All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
$FreeBSD: head/sbin/geom/class/eli/geli.8 148569 2005-07-30 13:27:15Z brueffer $
.Dd April 11, 2005 .Dt GELI 8 .Os .Sh NAME .Nm geli .Nd "control utility for cryptographic GEOM class" .Sh SYNOPSIS To compile GEOM_ELI into your kernel, place the following lines in your kernel configuration file: d -ragged -offset indent .Cd "device crypto" .Cd "device cryptodev" .Cd "options GEOM_ELI" .Ed
p Alternately, to load the GEOM_ELI module at boot time, place the following line in your .Xr loader.conf 5 : d -literal -offset indent geom_eli_load="YES" .Ed
p Usage of the .Xr geli 8 utility:
p .Nm .Cm init .Op Fl bPv .Op Fl a Ar algo .Op Fl i Ar iterations .Op Fl K Ar newkeyfile .Op Fl l Ar keylen .Op Fl s Ar sectorsize .Ar prov .Nm .Cm label - an alias for .Cm init .Nm .Cm attach .Op Fl dpv .Op Fl k Ar keyfile .Ar prov .Nm .Cm detach .Op Fl fl .Ar prov ... .Nm .Cm stop - an alias for .Cm detach .Nm .Cm onetime .Op Fl d .Op Fl a Ar algo .Op Fl l Ar keylen .Op Fl s Ar sectorsize .Ar prov ... .Nm .Cm setkey .Op Fl pPv .Op Fl k Ar keyfile .Op Fl K Ar newkeyfile .Op Fl n Ar keyno .Ar prov .Nm .Cm delkey .Op Fl afv .Op Fl n Ar keyno .Ar prov .Nm .Cm kill .Op Fl av .Op Ar prov ... .Nm .Cm backup .Op Fl v .Ar prov .Ar file .Nm .Cm restore .Op Fl v .Ar file .Ar prov .Nm .Cm clear .Op Fl v .Ar prov ... .Nm .Cm dump .Op Fl v .Ar prov ... .Nm .Cm list .Nm .Cm status .Nm .Cm load .Nm .Cm unload .Sh DESCRIPTION The .Nm utility is used to configure encryption on GEOM providers.
p The following is a list of the most important features:
p l -bullet -offset indent -compact t Utilizes the .Xr crypto 9 framework, so when there is crypto hardware available, .Nm will make use of it automatically. If cryptography needs to be done in software, a dedicated kernel thread will be started to do the crypto work in there. t Supports many cryptographic algorithms (currently .Nm AES , .Nm Blowfish and .Nm 3DES ) . t Can create a key from a couple of components (user entered passphrase, random bits from a file, etc.). t Allows to encrypt the root partition - the user will be asked for the passphrase before the root file system is mounted. t The passphrase of the user is strengthened with: .Rs .%A B. Kaliski .%T "PKCS #5: Password-Based Cryptography Specification, Version 2.0." .%R RFC .%N 2898 .Re t Allows to use two independent keys (e.g. .Qq "user key" and .Qq "company key" ) . t It is fast - .Nm performs simple sector-to-sector encryption. t Allows to backup/restore Master Keys, so when a user has to quickly destroy his keys, it is possible to get the data back by restoring keys from the backup. t Providers can be configured to automatically detach on last close (so users don't have to remember to detach providers after unmounting the file systems). t Allows to attach a provider with a random, one-time key - useful for swap partitions and temporary file systems. .El
p The first argument to .Nm indicates an action to be performed: l -tag -width ".Cm onetime" t Cm init Initialize provider which needs to be encrypted. Here you can set up the cryptographic algorithm to use, key length, etc. The last provider's sector is used to store metadata.
p Additional options include: l -tag -width ".Fl a Ar algo" t Fl a Ar algo Encryption algorithm to use. Currently supported algorithms are: .Nm AES , .Nm Blowfish and .Nm 3DES . The default is .Nm AES . t Fl b Ask for the passphrase on boot, before the root partition is mounted. This makes it possible to use an encrypted root partition. One will still need bootable unencrypted storage with a
a /boot/ directory, which can be a CD-ROM disc or USB pen-drive, that can be removed after boot. t Fl i Ar iterations Number of iterations to use with PKCS#5v2. If this option is not specified, .Nm will find the number of iterations which is equal to 2 seconds of crypto work. If 0 is given, PKCS#5v2 will not be used. t Fl K Ar newkeyfile Specifies a file which contains part of the key. If .Ar newkeyfile is given as -, standard input will be used. Here is how more than one file with a key component can be used: d -literal -offset indent # cat key1 key2 key3 | geli init -K - /dev/da0 .Ed t Fl l Ar keylen Key length to use with the given cryptographic algorithm. If not given, the default key length for the given algorithm is used, which is: 128 for .Nm AES , 128 for .Nm Blowfish and 192 for .Nm 3DES . t Fl s Ar sectorsize Change decrypted provider's sector size. Increasing sector size allows to increase performance, because we need to generate an IV and do encrypt/decrypt for every single sector - less number of sectors means less work to do. t Fl P Do not use passphrase as the key component. .El t Cm attach Attach the given provider. The master key will be decrypted using the given passphrase/keyfile and a new GEOM provider will be created using the given provider's name with an .Qq .eli suffix.
p Additional options include: l -tag -width ".Fl a Ar algo" t Fl d If specified, a decrypted provider will be detached automatically on last close. This can help with short memory - user doesn't have to remember to detach the provider after unmounting the file system. It only works when the provider was opened for writing, so it will not work if the file system on the provider is mounted read-only. Probably a better choice is the .Fl l option for the .Cm detach subcommand. t Fl k Ar keyfile Specifies a file which contains part of the key. For more information see the description of the .Fl K option for the .Cm init subcommand. t Fl p Do not use passphrase as the key component. .El t Cm detach Detach the given providers, which means remove the devfs entry and clear the keys from memory.
p Additional options include: l -tag -width ".Fl a Ar algo" t Fl f Force detach - detach even if the provider is open. t Fl l Mark provider to detach on last close. If this option is specified, the provider will not be detached until it is open, but when it will be closed last time, it will be automatically detached (even if it was only opened for reading). .El t Cm onetime Attach the given providers with random, one-time keys. The command can be used to encrypt swap partitions or temporary file systems.
p Additional options include: l -tag -width ".Fl a Ar algo" t Fl a Ar algo Encryption algorithm to use. For more information, see the description of the .Cm init subcommand. t Fl d Detach on last close. Note, the option is not usable for temporary file systems as the provider will be detached after creating the file system on it. It still can (and should be) used for swap partitions. For more information, see the description of the .Cm attach subcommand. t Fl l Ar keylen Key length to use with the given cryptographic algorithm. For more information, see the description of the .Cm init subcommand. t Fl s Ar sectorsize Change decrypted provider's sector size. For more information, see the description of the .Cm init subcommand. .El t Cm setkey Change or setup (if not yet initialized) selected key. There is one master key, which can be encrypted with two independent user keys. With the .Cm init subcommand, only key number 0 is initialized. The key can always be changed: for an attached provider, for a detached provider or on the backup file. When a provider is attached, the user does not have to provide an old passphrase/keyfile.
p Additional options include: l -tag -width ".Fl a Ar algo" t Fl k Ar keyfile Specifies a file which contains part of the old key. t Fl K Ar newkeyfile Specifies a file which contains part of the new key. t Fl n Ar keyno Specifies the number of the key to change (could be 0 or 1). If the provider is attached and no key number is given, the key used for attaching the provider will be changed. If the provider is detached (or we are operating on a backup file) and no key number is given, the key decrypted with the passphrase/keyfile will be changed. t Fl p Do not use passphrase as the old key component. t Fl P Do not use passphrase as the new key component. .El t Cm delkey Destroy (overwrite with random data) the selected key. If one is destroying keys for an attached provider, the provider will not be detached even if all keys will be destroyed. It can be even rescued with the .Cm setkey subcommand. l -tag -width ".Fl a Ar algo" t Fl a Destroy all keys (does not need .Fl f option). t Fl f Force key destruction. This option is needed to destroy the last key. t Fl n Ar keyno Specifies the key number. If the provider is attached and no key number is given, the key used for attaching the provider will be destroyed. If provider is detached (or we are operating on a backup file) the key number has to be given. .El t Cm kill This command should be used in emergency situations. It will destroy all keys on the given provider and will detach it forcibly (if it is attached). This is absolutely a one-way command - if you do not have a metadata backup, your data is gone for good. l -tag -width ".Fl a Ar algo" t Fl a If specified, all currently attached providers will be killed. .El t Cm backup Backup metadata from the given provider to the given file. t Cm restore Restore metadata from the given file to the given provider. t Cm clear Clear metadata from the given providers. t Cm dump Dump metadata stored on the given providers. t Cm list See .Xr geom 8 . t Cm status See .Xr geom 8 . t Cm load See .Xr geom 8 . t Cm unload See .Xr geom 8 . .El
p Additional options include: l -tag -width ".Fl v" t Fl v Be more verbose. .El .Sh SYSCTL VARIABLES The following .Xr sysctl 8 variables can be used to control the behavior of the .Nm ELI GEOM class. The default value is shown next to each variable. l -tag -width indent t Va kern.geom.eli.debug : No 0 Debug level of the .Nm ELI GEOM class. This can be set to a number between 0 and 3 inclusive. If set to 0, minimal debug information is printed. If set to 3, the maximum amount of debug information is printed. This variable could be set in
a /boot/loader.conf . t Va kern.geom.eli.tries : No 3 Number of times a user is asked for the passphrase. This is only used for providers which should be attached on boot (before the root file system is mounted). If set to 0, attaching providers on boot will be disabled. This variable should be set in
a /boot/loader.conf . t Va kern.geom.eli.overwrites : No 5 Specifies how many times the Master-Key will be overwritten with random values when it is destroyed. After this operation it is filled with zeros. t Va kern.geom.eli.visible_passphrase : No 0 If set to 1, the passphrase entered on boot (before the root file system is mounted) will be visible. This possibility should be used with caution as the entered passphrase can be logged and exposed via .Xr dmesg 8 . This variable should be set in
a /boot/loader.conf . t Va kern.geom.eli.threads : No 1 Specifies how many kernel threads should be used for doing software cryptography. Its purpose is to increase performance on SMP systems. This variable could be set in
a /boot/loader.conf . .El .Sh EXIT STATUS Exit status is 0 on success, and 1 if the command fails. .Sh EXAMPLES Initialize a provider which is going to be encrypted with a passphrase and random data from a file on the user's pen drive. Use 4kB sector size. Attach the provider, create a file system and mount it. Do the work. Unmount the provider and detach it: d -literal -offset indent # dd if=/dev/random of=/mnt/pendrive/da2.key bs=64 count=1 # geli init -s 4096 -K /mnt/pendrive/da2.key /dev/da2 Enter new passphrase: Reenter new passphrase: # geli attach -k /mnt/pendrive/da2.key /dev/da2 Enter passphrase: # dd if=/dev/random of=/dev/da2.eli bs=1m # newfs /dev/da2.eli # mount /dev/da2.eli /mnt/secret ... # umount /mnt/secret # geli detach da2.eli .Ed
p Create an encrypted provider, but use two keys: one for your girlfriend and one for you (so there will be no tragedy if she forgets her passphrase): d -literal -offset indent # geli init /dev/da2 Enter new passphrase: (enter your passphrase) Reenter new passphrase: # geli setkey -n 1 /dev/da2 Enter passphrase: (enter your passphrase) Enter new passphrase: (let your girlfriend enter her passphrase ...) Reenter new passphrase: (... twice) .Ed
p You are the security-person in your company. Create an encrypted provider for use by the user, but remember that users forget their passphrases, so back Master Key up with your own random key: d -literal -offset indent # dd if=/dev/random of=/mnt/pendrive/keys/`hostname` bs=64 count=1 # geli init -P -K /mnt/pendrive/keys/`hostname` /dev/ad0s1e # geli backup /dev/ad0s1e /mnt/pendrive/backups/`hostname` (use key number 0, so the encrypted Master Key by you will be overwritten) # geli setkey -n 0 -k /mnt/pendrive/keys/`hostname` /dev/ad0s1e (allow the user to enter his passphrase) Enter new passphrase: Reenter new passphrase: .Ed
p Encrypted swap partition setup: d -literal -offset indent # dd if=/dev/random of=/dev/ad0s1b bs=1m # geli onetime -d -a 3des ad0s1b # swapon /dev/ad0s1b.eli .Ed .Sh SEE ALSO .Xr crypto 4 , .Xr gbde 4 , .Xr geom 4 , .Xr gbde 8 , .Xr geom 8 , .Xr crypto 9 .Sh HISTORY The .Nm utility appeared in .Fx 5.5 . .Sh AUTHORS .An Pawel Jakub Dawidek Aq pjd@FreeBSD.org