All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
$FreeBSD: head/share/man/man4/aac.4 81157 2001-08-05 11:15:23Z sheldonh $
.Dd February 22, 2001 .Dt AAC 4 .Os .Sh NAME .Nm aac .Nd Adaptec AdvancedRAID Controller driver .Sh SYNOPSIS .Cd options AAC_COMPAT_LINUX .Cd options AAC_DEBUG=N .Cd device pci .Cd device aac .Sh DESCRIPTION The .Nm driver provides support for the Adaptec AAC family SCSI Ultra2 and Ultra160 RAID controllers. These controllers support RAID 0, 1, 5, 10, and volume sets. They have four channels in the add-in version or 1-2 channels in the motherboard integrated version, and are most often found relabelled by Dell or Hewlett-Packard. Supported controllers include: l -bullet t AAC-364 t AAC-3642 t HP NetRAID 4M t Dell PERC 2/Si t Dell PERC 2/QC t Dell PERC 3/Si t Dell PERC 3/Di
p .El Access to RAID containers is available via the
a /dev/aacd? device nodes. Individual drives cannot be accessed unless they are part of a container or volume set, and non-fixed disks cannot be accessed. Containers can be configured by using either the on-board BIOS utility of the card, or a Linux-based management application.
p The
a /dev/aac? device nodes provide access to the management interface of the controller. One node exists per installed card. The aliases
a /dev/hpn? exist for the Dell and HP flavors, respectively, and are required for the CLI management utility available from these vendors to work. Compiling the driver with the .Dv AAC_COMPAT_LINUX option enables the Linux-compatible .Xr ioctl 2 interface for the management device. The .Xr ioctl 2 command set is heavily tailored to existing linux applications. Native .Xr ioctl 2 support is not present at this time. .Sh FILES l -tag -width /boot/kernel/aac.ko -compact t Pa /dev/aac? aac management interface t Pa /dev/aacd? disk/container interface t Pa /boot/kernel/aac.ko aac loadable module .El .Sh IMPLEMENTATION NOTES The read-only sysctl .Va hw.aac.iosize_max defaults to 65536 and may be set at boot time to another value via .Xr loader 8 . This value determines the maximum data transfer size allowed to/from an array. Setting it higher will result in better performance, especially for large sequential access patterns. .Em Beware : internal limitations of the card limit this value to 64K for arrays with many members. While it may be safe to raise this value, this is done .Em at the operator's own risk . Note also that performance peaks at a value of 96K, and drops off dramatically at 128K, due to other limitations of the card. .Sh DIAGNOSTICS Compiling with .Dv AAC_DEBUG set to a number between 0 and 3 will enable increasingly verbose debug messages.
p The adapter can send status and alert messages asynchronously to the driver. These messages are printed on the system console, and are also queued for retrieval by a management application. .Sh SEE ALSO .Xr kld 4 , .Xr linux 4 , .Xr kldload 8 .Sh HISTORY The .Nm driver first appeared in .Fx 4.3 and is d .Sh AUTHORS .An Mike Smith .Aq msmith@FreeBSD.org .An Scott Long .Aq scottl@FreeBSD.org .Sh BUGS This driver has not been tested on Alpha, though it should work.
p The controller is not actually paused on suspend/resume.
p Adapter-initiated messages are not returned back to the controller, possibly causing a resource leak on the controller.
p Unloading and reloading the driver as a kernel loadable module without rebooting the system is strongly discouraged.
p Only the Linux-compatible .Xr ioctl 2 interface is implemented at this time. This is not a bug, but native .Xr ioctl 2 support is desirable.