rc.subr revision 160667
1# $NetBSD: rc.subr,v 1.66 2006/04/01 10:05:50 he Exp $ 2# $FreeBSD: head/etc/rc.subr 160667 2006-07-25 17:14:38Z yar $ 3# 4# Copyright (c) 1997-2004 The NetBSD Foundation, Inc. 5# All rights reserved. 6# 7# This code is derived from software contributed to The NetBSD Foundation 8# by Luke Mewburn. 9# 10# Redistribution and use in source and binary forms, with or without 11# modification, are permitted provided that the following conditions 12# are met: 13# 1. Redistributions of source code must retain the above copyright 14# notice, this list of conditions and the following disclaimer. 15# 2. Redistributions in binary form must reproduce the above copyright 16# notice, this list of conditions and the following disclaimer in the 17# documentation and/or other materials provided with the distribution. 18# 3. All advertising materials mentioning features or use of this software 19# must display the following acknowledgement: 20# This product includes software developed by the NetBSD 21# Foundation, Inc. and its contributors. 22# 4. Neither the name of The NetBSD Foundation nor the names of its 23# contributors may be used to endorse or promote products derived 24# from this software without specific prior written permission. 25# 26# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 27# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 28# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 29# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 30# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 31# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 32# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 33# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 34# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 35# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 36# POSSIBILITY OF SUCH DAMAGE. 37# 38# rc.subr 39# functions used by various rc scripts 40# 41 42: ${rcvar_manpage:='rc.conf(5)'} 43 44# 45# Operating System dependent/independent variables 46# 47 48if [ -z "${_rc_subr_loaded}" ]; then 49 50_rc_subr_loaded="YES" 51 52SYSCTL="/sbin/sysctl" 53SYSCTL_N="${SYSCTL} -n" 54CMD_OSTYPE="${SYSCTL_N} kern.ostype" 55OSTYPE=`${CMD_OSTYPE}` 56ID="/usr/bin/id" 57JID=`ps -p $$ -o jid=` 58IDCMD="if [ -x $ID ]; then $ID -un; fi" 59 60case ${OSTYPE} in 61FreeBSD) 62 SYSCTL_W="${SYSCTL}" 63 ;; 64NetBSD) 65 SYSCTL_W="${SYSCTL} -w" 66 ;; 67esac 68 69# 70# functions 71# --------- 72 73# 74# set_rcvar base_var 75# Set the variable name enabling a specific service. 76# FreeBSD uses ${service}_enable, while NetBSD uses 77# just the name of the service. For example: 78# FreeBSD: sendmail_enable="YES" 79# NetBSD : sendmail="YES" 80# $1 - if $name is not the base to work of off, specify 81# a different one 82# 83set_rcvar() 84{ 85 if [ -z "$1" ]; then 86 base_var=${name} 87 else 88 base_var="$1" 89 fi 90 91 case ${OSTYPE} in 92 FreeBSD) 93 echo ${base_var}_enable 94 ;; 95 NetBSD) 96 echo ${base_var} 97 ;; 98 *) 99 echo 'XXX' 100 ;; 101 esac 102} 103 104# 105# force_depend script 106# Force a service to start. Intended for use by services 107# to resolve dependency issues. It is assumed the caller 108# has check to make sure this call is necessary 109# $1 - filename of script, in /etc/rc.d, to run 110# 111force_depend() 112{ 113 _depend="$1" 114 115 info "${name} depends on ${_depend}, which will be forced to start." 116 if ! /etc/rc.d/${_depend} forcestart; then 117 warn "Unable to force ${_depend}. It may already be running." 118 return 1 119 fi 120 return 0 121} 122 123# 124# checkyesno var 125# Test $1 variable, and warn if not set to YES or NO. 126# Return 0 if it's "yes" (et al), nonzero otherwise. 127# 128checkyesno() 129{ 130 eval _value=\$${1} 131 debug "checkyesno: $1 is set to $_value." 132 case $_value in 133 134 # "yes", "true", "on", or "1" 135 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 136 return 0 137 ;; 138 139 # "no", "false", "off", or "0" 140 [Nn][Oo]|[Ff][Aa][Ll][Ss][Ee]|[Oo][Ff][Ff]|0) 141 return 1 142 ;; 143 *) 144 warn "\$${1} is not set properly - see ${rcvar_manpage}." 145 return 1 146 ;; 147 esac 148} 149 150# 151# reverse_list list 152# print the list in reverse order 153# 154reverse_list() 155{ 156 _revlist= 157 for _revfile; do 158 _revlist="$_revfile $_revlist" 159 done 160 echo $_revlist 161} 162 163# 164# mount_critical_filesystems type 165# Go through the list of critical filesystems as provided in 166# the rc.conf(5) variable $critical_filesystems_${type}, checking 167# each one to see if it is mounted, and if it is not, mounting it. 168# 169mount_critical_filesystems() 170{ 171 eval _fslist=\$critical_filesystems_${1} 172 for _fs in $_fslist; do 173 mount | ( 174 _ismounted=false 175 while read what _on on _type type; do 176 if [ $on = $_fs ]; then 177 _ismounted=true 178 fi 179 done 180 if $_ismounted; then 181 : 182 else 183 mount $_fs >/dev/null 2>&1 184 fi 185 ) 186 done 187} 188 189# 190# check_pidfile pidfile procname [interpreter] 191# Parses the first line of pidfile for a PID, and ensures 192# that the process is running and matches procname. 193# Prints the matching PID upon success, nothing otherwise. 194# interpreter is optional; see _find_processes() for details. 195# 196check_pidfile() 197{ 198 _pidfile=$1 199 _procname=$2 200 _interpreter=$3 201 if [ -z "$_pidfile" -o -z "$_procname" ]; then 202 err 3 'USAGE: check_pidfile pidfile procname [interpreter]' 203 fi 204 if [ ! -f $_pidfile ]; then 205 debug "pid file ($_pidfile): not readable." 206 return 207 fi 208 read _pid _junk < $_pidfile 209 if [ -z "$_pid" ]; then 210 debug "pid file ($_pidfile): no pid in file." 211 return 212 fi 213 _find_processes $_procname ${_interpreter:-.} '-p '"$_pid" 214} 215 216# 217# check_process procname [interpreter] 218# Ensures that a process (or processes) named procname is running. 219# Prints a list of matching PIDs. 220# interpreter is optional; see _find_processes() for details. 221# 222check_process() 223{ 224 _procname=$1 225 _interpreter=$2 226 if [ -z "$_procname" ]; then 227 err 3 'USAGE: check_process procname [interpreter]' 228 fi 229 _find_processes $_procname ${_interpreter:-.} '-ax' 230} 231 232# 233# _find_processes procname interpreter psargs 234# Search for procname in the output of ps generated by psargs. 235# Prints the PIDs of any matching processes, space separated. 236# 237# If interpreter == ".", check the following variations of procname 238# against the first word of each command: 239# procname 240# `basename procname` 241# `basename procname` + ":" 242# "(" + `basename procname` + ")" 243# "[" + `basename procname` + "]" 244# 245# If interpreter != ".", read the first line of procname, remove the 246# leading #!, normalise whitespace, append procname, and attempt to 247# match that against each command, either as is, or with extra words 248# at the end. As an alternative, to deal with interpreted daemons 249# using perl, the basename of the interpreter plus a colon is also 250# tried as the prefix to procname. 251# 252_find_processes() 253{ 254 if [ $# -ne 3 ]; then 255 err 3 'USAGE: _find_processes procname interpreter psargs' 256 fi 257 _procname=$1 258 _interpreter=$2 259 _psargs=$3 260 261 _pref= 262 if [ $_interpreter != "." ]; then # an interpreted script 263 read _interp < $_procname # read interpreter name 264 _interp=${_interp#\#!} # strip #! 265 set -- $_interp 266 if [ $_interpreter != $1 ]; then 267 warn "\$command_interpreter $_interpreter != $1" 268 fi 269 _interp="$* $_procname" # cleanup spaces, add _procname 270 _interpbn=${1##*/} 271 _fp_args='_argv' 272 _fp_match='case "$_argv" in 273 ${_interp}|"${_interp} "*|"${_interpbn}: ${_procname}"*)' 274 else # a normal daemon 275 _procnamebn=${_procname##*/} 276 _fp_args='_arg0 _argv' 277 _fp_match='case "$_arg0" in 278 $_procname|$_procnamebn|${_procnamebn}:|"(${_procnamebn})"|"[${_procnamebn}]")' 279 fi 280 281 _proccheck=' 282 ps 2>/dev/null -o "pid,jid,command" '"$_psargs"' | 283 while read _npid _jid '"$_fp_args"'; do 284 case "$_npid" in 285 PID) 286 continue;; 287 esac; '"$_fp_match"' 288 if [ "$JID" -eq "$_jid" ]; 289 then echo -n "$_pref$_npid"; 290 _pref=" "; 291 fi 292 ;; 293 esac 294 done' 295 296# debug "in _find_processes: proccheck is ($_proccheck)." 297 eval $_proccheck 298} 299 300# 301# wait_for_pids pid [pid ...] 302# spins until none of the pids exist 303# 304wait_for_pids() 305{ 306 _list="$@" 307 if [ -z "$_list" ]; then 308 return 309 fi 310 _prefix= 311 while true; do 312 _nlist=""; 313 for _j in $_list; do 314 if kill -0 $_j 2>/dev/null; then 315 _nlist="${_nlist}${_nlist:+ }$_j" 316 fi 317 done 318 if [ -z "$_nlist" ]; then 319 break 320 fi 321 _list=$_nlist 322 echo -n ${_prefix:-"Waiting for PIDS: "}$_list 323 _prefix=", " 324 sleep 2 325 done 326 if [ -n "$_prefix" ]; then 327 echo "." 328 fi 329} 330 331# 332# run_rc_command argument 333# Search for argument in the list of supported commands, which is: 334# "start stop restart rcvar status poll ${extra_commands}" 335# If there's a match, run ${argument}_cmd or the default method 336# (see below). 337# 338# If argument has a given prefix, then change the operation as follows: 339# Prefix Operation 340# ------ --------- 341# fast Skip the pid check, and set rc_fast=yes 342# force Set ${rcvar} to YES, and set rc_force=yes 343# one Set ${rcvar} to YES 344# 345# The following globals are used: 346# 347# Name Needed Purpose 348# ---- ------ ------- 349# name y Name of script. 350# 351# command n Full path to command. 352# Not needed if ${rc_arg}_cmd is set for 353# each keyword. 354# 355# command_args n Optional args/shell directives for command. 356# 357# command_interpreter n If not empty, command is interpreted, so 358# call check_{pidfile,process}() appropriately. 359# 360# extra_commands n List of extra commands supported. 361# 362# pidfile n If set, use check_pidfile $pidfile $command, 363# otherwise use check_process $command. 364# In either case, only check if $command is set. 365# 366# procname n Process name to check for instead of $command. 367# 368# rcvar n This is checked with checkyesno to determine 369# if the action should be run. 370# 371# ${name}_program n Full path to command. 372# Meant to be used in /etc/rc.conf to override 373# ${command}. 374# 375# ${name}_chroot n Directory to chroot to before running ${command} 376# Requires /usr to be mounted. 377# 378# ${name}_chdir n Directory to cd to before running ${command} 379# (if not using ${name}_chroot). 380# 381# ${name}_flags n Arguments to call ${command} with. 382# NOTE: $flags from the parent environment 383# can be used to override this. 384# 385# ${name}_nice n Nice level to run ${command} at. 386# 387# ${name}_user n User to run ${command} as, using su(1) if not 388# using ${name}_chroot. 389# Requires /usr to be mounted. 390# 391# ${name}_group n Group to run chrooted ${command} as. 392# Requires /usr to be mounted. 393# 394# ${name}_groups n Comma separated list of supplementary groups 395# to run the chrooted ${command} with. 396# Requires /usr to be mounted. 397# 398# ${rc_arg}_cmd n If set, use this as the method when invoked; 399# Otherwise, use default command (see below) 400# 401# ${rc_arg}_precmd n If set, run just before performing the 402# ${rc_arg}_cmd method in the default 403# operation (i.e, after checking for required 404# bits and process (non)existence). 405# If this completes with a non-zero exit code, 406# don't run ${rc_arg}_cmd. 407# 408# ${rc_arg}_postcmd n If set, run just after performing the 409# ${rc_arg}_cmd method, if that method 410# returned a zero exit code. 411# 412# required_dirs n If set, check for the existence of the given 413# directories before running the default 414# (re)start command. 415# 416# required_files n If set, check for the readability of the given 417# files before running the default (re)start 418# command. 419# 420# required_vars n If set, perform checkyesno on each of the 421# listed variables before running the default 422# (re)start command. 423# 424# Default behaviour for a given argument, if no override method is 425# provided: 426# 427# Argument Default behaviour 428# -------- ----------------- 429# start if !running && checkyesno ${rcvar} 430# ${command} 431# 432# stop if ${pidfile} 433# rc_pid=$(check_pidfile $pidfile $command) 434# else 435# rc_pid=$(check_process $command) 436# kill $sig_stop $rc_pid 437# wait_for_pids $rc_pid 438# ($sig_stop defaults to TERM.) 439# 440# reload Similar to stop, except use $sig_reload instead, 441# and doesn't wait_for_pids. 442# $sig_reload defaults to HUP. 443# Note that `reload' isn't provided by default, 444# it should be enabled via $extra_commands. 445# 446# restart Run `stop' then `start'. 447# 448# status Show if ${command} is running, etc. 449# 450# poll Wait for ${command} to exit. 451# 452# rcvar Display what rc.conf variable is used (if any). 453# 454# Variables available to methods, and after run_rc_command() has 455# completed: 456# 457# Variable Purpose 458# -------- ------- 459# rc_arg Argument to command, after fast/force/one processing 460# performed 461# 462# rc_flags Flags to start the default command with. 463# Defaults to ${name}_flags, unless overridden 464# by $flags from the environment. 465# This variable may be changed by the precmd method. 466# 467# rc_pid PID of command (if appropriate) 468# 469# rc_fast Not empty if "fast" was provided (q.v.) 470# 471# rc_force Not empty if "force" was provided (q.v.) 472# 473# 474run_rc_command() 475{ 476 _return=0 477 rc_arg=$1 478 if [ -z "$name" ]; then 479 err 3 'run_rc_command: $name is not set.' 480 fi 481 482 # Don't repeat the first argument when passing additional command- 483 # line arguments to the command subroutines. 484 # 485 shift 1 486 rc_extra_args="$*" 487 488 _rc_prefix= 489 case "$rc_arg" in 490 fast*) # "fast" prefix; don't check pid 491 rc_arg=${rc_arg#fast} 492 rc_fast=yes 493 ;; 494 force*) # "force prefix; always run 495 rc_force=yes 496 _rc_prefix=force 497 rc_arg=${rc_arg#${_rc_prefix}} 498 if [ -n "${rcvar}" ]; then 499 eval ${rcvar}=YES 500 fi 501 ;; 502 one*) # "one" prefix; set ${rcvar}=yes 503 _rc_prefix=one 504 rc_arg=${rc_arg#${_rc_prefix}} 505 if [ -n "${rcvar}" ]; then 506 eval ${rcvar}=YES 507 fi 508 ;; 509 esac 510 511 _keywords="start stop restart rcvar $extra_commands" 512 rc_pid= 513 _pidcmd= 514 _procname=${procname:-${command}} 515 516 # setup pid check command 517 if [ -n "$_procname" ]; then 518 if [ -n "$pidfile" ]; then 519 _pidcmd='rc_pid=$(check_pidfile '"$pidfile $_procname $command_interpreter"')' 520 else 521 _pidcmd='rc_pid=$(check_process '"$_procname $command_interpreter"')' 522 fi 523 if [ -n "$_pidcmd" ]; then 524 _keywords="${_keywords} status poll" 525 fi 526 fi 527 528 if [ -z "$rc_arg" ]; then 529 rc_usage $_keywords 530 fi 531 532 if [ -n "$flags" ]; then # allow override from environment 533 rc_flags=$flags 534 else 535 eval rc_flags=\$${name}_flags 536 fi 537 eval _chdir=\$${name}_chdir _chroot=\$${name}_chroot \ 538 _nice=\$${name}_nice _user=\$${name}_user \ 539 _group=\$${name}_group _groups=\$${name}_groups 540 541 if [ -n "$_user" ]; then # unset $_user if running as that user 542 if [ "$_user" = "$(eval $IDCMD)" ]; then 543 unset _user 544 fi 545 fi 546 547 # if ${rcvar} is set, and $1 is not 548 # "rcvar", then run 549 # checkyesno ${rcvar} 550 # and return if that failed 551 # 552 if [ -n "${rcvar}" -a "$rc_arg" != "rcvar" ]; then 553 if ! checkyesno ${rcvar}; then 554 return 0 555 fi 556 fi 557 558 eval $_pidcmd # determine the pid if necessary 559 560 for _elem in $_keywords; do 561 if [ "$_elem" != "$rc_arg" ]; then 562 continue 563 fi 564 565 # if there's a custom ${XXX_cmd}, 566 # run that instead of the default 567 # 568 eval _cmd=\$${rc_arg}_cmd _precmd=\$${rc_arg}_precmd \ 569 _postcmd=\$${rc_arg}_postcmd 570 if [ -n "$_cmd" ]; then 571 # if the precmd failed and force 572 # isn't set, exit 573 # 574 if [ -n "$_precmd" ]; then 575 debug "run_rc_command: evaluating ${_precmd}()." 576 eval $_precmd $rc_extra_args 577 _return=$? 578 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 579 return 1 580 fi 581 582 if [ -n "$_cmd" ]; then 583 debug "run_rc_command: evaluating ${_cmd}()." 584 eval $_cmd $rc_extra_args 585 _return=$? 586 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 587 return 1 588 fi 589 590 if [ -n "$_postcmd" ]; then 591 debug "run_rc_command: evaluating ${_postcmd}()." 592 eval $_postcmd $rc_extra_args 593 _return=$? 594 fi 595 return $_return 596 fi 597 598 case "$rc_arg" in # default operations... 599 600 status) 601 if [ -n "$rc_pid" ]; then 602 echo "${name} is running as pid $rc_pid." 603 else 604 echo "${name} is not running." 605 return 1 606 fi 607 ;; 608 609 start) 610 if [ -z "$rc_fast" -a -n "$rc_pid" ]; then 611 echo 1>&2 "${name} already running? (pid=$rc_pid)." 612 return 1 613 fi 614 615 if [ ! -x ${_chroot}${command} ]; then 616 warn "run_rc_command: cannot run $command" 617 return 1 618 fi 619 620 # check for required variables, 621 # directories, and files 622 # 623 for _f in $required_vars; do 624 if ! checkyesno $_f; then 625 warn "\$${_f} is not enabled." 626 if [ -z "$rc_force" ]; then 627 return 1 628 fi 629 fi 630 done 631 for _f in $required_dirs; do 632 if [ ! -d "${_f}/." ]; then 633 warn "${_f} is not a directory." 634 if [ -z "$rc_force" ]; then 635 return 1 636 fi 637 fi 638 done 639 for _f in $required_files; do 640 if [ ! -r "${_f}" ]; then 641 warn "${_f} is not readable." 642 if [ -z "$rc_force" ]; then 643 return 1 644 fi 645 fi 646 done 647 648 # if the precmd failed and force 649 # isn't set, exit 650 # 651 if [ -n "${_precmd}" ]; then 652 debug "run_rc_command: evaluating ${_precmd}()." 653 eval $_precmd 654 _return=$? 655 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 656 return 1 657 fi 658 659 # setup the command to run, and run it 660 # 661 echo "Starting ${name}." 662 if [ -n "$_chroot" ]; then 663 _doit="\ 664${_nice:+nice -n $_nice }\ 665chroot ${_user:+-u $_user }${_group:+-g $_group }${_groups:+-G $_groups }\ 666$_chroot $command $rc_flags $command_args" 667 else 668 _doit="\ 669${_chdir:+cd $_chdir; }\ 670${_nice:+nice -n $_nice }\ 671$command $rc_flags $command_args" 672 if [ -n "$_user" ]; then 673 _doit="su -m $_user -c 'sh -c \"$_doit\"'" 674 fi 675 fi 676 677 # if the cmd failed and force 678 # isn't set, exit 679 # 680 debug "run_rc_command: _doit: $_doit" 681 eval $_doit 682 _return=$? 683 [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 684 685 # finally, run postcmd 686 # 687 if [ -n "${_postcmd}" ]; then 688 debug "run_rc_command: evaluating ${_postcmd}()." 689 eval $_postcmd 690 fi 691 ;; 692 693 stop) 694 if [ -z "$rc_pid" ]; then 695 [ -n "$rc_fast" ] && return 0 696 if [ -n "$pidfile" ]; then 697 echo 1>&2 \ 698 "${name} not running? (check $pidfile)." 699 else 700 echo 1>&2 "${name} not running?" 701 fi 702 return 1 703 fi 704 705 # if the precmd failed and force 706 # isn't set, exit 707 # 708 if [ -n "$_precmd" ]; then 709 eval $_precmd 710 _return=$? 711 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 712 return 1 713 fi 714 715 # send the signal to stop 716 # 717 echo "Stopping ${name}." 718 _doit="kill -${sig_stop:-TERM} $rc_pid" 719 if [ -n "$_user" ]; then 720 _doit="su -m $_user -c 'sh -c \"$_doit\"'" 721 fi 722 723 # if the stop cmd failed and force 724 # isn't set, exit 725 # 726 eval $_doit 727 _return=$? 728 [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 729 730 # wait for the command to exit, 731 # and run postcmd. 732 wait_for_pids $rc_pid 733 if [ -n "$_postcmd" ]; then 734 eval $_postcmd 735 _return=$? 736 fi 737 ;; 738 739 reload) 740 if [ -z "$rc_pid" ]; then 741 if [ -n "$pidfile" ]; then 742 echo 1>&2 \ 743 "${name} not running? (check $pidfile)." 744 else 745 echo 1>&2 "${name} not running?" 746 fi 747 return 1 748 fi 749 echo "Reloading ${name} config files." 750 if [ -n "$_precmd" ]; then 751 eval $_precmd 752 _return=$? 753 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 754 return 1 755 fi 756 _doit="kill -${sig_reload:-HUP} $rc_pid" 757 if [ -n "$_user" ]; then 758 _doit="su -m $_user -c 'sh -c \"$_doit\"'" 759 fi 760 eval $_doit 761 _return=$? 762 [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 763 if [ -n "$_postcmd" ]; then 764 eval $_postcmd 765 _return=$? 766 fi 767 ;; 768 769 restart) 770 if [ -n "$_precmd" ]; then 771 eval $_precmd $rc_extra_args 772 _return=$? 773 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 774 return 1 775 fi 776 # prevent restart being called more 777 # than once by any given script 778 # 779 if ${_rc_restart_done:-false}; then 780 return 0 781 fi 782 _rc_restart_done=true 783 784 # run stop in a subshell to keep variables for start 785 ( run_rc_command ${_rc_prefix}stop $rc_extra_args ) 786 run_rc_command ${_rc_prefix}start $rc_extra_args 787 788 if [ -n "$_postcmd" ]; then 789 eval $_postcmd $rc_extra_args 790 _return=$? 791 fi 792 ;; 793 794 poll) 795 if [ -n "$rc_pid" ]; then 796 wait_for_pids $rc_pid 797 fi 798 ;; 799 800 rcvar) 801 echo "# $name" 802 if [ -n "$rcvar" ]; then 803 if checkyesno ${rcvar}; then 804 echo "\$${rcvar}=YES" 805 else 806 echo "\$${rcvar}=NO" 807 fi 808 fi 809 ;; 810 811 *) 812 rc_usage $_keywords 813 ;; 814 815 esac 816 return $_return 817 done 818 819 echo 1>&2 "$0: unknown directive '$rc_arg'." 820 rc_usage $_keywords 821 # not reached 822} 823 824# 825# run_rc_script file arg 826# Start the script `file' with `arg', and correctly handle the 827# return value from the script. If `file' ends with `.sh', it's 828# sourced into the current environment. If `file' appears to be 829# a backup or scratch file, ignore it. Otherwise if it's 830# executable run as a child process. 831# 832run_rc_script() 833{ 834 _file=$1 835 _arg=$2 836 if [ -z "$_file" -o -z "$_arg" ]; then 837 err 3 'USAGE: run_rc_script file arg' 838 fi 839 840 unset name command command_args command_interpreter \ 841 extra_commands pidfile procname \ 842 rcvar required_dirs required_files required_vars 843 eval unset ${_arg}_cmd ${_arg}_precmd ${_arg}_postcmd 844 845 case "$_file" in 846 /etc/rc.d/*.sh) # run in current shell 847 set $_arg; . $_file 848 ;; 849 *[~#]|*.OLD|*.bak|*.orig|*,v) # scratch file; skip 850 warn "Ignoring scratch file $_file" 851 ;; 852 *) # run in subshell 853 if [ -x $_file ]; then 854 if [ -n "$rc_fast_and_loose" ]; then 855 set $_arg; . $_file 856 else 857 ( trap "echo Script $_file interrupted; kill -QUIT $$" 3 858 trap "echo Script $_file interrupted; exit 1" 2 859 set $_arg; . $_file ) 860 fi 861 fi 862 ;; 863 esac 864} 865 866# 867# load_rc_config name 868# Source in the configuration file for a given name. 869# 870load_rc_config() 871{ 872 local _tmp 873 874 _name=$1 875 if [ -z "$_name" ]; then 876 err 3 'USAGE: load_rc_config name' 877 fi 878 879 if ${_rc_conf_loaded:-false}; then 880 : 881 else 882 if [ -r /etc/defaults/rc.conf ]; then 883 debug "Sourcing /etc/defaults/rc.conf" 884 . /etc/defaults/rc.conf 885 source_rc_confs 886 elif [ -r /etc/rc.conf ]; then 887 debug "Sourcing /etc/rc.conf (/etc/defaults/rc.conf doesn't exist)." 888 . /etc/rc.conf 889 fi 890 _rc_conf_loaded=true 891 fi 892 893 eval _override_command=\$${name}_program 894 command=${command:+${_override_command:-$command}} 895 896 if [ -z "${command}" ]; then 897 _tmp=`/bin/realpath $0` 898 prefix=${_tmp%/etc/rc.d/*}/ 899 else 900 prefix=${command%/*bin/*}/ 901 fi 902 if [ "${prefix}" = "/" -o "${prefix}" = "/usr/" ] ; then 903 etcdir="/etc" 904 else 905 etcdir="${prefix}etc" 906 fi 907 908 # XXX - Deprecated 909 if [ -f /etc/rc.conf.d/${_name} -a ${etcdir} != "/etc" ]; then 910 debug "Sourcing /etc/rc.conf.d/${_name}" 911 warn "Warning: /etc/rc.conf.d/${_name} is deprecated, please use ${etcdir}/rc.conf.d/${_name} instead." 912 if [ -f ${etcdir}/rc.conf.d/${_name} ]; then 913 warn "Warning: Both /etc/rc.conf.d/${_name} and ${etcdir}/rc.conf.d/${_name} exist." 914 fi 915 . /etc/rc.conf.d/${_name} 916 fi 917 918 if [ -f ${etcdir}/rc.conf.d/${_name} ]; then 919 debug "Sourcing ${etcdir}/rc.conf.d/${_name}" 920 . ${etcdir}/rc.conf.d/${_name} 921 fi 922 923 # XXX - Deprecated variable name support 924 # 925 case ${OSTYPE} in 926 FreeBSD) 927 [ -n "$portmap_enable" ] && rpcbind_enable="$portmap_enable" 928 [ -n "$portmap_program" ] && rpcbind_program="$portmap_program" 929 [ -n "$portmap_flags" ] && rpcbind_flags="$portmap_flags" 930 [ -n "$single_mountd_enable" ] && mountd_enable="$single_mountd_enable" 931 [ -n "$xntpd_enable" ] && ntpd_enable="$xntpd_enable" 932 [ -n "$xntpd_program" ] && ntpd_program="$xntpd_program" 933 [ -n "$xntpd_flags" ] && ntpd_flags="$xntpd_flags" 934 [ -n "$dhcp_program" ] && dhclient_program="$dhcp_program" 935 [ -n "$dhcp_flags" ] && dhclient_flags="$dhcp_flags" 936 ;; 937 esac 938} 939 940# 941# load_rc_config_var name var 942# Read the rc.conf(5) var for name and set in the 943# current shell, using load_rc_config in a subshell to prevent 944# unwanted side effects from other variable assignments. 945# 946load_rc_config_var() 947{ 948 if [ $# -ne 2 ]; then 949 err 3 'USAGE: load_rc_config_var name var' 950 fi 951 eval $(eval '( 952 load_rc_config '$1' >/dev/null; 953 if [ -n "${'$2'}" -o "${'$2'-UNSET}" != "UNSET" ]; then 954 echo '$2'=\'\''${'$2'}\'\''; 955 fi 956 )' ) 957} 958 959# 960# rc_usage commands 961# Print a usage string for $0, with `commands' being a list of 962# valid commands. 963# 964rc_usage() 965{ 966 echo -n 1>&2 "Usage: $0 [fast|force|one](" 967 968 _sep= 969 for _elem; do 970 echo -n 1>&2 "$_sep$_elem" 971 _sep="|" 972 done 973 echo 1>&2 ")" 974 exit 1 975} 976 977# 978# err exitval message 979# Display message to stderr and log to the syslog, and exit with exitval. 980# 981err() 982{ 983 exitval=$1 984 shift 985 986 if [ -x /usr/bin/logger ]; then 987 logger "$0: ERROR: $*" 988 fi 989 echo 1>&2 "$0: ERROR: $*" 990 exit $exitval 991} 992 993# 994# warn message 995# Display message to stderr and log to the syslog. 996# 997warn() 998{ 999 if [ -x /usr/bin/logger ]; then 1000 logger "$0: WARNING: $*" 1001 fi 1002 echo 1>&2 "$0: WARNING: $*" 1003} 1004 1005# 1006# info message 1007# Display informational message to stdout and log to syslog. 1008# 1009info() 1010{ 1011 case ${rc_info} in 1012 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 1013 if [ -x /usr/bin/logger ]; then 1014 logger "$0: INFO: $*" 1015 fi 1016 echo "$0: INFO: $*" 1017 ;; 1018 esac 1019} 1020 1021# 1022# debug message 1023# If debugging is enabled in rc.conf output message to stderr. 1024# BEWARE that you don't call any subroutine that itself calls this 1025# function. 1026# 1027debug() 1028{ 1029 case ${rc_debug} in 1030 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 1031 if [ -x /usr/bin/logger ]; then 1032 logger "$0: INFO: $*" 1033 fi 1034 echo 1>&2 "$0: DEBUG: $*" 1035 ;; 1036 esac 1037} 1038 1039# 1040# backup_file action file cur backup 1041# Make a backup copy of `file' into `cur', and save the previous 1042# version of `cur' as `backup' or use rcs for archiving. 1043# 1044# This routine checks the value of the backup_uses_rcs variable, 1045# which can be either YES or NO. 1046# 1047# The `action' keyword can be one of the following: 1048# 1049# add `file' is now being backed up (and is possibly 1050# being reentered into the backups system). `cur' 1051# is created and RCS files, if necessary, are 1052# created as well. 1053# 1054# update `file' has changed and needs to be backed up. 1055# If `cur' exists, it is copied to to `back' or 1056# checked into RCS (if the repository file is old), 1057# and then `file' is copied to `cur'. Another RCS 1058# check in done here if RCS is being used. 1059# 1060# remove `file' is no longer being tracked by the backups 1061# system. If RCS is not being used, `cur' is moved 1062# to `back', otherwise an empty file is checked in, 1063# and then `cur' is removed. 1064# 1065# 1066backup_file() 1067{ 1068 _action=$1 1069 _file=$2 1070 _cur=$3 1071 _back=$4 1072 1073 if checkyesno backup_uses_rcs; then 1074 _msg0="backup archive" 1075 _msg1="update" 1076 1077 # ensure that history file is not locked 1078 if [ -f $_cur,v ]; then 1079 rcs -q -u -U -M $_cur 1080 fi 1081 1082 # ensure after switching to rcs that the 1083 # current backup is not lost 1084 if [ -f $_cur ]; then 1085 # no archive, or current newer than archive 1086 if [ ! -f $_cur,v -o $_cur -nt $_cur,v ]; then 1087 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur 1088 rcs -q -kb -U $_cur 1089 co -q -f -u $_cur 1090 fi 1091 fi 1092 1093 case $_action in 1094 add|update) 1095 cp -p $_file $_cur 1096 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur 1097 rcs -q -kb -U $_cur 1098 co -q -f -u $_cur 1099 chown root:wheel $_cur $_cur,v 1100 ;; 1101 remove) 1102 cp /dev/null $_cur 1103 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur 1104 rcs -q -kb -U $_cur 1105 chown root:wheel $_cur $_cur,v 1106 rm $_cur 1107 ;; 1108 esac 1109 else 1110 case $_action in 1111 add|update) 1112 if [ -f $_cur ]; then 1113 cp -p $_cur $_back 1114 fi 1115 cp -p $_file $_cur 1116 chown root:wheel $_cur 1117 ;; 1118 remove) 1119 mv -f $_cur $_back 1120 ;; 1121 esac 1122 fi 1123} 1124 1125# make_symlink src link 1126# Make a symbolic link 'link' to src from basedir. If the 1127# directory in which link is to be created does not exist 1128# a warning will be displayed and an error will be returned. 1129# Returns 0 on sucess, 1 otherwise. 1130# 1131make_symlink() 1132{ 1133 local src link linkdir _me 1134 src="$1" 1135 link="$2" 1136 linkdir="`dirname $link`" 1137 _me="make_symlink()" 1138 1139 if [ -z "$src" -o -z "$link" ]; then 1140 warn "$_me: requires two arguments." 1141 return 1 1142 fi 1143 if [ ! -d "$linkdir" ]; then 1144 warn "$_me: the directory $linkdir does not exist." 1145 return 1 1146 fi 1147 if ! ln -sf $src $link; then 1148 warn "$_me: unable to make a symbolic link from $link to $src" 1149 return 1 1150 fi 1151 return 0 1152} 1153 1154# devfs_rulesets_from_file file 1155# Reads a set of devfs commands from file, and creates 1156# the specified rulesets with their rules. Returns non-zero 1157# if there was an error. 1158# 1159devfs_rulesets_from_file() 1160{ 1161 local file _err _me 1162 file="$1" 1163 _me="devfs_rulesets_from_file" 1164 _err=0 1165 1166 if [ -z "$file" ]; then 1167 warn "$_me: you must specify a file" 1168 return 1 1169 fi 1170 if [ ! -e "$file" ]; then 1171 debug "$_me: no such file ($file)" 1172 return 0 1173 fi 1174 debug "reading rulesets from file ($file)" 1175 { while read line 1176 do 1177 case $line in 1178 \#*) 1179 continue 1180 ;; 1181 \[*\]*) 1182 rulenum=`expr "$line" : "\[.*=\([0-9]*\)\]"` 1183 if [ -z "$rulenum" ]; then 1184 warn "$_me: cannot extract rule number ($line)" 1185 _err=1 1186 break 1187 fi 1188 rulename=`expr "$line" : "\[\(.*\)=[0-9]*\]"` 1189 if [ -z "$rulename" ]; then 1190 warn "$_me: cannot extract rule name ($line)" 1191 _err=1 1192 break; 1193 fi 1194 eval $rulename=\$rulenum 1195 debug "found ruleset: $rulename=$rulenum" 1196 if ! /sbin/devfs rule -s $rulenum delset; then 1197 _err=1 1198 break 1199 fi 1200 ;; 1201 *) 1202 rulecmd="${line%%"\#*"}" 1203 # evaluate the command incase it includes 1204 # other rules 1205 if [ -n "$rulecmd" ]; then 1206 debug "adding rule ($rulecmd)" 1207 if ! eval /sbin/devfs rule -s $rulenum $rulecmd 1208 then 1209 _err=1 1210 break 1211 fi 1212 fi 1213 ;; 1214 esac 1215 if [ $_err -ne 0 ]; then 1216 debug "error in $_me" 1217 break 1218 fi 1219 done } < $file 1220 return $_err 1221} 1222 1223# devfs_init_rulesets 1224# Initializes rulesets from configuration files. Returns 1225# non-zero if there was an error. 1226# 1227devfs_init_rulesets() 1228{ 1229 local file _me 1230 _me="devfs_init_rulesets" 1231 1232 # Go through this only once 1233 if [ -n "$devfs_rulesets_init" ]; then 1234 debug "$_me: devfs rulesets already initialized" 1235 return 1236 fi 1237 for file in $devfs_rulesets; do 1238 devfs_rulesets_from_file $file || return 1 1239 done 1240 devfs_rulesets_init=1 1241 debug "$_me: devfs rulesets initialized" 1242 return 0 1243} 1244 1245# devfs_set_ruleset ruleset [dir] 1246# Sets the default ruleset of dir to ruleset. The ruleset argument 1247# must be a ruleset name as specified in devfs.rules(5) file. 1248# Returns non-zero if it could not set it successfully. 1249# 1250devfs_set_ruleset() 1251{ 1252 local devdir rs _me 1253 [ -n "$1" ] && eval rs=\$$1 || rs= 1254 [ -n "$2" ] && devdir="-m "$2"" || devdir= 1255 _me="devfs_set_ruleset" 1256 1257 if [ -z "$rs" ]; then 1258 warn "$_me: you must specify a ruleset number" 1259 return 1 1260 fi 1261 debug "$_me: setting ruleset ($rs) on mount-point (${devdir#-m })" 1262 if ! /sbin/devfs $devdir ruleset $rs; then 1263 warn "$_me: unable to set ruleset $rs to ${devdir#-m }" 1264 return 1 1265 fi 1266 return 0 1267} 1268 1269# devfs_apply_ruleset ruleset [dir] 1270# Apply ruleset number $ruleset to the devfs mountpoint $dir. 1271# The ruleset argument must be a ruleset name as specified 1272# in a devfs.rules(5) file. Returns 0 on success or non-zero 1273# if it could not apply the ruleset. 1274# 1275devfs_apply_ruleset() 1276{ 1277 local devdir rs _me 1278 [ -n "$1" ] && eval rs=\$$1 || rs= 1279 [ -n "$2" ] && devdir="-m "$2"" || devdir= 1280 _me="devfs_apply_ruleset" 1281 1282 if [ -z "$rs" ]; then 1283 warn "$_me: you must specify a ruleset" 1284 return 1 1285 fi 1286 debug "$_me: applying ruleset ($rs) to mount-point (${devdir#-m })" 1287 if ! /sbin/devfs $devdir rule -s $rs applyset; then 1288 warn "$_me: unable to apply ruleset $rs to ${devdir#-m }" 1289 return 1 1290 fi 1291 return 0 1292} 1293 1294# devfs_domount dir [ruleset] 1295# Mount devfs on dir. If ruleset is specified it is set 1296# on the mount-point. It must also be a ruleset name as specified 1297# in a devfs.rules(5) file. Returns 0 on success. 1298# 1299devfs_domount() 1300{ 1301 local devdir rs _me 1302 devdir="$1" 1303 [ -n "$2" ] && rs=$2 || rs= 1304 _me="devfs_domount()" 1305 1306 if [ -z "$devdir" ]; then 1307 warn "$_me: you must specify a mount-point" 1308 return 1 1309 fi 1310 debug "$_me: mount-point is ($devdir), ruleset is ($rs)" 1311 if ! mount -t devfs dev "$devdir"; then 1312 warn "$_me: Unable to mount devfs on $devdir" 1313 return 1 1314 fi 1315 if [ -n "$rs" ]; then 1316 devfs_init_rulesets 1317 devfs_set_ruleset $rs $devdir 1318 devfs -m $devdir rule applyset 1319 fi 1320 return 0 1321} 1322 1323# devfs_mount_jail dir [ruleset] 1324# Mounts a devfs file system appropriate for jails 1325# on the directory dir. If ruleset is specified, the ruleset 1326# it names will be used instead. If present, ruleset must 1327# be the name of a ruleset as defined in a devfs.rules(5) file. 1328# This function returns non-zero if an error occurs. 1329# 1330devfs_mount_jail() 1331{ 1332 local jdev rs _me 1333 jdev="$1" 1334 [ -n "$2" ] && rs=$2 || rs="devfsrules_jail" 1335 _me="devfs_mount_jail" 1336 1337 devfs_init_rulesets 1338 if ! devfs_domount "$jdev" $rs; then 1339 warn "$_me: devfs was not mounted on $jdev" 1340 return 1 1341 fi 1342 return 0 1343} 1344 1345# Provide a function for normalizing the mounting of memory 1346# filesystems. This should allow the rest of the code here to remain 1347# as close as possible between 5-current and 4-stable. 1348# $1 = size 1349# $2 = mount point 1350# $3 = (optional) extra mdmfs flags 1351mount_md() 1352{ 1353 if [ -n "$3" ]; then 1354 flags="$3" 1355 fi 1356 /sbin/mdmfs $flags -s $1 md $2 1357} 1358 1359# Code common to scripts that need to load a kernel module 1360# if it isn't in the kernel yet. Syntax: 1361# load_kld [-e regex] [-m module] file 1362# where -e or -m chooses the way to check if the module 1363# is already loaded: 1364# regex is egrep'd in the output from `kldstat -v', 1365# module is passed to `kldstat -m'. 1366# The default way is as though `-m file' were specified. 1367load_kld() 1368{ 1369 local _loaded _mod _opt _re 1370 1371 while getopts "e:m:" _opt; do 1372 case "$_opt" in 1373 e) _re="$OPTARG" ;; 1374 m) _mod="$OPTARG" ;; 1375 *) err 3 'USAGE: load_kld [-e regex] [-m module] file' ;; 1376 esac 1377 done 1378 shift $(($OPTIND - 1)) 1379 if [ $# -ne 1 ]; then 1380 err 3 'USAGE: load_kld [-e regex] [-m module] file' 1381 fi 1382 _mod=${_mod:-$1} 1383 _loaded=false 1384 if [ -n "$_re" ]; then 1385 if kldstat -v | egrep -q -e "$_re"; then 1386 _loaded=true 1387 fi 1388 else 1389 if kldstat -q -m "$_mod"; then 1390 _loaded=true 1391 fi 1392 fi 1393 if ! $_loaded; then 1394 if ! kldload "$1"; then 1395 warn "Unable to load kernel module $1" 1396 return 1 1397 else 1398 info "$1 kernel module loaded." 1399 fi 1400 else 1401 debug "load_kld: $1 kernel module already loaded." 1402 fi 1403 return 0 1404} 1405 1406# ltr str src dst 1407# Change every $src in $str to $dst. 1408# Useful when /usr is not yet mounted and we cannot use tr(1), sed(1) nor 1409# awk(1). 1410ltr() 1411{ 1412 local _str _src _dst _out _com 1413 _str=$1 1414 _src=$2 1415 _dst=$3 1416 _out="" 1417 1418 IFS=${_src} 1419 for _com in ${_str}; do 1420 if [ -z "${_out}" ]; then 1421 _out="${_com}" 1422 else 1423 _out="${_out}${_dst}${_com}" 1424 fi 1425 done 1426 echo "${_out}" 1427} 1428 1429# Creates a list of providers for GELI encryption. 1430geli_make_list() 1431{ 1432 local devices devices2 1433 local provider mountpoint type options rest 1434 1435 # Create list of GELI providers from fstab. 1436 while read provider mountpoint type options rest ; do 1437 case ":${options}" in 1438 :*noauto*) 1439 noauto=yes 1440 ;; 1441 *) 1442 noauto=no 1443 ;; 1444 esac 1445 1446 case ":${provider}" in 1447 :#*) 1448 continue 1449 ;; 1450 *.eli) 1451 # Skip swap devices. 1452 if [ "${type}" = "swap" -o "${options}" = "sw" -o "${noauto}" = "yes" ]; then 1453 continue 1454 fi 1455 devices="${devices} ${provider}" 1456 ;; 1457 esac 1458 done < /etc/fstab 1459 1460 # Append providers from geli_devices. 1461 devices="${devices} ${geli_devices}" 1462 1463 for provider in ${devices}; do 1464 provider=${provider%.eli} 1465 provider=${provider#/dev/} 1466 devices2="${devices2} ${provider}" 1467 done 1468 1469 echo ${devices2} 1470} 1471 1472# Find scripts in local_startup directories that use the old syntax 1473# 1474find_local_scripts_old () { 1475 zlist='' 1476 slist='' 1477 for dir in ${local_startup}; do 1478 if [ -d "${dir}" ]; then 1479 for file in ${dir}/[0-9]*.sh; do 1480 grep '^# PROVIDE:' $file >/dev/null 2>&1 && 1481 continue 1482 zlist="$zlist $file" 1483 done 1484 for file in ${dir}/[^0-9]*.sh; do 1485 grep '^# PROVIDE:' $file >/dev/null 2>&1 && 1486 continue 1487 slist="$slist $file" 1488 done 1489 fi 1490 done 1491} 1492 1493find_local_scripts_new () { 1494 local_rc='' 1495 for dir in ${local_startup}; do 1496 if [ -d "${dir}" ]; then 1497 for file in `grep -l '^# PROVIDE:' ${dir}/* 2>/dev/null`; do 1498 case "$file" in 1499 *.sample) ;; 1500 *) if [ -x "$file" ]; then 1501 local_rc="${local_rc} ${file}" 1502 fi 1503 ;; 1504 esac 1505 done 1506 fi 1507 done 1508} 1509 1510fi 1511 1512_rc_subr_loaded=: 1513