machdep.c revision 199253
1/*- 2 * Copyright (c) 2003 Peter Wemm. 3 * Copyright (c) 1992 Terrence R. Lambert. 4 * Copyright (c) 1982, 1987, 1990 The Regents of the University of California. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to Berkeley by 8 * William Jolitz. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. All advertising materials mentioning features or use of this software 19 * must display the following acknowledgement: 20 * This product includes software developed by the University of 21 * California, Berkeley and its contributors. 22 * 4. Neither the name of the University nor the names of its contributors 23 * may be used to endorse or promote products derived from this software 24 * without specific prior written permission. 25 * 26 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 27 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 28 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 29 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 30 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 31 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 32 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 33 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 34 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 35 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 36 * SUCH DAMAGE. 37 * 38 * from: @(#)machdep.c 7.4 (Berkeley) 6/3/91 39 */ 40 41#include <sys/cdefs.h> 42__FBSDID("$FreeBSD: head/sys/amd64/amd64/machdep.c 199253 2009-11-13 13:07:01Z kib $"); 43 44#include "opt_atalk.h" 45#include "opt_atpic.h" 46#include "opt_compat.h" 47#include "opt_cpu.h" 48#include "opt_ddb.h" 49#include "opt_inet.h" 50#include "opt_ipx.h" 51#include "opt_isa.h" 52#include "opt_kstack_pages.h" 53#include "opt_maxmem.h" 54#include "opt_msgbuf.h" 55#include "opt_perfmon.h" 56#include "opt_sched.h" 57 58#include <sys/param.h> 59#include <sys/proc.h> 60#include <sys/systm.h> 61#include <sys/bio.h> 62#include <sys/buf.h> 63#include <sys/bus.h> 64#include <sys/callout.h> 65#include <sys/cons.h> 66#include <sys/cpu.h> 67#include <sys/eventhandler.h> 68#include <sys/exec.h> 69#include <sys/imgact.h> 70#include <sys/kdb.h> 71#include <sys/kernel.h> 72#include <sys/ktr.h> 73#include <sys/linker.h> 74#include <sys/lock.h> 75#include <sys/malloc.h> 76#include <sys/memrange.h> 77#include <sys/msgbuf.h> 78#include <sys/mutex.h> 79#include <sys/pcpu.h> 80#include <sys/ptrace.h> 81#include <sys/reboot.h> 82#include <sys/sched.h> 83#include <sys/signalvar.h> 84#include <sys/sysctl.h> 85#include <sys/sysent.h> 86#include <sys/sysproto.h> 87#include <sys/ucontext.h> 88#include <sys/vmmeter.h> 89 90#include <vm/vm.h> 91#include <vm/vm_extern.h> 92#include <vm/vm_kern.h> 93#include <vm/vm_page.h> 94#include <vm/vm_map.h> 95#include <vm/vm_object.h> 96#include <vm/vm_pager.h> 97#include <vm/vm_param.h> 98 99#ifdef DDB 100#ifndef KDB 101#error KDB must be enabled in order for DDB to work! 102#endif 103#include <ddb/ddb.h> 104#include <ddb/db_sym.h> 105#endif 106 107#include <net/netisr.h> 108 109#include <machine/clock.h> 110#include <machine/cpu.h> 111#include <machine/cputypes.h> 112#include <machine/intr_machdep.h> 113#include <machine/mca.h> 114#include <machine/md_var.h> 115#include <machine/metadata.h> 116#include <machine/pc/bios.h> 117#include <machine/pcb.h> 118#include <machine/proc.h> 119#include <machine/reg.h> 120#include <machine/sigframe.h> 121#include <machine/specialreg.h> 122#ifdef PERFMON 123#include <machine/perfmon.h> 124#endif 125#include <machine/tss.h> 126#ifdef SMP 127#include <machine/smp.h> 128#endif 129 130#ifdef DEV_ATPIC 131#include <amd64/isa/icu.h> 132#else 133#include <machine/apicvar.h> 134#endif 135 136#include <isa/isareg.h> 137#include <isa/rtc.h> 138 139/* Sanity check for __curthread() */ 140CTASSERT(offsetof(struct pcpu, pc_curthread) == 0); 141 142extern u_int64_t hammer_time(u_int64_t, u_int64_t); 143 144extern void printcpuinfo(void); /* XXX header file */ 145extern void identify_cpu(void); 146extern void panicifcpuunsupported(void); 147 148#define CS_SECURE(cs) (ISPL(cs) == SEL_UPL) 149#define EFL_SECURE(ef, oef) ((((ef) ^ (oef)) & ~PSL_USERCHANGE) == 0) 150 151static void cpu_startup(void *); 152static void get_fpcontext(struct thread *td, mcontext_t *mcp); 153static int set_fpcontext(struct thread *td, const mcontext_t *mcp); 154SYSINIT(cpu, SI_SUB_CPU, SI_ORDER_FIRST, cpu_startup, NULL); 155 156#ifdef DDB 157extern vm_offset_t ksym_start, ksym_end; 158#endif 159 160/* Intel ICH registers */ 161#define ICH_PMBASE 0x400 162#define ICH_SMI_EN ICH_PMBASE + 0x30 163 164int _udatasel, _ucodesel, _ucode32sel, _ufssel, _ugssel; 165 166int cold = 1; 167 168long Maxmem = 0; 169long realmem = 0; 170 171/* 172 * The number of PHYSMAP entries must be one less than the number of 173 * PHYSSEG entries because the PHYSMAP entry that spans the largest 174 * physical address that is accessible by ISA DMA is split into two 175 * PHYSSEG entries. 176 */ 177#define PHYSMAP_SIZE (2 * (VM_PHYSSEG_MAX - 1)) 178 179vm_paddr_t phys_avail[PHYSMAP_SIZE + 2]; 180vm_paddr_t dump_avail[PHYSMAP_SIZE + 2]; 181 182/* must be 2 less so 0 0 can signal end of chunks */ 183#define PHYS_AVAIL_ARRAY_END ((sizeof(phys_avail) / sizeof(phys_avail[0])) - 2) 184#define DUMP_AVAIL_ARRAY_END ((sizeof(dump_avail) / sizeof(dump_avail[0])) - 2) 185 186struct kva_md_info kmi; 187 188static struct trapframe proc0_tf; 189struct region_descriptor r_gdt, r_idt; 190 191struct pcpu __pcpu[MAXCPU]; 192 193struct mtx icu_lock; 194 195struct mem_range_softc mem_range_softc; 196 197struct mtx dt_lock; /* lock for GDT and LDT */ 198 199static void 200cpu_startup(dummy) 201 void *dummy; 202{ 203 uintmax_t memsize; 204 char *sysenv; 205 206 /* 207 * On MacBooks, we need to disallow the legacy USB circuit to 208 * generate an SMI# because this can cause several problems, 209 * namely: incorrect CPU frequency detection and failure to 210 * start the APs. 211 * We do this by disabling a bit in the SMI_EN (SMI Control and 212 * Enable register) of the Intel ICH LPC Interface Bridge. 213 */ 214 sysenv = getenv("smbios.system.product"); 215 if (sysenv != NULL) { 216 if (strncmp(sysenv, "MacBook1,1", 10) == 0 || 217 strncmp(sysenv, "MacBook3,1", 10) == 0 || 218 strncmp(sysenv, "MacBookPro1,1", 13) == 0 || 219 strncmp(sysenv, "MacBookPro1,2", 13) == 0 || 220 strncmp(sysenv, "MacBookPro3,1", 13) == 0 || 221 strncmp(sysenv, "Macmini1,1", 10) == 0) { 222 if (bootverbose) 223 printf("Disabling LEGACY_USB_EN bit on " 224 "Intel ICH.\n"); 225 outl(ICH_SMI_EN, inl(ICH_SMI_EN) & ~0x8); 226 } 227 freeenv(sysenv); 228 } 229 230 /* 231 * Good {morning,afternoon,evening,night}. 232 */ 233 startrtclock(); 234 printcpuinfo(); 235 panicifcpuunsupported(); 236#ifdef PERFMON 237 perfmon_init(); 238#endif 239 realmem = Maxmem; 240 241 /* 242 * Display physical memory if SMBIOS reports reasonable amount. 243 */ 244 memsize = 0; 245 sysenv = getenv("smbios.memory.enabled"); 246 if (sysenv != NULL) { 247 memsize = (uintmax_t)strtoul(sysenv, (char **)NULL, 10) << 10; 248 freeenv(sysenv); 249 } 250 if (memsize < ptoa((uintmax_t)cnt.v_free_count)) 251 memsize = ptoa((uintmax_t)Maxmem); 252 printf("real memory = %ju (%ju MB)\n", memsize, memsize >> 20); 253 254 /* 255 * Display any holes after the first chunk of extended memory. 256 */ 257 if (bootverbose) { 258 int indx; 259 260 printf("Physical memory chunk(s):\n"); 261 for (indx = 0; phys_avail[indx + 1] != 0; indx += 2) { 262 vm_paddr_t size; 263 264 size = phys_avail[indx + 1] - phys_avail[indx]; 265 printf( 266 "0x%016jx - 0x%016jx, %ju bytes (%ju pages)\n", 267 (uintmax_t)phys_avail[indx], 268 (uintmax_t)phys_avail[indx + 1] - 1, 269 (uintmax_t)size, (uintmax_t)size / PAGE_SIZE); 270 } 271 } 272 273 vm_ksubmap_init(&kmi); 274 275 printf("avail memory = %ju (%ju MB)\n", 276 ptoa((uintmax_t)cnt.v_free_count), 277 ptoa((uintmax_t)cnt.v_free_count) / 1048576); 278 279 /* 280 * Set up buffers, so they can be used to read disk labels. 281 */ 282 bufinit(); 283 vm_pager_bufferinit(); 284 285 cpu_setregs(); 286 mca_init(); 287} 288 289/* 290 * Send an interrupt to process. 291 * 292 * Stack is set up to allow sigcode stored 293 * at top to call routine, followed by call 294 * to sigreturn routine below. After sigreturn 295 * resets the signal mask, the stack, and the 296 * frame pointer, it returns to the user 297 * specified pc, psl. 298 */ 299void 300sendsig(sig_t catcher, ksiginfo_t *ksi, sigset_t *mask) 301{ 302 struct sigframe sf, *sfp; 303 struct proc *p; 304 struct thread *td; 305 struct sigacts *psp; 306 char *sp; 307 struct trapframe *regs; 308 int sig; 309 int oonstack; 310 311 td = curthread; 312 p = td->td_proc; 313 PROC_LOCK_ASSERT(p, MA_OWNED); 314 sig = ksi->ksi_signo; 315 psp = p->p_sigacts; 316 mtx_assert(&psp->ps_mtx, MA_OWNED); 317 regs = td->td_frame; 318 oonstack = sigonstack(regs->tf_rsp); 319 320 /* Save user context. */ 321 bzero(&sf, sizeof(sf)); 322 sf.sf_uc.uc_sigmask = *mask; 323 sf.sf_uc.uc_stack = td->td_sigstk; 324 sf.sf_uc.uc_stack.ss_flags = (td->td_pflags & TDP_ALTSTACK) 325 ? ((oonstack) ? SS_ONSTACK : 0) : SS_DISABLE; 326 sf.sf_uc.uc_mcontext.mc_onstack = (oonstack) ? 1 : 0; 327 bcopy(regs, &sf.sf_uc.uc_mcontext.mc_rdi, sizeof(*regs)); 328 sf.sf_uc.uc_mcontext.mc_len = sizeof(sf.sf_uc.uc_mcontext); /* magic */ 329 get_fpcontext(td, &sf.sf_uc.uc_mcontext); 330 fpstate_drop(td); 331 sf.sf_uc.uc_mcontext.mc_fsbase = td->td_pcb->pcb_fsbase; 332 sf.sf_uc.uc_mcontext.mc_gsbase = td->td_pcb->pcb_gsbase; 333 334 /* Allocate space for the signal handler context. */ 335 if ((td->td_pflags & TDP_ALTSTACK) != 0 && !oonstack && 336 SIGISMEMBER(psp->ps_sigonstack, sig)) { 337 sp = td->td_sigstk.ss_sp + 338 td->td_sigstk.ss_size - sizeof(struct sigframe); 339#if defined(COMPAT_43) 340 td->td_sigstk.ss_flags |= SS_ONSTACK; 341#endif 342 } else 343 sp = (char *)regs->tf_rsp - sizeof(struct sigframe) - 128; 344 /* Align to 16 bytes. */ 345 sfp = (struct sigframe *)((unsigned long)sp & ~0xFul); 346 347 /* Translate the signal if appropriate. */ 348 if (p->p_sysent->sv_sigtbl && sig <= p->p_sysent->sv_sigsize) 349 sig = p->p_sysent->sv_sigtbl[_SIG_IDX(sig)]; 350 351 /* Build the argument list for the signal handler. */ 352 regs->tf_rdi = sig; /* arg 1 in %rdi */ 353 regs->tf_rdx = (register_t)&sfp->sf_uc; /* arg 3 in %rdx */ 354 if (SIGISMEMBER(psp->ps_siginfo, sig)) { 355 /* Signal handler installed with SA_SIGINFO. */ 356 regs->tf_rsi = (register_t)&sfp->sf_si; /* arg 2 in %rsi */ 357 sf.sf_ahu.sf_action = (__siginfohandler_t *)catcher; 358 359 /* Fill in POSIX parts */ 360 sf.sf_si = ksi->ksi_info; 361 sf.sf_si.si_signo = sig; /* maybe a translated signal */ 362 regs->tf_rcx = (register_t)ksi->ksi_addr; /* arg 4 in %rcx */ 363 } else { 364 /* Old FreeBSD-style arguments. */ 365 regs->tf_rsi = ksi->ksi_code; /* arg 2 in %rsi */ 366 regs->tf_rcx = (register_t)ksi->ksi_addr; /* arg 4 in %rcx */ 367 sf.sf_ahu.sf_handler = catcher; 368 } 369 mtx_unlock(&psp->ps_mtx); 370 PROC_UNLOCK(p); 371 372 /* 373 * Copy the sigframe out to the user's stack. 374 */ 375 if (copyout(&sf, sfp, sizeof(*sfp)) != 0) { 376#ifdef DEBUG 377 printf("process %ld has trashed its stack\n", (long)p->p_pid); 378#endif 379 PROC_LOCK(p); 380 sigexit(td, SIGILL); 381 } 382 383 regs->tf_rsp = (long)sfp; 384 regs->tf_rip = PS_STRINGS - *(p->p_sysent->sv_szsigcode); 385 regs->tf_rflags &= ~(PSL_T | PSL_D); 386 regs->tf_cs = _ucodesel; 387 regs->tf_ds = _udatasel; 388 regs->tf_es = _udatasel; 389 regs->tf_fs = _ufssel; 390 regs->tf_gs = _ugssel; 391 regs->tf_flags = TF_HASSEGS; 392 td->td_pcb->pcb_full_iret = 1; 393 PROC_LOCK(p); 394 mtx_lock(&psp->ps_mtx); 395} 396 397/* 398 * System call to cleanup state after a signal 399 * has been taken. Reset signal mask and 400 * stack state from context left by sendsig (above). 401 * Return to previous pc and psl as specified by 402 * context left by sendsig. Check carefully to 403 * make sure that the user has not modified the 404 * state to gain improper privileges. 405 * 406 * MPSAFE 407 */ 408int 409sigreturn(td, uap) 410 struct thread *td; 411 struct sigreturn_args /* { 412 const struct __ucontext *sigcntxp; 413 } */ *uap; 414{ 415 ucontext_t uc; 416 struct proc *p = td->td_proc; 417 struct trapframe *regs; 418 ucontext_t *ucp; 419 long rflags; 420 int cs, error, ret; 421 ksiginfo_t ksi; 422 423 error = copyin(uap->sigcntxp, &uc, sizeof(uc)); 424 if (error != 0) { 425 printf("sigreturn (pid %d): copyin failed\n", p->p_pid); 426 return (error); 427 } 428 ucp = &uc; 429 if ((ucp->uc_mcontext.mc_flags & ~_MC_FLAG_MASK) != 0) { 430 printf("sigreturn (pid %d): mc_flags %x\n", p->p_pid, 431 ucp->uc_mcontext.mc_flags); 432 return (EINVAL); 433 } 434 regs = td->td_frame; 435 rflags = ucp->uc_mcontext.mc_rflags; 436 /* 437 * Don't allow users to change privileged or reserved flags. 438 */ 439 /* 440 * XXX do allow users to change the privileged flag PSL_RF. 441 * The cpu sets PSL_RF in tf_rflags for faults. Debuggers 442 * should sometimes set it there too. tf_rflags is kept in 443 * the signal context during signal handling and there is no 444 * other place to remember it, so the PSL_RF bit may be 445 * corrupted by the signal handler without us knowing. 446 * Corruption of the PSL_RF bit at worst causes one more or 447 * one less debugger trap, so allowing it is fairly harmless. 448 */ 449 if (!EFL_SECURE(rflags & ~PSL_RF, regs->tf_rflags & ~PSL_RF)) { 450 printf("sigreturn (pid %d): rflags = 0x%lx\n", p->p_pid, 451 rflags); 452 return (EINVAL); 453 } 454 455 /* 456 * Don't allow users to load a valid privileged %cs. Let the 457 * hardware check for invalid selectors, excess privilege in 458 * other selectors, invalid %eip's and invalid %esp's. 459 */ 460 cs = ucp->uc_mcontext.mc_cs; 461 if (!CS_SECURE(cs)) { 462 printf("sigreturn (pid %d): cs = 0x%x\n", p->p_pid, cs); 463 ksiginfo_init_trap(&ksi); 464 ksi.ksi_signo = SIGBUS; 465 ksi.ksi_code = BUS_OBJERR; 466 ksi.ksi_trapno = T_PROTFLT; 467 ksi.ksi_addr = (void *)regs->tf_rip; 468 trapsignal(td, &ksi); 469 return (EINVAL); 470 } 471 472 ret = set_fpcontext(td, &ucp->uc_mcontext); 473 if (ret != 0) { 474 printf("sigreturn (pid %d): set_fpcontext\n", p->p_pid); 475 return (ret); 476 } 477 bcopy(&ucp->uc_mcontext.mc_rdi, regs, sizeof(*regs)); 478 td->td_pcb->pcb_fsbase = ucp->uc_mcontext.mc_fsbase; 479 td->td_pcb->pcb_gsbase = ucp->uc_mcontext.mc_gsbase; 480 481#if defined(COMPAT_43) 482 if (ucp->uc_mcontext.mc_onstack & 1) 483 td->td_sigstk.ss_flags |= SS_ONSTACK; 484 else 485 td->td_sigstk.ss_flags &= ~SS_ONSTACK; 486#endif 487 488 kern_sigprocmask(td, SIG_SETMASK, &ucp->uc_sigmask, NULL, 0); 489 td->td_pcb->pcb_flags |= PCB_FULLCTX; 490 td->td_pcb->pcb_full_iret = 1; 491 return (EJUSTRETURN); 492} 493 494#ifdef COMPAT_FREEBSD4 495int 496freebsd4_sigreturn(struct thread *td, struct freebsd4_sigreturn_args *uap) 497{ 498 499 return sigreturn(td, (struct sigreturn_args *)uap); 500} 501#endif 502 503 504/* 505 * Machine dependent boot() routine 506 * 507 * I haven't seen anything to put here yet 508 * Possibly some stuff might be grafted back here from boot() 509 */ 510void 511cpu_boot(int howto) 512{ 513} 514 515/* 516 * Flush the D-cache for non-DMA I/O so that the I-cache can 517 * be made coherent later. 518 */ 519void 520cpu_flush_dcache(void *ptr, size_t len) 521{ 522 /* Not applicable */ 523} 524 525/* Get current clock frequency for the given cpu id. */ 526int 527cpu_est_clockrate(int cpu_id, uint64_t *rate) 528{ 529 register_t reg; 530 uint64_t tsc1, tsc2; 531 532 if (pcpu_find(cpu_id) == NULL || rate == NULL) 533 return (EINVAL); 534 535 /* If we're booting, trust the rate calibrated moments ago. */ 536 if (cold) { 537 *rate = tsc_freq; 538 return (0); 539 } 540 541#ifdef SMP 542 /* Schedule ourselves on the indicated cpu. */ 543 thread_lock(curthread); 544 sched_bind(curthread, cpu_id); 545 thread_unlock(curthread); 546#endif 547 548 /* Calibrate by measuring a short delay. */ 549 reg = intr_disable(); 550 tsc1 = rdtsc(); 551 DELAY(1000); 552 tsc2 = rdtsc(); 553 intr_restore(reg); 554 555#ifdef SMP 556 thread_lock(curthread); 557 sched_unbind(curthread); 558 thread_unlock(curthread); 559#endif 560 561 /* 562 * Calculate the difference in readings, convert to Mhz, and 563 * subtract 0.5% of the total. Empirical testing has shown that 564 * overhead in DELAY() works out to approximately this value. 565 */ 566 tsc2 -= tsc1; 567 *rate = tsc2 * 1000 - tsc2 * 5; 568 return (0); 569} 570 571/* 572 * Shutdown the CPU as much as possible 573 */ 574void 575cpu_halt(void) 576{ 577 for (;;) 578 __asm__ ("hlt"); 579} 580 581void (*cpu_idle_hook)(void) = NULL; /* ACPI idle hook. */ 582 583static void 584cpu_idle_hlt(int busy) 585{ 586 /* 587 * we must absolutely guarentee that hlt is the next instruction 588 * after sti or we introduce a timing window. 589 */ 590 disable_intr(); 591 if (sched_runnable()) 592 enable_intr(); 593 else 594 __asm __volatile("sti; hlt"); 595} 596 597static void 598cpu_idle_acpi(int busy) 599{ 600 disable_intr(); 601 if (sched_runnable()) 602 enable_intr(); 603 else if (cpu_idle_hook) 604 cpu_idle_hook(); 605 else 606 __asm __volatile("sti; hlt"); 607} 608 609static int cpu_ident_amdc1e = 0; 610 611static int 612cpu_probe_amdc1e(void) 613{ 614 int i; 615 616 /* 617 * Forget it, if we're not using local APIC timer. 618 */ 619 if (resource_disabled("apic", 0) || 620 (resource_int_value("apic", 0, "clock", &i) == 0 && i == 0)) 621 return (0); 622 623 /* 624 * Detect the presence of C1E capability mostly on latest 625 * dual-cores (or future) k8 family. 626 */ 627 if (cpu_vendor_id == CPU_VENDOR_AMD && 628 (cpu_id & 0x00000f00) == 0x00000f00 && 629 (cpu_id & 0x0fff0000) >= 0x00040000) { 630 cpu_ident_amdc1e = 1; 631 return (1); 632 } 633 634 return (0); 635} 636 637/* 638 * C1E renders the local APIC timer dead, so we disable it by 639 * reading the Interrupt Pending Message register and clearing 640 * both C1eOnCmpHalt (bit 28) and SmiOnCmpHalt (bit 27). 641 * 642 * Reference: 643 * "BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh Processors" 644 * #32559 revision 3.00+ 645 */ 646#define MSR_AMDK8_IPM 0xc0010055 647#define AMDK8_SMIONCMPHALT (1ULL << 27) 648#define AMDK8_C1EONCMPHALT (1ULL << 28) 649#define AMDK8_CMPHALT (AMDK8_SMIONCMPHALT | AMDK8_C1EONCMPHALT) 650 651static void 652cpu_idle_amdc1e(int busy) 653{ 654 655 disable_intr(); 656 if (sched_runnable()) 657 enable_intr(); 658 else { 659 uint64_t msr; 660 661 msr = rdmsr(MSR_AMDK8_IPM); 662 if (msr & AMDK8_CMPHALT) 663 wrmsr(MSR_AMDK8_IPM, msr & ~AMDK8_CMPHALT); 664 665 if (cpu_idle_hook) 666 cpu_idle_hook(); 667 else 668 __asm __volatile("sti; hlt"); 669 } 670} 671 672static void 673cpu_idle_spin(int busy) 674{ 675 return; 676} 677 678void (*cpu_idle_fn)(int) = cpu_idle_acpi; 679 680void 681cpu_idle(int busy) 682{ 683#ifdef SMP 684 if (mp_grab_cpu_hlt()) 685 return; 686#endif 687 cpu_idle_fn(busy); 688} 689 690/* 691 * mwait cpu power states. Lower 4 bits are sub-states. 692 */ 693#define MWAIT_C0 0xf0 694#define MWAIT_C1 0x00 695#define MWAIT_C2 0x10 696#define MWAIT_C3 0x20 697#define MWAIT_C4 0x30 698 699#define MWAIT_DISABLED 0x0 700#define MWAIT_WOKEN 0x1 701#define MWAIT_WAITING 0x2 702 703static void 704cpu_idle_mwait(int busy) 705{ 706 int *mwait; 707 708 mwait = (int *)PCPU_PTR(monitorbuf); 709 *mwait = MWAIT_WAITING; 710 if (sched_runnable()) 711 return; 712 cpu_monitor(mwait, 0, 0); 713 if (*mwait == MWAIT_WAITING) 714 cpu_mwait(0, MWAIT_C1); 715} 716 717static void 718cpu_idle_mwait_hlt(int busy) 719{ 720 int *mwait; 721 722 mwait = (int *)PCPU_PTR(monitorbuf); 723 if (busy == 0) { 724 *mwait = MWAIT_DISABLED; 725 cpu_idle_hlt(busy); 726 return; 727 } 728 *mwait = MWAIT_WAITING; 729 if (sched_runnable()) 730 return; 731 cpu_monitor(mwait, 0, 0); 732 if (*mwait == MWAIT_WAITING) 733 cpu_mwait(0, MWAIT_C1); 734} 735 736int 737cpu_idle_wakeup(int cpu) 738{ 739 struct pcpu *pcpu; 740 int *mwait; 741 742 if (cpu_idle_fn == cpu_idle_spin) 743 return (1); 744 if (cpu_idle_fn != cpu_idle_mwait && cpu_idle_fn != cpu_idle_mwait_hlt) 745 return (0); 746 pcpu = pcpu_find(cpu); 747 mwait = (int *)pcpu->pc_monitorbuf; 748 /* 749 * This doesn't need to be atomic since missing the race will 750 * simply result in unnecessary IPIs. 751 */ 752 if (cpu_idle_fn == cpu_idle_mwait_hlt && *mwait == MWAIT_DISABLED) 753 return (0); 754 *mwait = MWAIT_WOKEN; 755 756 return (1); 757} 758 759/* 760 * Ordered by speed/power consumption. 761 */ 762struct { 763 void *id_fn; 764 char *id_name; 765} idle_tbl[] = { 766 { cpu_idle_spin, "spin" }, 767 { cpu_idle_mwait, "mwait" }, 768 { cpu_idle_mwait_hlt, "mwait_hlt" }, 769 { cpu_idle_amdc1e, "amdc1e" }, 770 { cpu_idle_hlt, "hlt" }, 771 { cpu_idle_acpi, "acpi" }, 772 { NULL, NULL } 773}; 774 775static int 776idle_sysctl_available(SYSCTL_HANDLER_ARGS) 777{ 778 char *avail, *p; 779 int error; 780 int i; 781 782 avail = malloc(256, M_TEMP, M_WAITOK); 783 p = avail; 784 for (i = 0; idle_tbl[i].id_name != NULL; i++) { 785 if (strstr(idle_tbl[i].id_name, "mwait") && 786 (cpu_feature2 & CPUID2_MON) == 0) 787 continue; 788 if (strcmp(idle_tbl[i].id_name, "amdc1e") == 0 && 789 cpu_ident_amdc1e == 0) 790 continue; 791 p += sprintf(p, "%s, ", idle_tbl[i].id_name); 792 } 793 error = sysctl_handle_string(oidp, avail, 0, req); 794 free(avail, M_TEMP); 795 return (error); 796} 797 798static int 799idle_sysctl(SYSCTL_HANDLER_ARGS) 800{ 801 char buf[16]; 802 int error; 803 char *p; 804 int i; 805 806 p = "unknown"; 807 for (i = 0; idle_tbl[i].id_name != NULL; i++) { 808 if (idle_tbl[i].id_fn == cpu_idle_fn) { 809 p = idle_tbl[i].id_name; 810 break; 811 } 812 } 813 strncpy(buf, p, sizeof(buf)); 814 error = sysctl_handle_string(oidp, buf, sizeof(buf), req); 815 if (error != 0 || req->newptr == NULL) 816 return (error); 817 for (i = 0; idle_tbl[i].id_name != NULL; i++) { 818 if (strstr(idle_tbl[i].id_name, "mwait") && 819 (cpu_feature2 & CPUID2_MON) == 0) 820 continue; 821 if (strcmp(idle_tbl[i].id_name, "amdc1e") == 0 && 822 cpu_ident_amdc1e == 0) 823 continue; 824 if (strcmp(idle_tbl[i].id_name, buf)) 825 continue; 826 cpu_idle_fn = idle_tbl[i].id_fn; 827 return (0); 828 } 829 return (EINVAL); 830} 831 832SYSCTL_PROC(_machdep, OID_AUTO, idle_available, CTLTYPE_STRING | CTLFLAG_RD, 833 0, 0, idle_sysctl_available, "A", "list of available idle functions"); 834 835SYSCTL_PROC(_machdep, OID_AUTO, idle, CTLTYPE_STRING | CTLFLAG_RW, 0, 0, 836 idle_sysctl, "A", "currently selected idle function"); 837 838/* 839 * Reset registers to default values on exec. 840 */ 841void 842exec_setregs(td, entry, stack, ps_strings) 843 struct thread *td; 844 u_long entry; 845 u_long stack; 846 u_long ps_strings; 847{ 848 struct trapframe *regs = td->td_frame; 849 struct pcb *pcb = td->td_pcb; 850 851 mtx_lock(&dt_lock); 852 if (td->td_proc->p_md.md_ldt != NULL) 853 user_ldt_free(td); 854 else 855 mtx_unlock(&dt_lock); 856 857 pcb->pcb_fsbase = 0; 858 pcb->pcb_gsbase = 0; 859 pcb->pcb_flags &= ~(PCB_32BIT | PCB_GS32BIT); 860 pcb->pcb_initial_fpucw = __INITIAL_FPUCW__; 861 pcb->pcb_full_iret = 1; 862 863 bzero((char *)regs, sizeof(struct trapframe)); 864 regs->tf_rip = entry; 865 regs->tf_rsp = ((stack - 8) & ~0xFul) + 8; 866 regs->tf_rdi = stack; /* argv */ 867 regs->tf_rflags = PSL_USER | (regs->tf_rflags & PSL_T); 868 regs->tf_ss = _udatasel; 869 regs->tf_cs = _ucodesel; 870 regs->tf_ds = _udatasel; 871 regs->tf_es = _udatasel; 872 regs->tf_fs = _ufssel; 873 regs->tf_gs = _ugssel; 874 regs->tf_flags = TF_HASSEGS; 875 876 /* 877 * Reset the hardware debug registers if they were in use. 878 * They won't have any meaning for the newly exec'd process. 879 */ 880 if (pcb->pcb_flags & PCB_DBREGS) { 881 pcb->pcb_dr0 = 0; 882 pcb->pcb_dr1 = 0; 883 pcb->pcb_dr2 = 0; 884 pcb->pcb_dr3 = 0; 885 pcb->pcb_dr6 = 0; 886 pcb->pcb_dr7 = 0; 887 if (pcb == PCPU_GET(curpcb)) { 888 /* 889 * Clear the debug registers on the running 890 * CPU, otherwise they will end up affecting 891 * the next process we switch to. 892 */ 893 reset_dbregs(); 894 } 895 pcb->pcb_flags &= ~PCB_DBREGS; 896 } 897 898 /* 899 * Drop the FP state if we hold it, so that the process gets a 900 * clean FP state if it uses the FPU again. 901 */ 902 fpstate_drop(td); 903} 904 905void 906cpu_setregs(void) 907{ 908 register_t cr0; 909 910 cr0 = rcr0(); 911 /* 912 * CR0_MP, CR0_NE and CR0_TS are also set by npx_probe() for the 913 * BSP. See the comments there about why we set them. 914 */ 915 cr0 |= CR0_MP | CR0_NE | CR0_TS | CR0_WP | CR0_AM; 916 load_cr0(cr0); 917} 918 919/* 920 * Initialize amd64 and configure to run kernel 921 */ 922 923/* 924 * Initialize segments & interrupt table 925 */ 926 927struct user_segment_descriptor gdt[NGDT * MAXCPU];/* global descriptor tables */ 928static struct gate_descriptor idt0[NIDT]; 929struct gate_descriptor *idt = &idt0[0]; /* interrupt descriptor table */ 930 931static char dblfault_stack[PAGE_SIZE] __aligned(16); 932 933static char nmi0_stack[PAGE_SIZE] __aligned(16); 934CTASSERT(sizeof(struct nmi_pcpu) == 16); 935 936struct amd64tss common_tss[MAXCPU]; 937 938/* 939 * Software prototypes -- in more palatable form. 940 * 941 * Keep GUFS32, GUGS32, GUCODE32 and GUDATA at the same 942 * slots as corresponding segments for i386 kernel. 943 */ 944struct soft_segment_descriptor gdt_segs[] = { 945/* GNULL_SEL 0 Null Descriptor */ 946{ .ssd_base = 0x0, 947 .ssd_limit = 0x0, 948 .ssd_type = 0, 949 .ssd_dpl = 0, 950 .ssd_p = 0, 951 .ssd_long = 0, 952 .ssd_def32 = 0, 953 .ssd_gran = 0 }, 954/* GNULL2_SEL 1 Null Descriptor */ 955{ .ssd_base = 0x0, 956 .ssd_limit = 0x0, 957 .ssd_type = 0, 958 .ssd_dpl = 0, 959 .ssd_p = 0, 960 .ssd_long = 0, 961 .ssd_def32 = 0, 962 .ssd_gran = 0 }, 963/* GUFS32_SEL 2 32 bit %gs Descriptor for user */ 964{ .ssd_base = 0x0, 965 .ssd_limit = 0xfffff, 966 .ssd_type = SDT_MEMRWA, 967 .ssd_dpl = SEL_UPL, 968 .ssd_p = 1, 969 .ssd_long = 0, 970 .ssd_def32 = 1, 971 .ssd_gran = 1 }, 972/* GUGS32_SEL 3 32 bit %fs Descriptor for user */ 973{ .ssd_base = 0x0, 974 .ssd_limit = 0xfffff, 975 .ssd_type = SDT_MEMRWA, 976 .ssd_dpl = SEL_UPL, 977 .ssd_p = 1, 978 .ssd_long = 0, 979 .ssd_def32 = 1, 980 .ssd_gran = 1 }, 981/* GCODE_SEL 4 Code Descriptor for kernel */ 982{ .ssd_base = 0x0, 983 .ssd_limit = 0xfffff, 984 .ssd_type = SDT_MEMERA, 985 .ssd_dpl = SEL_KPL, 986 .ssd_p = 1, 987 .ssd_long = 1, 988 .ssd_def32 = 0, 989 .ssd_gran = 1 }, 990/* GDATA_SEL 5 Data Descriptor for kernel */ 991{ .ssd_base = 0x0, 992 .ssd_limit = 0xfffff, 993 .ssd_type = SDT_MEMRWA, 994 .ssd_dpl = SEL_KPL, 995 .ssd_p = 1, 996 .ssd_long = 1, 997 .ssd_def32 = 0, 998 .ssd_gran = 1 }, 999/* GUCODE32_SEL 6 32 bit Code Descriptor for user */ 1000{ .ssd_base = 0x0, 1001 .ssd_limit = 0xfffff, 1002 .ssd_type = SDT_MEMERA, 1003 .ssd_dpl = SEL_UPL, 1004 .ssd_p = 1, 1005 .ssd_long = 0, 1006 .ssd_def32 = 1, 1007 .ssd_gran = 1 }, 1008/* GUDATA_SEL 7 32/64 bit Data Descriptor for user */ 1009{ .ssd_base = 0x0, 1010 .ssd_limit = 0xfffff, 1011 .ssd_type = SDT_MEMRWA, 1012 .ssd_dpl = SEL_UPL, 1013 .ssd_p = 1, 1014 .ssd_long = 0, 1015 .ssd_def32 = 1, 1016 .ssd_gran = 1 }, 1017/* GUCODE_SEL 8 64 bit Code Descriptor for user */ 1018{ .ssd_base = 0x0, 1019 .ssd_limit = 0xfffff, 1020 .ssd_type = SDT_MEMERA, 1021 .ssd_dpl = SEL_UPL, 1022 .ssd_p = 1, 1023 .ssd_long = 1, 1024 .ssd_def32 = 0, 1025 .ssd_gran = 1 }, 1026/* GPROC0_SEL 9 Proc 0 Tss Descriptor */ 1027{ .ssd_base = 0x0, 1028 .ssd_limit = sizeof(struct amd64tss) + IOPAGES * PAGE_SIZE - 1, 1029 .ssd_type = SDT_SYSTSS, 1030 .ssd_dpl = SEL_KPL, 1031 .ssd_p = 1, 1032 .ssd_long = 0, 1033 .ssd_def32 = 0, 1034 .ssd_gran = 0 }, 1035/* Actually, the TSS is a system descriptor which is double size */ 1036{ .ssd_base = 0x0, 1037 .ssd_limit = 0x0, 1038 .ssd_type = 0, 1039 .ssd_dpl = 0, 1040 .ssd_p = 0, 1041 .ssd_long = 0, 1042 .ssd_def32 = 0, 1043 .ssd_gran = 0 }, 1044/* GUSERLDT_SEL 11 LDT Descriptor */ 1045{ .ssd_base = 0x0, 1046 .ssd_limit = 0x0, 1047 .ssd_type = 0, 1048 .ssd_dpl = 0, 1049 .ssd_p = 0, 1050 .ssd_long = 0, 1051 .ssd_def32 = 0, 1052 .ssd_gran = 0 }, 1053/* GUSERLDT_SEL 12 LDT Descriptor, double size */ 1054{ .ssd_base = 0x0, 1055 .ssd_limit = 0x0, 1056 .ssd_type = 0, 1057 .ssd_dpl = 0, 1058 .ssd_p = 0, 1059 .ssd_long = 0, 1060 .ssd_def32 = 0, 1061 .ssd_gran = 0 }, 1062}; 1063 1064void 1065setidt(idx, func, typ, dpl, ist) 1066 int idx; 1067 inthand_t *func; 1068 int typ; 1069 int dpl; 1070 int ist; 1071{ 1072 struct gate_descriptor *ip; 1073 1074 ip = idt + idx; 1075 ip->gd_looffset = (uintptr_t)func; 1076 ip->gd_selector = GSEL(GCODE_SEL, SEL_KPL); 1077 ip->gd_ist = ist; 1078 ip->gd_xx = 0; 1079 ip->gd_type = typ; 1080 ip->gd_dpl = dpl; 1081 ip->gd_p = 1; 1082 ip->gd_hioffset = ((uintptr_t)func)>>16 ; 1083} 1084 1085extern inthand_t 1086 IDTVEC(div), IDTVEC(dbg), IDTVEC(nmi), IDTVEC(bpt), IDTVEC(ofl), 1087 IDTVEC(bnd), IDTVEC(ill), IDTVEC(dna), IDTVEC(fpusegm), 1088 IDTVEC(tss), IDTVEC(missing), IDTVEC(stk), IDTVEC(prot), 1089 IDTVEC(page), IDTVEC(mchk), IDTVEC(rsvd), IDTVEC(fpu), IDTVEC(align), 1090 IDTVEC(xmm), IDTVEC(dblfault), 1091 IDTVEC(fast_syscall), IDTVEC(fast_syscall32); 1092 1093#ifdef DDB 1094/* 1095 * Display the index and function name of any IDT entries that don't use 1096 * the default 'rsvd' entry point. 1097 */ 1098DB_SHOW_COMMAND(idt, db_show_idt) 1099{ 1100 struct gate_descriptor *ip; 1101 int idx; 1102 uintptr_t func; 1103 1104 ip = idt; 1105 for (idx = 0; idx < NIDT && !db_pager_quit; idx++) { 1106 func = ((long)ip->gd_hioffset << 16 | ip->gd_looffset); 1107 if (func != (uintptr_t)&IDTVEC(rsvd)) { 1108 db_printf("%3d\t", idx); 1109 db_printsym(func, DB_STGY_PROC); 1110 db_printf("\n"); 1111 } 1112 ip++; 1113 } 1114} 1115#endif 1116 1117void 1118sdtossd(sd, ssd) 1119 struct user_segment_descriptor *sd; 1120 struct soft_segment_descriptor *ssd; 1121{ 1122 1123 ssd->ssd_base = (sd->sd_hibase << 24) | sd->sd_lobase; 1124 ssd->ssd_limit = (sd->sd_hilimit << 16) | sd->sd_lolimit; 1125 ssd->ssd_type = sd->sd_type; 1126 ssd->ssd_dpl = sd->sd_dpl; 1127 ssd->ssd_p = sd->sd_p; 1128 ssd->ssd_long = sd->sd_long; 1129 ssd->ssd_def32 = sd->sd_def32; 1130 ssd->ssd_gran = sd->sd_gran; 1131} 1132 1133void 1134ssdtosd(ssd, sd) 1135 struct soft_segment_descriptor *ssd; 1136 struct user_segment_descriptor *sd; 1137{ 1138 1139 sd->sd_lobase = (ssd->ssd_base) & 0xffffff; 1140 sd->sd_hibase = (ssd->ssd_base >> 24) & 0xff; 1141 sd->sd_lolimit = (ssd->ssd_limit) & 0xffff; 1142 sd->sd_hilimit = (ssd->ssd_limit >> 16) & 0xf; 1143 sd->sd_type = ssd->ssd_type; 1144 sd->sd_dpl = ssd->ssd_dpl; 1145 sd->sd_p = ssd->ssd_p; 1146 sd->sd_long = ssd->ssd_long; 1147 sd->sd_def32 = ssd->ssd_def32; 1148 sd->sd_gran = ssd->ssd_gran; 1149} 1150 1151void 1152ssdtosyssd(ssd, sd) 1153 struct soft_segment_descriptor *ssd; 1154 struct system_segment_descriptor *sd; 1155{ 1156 1157 sd->sd_lobase = (ssd->ssd_base) & 0xffffff; 1158 sd->sd_hibase = (ssd->ssd_base >> 24) & 0xfffffffffful; 1159 sd->sd_lolimit = (ssd->ssd_limit) & 0xffff; 1160 sd->sd_hilimit = (ssd->ssd_limit >> 16) & 0xf; 1161 sd->sd_type = ssd->ssd_type; 1162 sd->sd_dpl = ssd->ssd_dpl; 1163 sd->sd_p = ssd->ssd_p; 1164 sd->sd_gran = ssd->ssd_gran; 1165} 1166 1167#if !defined(DEV_ATPIC) && defined(DEV_ISA) 1168#include <isa/isavar.h> 1169#include <isa/isareg.h> 1170/* 1171 * Return a bitmap of the current interrupt requests. This is 8259-specific 1172 * and is only suitable for use at probe time. 1173 * This is only here to pacify sio. It is NOT FATAL if this doesn't work. 1174 * It shouldn't be here. There should probably be an APIC centric 1175 * implementation in the apic driver code, if at all. 1176 */ 1177intrmask_t 1178isa_irq_pending(void) 1179{ 1180 u_char irr1; 1181 u_char irr2; 1182 1183 irr1 = inb(IO_ICU1); 1184 irr2 = inb(IO_ICU2); 1185 return ((irr2 << 8) | irr1); 1186} 1187#endif 1188 1189u_int basemem; 1190 1191static int 1192add_smap_entry(struct bios_smap *smap, vm_paddr_t *physmap, int *physmap_idxp) 1193{ 1194 int i, insert_idx, physmap_idx; 1195 1196 physmap_idx = *physmap_idxp; 1197 1198 if (boothowto & RB_VERBOSE) 1199 printf("SMAP type=%02x base=%016lx len=%016lx\n", 1200 smap->type, smap->base, smap->length); 1201 1202 if (smap->type != SMAP_TYPE_MEMORY) 1203 return (1); 1204 1205 if (smap->length == 0) 1206 return (0); 1207 1208 /* 1209 * Find insertion point while checking for overlap. Start off by 1210 * assuming the new entry will be added to the end. 1211 */ 1212 insert_idx = physmap_idx + 2; 1213 for (i = 0; i <= physmap_idx; i += 2) { 1214 if (smap->base < physmap[i + 1]) { 1215 if (smap->base + smap->length <= physmap[i]) { 1216 insert_idx = i; 1217 break; 1218 } 1219 if (boothowto & RB_VERBOSE) 1220 printf( 1221 "Overlapping memory regions, ignoring second region\n"); 1222 return (1); 1223 } 1224 } 1225 1226 /* See if we can prepend to the next entry. */ 1227 if (insert_idx <= physmap_idx && 1228 smap->base + smap->length == physmap[insert_idx]) { 1229 physmap[insert_idx] = smap->base; 1230 return (1); 1231 } 1232 1233 /* See if we can append to the previous entry. */ 1234 if (insert_idx > 0 && smap->base == physmap[insert_idx - 1]) { 1235 physmap[insert_idx - 1] += smap->length; 1236 return (1); 1237 } 1238 1239 physmap_idx += 2; 1240 *physmap_idxp = physmap_idx; 1241 if (physmap_idx == PHYSMAP_SIZE) { 1242 printf( 1243 "Too many segments in the physical address map, giving up\n"); 1244 return (0); 1245 } 1246 1247 /* 1248 * Move the last 'N' entries down to make room for the new 1249 * entry if needed. 1250 */ 1251 for (i = physmap_idx; i > insert_idx; i -= 2) { 1252 physmap[i] = physmap[i - 2]; 1253 physmap[i + 1] = physmap[i - 1]; 1254 } 1255 1256 /* Insert the new entry. */ 1257 physmap[insert_idx] = smap->base; 1258 physmap[insert_idx + 1] = smap->base + smap->length; 1259 return (1); 1260} 1261 1262/* 1263 * Populate the (physmap) array with base/bound pairs describing the 1264 * available physical memory in the system, then test this memory and 1265 * build the phys_avail array describing the actually-available memory. 1266 * 1267 * If we cannot accurately determine the physical memory map, then use 1268 * value from the 0xE801 call, and failing that, the RTC. 1269 * 1270 * Total memory size may be set by the kernel environment variable 1271 * hw.physmem or the compile-time define MAXMEM. 1272 * 1273 * XXX first should be vm_paddr_t. 1274 */ 1275static void 1276getmemsize(caddr_t kmdp, u_int64_t first) 1277{ 1278 int i, off, physmap_idx, pa_indx, da_indx; 1279 vm_paddr_t pa, physmap[PHYSMAP_SIZE]; 1280 u_long physmem_tunable; 1281 pt_entry_t *pte; 1282 struct bios_smap *smapbase, *smap, *smapend; 1283 u_int32_t smapsize; 1284 quad_t dcons_addr, dcons_size; 1285 1286 bzero(physmap, sizeof(physmap)); 1287 basemem = 0; 1288 physmap_idx = 0; 1289 1290 /* 1291 * get memory map from INT 15:E820, kindly supplied by the loader. 1292 * 1293 * subr_module.c says: 1294 * "Consumer may safely assume that size value precedes data." 1295 * ie: an int32_t immediately precedes smap. 1296 */ 1297 smapbase = (struct bios_smap *)preload_search_info(kmdp, 1298 MODINFO_METADATA | MODINFOMD_SMAP); 1299 if (smapbase == NULL) 1300 panic("No BIOS smap info from loader!"); 1301 1302 smapsize = *((u_int32_t *)smapbase - 1); 1303 smapend = (struct bios_smap *)((uintptr_t)smapbase + smapsize); 1304 1305 for (smap = smapbase; smap < smapend; smap++) 1306 if (!add_smap_entry(smap, physmap, &physmap_idx)) 1307 break; 1308 1309 /* 1310 * Find the 'base memory' segment for SMP 1311 */ 1312 basemem = 0; 1313 for (i = 0; i <= physmap_idx; i += 2) { 1314 if (physmap[i] == 0x00000000) { 1315 basemem = physmap[i + 1] / 1024; 1316 break; 1317 } 1318 } 1319 if (basemem == 0) 1320 panic("BIOS smap did not include a basemem segment!"); 1321 1322#ifdef SMP 1323 /* make hole for AP bootstrap code */ 1324 physmap[1] = mp_bootaddress(physmap[1] / 1024); 1325#endif 1326 1327 /* 1328 * Maxmem isn't the "maximum memory", it's one larger than the 1329 * highest page of the physical address space. It should be 1330 * called something like "Maxphyspage". We may adjust this 1331 * based on ``hw.physmem'' and the results of the memory test. 1332 */ 1333 Maxmem = atop(physmap[physmap_idx + 1]); 1334 1335#ifdef MAXMEM 1336 Maxmem = MAXMEM / 4; 1337#endif 1338 1339 if (TUNABLE_ULONG_FETCH("hw.physmem", &physmem_tunable)) 1340 Maxmem = atop(physmem_tunable); 1341 1342 /* 1343 * Don't allow MAXMEM or hw.physmem to extend the amount of memory 1344 * in the system. 1345 */ 1346 if (Maxmem > atop(physmap[physmap_idx + 1])) 1347 Maxmem = atop(physmap[physmap_idx + 1]); 1348 1349 if (atop(physmap[physmap_idx + 1]) != Maxmem && 1350 (boothowto & RB_VERBOSE)) 1351 printf("Physical memory use set to %ldK\n", Maxmem * 4); 1352 1353 /* call pmap initialization to make new kernel address space */ 1354 pmap_bootstrap(&first); 1355 1356 /* 1357 * Size up each available chunk of physical memory. 1358 */ 1359 physmap[0] = PAGE_SIZE; /* mask off page 0 */ 1360 pa_indx = 0; 1361 da_indx = 1; 1362 phys_avail[pa_indx++] = physmap[0]; 1363 phys_avail[pa_indx] = physmap[0]; 1364 dump_avail[da_indx] = physmap[0]; 1365 pte = CMAP1; 1366 1367 /* 1368 * Get dcons buffer address 1369 */ 1370 if (getenv_quad("dcons.addr", &dcons_addr) == 0 || 1371 getenv_quad("dcons.size", &dcons_size) == 0) 1372 dcons_addr = 0; 1373 1374 /* 1375 * physmap is in bytes, so when converting to page boundaries, 1376 * round up the start address and round down the end address. 1377 */ 1378 for (i = 0; i <= physmap_idx; i += 2) { 1379 vm_paddr_t end; 1380 1381 end = ptoa((vm_paddr_t)Maxmem); 1382 if (physmap[i + 1] < end) 1383 end = trunc_page(physmap[i + 1]); 1384 for (pa = round_page(physmap[i]); pa < end; pa += PAGE_SIZE) { 1385 int tmp, page_bad, full; 1386 int *ptr = (int *)CADDR1; 1387 1388 full = FALSE; 1389 /* 1390 * block out kernel memory as not available. 1391 */ 1392 if (pa >= 0x100000 && pa < first) 1393 goto do_dump_avail; 1394 1395 /* 1396 * block out dcons buffer 1397 */ 1398 if (dcons_addr > 0 1399 && pa >= trunc_page(dcons_addr) 1400 && pa < dcons_addr + dcons_size) 1401 goto do_dump_avail; 1402 1403 page_bad = FALSE; 1404 1405 /* 1406 * map page into kernel: valid, read/write,non-cacheable 1407 */ 1408 *pte = pa | PG_V | PG_RW | PG_N; 1409 invltlb(); 1410 1411 tmp = *(int *)ptr; 1412 /* 1413 * Test for alternating 1's and 0's 1414 */ 1415 *(volatile int *)ptr = 0xaaaaaaaa; 1416 if (*(volatile int *)ptr != 0xaaaaaaaa) 1417 page_bad = TRUE; 1418 /* 1419 * Test for alternating 0's and 1's 1420 */ 1421 *(volatile int *)ptr = 0x55555555; 1422 if (*(volatile int *)ptr != 0x55555555) 1423 page_bad = TRUE; 1424 /* 1425 * Test for all 1's 1426 */ 1427 *(volatile int *)ptr = 0xffffffff; 1428 if (*(volatile int *)ptr != 0xffffffff) 1429 page_bad = TRUE; 1430 /* 1431 * Test for all 0's 1432 */ 1433 *(volatile int *)ptr = 0x0; 1434 if (*(volatile int *)ptr != 0x0) 1435 page_bad = TRUE; 1436 /* 1437 * Restore original value. 1438 */ 1439 *(int *)ptr = tmp; 1440 1441 /* 1442 * Adjust array of valid/good pages. 1443 */ 1444 if (page_bad == TRUE) 1445 continue; 1446 /* 1447 * If this good page is a continuation of the 1448 * previous set of good pages, then just increase 1449 * the end pointer. Otherwise start a new chunk. 1450 * Note that "end" points one higher than end, 1451 * making the range >= start and < end. 1452 * If we're also doing a speculative memory 1453 * test and we at or past the end, bump up Maxmem 1454 * so that we keep going. The first bad page 1455 * will terminate the loop. 1456 */ 1457 if (phys_avail[pa_indx] == pa) { 1458 phys_avail[pa_indx] += PAGE_SIZE; 1459 } else { 1460 pa_indx++; 1461 if (pa_indx == PHYS_AVAIL_ARRAY_END) { 1462 printf( 1463 "Too many holes in the physical address space, giving up\n"); 1464 pa_indx--; 1465 full = TRUE; 1466 goto do_dump_avail; 1467 } 1468 phys_avail[pa_indx++] = pa; /* start */ 1469 phys_avail[pa_indx] = pa + PAGE_SIZE; /* end */ 1470 } 1471 physmem++; 1472do_dump_avail: 1473 if (dump_avail[da_indx] == pa) { 1474 dump_avail[da_indx] += PAGE_SIZE; 1475 } else { 1476 da_indx++; 1477 if (da_indx == DUMP_AVAIL_ARRAY_END) { 1478 da_indx--; 1479 goto do_next; 1480 } 1481 dump_avail[da_indx++] = pa; /* start */ 1482 dump_avail[da_indx] = pa + PAGE_SIZE; /* end */ 1483 } 1484do_next: 1485 if (full) 1486 break; 1487 } 1488 } 1489 *pte = 0; 1490 invltlb(); 1491 1492 /* 1493 * XXX 1494 * The last chunk must contain at least one page plus the message 1495 * buffer to avoid complicating other code (message buffer address 1496 * calculation, etc.). 1497 */ 1498 while (phys_avail[pa_indx - 1] + PAGE_SIZE + 1499 round_page(MSGBUF_SIZE) >= phys_avail[pa_indx]) { 1500 physmem -= atop(phys_avail[pa_indx] - phys_avail[pa_indx - 1]); 1501 phys_avail[pa_indx--] = 0; 1502 phys_avail[pa_indx--] = 0; 1503 } 1504 1505 Maxmem = atop(phys_avail[pa_indx]); 1506 1507 /* Trim off space for the message buffer. */ 1508 phys_avail[pa_indx] -= round_page(MSGBUF_SIZE); 1509 1510 /* Map the message buffer. */ 1511 for (off = 0; off < round_page(MSGBUF_SIZE); off += PAGE_SIZE) 1512 pmap_kenter((vm_offset_t)msgbufp + off, phys_avail[pa_indx] + 1513 off); 1514} 1515 1516u_int64_t 1517hammer_time(u_int64_t modulep, u_int64_t physfree) 1518{ 1519 caddr_t kmdp; 1520 int gsel_tss, x; 1521 struct pcpu *pc; 1522 struct nmi_pcpu *np; 1523 u_int64_t msr; 1524 char *env; 1525 1526 thread0.td_kstack = physfree + KERNBASE; 1527 bzero((void *)thread0.td_kstack, KSTACK_PAGES * PAGE_SIZE); 1528 physfree += KSTACK_PAGES * PAGE_SIZE; 1529 thread0.td_pcb = (struct pcb *) 1530 (thread0.td_kstack + KSTACK_PAGES * PAGE_SIZE) - 1; 1531 1532 /* 1533 * This may be done better later if it gets more high level 1534 * components in it. If so just link td->td_proc here. 1535 */ 1536 proc_linkup0(&proc0, &thread0); 1537 1538 preload_metadata = (caddr_t)(uintptr_t)(modulep + KERNBASE); 1539 preload_bootstrap_relocate(KERNBASE); 1540 kmdp = preload_search_by_type("elf kernel"); 1541 if (kmdp == NULL) 1542 kmdp = preload_search_by_type("elf64 kernel"); 1543 boothowto = MD_FETCH(kmdp, MODINFOMD_HOWTO, int); 1544 kern_envp = MD_FETCH(kmdp, MODINFOMD_ENVP, char *) + KERNBASE; 1545#ifdef DDB 1546 ksym_start = MD_FETCH(kmdp, MODINFOMD_SSYM, uintptr_t); 1547 ksym_end = MD_FETCH(kmdp, MODINFOMD_ESYM, uintptr_t); 1548#endif 1549 1550 /* Init basic tunables, hz etc */ 1551 init_param1(); 1552 1553 /* 1554 * make gdt memory segments 1555 */ 1556 for (x = 0; x < NGDT; x++) { 1557 if (x != GPROC0_SEL && x != (GPROC0_SEL + 1) && 1558 x != GUSERLDT_SEL && x != (GUSERLDT_SEL) + 1) 1559 ssdtosd(&gdt_segs[x], &gdt[x]); 1560 } 1561 gdt_segs[GPROC0_SEL].ssd_base = (uintptr_t)&common_tss[0]; 1562 ssdtosyssd(&gdt_segs[GPROC0_SEL], 1563 (struct system_segment_descriptor *)&gdt[GPROC0_SEL]); 1564 1565 r_gdt.rd_limit = NGDT * sizeof(gdt[0]) - 1; 1566 r_gdt.rd_base = (long) gdt; 1567 lgdt(&r_gdt); 1568 pc = &__pcpu[0]; 1569 1570 wrmsr(MSR_FSBASE, 0); /* User value */ 1571 wrmsr(MSR_GSBASE, (u_int64_t)pc); 1572 wrmsr(MSR_KGSBASE, 0); /* User value while in the kernel */ 1573 1574 pcpu_init(pc, 0, sizeof(struct pcpu)); 1575 dpcpu_init((void *)(physfree + KERNBASE), 0); 1576 physfree += DPCPU_SIZE; 1577 PCPU_SET(prvspace, pc); 1578 PCPU_SET(curthread, &thread0); 1579 PCPU_SET(curpcb, thread0.td_pcb); 1580 PCPU_SET(tssp, &common_tss[0]); 1581 PCPU_SET(commontssp, &common_tss[0]); 1582 PCPU_SET(tss, (struct system_segment_descriptor *)&gdt[GPROC0_SEL]); 1583 PCPU_SET(ldt, (struct system_segment_descriptor *)&gdt[GUSERLDT_SEL]); 1584 PCPU_SET(fs32p, &gdt[GUFS32_SEL]); 1585 PCPU_SET(gs32p, &gdt[GUGS32_SEL]); 1586 1587 /* 1588 * Initialize mutexes. 1589 * 1590 * icu_lock: in order to allow an interrupt to occur in a critical 1591 * section, to set pcpu->ipending (etc...) properly, we 1592 * must be able to get the icu lock, so it can't be 1593 * under witness. 1594 */ 1595 mutex_init(); 1596 mtx_init(&icu_lock, "icu", NULL, MTX_SPIN | MTX_NOWITNESS); 1597 mtx_init(&dt_lock, "descriptor tables", NULL, MTX_DEF); 1598 1599 /* exceptions */ 1600 for (x = 0; x < NIDT; x++) 1601 setidt(x, &IDTVEC(rsvd), SDT_SYSIGT, SEL_KPL, 0); 1602 setidt(IDT_DE, &IDTVEC(div), SDT_SYSIGT, SEL_KPL, 0); 1603 setidt(IDT_DB, &IDTVEC(dbg), SDT_SYSIGT, SEL_KPL, 0); 1604 setidt(IDT_NMI, &IDTVEC(nmi), SDT_SYSIGT, SEL_KPL, 2); 1605 setidt(IDT_BP, &IDTVEC(bpt), SDT_SYSIGT, SEL_UPL, 0); 1606 setidt(IDT_OF, &IDTVEC(ofl), SDT_SYSIGT, SEL_KPL, 0); 1607 setidt(IDT_BR, &IDTVEC(bnd), SDT_SYSIGT, SEL_KPL, 0); 1608 setidt(IDT_UD, &IDTVEC(ill), SDT_SYSIGT, SEL_KPL, 0); 1609 setidt(IDT_NM, &IDTVEC(dna), SDT_SYSIGT, SEL_KPL, 0); 1610 setidt(IDT_DF, &IDTVEC(dblfault), SDT_SYSIGT, SEL_KPL, 1); 1611 setidt(IDT_FPUGP, &IDTVEC(fpusegm), SDT_SYSIGT, SEL_KPL, 0); 1612 setidt(IDT_TS, &IDTVEC(tss), SDT_SYSIGT, SEL_KPL, 0); 1613 setidt(IDT_NP, &IDTVEC(missing), SDT_SYSIGT, SEL_KPL, 0); 1614 setidt(IDT_SS, &IDTVEC(stk), SDT_SYSIGT, SEL_KPL, 0); 1615 setidt(IDT_GP, &IDTVEC(prot), SDT_SYSIGT, SEL_KPL, 0); 1616 setidt(IDT_PF, &IDTVEC(page), SDT_SYSIGT, SEL_KPL, 0); 1617 setidt(IDT_MF, &IDTVEC(fpu), SDT_SYSIGT, SEL_KPL, 0); 1618 setidt(IDT_AC, &IDTVEC(align), SDT_SYSIGT, SEL_KPL, 0); 1619 setidt(IDT_MC, &IDTVEC(mchk), SDT_SYSIGT, SEL_KPL, 0); 1620 setidt(IDT_XF, &IDTVEC(xmm), SDT_SYSIGT, SEL_KPL, 0); 1621 1622 r_idt.rd_limit = sizeof(idt0) - 1; 1623 r_idt.rd_base = (long) idt; 1624 lidt(&r_idt); 1625 1626 /* 1627 * Initialize the i8254 before the console so that console 1628 * initialization can use DELAY(). 1629 */ 1630 i8254_init(); 1631 1632 /* 1633 * Initialize the console before we print anything out. 1634 */ 1635 cninit(); 1636 1637#ifdef DEV_ISA 1638#ifdef DEV_ATPIC 1639 elcr_probe(); 1640 atpic_startup(); 1641#else 1642 /* Reset and mask the atpics and leave them shut down. */ 1643 atpic_reset(); 1644 1645 /* 1646 * Point the ICU spurious interrupt vectors at the APIC spurious 1647 * interrupt handler. 1648 */ 1649 setidt(IDT_IO_INTS + 7, IDTVEC(spuriousint), SDT_SYSIGT, SEL_KPL, 0); 1650 setidt(IDT_IO_INTS + 15, IDTVEC(spuriousint), SDT_SYSIGT, SEL_KPL, 0); 1651#endif 1652#else 1653#error "have you forgotten the isa device?"; 1654#endif 1655 1656 kdb_init(); 1657 1658#ifdef KDB 1659 if (boothowto & RB_KDB) 1660 kdb_enter(KDB_WHY_BOOTFLAGS, 1661 "Boot flags requested debugger"); 1662#endif 1663 1664 identify_cpu(); /* Final stage of CPU initialization */ 1665 initializecpu(); /* Initialize CPU registers */ 1666 initializecpucache(); 1667 1668 /* make an initial tss so cpu can get interrupt stack on syscall! */ 1669 common_tss[0].tss_rsp0 = thread0.td_kstack + \ 1670 KSTACK_PAGES * PAGE_SIZE - sizeof(struct pcb); 1671 /* Ensure the stack is aligned to 16 bytes */ 1672 common_tss[0].tss_rsp0 &= ~0xFul; 1673 PCPU_SET(rsp0, common_tss[0].tss_rsp0); 1674 1675 /* doublefault stack space, runs on ist1 */ 1676 common_tss[0].tss_ist1 = (long)&dblfault_stack[sizeof(dblfault_stack)]; 1677 1678 /* 1679 * NMI stack, runs on ist2. The pcpu pointer is stored just 1680 * above the start of the ist2 stack. 1681 */ 1682 np = ((struct nmi_pcpu *) &nmi0_stack[sizeof(nmi0_stack)]) - 1; 1683 np->np_pcpu = (register_t) pc; 1684 common_tss[0].tss_ist2 = (long) np; 1685 1686 /* Set the IO permission bitmap (empty due to tss seg limit) */ 1687 common_tss[0].tss_iobase = sizeof(struct amd64tss) + 1688 IOPAGES * PAGE_SIZE; 1689 1690 gsel_tss = GSEL(GPROC0_SEL, SEL_KPL); 1691 ltr(gsel_tss); 1692 1693 /* Set up the fast syscall stuff */ 1694 msr = rdmsr(MSR_EFER) | EFER_SCE; 1695 wrmsr(MSR_EFER, msr); 1696 wrmsr(MSR_LSTAR, (u_int64_t)IDTVEC(fast_syscall)); 1697 wrmsr(MSR_CSTAR, (u_int64_t)IDTVEC(fast_syscall32)); 1698 msr = ((u_int64_t)GSEL(GCODE_SEL, SEL_KPL) << 32) | 1699 ((u_int64_t)GSEL(GUCODE32_SEL, SEL_UPL) << 48); 1700 wrmsr(MSR_STAR, msr); 1701 wrmsr(MSR_SF_MASK, PSL_NT|PSL_T|PSL_I|PSL_C|PSL_D); 1702 1703 getmemsize(kmdp, physfree); 1704 init_param2(physmem); 1705 1706 /* now running on new page tables, configured,and u/iom is accessible */ 1707 1708 msgbufinit(msgbufp, MSGBUF_SIZE); 1709 fpuinit(); 1710 1711 /* transfer to user mode */ 1712 1713 _ucodesel = GSEL(GUCODE_SEL, SEL_UPL); 1714 _udatasel = GSEL(GUDATA_SEL, SEL_UPL); 1715 _ucode32sel = GSEL(GUCODE32_SEL, SEL_UPL); 1716 _ufssel = GSEL(GUFS32_SEL, SEL_UPL); 1717 _ugssel = GSEL(GUGS32_SEL, SEL_UPL); 1718 1719 load_ds(_udatasel); 1720 load_es(_udatasel); 1721 load_fs(_ufssel); 1722 1723 /* setup proc 0's pcb */ 1724 thread0.td_pcb->pcb_flags = 0; 1725 thread0.td_pcb->pcb_cr3 = KPML4phys; 1726 thread0.td_frame = &proc0_tf; 1727 1728 env = getenv("kernelname"); 1729 if (env != NULL) 1730 strlcpy(kernelname, env, sizeof(kernelname)); 1731 1732#ifdef XENHVM 1733 if (inw(0x10) == 0x49d2) { 1734 if (bootverbose) 1735 printf("Xen detected: disabling emulated block and network devices\n"); 1736 outw(0x10, 3); 1737 } 1738#endif 1739 1740 if (cpu_probe_amdc1e()) 1741 cpu_idle_fn = cpu_idle_amdc1e; 1742 1743 /* Location of kernel stack for locore */ 1744 return ((u_int64_t)thread0.td_pcb); 1745} 1746 1747void 1748cpu_pcpu_init(struct pcpu *pcpu, int cpuid, size_t size) 1749{ 1750 1751 pcpu->pc_acpi_id = 0xffffffff; 1752} 1753 1754void 1755spinlock_enter(void) 1756{ 1757 struct thread *td; 1758 1759 td = curthread; 1760 if (td->td_md.md_spinlock_count == 0) 1761 td->td_md.md_saved_flags = intr_disable(); 1762 td->td_md.md_spinlock_count++; 1763 critical_enter(); 1764} 1765 1766void 1767spinlock_exit(void) 1768{ 1769 struct thread *td; 1770 1771 td = curthread; 1772 critical_exit(); 1773 td->td_md.md_spinlock_count--; 1774 if (td->td_md.md_spinlock_count == 0) 1775 intr_restore(td->td_md.md_saved_flags); 1776} 1777 1778/* 1779 * Construct a PCB from a trapframe. This is called from kdb_trap() where 1780 * we want to start a backtrace from the function that caused us to enter 1781 * the debugger. We have the context in the trapframe, but base the trace 1782 * on the PCB. The PCB doesn't have to be perfect, as long as it contains 1783 * enough for a backtrace. 1784 */ 1785void 1786makectx(struct trapframe *tf, struct pcb *pcb) 1787{ 1788 1789 pcb->pcb_r12 = tf->tf_r12; 1790 pcb->pcb_r13 = tf->tf_r13; 1791 pcb->pcb_r14 = tf->tf_r14; 1792 pcb->pcb_r15 = tf->tf_r15; 1793 pcb->pcb_rbp = tf->tf_rbp; 1794 pcb->pcb_rbx = tf->tf_rbx; 1795 pcb->pcb_rip = tf->tf_rip; 1796 pcb->pcb_rsp = (ISPL(tf->tf_cs)) ? tf->tf_rsp : (long)(tf + 1) - 8; 1797} 1798 1799int 1800ptrace_set_pc(struct thread *td, unsigned long addr) 1801{ 1802 td->td_frame->tf_rip = addr; 1803 return (0); 1804} 1805 1806int 1807ptrace_single_step(struct thread *td) 1808{ 1809 td->td_frame->tf_rflags |= PSL_T; 1810 return (0); 1811} 1812 1813int 1814ptrace_clear_single_step(struct thread *td) 1815{ 1816 td->td_frame->tf_rflags &= ~PSL_T; 1817 return (0); 1818} 1819 1820int 1821fill_regs(struct thread *td, struct reg *regs) 1822{ 1823 struct trapframe *tp; 1824 1825 tp = td->td_frame; 1826 regs->r_r15 = tp->tf_r15; 1827 regs->r_r14 = tp->tf_r14; 1828 regs->r_r13 = tp->tf_r13; 1829 regs->r_r12 = tp->tf_r12; 1830 regs->r_r11 = tp->tf_r11; 1831 regs->r_r10 = tp->tf_r10; 1832 regs->r_r9 = tp->tf_r9; 1833 regs->r_r8 = tp->tf_r8; 1834 regs->r_rdi = tp->tf_rdi; 1835 regs->r_rsi = tp->tf_rsi; 1836 regs->r_rbp = tp->tf_rbp; 1837 regs->r_rbx = tp->tf_rbx; 1838 regs->r_rdx = tp->tf_rdx; 1839 regs->r_rcx = tp->tf_rcx; 1840 regs->r_rax = tp->tf_rax; 1841 regs->r_rip = tp->tf_rip; 1842 regs->r_cs = tp->tf_cs; 1843 regs->r_rflags = tp->tf_rflags; 1844 regs->r_rsp = tp->tf_rsp; 1845 regs->r_ss = tp->tf_ss; 1846 if (tp->tf_flags & TF_HASSEGS) { 1847 regs->r_ds = tp->tf_ds; 1848 regs->r_es = tp->tf_es; 1849 regs->r_fs = tp->tf_fs; 1850 regs->r_gs = tp->tf_gs; 1851 } else { 1852 regs->r_ds = 0; 1853 regs->r_es = 0; 1854 regs->r_fs = 0; 1855 regs->r_gs = 0; 1856 } 1857 return (0); 1858} 1859 1860int 1861set_regs(struct thread *td, struct reg *regs) 1862{ 1863 struct trapframe *tp; 1864 register_t rflags; 1865 1866 tp = td->td_frame; 1867 rflags = regs->r_rflags & 0xffffffff; 1868 if (!EFL_SECURE(rflags, tp->tf_rflags) || !CS_SECURE(regs->r_cs)) 1869 return (EINVAL); 1870 tp->tf_r15 = regs->r_r15; 1871 tp->tf_r14 = regs->r_r14; 1872 tp->tf_r13 = regs->r_r13; 1873 tp->tf_r12 = regs->r_r12; 1874 tp->tf_r11 = regs->r_r11; 1875 tp->tf_r10 = regs->r_r10; 1876 tp->tf_r9 = regs->r_r9; 1877 tp->tf_r8 = regs->r_r8; 1878 tp->tf_rdi = regs->r_rdi; 1879 tp->tf_rsi = regs->r_rsi; 1880 tp->tf_rbp = regs->r_rbp; 1881 tp->tf_rbx = regs->r_rbx; 1882 tp->tf_rdx = regs->r_rdx; 1883 tp->tf_rcx = regs->r_rcx; 1884 tp->tf_rax = regs->r_rax; 1885 tp->tf_rip = regs->r_rip; 1886 tp->tf_cs = regs->r_cs; 1887 tp->tf_rflags = rflags; 1888 tp->tf_rsp = regs->r_rsp; 1889 tp->tf_ss = regs->r_ss; 1890 if (0) { /* XXXKIB */ 1891 tp->tf_ds = regs->r_ds; 1892 tp->tf_es = regs->r_es; 1893 tp->tf_fs = regs->r_fs; 1894 tp->tf_gs = regs->r_gs; 1895 tp->tf_flags = TF_HASSEGS; 1896 } 1897 td->td_pcb->pcb_flags |= PCB_FULLCTX; 1898 return (0); 1899} 1900 1901/* XXX check all this stuff! */ 1902/* externalize from sv_xmm */ 1903static void 1904fill_fpregs_xmm(struct savefpu *sv_xmm, struct fpreg *fpregs) 1905{ 1906 struct envxmm *penv_fpreg = (struct envxmm *)&fpregs->fpr_env; 1907 struct envxmm *penv_xmm = &sv_xmm->sv_env; 1908 int i; 1909 1910 /* pcb -> fpregs */ 1911 bzero(fpregs, sizeof(*fpregs)); 1912 1913 /* FPU control/status */ 1914 penv_fpreg->en_cw = penv_xmm->en_cw; 1915 penv_fpreg->en_sw = penv_xmm->en_sw; 1916 penv_fpreg->en_tw = penv_xmm->en_tw; 1917 penv_fpreg->en_opcode = penv_xmm->en_opcode; 1918 penv_fpreg->en_rip = penv_xmm->en_rip; 1919 penv_fpreg->en_rdp = penv_xmm->en_rdp; 1920 penv_fpreg->en_mxcsr = penv_xmm->en_mxcsr; 1921 penv_fpreg->en_mxcsr_mask = penv_xmm->en_mxcsr_mask; 1922 1923 /* FPU registers */ 1924 for (i = 0; i < 8; ++i) 1925 bcopy(sv_xmm->sv_fp[i].fp_acc.fp_bytes, fpregs->fpr_acc[i], 10); 1926 1927 /* SSE registers */ 1928 for (i = 0; i < 16; ++i) 1929 bcopy(sv_xmm->sv_xmm[i].xmm_bytes, fpregs->fpr_xacc[i], 16); 1930} 1931 1932/* internalize from fpregs into sv_xmm */ 1933static void 1934set_fpregs_xmm(struct fpreg *fpregs, struct savefpu *sv_xmm) 1935{ 1936 struct envxmm *penv_xmm = &sv_xmm->sv_env; 1937 struct envxmm *penv_fpreg = (struct envxmm *)&fpregs->fpr_env; 1938 int i; 1939 1940 /* fpregs -> pcb */ 1941 /* FPU control/status */ 1942 penv_xmm->en_cw = penv_fpreg->en_cw; 1943 penv_xmm->en_sw = penv_fpreg->en_sw; 1944 penv_xmm->en_tw = penv_fpreg->en_tw; 1945 penv_xmm->en_opcode = penv_fpreg->en_opcode; 1946 penv_xmm->en_rip = penv_fpreg->en_rip; 1947 penv_xmm->en_rdp = penv_fpreg->en_rdp; 1948 penv_xmm->en_mxcsr = penv_fpreg->en_mxcsr; 1949 penv_xmm->en_mxcsr_mask = penv_fpreg->en_mxcsr_mask & cpu_mxcsr_mask; 1950 1951 /* FPU registers */ 1952 for (i = 0; i < 8; ++i) 1953 bcopy(fpregs->fpr_acc[i], sv_xmm->sv_fp[i].fp_acc.fp_bytes, 10); 1954 1955 /* SSE registers */ 1956 for (i = 0; i < 16; ++i) 1957 bcopy(fpregs->fpr_xacc[i], sv_xmm->sv_xmm[i].xmm_bytes, 16); 1958} 1959 1960/* externalize from td->pcb */ 1961int 1962fill_fpregs(struct thread *td, struct fpreg *fpregs) 1963{ 1964 1965 fill_fpregs_xmm(&td->td_pcb->pcb_save, fpregs); 1966 return (0); 1967} 1968 1969/* internalize to td->pcb */ 1970int 1971set_fpregs(struct thread *td, struct fpreg *fpregs) 1972{ 1973 1974 set_fpregs_xmm(fpregs, &td->td_pcb->pcb_save); 1975 return (0); 1976} 1977 1978/* 1979 * Get machine context. 1980 */ 1981int 1982get_mcontext(struct thread *td, mcontext_t *mcp, int flags) 1983{ 1984 struct trapframe *tp; 1985 1986 tp = td->td_frame; 1987 PROC_LOCK(curthread->td_proc); 1988 mcp->mc_onstack = sigonstack(tp->tf_rsp); 1989 PROC_UNLOCK(curthread->td_proc); 1990 mcp->mc_r15 = tp->tf_r15; 1991 mcp->mc_r14 = tp->tf_r14; 1992 mcp->mc_r13 = tp->tf_r13; 1993 mcp->mc_r12 = tp->tf_r12; 1994 mcp->mc_r11 = tp->tf_r11; 1995 mcp->mc_r10 = tp->tf_r10; 1996 mcp->mc_r9 = tp->tf_r9; 1997 mcp->mc_r8 = tp->tf_r8; 1998 mcp->mc_rdi = tp->tf_rdi; 1999 mcp->mc_rsi = tp->tf_rsi; 2000 mcp->mc_rbp = tp->tf_rbp; 2001 mcp->mc_rbx = tp->tf_rbx; 2002 mcp->mc_rcx = tp->tf_rcx; 2003 mcp->mc_rflags = tp->tf_rflags; 2004 if (flags & GET_MC_CLEAR_RET) { 2005 mcp->mc_rax = 0; 2006 mcp->mc_rdx = 0; 2007 mcp->mc_rflags &= ~PSL_C; 2008 } else { 2009 mcp->mc_rax = tp->tf_rax; 2010 mcp->mc_rdx = tp->tf_rdx; 2011 } 2012 mcp->mc_rip = tp->tf_rip; 2013 mcp->mc_cs = tp->tf_cs; 2014 mcp->mc_rsp = tp->tf_rsp; 2015 mcp->mc_ss = tp->tf_ss; 2016 mcp->mc_ds = tp->tf_ds; 2017 mcp->mc_es = tp->tf_es; 2018 mcp->mc_fs = tp->tf_fs; 2019 mcp->mc_gs = tp->tf_gs; 2020 mcp->mc_flags = tp->tf_flags; 2021 mcp->mc_len = sizeof(*mcp); 2022 get_fpcontext(td, mcp); 2023 mcp->mc_fsbase = td->td_pcb->pcb_fsbase; 2024 mcp->mc_gsbase = td->td_pcb->pcb_gsbase; 2025 return (0); 2026} 2027 2028/* 2029 * Set machine context. 2030 * 2031 * However, we don't set any but the user modifiable flags, and we won't 2032 * touch the cs selector. 2033 */ 2034int 2035set_mcontext(struct thread *td, const mcontext_t *mcp) 2036{ 2037 struct trapframe *tp; 2038 long rflags; 2039 int ret; 2040 2041 tp = td->td_frame; 2042 if (mcp->mc_len != sizeof(*mcp) || 2043 (mcp->mc_flags & ~_MC_FLAG_MASK) != 0) 2044 return (EINVAL); 2045 rflags = (mcp->mc_rflags & PSL_USERCHANGE) | 2046 (tp->tf_rflags & ~PSL_USERCHANGE); 2047 ret = set_fpcontext(td, mcp); 2048 if (ret != 0) 2049 return (ret); 2050 tp->tf_r15 = mcp->mc_r15; 2051 tp->tf_r14 = mcp->mc_r14; 2052 tp->tf_r13 = mcp->mc_r13; 2053 tp->tf_r12 = mcp->mc_r12; 2054 tp->tf_r11 = mcp->mc_r11; 2055 tp->tf_r10 = mcp->mc_r10; 2056 tp->tf_r9 = mcp->mc_r9; 2057 tp->tf_r8 = mcp->mc_r8; 2058 tp->tf_rdi = mcp->mc_rdi; 2059 tp->tf_rsi = mcp->mc_rsi; 2060 tp->tf_rbp = mcp->mc_rbp; 2061 tp->tf_rbx = mcp->mc_rbx; 2062 tp->tf_rdx = mcp->mc_rdx; 2063 tp->tf_rcx = mcp->mc_rcx; 2064 tp->tf_rax = mcp->mc_rax; 2065 tp->tf_rip = mcp->mc_rip; 2066 tp->tf_rflags = rflags; 2067 tp->tf_rsp = mcp->mc_rsp; 2068 tp->tf_ss = mcp->mc_ss; 2069 tp->tf_flags = mcp->mc_flags; 2070 if (tp->tf_flags & TF_HASSEGS) { 2071 tp->tf_ds = mcp->mc_ds; 2072 tp->tf_es = mcp->mc_es; 2073 tp->tf_fs = mcp->mc_fs; 2074 tp->tf_gs = mcp->mc_gs; 2075 } 2076 if (mcp->mc_flags & _MC_HASBASES) { 2077 td->td_pcb->pcb_fsbase = mcp->mc_fsbase; 2078 td->td_pcb->pcb_gsbase = mcp->mc_gsbase; 2079 } 2080 td->td_pcb->pcb_flags |= PCB_FULLCTX; 2081 td->td_pcb->pcb_full_iret = 1; 2082 return (0); 2083} 2084 2085static void 2086get_fpcontext(struct thread *td, mcontext_t *mcp) 2087{ 2088 2089 mcp->mc_ownedfp = fpugetregs(td, (struct savefpu *)&mcp->mc_fpstate); 2090 mcp->mc_fpformat = fpuformat(); 2091} 2092 2093static int 2094set_fpcontext(struct thread *td, const mcontext_t *mcp) 2095{ 2096 struct savefpu *fpstate; 2097 2098 if (mcp->mc_fpformat == _MC_FPFMT_NODEV) 2099 return (0); 2100 else if (mcp->mc_fpformat != _MC_FPFMT_XMM) 2101 return (EINVAL); 2102 else if (mcp->mc_ownedfp == _MC_FPOWNED_NONE) 2103 /* We don't care what state is left in the FPU or PCB. */ 2104 fpstate_drop(td); 2105 else if (mcp->mc_ownedfp == _MC_FPOWNED_FPU || 2106 mcp->mc_ownedfp == _MC_FPOWNED_PCB) { 2107 /* 2108 * XXX we violate the dubious requirement that fpusetregs() 2109 * be called with interrupts disabled. 2110 * XXX obsolete on trap-16 systems? 2111 */ 2112 fpstate = (struct savefpu *)&mcp->mc_fpstate; 2113 fpstate->sv_env.en_mxcsr &= cpu_mxcsr_mask; 2114 fpusetregs(td, fpstate); 2115 } else 2116 return (EINVAL); 2117 return (0); 2118} 2119 2120void 2121fpstate_drop(struct thread *td) 2122{ 2123 register_t s; 2124 2125 s = intr_disable(); 2126 if (PCPU_GET(fpcurthread) == td) 2127 fpudrop(); 2128 /* 2129 * XXX force a full drop of the fpu. The above only drops it if we 2130 * owned it. 2131 * 2132 * XXX I don't much like fpugetregs()'s semantics of doing a full 2133 * drop. Dropping only to the pcb matches fnsave's behaviour. 2134 * We only need to drop to !PCB_INITDONE in sendsig(). But 2135 * sendsig() is the only caller of fpugetregs()... perhaps we just 2136 * have too many layers. 2137 */ 2138 curthread->td_pcb->pcb_flags &= ~PCB_FPUINITDONE; 2139 intr_restore(s); 2140} 2141 2142int 2143fill_dbregs(struct thread *td, struct dbreg *dbregs) 2144{ 2145 struct pcb *pcb; 2146 2147 if (td == NULL) { 2148 dbregs->dr[0] = rdr0(); 2149 dbregs->dr[1] = rdr1(); 2150 dbregs->dr[2] = rdr2(); 2151 dbregs->dr[3] = rdr3(); 2152 dbregs->dr[6] = rdr6(); 2153 dbregs->dr[7] = rdr7(); 2154 } else { 2155 pcb = td->td_pcb; 2156 dbregs->dr[0] = pcb->pcb_dr0; 2157 dbregs->dr[1] = pcb->pcb_dr1; 2158 dbregs->dr[2] = pcb->pcb_dr2; 2159 dbregs->dr[3] = pcb->pcb_dr3; 2160 dbregs->dr[6] = pcb->pcb_dr6; 2161 dbregs->dr[7] = pcb->pcb_dr7; 2162 } 2163 dbregs->dr[4] = 0; 2164 dbregs->dr[5] = 0; 2165 dbregs->dr[8] = 0; 2166 dbregs->dr[9] = 0; 2167 dbregs->dr[10] = 0; 2168 dbregs->dr[11] = 0; 2169 dbregs->dr[12] = 0; 2170 dbregs->dr[13] = 0; 2171 dbregs->dr[14] = 0; 2172 dbregs->dr[15] = 0; 2173 return (0); 2174} 2175 2176int 2177set_dbregs(struct thread *td, struct dbreg *dbregs) 2178{ 2179 struct pcb *pcb; 2180 int i; 2181 2182 if (td == NULL) { 2183 load_dr0(dbregs->dr[0]); 2184 load_dr1(dbregs->dr[1]); 2185 load_dr2(dbregs->dr[2]); 2186 load_dr3(dbregs->dr[3]); 2187 load_dr6(dbregs->dr[6]); 2188 load_dr7(dbregs->dr[7]); 2189 } else { 2190 /* 2191 * Don't let an illegal value for dr7 get set. Specifically, 2192 * check for undefined settings. Setting these bit patterns 2193 * result in undefined behaviour and can lead to an unexpected 2194 * TRCTRAP or a general protection fault right here. 2195 * Upper bits of dr6 and dr7 must not be set 2196 */ 2197 for (i = 0; i < 4; i++) { 2198 if (DBREG_DR7_ACCESS(dbregs->dr[7], i) == 0x02) 2199 return (EINVAL); 2200 if (td->td_frame->tf_cs == _ucode32sel && 2201 DBREG_DR7_LEN(dbregs->dr[7], i) == DBREG_DR7_LEN_8) 2202 return (EINVAL); 2203 } 2204 if ((dbregs->dr[6] & 0xffffffff00000000ul) != 0 || 2205 (dbregs->dr[7] & 0xffffffff00000000ul) != 0) 2206 return (EINVAL); 2207 2208 pcb = td->td_pcb; 2209 2210 /* 2211 * Don't let a process set a breakpoint that is not within the 2212 * process's address space. If a process could do this, it 2213 * could halt the system by setting a breakpoint in the kernel 2214 * (if ddb was enabled). Thus, we need to check to make sure 2215 * that no breakpoints are being enabled for addresses outside 2216 * process's address space. 2217 * 2218 * XXX - what about when the watched area of the user's 2219 * address space is written into from within the kernel 2220 * ... wouldn't that still cause a breakpoint to be generated 2221 * from within kernel mode? 2222 */ 2223 2224 if (DBREG_DR7_ENABLED(dbregs->dr[7], 0)) { 2225 /* dr0 is enabled */ 2226 if (dbregs->dr[0] >= VM_MAXUSER_ADDRESS) 2227 return (EINVAL); 2228 } 2229 if (DBREG_DR7_ENABLED(dbregs->dr[7], 1)) { 2230 /* dr1 is enabled */ 2231 if (dbregs->dr[1] >= VM_MAXUSER_ADDRESS) 2232 return (EINVAL); 2233 } 2234 if (DBREG_DR7_ENABLED(dbregs->dr[7], 2)) { 2235 /* dr2 is enabled */ 2236 if (dbregs->dr[2] >= VM_MAXUSER_ADDRESS) 2237 return (EINVAL); 2238 } 2239 if (DBREG_DR7_ENABLED(dbregs->dr[7], 3)) { 2240 /* dr3 is enabled */ 2241 if (dbregs->dr[3] >= VM_MAXUSER_ADDRESS) 2242 return (EINVAL); 2243 } 2244 2245 pcb->pcb_dr0 = dbregs->dr[0]; 2246 pcb->pcb_dr1 = dbregs->dr[1]; 2247 pcb->pcb_dr2 = dbregs->dr[2]; 2248 pcb->pcb_dr3 = dbregs->dr[3]; 2249 pcb->pcb_dr6 = dbregs->dr[6]; 2250 pcb->pcb_dr7 = dbregs->dr[7]; 2251 2252 pcb->pcb_flags |= PCB_DBREGS; 2253 } 2254 2255 return (0); 2256} 2257 2258void 2259reset_dbregs(void) 2260{ 2261 2262 load_dr7(0); /* Turn off the control bits first */ 2263 load_dr0(0); 2264 load_dr1(0); 2265 load_dr2(0); 2266 load_dr3(0); 2267 load_dr6(0); 2268} 2269 2270/* 2271 * Return > 0 if a hardware breakpoint has been hit, and the 2272 * breakpoint was in user space. Return 0, otherwise. 2273 */ 2274int 2275user_dbreg_trap(void) 2276{ 2277 u_int64_t dr7, dr6; /* debug registers dr6 and dr7 */ 2278 u_int64_t bp; /* breakpoint bits extracted from dr6 */ 2279 int nbp; /* number of breakpoints that triggered */ 2280 caddr_t addr[4]; /* breakpoint addresses */ 2281 int i; 2282 2283 dr7 = rdr7(); 2284 if ((dr7 & 0x000000ff) == 0) { 2285 /* 2286 * all GE and LE bits in the dr7 register are zero, 2287 * thus the trap couldn't have been caused by the 2288 * hardware debug registers 2289 */ 2290 return 0; 2291 } 2292 2293 nbp = 0; 2294 dr6 = rdr6(); 2295 bp = dr6 & 0x0000000f; 2296 2297 if (!bp) { 2298 /* 2299 * None of the breakpoint bits are set meaning this 2300 * trap was not caused by any of the debug registers 2301 */ 2302 return 0; 2303 } 2304 2305 /* 2306 * at least one of the breakpoints were hit, check to see 2307 * which ones and if any of them are user space addresses 2308 */ 2309 2310 if (bp & 0x01) { 2311 addr[nbp++] = (caddr_t)rdr0(); 2312 } 2313 if (bp & 0x02) { 2314 addr[nbp++] = (caddr_t)rdr1(); 2315 } 2316 if (bp & 0x04) { 2317 addr[nbp++] = (caddr_t)rdr2(); 2318 } 2319 if (bp & 0x08) { 2320 addr[nbp++] = (caddr_t)rdr3(); 2321 } 2322 2323 for (i = 0; i < nbp; i++) { 2324 if (addr[i] < (caddr_t)VM_MAXUSER_ADDRESS) { 2325 /* 2326 * addr[i] is in user space 2327 */ 2328 return nbp; 2329 } 2330 } 2331 2332 /* 2333 * None of the breakpoints are in user space. 2334 */ 2335 return 0; 2336} 2337 2338#ifdef KDB 2339 2340/* 2341 * Provide inb() and outb() as functions. They are normally only available as 2342 * inline functions, thus cannot be called from the debugger. 2343 */ 2344 2345/* silence compiler warnings */ 2346u_char inb_(u_short); 2347void outb_(u_short, u_char); 2348 2349u_char 2350inb_(u_short port) 2351{ 2352 return inb(port); 2353} 2354 2355void 2356outb_(u_short port, u_char data) 2357{ 2358 outb(port, data); 2359} 2360 2361#endif /* KDB */ 2362