machdep.c revision 158445
1178476Sjb/*- 2178476Sjb * Copyright (c) 2003 Peter Wemm. 3178476Sjb * Copyright (c) 1992 Terrence R. Lambert. 4178476Sjb * Copyright (c) 1982, 1987, 1990 The Regents of the University of California. 5178476Sjb * All rights reserved. 6178476Sjb * 7178476Sjb * This code is derived from software contributed to Berkeley by 8178476Sjb * William Jolitz. 9178476Sjb * 10178476Sjb * Redistribution and use in source and binary forms, with or without 11178476Sjb * modification, are permitted provided that the following conditions 12178476Sjb * are met: 13178476Sjb * 1. Redistributions of source code must retain the above copyright 14178476Sjb * notice, this list of conditions and the following disclaimer. 15178476Sjb * 2. Redistributions in binary form must reproduce the above copyright 16178476Sjb * notice, this list of conditions and the following disclaimer in the 17178476Sjb * documentation and/or other materials provided with the distribution. 18178476Sjb * 3. All advertising materials mentioning features or use of this software 19178476Sjb * must display the following acknowledgement: 20178476Sjb * This product includes software developed by the University of 21178476Sjb * California, Berkeley and its contributors. 22178476Sjb * 4. Neither the name of the University nor the names of its contributors 23178476Sjb * may be used to endorse or promote products derived from this software 24178476Sjb * without specific prior written permission. 25178476Sjb * 26178476Sjb * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 27178476Sjb * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 28178476Sjb * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 29178476Sjb * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 30178476Sjb * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 31178476Sjb * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 32178476Sjb * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 33178476Sjb * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 34178476Sjb * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 35178476Sjb * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 36178476Sjb * SUCH DAMAGE. 37178476Sjb * 38178476Sjb * from: @(#)machdep.c 7.4 (Berkeley) 6/3/91 39178476Sjb */ 40178476Sjb 41178476Sjb#include <sys/cdefs.h> 42178476Sjb__FBSDID("$FreeBSD: head/sys/amd64/amd64/machdep.c 158445 2006-05-11 17:29:25Z phk $"); 43178476Sjb 44178476Sjb#include "opt_atalk.h" 45178476Sjb#include "opt_atpic.h" 46178476Sjb#include "opt_compat.h" 47178476Sjb#include "opt_cpu.h" 48178476Sjb#include "opt_ddb.h" 49178476Sjb#include "opt_inet.h" 50178476Sjb#include "opt_ipx.h" 51178476Sjb#include "opt_isa.h" 52178476Sjb#include "opt_kstack_pages.h" 53178476Sjb#include "opt_maxmem.h" 54178476Sjb#include "opt_msgbuf.h" 55178476Sjb#include "opt_perfmon.h" 56178476Sjb 57178476Sjb#include <sys/param.h> 58178476Sjb#include <sys/proc.h> 59178476Sjb#include <sys/systm.h> 60178476Sjb#include <sys/bio.h> 61178476Sjb#include <sys/buf.h> 62178476Sjb#include <sys/bus.h> 63178476Sjb#include <sys/callout.h> 64178476Sjb#include <sys/cons.h> 65178476Sjb#include <sys/cpu.h> 66178476Sjb#include <sys/eventhandler.h> 67178476Sjb#include <sys/exec.h> 68178476Sjb#include <sys/imgact.h> 69178476Sjb#include <sys/kdb.h> 70178476Sjb#include <sys/kernel.h> 71178476Sjb#include <sys/ktr.h> 72178476Sjb#include <sys/linker.h> 73178476Sjb#include <sys/lock.h> 74178476Sjb#include <sys/malloc.h> 75#include <sys/memrange.h> 76#include <sys/msgbuf.h> 77#include <sys/mutex.h> 78#include <sys/pcpu.h> 79#include <sys/ptrace.h> 80#include <sys/reboot.h> 81#include <sys/sched.h> 82#include <sys/signalvar.h> 83#include <sys/sysctl.h> 84#include <sys/sysent.h> 85#include <sys/sysproto.h> 86#include <sys/ucontext.h> 87#include <sys/vmmeter.h> 88 89#include <vm/vm.h> 90#include <vm/vm_extern.h> 91#include <vm/vm_kern.h> 92#include <vm/vm_page.h> 93#include <vm/vm_map.h> 94#include <vm/vm_object.h> 95#include <vm/vm_pager.h> 96#include <vm/vm_param.h> 97 98#ifdef DDB 99#ifndef KDB 100#error KDB must be enabled in order for DDB to work! 101#endif 102#endif 103#include <ddb/ddb.h> 104 105#include <net/netisr.h> 106 107#include <machine/clock.h> 108#include <machine/cpu.h> 109#include <machine/cputypes.h> 110#include <machine/intr_machdep.h> 111#include <machine/md_var.h> 112#include <machine/metadata.h> 113#include <machine/pc/bios.h> 114#include <machine/pcb.h> 115#include <machine/proc.h> 116#include <machine/reg.h> 117#include <machine/sigframe.h> 118#include <machine/specialreg.h> 119#ifdef PERFMON 120#include <machine/perfmon.h> 121#endif 122#include <machine/tss.h> 123#ifdef SMP 124#include <machine/smp.h> 125#endif 126 127#include <dev/ic/i8259.h> 128#include <amd64/isa/icu.h> 129#include <machine/apicvar.h> 130 131#include <isa/isareg.h> 132#include <isa/rtc.h> 133 134/* Sanity check for __curthread() */ 135CTASSERT(offsetof(struct pcpu, pc_curthread) == 0); 136 137extern u_int64_t hammer_time(u_int64_t, u_int64_t); 138extern void dblfault_handler(void); 139 140extern void printcpuinfo(void); /* XXX header file */ 141extern void identify_cpu(void); 142extern void panicifcpuunsupported(void); 143 144#define CS_SECURE(cs) (ISPL(cs) == SEL_UPL) 145#define EFL_SECURE(ef, oef) ((((ef) ^ (oef)) & ~PSL_USERCHANGE) == 0) 146 147static void cpu_startup(void *); 148static void get_fpcontext(struct thread *td, mcontext_t *mcp); 149static int set_fpcontext(struct thread *td, const mcontext_t *mcp); 150SYSINIT(cpu, SI_SUB_CPU, SI_ORDER_FIRST, cpu_startup, NULL) 151 152#ifdef DDB 153extern vm_offset_t ksym_start, ksym_end; 154#endif 155 156int _udatasel, _ucodesel, _ucode32sel; 157 158int cold = 1; 159 160long Maxmem = 0; 161long realmem = 0; 162 163vm_paddr_t phys_avail[20]; 164vm_paddr_t dump_avail[20]; 165 166/* must be 2 less so 0 0 can signal end of chunks */ 167#define PHYS_AVAIL_ARRAY_END ((sizeof(phys_avail) / sizeof(phys_avail[0])) - 2) 168#define DUMP_AVAIL_ARRAY_END ((sizeof(dump_avail) / sizeof(dump_avail[0])) - 2) 169 170struct kva_md_info kmi; 171 172static struct trapframe proc0_tf; 173struct region_descriptor r_gdt, r_idt; 174 175struct pcpu __pcpu[MAXCPU]; 176 177struct mtx icu_lock; 178 179struct mem_range_softc mem_range_softc; 180 181static void 182cpu_startup(dummy) 183 void *dummy; 184{ 185 /* 186 * Good {morning,afternoon,evening,night}. 187 */ 188 startrtclock(); 189 printcpuinfo(); 190 panicifcpuunsupported(); 191#ifdef PERFMON 192 perfmon_init(); 193#endif 194 printf("usable memory = %ju (%ju MB)\n", ptoa((uintmax_t)physmem), 195 ptoa((uintmax_t)physmem) / 1048576); 196 realmem = Maxmem; 197 /* 198 * Display any holes after the first chunk of extended memory. 199 */ 200 if (bootverbose) { 201 int indx; 202 203 printf("Physical memory chunk(s):\n"); 204 for (indx = 0; phys_avail[indx + 1] != 0; indx += 2) { 205 vm_paddr_t size; 206 207 size = phys_avail[indx + 1] - phys_avail[indx]; 208 printf( 209 "0x%016jx - 0x%016jx, %ju bytes (%ju pages)\n", 210 (uintmax_t)phys_avail[indx], 211 (uintmax_t)phys_avail[indx + 1] - 1, 212 (uintmax_t)size, (uintmax_t)size / PAGE_SIZE); 213 } 214 } 215 216 vm_ksubmap_init(&kmi); 217 218 printf("avail memory = %ju (%ju MB)\n", 219 ptoa((uintmax_t)cnt.v_free_count), 220 ptoa((uintmax_t)cnt.v_free_count) / 1048576); 221 222 /* 223 * Set up buffers, so they can be used to read disk labels. 224 */ 225 bufinit(); 226 vm_pager_bufferinit(); 227 228 cpu_setregs(); 229} 230 231/* 232 * Send an interrupt to process. 233 * 234 * Stack is set up to allow sigcode stored 235 * at top to call routine, followed by kcall 236 * to sigreturn routine below. After sigreturn 237 * resets the signal mask, the stack, and the 238 * frame pointer, it returns to the user 239 * specified pc, psl. 240 */ 241void 242sendsig(sig_t catcher, ksiginfo_t *ksi, sigset_t *mask) 243{ 244 struct sigframe sf, *sfp; 245 struct proc *p; 246 struct thread *td; 247 struct sigacts *psp; 248 char *sp; 249 struct trapframe *regs; 250 int sig; 251 int oonstack; 252 253 td = curthread; 254 p = td->td_proc; 255 PROC_LOCK_ASSERT(p, MA_OWNED); 256 sig = ksi->ksi_signo; 257 psp = p->p_sigacts; 258 mtx_assert(&psp->ps_mtx, MA_OWNED); 259 regs = td->td_frame; 260 oonstack = sigonstack(regs->tf_rsp); 261 262 /* Save user context. */ 263 bzero(&sf, sizeof(sf)); 264 sf.sf_uc.uc_sigmask = *mask; 265 sf.sf_uc.uc_stack = td->td_sigstk; 266 sf.sf_uc.uc_stack.ss_flags = (td->td_pflags & TDP_ALTSTACK) 267 ? ((oonstack) ? SS_ONSTACK : 0) : SS_DISABLE; 268 sf.sf_uc.uc_mcontext.mc_onstack = (oonstack) ? 1 : 0; 269 bcopy(regs, &sf.sf_uc.uc_mcontext.mc_rdi, sizeof(*regs)); 270 sf.sf_uc.uc_mcontext.mc_len = sizeof(sf.sf_uc.uc_mcontext); /* magic */ 271 get_fpcontext(td, &sf.sf_uc.uc_mcontext); 272 fpstate_drop(td); 273 274 /* Allocate space for the signal handler context. */ 275 if ((td->td_pflags & TDP_ALTSTACK) != 0 && !oonstack && 276 SIGISMEMBER(psp->ps_sigonstack, sig)) { 277 sp = td->td_sigstk.ss_sp + 278 td->td_sigstk.ss_size - sizeof(struct sigframe); 279#if defined(COMPAT_43) 280 td->td_sigstk.ss_flags |= SS_ONSTACK; 281#endif 282 } else 283 sp = (char *)regs->tf_rsp - sizeof(struct sigframe) - 128; 284 /* Align to 16 bytes. */ 285 sfp = (struct sigframe *)((unsigned long)sp & ~0xFul); 286 287 /* Translate the signal if appropriate. */ 288 if (p->p_sysent->sv_sigtbl && sig <= p->p_sysent->sv_sigsize) 289 sig = p->p_sysent->sv_sigtbl[_SIG_IDX(sig)]; 290 291 /* Build the argument list for the signal handler. */ 292 regs->tf_rdi = sig; /* arg 1 in %rdi */ 293 regs->tf_rdx = (register_t)&sfp->sf_uc; /* arg 3 in %rdx */ 294 if (SIGISMEMBER(psp->ps_siginfo, sig)) { 295 /* Signal handler installed with SA_SIGINFO. */ 296 regs->tf_rsi = (register_t)&sfp->sf_si; /* arg 2 in %rsi */ 297 sf.sf_ahu.sf_action = (__siginfohandler_t *)catcher; 298 299 /* Fill in POSIX parts */ 300 sf.sf_si = ksi->ksi_info; 301 sf.sf_si.si_signo = sig; /* maybe a translated signal */ 302 regs->tf_rcx = (register_t)ksi->ksi_addr; /* arg 4 in %rcx */ 303 } else { 304 /* Old FreeBSD-style arguments. */ 305 regs->tf_rsi = ksi->ksi_code; /* arg 2 in %rsi */ 306 regs->tf_rcx = (register_t)ksi->ksi_addr; /* arg 4 in %rcx */ 307 sf.sf_ahu.sf_handler = catcher; 308 } 309 mtx_unlock(&psp->ps_mtx); 310 PROC_UNLOCK(p); 311 312 /* 313 * Copy the sigframe out to the user's stack. 314 */ 315 if (copyout(&sf, sfp, sizeof(*sfp)) != 0) { 316#ifdef DEBUG 317 printf("process %ld has trashed its stack\n", (long)p->p_pid); 318#endif 319 PROC_LOCK(p); 320 sigexit(td, SIGILL); 321 } 322 323 regs->tf_rsp = (long)sfp; 324 regs->tf_rip = PS_STRINGS - *(p->p_sysent->sv_szsigcode); 325 regs->tf_rflags &= ~PSL_T; 326 regs->tf_cs = _ucodesel; 327 PROC_LOCK(p); 328 mtx_lock(&psp->ps_mtx); 329} 330 331/* 332 * System call to cleanup state after a signal 333 * has been taken. Reset signal mask and 334 * stack state from context left by sendsig (above). 335 * Return to previous pc and psl as specified by 336 * context left by sendsig. Check carefully to 337 * make sure that the user has not modified the 338 * state to gain improper privileges. 339 * 340 * MPSAFE 341 */ 342int 343sigreturn(td, uap) 344 struct thread *td; 345 struct sigreturn_args /* { 346 const struct __ucontext *sigcntxp; 347 } */ *uap; 348{ 349 ucontext_t uc; 350 struct proc *p = td->td_proc; 351 struct trapframe *regs; 352 const ucontext_t *ucp; 353 long rflags; 354 int cs, error, ret; 355 ksiginfo_t ksi; 356 357 error = copyin(uap->sigcntxp, &uc, sizeof(uc)); 358 if (error != 0) 359 return (error); 360 ucp = &uc; 361 regs = td->td_frame; 362 rflags = ucp->uc_mcontext.mc_rflags; 363 /* 364 * Don't allow users to change privileged or reserved flags. 365 */ 366 /* 367 * XXX do allow users to change the privileged flag PSL_RF. 368 * The cpu sets PSL_RF in tf_rflags for faults. Debuggers 369 * should sometimes set it there too. tf_rflags is kept in 370 * the signal context during signal handling and there is no 371 * other place to remember it, so the PSL_RF bit may be 372 * corrupted by the signal handler without us knowing. 373 * Corruption of the PSL_RF bit at worst causes one more or 374 * one less debugger trap, so allowing it is fairly harmless. 375 */ 376 if (!EFL_SECURE(rflags & ~PSL_RF, regs->tf_rflags & ~PSL_RF)) { 377 printf("sigreturn: rflags = 0x%lx\n", rflags); 378 return (EINVAL); 379 } 380 381 /* 382 * Don't allow users to load a valid privileged %cs. Let the 383 * hardware check for invalid selectors, excess privilege in 384 * other selectors, invalid %eip's and invalid %esp's. 385 */ 386 cs = ucp->uc_mcontext.mc_cs; 387 if (!CS_SECURE(cs)) { 388 printf("sigreturn: cs = 0x%x\n", cs); 389 ksiginfo_init_trap(&ksi); 390 ksi.ksi_signo = SIGBUS; 391 ksi.ksi_code = BUS_OBJERR; 392 ksi.ksi_trapno = T_PROTFLT; 393 ksi.ksi_addr = (void *)regs->tf_rip; 394 trapsignal(td, &ksi); 395 return (EINVAL); 396 } 397 398 ret = set_fpcontext(td, &ucp->uc_mcontext); 399 if (ret != 0) 400 return (ret); 401 bcopy(&ucp->uc_mcontext.mc_rdi, regs, sizeof(*regs)); 402 403 PROC_LOCK(p); 404#if defined(COMPAT_43) 405 if (ucp->uc_mcontext.mc_onstack & 1) 406 td->td_sigstk.ss_flags |= SS_ONSTACK; 407 else 408 td->td_sigstk.ss_flags &= ~SS_ONSTACK; 409#endif 410 411 td->td_sigmask = ucp->uc_sigmask; 412 SIG_CANTMASK(td->td_sigmask); 413 signotify(td); 414 PROC_UNLOCK(p); 415 td->td_pcb->pcb_flags |= PCB_FULLCTX; 416 return (EJUSTRETURN); 417} 418 419#ifdef COMPAT_FREEBSD4 420int 421freebsd4_sigreturn(struct thread *td, struct freebsd4_sigreturn_args *uap) 422{ 423 424 return sigreturn(td, (struct sigreturn_args *)uap); 425} 426#endif 427 428 429/* 430 * Machine dependent boot() routine 431 * 432 * I haven't seen anything to put here yet 433 * Possibly some stuff might be grafted back here from boot() 434 */ 435void 436cpu_boot(int howto) 437{ 438} 439 440/* Get current clock frequency for the given cpu id. */ 441int 442cpu_est_clockrate(int cpu_id, uint64_t *rate) 443{ 444 register_t reg; 445 uint64_t tsc1, tsc2; 446 447 if (pcpu_find(cpu_id) == NULL || rate == NULL) 448 return (EINVAL); 449 450 /* If we're booting, trust the rate calibrated moments ago. */ 451 if (cold) { 452 *rate = tsc_freq; 453 return (0); 454 } 455 456#ifdef SMP 457 /* Schedule ourselves on the indicated cpu. */ 458 mtx_lock_spin(&sched_lock); 459 sched_bind(curthread, cpu_id); 460 mtx_unlock_spin(&sched_lock); 461#endif 462 463 /* Calibrate by measuring a short delay. */ 464 reg = intr_disable(); 465 tsc1 = rdtsc(); 466 DELAY(1000); 467 tsc2 = rdtsc(); 468 intr_restore(reg); 469 470#ifdef SMP 471 mtx_lock_spin(&sched_lock); 472 sched_unbind(curthread); 473 mtx_unlock_spin(&sched_lock); 474#endif 475 476 /* 477 * Calculate the difference in readings, convert to Mhz, and 478 * subtract 0.5% of the total. Empirical testing has shown that 479 * overhead in DELAY() works out to approximately this value. 480 */ 481 tsc2 -= tsc1; 482 *rate = tsc2 * 1000 - tsc2 * 5; 483 return (0); 484} 485 486/* 487 * Shutdown the CPU as much as possible 488 */ 489void 490cpu_halt(void) 491{ 492 for (;;) 493 __asm__ ("hlt"); 494} 495 496/* 497 * Hook to idle the CPU when possible. In the SMP case we default to 498 * off because a halted cpu will not currently pick up a new thread in the 499 * run queue until the next timer tick. If turned on this will result in 500 * approximately a 4.2% loss in real time performance in buildworld tests 501 * (but improves user and sys times oddly enough), and saves approximately 502 * 5% in power consumption on an idle machine (tests w/2xCPU 1.1GHz P3). 503 * 504 * XXX we need to have a cpu mask of idle cpus and generate an IPI or 505 * otherwise generate some sort of interrupt to wake up cpus sitting in HLT. 506 * Then we can have our cake and eat it too. 507 * 508 * XXX I'm turning it on for SMP as well by default for now. It seems to 509 * help lock contention somewhat, and this is critical for HTT. -Peter 510 */ 511static int cpu_idle_hlt = 1; 512SYSCTL_INT(_machdep, OID_AUTO, cpu_idle_hlt, CTLFLAG_RW, 513 &cpu_idle_hlt, 0, "Idle loop HLT enable"); 514 515static void 516cpu_idle_default(void) 517{ 518 /* 519 * we must absolutely guarentee that hlt is the 520 * absolute next instruction after sti or we 521 * introduce a timing window. 522 */ 523 __asm __volatile("sti; hlt"); 524} 525 526/* 527 * Note that we have to be careful here to avoid a race between checking 528 * sched_runnable() and actually halting. If we don't do this, we may waste 529 * the time between calling hlt and the next interrupt even though there 530 * is a runnable process. 531 */ 532void 533cpu_idle(void) 534{ 535 536#ifdef SMP 537 if (mp_grab_cpu_hlt()) 538 return; 539#endif 540 if (cpu_idle_hlt) { 541 disable_intr(); 542 if (sched_runnable()) 543 enable_intr(); 544 else 545 (*cpu_idle_hook)(); 546 } 547} 548 549/* Other subsystems (e.g., ACPI) can hook this later. */ 550void (*cpu_idle_hook)(void) = cpu_idle_default; 551 552/* 553 * Clear registers on exec 554 */ 555void 556exec_setregs(td, entry, stack, ps_strings) 557 struct thread *td; 558 u_long entry; 559 u_long stack; 560 u_long ps_strings; 561{ 562 struct trapframe *regs = td->td_frame; 563 struct pcb *pcb = td->td_pcb; 564 565 critical_enter(); 566 wrmsr(MSR_FSBASE, 0); 567 wrmsr(MSR_KGSBASE, 0); /* User value while we're in the kernel */ 568 pcb->pcb_fsbase = 0; 569 pcb->pcb_gsbase = 0; 570 critical_exit(); 571 load_ds(_udatasel); 572 load_es(_udatasel); 573 load_fs(_udatasel); 574 load_gs(_udatasel); 575 pcb->pcb_ds = _udatasel; 576 pcb->pcb_es = _udatasel; 577 pcb->pcb_fs = _udatasel; 578 pcb->pcb_gs = _udatasel; 579 580 bzero((char *)regs, sizeof(struct trapframe)); 581 regs->tf_rip = entry; 582 regs->tf_rsp = ((stack - 8) & ~0xFul) + 8; 583 regs->tf_rdi = stack; /* argv */ 584 regs->tf_rflags = PSL_USER | (regs->tf_rflags & PSL_T); 585 regs->tf_ss = _udatasel; 586 regs->tf_cs = _ucodesel; 587 588 /* 589 * Reset the hardware debug registers if they were in use. 590 * They won't have any meaning for the newly exec'd process. 591 */ 592 if (pcb->pcb_flags & PCB_DBREGS) { 593 pcb->pcb_dr0 = 0; 594 pcb->pcb_dr1 = 0; 595 pcb->pcb_dr2 = 0; 596 pcb->pcb_dr3 = 0; 597 pcb->pcb_dr6 = 0; 598 pcb->pcb_dr7 = 0; 599 if (pcb == PCPU_GET(curpcb)) { 600 /* 601 * Clear the debug registers on the running 602 * CPU, otherwise they will end up affecting 603 * the next process we switch to. 604 */ 605 reset_dbregs(); 606 } 607 pcb->pcb_flags &= ~PCB_DBREGS; 608 } 609 610 /* 611 * Drop the FP state if we hold it, so that the process gets a 612 * clean FP state if it uses the FPU again. 613 */ 614 fpstate_drop(td); 615} 616 617void 618cpu_setregs(void) 619{ 620 register_t cr0; 621 622 cr0 = rcr0(); 623 /* 624 * CR0_MP, CR0_NE and CR0_TS are also set by npx_probe() for the 625 * BSP. See the comments there about why we set them. 626 */ 627 cr0 |= CR0_MP | CR0_NE | CR0_TS | CR0_WP | CR0_AM; 628 load_cr0(cr0); 629} 630 631static int 632sysctl_machdep_adjkerntz(SYSCTL_HANDLER_ARGS) 633{ 634 int error; 635 error = sysctl_handle_int(oidp, oidp->oid_arg1, oidp->oid_arg2, 636 req); 637 if (!error && req->newptr) 638 resettodr(); 639 return (error); 640} 641 642SYSCTL_PROC(_machdep, OID_AUTO, adjkerntz, CTLTYPE_INT|CTLFLAG_RW, 643 &adjkerntz, 0, sysctl_machdep_adjkerntz, "I", ""); 644 645SYSCTL_INT(_machdep, OID_AUTO, disable_rtc_set, 646 CTLFLAG_RW, &disable_rtc_set, 0, ""); 647 648SYSCTL_INT(_machdep, OID_AUTO, wall_cmos_clock, 649 CTLFLAG_RW, &wall_cmos_clock, 0, ""); 650 651/* 652 * Initialize amd64 and configure to run kernel 653 */ 654 655/* 656 * Initialize segments & interrupt table 657 */ 658 659struct user_segment_descriptor gdt[NGDT * MAXCPU];/* global descriptor table */ 660static struct gate_descriptor idt0[NIDT]; 661struct gate_descriptor *idt = &idt0[0]; /* interrupt descriptor table */ 662 663static char dblfault_stack[PAGE_SIZE] __aligned(16); 664 665struct amd64tss common_tss[MAXCPU]; 666 667/* software prototypes -- in more palatable form */ 668struct soft_segment_descriptor gdt_segs[] = { 669/* GNULL_SEL 0 Null Descriptor */ 670{ 0x0, /* segment base address */ 671 0x0, /* length */ 672 0, /* segment type */ 673 0, /* segment descriptor priority level */ 674 0, /* segment descriptor present */ 675 0, /* long */ 676 0, /* default 32 vs 16 bit size */ 677 0 /* limit granularity (byte/page units)*/ }, 678/* GCODE_SEL 1 Code Descriptor for kernel */ 679{ 0x0, /* segment base address */ 680 0xfffff, /* length - all address space */ 681 SDT_MEMERA, /* segment type */ 682 SEL_KPL, /* segment descriptor priority level */ 683 1, /* segment descriptor present */ 684 1, /* long */ 685 0, /* default 32 vs 16 bit size */ 686 1 /* limit granularity (byte/page units)*/ }, 687/* GDATA_SEL 2 Data Descriptor for kernel */ 688{ 0x0, /* segment base address */ 689 0xfffff, /* length - all address space */ 690 SDT_MEMRWA, /* segment type */ 691 SEL_KPL, /* segment descriptor priority level */ 692 1, /* segment descriptor present */ 693 1, /* long */ 694 0, /* default 32 vs 16 bit size */ 695 1 /* limit granularity (byte/page units)*/ }, 696/* GUCODE32_SEL 3 32 bit Code Descriptor for user */ 697{ 0x0, /* segment base address */ 698 0xfffff, /* length - all address space */ 699 SDT_MEMERA, /* segment type */ 700 SEL_UPL, /* segment descriptor priority level */ 701 1, /* segment descriptor present */ 702 0, /* long */ 703 1, /* default 32 vs 16 bit size */ 704 1 /* limit granularity (byte/page units)*/ }, 705/* GUDATA_SEL 4 32/64 bit Data Descriptor for user */ 706{ 0x0, /* segment base address */ 707 0xfffff, /* length - all address space */ 708 SDT_MEMRWA, /* segment type */ 709 SEL_UPL, /* segment descriptor priority level */ 710 1, /* segment descriptor present */ 711 0, /* long */ 712 1, /* default 32 vs 16 bit size */ 713 1 /* limit granularity (byte/page units)*/ }, 714/* GUCODE_SEL 5 64 bit Code Descriptor for user */ 715{ 0x0, /* segment base address */ 716 0xfffff, /* length - all address space */ 717 SDT_MEMERA, /* segment type */ 718 SEL_UPL, /* segment descriptor priority level */ 719 1, /* segment descriptor present */ 720 1, /* long */ 721 0, /* default 32 vs 16 bit size */ 722 1 /* limit granularity (byte/page units)*/ }, 723/* GPROC0_SEL 6 Proc 0 Tss Descriptor */ 724{ 725 0x0, /* segment base address */ 726 sizeof(struct amd64tss)-1,/* length - all address space */ 727 SDT_SYSTSS, /* segment type */ 728 SEL_KPL, /* segment descriptor priority level */ 729 1, /* segment descriptor present */ 730 0, /* long */ 731 0, /* unused - default 32 vs 16 bit size */ 732 0 /* limit granularity (byte/page units)*/ }, 733/* Actually, the TSS is a system descriptor which is double size */ 734{ 0x0, /* segment base address */ 735 0x0, /* length */ 736 0, /* segment type */ 737 0, /* segment descriptor priority level */ 738 0, /* segment descriptor present */ 739 0, /* long */ 740 0, /* default 32 vs 16 bit size */ 741 0 /* limit granularity (byte/page units)*/ }, 742}; 743 744void 745setidt(idx, func, typ, dpl, ist) 746 int idx; 747 inthand_t *func; 748 int typ; 749 int dpl; 750 int ist; 751{ 752 struct gate_descriptor *ip; 753 754 ip = idt + idx; 755 ip->gd_looffset = (uintptr_t)func; 756 ip->gd_selector = GSEL(GCODE_SEL, SEL_KPL); 757 ip->gd_ist = ist; 758 ip->gd_xx = 0; 759 ip->gd_type = typ; 760 ip->gd_dpl = dpl; 761 ip->gd_p = 1; 762 ip->gd_hioffset = ((uintptr_t)func)>>16 ; 763} 764 765#define IDTVEC(name) __CONCAT(X,name) 766 767extern inthand_t 768 IDTVEC(div), IDTVEC(dbg), IDTVEC(nmi), IDTVEC(bpt), IDTVEC(ofl), 769 IDTVEC(bnd), IDTVEC(ill), IDTVEC(dna), IDTVEC(fpusegm), 770 IDTVEC(tss), IDTVEC(missing), IDTVEC(stk), IDTVEC(prot), 771 IDTVEC(page), IDTVEC(mchk), IDTVEC(rsvd), IDTVEC(fpu), IDTVEC(align), 772 IDTVEC(xmm), IDTVEC(dblfault), 773 IDTVEC(fast_syscall), IDTVEC(fast_syscall32); 774 775void 776sdtossd(sd, ssd) 777 struct user_segment_descriptor *sd; 778 struct soft_segment_descriptor *ssd; 779{ 780 781 ssd->ssd_base = (sd->sd_hibase << 24) | sd->sd_lobase; 782 ssd->ssd_limit = (sd->sd_hilimit << 16) | sd->sd_lolimit; 783 ssd->ssd_type = sd->sd_type; 784 ssd->ssd_dpl = sd->sd_dpl; 785 ssd->ssd_p = sd->sd_p; 786 ssd->ssd_long = sd->sd_long; 787 ssd->ssd_def32 = sd->sd_def32; 788 ssd->ssd_gran = sd->sd_gran; 789} 790 791void 792ssdtosd(ssd, sd) 793 struct soft_segment_descriptor *ssd; 794 struct user_segment_descriptor *sd; 795{ 796 797 sd->sd_lobase = (ssd->ssd_base) & 0xffffff; 798 sd->sd_hibase = (ssd->ssd_base >> 24) & 0xff; 799 sd->sd_lolimit = (ssd->ssd_limit) & 0xffff; 800 sd->sd_hilimit = (ssd->ssd_limit >> 16) & 0xf; 801 sd->sd_type = ssd->ssd_type; 802 sd->sd_dpl = ssd->ssd_dpl; 803 sd->sd_p = ssd->ssd_p; 804 sd->sd_long = ssd->ssd_long; 805 sd->sd_def32 = ssd->ssd_def32; 806 sd->sd_gran = ssd->ssd_gran; 807} 808 809void 810ssdtosyssd(ssd, sd) 811 struct soft_segment_descriptor *ssd; 812 struct system_segment_descriptor *sd; 813{ 814 815 sd->sd_lobase = (ssd->ssd_base) & 0xffffff; 816 sd->sd_hibase = (ssd->ssd_base >> 24) & 0xfffffffffful; 817 sd->sd_lolimit = (ssd->ssd_limit) & 0xffff; 818 sd->sd_hilimit = (ssd->ssd_limit >> 16) & 0xf; 819 sd->sd_type = ssd->ssd_type; 820 sd->sd_dpl = ssd->ssd_dpl; 821 sd->sd_p = ssd->ssd_p; 822 sd->sd_gran = ssd->ssd_gran; 823} 824 825#if !defined(DEV_ATPIC) && defined(DEV_ISA) 826#include <isa/isavar.h> 827u_int 828isa_irq_pending(void) 829{ 830 831 return (0); 832} 833#endif 834 835#define PHYSMAP_SIZE (2 * 20) 836 837u_int basemem; 838 839/* 840 * Populate the (physmap) array with base/bound pairs describing the 841 * available physical memory in the system, then test this memory and 842 * build the phys_avail array describing the actually-available memory. 843 * 844 * If we cannot accurately determine the physical memory map, then use 845 * value from the 0xE801 call, and failing that, the RTC. 846 * 847 * Total memory size may be set by the kernel environment variable 848 * hw.physmem or the compile-time define MAXMEM. 849 * 850 * XXX first should be vm_paddr_t. 851 */ 852static void 853getmemsize(caddr_t kmdp, u_int64_t first) 854{ 855 int i, physmap_idx, pa_indx, da_indx; 856 vm_paddr_t pa, physmap[PHYSMAP_SIZE]; 857 u_long physmem_tunable; 858 pt_entry_t *pte; 859 struct bios_smap *smapbase, *smap, *smapend; 860 u_int32_t smapsize; 861 quad_t dcons_addr, dcons_size; 862 863 bzero(physmap, sizeof(physmap)); 864 basemem = 0; 865 physmap_idx = 0; 866 867 /* 868 * get memory map from INT 15:E820, kindly supplied by the loader. 869 * 870 * subr_module.c says: 871 * "Consumer may safely assume that size value precedes data." 872 * ie: an int32_t immediately precedes smap. 873 */ 874 smapbase = (struct bios_smap *)preload_search_info(kmdp, 875 MODINFO_METADATA | MODINFOMD_SMAP); 876 if (smapbase == NULL) 877 panic("No BIOS smap info from loader!"); 878 879 smapsize = *((u_int32_t *)smapbase - 1); 880 smapend = (struct bios_smap *)((uintptr_t)smapbase + smapsize); 881 882 for (smap = smapbase; smap < smapend; smap++) { 883 if (boothowto & RB_VERBOSE) 884 printf("SMAP type=%02x base=%016lx len=%016lx\n", 885 smap->type, smap->base, smap->length); 886 887 if (smap->type != 0x01) 888 continue; 889 890 if (smap->length == 0) 891 continue; 892 893 for (i = 0; i <= physmap_idx; i += 2) { 894 if (smap->base < physmap[i + 1]) { 895 if (boothowto & RB_VERBOSE) 896 printf( 897 "Overlapping or non-montonic memory region, ignoring second region\n"); 898 continue; 899 } 900 } 901 902 if (smap->base == physmap[physmap_idx + 1]) { 903 physmap[physmap_idx + 1] += smap->length; 904 continue; 905 } 906 907 physmap_idx += 2; 908 if (physmap_idx == PHYSMAP_SIZE) { 909 printf( 910 "Too many segments in the physical address map, giving up\n"); 911 break; 912 } 913 physmap[physmap_idx] = smap->base; 914 physmap[physmap_idx + 1] = smap->base + smap->length; 915 } 916 917 /* 918 * Find the 'base memory' segment for SMP 919 */ 920 basemem = 0; 921 for (i = 0; i <= physmap_idx; i += 2) { 922 if (physmap[i] == 0x00000000) { 923 basemem = physmap[i + 1] / 1024; 924 break; 925 } 926 } 927 if (basemem == 0) 928 panic("BIOS smap did not include a basemem segment!"); 929 930#ifdef SMP 931 /* make hole for AP bootstrap code */ 932 physmap[1] = mp_bootaddress(physmap[1] / 1024); 933#endif 934 935 /* 936 * Maxmem isn't the "maximum memory", it's one larger than the 937 * highest page of the physical address space. It should be 938 * called something like "Maxphyspage". We may adjust this 939 * based on ``hw.physmem'' and the results of the memory test. 940 */ 941 Maxmem = atop(physmap[physmap_idx + 1]); 942 943#ifdef MAXMEM 944 Maxmem = MAXMEM / 4; 945#endif 946 947 if (TUNABLE_ULONG_FETCH("hw.physmem", &physmem_tunable)) 948 Maxmem = atop(physmem_tunable); 949 950 if (atop(physmap[physmap_idx + 1]) != Maxmem && 951 (boothowto & RB_VERBOSE)) 952 printf("Physical memory use set to %ldK\n", Maxmem * 4); 953 954 /* 955 * If Maxmem has been increased beyond what the system has detected, 956 * extend the last memory segment to the new limit. 957 */ 958 if (atop(physmap[physmap_idx + 1]) < Maxmem) 959 physmap[physmap_idx + 1] = ptoa((vm_paddr_t)Maxmem); 960 961 /* call pmap initialization to make new kernel address space */ 962 pmap_bootstrap(&first); 963 964 /* 965 * Size up each available chunk of physical memory. 966 */ 967 physmap[0] = PAGE_SIZE; /* mask off page 0 */ 968 pa_indx = 0; 969 da_indx = 1; 970 phys_avail[pa_indx++] = physmap[0]; 971 phys_avail[pa_indx] = physmap[0]; 972 dump_avail[da_indx] = physmap[0]; 973 pte = CMAP1; 974 975 /* 976 * Get dcons buffer address 977 */ 978 if (getenv_quad("dcons.addr", &dcons_addr) == 0 || 979 getenv_quad("dcons.size", &dcons_size) == 0) 980 dcons_addr = 0; 981 982 /* 983 * physmap is in bytes, so when converting to page boundaries, 984 * round up the start address and round down the end address. 985 */ 986 for (i = 0; i <= physmap_idx; i += 2) { 987 vm_paddr_t end; 988 989 end = ptoa((vm_paddr_t)Maxmem); 990 if (physmap[i + 1] < end) 991 end = trunc_page(physmap[i + 1]); 992 for (pa = round_page(physmap[i]); pa < end; pa += PAGE_SIZE) { 993 int tmp, page_bad, full; 994 int *ptr = (int *)CADDR1; 995 996 full = FALSE; 997 /* 998 * block out kernel memory as not available. 999 */ 1000 if (pa >= 0x100000 && pa < first) 1001 goto do_dump_avail; 1002 1003 /* 1004 * block out dcons buffer 1005 */ 1006 if (dcons_addr > 0 1007 && pa >= trunc_page(dcons_addr) 1008 && pa < dcons_addr + dcons_size) 1009 goto do_dump_avail; 1010 1011 page_bad = FALSE; 1012 1013 /* 1014 * map page into kernel: valid, read/write,non-cacheable 1015 */ 1016 *pte = pa | PG_V | PG_RW | PG_N; 1017 invltlb(); 1018 1019 tmp = *(int *)ptr; 1020 /* 1021 * Test for alternating 1's and 0's 1022 */ 1023 *(volatile int *)ptr = 0xaaaaaaaa; 1024 if (*(volatile int *)ptr != 0xaaaaaaaa) 1025 page_bad = TRUE; 1026 /* 1027 * Test for alternating 0's and 1's 1028 */ 1029 *(volatile int *)ptr = 0x55555555; 1030 if (*(volatile int *)ptr != 0x55555555) 1031 page_bad = TRUE; 1032 /* 1033 * Test for all 1's 1034 */ 1035 *(volatile int *)ptr = 0xffffffff; 1036 if (*(volatile int *)ptr != 0xffffffff) 1037 page_bad = TRUE; 1038 /* 1039 * Test for all 0's 1040 */ 1041 *(volatile int *)ptr = 0x0; 1042 if (*(volatile int *)ptr != 0x0) 1043 page_bad = TRUE; 1044 /* 1045 * Restore original value. 1046 */ 1047 *(int *)ptr = tmp; 1048 1049 /* 1050 * Adjust array of valid/good pages. 1051 */ 1052 if (page_bad == TRUE) 1053 continue; 1054 /* 1055 * If this good page is a continuation of the 1056 * previous set of good pages, then just increase 1057 * the end pointer. Otherwise start a new chunk. 1058 * Note that "end" points one higher than end, 1059 * making the range >= start and < end. 1060 * If we're also doing a speculative memory 1061 * test and we at or past the end, bump up Maxmem 1062 * so that we keep going. The first bad page 1063 * will terminate the loop. 1064 */ 1065 if (phys_avail[pa_indx] == pa) { 1066 phys_avail[pa_indx] += PAGE_SIZE; 1067 } else { 1068 pa_indx++; 1069 if (pa_indx == PHYS_AVAIL_ARRAY_END) { 1070 printf( 1071 "Too many holes in the physical address space, giving up\n"); 1072 pa_indx--; 1073 full = TRUE; 1074 goto do_dump_avail; 1075 } 1076 phys_avail[pa_indx++] = pa; /* start */ 1077 phys_avail[pa_indx] = pa + PAGE_SIZE; /* end */ 1078 } 1079 physmem++; 1080do_dump_avail: 1081 if (dump_avail[da_indx] == pa) { 1082 dump_avail[da_indx] += PAGE_SIZE; 1083 } else { 1084 da_indx++; 1085 if (da_indx == DUMP_AVAIL_ARRAY_END) { 1086 da_indx--; 1087 goto do_next; 1088 } 1089 dump_avail[da_indx++] = pa; /* start */ 1090 dump_avail[da_indx] = pa + PAGE_SIZE; /* end */ 1091 } 1092do_next: 1093 if (full) 1094 break; 1095 } 1096 } 1097 *pte = 0; 1098 invltlb(); 1099 1100 /* 1101 * XXX 1102 * The last chunk must contain at least one page plus the message 1103 * buffer to avoid complicating other code (message buffer address 1104 * calculation, etc.). 1105 */ 1106 while (phys_avail[pa_indx - 1] + PAGE_SIZE + 1107 round_page(MSGBUF_SIZE) >= phys_avail[pa_indx]) { 1108 physmem -= atop(phys_avail[pa_indx] - phys_avail[pa_indx - 1]); 1109 phys_avail[pa_indx--] = 0; 1110 phys_avail[pa_indx--] = 0; 1111 } 1112 1113 Maxmem = atop(phys_avail[pa_indx]); 1114 1115 /* Trim off space for the message buffer. */ 1116 phys_avail[pa_indx] -= round_page(MSGBUF_SIZE); 1117 1118 avail_end = phys_avail[pa_indx]; 1119} 1120 1121u_int64_t 1122hammer_time(u_int64_t modulep, u_int64_t physfree) 1123{ 1124 caddr_t kmdp; 1125 int gsel_tss, off, x; 1126 struct pcpu *pc; 1127 u_int64_t msr; 1128 char *env; 1129 1130 thread0.td_kstack = physfree + KERNBASE; 1131 bzero((void *)thread0.td_kstack, KSTACK_PAGES * PAGE_SIZE); 1132 physfree += KSTACK_PAGES * PAGE_SIZE; 1133 thread0.td_pcb = (struct pcb *) 1134 (thread0.td_kstack + KSTACK_PAGES * PAGE_SIZE) - 1; 1135 1136 /* 1137 * This may be done better later if it gets more high level 1138 * components in it. If so just link td->td_proc here. 1139 */ 1140 proc_linkup(&proc0, &ksegrp0, &thread0); 1141 1142 preload_metadata = (caddr_t)(uintptr_t)(modulep + KERNBASE); 1143 preload_bootstrap_relocate(KERNBASE); 1144 kmdp = preload_search_by_type("elf kernel"); 1145 if (kmdp == NULL) 1146 kmdp = preload_search_by_type("elf64 kernel"); 1147 boothowto = MD_FETCH(kmdp, MODINFOMD_HOWTO, int); 1148 kern_envp = MD_FETCH(kmdp, MODINFOMD_ENVP, char *) + KERNBASE; 1149#ifdef DDB 1150 ksym_start = MD_FETCH(kmdp, MODINFOMD_SSYM, uintptr_t); 1151 ksym_end = MD_FETCH(kmdp, MODINFOMD_ESYM, uintptr_t); 1152#endif 1153 1154 /* Init basic tunables, hz etc */ 1155 init_param1(); 1156 1157 /* 1158 * make gdt memory segments 1159 */ 1160 gdt_segs[GPROC0_SEL].ssd_base = (uintptr_t)&common_tss[0]; 1161 1162 for (x = 0; x < NGDT; x++) { 1163 if (x != GPROC0_SEL && x != (GPROC0_SEL + 1)) 1164 ssdtosd(&gdt_segs[x], &gdt[x]); 1165 } 1166 ssdtosyssd(&gdt_segs[GPROC0_SEL], 1167 (struct system_segment_descriptor *)&gdt[GPROC0_SEL]); 1168 1169 r_gdt.rd_limit = NGDT * sizeof(gdt[0]) - 1; 1170 r_gdt.rd_base = (long) gdt; 1171 lgdt(&r_gdt); 1172 pc = &__pcpu[0]; 1173 1174 wrmsr(MSR_FSBASE, 0); /* User value */ 1175 wrmsr(MSR_GSBASE, (u_int64_t)pc); 1176 wrmsr(MSR_KGSBASE, 0); /* User value while in the kernel */ 1177 1178 pcpu_init(pc, 0, sizeof(struct pcpu)); 1179 PCPU_SET(prvspace, pc); 1180 PCPU_SET(curthread, &thread0); 1181 PCPU_SET(curpcb, thread0.td_pcb); 1182 PCPU_SET(tssp, &common_tss[0]); 1183 1184 /* 1185 * Initialize mutexes. 1186 * 1187 * icu_lock: in order to allow an interrupt to occur in a critical 1188 * section, to set pcpu->ipending (etc...) properly, we 1189 * must be able to get the icu lock, so it can't be 1190 * under witness. 1191 */ 1192 mutex_init(); 1193 mtx_init(&clock_lock, "clk", NULL, MTX_SPIN); 1194 mtx_init(&icu_lock, "icu", NULL, MTX_SPIN | MTX_NOWITNESS); 1195 1196 /* exceptions */ 1197 for (x = 0; x < NIDT; x++) 1198 setidt(x, &IDTVEC(rsvd), SDT_SYSIGT, SEL_KPL, 0); 1199 setidt(IDT_DE, &IDTVEC(div), SDT_SYSIGT, SEL_KPL, 0); 1200 setidt(IDT_DB, &IDTVEC(dbg), SDT_SYSIGT, SEL_KPL, 0); 1201 setidt(IDT_NMI, &IDTVEC(nmi), SDT_SYSIGT, SEL_KPL, 0); 1202 setidt(IDT_BP, &IDTVEC(bpt), SDT_SYSIGT, SEL_UPL, 0); 1203 setidt(IDT_OF, &IDTVEC(ofl), SDT_SYSIGT, SEL_KPL, 0); 1204 setidt(IDT_BR, &IDTVEC(bnd), SDT_SYSIGT, SEL_KPL, 0); 1205 setidt(IDT_UD, &IDTVEC(ill), SDT_SYSIGT, SEL_KPL, 0); 1206 setidt(IDT_NM, &IDTVEC(dna), SDT_SYSIGT, SEL_KPL, 0); 1207 setidt(IDT_DF, &IDTVEC(dblfault), SDT_SYSIGT, SEL_KPL, 1); 1208 setidt(IDT_FPUGP, &IDTVEC(fpusegm), SDT_SYSIGT, SEL_KPL, 0); 1209 setidt(IDT_TS, &IDTVEC(tss), SDT_SYSIGT, SEL_KPL, 0); 1210 setidt(IDT_NP, &IDTVEC(missing), SDT_SYSIGT, SEL_KPL, 0); 1211 setidt(IDT_SS, &IDTVEC(stk), SDT_SYSIGT, SEL_KPL, 0); 1212 setidt(IDT_GP, &IDTVEC(prot), SDT_SYSIGT, SEL_KPL, 0); 1213 setidt(IDT_PF, &IDTVEC(page), SDT_SYSIGT, SEL_KPL, 0); 1214 setidt(IDT_MF, &IDTVEC(fpu), SDT_SYSIGT, SEL_KPL, 0); 1215 setidt(IDT_AC, &IDTVEC(align), SDT_SYSIGT, SEL_KPL, 0); 1216 setidt(IDT_MC, &IDTVEC(mchk), SDT_SYSIGT, SEL_KPL, 0); 1217 setidt(IDT_XF, &IDTVEC(xmm), SDT_SYSIGT, SEL_KPL, 0); 1218 1219 r_idt.rd_limit = sizeof(idt0) - 1; 1220 r_idt.rd_base = (long) idt; 1221 lidt(&r_idt); 1222 1223 /* 1224 * Initialize the console before we print anything out. 1225 */ 1226 cninit(); 1227 1228#ifdef DEV_ISA 1229#ifdef DEV_ATPIC 1230 elcr_probe(); 1231 atpic_startup(); 1232#else 1233 /* Reset and mask the atpics and leave them shut down. */ 1234 outb(IO_ICU1, ICW1_RESET | ICW1_IC4); 1235 outb(IO_ICU1 + ICU_IMR_OFFSET, IDT_IO_INTS); 1236 outb(IO_ICU1 + ICU_IMR_OFFSET, 1 << 2); 1237 outb(IO_ICU1 + ICU_IMR_OFFSET, ICW4_8086); 1238 outb(IO_ICU1 + ICU_IMR_OFFSET, 0xff); 1239 outb(IO_ICU1, OCW3_SEL | OCW3_RR); 1240 1241 outb(IO_ICU2, ICW1_RESET | ICW1_IC4); 1242 outb(IO_ICU2 + ICU_IMR_OFFSET, IDT_IO_INTS + 8); 1243 outb(IO_ICU2 + ICU_IMR_OFFSET, 2); 1244 outb(IO_ICU2 + ICU_IMR_OFFSET, ICW4_8086); 1245 outb(IO_ICU2 + ICU_IMR_OFFSET, 0xff); 1246 outb(IO_ICU2, OCW3_SEL | OCW3_RR); 1247 1248 /* 1249 * Point the ICU spurious interrupt vectors at the APIC spurious 1250 * interrupt handler. 1251 */ 1252 setidt(IDT_IO_INTS + 7, IDTVEC(spuriousint), SDT_SYSIGT, SEL_KPL, 0); 1253 setidt(IDT_IO_INTS + 15, IDTVEC(spuriousint), SDT_SYSIGT, SEL_KPL, 0); 1254#endif 1255#else 1256#error "have you forgotten the isa device?"; 1257#endif 1258 1259 kdb_init(); 1260 1261#ifdef KDB 1262 if (boothowto & RB_KDB) 1263 kdb_enter("Boot flags requested debugger"); 1264#endif 1265 1266 identify_cpu(); /* Final stage of CPU initialization */ 1267 initializecpu(); /* Initialize CPU registers */ 1268 1269 /* make an initial tss so cpu can get interrupt stack on syscall! */ 1270 common_tss[0].tss_rsp0 = thread0.td_kstack + \ 1271 KSTACK_PAGES * PAGE_SIZE - sizeof(struct pcb); 1272 /* Ensure the stack is aligned to 16 bytes */ 1273 common_tss[0].tss_rsp0 &= ~0xFul; 1274 PCPU_SET(rsp0, common_tss[0].tss_rsp0); 1275 1276 /* doublefault stack space, runs on ist1 */ 1277 common_tss[0].tss_ist1 = (long)&dblfault_stack[sizeof(dblfault_stack)]; 1278 1279 /* Set the IO permission bitmap (empty due to tss seg limit) */ 1280 common_tss[0].tss_iobase = sizeof(struct amd64tss); 1281 1282 gsel_tss = GSEL(GPROC0_SEL, SEL_KPL); 1283 ltr(gsel_tss); 1284 1285 /* Set up the fast syscall stuff */ 1286 msr = rdmsr(MSR_EFER) | EFER_SCE; 1287 wrmsr(MSR_EFER, msr); 1288 wrmsr(MSR_LSTAR, (u_int64_t)IDTVEC(fast_syscall)); 1289 wrmsr(MSR_CSTAR, (u_int64_t)IDTVEC(fast_syscall32)); 1290 msr = ((u_int64_t)GSEL(GCODE_SEL, SEL_KPL) << 32) | 1291 ((u_int64_t)GSEL(GUCODE32_SEL, SEL_UPL) << 48); 1292 wrmsr(MSR_STAR, msr); 1293 wrmsr(MSR_SF_MASK, PSL_NT|PSL_T|PSL_I|PSL_C|PSL_D); 1294 1295 getmemsize(kmdp, physfree); 1296 init_param2(physmem); 1297 1298 /* now running on new page tables, configured,and u/iom is accessible */ 1299 1300 /* Map the message buffer. */ 1301 for (off = 0; off < round_page(MSGBUF_SIZE); off += PAGE_SIZE) 1302 pmap_kenter((vm_offset_t)msgbufp + off, avail_end + off); 1303 1304 msgbufinit(msgbufp, MSGBUF_SIZE); 1305 fpuinit(); 1306 1307 /* transfer to user mode */ 1308 1309 _ucodesel = GSEL(GUCODE_SEL, SEL_UPL); 1310 _udatasel = GSEL(GUDATA_SEL, SEL_UPL); 1311 _ucode32sel = GSEL(GUCODE32_SEL, SEL_UPL); 1312 1313 /* setup proc 0's pcb */ 1314 thread0.td_pcb->pcb_flags = 0; /* XXXKSE */ 1315 thread0.td_pcb->pcb_cr3 = KPML4phys; 1316 thread0.td_frame = &proc0_tf; 1317 1318 env = getenv("kernelname"); 1319 if (env != NULL) 1320 strlcpy(kernelname, env, sizeof(kernelname)); 1321 1322 /* Location of kernel stack for locore */ 1323 return ((u_int64_t)thread0.td_pcb); 1324} 1325 1326void 1327cpu_pcpu_init(struct pcpu *pcpu, int cpuid, size_t size) 1328{ 1329 1330 pcpu->pc_acpi_id = 0xffffffff; 1331} 1332 1333void 1334spinlock_enter(void) 1335{ 1336 struct thread *td; 1337 1338 td = curthread; 1339 if (td->td_md.md_spinlock_count == 0) 1340 td->td_md.md_saved_flags = intr_disable(); 1341 td->td_md.md_spinlock_count++; 1342 critical_enter(); 1343} 1344 1345void 1346spinlock_exit(void) 1347{ 1348 struct thread *td; 1349 1350 td = curthread; 1351 critical_exit(); 1352 td->td_md.md_spinlock_count--; 1353 if (td->td_md.md_spinlock_count == 0) 1354 intr_restore(td->td_md.md_saved_flags); 1355} 1356 1357/* 1358 * Construct a PCB from a trapframe. This is called from kdb_trap() where 1359 * we want to start a backtrace from the function that caused us to enter 1360 * the debugger. We have the context in the trapframe, but base the trace 1361 * on the PCB. The PCB doesn't have to be perfect, as long as it contains 1362 * enough for a backtrace. 1363 */ 1364void 1365makectx(struct trapframe *tf, struct pcb *pcb) 1366{ 1367 1368 pcb->pcb_r12 = tf->tf_r12; 1369 pcb->pcb_r13 = tf->tf_r13; 1370 pcb->pcb_r14 = tf->tf_r14; 1371 pcb->pcb_r15 = tf->tf_r15; 1372 pcb->pcb_rbp = tf->tf_rbp; 1373 pcb->pcb_rbx = tf->tf_rbx; 1374 pcb->pcb_rip = tf->tf_rip; 1375 pcb->pcb_rsp = (ISPL(tf->tf_cs)) ? tf->tf_rsp : (long)(tf + 1) - 8; 1376} 1377 1378int 1379ptrace_set_pc(struct thread *td, unsigned long addr) 1380{ 1381 td->td_frame->tf_rip = addr; 1382 return (0); 1383} 1384 1385int 1386ptrace_single_step(struct thread *td) 1387{ 1388 td->td_frame->tf_rflags |= PSL_T; 1389 return (0); 1390} 1391 1392int 1393ptrace_clear_single_step(struct thread *td) 1394{ 1395 td->td_frame->tf_rflags &= ~PSL_T; 1396 return (0); 1397} 1398 1399int 1400fill_regs(struct thread *td, struct reg *regs) 1401{ 1402 struct trapframe *tp; 1403 1404 tp = td->td_frame; 1405 regs->r_r15 = tp->tf_r15; 1406 regs->r_r14 = tp->tf_r14; 1407 regs->r_r13 = tp->tf_r13; 1408 regs->r_r12 = tp->tf_r12; 1409 regs->r_r11 = tp->tf_r11; 1410 regs->r_r10 = tp->tf_r10; 1411 regs->r_r9 = tp->tf_r9; 1412 regs->r_r8 = tp->tf_r8; 1413 regs->r_rdi = tp->tf_rdi; 1414 regs->r_rsi = tp->tf_rsi; 1415 regs->r_rbp = tp->tf_rbp; 1416 regs->r_rbx = tp->tf_rbx; 1417 regs->r_rdx = tp->tf_rdx; 1418 regs->r_rcx = tp->tf_rcx; 1419 regs->r_rax = tp->tf_rax; 1420 regs->r_rip = tp->tf_rip; 1421 regs->r_cs = tp->tf_cs; 1422 regs->r_rflags = tp->tf_rflags; 1423 regs->r_rsp = tp->tf_rsp; 1424 regs->r_ss = tp->tf_ss; 1425 return (0); 1426} 1427 1428int 1429set_regs(struct thread *td, struct reg *regs) 1430{ 1431 struct trapframe *tp; 1432 register_t rflags; 1433 1434 tp = td->td_frame; 1435 rflags = regs->r_rflags & 0xffffffff; 1436 if (!EFL_SECURE(rflags, tp->tf_rflags) || !CS_SECURE(regs->r_cs)) 1437 return (EINVAL); 1438 tp->tf_r15 = regs->r_r15; 1439 tp->tf_r14 = regs->r_r14; 1440 tp->tf_r13 = regs->r_r13; 1441 tp->tf_r12 = regs->r_r12; 1442 tp->tf_r11 = regs->r_r11; 1443 tp->tf_r10 = regs->r_r10; 1444 tp->tf_r9 = regs->r_r9; 1445 tp->tf_r8 = regs->r_r8; 1446 tp->tf_rdi = regs->r_rdi; 1447 tp->tf_rsi = regs->r_rsi; 1448 tp->tf_rbp = regs->r_rbp; 1449 tp->tf_rbx = regs->r_rbx; 1450 tp->tf_rdx = regs->r_rdx; 1451 tp->tf_rcx = regs->r_rcx; 1452 tp->tf_rax = regs->r_rax; 1453 tp->tf_rip = regs->r_rip; 1454 tp->tf_cs = regs->r_cs; 1455 tp->tf_rflags = rflags; 1456 tp->tf_rsp = regs->r_rsp; 1457 tp->tf_ss = regs->r_ss; 1458 td->td_pcb->pcb_flags |= PCB_FULLCTX; 1459 return (0); 1460} 1461 1462/* XXX check all this stuff! */ 1463/* externalize from sv_xmm */ 1464static void 1465fill_fpregs_xmm(struct savefpu *sv_xmm, struct fpreg *fpregs) 1466{ 1467 struct envxmm *penv_fpreg = (struct envxmm *)&fpregs->fpr_env; 1468 struct envxmm *penv_xmm = &sv_xmm->sv_env; 1469 int i; 1470 1471 /* pcb -> fpregs */ 1472 bzero(fpregs, sizeof(*fpregs)); 1473 1474 /* FPU control/status */ 1475 penv_fpreg->en_cw = penv_xmm->en_cw; 1476 penv_fpreg->en_sw = penv_xmm->en_sw; 1477 penv_fpreg->en_tw = penv_xmm->en_tw; 1478 penv_fpreg->en_opcode = penv_xmm->en_opcode; 1479 penv_fpreg->en_rip = penv_xmm->en_rip; 1480 penv_fpreg->en_rdp = penv_xmm->en_rdp; 1481 penv_fpreg->en_mxcsr = penv_xmm->en_mxcsr; 1482 penv_fpreg->en_mxcsr_mask = penv_xmm->en_mxcsr_mask; 1483 1484 /* FPU registers */ 1485 for (i = 0; i < 8; ++i) 1486 bcopy(sv_xmm->sv_fp[i].fp_acc.fp_bytes, fpregs->fpr_acc[i], 10); 1487 1488 /* SSE registers */ 1489 for (i = 0; i < 16; ++i) 1490 bcopy(sv_xmm->sv_xmm[i].xmm_bytes, fpregs->fpr_xacc[i], 16); 1491} 1492 1493/* internalize from fpregs into sv_xmm */ 1494static void 1495set_fpregs_xmm(struct fpreg *fpregs, struct savefpu *sv_xmm) 1496{ 1497 struct envxmm *penv_xmm = &sv_xmm->sv_env; 1498 struct envxmm *penv_fpreg = (struct envxmm *)&fpregs->fpr_env; 1499 int i; 1500 1501 /* fpregs -> pcb */ 1502 /* FPU control/status */ 1503 penv_xmm->en_cw = penv_fpreg->en_cw; 1504 penv_xmm->en_sw = penv_fpreg->en_sw; 1505 penv_xmm->en_tw = penv_fpreg->en_tw; 1506 penv_xmm->en_opcode = penv_fpreg->en_opcode; 1507 penv_xmm->en_rip = penv_fpreg->en_rip; 1508 penv_xmm->en_rdp = penv_fpreg->en_rdp; 1509 penv_xmm->en_mxcsr = penv_fpreg->en_mxcsr; 1510 penv_xmm->en_mxcsr_mask = penv_fpreg->en_mxcsr_mask; 1511 1512 /* FPU registers */ 1513 for (i = 0; i < 8; ++i) 1514 bcopy(fpregs->fpr_acc[i], sv_xmm->sv_fp[i].fp_acc.fp_bytes, 10); 1515 1516 /* SSE registers */ 1517 for (i = 0; i < 16; ++i) 1518 bcopy(fpregs->fpr_xacc[i], sv_xmm->sv_xmm[i].xmm_bytes, 16); 1519} 1520 1521/* externalize from td->pcb */ 1522int 1523fill_fpregs(struct thread *td, struct fpreg *fpregs) 1524{ 1525 1526 fill_fpregs_xmm(&td->td_pcb->pcb_save, fpregs); 1527 return (0); 1528} 1529 1530/* internalize to td->pcb */ 1531int 1532set_fpregs(struct thread *td, struct fpreg *fpregs) 1533{ 1534 1535 set_fpregs_xmm(fpregs, &td->td_pcb->pcb_save); 1536 return (0); 1537} 1538 1539/* 1540 * Get machine context. 1541 */ 1542int 1543get_mcontext(struct thread *td, mcontext_t *mcp, int flags) 1544{ 1545 struct trapframe *tp; 1546 1547 tp = td->td_frame; 1548 PROC_LOCK(curthread->td_proc); 1549 mcp->mc_onstack = sigonstack(tp->tf_rsp); 1550 PROC_UNLOCK(curthread->td_proc); 1551 mcp->mc_r15 = tp->tf_r15; 1552 mcp->mc_r14 = tp->tf_r14; 1553 mcp->mc_r13 = tp->tf_r13; 1554 mcp->mc_r12 = tp->tf_r12; 1555 mcp->mc_r11 = tp->tf_r11; 1556 mcp->mc_r10 = tp->tf_r10; 1557 mcp->mc_r9 = tp->tf_r9; 1558 mcp->mc_r8 = tp->tf_r8; 1559 mcp->mc_rdi = tp->tf_rdi; 1560 mcp->mc_rsi = tp->tf_rsi; 1561 mcp->mc_rbp = tp->tf_rbp; 1562 mcp->mc_rbx = tp->tf_rbx; 1563 mcp->mc_rcx = tp->tf_rcx; 1564 mcp->mc_rflags = tp->tf_rflags; 1565 if (flags & GET_MC_CLEAR_RET) { 1566 mcp->mc_rax = 0; 1567 mcp->mc_rdx = 0; 1568 mcp->mc_rflags &= ~PSL_C; 1569 } else { 1570 mcp->mc_rax = tp->tf_rax; 1571 mcp->mc_rdx = tp->tf_rdx; 1572 } 1573 mcp->mc_rip = tp->tf_rip; 1574 mcp->mc_cs = tp->tf_cs; 1575 mcp->mc_rsp = tp->tf_rsp; 1576 mcp->mc_ss = tp->tf_ss; 1577 mcp->mc_len = sizeof(*mcp); 1578 get_fpcontext(td, mcp); 1579 return (0); 1580} 1581 1582/* 1583 * Set machine context. 1584 * 1585 * However, we don't set any but the user modifiable flags, and we won't 1586 * touch the cs selector. 1587 */ 1588int 1589set_mcontext(struct thread *td, const mcontext_t *mcp) 1590{ 1591 struct trapframe *tp; 1592 long rflags; 1593 int ret; 1594 1595 tp = td->td_frame; 1596 if (mcp->mc_len != sizeof(*mcp)) 1597 return (EINVAL); 1598 rflags = (mcp->mc_rflags & PSL_USERCHANGE) | 1599 (tp->tf_rflags & ~PSL_USERCHANGE); 1600 ret = set_fpcontext(td, mcp); 1601 if (ret != 0) 1602 return (ret); 1603 tp->tf_r15 = mcp->mc_r15; 1604 tp->tf_r14 = mcp->mc_r14; 1605 tp->tf_r13 = mcp->mc_r13; 1606 tp->tf_r12 = mcp->mc_r12; 1607 tp->tf_r11 = mcp->mc_r11; 1608 tp->tf_r10 = mcp->mc_r10; 1609 tp->tf_r9 = mcp->mc_r9; 1610 tp->tf_r8 = mcp->mc_r8; 1611 tp->tf_rdi = mcp->mc_rdi; 1612 tp->tf_rsi = mcp->mc_rsi; 1613 tp->tf_rbp = mcp->mc_rbp; 1614 tp->tf_rbx = mcp->mc_rbx; 1615 tp->tf_rdx = mcp->mc_rdx; 1616 tp->tf_rcx = mcp->mc_rcx; 1617 tp->tf_rax = mcp->mc_rax; 1618 tp->tf_rip = mcp->mc_rip; 1619 tp->tf_rflags = rflags; 1620 tp->tf_rsp = mcp->mc_rsp; 1621 tp->tf_ss = mcp->mc_ss; 1622 td->td_pcb->pcb_flags |= PCB_FULLCTX; 1623 return (0); 1624} 1625 1626static void 1627get_fpcontext(struct thread *td, mcontext_t *mcp) 1628{ 1629 1630 mcp->mc_ownedfp = fpugetregs(td, (struct savefpu *)&mcp->mc_fpstate); 1631 mcp->mc_fpformat = fpuformat(); 1632} 1633 1634static int 1635set_fpcontext(struct thread *td, const mcontext_t *mcp) 1636{ 1637 1638 if (mcp->mc_fpformat == _MC_FPFMT_NODEV) 1639 return (0); 1640 else if (mcp->mc_fpformat != _MC_FPFMT_XMM) 1641 return (EINVAL); 1642 else if (mcp->mc_ownedfp == _MC_FPOWNED_NONE) 1643 /* We don't care what state is left in the FPU or PCB. */ 1644 fpstate_drop(td); 1645 else if (mcp->mc_ownedfp == _MC_FPOWNED_FPU || 1646 mcp->mc_ownedfp == _MC_FPOWNED_PCB) { 1647 /* 1648 * XXX we violate the dubious requirement that fpusetregs() 1649 * be called with interrupts disabled. 1650 * XXX obsolete on trap-16 systems? 1651 */ 1652 fpusetregs(td, (struct savefpu *)&mcp->mc_fpstate); 1653 } else 1654 return (EINVAL); 1655 return (0); 1656} 1657 1658void 1659fpstate_drop(struct thread *td) 1660{ 1661 register_t s; 1662 1663 s = intr_disable(); 1664 if (PCPU_GET(fpcurthread) == td) 1665 fpudrop(); 1666 /* 1667 * XXX force a full drop of the fpu. The above only drops it if we 1668 * owned it. 1669 * 1670 * XXX I don't much like fpugetregs()'s semantics of doing a full 1671 * drop. Dropping only to the pcb matches fnsave's behaviour. 1672 * We only need to drop to !PCB_INITDONE in sendsig(). But 1673 * sendsig() is the only caller of fpugetregs()... perhaps we just 1674 * have too many layers. 1675 */ 1676 curthread->td_pcb->pcb_flags &= ~PCB_FPUINITDONE; 1677 intr_restore(s); 1678} 1679 1680int 1681fill_dbregs(struct thread *td, struct dbreg *dbregs) 1682{ 1683 struct pcb *pcb; 1684 1685 if (td == NULL) { 1686 dbregs->dr[0] = rdr0(); 1687 dbregs->dr[1] = rdr1(); 1688 dbregs->dr[2] = rdr2(); 1689 dbregs->dr[3] = rdr3(); 1690 dbregs->dr[6] = rdr6(); 1691 dbregs->dr[7] = rdr7(); 1692 } else { 1693 pcb = td->td_pcb; 1694 dbregs->dr[0] = pcb->pcb_dr0; 1695 dbregs->dr[1] = pcb->pcb_dr1; 1696 dbregs->dr[2] = pcb->pcb_dr2; 1697 dbregs->dr[3] = pcb->pcb_dr3; 1698 dbregs->dr[6] = pcb->pcb_dr6; 1699 dbregs->dr[7] = pcb->pcb_dr7; 1700 } 1701 dbregs->dr[4] = 0; 1702 dbregs->dr[5] = 0; 1703 dbregs->dr[8] = 0; 1704 dbregs->dr[9] = 0; 1705 dbregs->dr[10] = 0; 1706 dbregs->dr[11] = 0; 1707 dbregs->dr[12] = 0; 1708 dbregs->dr[13] = 0; 1709 dbregs->dr[14] = 0; 1710 dbregs->dr[15] = 0; 1711 return (0); 1712} 1713 1714int 1715set_dbregs(struct thread *td, struct dbreg *dbregs) 1716{ 1717 struct pcb *pcb; 1718 int i; 1719 u_int64_t mask1, mask2; 1720 1721 if (td == NULL) { 1722 load_dr0(dbregs->dr[0]); 1723 load_dr1(dbregs->dr[1]); 1724 load_dr2(dbregs->dr[2]); 1725 load_dr3(dbregs->dr[3]); 1726 load_dr6(dbregs->dr[6]); 1727 load_dr7(dbregs->dr[7]); 1728 } else { 1729 /* 1730 * Don't let an illegal value for dr7 get set. Specifically, 1731 * check for undefined settings. Setting these bit patterns 1732 * result in undefined behaviour and can lead to an unexpected 1733 * TRCTRAP or a general protection fault right here. 1734 * Upper bits of dr6 and dr7 must not be set 1735 */ 1736 for (i = 0, mask1 = 0x3<<16, mask2 = 0x2<<16; i < 8; 1737 i++, mask1 <<= 2, mask2 <<= 2) 1738 if ((dbregs->dr[7] & mask1) == mask2) 1739 return (EINVAL); 1740 if ((dbregs->dr[6] & 0xffffffff00000000ul) != 0 || 1741 (dbregs->dr[7] & 0xffffffff00000000ul) != 0) 1742 return (EINVAL); 1743 1744 pcb = td->td_pcb; 1745 1746 /* 1747 * Don't let a process set a breakpoint that is not within the 1748 * process's address space. If a process could do this, it 1749 * could halt the system by setting a breakpoint in the kernel 1750 * (if ddb was enabled). Thus, we need to check to make sure 1751 * that no breakpoints are being enabled for addresses outside 1752 * process's address space. 1753 * 1754 * XXX - what about when the watched area of the user's 1755 * address space is written into from within the kernel 1756 * ... wouldn't that still cause a breakpoint to be generated 1757 * from within kernel mode? 1758 */ 1759 1760 if (dbregs->dr[7] & 0x3) { 1761 /* dr0 is enabled */ 1762 if (dbregs->dr[0] >= VM_MAXUSER_ADDRESS) 1763 return (EINVAL); 1764 } 1765 if (dbregs->dr[7] & 0x3<<2) { 1766 /* dr1 is enabled */ 1767 if (dbregs->dr[1] >= VM_MAXUSER_ADDRESS) 1768 return (EINVAL); 1769 } 1770 if (dbregs->dr[7] & 0x3<<4) { 1771 /* dr2 is enabled */ 1772 if (dbregs->dr[2] >= VM_MAXUSER_ADDRESS) 1773 return (EINVAL); 1774 } 1775 if (dbregs->dr[7] & 0x3<<6) { 1776 /* dr3 is enabled */ 1777 if (dbregs->dr[3] >= VM_MAXUSER_ADDRESS) 1778 return (EINVAL); 1779 } 1780 1781 pcb->pcb_dr0 = dbregs->dr[0]; 1782 pcb->pcb_dr1 = dbregs->dr[1]; 1783 pcb->pcb_dr2 = dbregs->dr[2]; 1784 pcb->pcb_dr3 = dbregs->dr[3]; 1785 pcb->pcb_dr6 = dbregs->dr[6]; 1786 pcb->pcb_dr7 = dbregs->dr[7]; 1787 1788 pcb->pcb_flags |= PCB_DBREGS; 1789 } 1790 1791 return (0); 1792} 1793 1794void 1795reset_dbregs(void) 1796{ 1797 1798 load_dr7(0); /* Turn off the control bits first */ 1799 load_dr0(0); 1800 load_dr1(0); 1801 load_dr2(0); 1802 load_dr3(0); 1803 load_dr6(0); 1804} 1805 1806/* 1807 * Return > 0 if a hardware breakpoint has been hit, and the 1808 * breakpoint was in user space. Return 0, otherwise. 1809 */ 1810int 1811user_dbreg_trap(void) 1812{ 1813 u_int64_t dr7, dr6; /* debug registers dr6 and dr7 */ 1814 u_int64_t bp; /* breakpoint bits extracted from dr6 */ 1815 int nbp; /* number of breakpoints that triggered */ 1816 caddr_t addr[4]; /* breakpoint addresses */ 1817 int i; 1818 1819 dr7 = rdr7(); 1820 if ((dr7 & 0x000000ff) == 0) { 1821 /* 1822 * all GE and LE bits in the dr7 register are zero, 1823 * thus the trap couldn't have been caused by the 1824 * hardware debug registers 1825 */ 1826 return 0; 1827 } 1828 1829 nbp = 0; 1830 dr6 = rdr6(); 1831 bp = dr6 & 0x0000000f; 1832 1833 if (!bp) { 1834 /* 1835 * None of the breakpoint bits are set meaning this 1836 * trap was not caused by any of the debug registers 1837 */ 1838 return 0; 1839 } 1840 1841 /* 1842 * at least one of the breakpoints were hit, check to see 1843 * which ones and if any of them are user space addresses 1844 */ 1845 1846 if (bp & 0x01) { 1847 addr[nbp++] = (caddr_t)rdr0(); 1848 } 1849 if (bp & 0x02) { 1850 addr[nbp++] = (caddr_t)rdr1(); 1851 } 1852 if (bp & 0x04) { 1853 addr[nbp++] = (caddr_t)rdr2(); 1854 } 1855 if (bp & 0x08) { 1856 addr[nbp++] = (caddr_t)rdr3(); 1857 } 1858 1859 for (i=0; i<nbp; i++) { 1860 if (addr[i] < 1861 (caddr_t)VM_MAXUSER_ADDRESS) { 1862 /* 1863 * addr[i] is in user space 1864 */ 1865 return nbp; 1866 } 1867 } 1868 1869 /* 1870 * None of the breakpoints are in user space. 1871 */ 1872 return 0; 1873} 1874 1875#ifdef KDB 1876 1877/* 1878 * Provide inb() and outb() as functions. They are normally only 1879 * available as macros calling inlined functions, thus cannot be 1880 * called from the debugger. 1881 * 1882 * The actual code is stolen from <machine/cpufunc.h>, and de-inlined. 1883 */ 1884 1885#undef inb 1886#undef outb 1887 1888/* silence compiler warnings */ 1889u_char inb(u_int); 1890void outb(u_int, u_char); 1891 1892u_char 1893inb(u_int port) 1894{ 1895 u_char data; 1896 /* 1897 * We use %%dx and not %1 here because i/o is done at %dx and not at 1898 * %edx, while gcc generates inferior code (movw instead of movl) 1899 * if we tell it to load (u_short) port. 1900 */ 1901 __asm __volatile("inb %%dx,%0" : "=a" (data) : "d" (port)); 1902 return (data); 1903} 1904 1905void 1906outb(u_int port, u_char data) 1907{ 1908 u_char al; 1909 /* 1910 * Use an unnecessary assignment to help gcc's register allocator. 1911 * This make a large difference for gcc-1.40 and a tiny difference 1912 * for gcc-2.6.0. For gcc-1.40, al had to be ``asm("ax")'' for 1913 * best results. gcc-2.6.0 can't handle this. 1914 */ 1915 al = data; 1916 __asm __volatile("outb %0,%%dx" : : "a" (al), "d" (port)); 1917} 1918 1919#endif /* KDB */ 1920