DREAMPLUG-1001 revision 294413
1# Kernel config for GlobalScale Technologies DreamPlug version 1001. 2# 3# This is for units that are version 10, revision 01, with NOR SPI flash. 4# These units are identified with the number "1001" on the S/N label. 5# 6# For more information on this file, please read the handbook section on 7# Kernel Configuration Files: 8# 9# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html 10# 11# The handbook is also available locally in /usr/share/doc/handbook 12# if you've installed the doc distribution, otherwise always see the 13# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the 14# latest information. 15# 16# An exhaustive list of options and more detailed explanations of the 17# device lines is also present in the ../../conf/NOTES and NOTES files. 18# If you are in doubt as to the purpose or necessity of a line, check first 19# in NOTES. 20# 21# $FreeBSD: head/sys/arm/conf/DREAMPLUG-1001 294413 2016-01-20 11:57:11Z zbb $ 22# 23#NO_UNIVERSE 24 25ident DREAMPLUG-1001 26 27include "std.arm" 28include "../mv/kirkwood/std.db88f6xxx" 29 30options SOC_MV_KIRKWOOD 31 32options SCHED_4BSD # 4BSD scheduler 33options INET # InterNETworking 34options INET6 # IPv6 communications protocols 35options FFS # Berkeley Fast Filesystem 36options SOFTUPDATES # Enable FFS soft updates support 37options NFSCL # Network Filesystem Client 38options NFSLOCKD # Network Lock Manager 39#options NFS_ROOT # NFS usable as /, requires NFSCL 40options MSDOSFS # MSDOS Filesystem 41options CD9660 # ISO 9660 filesystem 42options NULLFS # NULL filesystem 43options TMPFS # Efficient memory filesystem 44options GEOM_PART_GPT # GUID Partition Tables 45options GEOM_PART_BSD # BSD partition scheme 46options GEOM_PART_MBR # MBR partition scheme 47options GEOM_LABEL # Provides labelization 48options GEOM_ELI # Disk encryption 49options SYSVSHM # SYSV-style shared memory 50options SYSVMSG # SYSV-style message queues 51options SYSVSEM # SYSV-style semaphores 52options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions 53 54# Debugging for use in -current 55makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols 56options ALT_BREAK_TO_DEBUGGER 57options KDB # Enable kernel debugger support 58options DDB # Enable the kernel debugger 59options INVARIANTS # Enable calls of extra sanity checking 60options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS 61#options WITNESS # Enable checks to detect deadlocks and cycles 62#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed 63#options WITNESS_KDB 64#options DIAGNOSTIC 65 66# Enable these options for nfs root configured via BOOTP. 67#options BOOTP 68#options BOOTP_NFSROOT 69#options BOOTP_NFSV3 70#options BOOTP_WIRED_TO=mge0 71 72# If not using BOOTP, use something like one of these... 73#options ROOTDEVNAME=\"ufs:/dev/da1a\" 74options ROOTDEVNAME=\"ufs:/dev/da1s1a\" 75#options ROOTDEVNAME=\"ufs:/dev/da1p10\" 76#options ROOTDEVNAME=\"nfs:192.168.0.254/dreamplug\" 77 78# Misc pseudo devices 79device bpf # Required for DHCP 80device firmware # firmware(9) required for USB wlan 81device gif # IPv6 and IPv4 tunneling 82device loop # Network loopback 83device md # Memory/malloc disk 84device pty # BSD-style compatibility pseudo ttys 85device random # Entropy device 86device tun # Packet tunnel. 87device ether # Required for all ethernet devices 88device vlan # 802.1Q VLAN support 89device wlan # 802.11 WLAN support 90 91# cam support for umass and ahci 92device scbus 93device pass 94device da 95device cd 96 97# Serial ports 98device uart 99 100# Networking 101device mge # Marvell Gigabit Ethernet controller 102device mii 103device mdio 104device e1000phy 105 106# USB 107options USB_HOST_ALIGN=32 # Align DMA to cacheline 108#options USB_DEBUG # Compile in USB debug support 109device usb # Basic usb support 110device ehci # USB host controller 111device umass # Mass storage 112device uhid # Human-interface devices 113device rum # Ralink Technology RT2501USB wireless NICs 114device uath # Atheros AR5523 wireless NICs 115device ural # Ralink Technology RT2500USB wireless NICs 116device zyd # ZyDAS zb1211/zb1211b wireless NICs 117device urtw # Realtek RTL8187B/L USB 118device upgt # Conexant/Intersil PrismGT SoftMAC USB 119device u3g # USB-based 3G modems (Option, Huawei, Sierra) 120 121# I2C (TWSI) 122device iic 123device iicbus 124 125# GPIO 126device gpio 127 128# SATA 129device mvs 130device ahci 131 132# Sound 133device sound 134device snd_uaudio 135 136#crypto 137device cesa # Marvell security engine 138device crypto 139device cryptodev 140 141# IPSec 142device enc 143options IPSEC 144options IPSEC_NAT_T 145options TCP_SIGNATURE # include support for RFC 2385 146 147# IPFW 148options IPFIREWALL 149options IPFIREWALL_DEFAULT_TO_ACCEPT 150options IPFIREWALL_VERBOSE 151options IPFIREWALL_VERBOSE_LIMIT=100 152options IPFIREWALL_NAT 153options LIBALIAS 154options DUMMYNET 155options IPDIVERT 156 157#PF 158device pf 159device pflog 160device pfsync 161 162# ALTQ, required for PF 163options ALTQ # Basic ALTQ support 164options ALTQ_CBQ # Class Based Queueing 165options ALTQ_RED # Random Early Detection 166options ALTQ_RIO # RED In/Out 167options ALTQ_HFSC # Hierarchical Packet Scheduler 168options ALTQ_CDNR # Traffic conditioner 169options ALTQ_PRIQ # Priority Queueing 170options ALTQ_NOPCC # Required if the TSC is unusable 171#options ALTQ_DEBUG 172 173# To use this configuration with the (rare) model 1001N (nand flash), 174# create a kernel config file that looks like this: 175# 176# include DREAMPLUG-1001 177# nomakeoptions FDT_DTS_FILE 178# makeoptions FDT_DTS_FILE=dreamplug-1001N.dts 179# device nand 180 181# Flattened Device Tree 182options FDT # Configure using FDT/DTB data 183options FDT_DTB_STATIC 184makeoptions FDT_DTS_FILE=dreamplug-1001.dts 185