$FreeBSD: head/share/man/man4/rsu.4 267938 2014-06-26 21:46:14Z bapt $
Copyright (c) 2010 Damien Bergamini <damien.bergamini@free.fr>
Permission to use, copy, modify, and distribute this software for any
purpose with or without fee is hereby granted, provided that the above
copyright notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
.Dd May 3, 2014 .Dt RSU 4 .Os .Sh NAME .Nm rsu .Nd Realtek RTL8188SU/RTL8192SU USB IEEE 802.11b/g/n wireless network device .Sh SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: d -ragged -offset indent .Cd "device ehci" .Cd "device uhci" .Cd "device ohci" .Cd "device usb" .Cd "device rsu" .Cd "device wlan" .Ed
p Alternatively, to load the driver as a module at boot time, place the following line in .Xr loader.conf 5 : d -literal -offset indent if_rsu_load="YES" .Ed
p After you have read the license in
a /usr/share/doc/legal/realtek you will want to add the following lines to .Xr loader.conf 5 : d -literal -offset indent legal.realtek.license_ack=1 rsu-rtl8712fw_load="YES" .Ed .Sh DESCRIPTION The .Nm driver supports USB 2.0 wireless network devices based on Realtek RTL8188SU, RTL8191SU and RTL8192SU chipsets.
p The RTL8188SU is a highly integrated 802.11n adapter that combines a MAC, a 1T1R capable baseband and an RF in a single chip. It operates in the 2GHz spectrum only.
p The RTL8191SU is a highly integrated multiple-in, single-out (MISO) 802.11n adapter that combines a MAC, a 1T2R capable baseband and an RF in a single chip. It operates in the 2GHz spectrum only.
p The RTL8192SU is a highly integrated multiple-in, multiple-out (MIMO) 802.11n adapter that combines a MAC, a 2T2R capable baseband and an RF in a single chip. It operates in the 2GHz spectrum only.
p These are the modes the .Nm driver can operate in: l -tag -width "IBSS-masterXX" t BSS mode Also known as .Em infrastructure mode, this is used when associating with an access point, through which all traffic passes. This mode is the default. .El
p The .Nm driver can be configured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA-PSK and WPA2-PSK). WPA is the de facto encryption standard for wireless networks. It is strongly recommended that WEP not be used as the sole mechanism to secure wireless communication, due to serious weaknesses in it.
p The .Nm driver can be configured at runtime with .Xr ifconfig 8 . .Sh FILES The driver needs at least version 1.2 of the following firmware file, which is loaded when an interface is attached:
p l -tag -width Ds -offset indent -compact t Pa /boot/kernel/rsu-rtl8712fw.ko .El .Sh HARDWARE The .Nm driver provices support for Realtek RTL8188SU/RTL8192SU USB IEEE 802.11b/g/n wireless network adapters, including:
p l -tag -width Ds -offset indent -compact t ASUS USB-N10 t Belkin F7D1101 v1 t D-Link DWA-131 A1 t EDUP EP-MS150N(W) t Hercules HWGUn-54 t Hercules HWNUm-300 t Planex GW-USNano t Sitecom WL-349 v1 t Sitecom WL-353 t Sweex LW154 t TRENDnet TEW-648UB t TRENDnet TEW-649UB .El .Sh EXAMPLES Join an existing BSS network (i.e., connect to an access point): d -literal -offset indent ifconfig wlan create wlandev rsu0 inet 192.168.0.20 \e netmask 0xffffff00 .Ed
p Join a specific BSS network with network name .Dq Li my_net :
p .Dl "ifconfig wlan create wlandev rsu0 ssid my_net up"
p Join a specific BSS network with 64-bit WEP encryption: d -literal -offset indent ifconfig wlan create wlandev rsu0 ssid my_net \e wepmode on wepkey 0x1234567890 weptxkey 1 up .Ed .Sh DIAGNOSTICS l -diag t "%s: failed load firmware of file rsu-rtl8712fw" For some reason, the driver was unable to read the microcode file from the filesystem. The file might be missing or corrupted. t "device timeout" A frame dispatched to the hardware for transmission did not complete in time. The driver will reset the hardware. This should not happen. .El .Sh SEE ALSO .Xr intro 1 , .Xr usb 4 , .Xr netintro 4 , .Xr rsufw 4 , .Xr wlan 4 , .Xr arp 8 , .Xr hostapd 8 , .Xr ifconfig 8 , .Xr wpa_supplicant 8 .Sh HISTORY The .Nm driver first appeared in .Ox 4.9 and .Fx 10.0 . .Sh AUTHORS .An -nosplit The .Nm driver was written by .An Damien Bergamini Aq Mt damien@openbsd.org and ported by .An Rui Paulo Aq Mt rpaulo@freebsd.org . .Sh CAVEATS The .Nm driver does not support any of the 802.11n capabilities offered by the adapters.