pmap_prot.x revision 26207
1%/* 2% * Sun RPC is a product of Sun Microsystems, Inc. and is provided for 3% * unrestricted use provided that this legend is included on all tape 4% * media and as a part of the software program in whole or part. Users 5% * may copy or modify Sun RPC without charge, but are not authorized 6% * to license or distribute it to anyone else except as part of a product or 7% * program developed by the user. 8% * 9% * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE 10% * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR 11% * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE. 12% * 13% * Sun RPC is provided with no support and without any obligation on the 14% * part of Sun Microsystems, Inc. to assist in its use, correction, 15% * modification or enhancement. 16% * 17% * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE 18% * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC 19% * OR ANY PART THEREOF. 20% * 21% * In no event will Sun Microsystems, Inc. be liable for any lost revenue 22% * or profits or other special, indirect and consequential damages, even if 23% * Sun has been advised of the possibility of such damages. 24% * 25% * Sun Microsystems, Inc. 26% * 2550 Garcia Avenue 27% * Mountain View, California 94043 28% */ 29%/* 30% * Copyright (c) 1984,1989 by Sun Microsystems, Inc. 31% */ 32 33%/* from pmap_prot.x */ 34 35#ifdef RPC_HDR 36% 37%#pragma ident "@(#)pmap_prot.x 1.6 94/04/29 SMI" 38% 39%#ifndef _KERNEL 40% 41#endif 42 43/* 44 * Port Mapper Protocol Specification (in RPC Language) 45 * derived from RFC 1057 46 */ 47 48%/* 49% * Protocol for the local binder service, or pmap. 50% * 51% * Copyright (C) 1984, Sun Microsystems, Inc. 52% * 53% * The following procedures are supported by the protocol: 54% * 55% * PMAPPROC_NULL() returns () 56% * takes nothing, returns nothing 57% * 58% * PMAPPROC_SET(struct pmap) returns (bool_t) 59% * TRUE is success, FALSE is failure. Registers the tuple 60% * [prog, vers, prot, port]. 61% * 62% * PMAPPROC_UNSET(struct pmap) returns (bool_t) 63% * TRUE is success, FALSE is failure. Un-registers pair 64% * [prog, vers]. prot and port are ignored. 65% * 66% * PMAPPROC_GETPORT(struct pmap) returns (long unsigned). 67% * 0 is failure. Otherwise returns the port number where the pair 68% * [prog, vers] is registered. It may lie! 69% * 70% * PMAPPROC_DUMP() RETURNS (struct pmaplist_ptr) 71% * 72% * PMAPPROC_CALLIT(unsigned, unsigned, unsigned, string<>) 73% * RETURNS (port, string<>); 74% * usage: encapsulatedresults = PMAPPROC_CALLIT(prog, vers, proc, 75% * encapsulatedargs); 76% * Calls the procedure on the local machine. If it is not registered, 77% * this procedure is quite; ie it does not return error information!!! 78% * This procedure only is supported on rpc/udp and calls via 79% * rpc/udp. This routine only passes null authentication parameters. 80% * This file has no interface to xdr routines for PMAPPROC_CALLIT. 81% * 82% * The service supports remote procedure calls on udp/ip or tcp/ip socket 111. 83% */ 84% 85const PMAPPORT = 111; /* portmapper port number */ 86% 87% 88%/* 89% * A mapping of (program, version, protocol) to port number 90% */ 91 92struct pmap { 93 unsigned long pm_prog; 94 unsigned long pm_vers; 95 unsigned long pm_prot; 96 unsigned long pm_port; 97}; 98#ifdef RPC_HDR 99% 100%typedef pmap PMAP; 101% 102#endif 103% 104%/* 105% * Supported values for the "prot" field 106% */ 107% 108const PMAP_IPPROTO_TCP = 6; /* protocol number for TCP/IP */ 109const PMAP_IPPROTO_UDP = 17; /* protocol number for UDP/IP */ 110% 111% 112%/* 113% * A list of mappings 114% * 115% * Below are two definitions for the pmaplist structure. This is done because 116% * xdr_pmaplist() is specified to take a struct pmaplist **, rather than a 117% * struct pmaplist * that rpcgen would produce. One version of the pmaplist 118% * structure (actually called pm__list) is used with rpcgen, and the other is 119% * defined only in the header file for compatibility with the specified 120% * interface. 121% */ 122 123struct pm__list { 124 pmap pml_map; 125 struct pm__list *pml_next; 126}; 127 128typedef pm__list *pmaplist_ptr; /* results of PMAPPROC_DUMP */ 129 130#ifdef RPC_HDR 131% 132%typedef struct pm__list pmaplist; 133%typedef struct pm__list PMAPLIST; 134% 135%#ifndef __cplusplus 136%struct pmaplist { 137% PMAP pml_map; 138% struct pmaplist *pml_next; 139%}; 140%#endif 141% 142%#ifdef __cplusplus 143%extern "C" { 144%#endif 145%#ifdef __STDC__ 146%extern bool_t xdr_pmaplist(XDR *, pmaplist**); 147%#else /* K&R C */ 148%bool_t xdr_pmaplist(); 149%#endif 150%#ifdef __cplusplus 151%} 152%#endif 153% 154#endif 155 156% 157%/* 158% * Arguments to callit 159% */ 160 161struct rmtcallargs { 162 unsigned long prog; 163 unsigned long vers; 164 unsigned long proc; 165 opaque args<>; 166}; 167#ifdef RPC_HDR 168% 169%/* 170% * Client-side only representation of rmtcallargs structure. 171% * 172% * The routine that XDRs the rmtcallargs structure must deal with the 173% * opaque arguments in the "args" structure. xdr_rmtcall_args() needs to be 174% * passed the XDR routine that knows the args' structure. This routine 175% * doesn't need to go over-the-wire (and it wouldn't make sense anyway) since 176% * the application being called knows the args structure already. So we use a 177% * different "XDR" structure on the client side, p_rmtcallargs, which includes 178% * the args' XDR routine. 179% */ 180%struct p_rmtcallargs { 181% u_long prog; 182% u_long vers; 183% u_long proc; 184% struct { 185% u_int args_len; 186% char *args_val; 187% } args; 188% xdrproc_t xdr_args; /* encodes args */ 189%}; 190% 191#endif /* def RPC_HDR */ 192% 193% 194%/* 195% * Results of callit 196% */ 197 198struct rmtcallres { 199 unsigned long port; 200 opaque res<>; 201}; 202#ifdef RPC_HDR 203% 204%/* 205% * Client-side only representation of rmtcallres structure. 206% */ 207%struct p_rmtcallres { 208% u_long port; 209% struct { 210% u_int res_len; 211% char *res_val; 212% } res; 213% xdrproc_t xdr_res; /* decodes res */ 214%}; 215% 216#endif /* def RPC_HDR */ 217 218/* 219 * Port mapper procedures 220 */ 221 222program PMAPPROG { 223 version PMAPVERS { 224 void 225 PMAPPROC_NULL(void) = 0; 226 227 bool 228 PMAPPROC_SET(pmap) = 1; 229 230 bool 231 PMAPPROC_UNSET(pmap) = 2; 232 233 unsigned long 234 PMAPPROC_GETPORT(pmap) = 3; 235 236 pmaplist_ptr 237 PMAPPROC_DUMP(void) = 4; 238 239 rmtcallres 240 PMAPPROC_CALLIT(rmtcallargs) = 5; 241 } = 2; 242} = 100000; 243% 244#ifdef RPC_HDR 245%#define PMAPVERS_PROTO ((u_long)2) 246%#define PMAPVERS_ORIG ((u_long)1) 247% 248%#else /* ndef _KERNEL */ 249% 250%#include <rpc/pmap_rmt.h> 251% 252%#ifdef __cplusplus 253%extern "C" { 254%#endif 255% 256%#define PMAPPORT 111 257% 258%struct pmap { 259% long unsigned pm_prog; 260% long unsigned pm_vers; 261% long unsigned pm_prot; 262% long unsigned pm_port; 263%}; 264%typedef struct pmap PMAP; 265%#ifdef __STDC__ 266%extern bool_t xdr_pmap (XDR *, struct pmap *); 267%#else 268%extern bool_t xdr_pmap (); 269%#endif 270% 271%struct pmaplist { 272% struct pmap pml_map; 273% struct pmaplist *pml_next; 274%}; 275%typedef struct pmaplist PMAPLIST; 276%typedef struct pmaplist *pmaplist_ptr; 277% 278% 279%#ifdef __cplusplus 280%} 281%#endif 282% 283%#endif /* ndef _KERNEL */ 284#endif 285 286