rc.subr revision 286303
1# $NetBSD: rc.subr,v 1.67 2006/10/07 11:25:15 elad Exp $ 2# $FreeBSD: head/etc/rc.subr 286303 2015-08-05 03:03:57Z ngie $ 3# 4# Copyright (c) 1997-2004 The NetBSD Foundation, Inc. 5# All rights reserved. 6# 7# This code is derived from software contributed to The NetBSD Foundation 8# by Luke Mewburn. 9# 10# Redistribution and use in source and binary forms, with or without 11# modification, are permitted provided that the following conditions 12# are met: 13# 1. Redistributions of source code must retain the above copyright 14# notice, this list of conditions and the following disclaimer. 15# 2. Redistributions in binary form must reproduce the above copyright 16# notice, this list of conditions and the following disclaimer in the 17# documentation and/or other materials provided with the distribution. 18# 19# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29# POSSIBILITY OF SUCH DAMAGE. 30# 31# rc.subr 32# functions used by various rc scripts 33# 34 35: ${RC_PID:=$$}; export RC_PID 36 37# 38# Operating System dependent/independent variables 39# 40 41if [ -z "${_rc_subr_loaded}" ]; then 42 43_rc_subr_loaded="YES" 44 45SYSCTL="/sbin/sysctl" 46SYSCTL_N="${SYSCTL} -n" 47SYSCTL_W="${SYSCTL}" 48ID="/usr/bin/id" 49IDCMD="if [ -x $ID ]; then $ID -un; fi" 50PS="/bin/ps -ww" 51JID=`$PS -p $$ -o jid=` 52 53# 54# functions 55# --------- 56 57# list_vars pattern 58# List vars matching pattern. 59# 60list_vars() 61{ 62 set | { while read LINE; do 63 var="${LINE%%=*}" 64 case "$var" in 65 "$LINE"|*[!a-zA-Z0-9_]*) continue ;; 66 $1) echo $var 67 esac 68 done; } 69} 70 71# set_rcvar [var] [defval] [desc] 72# 73# Echo or define a rc.conf(5) variable name. Global variable 74# $rcvars is used. 75# 76# If no argument is specified, echo "${name}_enable". 77# 78# If only a var is specified, echo "${var}_enable". 79# 80# If var and defval are specified, the ${var} is defined as 81# rc.conf(5) variable and the default value is ${defvar}. An 82# optional argument $desc can also be specified to add a 83# description for that. 84# 85set_rcvar() 86{ 87 local _var 88 89 case $# in 90 0) echo ${name}_enable ;; 91 1) echo ${1}_enable ;; 92 *) 93 debug "set_rcvar: \$$1=$2 is added" \ 94 " as a rc.conf(5) variable." 95 _var=$1 96 rcvars="${rcvars# } $_var" 97 eval ${_var}_defval=\"$2\" 98 shift 2 99 eval ${_var}_desc=\"$*\" 100 ;; 101 esac 102} 103 104# set_rcvar_obsolete oldvar [newvar] [msg] 105# Define obsolete variable. 106# Global variable $rcvars_obsolete is used. 107# 108set_rcvar_obsolete() 109{ 110 local _var 111 _var=$1 112 debug "set_rcvar_obsolete: \$$1(old) -> \$$2(new) is defined" 113 114 rcvars_obsolete="${rcvars_obsolete# } $1" 115 eval ${1}_newvar=\"$2\" 116 shift 2 117 eval ${_var}_obsolete_msg=\"$*\" 118} 119 120# 121# force_depend script [rcvar] 122# Force a service to start. Intended for use by services 123# to resolve dependency issues. 124# $1 - filename of script, in /etc/rc.d, to run 125# $2 - name of the script's rcvar (minus the _enable) 126# 127force_depend() 128{ 129 local _depend _dep_rcvar 130 131 _depend="$1" 132 _dep_rcvar="${2:-$1}_enable" 133 134 [ -n "$rc_fast" ] && ! checkyesno always_force_depends && 135 checkyesno $_dep_rcvar && return 0 136 137 /etc/rc.d/${_depend} forcestatus >/dev/null 2>&1 && return 0 138 139 info "${name} depends on ${_depend}, which will be forced to start." 140 if ! /etc/rc.d/${_depend} forcestart; then 141 warn "Unable to force ${_depend}. It may already be running." 142 return 1 143 fi 144} 145 146# 147# checkyesno var 148# Test $1 variable, and warn if not set to YES or NO. 149# Return 0 if it's "yes" (et al), nonzero otherwise. 150# 151checkyesno() 152{ 153 eval _value=\$${1} 154 debug "checkyesno: $1 is set to $_value." 155 case $_value in 156 157 # "yes", "true", "on", or "1" 158 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 159 return 0 160 ;; 161 162 # "no", "false", "off", or "0" 163 [Nn][Oo]|[Ff][Aa][Ll][Ss][Ee]|[Oo][Ff][Ff]|0) 164 return 1 165 ;; 166 *) 167 warn "\$${1} is not set properly - see rc.conf(5)." 168 return 1 169 ;; 170 esac 171} 172 173# 174# reverse_list list 175# print the list in reverse order 176# 177reverse_list() 178{ 179 _revlist= 180 for _revfile; do 181 _revlist="$_revfile $_revlist" 182 done 183 echo $_revlist 184} 185 186# stop_boot always 187# If booting directly to multiuser or $always is enabled, 188# send SIGTERM to the parent (/etc/rc) to abort the boot. 189# Otherwise just exit. 190# 191stop_boot() 192{ 193 local always 194 195 case $1 in 196 # "yes", "true", "on", or "1" 197 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 198 always=true 199 ;; 200 *) 201 always=false 202 ;; 203 esac 204 if [ "$autoboot" = yes -o "$always" = true ]; then 205 echo "ERROR: ABORTING BOOT (sending SIGTERM to parent)!" 206 kill -TERM ${RC_PID} 207 fi 208 exit 1 209} 210 211# 212# mount_critical_filesystems type 213# Go through the list of critical filesystems as provided in 214# the rc.conf(5) variable $critical_filesystems_${type}, checking 215# each one to see if it is mounted, and if it is not, mounting it. 216# 217mount_critical_filesystems() 218{ 219 eval _fslist=\$critical_filesystems_${1} 220 for _fs in $_fslist; do 221 mount | ( 222 _ismounted=false 223 while read what _on on _type type; do 224 if [ $on = $_fs ]; then 225 _ismounted=true 226 fi 227 done 228 if $_ismounted; then 229 : 230 else 231 mount $_fs >/dev/null 2>&1 232 fi 233 ) 234 done 235} 236 237# 238# check_pidfile pidfile procname [interpreter] 239# Parses the first line of pidfile for a PID, and ensures 240# that the process is running and matches procname. 241# Prints the matching PID upon success, nothing otherwise. 242# interpreter is optional; see _find_processes() for details. 243# 244check_pidfile() 245{ 246 _pidfile=$1 247 _procname=$2 248 _interpreter=$3 249 if [ -z "$_pidfile" -o -z "$_procname" ]; then 250 err 3 'USAGE: check_pidfile pidfile procname [interpreter]' 251 fi 252 if [ ! -f $_pidfile ]; then 253 debug "pid file ($_pidfile): not readable." 254 return 255 fi 256 read _pid _junk < $_pidfile 257 if [ -z "$_pid" ]; then 258 debug "pid file ($_pidfile): no pid in file." 259 return 260 fi 261 _find_processes $_procname ${_interpreter:-.} '-p '"$_pid" 262} 263 264# 265# check_process procname [interpreter] 266# Ensures that a process (or processes) named procname is running. 267# Prints a list of matching PIDs. 268# interpreter is optional; see _find_processes() for details. 269# 270check_process() 271{ 272 _procname=$1 273 _interpreter=$2 274 if [ -z "$_procname" ]; then 275 err 3 'USAGE: check_process procname [interpreter]' 276 fi 277 _find_processes $_procname ${_interpreter:-.} '-ax' 278} 279 280# 281# _find_processes procname interpreter psargs 282# Search for procname in the output of ps generated by psargs. 283# Prints the PIDs of any matching processes, space separated. 284# 285# If interpreter == ".", check the following variations of procname 286# against the first word of each command: 287# procname 288# `basename procname` 289# `basename procname` + ":" 290# "(" + `basename procname` + ")" 291# "[" + `basename procname` + "]" 292# 293# If interpreter != ".", read the first line of procname, remove the 294# leading #!, normalise whitespace, append procname, and attempt to 295# match that against each command, either as is, or with extra words 296# at the end. As an alternative, to deal with interpreted daemons 297# using perl, the basename of the interpreter plus a colon is also 298# tried as the prefix to procname. 299# 300_find_processes() 301{ 302 if [ $# -ne 3 ]; then 303 err 3 'USAGE: _find_processes procname interpreter psargs' 304 fi 305 _procname=$1 306 _interpreter=$2 307 _psargs=$3 308 309 _pref= 310 if [ $_interpreter != "." ]; then # an interpreted script 311 _script="${_chroot}${_chroot:+/}$_procname" 312 if [ -r "$_script" ]; then 313 read _interp < $_script # read interpreter name 314 case "$_interp" in 315 \#!*) 316 _interp=${_interp#\#!} # strip #! 317 set -- $_interp 318 case $1 in 319 */bin/env) 320 shift # drop env to get real name 321 ;; 322 esac 323 if [ $_interpreter != $1 ]; then 324 warn "\$command_interpreter $_interpreter != $1" 325 fi 326 ;; 327 *) 328 warn "no shebang line in $_script" 329 set -- $_interpreter 330 ;; 331 esac 332 else 333 warn "cannot read shebang line from $_script" 334 set -- $_interpreter 335 fi 336 _interp="$* $_procname" # cleanup spaces, add _procname 337 _interpbn=${1##*/} 338 _fp_args='_argv' 339 _fp_match='case "$_argv" in 340 ${_interp}|"${_interp} "*|"[${_interpbn}]"|"${_interpbn}: ${_procname}"*)' 341 else # a normal daemon 342 _procnamebn=${_procname##*/} 343 _fp_args='_arg0 _argv' 344 _fp_match='case "$_arg0" in 345 $_procname|$_procnamebn|${_procnamebn}:|"(${_procnamebn})"|"[${_procnamebn}]")' 346 fi 347 348 _proccheck="\ 349 $PS 2>/dev/null -o pid= -o jid= -o command= $_psargs"' | 350 while read _npid _jid '"$_fp_args"'; do 351 '"$_fp_match"' 352 if [ "$JID" -eq "$_jid" ]; 353 then echo -n "$_pref$_npid"; 354 _pref=" "; 355 fi 356 ;; 357 esac 358 done' 359 360# debug "in _find_processes: proccheck is ($_proccheck)." 361 eval $_proccheck 362} 363 364# sort_lite [-b] [-n] [-k POS] [-t SEP] 365# A lite version of sort(1) (supporting a few options) that can be used 366# before the real sort(1) is available (e.g., in scripts that run prior 367# to mountcritremote). Requires only shell built-in functionality. 368# 369sort_lite() 370{ 371 local funcname=sort_lite 372 local sort_sep="$IFS" sort_ignore_leading_space= 373 local sort_field=0 sort_strict_fields= sort_numeric= 374 local nitems=0 skip_leading=0 trim= 375 376 local OPTIND flag 377 while getopts bnk:t: flag; do 378 case "$flag" in 379 b) sort_ignore_leading_space=1 ;; 380 n) sort_numeric=1 sort_ignore_leading_space=1 ;; 381 k) sort_field="${OPTARG%%,*}" ;; # only up to first comma 382 # NB: Unlike sort(1) only one POS allowed 383 t) sort_sep="$OPTARG" 384 if [ ${#sort_sep} -gt 1 ]; then 385 echo "$funcname: multi-character tab \`$sort_sep'" >&2 386 return 1 387 fi 388 sort_strict_fields=1 389 ;; 390 \?) return 1 ;; 391 esac 392 done 393 shift $(( $OPTIND - 1 )) 394 395 # Create transformation pattern to trim leading text if desired 396 case "$sort_field" in 397 ""|[!0-9]*|*[!0-9.]*) 398 echo "$funcname: invalid sort field \`$sort_field'" >&2 399 return 1 400 ;; 401 *.*) 402 skip_leading=${sort_field#*.} sort_field=${sort_field%%.*} 403 while [ ${skip_leading:-0} -gt 1 ] 2> /dev/null; do 404 trim="$trim?" skip_leading=$(( $skip_leading - 1 )) 405 done 406 esac 407 408 # Copy input to series of local numbered variables 409 # NB: IFS of NULL preserves leading whitespace 410 local LINE 411 while IFS= read -r LINE || [ "$LINE" ]; do 412 nitems=$(( $nitems + 1 )) 413 local src_$nitems="$LINE" 414 done 415 416 # 417 # Sort numbered locals using insertion sort 418 # 419 local curitem curitem_orig curitem_mod curitem_haskey 420 local dest dest_orig dest_mod dest_haskey 421 local d gt n 422 local i=1 423 while [ $i -le $nitems ]; do 424 curitem_haskey=1 # Assume sort field (-k POS) exists 425 eval curitem=\"\$src_$i\" 426 curitem_mod="$curitem" # for modified comparison 427 curitem_orig="$curitem" # for original comparison 428 429 # Trim leading whitespace if desired 430 if [ "$sort_ignore_leading_space" ]; then 431 while case "$curitem_orig" in 432 [$IFS]*) : ;; *) false; esac 433 do 434 curitem_orig="${curitem_orig#?}" 435 done 436 curitem_mod="$curitem_orig" 437 fi 438 439 # Shift modified comparison value if sort field (-k POS) is > 1 440 n=$sort_field 441 while [ $n -gt 1 ]; do 442 case "$curitem_mod" in 443 *[$sort_sep]*) 444 # Cut text up-to (and incl.) first separator 445 curitem_mod="${curitem_mod#*[$sort_sep]}" 446 447 # Skip NULLs unless strict field splitting 448 [ "$sort_strict_fields" ] || 449 [ "${curitem_mod%%[$sort_sep]*}" ] || 450 [ $n -eq 2 ] || 451 continue 452 ;; 453 *) 454 # Asked for a field that doesn't exist 455 curitem_haskey= break 456 esac 457 n=$(( $n - 1 )) 458 done 459 460 # Trim trailing words if sort field >= 1 461 [ $sort_field -ge 1 -a "$sort_numeric" ] && 462 curitem_mod="${curitem_mod%%[$sort_sep]*}" 463 464 # Apply optional trim (-k POS.TRIM) to cut leading characters 465 curitem_mod="${curitem_mod#$trim}" 466 467 # Determine the type of modified comparison to use initially 468 # NB: Prefer numerical if requested but fallback to standard 469 case "$curitem_mod" in 470 ""|[!0-9]*) # NULL or begins with non-number 471 gt=">" 472 [ "$sort_numeric" ] && curitem_mod=0 473 ;; 474 *) 475 if [ "$sort_numeric" ]; then 476 gt="-gt" 477 curitem_mod="${curitem_mod%%[!0-9]*}" 478 # NB: trailing non-digits removed 479 # otherwise numeric comparison fails 480 else 481 gt=">" 482 fi 483 esac 484 485 # If first time through, short-circuit below position-search 486 if [ $i -le 1 ]; then 487 d=0 488 else 489 d=1 490 fi 491 492 # 493 # Find appropriate element position 494 # 495 while [ $d -gt 0 ] 496 do 497 dest_haskey=$curitem_haskey 498 eval dest=\"\$dest_$d\" 499 dest_mod="$dest" # for modified comparison 500 dest_orig="$dest" # for original comparison 501 502 # Trim leading whitespace if desired 503 if [ "$sort_ignore_leading_space" ]; then 504 while case "$dest_orig" in 505 [$IFS]*) : ;; *) false; esac 506 do 507 dest_orig="${dest_orig#?}" 508 done 509 dest_mod="$dest_orig" 510 fi 511 512 # Shift modified value if sort field (-k POS) is > 1 513 n=$sort_field 514 while [ $n -gt 1 ]; do 515 case "$dest_mod" in 516 *[$sort_sep]*) 517 # Cut text up-to (and incl.) 1st sep 518 dest_mod="${dest_mod#*[$sort_sep]}" 519 520 # Skip NULLs unless strict fields 521 [ "$sort_strict_fields" ] || 522 [ "${dest_mod%%[$sort_sep]*}" ] || 523 [ $n -eq 2 ] || 524 continue 525 ;; 526 *) 527 # Asked for a field that doesn't exist 528 dest_haskey= break 529 esac 530 n=$(( $n - 1 )) 531 done 532 533 # Trim trailing words if sort field >= 1 534 [ $sort_field -ge 1 -a "$sort_numeric" ] && 535 dest_mod="${dest_mod%%[$sort_sep]*}" 536 537 # Apply optional trim (-k POS.TRIM), cut leading chars 538 dest_mod="${dest_mod#$trim}" 539 540 # Determine type of modified comparison to use 541 # NB: Prefer numerical if requested, fallback to std 542 case "$dest_mod" in 543 ""|[!0-9]*) # NULL or begins with non-number 544 gt=">" 545 [ "$sort_numeric" ] && dest_mod=0 546 ;; 547 *) 548 if [ "$sort_numeric" ]; then 549 gt="-gt" 550 dest_mod="${dest_mod%%[!0-9]*}" 551 # NB: kill trailing non-digits 552 # for numeric comparison safety 553 else 554 gt=">" 555 fi 556 esac 557 558 # Break if we've found the proper element position 559 if [ "$curitem_haskey" -a "$dest_haskey" ]; then 560 if [ "$dest_mod" = "$curitem_mod" ]; then 561 [ "$dest_orig" ">" "$curitem_orig" ] && 562 break 563 elif [ "$dest_mod" $gt "$curitem_mod" ] \ 564 2> /dev/null 565 then 566 break 567 fi 568 else 569 [ "$dest_orig" ">" "$curitem_orig" ] && break 570 fi 571 572 # Break if we've hit the end 573 [ $d -ge $i ] && break 574 575 d=$(( $d + 1 )) 576 done 577 578 # Shift remaining positions forward, making room for new item 579 n=$i 580 while [ $n -ge $d ]; do 581 # Shift destination item forward one placement 582 eval dest_$(( $n + 1 ))=\"\$dest_$n\" 583 n=$(( $n - 1 )) 584 done 585 586 # Place the element 587 if [ $i -eq 1 ]; then 588 local dest_1="$curitem" 589 else 590 local dest_$d="$curitem" 591 fi 592 593 i=$(( $i + 1 )) 594 done 595 596 # Print sorted results 597 d=1 598 while [ $d -le $nitems ]; do 599 eval echo \"\$dest_$d\" 600 d=$(( $d + 1 )) 601 done 602} 603 604# 605# wait_for_pids pid [pid ...] 606# spins until none of the pids exist 607# 608wait_for_pids() 609{ 610 local _list _prefix _nlist _j 611 612 _list="$@" 613 if [ -z "$_list" ]; then 614 return 615 fi 616 _prefix= 617 while true; do 618 _nlist=""; 619 for _j in $_list; do 620 if kill -0 $_j 2>/dev/null; then 621 _nlist="${_nlist}${_nlist:+ }$_j" 622 [ -n "$_prefix" ] && sleep 1 623 fi 624 done 625 if [ -z "$_nlist" ]; then 626 break 627 fi 628 _list=$_nlist 629 echo -n ${_prefix:-"Waiting for PIDS: "}$_list 630 _prefix=", " 631 pwait $_list 2>/dev/null 632 done 633 if [ -n "$_prefix" ]; then 634 echo "." 635 fi 636} 637 638# 639# get_pidfile_from_conf string file 640# 641# Takes a string to search for in the specified file. 642# Ignores lines with traditional comment characters. 643# 644# Example: 645# 646# if get_pidfile_from_conf string file; then 647# pidfile="$_pidfile_from_conf" 648# else 649# pidfile='appropriate default' 650# fi 651# 652get_pidfile_from_conf() 653{ 654 if [ -z "$1" -o -z "$2" ]; then 655 err 3 "USAGE: get_pidfile_from_conf string file ($name)" 656 fi 657 658 local string file line 659 660 string="$1" ; file="$2" 661 662 if [ ! -s "$file" ]; then 663 err 3 "get_pidfile_from_conf: $file does not exist ($name)" 664 fi 665 666 while read line; do 667 case "$line" in 668 *[#\;]*${string}*) continue ;; 669 *${string}*) break ;; 670 esac 671 done < $file 672 673 if [ -n "$line" ]; then 674 line=${line#*/} 675 _pidfile_from_conf="/${line%%[\"\;]*}" 676 else 677 return 1 678 fi 679} 680 681# 682# check_startmsgs 683# If rc_quiet is set (usually as a result of using faststart at 684# boot time) check if rc_startmsgs is enabled. 685# 686check_startmsgs() 687{ 688 if [ -n "$rc_quiet" ]; then 689 checkyesno rc_startmsgs 690 else 691 return 0 692 fi 693} 694 695# 696# run_rc_command argument 697# Search for argument in the list of supported commands, which is: 698# "start stop restart rcvar status poll ${extra_commands}" 699# If there's a match, run ${argument}_cmd or the default method 700# (see below). 701# 702# If argument has a given prefix, then change the operation as follows: 703# Prefix Operation 704# ------ --------- 705# fast Skip the pid check, and set rc_fast=yes, rc_quiet=yes 706# force Set ${rcvar} to YES, and set rc_force=yes 707# one Set ${rcvar} to YES 708# quiet Don't output some diagnostics, and set rc_quiet=yes 709# 710# The following globals are used: 711# 712# Name Needed Purpose 713# ---- ------ ------- 714# name y Name of script. 715# 716# command n Full path to command. 717# Not needed if ${rc_arg}_cmd is set for 718# each keyword. 719# 720# command_args n Optional args/shell directives for command. 721# 722# command_interpreter n If not empty, command is interpreted, so 723# call check_{pidfile,process}() appropriately. 724# 725# desc n Description of script. 726# 727# extra_commands n List of extra commands supported. 728# 729# pidfile n If set, use check_pidfile $pidfile $command, 730# otherwise use check_process $command. 731# In either case, only check if $command is set. 732# 733# procname n Process name to check for instead of $command. 734# 735# rcvar n This is checked with checkyesno to determine 736# if the action should be run. 737# 738# ${name}_program n Full path to command. 739# Meant to be used in /etc/rc.conf to override 740# ${command}. 741# 742# ${name}_chroot n Directory to chroot to before running ${command} 743# Requires /usr to be mounted. 744# 745# ${name}_chdir n Directory to cd to before running ${command} 746# (if not using ${name}_chroot). 747# 748# ${name}_flags n Arguments to call ${command} with. 749# NOTE: $flags from the parent environment 750# can be used to override this. 751# 752# ${name}_env n Environment variables to run ${command} with. 753# 754# ${name}_fib n Routing table number to run ${command} with. 755# 756# ${name}_nice n Nice level to run ${command} at. 757# 758# ${name}_user n User to run ${command} as, using su(1) if not 759# using ${name}_chroot. 760# Requires /usr to be mounted. 761# 762# ${name}_group n Group to run chrooted ${command} as. 763# Requires /usr to be mounted. 764# 765# ${name}_groups n Comma separated list of supplementary groups 766# to run the chrooted ${command} with. 767# Requires /usr to be mounted. 768# 769# ${name}_prepend n Command added before ${command}. 770# 771# ${rc_arg}_cmd n If set, use this as the method when invoked; 772# Otherwise, use default command (see below) 773# 774# ${rc_arg}_precmd n If set, run just before performing the 775# ${rc_arg}_cmd method in the default 776# operation (i.e, after checking for required 777# bits and process (non)existence). 778# If this completes with a non-zero exit code, 779# don't run ${rc_arg}_cmd. 780# 781# ${rc_arg}_postcmd n If set, run just after performing the 782# ${rc_arg}_cmd method, if that method 783# returned a zero exit code. 784# 785# required_dirs n If set, check for the existence of the given 786# directories before running a (re)start command. 787# 788# required_files n If set, check for the readability of the given 789# files before running a (re)start command. 790# 791# required_modules n If set, ensure the given kernel modules are 792# loaded before running a (re)start command. 793# The check and possible loads are actually 794# done after start_precmd so that the modules 795# aren't loaded in vain, should the precmd 796# return a non-zero status to indicate a error. 797# If a word in the list looks like "foo:bar", 798# "foo" is the KLD file name and "bar" is the 799# module name. If a word looks like "foo~bar", 800# "foo" is the KLD file name and "bar" is a 801# egrep(1) pattern matching the module name. 802# Otherwise the module name is assumed to be 803# the same as the KLD file name, which is most 804# common. See load_kld(). 805# 806# required_vars n If set, perform checkyesno on each of the 807# listed variables before running the default 808# (re)start command. 809# 810# Default behaviour for a given argument, if no override method is 811# provided: 812# 813# Argument Default behaviour 814# -------- ----------------- 815# start if !running && checkyesno ${rcvar} 816# ${command} 817# 818# stop if ${pidfile} 819# rc_pid=$(check_pidfile $pidfile $command) 820# else 821# rc_pid=$(check_process $command) 822# kill $sig_stop $rc_pid 823# wait_for_pids $rc_pid 824# ($sig_stop defaults to TERM.) 825# 826# reload Similar to stop, except use $sig_reload instead, 827# and doesn't wait_for_pids. 828# $sig_reload defaults to HUP. 829# Note that `reload' isn't provided by default, 830# it should be enabled via $extra_commands. 831# 832# restart Run `stop' then `start'. 833# 834# status Show if ${command} is running, etc. 835# 836# poll Wait for ${command} to exit. 837# 838# rcvar Display what rc.conf variable is used (if any). 839# 840# enabled Return true if the service is enabled. 841# 842# Variables available to methods, and after run_rc_command() has 843# completed: 844# 845# Variable Purpose 846# -------- ------- 847# rc_arg Argument to command, after fast/force/one processing 848# performed 849# 850# rc_flags Flags to start the default command with. 851# Defaults to ${name}_flags, unless overridden 852# by $flags from the environment. 853# This variable may be changed by the precmd method. 854# 855# rc_pid PID of command (if appropriate) 856# 857# rc_fast Not empty if "fast" was provided (q.v.) 858# 859# rc_force Not empty if "force" was provided (q.v.) 860# 861# rc_quiet Not empty if "quiet" was provided 862# 863# 864run_rc_command() 865{ 866 _return=0 867 rc_arg=$1 868 if [ -z "$name" ]; then 869 err 3 'run_rc_command: $name is not set.' 870 fi 871 872 # Don't repeat the first argument when passing additional command- 873 # line arguments to the command subroutines. 874 # 875 shift 1 876 rc_extra_args="$*" 877 878 _rc_prefix= 879 case "$rc_arg" in 880 fast*) # "fast" prefix; don't check pid 881 rc_arg=${rc_arg#fast} 882 rc_fast=yes 883 rc_quiet=yes 884 ;; 885 force*) # "force" prefix; always run 886 rc_force=yes 887 _rc_prefix=force 888 rc_arg=${rc_arg#${_rc_prefix}} 889 if [ -n "${rcvar}" ]; then 890 eval ${rcvar}=YES 891 fi 892 ;; 893 one*) # "one" prefix; set ${rcvar}=yes 894 _rc_prefix=one 895 rc_arg=${rc_arg#${_rc_prefix}} 896 if [ -n "${rcvar}" ]; then 897 eval ${rcvar}=YES 898 fi 899 ;; 900 quiet*) # "quiet" prefix; omit some messages 901 _rc_prefix=quiet 902 rc_arg=${rc_arg#${_rc_prefix}} 903 rc_quiet=yes 904 ;; 905 esac 906 907 eval _override_command=\$${name}_program 908 command=${_override_command:-$command} 909 910 _keywords="start stop restart rcvar enabled $extra_commands" 911 rc_pid= 912 _pidcmd= 913 _procname=${procname:-${command}} 914 915 # setup pid check command 916 if [ -n "$_procname" ]; then 917 if [ -n "$pidfile" ]; then 918 _pidcmd='rc_pid=$(check_pidfile '"$pidfile $_procname $command_interpreter"')' 919 else 920 _pidcmd='rc_pid=$(check_process '"$_procname $command_interpreter"')' 921 fi 922 if [ -n "$_pidcmd" ]; then 923 _keywords="${_keywords} status poll" 924 fi 925 fi 926 927 if [ -z "$rc_arg" ]; then 928 rc_usage $_keywords 929 fi 930 931 if [ "$rc_arg" = "enabled" ] ; then 932 checkyesno ${rcvar} 933 return $? 934 fi 935 936 if [ -n "$flags" ]; then # allow override from environment 937 rc_flags=$flags 938 else 939 eval rc_flags=\$${name}_flags 940 fi 941 eval _chdir=\$${name}_chdir _chroot=\$${name}_chroot \ 942 _nice=\$${name}_nice _user=\$${name}_user \ 943 _group=\$${name}_group _groups=\$${name}_groups \ 944 _fib=\$${name}_fib _env=\$${name}_env \ 945 _prepend=\$${name}_prepend 946 947 if [ -n "$_user" ]; then # unset $_user if running as that user 948 if [ "$_user" = "$(eval $IDCMD)" ]; then 949 unset _user 950 fi 951 fi 952 953 [ -z "$autoboot" ] && eval $_pidcmd # determine the pid if necessary 954 955 for _elem in $_keywords; do 956 if [ "$_elem" != "$rc_arg" ]; then 957 continue 958 fi 959 # if ${rcvar} is set, $1 is not "rcvar" 960 # and ${rc_pid} is not set, then run 961 # checkyesno ${rcvar} 962 # and return if that failed 963 # 964 if [ -n "${rcvar}" -a "$rc_arg" != "rcvar" -a "$rc_arg" != "stop" ] || 965 [ -n "${rcvar}" -a "$rc_arg" = "stop" -a -z "${rc_pid}" ]; then 966 if ! checkyesno ${rcvar}; then 967 if [ -n "${rc_quiet}" ]; then 968 return 0 969 fi 970 echo -n "Cannot '${rc_arg}' $name. Set ${rcvar} to " 971 echo -n "YES in /etc/rc.conf or use 'one${rc_arg}' " 972 echo "instead of '${rc_arg}'." 973 return 0 974 fi 975 fi 976 977 # if there's a custom ${XXX_cmd}, 978 # run that instead of the default 979 # 980 eval _cmd=\$${rc_arg}_cmd \ 981 _precmd=\$${rc_arg}_precmd \ 982 _postcmd=\$${rc_arg}_postcmd 983 984 if [ -n "$_cmd" ]; then 985 _run_rc_precmd || return 1 986 _run_rc_doit "$_cmd $rc_extra_args" || return 1 987 _run_rc_postcmd 988 return $_return 989 fi 990 991 case "$rc_arg" in # default operations... 992 993 status) 994 _run_rc_precmd || return 1 995 if [ -n "$rc_pid" ]; then 996 echo "${name} is running as pid $rc_pid." 997 else 998 echo "${name} is not running." 999 return 1 1000 fi 1001 _run_rc_postcmd 1002 ;; 1003 1004 start) 1005 if [ -z "$rc_fast" -a -n "$rc_pid" ]; then 1006 if [ -z "$rc_quiet" ]; then 1007 echo 1>&2 "${name} already running? " \ 1008 "(pid=$rc_pid)." 1009 fi 1010 return 1 1011 fi 1012 1013 if [ ! -x "${_chroot}${_chroot:+/}${command}" ]; then 1014 warn "run_rc_command: cannot run $command" 1015 return 1 1016 fi 1017 1018 if ! _run_rc_precmd; then 1019 warn "failed precmd routine for ${name}" 1020 return 1 1021 fi 1022 1023 # setup the full command to run 1024 # 1025 check_startmsgs && echo "Starting ${name}." 1026 if [ -n "$_chroot" ]; then 1027 _doit="\ 1028${_nice:+nice -n $_nice }\ 1029${_fib:+setfib -F $_fib }\ 1030${_env:+env $_env }\ 1031chroot ${_user:+-u $_user }${_group:+-g $_group }${_groups:+-G $_groups }\ 1032$_chroot $command $rc_flags $command_args" 1033 else 1034 _doit="\ 1035${_chdir:+cd $_chdir && }\ 1036${_fib:+setfib -F $_fib }\ 1037${_env:+env $_env }\ 1038$command $rc_flags $command_args" 1039 if [ -n "$_user" ]; then 1040 _doit="su -m $_user -c 'sh -c \"$_doit\"'" 1041 fi 1042 if [ -n "$_nice" ]; then 1043 if [ -z "$_user" ]; then 1044 _doit="sh -c \"$_doit\"" 1045 fi 1046 _doit="nice -n $_nice $_doit" 1047 fi 1048 if [ -n "$_prepend" ]; then 1049 _doit="$_prepend $_doit" 1050 fi 1051 fi 1052 1053 # run the full command 1054 # 1055 if ! _run_rc_doit "$_doit"; then 1056 warn "failed to start ${name}" 1057 return 1 1058 fi 1059 1060 # finally, run postcmd 1061 # 1062 _run_rc_postcmd 1063 ;; 1064 1065 stop) 1066 if [ -z "$rc_pid" ]; then 1067 [ -n "$rc_fast" ] && return 0 1068 _run_rc_notrunning 1069 return 1 1070 fi 1071 1072 _run_rc_precmd || return 1 1073 1074 # send the signal to stop 1075 # 1076 echo "Stopping ${name}." 1077 _doit=$(_run_rc_killcmd "${sig_stop:-TERM}") 1078 _run_rc_doit "$_doit" || return 1 1079 1080 # wait for the command to exit, 1081 # and run postcmd. 1082 wait_for_pids $rc_pid 1083 1084 _run_rc_postcmd 1085 ;; 1086 1087 reload) 1088 if [ -z "$rc_pid" ]; then 1089 _run_rc_notrunning 1090 return 1 1091 fi 1092 1093 _run_rc_precmd || return 1 1094 1095 _doit=$(_run_rc_killcmd "${sig_reload:-HUP}") 1096 _run_rc_doit "$_doit" || return 1 1097 1098 _run_rc_postcmd 1099 ;; 1100 1101 restart) 1102 # prevent restart being called more 1103 # than once by any given script 1104 # 1105 if ${_rc_restart_done:-false}; then 1106 return 0 1107 fi 1108 _rc_restart_done=true 1109 1110 _run_rc_precmd || return 1 1111 1112 # run those in a subshell to keep global variables 1113 ( run_rc_command ${_rc_prefix}stop $rc_extra_args ) 1114 ( run_rc_command ${_rc_prefix}start $rc_extra_args ) 1115 _return=$? 1116 [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 1117 1118 _run_rc_postcmd 1119 ;; 1120 1121 poll) 1122 _run_rc_precmd || return 1 1123 if [ -n "$rc_pid" ]; then 1124 wait_for_pids $rc_pid 1125 fi 1126 _run_rc_postcmd 1127 ;; 1128 1129 rcvar) 1130 echo -n "# $name" 1131 if [ -n "$desc" ]; then 1132 echo " : $desc" 1133 else 1134 echo "" 1135 fi 1136 echo "#" 1137 # Get unique vars in $rcvar $rcvars 1138 for _v in $rcvar $rcvars; do 1139 case $v in 1140 $_v\ *|\ *$_v|*\ $_v\ *) ;; 1141 *) v="${v# } $_v" ;; 1142 esac 1143 done 1144 1145 # Display variables. 1146 for _v in $v; do 1147 if [ -z "$_v" ]; then 1148 continue 1149 fi 1150 1151 eval _desc=\$${_v}_desc 1152 eval _defval=\$${_v}_defval 1153 _h="-" 1154 1155 eval echo \"$_v=\\\"\$$_v\\\"\" 1156 # decode multiple lines of _desc 1157 while [ -n "$_desc" ]; do 1158 case $_desc in 1159 *^^*) 1160 echo "# $_h ${_desc%%^^*}" 1161 _desc=${_desc#*^^} 1162 _h=" " 1163 ;; 1164 *) 1165 echo "# $_h ${_desc}" 1166 break 1167 ;; 1168 esac 1169 done 1170 echo "# (default: \"$_defval\")" 1171 done 1172 echo "" 1173 ;; 1174 1175 *) 1176 rc_usage $_keywords 1177 ;; 1178 1179 esac 1180 return $_return 1181 done 1182 1183 echo 1>&2 "$0: unknown directive '$rc_arg'." 1184 rc_usage $_keywords 1185 # not reached 1186} 1187 1188# 1189# Helper functions for run_rc_command: common code. 1190# They use such global variables besides the exported rc_* ones: 1191# 1192# name R/W 1193# ------------------ 1194# _precmd R 1195# _postcmd R 1196# _return W 1197# 1198_run_rc_precmd() 1199{ 1200 check_required_before "$rc_arg" || return 1 1201 1202 if [ -n "$_precmd" ]; then 1203 debug "run_rc_command: ${rc_arg}_precmd: $_precmd $rc_extra_args" 1204 eval "$_precmd $rc_extra_args" 1205 _return=$? 1206 1207 # If precmd failed and force isn't set, request exit. 1208 if [ $_return -ne 0 ] && [ -z "$rc_force" ]; then 1209 return 1 1210 fi 1211 fi 1212 1213 check_required_after "$rc_arg" || return 1 1214 1215 return 0 1216} 1217 1218_run_rc_postcmd() 1219{ 1220 if [ -n "$_postcmd" ]; then 1221 debug "run_rc_command: ${rc_arg}_postcmd: $_postcmd $rc_extra_args" 1222 eval "$_postcmd $rc_extra_args" 1223 _return=$? 1224 fi 1225 return 0 1226} 1227 1228_run_rc_doit() 1229{ 1230 debug "run_rc_command: doit: $*" 1231 eval "$@" 1232 _return=$? 1233 1234 # If command failed and force isn't set, request exit. 1235 if [ $_return -ne 0 ] && [ -z "$rc_force" ]; then 1236 return 1 1237 fi 1238 1239 return 0 1240} 1241 1242_run_rc_notrunning() 1243{ 1244 local _pidmsg 1245 1246 if [ -n "$pidfile" ]; then 1247 _pidmsg=" (check $pidfile)." 1248 else 1249 _pidmsg= 1250 fi 1251 echo 1>&2 "${name} not running?${_pidmsg}" 1252} 1253 1254_run_rc_killcmd() 1255{ 1256 local _cmd 1257 1258 _cmd="kill -$1 $rc_pid" 1259 if [ -n "$_user" ]; then 1260 _cmd="su -m ${_user} -c 'sh -c \"${_cmd}\"'" 1261 fi 1262 echo "$_cmd" 1263} 1264 1265# 1266# run_rc_script file arg 1267# Start the script `file' with `arg', and correctly handle the 1268# return value from the script. 1269# If `file' ends with `.sh' and lives in /etc/rc.d, ignore it as it's 1270# an old-style startup file. 1271# If `file' ends with `.sh' and does not live in /etc/rc.d, it's sourced 1272# into the current environment if $rc_fast_and_loose is set; otherwise 1273# it is run as a child process. 1274# If `file' appears to be a backup or scratch file, ignore it. 1275# Otherwise if it is executable run as a child process. 1276# 1277run_rc_script() 1278{ 1279 _file=$1 1280 _arg=$2 1281 if [ -z "$_file" -o -z "$_arg" ]; then 1282 err 3 'USAGE: run_rc_script file arg' 1283 fi 1284 1285 unset name command command_args command_interpreter \ 1286 extra_commands pidfile procname \ 1287 rcvar rcvars rcvars_obsolete required_dirs required_files \ 1288 required_vars 1289 eval unset ${_arg}_cmd ${_arg}_precmd ${_arg}_postcmd 1290 1291 case "$_file" in 1292 /etc/rc.d/*.sh) # no longer allowed in the base 1293 warn "Ignoring old-style startup script $_file" 1294 ;; 1295 *[~#]|*.OLD|*.bak|*.orig|*,v) # scratch file; skip 1296 warn "Ignoring scratch file $_file" 1297 ;; 1298 *) # run in subshell 1299 if [ -x $_file ]; then 1300 if [ -n "$rc_fast_and_loose" ]; then 1301 set $_arg; . $_file 1302 else 1303 ( trap "echo Script $_file interrupted >&2 ; kill -QUIT $$" 3 1304 trap "echo Script $_file interrupted >&2 ; exit 1" 2 1305 trap "echo Script $_file running >&2" 29 1306 set $_arg; . $_file ) 1307 fi 1308 fi 1309 ;; 1310 esac 1311} 1312 1313# 1314# load_rc_config name 1315# Source in the configuration file for a given name. 1316# 1317load_rc_config() 1318{ 1319 local _name _rcvar_val _var _defval _v _msg _new _d 1320 _name=$1 1321 1322 if ${_rc_conf_loaded:-false}; then 1323 : 1324 else 1325 if [ -r /etc/defaults/rc.conf ]; then 1326 debug "Sourcing /etc/defaults/rc.conf" 1327 . /etc/defaults/rc.conf 1328 source_rc_confs 1329 elif [ -r /etc/rc.conf ]; then 1330 debug "Sourcing /etc/rc.conf (/etc/defaults/rc.conf doesn't exist)." 1331 . /etc/rc.conf 1332 fi 1333 _rc_conf_loaded=true 1334 fi 1335 1336 # If a service name was specified, attempt to load 1337 # service-specific configuration 1338 if [ -n "$_name" ] ; then 1339 for _d in /etc ${local_startup}; do 1340 _d=${_d%/rc.d} 1341 if [ -f ${_d}/rc.conf.d/"$_name" ]; then 1342 debug "Sourcing ${_d}/rc.conf.d/$_name" 1343 . ${_d}/rc.conf.d/"$_name" 1344 elif [ -d ${_d}/rc.conf.d/"$_name" ] ; then 1345 local _rc 1346 for _rc in ${_d}/rc.conf.d/"$_name"/* ; do 1347 if [ -f "$_rc" ] ; then 1348 debug "Sourcing $_rc" 1349 . "$_rc" 1350 fi 1351 done 1352 fi 1353 done 1354 fi 1355 1356 # Set defaults if defined. 1357 for _var in $rcvar $rcvars; do 1358 eval _defval=\$${_var}_defval 1359 if [ -n "$_defval" ]; then 1360 eval : \${$_var:=\$${_var}_defval} 1361 fi 1362 done 1363 1364 # check obsolete rc.conf variables 1365 for _var in $rcvars_obsolete; do 1366 eval _v=\$$_var 1367 eval _msg=\$${_var}_obsolete_msg 1368 eval _new=\$${_var}_newvar 1369 case $_v in 1370 "") 1371 ;; 1372 *) 1373 if [ -z "$_new" ]; then 1374 _msg="Ignored." 1375 else 1376 eval $_new=\"\$$_var\" 1377 if [ -z "$_msg" ]; then 1378 _msg="Use \$$_new instead." 1379 fi 1380 fi 1381 warn "\$$_var is obsolete. $_msg" 1382 ;; 1383 esac 1384 done 1385} 1386 1387# 1388# load_rc_config_var name var 1389# Read the rc.conf(5) var for name and set in the 1390# current shell, using load_rc_config in a subshell to prevent 1391# unwanted side effects from other variable assignments. 1392# 1393load_rc_config_var() 1394{ 1395 if [ $# -ne 2 ]; then 1396 err 3 'USAGE: load_rc_config_var name var' 1397 fi 1398 eval $(eval '( 1399 load_rc_config '$1' >/dev/null; 1400 if [ -n "${'$2'}" -o "${'$2'-UNSET}" != "UNSET" ]; then 1401 echo '$2'=\'\''${'$2'}\'\''; 1402 fi 1403 )' ) 1404} 1405 1406# 1407# rc_usage commands 1408# Print a usage string for $0, with `commands' being a list of 1409# valid commands. 1410# 1411rc_usage() 1412{ 1413 echo -n 1>&2 "Usage: $0 [fast|force|one|quiet](" 1414 1415 _sep= 1416 for _elem; do 1417 echo -n 1>&2 "$_sep$_elem" 1418 _sep="|" 1419 done 1420 echo 1>&2 ")" 1421 exit 1 1422} 1423 1424# 1425# err exitval message 1426# Display message to stderr and log to the syslog, and exit with exitval. 1427# 1428err() 1429{ 1430 exitval=$1 1431 shift 1432 1433 if [ -x /usr/bin/logger ]; then 1434 logger "$0: ERROR: $*" 1435 fi 1436 echo 1>&2 "$0: ERROR: $*" 1437 exit $exitval 1438} 1439 1440# 1441# warn message 1442# Display message to stderr and log to the syslog. 1443# 1444warn() 1445{ 1446 if [ -x /usr/bin/logger ]; then 1447 logger "$0: WARNING: $*" 1448 fi 1449 echo 1>&2 "$0: WARNING: $*" 1450} 1451 1452# 1453# info message 1454# Display informational message to stdout and log to syslog. 1455# 1456info() 1457{ 1458 case ${rc_info} in 1459 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 1460 if [ -x /usr/bin/logger ]; then 1461 logger "$0: INFO: $*" 1462 fi 1463 echo "$0: INFO: $*" 1464 ;; 1465 esac 1466} 1467 1468# 1469# debug message 1470# If debugging is enabled in rc.conf output message to stderr. 1471# BEWARE that you don't call any subroutine that itself calls this 1472# function. 1473# 1474debug() 1475{ 1476 case ${rc_debug} in 1477 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 1478 if [ -x /usr/bin/logger ]; then 1479 logger "$0: DEBUG: $*" 1480 fi 1481 echo 1>&2 "$0: DEBUG: $*" 1482 ;; 1483 esac 1484} 1485 1486# 1487# backup_file action file cur backup 1488# Make a backup copy of `file' into `cur', and save the previous 1489# version of `cur' as `backup' or use rcs for archiving. 1490# 1491# This routine checks the value of the backup_uses_rcs variable, 1492# which can be either YES or NO. 1493# 1494# The `action' keyword can be one of the following: 1495# 1496# add `file' is now being backed up (and is possibly 1497# being reentered into the backups system). `cur' 1498# is created and RCS files, if necessary, are 1499# created as well. 1500# 1501# update `file' has changed and needs to be backed up. 1502# If `cur' exists, it is copied to to `back' or 1503# checked into RCS (if the repository file is old), 1504# and then `file' is copied to `cur'. Another RCS 1505# check in done here if RCS is being used. 1506# 1507# remove `file' is no longer being tracked by the backups 1508# system. If RCS is not being used, `cur' is moved 1509# to `back', otherwise an empty file is checked in, 1510# and then `cur' is removed. 1511# 1512# 1513backup_file() 1514{ 1515 _action=$1 1516 _file=$2 1517 _cur=$3 1518 _back=$4 1519 1520 if checkyesno backup_uses_rcs; then 1521 _msg0="backup archive" 1522 _msg1="update" 1523 1524 # ensure that history file is not locked 1525 if [ -f $_cur,v ]; then 1526 rcs -q -u -U -M $_cur 1527 fi 1528 1529 # ensure after switching to rcs that the 1530 # current backup is not lost 1531 if [ -f $_cur ]; then 1532 # no archive, or current newer than archive 1533 if [ ! -f $_cur,v -o $_cur -nt $_cur,v ]; then 1534 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur 1535 rcs -q -kb -U $_cur 1536 co -q -f -u $_cur 1537 fi 1538 fi 1539 1540 case $_action in 1541 add|update) 1542 cp -p $_file $_cur 1543 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur 1544 rcs -q -kb -U $_cur 1545 co -q -f -u $_cur 1546 chown root:wheel $_cur $_cur,v 1547 ;; 1548 remove) 1549 cp /dev/null $_cur 1550 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur 1551 rcs -q -kb -U $_cur 1552 chown root:wheel $_cur $_cur,v 1553 rm $_cur 1554 ;; 1555 esac 1556 else 1557 case $_action in 1558 add|update) 1559 if [ -f $_cur ]; then 1560 cp -p $_cur $_back 1561 fi 1562 cp -p $_file $_cur 1563 chown root:wheel $_cur 1564 ;; 1565 remove) 1566 mv -f $_cur $_back 1567 ;; 1568 esac 1569 fi 1570} 1571 1572# make_symlink src link 1573# Make a symbolic link 'link' to src from basedir. If the 1574# directory in which link is to be created does not exist 1575# a warning will be displayed and an error will be returned. 1576# Returns 0 on success, 1 otherwise. 1577# 1578make_symlink() 1579{ 1580 local src link linkdir _me 1581 src="$1" 1582 link="$2" 1583 linkdir="`dirname $link`" 1584 _me="make_symlink()" 1585 1586 if [ -z "$src" -o -z "$link" ]; then 1587 warn "$_me: requires two arguments." 1588 return 1 1589 fi 1590 if [ ! -d "$linkdir" ]; then 1591 warn "$_me: the directory $linkdir does not exist." 1592 return 1 1593 fi 1594 if ! ln -sf $src $link; then 1595 warn "$_me: unable to make a symbolic link from $link to $src" 1596 return 1 1597 fi 1598 return 0 1599} 1600 1601# devfs_rulesets_from_file file 1602# Reads a set of devfs commands from file, and creates 1603# the specified rulesets with their rules. Returns non-zero 1604# if there was an error. 1605# 1606devfs_rulesets_from_file() 1607{ 1608 local file _err _me _opts 1609 file="$1" 1610 _me="devfs_rulesets_from_file" 1611 _err=0 1612 1613 if [ -z "$file" ]; then 1614 warn "$_me: you must specify a file" 1615 return 1 1616 fi 1617 if [ ! -e "$file" ]; then 1618 debug "$_me: no such file ($file)" 1619 return 0 1620 fi 1621 1622 # Disable globbing so that the rule patterns are not expanded 1623 # by accident with matching filesystem entries. 1624 _opts=$-; set -f 1625 1626 debug "reading rulesets from file ($file)" 1627 { while read line 1628 do 1629 case $line in 1630 \#*) 1631 continue 1632 ;; 1633 \[*\]*) 1634 rulenum=`expr "$line" : "\[.*=\([0-9]*\)\]"` 1635 if [ -z "$rulenum" ]; then 1636 warn "$_me: cannot extract rule number ($line)" 1637 _err=1 1638 break 1639 fi 1640 rulename=`expr "$line" : "\[\(.*\)=[0-9]*\]"` 1641 if [ -z "$rulename" ]; then 1642 warn "$_me: cannot extract rule name ($line)" 1643 _err=1 1644 break; 1645 fi 1646 eval $rulename=\$rulenum 1647 debug "found ruleset: $rulename=$rulenum" 1648 if ! /sbin/devfs rule -s $rulenum delset; then 1649 _err=1 1650 break 1651 fi 1652 ;; 1653 *) 1654 rulecmd="${line%%"\#*"}" 1655 # evaluate the command incase it includes 1656 # other rules 1657 if [ -n "$rulecmd" ]; then 1658 debug "adding rule ($rulecmd)" 1659 if ! eval /sbin/devfs rule -s $rulenum $rulecmd 1660 then 1661 _err=1 1662 break 1663 fi 1664 fi 1665 ;; 1666 esac 1667 if [ $_err -ne 0 ]; then 1668 debug "error in $_me" 1669 break 1670 fi 1671 done } < $file 1672 case $_opts in *f*) ;; *) set +f ;; esac 1673 return $_err 1674} 1675 1676# devfs_init_rulesets 1677# Initializes rulesets from configuration files. Returns 1678# non-zero if there was an error. 1679# 1680devfs_init_rulesets() 1681{ 1682 local file _me 1683 _me="devfs_init_rulesets" 1684 1685 # Go through this only once 1686 if [ -n "$devfs_rulesets_init" ]; then 1687 debug "$_me: devfs rulesets already initialized" 1688 return 1689 fi 1690 for file in $devfs_rulesets; do 1691 if ! devfs_rulesets_from_file $file; then 1692 warn "$_me: could not read rules from $file" 1693 return 1 1694 fi 1695 done 1696 devfs_rulesets_init=1 1697 debug "$_me: devfs rulesets initialized" 1698 return 0 1699} 1700 1701# devfs_set_ruleset ruleset [dir] 1702# Sets the default ruleset of dir to ruleset. The ruleset argument 1703# must be a ruleset name as specified in devfs.rules(5) file. 1704# Returns non-zero if it could not set it successfully. 1705# 1706devfs_set_ruleset() 1707{ 1708 local devdir rs _me 1709 [ -n "$1" ] && eval rs=\$$1 || rs= 1710 [ -n "$2" ] && devdir="-m "$2"" || devdir= 1711 _me="devfs_set_ruleset" 1712 1713 if [ -z "$rs" ]; then 1714 warn "$_me: you must specify a ruleset number" 1715 return 1 1716 fi 1717 debug "$_me: setting ruleset ($rs) on mount-point (${devdir#-m })" 1718 if ! /sbin/devfs $devdir ruleset $rs; then 1719 warn "$_me: unable to set ruleset $rs to ${devdir#-m }" 1720 return 1 1721 fi 1722 return 0 1723} 1724 1725# devfs_apply_ruleset ruleset [dir] 1726# Apply ruleset number $ruleset to the devfs mountpoint $dir. 1727# The ruleset argument must be a ruleset name as specified 1728# in a devfs.rules(5) file. Returns 0 on success or non-zero 1729# if it could not apply the ruleset. 1730# 1731devfs_apply_ruleset() 1732{ 1733 local devdir rs _me 1734 [ -n "$1" ] && eval rs=\$$1 || rs= 1735 [ -n "$2" ] && devdir="-m "$2"" || devdir= 1736 _me="devfs_apply_ruleset" 1737 1738 if [ -z "$rs" ]; then 1739 warn "$_me: you must specify a ruleset" 1740 return 1 1741 fi 1742 debug "$_me: applying ruleset ($rs) to mount-point (${devdir#-m })" 1743 if ! /sbin/devfs $devdir rule -s $rs applyset; then 1744 warn "$_me: unable to apply ruleset $rs to ${devdir#-m }" 1745 return 1 1746 fi 1747 return 0 1748} 1749 1750# devfs_domount dir [ruleset] 1751# Mount devfs on dir. If ruleset is specified it is set 1752# on the mount-point. It must also be a ruleset name as specified 1753# in a devfs.rules(5) file. Returns 0 on success. 1754# 1755devfs_domount() 1756{ 1757 local devdir rs _me 1758 devdir="$1" 1759 [ -n "$2" ] && rs=$2 || rs= 1760 _me="devfs_domount()" 1761 1762 if [ -z "$devdir" ]; then 1763 warn "$_me: you must specify a mount-point" 1764 return 1 1765 fi 1766 debug "$_me: mount-point is ($devdir), ruleset is ($rs)" 1767 if ! mount -t devfs dev "$devdir"; then 1768 warn "$_me: Unable to mount devfs on $devdir" 1769 return 1 1770 fi 1771 if [ -n "$rs" ]; then 1772 devfs_init_rulesets 1773 devfs_set_ruleset $rs $devdir 1774 devfs -m $devdir rule applyset 1775 fi 1776 return 0 1777} 1778 1779# Provide a function for normalizing the mounting of memory 1780# filesystems. This should allow the rest of the code here to remain 1781# as close as possible between 5-current and 4-stable. 1782# $1 = size 1783# $2 = mount point 1784# $3 = (optional) extra mdmfs flags 1785mount_md() 1786{ 1787 if [ -n "$3" ]; then 1788 flags="$3" 1789 fi 1790 /sbin/mdmfs $flags -s $1 md $2 1791} 1792 1793# Code common to scripts that need to load a kernel module 1794# if it isn't in the kernel yet. Syntax: 1795# load_kld [-e regex] [-m module] file 1796# where -e or -m chooses the way to check if the module 1797# is already loaded: 1798# regex is egrep'd in the output from `kldstat -v', 1799# module is passed to `kldstat -m'. 1800# The default way is as though `-m file' were specified. 1801load_kld() 1802{ 1803 local _loaded _mod _opt _re 1804 1805 while getopts "e:m:" _opt; do 1806 case "$_opt" in 1807 e) _re="$OPTARG" ;; 1808 m) _mod="$OPTARG" ;; 1809 *) err 3 'USAGE: load_kld [-e regex] [-m module] file' ;; 1810 esac 1811 done 1812 shift $(($OPTIND - 1)) 1813 if [ $# -ne 1 ]; then 1814 err 3 'USAGE: load_kld [-e regex] [-m module] file' 1815 fi 1816 _mod=${_mod:-$1} 1817 _loaded=false 1818 if [ -n "$_re" ]; then 1819 if kldstat -v | egrep -q -e "$_re"; then 1820 _loaded=true 1821 fi 1822 else 1823 if kldstat -q -m "$_mod"; then 1824 _loaded=true 1825 fi 1826 fi 1827 if ! $_loaded; then 1828 if ! kldload "$1"; then 1829 warn "Unable to load kernel module $1" 1830 return 1 1831 else 1832 info "$1 kernel module loaded." 1833 fi 1834 else 1835 debug "load_kld: $1 kernel module already loaded." 1836 fi 1837 return 0 1838} 1839 1840# ltr str src dst [var] 1841# Change every $src in $str to $dst. 1842# Useful when /usr is not yet mounted and we cannot use tr(1), sed(1) nor 1843# awk(1). If var is non-NULL, set it to the result. 1844ltr() 1845{ 1846 local _str _src _dst _out _com _var 1847 _str="$1" 1848 _src="$2" 1849 _dst="$3" 1850 _var="$4" 1851 _out="" 1852 1853 local IFS="${_src}" 1854 for _com in ${_str}; do 1855 if [ -z "${_out}" ]; then 1856 _out="${_com}" 1857 else 1858 _out="${_out}${_dst}${_com}" 1859 fi 1860 done 1861 if [ -n "${_var}" ]; then 1862 setvar "${_var}" "${_out}" 1863 else 1864 echo "${_out}" 1865 fi 1866} 1867 1868# Creates a list of providers for GELI encryption. 1869geli_make_list() 1870{ 1871 local devices devices2 1872 local provider mountpoint type options rest 1873 1874 # Create list of GELI providers from fstab. 1875 while read provider mountpoint type options rest ; do 1876 case ":${options}" in 1877 :*noauto*) 1878 noauto=yes 1879 ;; 1880 *) 1881 noauto=no 1882 ;; 1883 esac 1884 1885 case ":${provider}" in 1886 :#*) 1887 continue 1888 ;; 1889 *.eli) 1890 # Skip swap devices. 1891 if [ "${type}" = "swap" -o "${options}" = "sw" -o "${noauto}" = "yes" ]; then 1892 continue 1893 fi 1894 devices="${devices} ${provider}" 1895 ;; 1896 esac 1897 done < /etc/fstab 1898 1899 # Append providers from geli_devices. 1900 devices="${devices} ${geli_devices}" 1901 1902 for provider in ${devices}; do 1903 provider=${provider%.eli} 1904 provider=${provider#/dev/} 1905 devices2="${devices2} ${provider}" 1906 done 1907 1908 echo ${devices2} 1909} 1910 1911# Find scripts in local_startup directories that use the old syntax 1912# 1913find_local_scripts_old() { 1914 zlist='' 1915 slist='' 1916 for dir in ${local_startup}; do 1917 if [ -d "${dir}" ]; then 1918 for file in ${dir}/[0-9]*.sh; do 1919 grep '^# PROVIDE:' $file >/dev/null 2>&1 && 1920 continue 1921 zlist="$zlist $file" 1922 done 1923 for file in ${dir}/[!0-9]*.sh; do 1924 grep '^# PROVIDE:' $file >/dev/null 2>&1 && 1925 continue 1926 slist="$slist $file" 1927 done 1928 fi 1929 done 1930} 1931 1932find_local_scripts_new() { 1933 local_rc='' 1934 for dir in ${local_startup}; do 1935 if [ -d "${dir}" ]; then 1936 for file in `grep -l '^# PROVIDE:' ${dir}/* 2>/dev/null`; do 1937 case "$file" in 1938 *.sample) ;; 1939 *) if [ -x "$file" ]; then 1940 local_rc="${local_rc} ${file}" 1941 fi 1942 ;; 1943 esac 1944 done 1945 fi 1946 done 1947} 1948 1949# check_required_{before|after} command 1950# Check for things required by the command before and after its precmd, 1951# respectively. The two separate functions are needed because some 1952# conditions should prevent precmd from being run while other things 1953# depend on precmd having already been run. 1954# 1955check_required_before() 1956{ 1957 local _f 1958 1959 case "$1" in 1960 start) 1961 for _f in $required_vars; do 1962 if ! checkyesno $_f; then 1963 warn "\$${_f} is not enabled." 1964 if [ -z "$rc_force" ]; then 1965 return 1 1966 fi 1967 fi 1968 done 1969 1970 for _f in $required_dirs; do 1971 if [ ! -d "${_f}/." ]; then 1972 warn "${_f} is not a directory." 1973 if [ -z "$rc_force" ]; then 1974 return 1 1975 fi 1976 fi 1977 done 1978 1979 for _f in $required_files; do 1980 if [ ! -r "${_f}" ]; then 1981 warn "${_f} is not readable." 1982 if [ -z "$rc_force" ]; then 1983 return 1 1984 fi 1985 fi 1986 done 1987 ;; 1988 esac 1989 1990 return 0 1991} 1992 1993check_required_after() 1994{ 1995 local _f _args 1996 1997 case "$1" in 1998 start) 1999 for _f in $required_modules; do 2000 case "${_f}" in 2001 *~*) _args="-e ${_f#*~} ${_f%%~*}" ;; 2002 *:*) _args="-m ${_f#*:} ${_f%%:*}" ;; 2003 *) _args="${_f}" ;; 2004 esac 2005 if ! load_kld ${_args}; then 2006 if [ -z "$rc_force" ]; then 2007 return 1 2008 fi 2009 fi 2010 done 2011 ;; 2012 esac 2013 2014 return 0 2015} 2016 2017# check_jail mib 2018# Return true if security.jail.$mib exists and set to 1. 2019 2020check_jail() 2021{ 2022 local _mib _v 2023 2024 _mib=$1 2025 if _v=$(${SYSCTL_N} "security.jail.$_mib" 2> /dev/null); then 2026 case $_v in 2027 1) return 0;; 2028 esac 2029 fi 2030 return 1 2031} 2032 2033# check_kern_features mib 2034# Return existence of kern.features.* sysctl MIB as true or 2035# false. The result will be cached in $_rc_cache_kern_features_ 2036# namespace. "0" means the kern.features.X exists. 2037 2038check_kern_features() 2039{ 2040 local _v 2041 2042 [ -n "$1" ] || return 1; 2043 eval _v=\$_rc_cache_kern_features_$1 2044 [ -n "$_v" ] && return "$_v"; 2045 2046 if ${SYSCTL_N} kern.features.$1 > /dev/null 2>&1; then 2047 eval _rc_cache_kern_features_$1=0 2048 return 0 2049 else 2050 eval _rc_cache_kern_features_$1=1 2051 return 1 2052 fi 2053} 2054 2055# check_namevarlist var 2056# Return "0" if ${name}_var is reserved in rc.subr. 2057 2058_rc_namevarlist="program chroot chdir env flags fib nice user group groups prepend" 2059check_namevarlist() 2060{ 2061 local _v 2062 2063 for _v in $_rc_namevarlist; do 2064 case $1 in 2065 $_v) return 0 ;; 2066 esac 2067 done 2068 2069 return 1 2070} 2071 2072# _echoonce var msg mode 2073# mode=0: Echo $msg if ${$var} is empty. 2074# After doing echo, a string is set to ${$var}. 2075# 2076# mode=1: Echo $msg if ${$var} is a string with non-zero length. 2077# 2078_echoonce() 2079{ 2080 local _var _msg _mode 2081 eval _var=\$$1 2082 _msg=$2 2083 _mode=$3 2084 2085 case $_mode in 2086 1) [ -n "$_var" ] && echo "$_msg" ;; 2087 *) [ -z "$_var" ] && echo -n "$_msg" && eval "$1=finished" ;; 2088 esac 2089} 2090 2091fi # [ -z "${_rc_subr_loaded}" ] 2092 2093_rc_subr_loaded=: 2094