GENERIC revision 45668
1# 2# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks 3# 4# For more information read the handbook part System Administration -> 5# Configuring the FreeBSD Kernel -> The Configuration File. 6# The handbook is available in /usr/share/doc/handbook or online as 7# latest version from the FreeBSD World Wide Web server 8# <URL:http://www.FreeBSD.ORG/> 9# 10# An exhaustive list of options and more detailed explanations of the 11# device lines is present in the ./LINT configuration file. If you are 12# in doubt as to the purpose or necessity of a line, check first in LINT. 13# 14# $Id: GENERIC,v 1.158 1999/04/13 19:38:09 peter Exp $ 15 16machine "i386" 17cpu "I386_CPU" 18cpu "I486_CPU" 19cpu "I586_CPU" 20cpu "I686_CPU" 21ident GENERIC 22maxusers 32 23 24#makeoptions DEBUG="-g" #Build kernel with gdb(1) debug symbols 25 26options MATH_EMULATE #Support for x87 emulation 27options INET #InterNETworking 28options FFS #Berkeley Fast Filesystem 29options FFS_ROOT #FFS usable as root device [keep this!] 30options MFS #Memory Filesystem 31options MFS_ROOT #MFS usable as root device, "MFS" req'ed 32options NFS #Network Filesystem 33options NFS_ROOT #NFS usable as root device, "NFS" req'ed 34options MSDOSFS #MSDOS Filesystem 35options "CD9660" #ISO 9660 Filesystem 36options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed 37options PROCFS #Process filesystem 38options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] 39options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device 40options UCONSOLE #Allow users to grab the console 41options FAILSAFE #Be conservative 42options USERCONFIG #boot -c editor 43options VISUAL_USERCONFIG #visual boot -c editor 44 45config kernel root on wd0 46 47# To make an SMP kernel, the next two are needed 48#options SMP # Symmetric MultiProcessor Kernel 49#options APIC_IO # Symmetric (APIC) I/O 50# Optionally these may need tweaked, (defaults shown): 51#options NCPU=2 # number of CPUs 52#options NBUS=4 # number of busses 53#options NAPIC=1 # number of IO APICs 54#options NINTR=24 # number of INTs 55 56controller isa0 57controller pnp0 # PnP support for ISA 58controller eisa0 59controller pci0 60 61controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 62disk fd0 at fdc0 drive 0 63disk fd1 at fdc0 drive 1 64 65controller wdc0 at isa? port "IO_WD1" bio irq 14 66disk wd0 at wdc0 drive 0 67disk wd1 at wdc0 drive 1 68 69controller wdc1 at isa? port "IO_WD2" bio irq 15 70disk wd2 at wdc1 drive 0 71disk wd3 at wdc1 drive 1 72 73device wcd0 #IDE CD-ROM 74device wfd0 #IDE Floppy (e.g. LS-120) 75 76# A single entry for any of these controllers (ncr, ahb, ahc) is 77# sufficient for any number of installed devices. 78controller ncr0 79controller ahb0 80controller ahc0 81controller isp0 82 83# This controller offers a number of configuration options, too many to 84# document here - see the LINT file in this directory and look up the 85# dpt0 entry there for much fuller documentation on this. 86controller dpt0 87 88controller adv0 at isa? port ? cam irq ? 89controller adw0 90controller bt0 at isa? port ? cam irq ? 91controller aha0 at isa? port ? cam irq ? 92 93controller scbus0 94 95device da0 96 97device sa0 98 99device pass0 100 101device cd0 #Only need one of these, the code dynamically grows 102 103device wt0 at isa? port 0x300 bio irq 5 drq 1 104device mcd0 at isa? port 0x300 bio irq 10 105 106controller matcd0 at isa? port 0x230 bio 107 108device scd0 at isa? port 0x230 bio 109 110# atkbdc0 controlls both the keyboard and the PS/2 mouse 111controller atkbdc0 at isa? port IO_KBD tty 112device atkbd0 at isa? tty irq 1 113device psm0 at isa? tty irq 12 114 115device vga0 at isa? port ? conflicts 116 117# splash screen/screen saver 118pseudo-device splash 119 120# syscons is the default console driver, resembling an SCO console 121device sc0 at isa? tty 122# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver 123#device vt0 at isa? tty 124#options XSERVER # support for X server 125#options FAT_CURSOR # start with block cursor 126# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines 127#options PCVT_SCANSET=2 # IBM keyboards are non-std 128 129device npx0 at isa? port IO_NPX irq 13 130 131# 132# Laptop support (see LINT for more options) 133# 134device apm0 at isa? disable flags 0x31 # Advanced Power Management 135 136# PCCARD (PCMCIA) support 137#controller card0 138#device pcic0 at card? 139#device pcic1 at card? 140 141device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 142device sio1 at isa? port "IO_COM2" tty irq 3 143device sio2 at isa? disable port "IO_COM3" tty irq 5 144device sio3 at isa? disable port "IO_COM4" tty irq 9 145 146# Parallel port 147device ppc0 at isa? port? tty irq 7 148controller ppbus0 149device lpt0 at ppbus? 150device plip0 at ppbus? 151device ppi0 at ppbus? 152#controller vpo0 at ppbus? 153 154# 155# The following Ethernet NICs are all PCI devices. 156# 157device ax0 # ASIX AX88140A 158device de0 # DEC/Intel DC21x4x (``Tulip'') 159device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) 160device mx0 # Macronix 98713/98715/98725 (``PMAC'') 161device pn0 # Lite-On 82c168/82c169 (``PNIC'') 162device rl0 # RealTek 8129/8139 163device tl0 # Texas Instruments ThunderLAN 164device tx0 # SMC 9432TX (83c170 ``EPIC'') 165device vr0 # VIA Rhine, Rhine II 166device vx0 # 3Com 3c590, 3c595 (``Vortex'') 167device wb0 # Winbond W89C840F 168device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') 169 170# Order is important here due to intrusive probes, do *not* alphabetize 171# this list of network interfaces until the probes have been fixed. 172# Right now it appears that the ie0 must be probed before ep0. See 173# revision 1.20 of this file. 174device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 175device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 176device ep0 at isa? port 0x300 net irq 10 177device ex0 at isa? port? net irq? 178device fe0 at isa? port 0x300 net irq ? 179device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 180device lnc0 at isa? port 0x280 net irq 10 drq 0 181device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 182device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 183device cs0 at isa? port 0x300 net irq ? 184 185pseudo-device loop 186pseudo-device ether 187pseudo-device sl 1 188pseudo-device ppp 1 189pseudo-device tun 1 190pseudo-device pty 16 191pseudo-device gzip # Exec gzipped a.out's 192 193# KTRACE enables the system-call tracing facility ktrace(2). 194# This adds 4 KB bloat to your kernel, and slightly increases 195# the costs of each syscall. 196options KTRACE #kernel tracing 197 198# This provides support for System V shared memory and message queues. 199# 200options SYSVSHM 201options SYSVMSG 202 203 204# The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be 205# aware of the legal and administrative consequences of enabling this 206# option. The number of devices determines the maximum number of 207# simultaneous BPF clients programs runnable. 208#pseudo-device bpfilter 4 #Berkeley packet filter 209 210 211# USB support 212#controller uhci0 213#controller ohci0 214#controller usb0 215# 216# for the moment we have to specify the priorities of the device 217# drivers explicitly by the ordering in the list below. This will 218# be changed in the future. 219# 220#device ums0 221#device ukbd0 222#device ulpt0 223#device ucom0 224#device umodem0 225#device uhid0 226#device ugen0 227