machdep.c revision 208621
1/*- 2 * Copyright (c) 2003 Peter Wemm. 3 * Copyright (c) 1992 Terrence R. Lambert. 4 * Copyright (c) 1982, 1987, 1990 The Regents of the University of California. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to Berkeley by 8 * William Jolitz. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. All advertising materials mentioning features or use of this software 19 * must display the following acknowledgement: 20 * This product includes software developed by the University of 21 * California, Berkeley and its contributors. 22 * 4. Neither the name of the University nor the names of its contributors 23 * may be used to endorse or promote products derived from this software 24 * without specific prior written permission. 25 * 26 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 27 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 28 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 29 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 30 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 31 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 32 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 33 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 34 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 35 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 36 * SUCH DAMAGE. 37 * 38 * from: @(#)machdep.c 7.4 (Berkeley) 6/3/91 39 */ 40 41#include <sys/cdefs.h> 42__FBSDID("$FreeBSD: head/sys/amd64/amd64/machdep.c 208621 2010-05-28 17:50:24Z jhb $"); 43 44#include "opt_atalk.h" 45#include "opt_atpic.h" 46#include "opt_compat.h" 47#include "opt_cpu.h" 48#include "opt_ddb.h" 49#include "opt_inet.h" 50#include "opt_ipx.h" 51#include "opt_isa.h" 52#include "opt_kstack_pages.h" 53#include "opt_maxmem.h" 54#include "opt_msgbuf.h" 55#include "opt_perfmon.h" 56#include "opt_sched.h" 57 58#include <sys/param.h> 59#include <sys/proc.h> 60#include <sys/systm.h> 61#include <sys/bio.h> 62#include <sys/buf.h> 63#include <sys/bus.h> 64#include <sys/callout.h> 65#include <sys/cons.h> 66#include <sys/cpu.h> 67#include <sys/eventhandler.h> 68#include <sys/exec.h> 69#include <sys/imgact.h> 70#include <sys/kdb.h> 71#include <sys/kernel.h> 72#include <sys/ktr.h> 73#include <sys/linker.h> 74#include <sys/lock.h> 75#include <sys/malloc.h> 76#include <sys/memrange.h> 77#include <sys/msgbuf.h> 78#include <sys/mutex.h> 79#include <sys/pcpu.h> 80#include <sys/ptrace.h> 81#include <sys/reboot.h> 82#include <sys/sched.h> 83#include <sys/signalvar.h> 84#include <sys/sysctl.h> 85#include <sys/sysent.h> 86#include <sys/sysproto.h> 87#include <sys/ucontext.h> 88#include <sys/vmmeter.h> 89 90#include <vm/vm.h> 91#include <vm/vm_extern.h> 92#include <vm/vm_kern.h> 93#include <vm/vm_page.h> 94#include <vm/vm_map.h> 95#include <vm/vm_object.h> 96#include <vm/vm_pager.h> 97#include <vm/vm_param.h> 98 99#ifdef DDB 100#ifndef KDB 101#error KDB must be enabled in order for DDB to work! 102#endif 103#include <ddb/ddb.h> 104#include <ddb/db_sym.h> 105#endif 106 107#include <net/netisr.h> 108 109#include <machine/clock.h> 110#include <machine/cpu.h> 111#include <machine/cputypes.h> 112#include <machine/intr_machdep.h> 113#include <machine/mca.h> 114#include <machine/md_var.h> 115#include <machine/metadata.h> 116#include <machine/pc/bios.h> 117#include <machine/pcb.h> 118#include <machine/proc.h> 119#include <machine/reg.h> 120#include <machine/sigframe.h> 121#include <machine/specialreg.h> 122#ifdef PERFMON 123#include <machine/perfmon.h> 124#endif 125#include <machine/tss.h> 126#ifdef SMP 127#include <machine/smp.h> 128#endif 129 130#ifdef DEV_ATPIC 131#include <x86/isa/icu.h> 132#else 133#include <machine/apicvar.h> 134#endif 135 136#include <isa/isareg.h> 137#include <isa/rtc.h> 138 139/* Sanity check for __curthread() */ 140CTASSERT(offsetof(struct pcpu, pc_curthread) == 0); 141 142extern u_int64_t hammer_time(u_int64_t, u_int64_t); 143 144extern void printcpuinfo(void); /* XXX header file */ 145extern void identify_cpu(void); 146extern void panicifcpuunsupported(void); 147 148#define CS_SECURE(cs) (ISPL(cs) == SEL_UPL) 149#define EFL_SECURE(ef, oef) ((((ef) ^ (oef)) & ~PSL_USERCHANGE) == 0) 150 151static void cpu_startup(void *); 152static void get_fpcontext(struct thread *td, mcontext_t *mcp); 153static int set_fpcontext(struct thread *td, const mcontext_t *mcp); 154SYSINIT(cpu, SI_SUB_CPU, SI_ORDER_FIRST, cpu_startup, NULL); 155 156#ifdef DDB 157extern vm_offset_t ksym_start, ksym_end; 158#endif 159 160struct msgbuf *msgbufp; 161 162/* Intel ICH registers */ 163#define ICH_PMBASE 0x400 164#define ICH_SMI_EN ICH_PMBASE + 0x30 165 166int _udatasel, _ucodesel, _ucode32sel, _ufssel, _ugssel; 167 168int cold = 1; 169 170long Maxmem = 0; 171long realmem = 0; 172 173/* 174 * The number of PHYSMAP entries must be one less than the number of 175 * PHYSSEG entries because the PHYSMAP entry that spans the largest 176 * physical address that is accessible by ISA DMA is split into two 177 * PHYSSEG entries. 178 */ 179#define PHYSMAP_SIZE (2 * (VM_PHYSSEG_MAX - 1)) 180 181vm_paddr_t phys_avail[PHYSMAP_SIZE + 2]; 182vm_paddr_t dump_avail[PHYSMAP_SIZE + 2]; 183 184/* must be 2 less so 0 0 can signal end of chunks */ 185#define PHYS_AVAIL_ARRAY_END ((sizeof(phys_avail) / sizeof(phys_avail[0])) - 2) 186#define DUMP_AVAIL_ARRAY_END ((sizeof(dump_avail) / sizeof(dump_avail[0])) - 2) 187 188struct kva_md_info kmi; 189 190static struct trapframe proc0_tf; 191struct region_descriptor r_gdt, r_idt; 192 193struct pcpu __pcpu[MAXCPU]; 194 195struct mtx icu_lock; 196 197struct mem_range_softc mem_range_softc; 198 199struct mtx dt_lock; /* lock for GDT and LDT */ 200 201static void 202cpu_startup(dummy) 203 void *dummy; 204{ 205 uintmax_t memsize; 206 char *sysenv; 207 208 /* 209 * On MacBooks, we need to disallow the legacy USB circuit to 210 * generate an SMI# because this can cause several problems, 211 * namely: incorrect CPU frequency detection and failure to 212 * start the APs. 213 * We do this by disabling a bit in the SMI_EN (SMI Control and 214 * Enable register) of the Intel ICH LPC Interface Bridge. 215 */ 216 sysenv = getenv("smbios.system.product"); 217 if (sysenv != NULL) { 218 if (strncmp(sysenv, "MacBook1,1", 10) == 0 || 219 strncmp(sysenv, "MacBook3,1", 10) == 0 || 220 strncmp(sysenv, "MacBookPro1,1", 13) == 0 || 221 strncmp(sysenv, "MacBookPro1,2", 13) == 0 || 222 strncmp(sysenv, "MacBookPro3,1", 13) == 0 || 223 strncmp(sysenv, "Macmini1,1", 10) == 0) { 224 if (bootverbose) 225 printf("Disabling LEGACY_USB_EN bit on " 226 "Intel ICH.\n"); 227 outl(ICH_SMI_EN, inl(ICH_SMI_EN) & ~0x8); 228 } 229 freeenv(sysenv); 230 } 231 232 /* 233 * Good {morning,afternoon,evening,night}. 234 */ 235 startrtclock(); 236 printcpuinfo(); 237 panicifcpuunsupported(); 238#ifdef PERFMON 239 perfmon_init(); 240#endif 241 realmem = Maxmem; 242 243 /* 244 * Display physical memory if SMBIOS reports reasonable amount. 245 */ 246 memsize = 0; 247 sysenv = getenv("smbios.memory.enabled"); 248 if (sysenv != NULL) { 249 memsize = (uintmax_t)strtoul(sysenv, (char **)NULL, 10) << 10; 250 freeenv(sysenv); 251 } 252 if (memsize < ptoa((uintmax_t)cnt.v_free_count)) 253 memsize = ptoa((uintmax_t)Maxmem); 254 printf("real memory = %ju (%ju MB)\n", memsize, memsize >> 20); 255 256 /* 257 * Display any holes after the first chunk of extended memory. 258 */ 259 if (bootverbose) { 260 int indx; 261 262 printf("Physical memory chunk(s):\n"); 263 for (indx = 0; phys_avail[indx + 1] != 0; indx += 2) { 264 vm_paddr_t size; 265 266 size = phys_avail[indx + 1] - phys_avail[indx]; 267 printf( 268 "0x%016jx - 0x%016jx, %ju bytes (%ju pages)\n", 269 (uintmax_t)phys_avail[indx], 270 (uintmax_t)phys_avail[indx + 1] - 1, 271 (uintmax_t)size, (uintmax_t)size / PAGE_SIZE); 272 } 273 } 274 275 vm_ksubmap_init(&kmi); 276 277 printf("avail memory = %ju (%ju MB)\n", 278 ptoa((uintmax_t)cnt.v_free_count), 279 ptoa((uintmax_t)cnt.v_free_count) / 1048576); 280 281 /* 282 * Set up buffers, so they can be used to read disk labels. 283 */ 284 bufinit(); 285 vm_pager_bufferinit(); 286 287 cpu_setregs(); 288} 289 290/* 291 * Send an interrupt to process. 292 * 293 * Stack is set up to allow sigcode stored 294 * at top to call routine, followed by call 295 * to sigreturn routine below. After sigreturn 296 * resets the signal mask, the stack, and the 297 * frame pointer, it returns to the user 298 * specified pc, psl. 299 */ 300void 301sendsig(sig_t catcher, ksiginfo_t *ksi, sigset_t *mask) 302{ 303 struct sigframe sf, *sfp; 304 struct proc *p; 305 struct thread *td; 306 struct sigacts *psp; 307 char *sp; 308 struct trapframe *regs; 309 int sig; 310 int oonstack; 311 312 td = curthread; 313 p = td->td_proc; 314 PROC_LOCK_ASSERT(p, MA_OWNED); 315 sig = ksi->ksi_signo; 316 psp = p->p_sigacts; 317 mtx_assert(&psp->ps_mtx, MA_OWNED); 318 regs = td->td_frame; 319 oonstack = sigonstack(regs->tf_rsp); 320 321 /* Save user context. */ 322 bzero(&sf, sizeof(sf)); 323 sf.sf_uc.uc_sigmask = *mask; 324 sf.sf_uc.uc_stack = td->td_sigstk; 325 sf.sf_uc.uc_stack.ss_flags = (td->td_pflags & TDP_ALTSTACK) 326 ? ((oonstack) ? SS_ONSTACK : 0) : SS_DISABLE; 327 sf.sf_uc.uc_mcontext.mc_onstack = (oonstack) ? 1 : 0; 328 bcopy(regs, &sf.sf_uc.uc_mcontext.mc_rdi, sizeof(*regs)); 329 sf.sf_uc.uc_mcontext.mc_len = sizeof(sf.sf_uc.uc_mcontext); /* magic */ 330 get_fpcontext(td, &sf.sf_uc.uc_mcontext); 331 fpstate_drop(td); 332 sf.sf_uc.uc_mcontext.mc_fsbase = td->td_pcb->pcb_fsbase; 333 sf.sf_uc.uc_mcontext.mc_gsbase = td->td_pcb->pcb_gsbase; 334 335 /* Allocate space for the signal handler context. */ 336 if ((td->td_pflags & TDP_ALTSTACK) != 0 && !oonstack && 337 SIGISMEMBER(psp->ps_sigonstack, sig)) { 338 sp = td->td_sigstk.ss_sp + 339 td->td_sigstk.ss_size - sizeof(struct sigframe); 340#if defined(COMPAT_43) 341 td->td_sigstk.ss_flags |= SS_ONSTACK; 342#endif 343 } else 344 sp = (char *)regs->tf_rsp - sizeof(struct sigframe) - 128; 345 /* Align to 16 bytes. */ 346 sfp = (struct sigframe *)((unsigned long)sp & ~0xFul); 347 348 /* Translate the signal if appropriate. */ 349 if (p->p_sysent->sv_sigtbl && sig <= p->p_sysent->sv_sigsize) 350 sig = p->p_sysent->sv_sigtbl[_SIG_IDX(sig)]; 351 352 /* Build the argument list for the signal handler. */ 353 regs->tf_rdi = sig; /* arg 1 in %rdi */ 354 regs->tf_rdx = (register_t)&sfp->sf_uc; /* arg 3 in %rdx */ 355 if (SIGISMEMBER(psp->ps_siginfo, sig)) { 356 /* Signal handler installed with SA_SIGINFO. */ 357 regs->tf_rsi = (register_t)&sfp->sf_si; /* arg 2 in %rsi */ 358 sf.sf_ahu.sf_action = (__siginfohandler_t *)catcher; 359 360 /* Fill in POSIX parts */ 361 sf.sf_si = ksi->ksi_info; 362 sf.sf_si.si_signo = sig; /* maybe a translated signal */ 363 regs->tf_rcx = (register_t)ksi->ksi_addr; /* arg 4 in %rcx */ 364 } else { 365 /* Old FreeBSD-style arguments. */ 366 regs->tf_rsi = ksi->ksi_code; /* arg 2 in %rsi */ 367 regs->tf_rcx = (register_t)ksi->ksi_addr; /* arg 4 in %rcx */ 368 sf.sf_ahu.sf_handler = catcher; 369 } 370 mtx_unlock(&psp->ps_mtx); 371 PROC_UNLOCK(p); 372 373 /* 374 * Copy the sigframe out to the user's stack. 375 */ 376 if (copyout(&sf, sfp, sizeof(*sfp)) != 0) { 377#ifdef DEBUG 378 printf("process %ld has trashed its stack\n", (long)p->p_pid); 379#endif 380 PROC_LOCK(p); 381 sigexit(td, SIGILL); 382 } 383 384 regs->tf_rsp = (long)sfp; 385 regs->tf_rip = PS_STRINGS - *(p->p_sysent->sv_szsigcode); 386 regs->tf_rflags &= ~(PSL_T | PSL_D); 387 regs->tf_cs = _ucodesel; 388 regs->tf_ds = _udatasel; 389 regs->tf_es = _udatasel; 390 regs->tf_fs = _ufssel; 391 regs->tf_gs = _ugssel; 392 regs->tf_flags = TF_HASSEGS; 393 td->td_pcb->pcb_full_iret = 1; 394 PROC_LOCK(p); 395 mtx_lock(&psp->ps_mtx); 396} 397 398/* 399 * System call to cleanup state after a signal 400 * has been taken. Reset signal mask and 401 * stack state from context left by sendsig (above). 402 * Return to previous pc and psl as specified by 403 * context left by sendsig. Check carefully to 404 * make sure that the user has not modified the 405 * state to gain improper privileges. 406 * 407 * MPSAFE 408 */ 409int 410sigreturn(td, uap) 411 struct thread *td; 412 struct sigreturn_args /* { 413 const struct __ucontext *sigcntxp; 414 } */ *uap; 415{ 416 ucontext_t uc; 417 struct proc *p = td->td_proc; 418 struct trapframe *regs; 419 ucontext_t *ucp; 420 long rflags; 421 int cs, error, ret; 422 ksiginfo_t ksi; 423 424 error = copyin(uap->sigcntxp, &uc, sizeof(uc)); 425 if (error != 0) { 426 uprintf("pid %d (%s): sigreturn copyin failed\n", 427 p->p_pid, td->td_name); 428 return (error); 429 } 430 ucp = &uc; 431 if ((ucp->uc_mcontext.mc_flags & ~_MC_FLAG_MASK) != 0) { 432 uprintf("pid %d (%s): sigreturn mc_flags %x\n", p->p_pid, 433 td->td_name, ucp->uc_mcontext.mc_flags); 434 return (EINVAL); 435 } 436 regs = td->td_frame; 437 rflags = ucp->uc_mcontext.mc_rflags; 438 /* 439 * Don't allow users to change privileged or reserved flags. 440 */ 441 /* 442 * XXX do allow users to change the privileged flag PSL_RF. 443 * The cpu sets PSL_RF in tf_rflags for faults. Debuggers 444 * should sometimes set it there too. tf_rflags is kept in 445 * the signal context during signal handling and there is no 446 * other place to remember it, so the PSL_RF bit may be 447 * corrupted by the signal handler without us knowing. 448 * Corruption of the PSL_RF bit at worst causes one more or 449 * one less debugger trap, so allowing it is fairly harmless. 450 */ 451 if (!EFL_SECURE(rflags & ~PSL_RF, regs->tf_rflags & ~PSL_RF)) { 452 uprintf("pid %d (%s): sigreturn rflags = 0x%lx\n", p->p_pid, 453 td->td_name, rflags); 454 return (EINVAL); 455 } 456 457 /* 458 * Don't allow users to load a valid privileged %cs. Let the 459 * hardware check for invalid selectors, excess privilege in 460 * other selectors, invalid %eip's and invalid %esp's. 461 */ 462 cs = ucp->uc_mcontext.mc_cs; 463 if (!CS_SECURE(cs)) { 464 uprintf("pid %d (%s): sigreturn cs = 0x%x\n", p->p_pid, 465 td->td_name, cs); 466 ksiginfo_init_trap(&ksi); 467 ksi.ksi_signo = SIGBUS; 468 ksi.ksi_code = BUS_OBJERR; 469 ksi.ksi_trapno = T_PROTFLT; 470 ksi.ksi_addr = (void *)regs->tf_rip; 471 trapsignal(td, &ksi); 472 return (EINVAL); 473 } 474 475 ret = set_fpcontext(td, &ucp->uc_mcontext); 476 if (ret != 0) { 477 uprintf("pid %d (%s): sigreturn set_fpcontext err %d\n", 478 p->p_pid, td->td_name, ret); 479 return (ret); 480 } 481 bcopy(&ucp->uc_mcontext.mc_rdi, regs, sizeof(*regs)); 482 td->td_pcb->pcb_fsbase = ucp->uc_mcontext.mc_fsbase; 483 td->td_pcb->pcb_gsbase = ucp->uc_mcontext.mc_gsbase; 484 485#if defined(COMPAT_43) 486 if (ucp->uc_mcontext.mc_onstack & 1) 487 td->td_sigstk.ss_flags |= SS_ONSTACK; 488 else 489 td->td_sigstk.ss_flags &= ~SS_ONSTACK; 490#endif 491 492 kern_sigprocmask(td, SIG_SETMASK, &ucp->uc_sigmask, NULL, 0); 493 td->td_pcb->pcb_flags |= PCB_FULLCTX; 494 td->td_pcb->pcb_full_iret = 1; 495 return (EJUSTRETURN); 496} 497 498#ifdef COMPAT_FREEBSD4 499int 500freebsd4_sigreturn(struct thread *td, struct freebsd4_sigreturn_args *uap) 501{ 502 503 return sigreturn(td, (struct sigreturn_args *)uap); 504} 505#endif 506 507 508/* 509 * Machine dependent boot() routine 510 * 511 * I haven't seen anything to put here yet 512 * Possibly some stuff might be grafted back here from boot() 513 */ 514void 515cpu_boot(int howto) 516{ 517} 518 519/* 520 * Flush the D-cache for non-DMA I/O so that the I-cache can 521 * be made coherent later. 522 */ 523void 524cpu_flush_dcache(void *ptr, size_t len) 525{ 526 /* Not applicable */ 527} 528 529/* Get current clock frequency for the given cpu id. */ 530int 531cpu_est_clockrate(int cpu_id, uint64_t *rate) 532{ 533 register_t reg; 534 uint64_t tsc1, tsc2; 535 536 if (pcpu_find(cpu_id) == NULL || rate == NULL) 537 return (EINVAL); 538 539 /* If we're booting, trust the rate calibrated moments ago. */ 540 if (cold) { 541 *rate = tsc_freq; 542 return (0); 543 } 544 545#ifdef SMP 546 /* Schedule ourselves on the indicated cpu. */ 547 thread_lock(curthread); 548 sched_bind(curthread, cpu_id); 549 thread_unlock(curthread); 550#endif 551 552 /* Calibrate by measuring a short delay. */ 553 reg = intr_disable(); 554 tsc1 = rdtsc(); 555 DELAY(1000); 556 tsc2 = rdtsc(); 557 intr_restore(reg); 558 559#ifdef SMP 560 thread_lock(curthread); 561 sched_unbind(curthread); 562 thread_unlock(curthread); 563#endif 564 565 /* 566 * Calculate the difference in readings, convert to Mhz, and 567 * subtract 0.5% of the total. Empirical testing has shown that 568 * overhead in DELAY() works out to approximately this value. 569 */ 570 tsc2 -= tsc1; 571 *rate = tsc2 * 1000 - tsc2 * 5; 572 return (0); 573} 574 575/* 576 * Shutdown the CPU as much as possible 577 */ 578void 579cpu_halt(void) 580{ 581 for (;;) 582 __asm__ ("hlt"); 583} 584 585void (*cpu_idle_hook)(void) = NULL; /* ACPI idle hook. */ 586 587static void 588cpu_idle_hlt(int busy) 589{ 590 /* 591 * we must absolutely guarentee that hlt is the next instruction 592 * after sti or we introduce a timing window. 593 */ 594 disable_intr(); 595 if (sched_runnable()) 596 enable_intr(); 597 else 598 __asm __volatile("sti; hlt"); 599} 600 601static void 602cpu_idle_acpi(int busy) 603{ 604 disable_intr(); 605 if (sched_runnable()) 606 enable_intr(); 607 else if (cpu_idle_hook) 608 cpu_idle_hook(); 609 else 610 __asm __volatile("sti; hlt"); 611} 612 613static int cpu_ident_amdc1e = 0; 614 615static int 616cpu_probe_amdc1e(void) 617{ 618 int i; 619 620 /* 621 * Forget it, if we're not using local APIC timer. 622 */ 623 if (resource_disabled("apic", 0) || 624 (resource_int_value("apic", 0, "clock", &i) == 0 && i == 0)) 625 return (0); 626 627 /* 628 * Detect the presence of C1E capability mostly on latest 629 * dual-cores (or future) k8 family. 630 */ 631 if (cpu_vendor_id == CPU_VENDOR_AMD && 632 (cpu_id & 0x00000f00) == 0x00000f00 && 633 (cpu_id & 0x0fff0000) >= 0x00040000) { 634 cpu_ident_amdc1e = 1; 635 return (1); 636 } 637 638 return (0); 639} 640 641/* 642 * C1E renders the local APIC timer dead, so we disable it by 643 * reading the Interrupt Pending Message register and clearing 644 * both C1eOnCmpHalt (bit 28) and SmiOnCmpHalt (bit 27). 645 * 646 * Reference: 647 * "BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh Processors" 648 * #32559 revision 3.00+ 649 */ 650#define MSR_AMDK8_IPM 0xc0010055 651#define AMDK8_SMIONCMPHALT (1ULL << 27) 652#define AMDK8_C1EONCMPHALT (1ULL << 28) 653#define AMDK8_CMPHALT (AMDK8_SMIONCMPHALT | AMDK8_C1EONCMPHALT) 654 655static void 656cpu_idle_amdc1e(int busy) 657{ 658 659 disable_intr(); 660 if (sched_runnable()) 661 enable_intr(); 662 else { 663 uint64_t msr; 664 665 msr = rdmsr(MSR_AMDK8_IPM); 666 if (msr & AMDK8_CMPHALT) 667 wrmsr(MSR_AMDK8_IPM, msr & ~AMDK8_CMPHALT); 668 669 if (cpu_idle_hook) 670 cpu_idle_hook(); 671 else 672 __asm __volatile("sti; hlt"); 673 } 674} 675 676static void 677cpu_idle_spin(int busy) 678{ 679 return; 680} 681 682void (*cpu_idle_fn)(int) = cpu_idle_acpi; 683 684void 685cpu_idle(int busy) 686{ 687#ifdef SMP 688 if (mp_grab_cpu_hlt()) 689 return; 690#endif 691 cpu_idle_fn(busy); 692} 693 694/* 695 * mwait cpu power states. Lower 4 bits are sub-states. 696 */ 697#define MWAIT_C0 0xf0 698#define MWAIT_C1 0x00 699#define MWAIT_C2 0x10 700#define MWAIT_C3 0x20 701#define MWAIT_C4 0x30 702 703#define MWAIT_DISABLED 0x0 704#define MWAIT_WOKEN 0x1 705#define MWAIT_WAITING 0x2 706 707static void 708cpu_idle_mwait(int busy) 709{ 710 int *mwait; 711 712 mwait = (int *)PCPU_PTR(monitorbuf); 713 *mwait = MWAIT_WAITING; 714 if (sched_runnable()) 715 return; 716 cpu_monitor(mwait, 0, 0); 717 if (*mwait == MWAIT_WAITING) 718 cpu_mwait(0, MWAIT_C1); 719} 720 721static void 722cpu_idle_mwait_hlt(int busy) 723{ 724 int *mwait; 725 726 mwait = (int *)PCPU_PTR(monitorbuf); 727 if (busy == 0) { 728 *mwait = MWAIT_DISABLED; 729 cpu_idle_hlt(busy); 730 return; 731 } 732 *mwait = MWAIT_WAITING; 733 if (sched_runnable()) 734 return; 735 cpu_monitor(mwait, 0, 0); 736 if (*mwait == MWAIT_WAITING) 737 cpu_mwait(0, MWAIT_C1); 738} 739 740int 741cpu_idle_wakeup(int cpu) 742{ 743 struct pcpu *pcpu; 744 int *mwait; 745 746 if (cpu_idle_fn == cpu_idle_spin) 747 return (1); 748 if (cpu_idle_fn != cpu_idle_mwait && cpu_idle_fn != cpu_idle_mwait_hlt) 749 return (0); 750 pcpu = pcpu_find(cpu); 751 mwait = (int *)pcpu->pc_monitorbuf; 752 /* 753 * This doesn't need to be atomic since missing the race will 754 * simply result in unnecessary IPIs. 755 */ 756 if (cpu_idle_fn == cpu_idle_mwait_hlt && *mwait == MWAIT_DISABLED) 757 return (0); 758 *mwait = MWAIT_WOKEN; 759 760 return (1); 761} 762 763/* 764 * Ordered by speed/power consumption. 765 */ 766struct { 767 void *id_fn; 768 char *id_name; 769} idle_tbl[] = { 770 { cpu_idle_spin, "spin" }, 771 { cpu_idle_mwait, "mwait" }, 772 { cpu_idle_mwait_hlt, "mwait_hlt" }, 773 { cpu_idle_amdc1e, "amdc1e" }, 774 { cpu_idle_hlt, "hlt" }, 775 { cpu_idle_acpi, "acpi" }, 776 { NULL, NULL } 777}; 778 779static int 780idle_sysctl_available(SYSCTL_HANDLER_ARGS) 781{ 782 char *avail, *p; 783 int error; 784 int i; 785 786 avail = malloc(256, M_TEMP, M_WAITOK); 787 p = avail; 788 for (i = 0; idle_tbl[i].id_name != NULL; i++) { 789 if (strstr(idle_tbl[i].id_name, "mwait") && 790 (cpu_feature2 & CPUID2_MON) == 0) 791 continue; 792 if (strcmp(idle_tbl[i].id_name, "amdc1e") == 0 && 793 cpu_ident_amdc1e == 0) 794 continue; 795 p += sprintf(p, "%s, ", idle_tbl[i].id_name); 796 } 797 error = sysctl_handle_string(oidp, avail, 0, req); 798 free(avail, M_TEMP); 799 return (error); 800} 801 802static int 803idle_sysctl(SYSCTL_HANDLER_ARGS) 804{ 805 char buf[16]; 806 int error; 807 char *p; 808 int i; 809 810 p = "unknown"; 811 for (i = 0; idle_tbl[i].id_name != NULL; i++) { 812 if (idle_tbl[i].id_fn == cpu_idle_fn) { 813 p = idle_tbl[i].id_name; 814 break; 815 } 816 } 817 strncpy(buf, p, sizeof(buf)); 818 error = sysctl_handle_string(oidp, buf, sizeof(buf), req); 819 if (error != 0 || req->newptr == NULL) 820 return (error); 821 for (i = 0; idle_tbl[i].id_name != NULL; i++) { 822 if (strstr(idle_tbl[i].id_name, "mwait") && 823 (cpu_feature2 & CPUID2_MON) == 0) 824 continue; 825 if (strcmp(idle_tbl[i].id_name, "amdc1e") == 0 && 826 cpu_ident_amdc1e == 0) 827 continue; 828 if (strcmp(idle_tbl[i].id_name, buf)) 829 continue; 830 cpu_idle_fn = idle_tbl[i].id_fn; 831 return (0); 832 } 833 return (EINVAL); 834} 835 836SYSCTL_PROC(_machdep, OID_AUTO, idle_available, CTLTYPE_STRING | CTLFLAG_RD, 837 0, 0, idle_sysctl_available, "A", "list of available idle functions"); 838 839SYSCTL_PROC(_machdep, OID_AUTO, idle, CTLTYPE_STRING | CTLFLAG_RW, 0, 0, 840 idle_sysctl, "A", "currently selected idle function"); 841 842/* 843 * Reset registers to default values on exec. 844 */ 845void 846exec_setregs(struct thread *td, struct image_params *imgp, u_long stack) 847{ 848 struct trapframe *regs = td->td_frame; 849 struct pcb *pcb = td->td_pcb; 850 851 mtx_lock(&dt_lock); 852 if (td->td_proc->p_md.md_ldt != NULL) 853 user_ldt_free(td); 854 else 855 mtx_unlock(&dt_lock); 856 857 pcb->pcb_fsbase = 0; 858 pcb->pcb_gsbase = 0; 859 pcb->pcb_flags &= ~(PCB_32BIT | PCB_GS32BIT); 860 pcb->pcb_initial_fpucw = __INITIAL_FPUCW__; 861 pcb->pcb_full_iret = 1; 862 863 bzero((char *)regs, sizeof(struct trapframe)); 864 regs->tf_rip = imgp->entry_addr; 865 regs->tf_rsp = ((stack - 8) & ~0xFul) + 8; 866 regs->tf_rdi = stack; /* argv */ 867 regs->tf_rflags = PSL_USER | (regs->tf_rflags & PSL_T); 868 regs->tf_ss = _udatasel; 869 regs->tf_cs = _ucodesel; 870 regs->tf_ds = _udatasel; 871 regs->tf_es = _udatasel; 872 regs->tf_fs = _ufssel; 873 regs->tf_gs = _ugssel; 874 regs->tf_flags = TF_HASSEGS; 875 876 /* 877 * Reset the hardware debug registers if they were in use. 878 * They won't have any meaning for the newly exec'd process. 879 */ 880 if (pcb->pcb_flags & PCB_DBREGS) { 881 pcb->pcb_dr0 = 0; 882 pcb->pcb_dr1 = 0; 883 pcb->pcb_dr2 = 0; 884 pcb->pcb_dr3 = 0; 885 pcb->pcb_dr6 = 0; 886 pcb->pcb_dr7 = 0; 887 if (pcb == PCPU_GET(curpcb)) { 888 /* 889 * Clear the debug registers on the running 890 * CPU, otherwise they will end up affecting 891 * the next process we switch to. 892 */ 893 reset_dbregs(); 894 } 895 pcb->pcb_flags &= ~PCB_DBREGS; 896 } 897 898 /* 899 * Drop the FP state if we hold it, so that the process gets a 900 * clean FP state if it uses the FPU again. 901 */ 902 fpstate_drop(td); 903} 904 905void 906cpu_setregs(void) 907{ 908 register_t cr0; 909 910 cr0 = rcr0(); 911 /* 912 * CR0_MP, CR0_NE and CR0_TS are also set by npx_probe() for the 913 * BSP. See the comments there about why we set them. 914 */ 915 cr0 |= CR0_MP | CR0_NE | CR0_TS | CR0_WP | CR0_AM; 916 load_cr0(cr0); 917} 918 919/* 920 * Initialize amd64 and configure to run kernel 921 */ 922 923/* 924 * Initialize segments & interrupt table 925 */ 926 927struct user_segment_descriptor gdt[NGDT * MAXCPU];/* global descriptor tables */ 928static struct gate_descriptor idt0[NIDT]; 929struct gate_descriptor *idt = &idt0[0]; /* interrupt descriptor table */ 930 931static char dblfault_stack[PAGE_SIZE] __aligned(16); 932 933static char nmi0_stack[PAGE_SIZE] __aligned(16); 934CTASSERT(sizeof(struct nmi_pcpu) == 16); 935 936struct amd64tss common_tss[MAXCPU]; 937 938/* 939 * Software prototypes -- in more palatable form. 940 * 941 * Keep GUFS32, GUGS32, GUCODE32 and GUDATA at the same 942 * slots as corresponding segments for i386 kernel. 943 */ 944struct soft_segment_descriptor gdt_segs[] = { 945/* GNULL_SEL 0 Null Descriptor */ 946{ .ssd_base = 0x0, 947 .ssd_limit = 0x0, 948 .ssd_type = 0, 949 .ssd_dpl = 0, 950 .ssd_p = 0, 951 .ssd_long = 0, 952 .ssd_def32 = 0, 953 .ssd_gran = 0 }, 954/* GNULL2_SEL 1 Null Descriptor */ 955{ .ssd_base = 0x0, 956 .ssd_limit = 0x0, 957 .ssd_type = 0, 958 .ssd_dpl = 0, 959 .ssd_p = 0, 960 .ssd_long = 0, 961 .ssd_def32 = 0, 962 .ssd_gran = 0 }, 963/* GUFS32_SEL 2 32 bit %gs Descriptor for user */ 964{ .ssd_base = 0x0, 965 .ssd_limit = 0xfffff, 966 .ssd_type = SDT_MEMRWA, 967 .ssd_dpl = SEL_UPL, 968 .ssd_p = 1, 969 .ssd_long = 0, 970 .ssd_def32 = 1, 971 .ssd_gran = 1 }, 972/* GUGS32_SEL 3 32 bit %fs Descriptor for user */ 973{ .ssd_base = 0x0, 974 .ssd_limit = 0xfffff, 975 .ssd_type = SDT_MEMRWA, 976 .ssd_dpl = SEL_UPL, 977 .ssd_p = 1, 978 .ssd_long = 0, 979 .ssd_def32 = 1, 980 .ssd_gran = 1 }, 981/* GCODE_SEL 4 Code Descriptor for kernel */ 982{ .ssd_base = 0x0, 983 .ssd_limit = 0xfffff, 984 .ssd_type = SDT_MEMERA, 985 .ssd_dpl = SEL_KPL, 986 .ssd_p = 1, 987 .ssd_long = 1, 988 .ssd_def32 = 0, 989 .ssd_gran = 1 }, 990/* GDATA_SEL 5 Data Descriptor for kernel */ 991{ .ssd_base = 0x0, 992 .ssd_limit = 0xfffff, 993 .ssd_type = SDT_MEMRWA, 994 .ssd_dpl = SEL_KPL, 995 .ssd_p = 1, 996 .ssd_long = 1, 997 .ssd_def32 = 0, 998 .ssd_gran = 1 }, 999/* GUCODE32_SEL 6 32 bit Code Descriptor for user */ 1000{ .ssd_base = 0x0, 1001 .ssd_limit = 0xfffff, 1002 .ssd_type = SDT_MEMERA, 1003 .ssd_dpl = SEL_UPL, 1004 .ssd_p = 1, 1005 .ssd_long = 0, 1006 .ssd_def32 = 1, 1007 .ssd_gran = 1 }, 1008/* GUDATA_SEL 7 32/64 bit Data Descriptor for user */ 1009{ .ssd_base = 0x0, 1010 .ssd_limit = 0xfffff, 1011 .ssd_type = SDT_MEMRWA, 1012 .ssd_dpl = SEL_UPL, 1013 .ssd_p = 1, 1014 .ssd_long = 0, 1015 .ssd_def32 = 1, 1016 .ssd_gran = 1 }, 1017/* GUCODE_SEL 8 64 bit Code Descriptor for user */ 1018{ .ssd_base = 0x0, 1019 .ssd_limit = 0xfffff, 1020 .ssd_type = SDT_MEMERA, 1021 .ssd_dpl = SEL_UPL, 1022 .ssd_p = 1, 1023 .ssd_long = 1, 1024 .ssd_def32 = 0, 1025 .ssd_gran = 1 }, 1026/* GPROC0_SEL 9 Proc 0 Tss Descriptor */ 1027{ .ssd_base = 0x0, 1028 .ssd_limit = sizeof(struct amd64tss) + IOPAGES * PAGE_SIZE - 1, 1029 .ssd_type = SDT_SYSTSS, 1030 .ssd_dpl = SEL_KPL, 1031 .ssd_p = 1, 1032 .ssd_long = 0, 1033 .ssd_def32 = 0, 1034 .ssd_gran = 0 }, 1035/* Actually, the TSS is a system descriptor which is double size */ 1036{ .ssd_base = 0x0, 1037 .ssd_limit = 0x0, 1038 .ssd_type = 0, 1039 .ssd_dpl = 0, 1040 .ssd_p = 0, 1041 .ssd_long = 0, 1042 .ssd_def32 = 0, 1043 .ssd_gran = 0 }, 1044/* GUSERLDT_SEL 11 LDT Descriptor */ 1045{ .ssd_base = 0x0, 1046 .ssd_limit = 0x0, 1047 .ssd_type = 0, 1048 .ssd_dpl = 0, 1049 .ssd_p = 0, 1050 .ssd_long = 0, 1051 .ssd_def32 = 0, 1052 .ssd_gran = 0 }, 1053/* GUSERLDT_SEL 12 LDT Descriptor, double size */ 1054{ .ssd_base = 0x0, 1055 .ssd_limit = 0x0, 1056 .ssd_type = 0, 1057 .ssd_dpl = 0, 1058 .ssd_p = 0, 1059 .ssd_long = 0, 1060 .ssd_def32 = 0, 1061 .ssd_gran = 0 }, 1062}; 1063 1064void 1065setidt(idx, func, typ, dpl, ist) 1066 int idx; 1067 inthand_t *func; 1068 int typ; 1069 int dpl; 1070 int ist; 1071{ 1072 struct gate_descriptor *ip; 1073 1074 ip = idt + idx; 1075 ip->gd_looffset = (uintptr_t)func; 1076 ip->gd_selector = GSEL(GCODE_SEL, SEL_KPL); 1077 ip->gd_ist = ist; 1078 ip->gd_xx = 0; 1079 ip->gd_type = typ; 1080 ip->gd_dpl = dpl; 1081 ip->gd_p = 1; 1082 ip->gd_hioffset = ((uintptr_t)func)>>16 ; 1083} 1084 1085extern inthand_t 1086 IDTVEC(div), IDTVEC(dbg), IDTVEC(nmi), IDTVEC(bpt), IDTVEC(ofl), 1087 IDTVEC(bnd), IDTVEC(ill), IDTVEC(dna), IDTVEC(fpusegm), 1088 IDTVEC(tss), IDTVEC(missing), IDTVEC(stk), IDTVEC(prot), 1089 IDTVEC(page), IDTVEC(mchk), IDTVEC(rsvd), IDTVEC(fpu), IDTVEC(align), 1090 IDTVEC(xmm), IDTVEC(dblfault), 1091 IDTVEC(fast_syscall), IDTVEC(fast_syscall32); 1092 1093#ifdef DDB 1094/* 1095 * Display the index and function name of any IDT entries that don't use 1096 * the default 'rsvd' entry point. 1097 */ 1098DB_SHOW_COMMAND(idt, db_show_idt) 1099{ 1100 struct gate_descriptor *ip; 1101 int idx; 1102 uintptr_t func; 1103 1104 ip = idt; 1105 for (idx = 0; idx < NIDT && !db_pager_quit; idx++) { 1106 func = ((long)ip->gd_hioffset << 16 | ip->gd_looffset); 1107 if (func != (uintptr_t)&IDTVEC(rsvd)) { 1108 db_printf("%3d\t", idx); 1109 db_printsym(func, DB_STGY_PROC); 1110 db_printf("\n"); 1111 } 1112 ip++; 1113 } 1114} 1115#endif 1116 1117void 1118sdtossd(sd, ssd) 1119 struct user_segment_descriptor *sd; 1120 struct soft_segment_descriptor *ssd; 1121{ 1122 1123 ssd->ssd_base = (sd->sd_hibase << 24) | sd->sd_lobase; 1124 ssd->ssd_limit = (sd->sd_hilimit << 16) | sd->sd_lolimit; 1125 ssd->ssd_type = sd->sd_type; 1126 ssd->ssd_dpl = sd->sd_dpl; 1127 ssd->ssd_p = sd->sd_p; 1128 ssd->ssd_long = sd->sd_long; 1129 ssd->ssd_def32 = sd->sd_def32; 1130 ssd->ssd_gran = sd->sd_gran; 1131} 1132 1133void 1134ssdtosd(ssd, sd) 1135 struct soft_segment_descriptor *ssd; 1136 struct user_segment_descriptor *sd; 1137{ 1138 1139 sd->sd_lobase = (ssd->ssd_base) & 0xffffff; 1140 sd->sd_hibase = (ssd->ssd_base >> 24) & 0xff; 1141 sd->sd_lolimit = (ssd->ssd_limit) & 0xffff; 1142 sd->sd_hilimit = (ssd->ssd_limit >> 16) & 0xf; 1143 sd->sd_type = ssd->ssd_type; 1144 sd->sd_dpl = ssd->ssd_dpl; 1145 sd->sd_p = ssd->ssd_p; 1146 sd->sd_long = ssd->ssd_long; 1147 sd->sd_def32 = ssd->ssd_def32; 1148 sd->sd_gran = ssd->ssd_gran; 1149} 1150 1151void 1152ssdtosyssd(ssd, sd) 1153 struct soft_segment_descriptor *ssd; 1154 struct system_segment_descriptor *sd; 1155{ 1156 1157 sd->sd_lobase = (ssd->ssd_base) & 0xffffff; 1158 sd->sd_hibase = (ssd->ssd_base >> 24) & 0xfffffffffful; 1159 sd->sd_lolimit = (ssd->ssd_limit) & 0xffff; 1160 sd->sd_hilimit = (ssd->ssd_limit >> 16) & 0xf; 1161 sd->sd_type = ssd->ssd_type; 1162 sd->sd_dpl = ssd->ssd_dpl; 1163 sd->sd_p = ssd->ssd_p; 1164 sd->sd_gran = ssd->ssd_gran; 1165} 1166 1167#if !defined(DEV_ATPIC) && defined(DEV_ISA) 1168#include <isa/isavar.h> 1169#include <isa/isareg.h> 1170/* 1171 * Return a bitmap of the current interrupt requests. This is 8259-specific 1172 * and is only suitable for use at probe time. 1173 * This is only here to pacify sio. It is NOT FATAL if this doesn't work. 1174 * It shouldn't be here. There should probably be an APIC centric 1175 * implementation in the apic driver code, if at all. 1176 */ 1177intrmask_t 1178isa_irq_pending(void) 1179{ 1180 u_char irr1; 1181 u_char irr2; 1182 1183 irr1 = inb(IO_ICU1); 1184 irr2 = inb(IO_ICU2); 1185 return ((irr2 << 8) | irr1); 1186} 1187#endif 1188 1189u_int basemem; 1190 1191static int 1192add_smap_entry(struct bios_smap *smap, vm_paddr_t *physmap, int *physmap_idxp) 1193{ 1194 int i, insert_idx, physmap_idx; 1195 1196 physmap_idx = *physmap_idxp; 1197 1198 if (boothowto & RB_VERBOSE) 1199 printf("SMAP type=%02x base=%016lx len=%016lx\n", 1200 smap->type, smap->base, smap->length); 1201 1202 if (smap->type != SMAP_TYPE_MEMORY) 1203 return (1); 1204 1205 if (smap->length == 0) 1206 return (0); 1207 1208 /* 1209 * Find insertion point while checking for overlap. Start off by 1210 * assuming the new entry will be added to the end. 1211 */ 1212 insert_idx = physmap_idx + 2; 1213 for (i = 0; i <= physmap_idx; i += 2) { 1214 if (smap->base < physmap[i + 1]) { 1215 if (smap->base + smap->length <= physmap[i]) { 1216 insert_idx = i; 1217 break; 1218 } 1219 if (boothowto & RB_VERBOSE) 1220 printf( 1221 "Overlapping memory regions, ignoring second region\n"); 1222 return (1); 1223 } 1224 } 1225 1226 /* See if we can prepend to the next entry. */ 1227 if (insert_idx <= physmap_idx && 1228 smap->base + smap->length == physmap[insert_idx]) { 1229 physmap[insert_idx] = smap->base; 1230 return (1); 1231 } 1232 1233 /* See if we can append to the previous entry. */ 1234 if (insert_idx > 0 && smap->base == physmap[insert_idx - 1]) { 1235 physmap[insert_idx - 1] += smap->length; 1236 return (1); 1237 } 1238 1239 physmap_idx += 2; 1240 *physmap_idxp = physmap_idx; 1241 if (physmap_idx == PHYSMAP_SIZE) { 1242 printf( 1243 "Too many segments in the physical address map, giving up\n"); 1244 return (0); 1245 } 1246 1247 /* 1248 * Move the last 'N' entries down to make room for the new 1249 * entry if needed. 1250 */ 1251 for (i = physmap_idx; i > insert_idx; i -= 2) { 1252 physmap[i] = physmap[i - 2]; 1253 physmap[i + 1] = physmap[i - 1]; 1254 } 1255 1256 /* Insert the new entry. */ 1257 physmap[insert_idx] = smap->base; 1258 physmap[insert_idx + 1] = smap->base + smap->length; 1259 return (1); 1260} 1261 1262/* 1263 * Populate the (physmap) array with base/bound pairs describing the 1264 * available physical memory in the system, then test this memory and 1265 * build the phys_avail array describing the actually-available memory. 1266 * 1267 * If we cannot accurately determine the physical memory map, then use 1268 * value from the 0xE801 call, and failing that, the RTC. 1269 * 1270 * Total memory size may be set by the kernel environment variable 1271 * hw.physmem or the compile-time define MAXMEM. 1272 * 1273 * XXX first should be vm_paddr_t. 1274 */ 1275static void 1276getmemsize(caddr_t kmdp, u_int64_t first) 1277{ 1278 int i, physmap_idx, pa_indx, da_indx; 1279 vm_paddr_t pa, physmap[PHYSMAP_SIZE]; 1280 u_long physmem_tunable; 1281 pt_entry_t *pte; 1282 struct bios_smap *smapbase, *smap, *smapend; 1283 u_int32_t smapsize; 1284 quad_t dcons_addr, dcons_size; 1285 1286 bzero(physmap, sizeof(physmap)); 1287 basemem = 0; 1288 physmap_idx = 0; 1289 1290 /* 1291 * get memory map from INT 15:E820, kindly supplied by the loader. 1292 * 1293 * subr_module.c says: 1294 * "Consumer may safely assume that size value precedes data." 1295 * ie: an int32_t immediately precedes smap. 1296 */ 1297 smapbase = (struct bios_smap *)preload_search_info(kmdp, 1298 MODINFO_METADATA | MODINFOMD_SMAP); 1299 if (smapbase == NULL) 1300 panic("No BIOS smap info from loader!"); 1301 1302 smapsize = *((u_int32_t *)smapbase - 1); 1303 smapend = (struct bios_smap *)((uintptr_t)smapbase + smapsize); 1304 1305 for (smap = smapbase; smap < smapend; smap++) 1306 if (!add_smap_entry(smap, physmap, &physmap_idx)) 1307 break; 1308 1309 /* 1310 * Find the 'base memory' segment for SMP 1311 */ 1312 basemem = 0; 1313 for (i = 0; i <= physmap_idx; i += 2) { 1314 if (physmap[i] == 0x00000000) { 1315 basemem = physmap[i + 1] / 1024; 1316 break; 1317 } 1318 } 1319 if (basemem == 0) 1320 panic("BIOS smap did not include a basemem segment!"); 1321 1322#ifdef SMP 1323 /* make hole for AP bootstrap code */ 1324 physmap[1] = mp_bootaddress(physmap[1] / 1024); 1325#endif 1326 1327 /* 1328 * Maxmem isn't the "maximum memory", it's one larger than the 1329 * highest page of the physical address space. It should be 1330 * called something like "Maxphyspage". We may adjust this 1331 * based on ``hw.physmem'' and the results of the memory test. 1332 */ 1333 Maxmem = atop(physmap[physmap_idx + 1]); 1334 1335#ifdef MAXMEM 1336 Maxmem = MAXMEM / 4; 1337#endif 1338 1339 if (TUNABLE_ULONG_FETCH("hw.physmem", &physmem_tunable)) 1340 Maxmem = atop(physmem_tunable); 1341 1342 /* 1343 * Don't allow MAXMEM or hw.physmem to extend the amount of memory 1344 * in the system. 1345 */ 1346 if (Maxmem > atop(physmap[physmap_idx + 1])) 1347 Maxmem = atop(physmap[physmap_idx + 1]); 1348 1349 if (atop(physmap[physmap_idx + 1]) != Maxmem && 1350 (boothowto & RB_VERBOSE)) 1351 printf("Physical memory use set to %ldK\n", Maxmem * 4); 1352 1353 /* call pmap initialization to make new kernel address space */ 1354 pmap_bootstrap(&first); 1355 1356 /* 1357 * Size up each available chunk of physical memory. 1358 */ 1359 physmap[0] = PAGE_SIZE; /* mask off page 0 */ 1360 pa_indx = 0; 1361 da_indx = 1; 1362 phys_avail[pa_indx++] = physmap[0]; 1363 phys_avail[pa_indx] = physmap[0]; 1364 dump_avail[da_indx] = physmap[0]; 1365 pte = CMAP1; 1366 1367 /* 1368 * Get dcons buffer address 1369 */ 1370 if (getenv_quad("dcons.addr", &dcons_addr) == 0 || 1371 getenv_quad("dcons.size", &dcons_size) == 0) 1372 dcons_addr = 0; 1373 1374 /* 1375 * physmap is in bytes, so when converting to page boundaries, 1376 * round up the start address and round down the end address. 1377 */ 1378 for (i = 0; i <= physmap_idx; i += 2) { 1379 vm_paddr_t end; 1380 1381 end = ptoa((vm_paddr_t)Maxmem); 1382 if (physmap[i + 1] < end) 1383 end = trunc_page(physmap[i + 1]); 1384 for (pa = round_page(physmap[i]); pa < end; pa += PAGE_SIZE) { 1385 int tmp, page_bad, full; 1386 int *ptr = (int *)CADDR1; 1387 1388 full = FALSE; 1389 /* 1390 * block out kernel memory as not available. 1391 */ 1392 if (pa >= 0x100000 && pa < first) 1393 goto do_dump_avail; 1394 1395 /* 1396 * block out dcons buffer 1397 */ 1398 if (dcons_addr > 0 1399 && pa >= trunc_page(dcons_addr) 1400 && pa < dcons_addr + dcons_size) 1401 goto do_dump_avail; 1402 1403 page_bad = FALSE; 1404 1405 /* 1406 * map page into kernel: valid, read/write,non-cacheable 1407 */ 1408 *pte = pa | PG_V | PG_RW | PG_N; 1409 invltlb(); 1410 1411 tmp = *(int *)ptr; 1412 /* 1413 * Test for alternating 1's and 0's 1414 */ 1415 *(volatile int *)ptr = 0xaaaaaaaa; 1416 if (*(volatile int *)ptr != 0xaaaaaaaa) 1417 page_bad = TRUE; 1418 /* 1419 * Test for alternating 0's and 1's 1420 */ 1421 *(volatile int *)ptr = 0x55555555; 1422 if (*(volatile int *)ptr != 0x55555555) 1423 page_bad = TRUE; 1424 /* 1425 * Test for all 1's 1426 */ 1427 *(volatile int *)ptr = 0xffffffff; 1428 if (*(volatile int *)ptr != 0xffffffff) 1429 page_bad = TRUE; 1430 /* 1431 * Test for all 0's 1432 */ 1433 *(volatile int *)ptr = 0x0; 1434 if (*(volatile int *)ptr != 0x0) 1435 page_bad = TRUE; 1436 /* 1437 * Restore original value. 1438 */ 1439 *(int *)ptr = tmp; 1440 1441 /* 1442 * Adjust array of valid/good pages. 1443 */ 1444 if (page_bad == TRUE) 1445 continue; 1446 /* 1447 * If this good page is a continuation of the 1448 * previous set of good pages, then just increase 1449 * the end pointer. Otherwise start a new chunk. 1450 * Note that "end" points one higher than end, 1451 * making the range >= start and < end. 1452 * If we're also doing a speculative memory 1453 * test and we at or past the end, bump up Maxmem 1454 * so that we keep going. The first bad page 1455 * will terminate the loop. 1456 */ 1457 if (phys_avail[pa_indx] == pa) { 1458 phys_avail[pa_indx] += PAGE_SIZE; 1459 } else { 1460 pa_indx++; 1461 if (pa_indx == PHYS_AVAIL_ARRAY_END) { 1462 printf( 1463 "Too many holes in the physical address space, giving up\n"); 1464 pa_indx--; 1465 full = TRUE; 1466 goto do_dump_avail; 1467 } 1468 phys_avail[pa_indx++] = pa; /* start */ 1469 phys_avail[pa_indx] = pa + PAGE_SIZE; /* end */ 1470 } 1471 physmem++; 1472do_dump_avail: 1473 if (dump_avail[da_indx] == pa) { 1474 dump_avail[da_indx] += PAGE_SIZE; 1475 } else { 1476 da_indx++; 1477 if (da_indx == DUMP_AVAIL_ARRAY_END) { 1478 da_indx--; 1479 goto do_next; 1480 } 1481 dump_avail[da_indx++] = pa; /* start */ 1482 dump_avail[da_indx] = pa + PAGE_SIZE; /* end */ 1483 } 1484do_next: 1485 if (full) 1486 break; 1487 } 1488 } 1489 *pte = 0; 1490 invltlb(); 1491 1492 /* 1493 * XXX 1494 * The last chunk must contain at least one page plus the message 1495 * buffer to avoid complicating other code (message buffer address 1496 * calculation, etc.). 1497 */ 1498 while (phys_avail[pa_indx - 1] + PAGE_SIZE + 1499 round_page(MSGBUF_SIZE) >= phys_avail[pa_indx]) { 1500 physmem -= atop(phys_avail[pa_indx] - phys_avail[pa_indx - 1]); 1501 phys_avail[pa_indx--] = 0; 1502 phys_avail[pa_indx--] = 0; 1503 } 1504 1505 Maxmem = atop(phys_avail[pa_indx]); 1506 1507 /* Trim off space for the message buffer. */ 1508 phys_avail[pa_indx] -= round_page(MSGBUF_SIZE); 1509 1510 /* Map the message buffer. */ 1511 msgbufp = (struct msgbuf *)PHYS_TO_DMAP(phys_avail[pa_indx]); 1512} 1513 1514u_int64_t 1515hammer_time(u_int64_t modulep, u_int64_t physfree) 1516{ 1517 caddr_t kmdp; 1518 int gsel_tss, x; 1519 struct pcpu *pc; 1520 struct nmi_pcpu *np; 1521 u_int64_t msr; 1522 char *env; 1523 1524 thread0.td_kstack = physfree + KERNBASE; 1525 bzero((void *)thread0.td_kstack, KSTACK_PAGES * PAGE_SIZE); 1526 physfree += KSTACK_PAGES * PAGE_SIZE; 1527 thread0.td_pcb = (struct pcb *) 1528 (thread0.td_kstack + KSTACK_PAGES * PAGE_SIZE) - 1; 1529 1530 /* 1531 * This may be done better later if it gets more high level 1532 * components in it. If so just link td->td_proc here. 1533 */ 1534 proc_linkup0(&proc0, &thread0); 1535 1536 preload_metadata = (caddr_t)(uintptr_t)(modulep + KERNBASE); 1537 preload_bootstrap_relocate(KERNBASE); 1538 kmdp = preload_search_by_type("elf kernel"); 1539 if (kmdp == NULL) 1540 kmdp = preload_search_by_type("elf64 kernel"); 1541 boothowto = MD_FETCH(kmdp, MODINFOMD_HOWTO, int); 1542 kern_envp = MD_FETCH(kmdp, MODINFOMD_ENVP, char *) + KERNBASE; 1543#ifdef DDB 1544 ksym_start = MD_FETCH(kmdp, MODINFOMD_SSYM, uintptr_t); 1545 ksym_end = MD_FETCH(kmdp, MODINFOMD_ESYM, uintptr_t); 1546#endif 1547 1548 /* Init basic tunables, hz etc */ 1549 init_param1(); 1550 1551 /* 1552 * make gdt memory segments 1553 */ 1554 for (x = 0; x < NGDT; x++) { 1555 if (x != GPROC0_SEL && x != (GPROC0_SEL + 1) && 1556 x != GUSERLDT_SEL && x != (GUSERLDT_SEL) + 1) 1557 ssdtosd(&gdt_segs[x], &gdt[x]); 1558 } 1559 gdt_segs[GPROC0_SEL].ssd_base = (uintptr_t)&common_tss[0]; 1560 ssdtosyssd(&gdt_segs[GPROC0_SEL], 1561 (struct system_segment_descriptor *)&gdt[GPROC0_SEL]); 1562 1563 r_gdt.rd_limit = NGDT * sizeof(gdt[0]) - 1; 1564 r_gdt.rd_base = (long) gdt; 1565 lgdt(&r_gdt); 1566 pc = &__pcpu[0]; 1567 1568 wrmsr(MSR_FSBASE, 0); /* User value */ 1569 wrmsr(MSR_GSBASE, (u_int64_t)pc); 1570 wrmsr(MSR_KGSBASE, 0); /* User value while in the kernel */ 1571 1572 pcpu_init(pc, 0, sizeof(struct pcpu)); 1573 dpcpu_init((void *)(physfree + KERNBASE), 0); 1574 physfree += DPCPU_SIZE; 1575 PCPU_SET(prvspace, pc); 1576 PCPU_SET(curthread, &thread0); 1577 PCPU_SET(curpcb, thread0.td_pcb); 1578 PCPU_SET(tssp, &common_tss[0]); 1579 PCPU_SET(commontssp, &common_tss[0]); 1580 PCPU_SET(tss, (struct system_segment_descriptor *)&gdt[GPROC0_SEL]); 1581 PCPU_SET(ldt, (struct system_segment_descriptor *)&gdt[GUSERLDT_SEL]); 1582 PCPU_SET(fs32p, &gdt[GUFS32_SEL]); 1583 PCPU_SET(gs32p, &gdt[GUGS32_SEL]); 1584 1585 /* 1586 * Initialize mutexes. 1587 * 1588 * icu_lock: in order to allow an interrupt to occur in a critical 1589 * section, to set pcpu->ipending (etc...) properly, we 1590 * must be able to get the icu lock, so it can't be 1591 * under witness. 1592 */ 1593 mutex_init(); 1594 mtx_init(&icu_lock, "icu", NULL, MTX_SPIN | MTX_NOWITNESS); 1595 mtx_init(&dt_lock, "descriptor tables", NULL, MTX_DEF); 1596 1597 /* exceptions */ 1598 for (x = 0; x < NIDT; x++) 1599 setidt(x, &IDTVEC(rsvd), SDT_SYSIGT, SEL_KPL, 0); 1600 setidt(IDT_DE, &IDTVEC(div), SDT_SYSIGT, SEL_KPL, 0); 1601 setidt(IDT_DB, &IDTVEC(dbg), SDT_SYSIGT, SEL_KPL, 0); 1602 setidt(IDT_NMI, &IDTVEC(nmi), SDT_SYSIGT, SEL_KPL, 2); 1603 setidt(IDT_BP, &IDTVEC(bpt), SDT_SYSIGT, SEL_UPL, 0); 1604 setidt(IDT_OF, &IDTVEC(ofl), SDT_SYSIGT, SEL_KPL, 0); 1605 setidt(IDT_BR, &IDTVEC(bnd), SDT_SYSIGT, SEL_KPL, 0); 1606 setidt(IDT_UD, &IDTVEC(ill), SDT_SYSIGT, SEL_KPL, 0); 1607 setidt(IDT_NM, &IDTVEC(dna), SDT_SYSIGT, SEL_KPL, 0); 1608 setidt(IDT_DF, &IDTVEC(dblfault), SDT_SYSIGT, SEL_KPL, 1); 1609 setidt(IDT_FPUGP, &IDTVEC(fpusegm), SDT_SYSIGT, SEL_KPL, 0); 1610 setidt(IDT_TS, &IDTVEC(tss), SDT_SYSIGT, SEL_KPL, 0); 1611 setidt(IDT_NP, &IDTVEC(missing), SDT_SYSIGT, SEL_KPL, 0); 1612 setidt(IDT_SS, &IDTVEC(stk), SDT_SYSIGT, SEL_KPL, 0); 1613 setidt(IDT_GP, &IDTVEC(prot), SDT_SYSIGT, SEL_KPL, 0); 1614 setidt(IDT_PF, &IDTVEC(page), SDT_SYSIGT, SEL_KPL, 0); 1615 setidt(IDT_MF, &IDTVEC(fpu), SDT_SYSIGT, SEL_KPL, 0); 1616 setidt(IDT_AC, &IDTVEC(align), SDT_SYSIGT, SEL_KPL, 0); 1617 setidt(IDT_MC, &IDTVEC(mchk), SDT_SYSIGT, SEL_KPL, 0); 1618 setidt(IDT_XF, &IDTVEC(xmm), SDT_SYSIGT, SEL_KPL, 0); 1619 1620 r_idt.rd_limit = sizeof(idt0) - 1; 1621 r_idt.rd_base = (long) idt; 1622 lidt(&r_idt); 1623 1624 /* 1625 * Initialize the i8254 before the console so that console 1626 * initialization can use DELAY(). 1627 */ 1628 i8254_init(); 1629 1630 /* 1631 * Initialize the console before we print anything out. 1632 */ 1633 cninit(); 1634 1635#ifdef DEV_ISA 1636#ifdef DEV_ATPIC 1637 elcr_probe(); 1638 atpic_startup(); 1639#else 1640 /* Reset and mask the atpics and leave them shut down. */ 1641 atpic_reset(); 1642 1643 /* 1644 * Point the ICU spurious interrupt vectors at the APIC spurious 1645 * interrupt handler. 1646 */ 1647 setidt(IDT_IO_INTS + 7, IDTVEC(spuriousint), SDT_SYSIGT, SEL_KPL, 0); 1648 setidt(IDT_IO_INTS + 15, IDTVEC(spuriousint), SDT_SYSIGT, SEL_KPL, 0); 1649#endif 1650#else 1651#error "have you forgotten the isa device?"; 1652#endif 1653 1654 kdb_init(); 1655 1656#ifdef KDB 1657 if (boothowto & RB_KDB) 1658 kdb_enter(KDB_WHY_BOOTFLAGS, 1659 "Boot flags requested debugger"); 1660#endif 1661 1662 identify_cpu(); /* Final stage of CPU initialization */ 1663 initializecpu(); /* Initialize CPU registers */ 1664 initializecpucache(); 1665 1666 /* make an initial tss so cpu can get interrupt stack on syscall! */ 1667 common_tss[0].tss_rsp0 = thread0.td_kstack + \ 1668 KSTACK_PAGES * PAGE_SIZE - sizeof(struct pcb); 1669 /* Ensure the stack is aligned to 16 bytes */ 1670 common_tss[0].tss_rsp0 &= ~0xFul; 1671 PCPU_SET(rsp0, common_tss[0].tss_rsp0); 1672 1673 /* doublefault stack space, runs on ist1 */ 1674 common_tss[0].tss_ist1 = (long)&dblfault_stack[sizeof(dblfault_stack)]; 1675 1676 /* 1677 * NMI stack, runs on ist2. The pcpu pointer is stored just 1678 * above the start of the ist2 stack. 1679 */ 1680 np = ((struct nmi_pcpu *) &nmi0_stack[sizeof(nmi0_stack)]) - 1; 1681 np->np_pcpu = (register_t) pc; 1682 common_tss[0].tss_ist2 = (long) np; 1683 1684 /* Set the IO permission bitmap (empty due to tss seg limit) */ 1685 common_tss[0].tss_iobase = sizeof(struct amd64tss) + 1686 IOPAGES * PAGE_SIZE; 1687 1688 gsel_tss = GSEL(GPROC0_SEL, SEL_KPL); 1689 ltr(gsel_tss); 1690 1691 /* Set up the fast syscall stuff */ 1692 msr = rdmsr(MSR_EFER) | EFER_SCE; 1693 wrmsr(MSR_EFER, msr); 1694 wrmsr(MSR_LSTAR, (u_int64_t)IDTVEC(fast_syscall)); 1695 wrmsr(MSR_CSTAR, (u_int64_t)IDTVEC(fast_syscall32)); 1696 msr = ((u_int64_t)GSEL(GCODE_SEL, SEL_KPL) << 32) | 1697 ((u_int64_t)GSEL(GUCODE32_SEL, SEL_UPL) << 48); 1698 wrmsr(MSR_STAR, msr); 1699 wrmsr(MSR_SF_MASK, PSL_NT|PSL_T|PSL_I|PSL_C|PSL_D); 1700 1701 getmemsize(kmdp, physfree); 1702 init_param2(physmem); 1703 1704 /* now running on new page tables, configured,and u/iom is accessible */ 1705 1706 msgbufinit(msgbufp, MSGBUF_SIZE); 1707 fpuinit(); 1708 1709 /* transfer to user mode */ 1710 1711 _ucodesel = GSEL(GUCODE_SEL, SEL_UPL); 1712 _udatasel = GSEL(GUDATA_SEL, SEL_UPL); 1713 _ucode32sel = GSEL(GUCODE32_SEL, SEL_UPL); 1714 _ufssel = GSEL(GUFS32_SEL, SEL_UPL); 1715 _ugssel = GSEL(GUGS32_SEL, SEL_UPL); 1716 1717 load_ds(_udatasel); 1718 load_es(_udatasel); 1719 load_fs(_ufssel); 1720 1721 /* setup proc 0's pcb */ 1722 thread0.td_pcb->pcb_flags = 0; 1723 thread0.td_pcb->pcb_cr3 = KPML4phys; 1724 thread0.td_frame = &proc0_tf; 1725 1726 env = getenv("kernelname"); 1727 if (env != NULL) 1728 strlcpy(kernelname, env, sizeof(kernelname)); 1729 1730#ifdef XENHVM 1731 if (inw(0x10) == 0x49d2) { 1732 if (bootverbose) 1733 printf("Xen detected: disabling emulated block and network devices\n"); 1734 outw(0x10, 3); 1735 } 1736#endif 1737 1738 if (cpu_probe_amdc1e()) 1739 cpu_idle_fn = cpu_idle_amdc1e; 1740 1741 /* Location of kernel stack for locore */ 1742 return ((u_int64_t)thread0.td_pcb); 1743} 1744 1745void 1746cpu_pcpu_init(struct pcpu *pcpu, int cpuid, size_t size) 1747{ 1748 1749 pcpu->pc_acpi_id = 0xffffffff; 1750} 1751 1752void 1753spinlock_enter(void) 1754{ 1755 struct thread *td; 1756 1757 td = curthread; 1758 if (td->td_md.md_spinlock_count == 0) 1759 td->td_md.md_saved_flags = intr_disable(); 1760 td->td_md.md_spinlock_count++; 1761 critical_enter(); 1762} 1763 1764void 1765spinlock_exit(void) 1766{ 1767 struct thread *td; 1768 1769 td = curthread; 1770 critical_exit(); 1771 td->td_md.md_spinlock_count--; 1772 if (td->td_md.md_spinlock_count == 0) 1773 intr_restore(td->td_md.md_saved_flags); 1774} 1775 1776/* 1777 * Construct a PCB from a trapframe. This is called from kdb_trap() where 1778 * we want to start a backtrace from the function that caused us to enter 1779 * the debugger. We have the context in the trapframe, but base the trace 1780 * on the PCB. The PCB doesn't have to be perfect, as long as it contains 1781 * enough for a backtrace. 1782 */ 1783void 1784makectx(struct trapframe *tf, struct pcb *pcb) 1785{ 1786 1787 pcb->pcb_r12 = tf->tf_r12; 1788 pcb->pcb_r13 = tf->tf_r13; 1789 pcb->pcb_r14 = tf->tf_r14; 1790 pcb->pcb_r15 = tf->tf_r15; 1791 pcb->pcb_rbp = tf->tf_rbp; 1792 pcb->pcb_rbx = tf->tf_rbx; 1793 pcb->pcb_rip = tf->tf_rip; 1794 pcb->pcb_rsp = (ISPL(tf->tf_cs)) ? tf->tf_rsp : (long)(tf + 1) - 8; 1795} 1796 1797int 1798ptrace_set_pc(struct thread *td, unsigned long addr) 1799{ 1800 td->td_frame->tf_rip = addr; 1801 return (0); 1802} 1803 1804int 1805ptrace_single_step(struct thread *td) 1806{ 1807 td->td_frame->tf_rflags |= PSL_T; 1808 return (0); 1809} 1810 1811int 1812ptrace_clear_single_step(struct thread *td) 1813{ 1814 td->td_frame->tf_rflags &= ~PSL_T; 1815 return (0); 1816} 1817 1818int 1819fill_regs(struct thread *td, struct reg *regs) 1820{ 1821 struct trapframe *tp; 1822 1823 tp = td->td_frame; 1824 regs->r_r15 = tp->tf_r15; 1825 regs->r_r14 = tp->tf_r14; 1826 regs->r_r13 = tp->tf_r13; 1827 regs->r_r12 = tp->tf_r12; 1828 regs->r_r11 = tp->tf_r11; 1829 regs->r_r10 = tp->tf_r10; 1830 regs->r_r9 = tp->tf_r9; 1831 regs->r_r8 = tp->tf_r8; 1832 regs->r_rdi = tp->tf_rdi; 1833 regs->r_rsi = tp->tf_rsi; 1834 regs->r_rbp = tp->tf_rbp; 1835 regs->r_rbx = tp->tf_rbx; 1836 regs->r_rdx = tp->tf_rdx; 1837 regs->r_rcx = tp->tf_rcx; 1838 regs->r_rax = tp->tf_rax; 1839 regs->r_rip = tp->tf_rip; 1840 regs->r_cs = tp->tf_cs; 1841 regs->r_rflags = tp->tf_rflags; 1842 regs->r_rsp = tp->tf_rsp; 1843 regs->r_ss = tp->tf_ss; 1844 if (tp->tf_flags & TF_HASSEGS) { 1845 regs->r_ds = tp->tf_ds; 1846 regs->r_es = tp->tf_es; 1847 regs->r_fs = tp->tf_fs; 1848 regs->r_gs = tp->tf_gs; 1849 } else { 1850 regs->r_ds = 0; 1851 regs->r_es = 0; 1852 regs->r_fs = 0; 1853 regs->r_gs = 0; 1854 } 1855 return (0); 1856} 1857 1858int 1859set_regs(struct thread *td, struct reg *regs) 1860{ 1861 struct trapframe *tp; 1862 register_t rflags; 1863 1864 tp = td->td_frame; 1865 rflags = regs->r_rflags & 0xffffffff; 1866 if (!EFL_SECURE(rflags, tp->tf_rflags) || !CS_SECURE(regs->r_cs)) 1867 return (EINVAL); 1868 tp->tf_r15 = regs->r_r15; 1869 tp->tf_r14 = regs->r_r14; 1870 tp->tf_r13 = regs->r_r13; 1871 tp->tf_r12 = regs->r_r12; 1872 tp->tf_r11 = regs->r_r11; 1873 tp->tf_r10 = regs->r_r10; 1874 tp->tf_r9 = regs->r_r9; 1875 tp->tf_r8 = regs->r_r8; 1876 tp->tf_rdi = regs->r_rdi; 1877 tp->tf_rsi = regs->r_rsi; 1878 tp->tf_rbp = regs->r_rbp; 1879 tp->tf_rbx = regs->r_rbx; 1880 tp->tf_rdx = regs->r_rdx; 1881 tp->tf_rcx = regs->r_rcx; 1882 tp->tf_rax = regs->r_rax; 1883 tp->tf_rip = regs->r_rip; 1884 tp->tf_cs = regs->r_cs; 1885 tp->tf_rflags = rflags; 1886 tp->tf_rsp = regs->r_rsp; 1887 tp->tf_ss = regs->r_ss; 1888 if (0) { /* XXXKIB */ 1889 tp->tf_ds = regs->r_ds; 1890 tp->tf_es = regs->r_es; 1891 tp->tf_fs = regs->r_fs; 1892 tp->tf_gs = regs->r_gs; 1893 tp->tf_flags = TF_HASSEGS; 1894 } 1895 td->td_pcb->pcb_flags |= PCB_FULLCTX; 1896 return (0); 1897} 1898 1899/* XXX check all this stuff! */ 1900/* externalize from sv_xmm */ 1901static void 1902fill_fpregs_xmm(struct savefpu *sv_xmm, struct fpreg *fpregs) 1903{ 1904 struct envxmm *penv_fpreg = (struct envxmm *)&fpregs->fpr_env; 1905 struct envxmm *penv_xmm = &sv_xmm->sv_env; 1906 int i; 1907 1908 /* pcb -> fpregs */ 1909 bzero(fpregs, sizeof(*fpregs)); 1910 1911 /* FPU control/status */ 1912 penv_fpreg->en_cw = penv_xmm->en_cw; 1913 penv_fpreg->en_sw = penv_xmm->en_sw; 1914 penv_fpreg->en_tw = penv_xmm->en_tw; 1915 penv_fpreg->en_opcode = penv_xmm->en_opcode; 1916 penv_fpreg->en_rip = penv_xmm->en_rip; 1917 penv_fpreg->en_rdp = penv_xmm->en_rdp; 1918 penv_fpreg->en_mxcsr = penv_xmm->en_mxcsr; 1919 penv_fpreg->en_mxcsr_mask = penv_xmm->en_mxcsr_mask; 1920 1921 /* FPU registers */ 1922 for (i = 0; i < 8; ++i) 1923 bcopy(sv_xmm->sv_fp[i].fp_acc.fp_bytes, fpregs->fpr_acc[i], 10); 1924 1925 /* SSE registers */ 1926 for (i = 0; i < 16; ++i) 1927 bcopy(sv_xmm->sv_xmm[i].xmm_bytes, fpregs->fpr_xacc[i], 16); 1928} 1929 1930/* internalize from fpregs into sv_xmm */ 1931static void 1932set_fpregs_xmm(struct fpreg *fpregs, struct savefpu *sv_xmm) 1933{ 1934 struct envxmm *penv_xmm = &sv_xmm->sv_env; 1935 struct envxmm *penv_fpreg = (struct envxmm *)&fpregs->fpr_env; 1936 int i; 1937 1938 /* fpregs -> pcb */ 1939 /* FPU control/status */ 1940 penv_xmm->en_cw = penv_fpreg->en_cw; 1941 penv_xmm->en_sw = penv_fpreg->en_sw; 1942 penv_xmm->en_tw = penv_fpreg->en_tw; 1943 penv_xmm->en_opcode = penv_fpreg->en_opcode; 1944 penv_xmm->en_rip = penv_fpreg->en_rip; 1945 penv_xmm->en_rdp = penv_fpreg->en_rdp; 1946 penv_xmm->en_mxcsr = penv_fpreg->en_mxcsr; 1947 penv_xmm->en_mxcsr_mask = penv_fpreg->en_mxcsr_mask & cpu_mxcsr_mask; 1948 1949 /* FPU registers */ 1950 for (i = 0; i < 8; ++i) 1951 bcopy(fpregs->fpr_acc[i], sv_xmm->sv_fp[i].fp_acc.fp_bytes, 10); 1952 1953 /* SSE registers */ 1954 for (i = 0; i < 16; ++i) 1955 bcopy(fpregs->fpr_xacc[i], sv_xmm->sv_xmm[i].xmm_bytes, 16); 1956} 1957 1958/* externalize from td->pcb */ 1959int 1960fill_fpregs(struct thread *td, struct fpreg *fpregs) 1961{ 1962 1963 fill_fpregs_xmm(&td->td_pcb->pcb_save, fpregs); 1964 return (0); 1965} 1966 1967/* internalize to td->pcb */ 1968int 1969set_fpregs(struct thread *td, struct fpreg *fpregs) 1970{ 1971 1972 set_fpregs_xmm(fpregs, &td->td_pcb->pcb_save); 1973 return (0); 1974} 1975 1976/* 1977 * Get machine context. 1978 */ 1979int 1980get_mcontext(struct thread *td, mcontext_t *mcp, int flags) 1981{ 1982 struct trapframe *tp; 1983 1984 tp = td->td_frame; 1985 PROC_LOCK(curthread->td_proc); 1986 mcp->mc_onstack = sigonstack(tp->tf_rsp); 1987 PROC_UNLOCK(curthread->td_proc); 1988 mcp->mc_r15 = tp->tf_r15; 1989 mcp->mc_r14 = tp->tf_r14; 1990 mcp->mc_r13 = tp->tf_r13; 1991 mcp->mc_r12 = tp->tf_r12; 1992 mcp->mc_r11 = tp->tf_r11; 1993 mcp->mc_r10 = tp->tf_r10; 1994 mcp->mc_r9 = tp->tf_r9; 1995 mcp->mc_r8 = tp->tf_r8; 1996 mcp->mc_rdi = tp->tf_rdi; 1997 mcp->mc_rsi = tp->tf_rsi; 1998 mcp->mc_rbp = tp->tf_rbp; 1999 mcp->mc_rbx = tp->tf_rbx; 2000 mcp->mc_rcx = tp->tf_rcx; 2001 mcp->mc_rflags = tp->tf_rflags; 2002 if (flags & GET_MC_CLEAR_RET) { 2003 mcp->mc_rax = 0; 2004 mcp->mc_rdx = 0; 2005 mcp->mc_rflags &= ~PSL_C; 2006 } else { 2007 mcp->mc_rax = tp->tf_rax; 2008 mcp->mc_rdx = tp->tf_rdx; 2009 } 2010 mcp->mc_rip = tp->tf_rip; 2011 mcp->mc_cs = tp->tf_cs; 2012 mcp->mc_rsp = tp->tf_rsp; 2013 mcp->mc_ss = tp->tf_ss; 2014 mcp->mc_ds = tp->tf_ds; 2015 mcp->mc_es = tp->tf_es; 2016 mcp->mc_fs = tp->tf_fs; 2017 mcp->mc_gs = tp->tf_gs; 2018 mcp->mc_flags = tp->tf_flags; 2019 mcp->mc_len = sizeof(*mcp); 2020 get_fpcontext(td, mcp); 2021 mcp->mc_fsbase = td->td_pcb->pcb_fsbase; 2022 mcp->mc_gsbase = td->td_pcb->pcb_gsbase; 2023 return (0); 2024} 2025 2026/* 2027 * Set machine context. 2028 * 2029 * However, we don't set any but the user modifiable flags, and we won't 2030 * touch the cs selector. 2031 */ 2032int 2033set_mcontext(struct thread *td, const mcontext_t *mcp) 2034{ 2035 struct trapframe *tp; 2036 long rflags; 2037 int ret; 2038 2039 tp = td->td_frame; 2040 if (mcp->mc_len != sizeof(*mcp) || 2041 (mcp->mc_flags & ~_MC_FLAG_MASK) != 0) 2042 return (EINVAL); 2043 rflags = (mcp->mc_rflags & PSL_USERCHANGE) | 2044 (tp->tf_rflags & ~PSL_USERCHANGE); 2045 ret = set_fpcontext(td, mcp); 2046 if (ret != 0) 2047 return (ret); 2048 tp->tf_r15 = mcp->mc_r15; 2049 tp->tf_r14 = mcp->mc_r14; 2050 tp->tf_r13 = mcp->mc_r13; 2051 tp->tf_r12 = mcp->mc_r12; 2052 tp->tf_r11 = mcp->mc_r11; 2053 tp->tf_r10 = mcp->mc_r10; 2054 tp->tf_r9 = mcp->mc_r9; 2055 tp->tf_r8 = mcp->mc_r8; 2056 tp->tf_rdi = mcp->mc_rdi; 2057 tp->tf_rsi = mcp->mc_rsi; 2058 tp->tf_rbp = mcp->mc_rbp; 2059 tp->tf_rbx = mcp->mc_rbx; 2060 tp->tf_rdx = mcp->mc_rdx; 2061 tp->tf_rcx = mcp->mc_rcx; 2062 tp->tf_rax = mcp->mc_rax; 2063 tp->tf_rip = mcp->mc_rip; 2064 tp->tf_rflags = rflags; 2065 tp->tf_rsp = mcp->mc_rsp; 2066 tp->tf_ss = mcp->mc_ss; 2067 tp->tf_flags = mcp->mc_flags; 2068 if (tp->tf_flags & TF_HASSEGS) { 2069 tp->tf_ds = mcp->mc_ds; 2070 tp->tf_es = mcp->mc_es; 2071 tp->tf_fs = mcp->mc_fs; 2072 tp->tf_gs = mcp->mc_gs; 2073 } 2074 if (mcp->mc_flags & _MC_HASBASES) { 2075 td->td_pcb->pcb_fsbase = mcp->mc_fsbase; 2076 td->td_pcb->pcb_gsbase = mcp->mc_gsbase; 2077 } 2078 td->td_pcb->pcb_flags |= PCB_FULLCTX; 2079 td->td_pcb->pcb_full_iret = 1; 2080 return (0); 2081} 2082 2083static void 2084get_fpcontext(struct thread *td, mcontext_t *mcp) 2085{ 2086 2087 mcp->mc_ownedfp = fpugetregs(td, (struct savefpu *)&mcp->mc_fpstate); 2088 mcp->mc_fpformat = fpuformat(); 2089} 2090 2091static int 2092set_fpcontext(struct thread *td, const mcontext_t *mcp) 2093{ 2094 struct savefpu *fpstate; 2095 2096 if (mcp->mc_fpformat == _MC_FPFMT_NODEV) 2097 return (0); 2098 else if (mcp->mc_fpformat != _MC_FPFMT_XMM) 2099 return (EINVAL); 2100 else if (mcp->mc_ownedfp == _MC_FPOWNED_NONE) 2101 /* We don't care what state is left in the FPU or PCB. */ 2102 fpstate_drop(td); 2103 else if (mcp->mc_ownedfp == _MC_FPOWNED_FPU || 2104 mcp->mc_ownedfp == _MC_FPOWNED_PCB) { 2105 /* 2106 * XXX we violate the dubious requirement that fpusetregs() 2107 * be called with interrupts disabled. 2108 * XXX obsolete on trap-16 systems? 2109 */ 2110 fpstate = (struct savefpu *)&mcp->mc_fpstate; 2111 fpstate->sv_env.en_mxcsr &= cpu_mxcsr_mask; 2112 fpusetregs(td, fpstate); 2113 } else 2114 return (EINVAL); 2115 return (0); 2116} 2117 2118void 2119fpstate_drop(struct thread *td) 2120{ 2121 register_t s; 2122 2123 s = intr_disable(); 2124 if (PCPU_GET(fpcurthread) == td) 2125 fpudrop(); 2126 /* 2127 * XXX force a full drop of the fpu. The above only drops it if we 2128 * owned it. 2129 * 2130 * XXX I don't much like fpugetregs()'s semantics of doing a full 2131 * drop. Dropping only to the pcb matches fnsave's behaviour. 2132 * We only need to drop to !PCB_INITDONE in sendsig(). But 2133 * sendsig() is the only caller of fpugetregs()... perhaps we just 2134 * have too many layers. 2135 */ 2136 curthread->td_pcb->pcb_flags &= ~PCB_FPUINITDONE; 2137 intr_restore(s); 2138} 2139 2140int 2141fill_dbregs(struct thread *td, struct dbreg *dbregs) 2142{ 2143 struct pcb *pcb; 2144 2145 if (td == NULL) { 2146 dbregs->dr[0] = rdr0(); 2147 dbregs->dr[1] = rdr1(); 2148 dbregs->dr[2] = rdr2(); 2149 dbregs->dr[3] = rdr3(); 2150 dbregs->dr[6] = rdr6(); 2151 dbregs->dr[7] = rdr7(); 2152 } else { 2153 pcb = td->td_pcb; 2154 dbregs->dr[0] = pcb->pcb_dr0; 2155 dbregs->dr[1] = pcb->pcb_dr1; 2156 dbregs->dr[2] = pcb->pcb_dr2; 2157 dbregs->dr[3] = pcb->pcb_dr3; 2158 dbregs->dr[6] = pcb->pcb_dr6; 2159 dbregs->dr[7] = pcb->pcb_dr7; 2160 } 2161 dbregs->dr[4] = 0; 2162 dbregs->dr[5] = 0; 2163 dbregs->dr[8] = 0; 2164 dbregs->dr[9] = 0; 2165 dbregs->dr[10] = 0; 2166 dbregs->dr[11] = 0; 2167 dbregs->dr[12] = 0; 2168 dbregs->dr[13] = 0; 2169 dbregs->dr[14] = 0; 2170 dbregs->dr[15] = 0; 2171 return (0); 2172} 2173 2174int 2175set_dbregs(struct thread *td, struct dbreg *dbregs) 2176{ 2177 struct pcb *pcb; 2178 int i; 2179 2180 if (td == NULL) { 2181 load_dr0(dbregs->dr[0]); 2182 load_dr1(dbregs->dr[1]); 2183 load_dr2(dbregs->dr[2]); 2184 load_dr3(dbregs->dr[3]); 2185 load_dr6(dbregs->dr[6]); 2186 load_dr7(dbregs->dr[7]); 2187 } else { 2188 /* 2189 * Don't let an illegal value for dr7 get set. Specifically, 2190 * check for undefined settings. Setting these bit patterns 2191 * result in undefined behaviour and can lead to an unexpected 2192 * TRCTRAP or a general protection fault right here. 2193 * Upper bits of dr6 and dr7 must not be set 2194 */ 2195 for (i = 0; i < 4; i++) { 2196 if (DBREG_DR7_ACCESS(dbregs->dr[7], i) == 0x02) 2197 return (EINVAL); 2198 if (td->td_frame->tf_cs == _ucode32sel && 2199 DBREG_DR7_LEN(dbregs->dr[7], i) == DBREG_DR7_LEN_8) 2200 return (EINVAL); 2201 } 2202 if ((dbregs->dr[6] & 0xffffffff00000000ul) != 0 || 2203 (dbregs->dr[7] & 0xffffffff00000000ul) != 0) 2204 return (EINVAL); 2205 2206 pcb = td->td_pcb; 2207 2208 /* 2209 * Don't let a process set a breakpoint that is not within the 2210 * process's address space. If a process could do this, it 2211 * could halt the system by setting a breakpoint in the kernel 2212 * (if ddb was enabled). Thus, we need to check to make sure 2213 * that no breakpoints are being enabled for addresses outside 2214 * process's address space. 2215 * 2216 * XXX - what about when the watched area of the user's 2217 * address space is written into from within the kernel 2218 * ... wouldn't that still cause a breakpoint to be generated 2219 * from within kernel mode? 2220 */ 2221 2222 if (DBREG_DR7_ENABLED(dbregs->dr[7], 0)) { 2223 /* dr0 is enabled */ 2224 if (dbregs->dr[0] >= VM_MAXUSER_ADDRESS) 2225 return (EINVAL); 2226 } 2227 if (DBREG_DR7_ENABLED(dbregs->dr[7], 1)) { 2228 /* dr1 is enabled */ 2229 if (dbregs->dr[1] >= VM_MAXUSER_ADDRESS) 2230 return (EINVAL); 2231 } 2232 if (DBREG_DR7_ENABLED(dbregs->dr[7], 2)) { 2233 /* dr2 is enabled */ 2234 if (dbregs->dr[2] >= VM_MAXUSER_ADDRESS) 2235 return (EINVAL); 2236 } 2237 if (DBREG_DR7_ENABLED(dbregs->dr[7], 3)) { 2238 /* dr3 is enabled */ 2239 if (dbregs->dr[3] >= VM_MAXUSER_ADDRESS) 2240 return (EINVAL); 2241 } 2242 2243 pcb->pcb_dr0 = dbregs->dr[0]; 2244 pcb->pcb_dr1 = dbregs->dr[1]; 2245 pcb->pcb_dr2 = dbregs->dr[2]; 2246 pcb->pcb_dr3 = dbregs->dr[3]; 2247 pcb->pcb_dr6 = dbregs->dr[6]; 2248 pcb->pcb_dr7 = dbregs->dr[7]; 2249 2250 pcb->pcb_flags |= PCB_DBREGS; 2251 } 2252 2253 return (0); 2254} 2255 2256void 2257reset_dbregs(void) 2258{ 2259 2260 load_dr7(0); /* Turn off the control bits first */ 2261 load_dr0(0); 2262 load_dr1(0); 2263 load_dr2(0); 2264 load_dr3(0); 2265 load_dr6(0); 2266} 2267 2268/* 2269 * Return > 0 if a hardware breakpoint has been hit, and the 2270 * breakpoint was in user space. Return 0, otherwise. 2271 */ 2272int 2273user_dbreg_trap(void) 2274{ 2275 u_int64_t dr7, dr6; /* debug registers dr6 and dr7 */ 2276 u_int64_t bp; /* breakpoint bits extracted from dr6 */ 2277 int nbp; /* number of breakpoints that triggered */ 2278 caddr_t addr[4]; /* breakpoint addresses */ 2279 int i; 2280 2281 dr7 = rdr7(); 2282 if ((dr7 & 0x000000ff) == 0) { 2283 /* 2284 * all GE and LE bits in the dr7 register are zero, 2285 * thus the trap couldn't have been caused by the 2286 * hardware debug registers 2287 */ 2288 return 0; 2289 } 2290 2291 nbp = 0; 2292 dr6 = rdr6(); 2293 bp = dr6 & 0x0000000f; 2294 2295 if (!bp) { 2296 /* 2297 * None of the breakpoint bits are set meaning this 2298 * trap was not caused by any of the debug registers 2299 */ 2300 return 0; 2301 } 2302 2303 /* 2304 * at least one of the breakpoints were hit, check to see 2305 * which ones and if any of them are user space addresses 2306 */ 2307 2308 if (bp & 0x01) { 2309 addr[nbp++] = (caddr_t)rdr0(); 2310 } 2311 if (bp & 0x02) { 2312 addr[nbp++] = (caddr_t)rdr1(); 2313 } 2314 if (bp & 0x04) { 2315 addr[nbp++] = (caddr_t)rdr2(); 2316 } 2317 if (bp & 0x08) { 2318 addr[nbp++] = (caddr_t)rdr3(); 2319 } 2320 2321 for (i = 0; i < nbp; i++) { 2322 if (addr[i] < (caddr_t)VM_MAXUSER_ADDRESS) { 2323 /* 2324 * addr[i] is in user space 2325 */ 2326 return nbp; 2327 } 2328 } 2329 2330 /* 2331 * None of the breakpoints are in user space. 2332 */ 2333 return 0; 2334} 2335 2336#ifdef KDB 2337 2338/* 2339 * Provide inb() and outb() as functions. They are normally only available as 2340 * inline functions, thus cannot be called from the debugger. 2341 */ 2342 2343/* silence compiler warnings */ 2344u_char inb_(u_short); 2345void outb_(u_short, u_char); 2346 2347u_char 2348inb_(u_short port) 2349{ 2350 return inb(port); 2351} 2352 2353void 2354outb_(u_short port, u_char data) 2355{ 2356 outb(port, data); 2357} 2358 2359#endif /* KDB */ 2360