_unit(dev))	/* XXX */
1640		return;
1641	v = (phy << NPE_MII_ADDR_SHL) | (reg << NPE_MII_REG_SHL)
1642	  | data | NPE_MII_WRITE
1643	  | NPE_MII_GO;
1644	npe_mii_mdio_write(sc, NPE_MAC_MDIO_CMD, v);
1645	/* XXX complain about timeout */
1646	(void) npe_mii_mdio_wait(sc);
1647}
1648
1649static void
1650npe_miibus_statchg(device_t dev)
1651{
1652	struct npe_softc *sc = device_get_softc(dev);
1653	struct mii_data *mii = device_get_softc(sc->sc_mii);
1654	uint32_t tx1, rx1;
1655
1656	/* sync MAC duplex state */
1657	tx1 = RD4(sc, NPE_MAC_TX_CNTRL1);
1658	rx1 = RD4(sc, NPE_MAC_RX_CNTRL1);
1659	if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) {
1660		tx1 &= ~NPE_TX_CNTRL1_DUPLEX;
1661		rx1 |= NPE_RX_CNTRL1_PAUSE_EN;
1662	} else {
1663		tx1 |= NPE_TX_CNTRL1_DUPLEX;
1664		rx1 &= ~NPE_RX_CNTRL1_PAUSE_EN;
1665	}
1666	WR4(sc, NPE_MAC_RX_CNTRL1, rx1);
1667	WR4(sc, NPE_MAC_TX_CNTRL1, tx1);
1668}
1669
1670static device_method_t npe_methods[] = {
1671	/* Device interface */
1672	DEVMETHOD(device_probe,		npe_probe),
1673	DEVMETHOD(device_attach,	npe_attach),
1674	DEVMETHOD(device_detach,	npe_detach),
1675
1676	/* Bus interface */
1677	DEVMETHOD(bus_child_detached,	npe_child_detached),
1678
1679	/* MII interface */
1680	DEVMETHOD(miibus_readreg,	npe_miibus_readreg),
1681	DEVMETHOD(miibus_writereg,	npe_miibus_writereg),
1682	DEVMETHOD(miibus_statchg,	npe_miibus_statchg),
1683
1684	{ 0, 0 }
1685};
1686
1687static driver_t npe_driver = {
1688	"npe",
1689	npe_methods,
1690	sizeof(struct npe_softc),
1691};
1692
1693DRIVER_MODULE(npe, ixp, npe_driver, npe_devclass, 0, 0);
1694DRIVER_MODULE(miibus, npe, miibus_driver, miibus_devclass, 0, 0);
1695MODULE_DEPEND(npe, ixpqmgr, 1, 1, 1);
1696MODULE_DEPEND(npe, miibus, 1, 1, 1);
1697MODULE_DEPEND(npe, ether, 1, 1, 1);
1698