rc.subr revision 152519
1# $NetBSD: rc.subr,v 1.60 2003/07/26 05:13:47 lukem Exp $ 2# $FreeBSD: head/etc/rc.subr 152519 2005-11-16 10:45:19Z yar $ 3# 4# Copyright (c) 1997-2002 The NetBSD Foundation, Inc. 5# All rights reserved. 6# 7# This code is derived from software contributed to The NetBSD Foundation 8# by Luke Mewburn. 9# 10# Redistribution and use in source and binary forms, with or without 11# modification, are permitted provided that the following conditions 12# are met: 13# 1. Redistributions of source code must retain the above copyright 14# notice, this list of conditions and the following disclaimer. 15# 2. Redistributions in binary form must reproduce the above copyright 16# notice, this list of conditions and the following disclaimer in the 17# documentation and/or other materials provided with the distribution. 18# 3. All advertising materials mentioning features or use of this software 19# must display the following acknowledgement: 20# This product includes software developed by the NetBSD 21# Foundation, Inc. and its contributors. 22# 4. Neither the name of The NetBSD Foundation nor the names of its 23# contributors may be used to endorse or promote products derived 24# from this software without specific prior written permission. 25# 26# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 27# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 28# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 29# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 30# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 31# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 32# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 33# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 34# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 35# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 36# POSSIBILITY OF SUCH DAMAGE. 37# 38# rc.subr 39# functions used by various rc scripts 40# 41 42# 43# Operating System dependent/independent variables 44# 45 46if [ -z "${_rc_subr_loaded}" ]; then 47 48_rc_subr_loaded="YES" 49 50SYSCTL="/sbin/sysctl" 51SYSCTL_N="${SYSCTL} -n" 52CMD_OSTYPE="${SYSCTL_N} kern.ostype" 53OSTYPE=`${CMD_OSTYPE}` 54ID="/usr/bin/id" 55IDCMD="if [ -x $ID ]; then $ID -un; fi" 56 57case ${OSTYPE} in 58FreeBSD) 59 SYSCTL_W="${SYSCTL}" 60 ;; 61NetBSD) 62 SYSCTL_W="${SYSCTL} -w" 63 ;; 64esac 65 66# 67# functions 68# --------- 69 70# 71# set_rcvar base_var 72# Set the variable name enabling a specific service. 73# FreeBSD uses ${service}_enable, while NetBSD uses 74# just the name of the service. For example: 75# FreeBSD: sendmail_enable="YES" 76# NetBSD : sendmail="YES" 77# $1 - if $name is not the base to work of off, specify 78# a different one 79# 80set_rcvar() 81{ 82 if [ -z "$1" ]; then 83 base_var=${name} 84 else 85 base_var="$1" 86 fi 87 88 case ${OSTYPE} in 89 FreeBSD) 90 echo ${base_var}_enable 91 ;; 92 NetBSD) 93 echo ${base_var} 94 ;; 95 *) 96 echo 'XXX' 97 ;; 98 esac 99} 100 101# 102# force_depend script 103# Force a service to start. Intended for use by services 104# to resolve dependency issues. It is assumed the caller 105# has check to make sure this call is necessary 106# $1 - filename of script, in /etc/rc.d, to run 107# 108force_depend() 109{ 110 _depend="$1" 111 112 info "${name} depends on ${_depend}, which will be forced to start." 113 if ! /etc/rc.d/${_depend} forcestart; then 114 warn "Unable to force ${_depend}. It may already be running." 115 return 1 116 fi 117 return 0 118} 119 120# 121# checkyesno var 122# Test $1 variable, and warn if not set to YES or NO. 123# Return 0 if it's "yes" (et al), nonzero otherwise. 124# 125checkyesno() 126{ 127 eval _value=\$${1} 128 debug "checkyesno: $1 is set to $_value." 129 case $_value in 130 131 # "yes", "true", "on", or "1" 132 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 133 return 0 134 ;; 135 136 # "no", "false", "off", or "0" 137 [Nn][Oo]|[Ff][Aa][Ll][Ss][Ee]|[Oo][Ff][Ff]|0) 138 return 1 139 ;; 140 *) 141 warn "\$${1} is not set properly - see rc.conf(5)." 142 return 1 143 ;; 144 esac 145} 146 147# reverse_list list 148# print the list in reverse order 149# 150reverse_list() 151{ 152 _revlist= 153 for _revfile; do 154 _revlist="$_revfile $_revlist" 155 done 156 echo $_revlist 157} 158 159# 160# mount_critical_filesystems type 161# Go through the list of critical filesystems as provided in 162# the rc.conf(5) variable $critical_filesystems_${type}, checking 163# each one to see if it is mounted, and if it is not, mounting it. 164# 165mount_critical_filesystems() 166{ 167 eval _fslist=\$critical_filesystems_${1} 168 for _fs in $_fslist; do 169 mount | ( 170 _ismounted=false 171 while read what _on on _type type; do 172 if [ $on = $_fs ]; then 173 _ismounted=true 174 fi 175 done 176 if $_ismounted; then 177 : 178 else 179 mount $_fs >/dev/null 2>&1 180 fi 181 ) 182 done 183} 184 185# 186# check_pidfile pidfile procname [interpreter] 187# Parses the first line of pidfile for a PID, and ensures 188# that the process is running and matches procname. 189# Prints the matching PID upon success, nothing otherwise. 190# interpreter is optional; see _find_processes() for details. 191# 192check_pidfile() 193{ 194 _pidfile=$1 195 _procname=$2 196 _interpreter=$3 197 if [ -z "$_pidfile" -o -z "$_procname" ]; then 198 err 3 'USAGE: check_pidfile pidfile procname [interpreter]' 199 fi 200 if [ ! -f $_pidfile ]; then 201 debug "pid file ($_pidfile): not readable." 202 return 203 fi 204 read _pid _junk < $_pidfile 205 if [ -z "$_pid" ]; then 206 debug "pid file ($_pidfile): no pid in file." 207 return 208 fi 209 _find_processes $_procname ${_interpreter:-.} '-p '"$_pid" 210} 211 212# 213# check_process procname [interpreter] 214# Ensures that a process (or processes) named procname is running. 215# Prints a list of matching PIDs. 216# interpreter is optional; see _find_processes() for details. 217# 218check_process() 219{ 220 _procname=$1 221 _interpreter=$2 222 if [ -z "$_procname" ]; then 223 err 3 'USAGE: check_process procname [interpreter]' 224 fi 225 _find_processes $_procname ${_interpreter:-.} '-ax' 226} 227 228# 229# _find_processes procname interpreter psargs 230# Search for procname in the output of ps generated by psargs. 231# Prints the PIDs of any matching processes, space separated. 232# 233# If interpreter == ".", check the following variations of procname 234# against the first word of each command: 235# procname 236# `basename procname` 237# `basename procname` + ":" 238# "(" + `basename procname` + ")" 239# 240# If interpreter != ".", read the first line of procname, remove the 241# leading #!, normalise whitespace, append procname, and attempt to 242# match that against each command, either as is, or with extra words 243# at the end. 244# 245_find_processes() 246{ 247 if [ $# -ne 3 ]; then 248 err 3 'USAGE: _find_processes procname interpreter psargs' 249 fi 250 _procname=$1 251 _interpreter=$2 252 _psargs=$3 253 254 _pref= 255 if [ $_interpreter != "." ]; then # an interpreted script 256 read _interp < $_procname # read interpreter name 257 _interp=${_interp#\#!} # strip #! 258 set -- $_interp 259 if [ $_interpreter != $1 ]; then 260 warn "\$command_interpreter $_interpreter != $1" 261 fi 262 _interp="$* $_procname" # cleanup spaces, add _procname 263 _fp_args='_argv' 264 _fp_match='case "$_argv" in 265 ${_interp}|"${_interp} "*)' 266 else # a normal daemon 267 _procnamebn=${_procname##*/} 268 _fp_args='_arg0 _argv' 269 _fp_match='case "$_arg0" in 270 $_procname|$_procnamebn|${_procnamebn}:|"(${_procnamebn})"|"[${_procnamebn}]")' 271 fi 272 273 _proccheck=' 274 ps 2>/dev/null -o "pid,command" '"$_psargs"' | 275 while read _npid '"$_fp_args"'; do 276 case "$_npid" in 277 PID) 278 continue;; 279 esac; '"$_fp_match"' 280 echo -n "$_pref$_npid"; 281 _pref=" " 282 ;; 283 esac 284 done' 285 286# debug "in _find_processes: proccheck is ($_proccheck)." 287 eval $_proccheck 288} 289 290# 291# wait_for_pids pid [pid ...] 292# spins until none of the pids exist 293# 294wait_for_pids() 295{ 296 _list="$@" 297 if [ -z "$_list" ]; then 298 return 299 fi 300 _prefix= 301 while true; do 302 _nlist=""; 303 for _j in $_list; do 304 if kill -0 $_j 2>/dev/null; then 305 _nlist="${_nlist}${_nlist:+ }$_j" 306 fi 307 done 308 if [ -z "$_nlist" ]; then 309 break 310 fi 311 _list=$_nlist 312 echo -n ${_prefix:-"Waiting for PIDS: "}$_list 313 _prefix=", " 314 sleep 2 315 done 316 if [ -n "$_prefix" ]; then 317 echo "." 318 fi 319} 320 321# 322# run_rc_command argument 323# Search for argument in the list of supported commands, which is: 324# "start stop restart rcvar status poll ${extra_commands}" 325# If there's a match, run ${argument}_cmd or the default method 326# (see below). 327# 328# If argument has a given prefix, then change the operation as follows: 329# Prefix Operation 330# ------ --------- 331# fast Skip the pid check, and set rc_fast=yes 332# force Set ${rcvar} to YES, and set rc_force=yes 333# one Set ${rcvar} to YES 334# 335# The following globals are used: 336# 337# Name Needed Purpose 338# ---- ------ ------- 339# name y Name of script. 340# 341# command n Full path to command. 342# Not needed if ${rc_arg}_cmd is set for 343# each keyword. 344# 345# command_args n Optional args/shell directives for command. 346# 347# command_interpreter n If not empty, command is interpreted, so 348# call check_{pidfile,process}() appropriately. 349# 350# extra_commands n List of extra commands supported. 351# 352# pidfile n If set, use check_pidfile $pidfile $command, 353# otherwise use check_process $command. 354# In either case, only check if $command is set. 355# 356# procname n Process name to check for instead of $command. 357# 358# rcvar n This is checked with checkyesno to determine 359# if the action should be run. 360# 361# ${name}_chroot n Directory to chroot to before running ${command} 362# Requires /usr to be mounted. 363# 364# ${name}_chdir n Directory to cd to before running ${command} 365# (if not using ${name}_chroot). 366# 367# ${name}_flags n Arguments to call ${command} with. 368# NOTE: $flags from the parent environment 369# can be used to override this. 370# 371# ${name}_nice n Nice level to run ${command} at. 372# 373# ${name}_user n User to run ${command} as, using su(1) if not 374# using ${name}_chroot. 375# Requires /usr to be mounted. 376# 377# ${name}_group n Group to run chrooted ${command} as. 378# Requires /usr to be mounted. 379# 380# ${name}_groups n Comma separated list of supplementary groups 381# to run the chrooted ${command} with. 382# Requires /usr to be mounted. 383# 384# ${rc_arg}_cmd n If set, use this as the method when invoked; 385# Otherwise, use default command (see below) 386# 387# ${rc_arg}_precmd n If set, run just before performing the 388# ${rc_arg}_cmd method in the default 389# operation (i.e, after checking for required 390# bits and process (non)existence). 391# If this completes with a non-zero exit code, 392# don't run ${rc_arg}_cmd. 393# 394# ${rc_arg}_postcmd n If set, run just after performing the 395# ${rc_arg}_cmd method, if that method 396# returned a zero exit code. 397# 398# required_dirs n If set, check for the existence of the given 399# directories before running the default 400# (re)start command. 401# 402# required_files n If set, check for the readability of the given 403# files before running the default (re)start 404# command. 405# 406# required_vars n If set, perform checkyesno on each of the 407# listed variables before running the default 408# (re)start command. 409# 410# Default behaviour for a given argument, if no override method is 411# provided: 412# 413# Argument Default behaviour 414# -------- ----------------- 415# start if !running && checkyesno ${rcvar} 416# ${command} 417# 418# stop if ${pidfile} 419# rc_pid=$(check_pidfile $pidfile $command) 420# else 421# rc_pid=$(check_process $command) 422# kill $sig_stop $rc_pid 423# wait_for_pids $rc_pid 424# ($sig_stop defaults to TERM.) 425# 426# reload Similar to stop, except use $sig_reload instead, 427# and doesn't wait_for_pids. 428# $sig_reload defaults to HUP. 429# Note that `reload' isn't provided by default, 430# it should be enabled via $extra_commands. 431# 432# restart Run `stop' then `start'. 433# 434# status Show if ${command} is running, etc. 435# 436# poll Wait for ${command} to exit. 437# 438# rcvar Display what rc.conf variable is used (if any). 439# 440# Variables available to methods, and after run_rc_command() has 441# completed: 442# 443# Variable Purpose 444# -------- ------- 445# rc_arg Argument to command, after fast/force/one processing 446# performed 447# 448# rc_flags Flags to start the default command with. 449# Defaults to ${name}_flags, unless overridden 450# by $flags from the environment. 451# This variable may be changed by the precmd method. 452# 453# rc_pid PID of command (if appropriate) 454# 455# rc_fast Not empty if "fast" was provided (q.v.) 456# 457# rc_force Not empty if "force" was provided (q.v.) 458# 459# 460run_rc_command() 461{ 462 _return=0 463 rc_arg=$1 464 if [ -z "$name" ]; then 465 err 3 'run_rc_command: $name is not set.' 466 fi 467 468 # Don't repeat the first argument when passing additional command- 469 # line arguments to the command subroutines. 470 # 471 shift 1 472 rc_extra_args="$*" 473 474 _rc_prefix= 475 case "$rc_arg" in 476 fast*) # "fast" prefix; don't check pid 477 rc_arg=${rc_arg#fast} 478 rc_fast=yes 479 ;; 480 force*) # "force prefix; always run 481 rc_force=yes 482 _rc_prefix=force 483 rc_arg=${rc_arg#${_rc_prefix}} 484 if [ -n "${rcvar}" ]; then 485 eval ${rcvar}=YES 486 fi 487 ;; 488 one*) # "one" prefix; set ${rcvar}=yes 489 _rc_prefix=one 490 rc_arg=${rc_arg#${_rc_prefix}} 491 if [ -n "${rcvar}" ]; then 492 eval ${rcvar}=YES 493 fi 494 ;; 495 esac 496 497 eval _overide_command=\$${name}_program 498 command=${command:+${_overide_command:-$command}} 499 500 _keywords="start stop restart rcvar $extra_commands" 501 rc_pid= 502 _pidcmd= 503 _procname=${procname:-${command}} 504 505 # setup pid check command 506 if [ -n "$_procname" ]; then 507 if [ -n "$pidfile" ]; then 508 _pidcmd='rc_pid=$(check_pidfile '"$pidfile $_procname $command_interpreter"')' 509 else 510 _pidcmd='rc_pid=$(check_process '"$_procname $command_interpreter"')' 511 fi 512 if [ -n "$_pidcmd" ]; then 513 _keywords="${_keywords} status poll" 514 fi 515 fi 516 517 if [ -z "$rc_arg" ]; then 518 rc_usage $_keywords 519 fi 520 521 if [ -n "$flags" ]; then # allow override from environment 522 rc_flags=$flags 523 else 524 eval rc_flags=\$${name}_flags 525 fi 526 eval _chdir=\$${name}_chdir _chroot=\$${name}_chroot \ 527 _nice=\$${name}_nice _user=\$${name}_user \ 528 _group=\$${name}_group _groups=\$${name}_groups 529 530 if [ -n "$_user" ]; then # unset $_user if running as that user 531 if [ "$_user" = "$(eval $IDCMD)" ]; then 532 unset _user 533 fi 534 fi 535 536 # if ${rcvar} is set, and $1 is not 537 # "rcvar", then run 538 # checkyesno ${rcvar} 539 # and return if that failed 540 # 541 if [ -n "${rcvar}" -a "$rc_arg" != "rcvar" ]; then 542 if ! checkyesno ${rcvar}; then 543 return 0 544 fi 545 fi 546 547 eval $_pidcmd # determine the pid if necessary 548 549 for _elem in $_keywords; do 550 if [ "$_elem" != "$rc_arg" ]; then 551 continue 552 fi 553 554 # if there's a custom ${XXX_cmd}, 555 # run that instead of the default 556 # 557 eval _cmd=\$${rc_arg}_cmd _precmd=\$${rc_arg}_precmd \ 558 _postcmd=\$${rc_arg}_postcmd 559 if [ -n "$_cmd" ]; then 560 # if the precmd failed and force 561 # isn't set, exit 562 # 563 if [ -n "$_precmd" ]; then 564 debug "run_rc_command: evaluating ${_precmd}()." 565 eval $_precmd $rc_extra_args 566 _return=$? 567 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 568 return 1 569 fi 570 571 if [ -n "$_cmd" ]; then 572 debug "run_rc_command: evaluating ${_cmd}()." 573 eval $_cmd $rc_extra_args 574 _return=$? 575 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 576 return 1 577 fi 578 579 if [ -n "$_postcmd" ]; then 580 debug "run_rc_command: evaluating ${_postcmd}()." 581 eval $_postcmd $rc_extra_args 582 _return=$? 583 fi 584 return $_return 585 fi 586 587 case "$rc_arg" in # default operations... 588 589 status) 590 if [ -n "$rc_pid" ]; then 591 echo "${name} is running as pid $rc_pid." 592 else 593 echo "${name} is not running." 594 return 1 595 fi 596 ;; 597 598 start) 599 if [ -z "$rc_fast" -a -n "$rc_pid" ]; then 600 echo "${name} already running? (pid=$rc_pid)." 601 exit 1 602 fi 603 604 if [ ! -x ${_chroot}${command} ]; then 605 info "run_rc_command: cannot run ($command)." 606 return 0 607 fi 608 609 # check for required variables, 610 # directories, and files 611 # 612 for _f in $required_vars; do 613 if ! checkyesno $_f; then 614 warn "\$${_f} is not set." 615 if [ -z "$rc_force" ]; then 616 return 1 617 fi 618 fi 619 done 620 for _f in $required_dirs; do 621 if [ ! -d "${_f}/." ]; then 622 warn "${_f} is not a directory." 623 if [ -z "$rc_force" ]; then 624 return 1 625 fi 626 fi 627 done 628 for _f in $required_files; do 629 if [ ! -r "${_f}" ]; then 630 warn "${_f} is not readable." 631 if [ -z "$rc_force" ]; then 632 return 1 633 fi 634 fi 635 done 636 637 # if the precmd failed and force 638 # isn't set, exit 639 # 640 if [ -n "${_precmd}" ]; then 641 debug "run_rc_command: evaluating ${_precmd}()." 642 eval $_precmd 643 _return=$? 644 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 645 return 1 646 fi 647 648 # setup the command to run, and run it 649 # 650 echo "Starting ${name}." 651 if [ -n "$_chroot" ]; then 652 _doit="\ 653${_nice:+nice -n $_nice }\ 654chroot ${_user:+-u $_user }${_group:+-g $_group }${_groups:+-G $_groups }\ 655$_chroot $command $rc_flags $command_args" 656 else 657 _doit="\ 658${_chdir:+cd $_chdir; }\ 659${_nice:+nice -n $_nice }\ 660$command $rc_flags $command_args" 661 if [ -n "$_user" ]; then 662 _doit="su -m $_user -c 'sh -c \"$_doit\"'" 663 fi 664 fi 665 666 # if the cmd failed and force 667 # isn't set, exit 668 # 669 debug "run_rc_command: _doit: $_doit" 670 eval $_doit 671 _return=$? 672 [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 673 674 # finally, run postcmd 675 # 676 if [ -n "${_postcmd}" ]; then 677 debug "run_rc_command: evaluating ${_postcmd}()." 678 eval $_postcmd 679 fi 680 ;; 681 682 stop) 683 if [ -z "$rc_pid" ]; then 684 [ -n "$rc_fast" ] && exit 0 685 if [ -n "$pidfile" ]; then 686 echo \ 687 "${name} not running? (check $pidfile)." 688 else 689 echo "${name} not running?" 690 fi 691 exit 1 692 fi 693 694 # if the precmd failed and force 695 # isn't set, exit 696 # 697 if [ -n "$_precmd" ]; then 698 eval $_precmd 699 _return=$? 700 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 701 return 1 702 fi 703 704 # send the signal to stop 705 # 706 echo "Stopping ${name}." 707 _doit="kill -${sig_stop:-TERM} $rc_pid" 708 if [ -n "$_user" ]; then 709 _doit="su -m $_user -c 'sh -c \"$_doit\"'" 710 fi 711 712 # if the stop cmd failed and force 713 # isn't set, exit 714 # 715 eval $_doit 716 _return=$? 717 [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 718 719 # wait for the command to exit, 720 # and run postcmd. 721 wait_for_pids $rc_pid 722 if [ -n "$_postcmd" ]; then 723 eval $_postcmd 724 _return=$? 725 fi 726 ;; 727 728 reload) 729 if [ -z "$rc_pid" ]; then 730 if [ -n "$pidfile" ]; then 731 echo \ 732 "${name} not running? (check $pidfile)." 733 else 734 echo "${name} not running?" 735 fi 736 exit 1 737 fi 738 echo "Reloading ${name} config files." 739 if [ -n "$_precmd" ]; then 740 eval $_precmd 741 _return=$? 742 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 743 return 1 744 fi 745 _doit="kill -${sig_reload:-HUP} $rc_pid" 746 if [ -n "$_user" ]; then 747 _doit="su -m $_user -c 'sh -c \"$_doit\"'" 748 fi 749 eval $_doit 750 _return=$? 751 [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 752 if [ -n "$_postcmd" ]; then 753 eval $_postcmd 754 _return=$? 755 fi 756 ;; 757 758 restart) 759 if [ -n "$_precmd" ]; then 760 eval $_precmd $rc_extra_args 761 _return=$? 762 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 763 return 1 764 fi 765 # prevent restart being called more 766 # than once by any given script 767 # 768 if ${_rc_restart_done:-false}; then 769 return 0 770 fi 771 _rc_restart_done=true 772 773 # run stop in a subshell to keep variables for start 774 ( run_rc_command ${_rc_prefix}stop $rc_extra_args ) 775 run_rc_command ${_rc_prefix}start $rc_extra_args 776 777 if [ -n "$_postcmd" ]; then 778 eval $_postcmd $rc_extra_args 779 _return=$? 780 fi 781 ;; 782 783 poll) 784 if [ -n "$rc_pid" ]; then 785 wait_for_pids $rc_pid 786 fi 787 ;; 788 789 rcvar) 790 echo "# $name" 791 if [ -n "$rcvar" ]; then 792 if checkyesno ${rcvar}; then 793 echo "\$${rcvar}=YES" 794 else 795 echo "\$${rcvar}=NO" 796 fi 797 fi 798 ;; 799 800 *) 801 rc_usage $_keywords 802 ;; 803 804 esac 805 return $_return 806 done 807 808 echo 1>&2 "$0: unknown directive '$rc_arg'." 809 rc_usage $_keywords 810 exit 1 811} 812 813# 814# run_rc_script file arg 815# Start the script `file' with `arg', and correctly handle the 816# return value from the script. If `file' ends with `.sh', it's 817# sourced into the current environment. If `file' appears to be 818# a backup or scratch file, ignore it. Otherwise if it's 819# executable run as a child process. 820# 821run_rc_script() 822{ 823 _file=$1 824 _arg=$2 825 if [ -z "$_file" -o -z "$_arg" ]; then 826 err 3 'USAGE: run_rc_script file arg' 827 fi 828 829 unset name command command_args command_interpreter \ 830 extra_commands pidfile procname \ 831 rcvar required_dirs required_files required_vars 832 eval unset ${_arg}_cmd ${_arg}_precmd ${_arg}_postcmd 833 834 case "$_file" in 835 *.sh) # run in current shell 836 set $_arg; . $_file 837 ;; 838 *[~#]|*.OLD|*.orig|*,v) # scratch file; skip 839 warn "Ignoring scratch file $_file" 840 ;; 841 *) # run in subshell 842 if [ -x $_file ]; then 843 if [ -n "$rc_fast_and_loose" ]; then 844 set $_arg; . $_file 845 else 846 ( trap "echo Script $_file interrupted; kill -QUIT $$" 3 847 trap "echo Script $_file interrupted; exit 1" 2 848 set $_arg; . $_file ) 849 fi 850 fi 851 ;; 852 esac 853} 854 855# 856# load_rc_config 857# Source in the configuration file for a given command. 858# 859load_rc_config() 860{ 861 _command=$1 862 if [ -z "$_command" ]; then 863 err 3 'USAGE: load_rc_config command' 864 fi 865 866 if ${_rc_conf_loaded:-false}; then 867 : 868 else 869 if [ -r /etc/defaults/rc.conf ]; then 870 debug "Sourcing /etc/defaults/rc.conf" 871 . /etc/defaults/rc.conf 872 source_rc_confs 873 elif [ -r /etc/rc.conf ]; then 874 debug "Sourcing /etc/rc.conf (/etc/defaults/rc.conf doesn't exist)." 875 . /etc/rc.conf 876 fi 877 _rc_conf_loaded=true 878 fi 879 if [ -f /etc/rc.conf.d/"$_command" ]; then 880 debug "Sourcing /etc/rc.conf.d/${_command}" 881 . /etc/rc.conf.d/"$_command" 882 fi 883 884 # XXX - Deprecated variable name support 885 # 886 case ${OSTYPE} in 887 FreeBSD) 888 [ -n "$portmap_enable" ] && rpcbind_enable="$portmap_enable" 889 [ -n "$portmap_program" ] && rpcbind_program="$portmap_program" 890 [ -n "$portmap_flags" ] && rpcbind_flags="$portmap_flags" 891 [ -n "$single_mountd_enable" ] && mountd_enable="$single_mountd_enable" 892 [ -n "$xntpd_enable" ] && ntpd_enable="$xntpd_enable" 893 [ -n "$xntpd_program" ] && ntpd_program="$xntpd_program" 894 [ -n "$xntpd_flags" ] && ntpd_flags="$xntpd_flags" 895 [ -n "$dhcp_program" ] && dhclient_program="$dhcp_program" 896 [ -n "$dhcp_flags" ] && dhclient_flags="$dhcp_flags" 897 ;; 898 esac 899} 900 901# 902# rc_usage commands 903# Print a usage string for $0, with `commands' being a list of 904# valid commands. 905# 906rc_usage() 907{ 908 echo -n 1>&2 "Usage: $0 [fast|force|one](" 909 910 _sep= 911 for _elem; do 912 echo -n 1>&2 "$_sep$_elem" 913 _sep="|" 914 done 915 echo 1>&2 ")" 916 exit 1 917} 918 919# 920# err exitval message 921# Display message to stderr and log to the syslog, and exit with exitval. 922# 923err() 924{ 925 exitval=$1 926 shift 927 928 if [ -x /usr/bin/logger ]; then 929 logger "$0: ERROR: $*" 930 fi 931 echo 1>&2 "$0: ERROR: $*" 932 exit $exitval 933} 934 935# 936# warn message 937# Display message to stderr and log to the syslog. 938# 939warn() 940{ 941 if [ -x /usr/bin/logger ]; then 942 logger "$0: WARNING: $*" 943 fi 944 echo 1>&2 "$0: WARNING: $*" 945} 946 947# 948# info message 949# Display informational message to stdout and log to syslog. 950# 951info() 952{ 953 case ${rc_info} in 954 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 955 if [ -x /usr/bin/logger ]; then 956 logger "$0: INFO: $*" 957 fi 958 echo "$0: INFO: $*" 959 ;; 960 esac 961} 962 963# 964# debug message 965# If debugging is enabled in rc.conf output message to stderr. 966# BEWARE that you don't call any subroutine that itself calls this 967# function. 968# 969debug() 970{ 971 case ${rc_debug} in 972 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 973 if [ -x /usr/bin/logger ]; then 974 logger "$0: INFO: $*" 975 fi 976 echo 1>&2 "$0: DEBUG: $*" 977 ;; 978 esac 979} 980 981# 982# backup_file action file cur backup 983# Make a backup copy of `file' into `cur', and save the previous 984# version of `cur' as `backup' or use rcs for archiving. 985# 986# This routine checks the value of the backup_uses_rcs variable, 987# which can be either YES or NO. 988# 989# The `action' keyword can be one of the following: 990# 991# add `file' is now being backed up (and is possibly 992# being reentered into the backups system). `cur' 993# is created and RCS files, if necessary, are 994# created as well. 995# 996# update `file' has changed and needs to be backed up. 997# If `cur' exists, it is copied to to `back' or 998# checked into RCS (if the repository file is old), 999# and then `file' is copied to `cur'. Another RCS 1000# check in done here if RCS is being used. 1001# 1002# remove `file' is no longer being tracked by the backups 1003# system. If RCS is not being used, `cur' is moved 1004# to `back', otherwise an empty file is checked in, 1005# and then `cur' is removed. 1006# 1007# 1008backup_file() 1009{ 1010 _action=$1 1011 _file=$2 1012 _cur=$3 1013 _back=$4 1014 1015 if checkyesno backup_uses_rcs; then 1016 _msg0="backup archive" 1017 _msg1="update" 1018 1019 # ensure that history file is not locked 1020 if [ -f $_cur,v ]; then 1021 rcs -q -u -U -M $_cur 1022 fi 1023 1024 # ensure after switching to rcs that the 1025 # current backup is not lost 1026 if [ -f $_cur ]; then 1027 # no archive, or current newer than archive 1028 if [ ! -f $_cur,v -o $_cur -nt $_cur,v ]; then 1029 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur 1030 rcs -q -kb -U $_cur 1031 co -q -f -u $_cur 1032 fi 1033 fi 1034 1035 case $_action in 1036 add|update) 1037 cp -p $_file $_cur 1038 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur 1039 rcs -q -kb -U $_cur 1040 co -q -f -u $_cur 1041 chown root:wheel $_cur $_cur,v 1042 ;; 1043 remove) 1044 cp /dev/null $_cur 1045 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur 1046 rcs -q -kb -U $_cur 1047 chown root:wheel $_cur $_cur,v 1048 rm $_cur 1049 ;; 1050 esac 1051 else 1052 case $_action in 1053 add|update) 1054 if [ -f $_cur ]; then 1055 cp -p $_cur $_back 1056 fi 1057 cp -p $_file $_cur 1058 chown root:wheel $_cur 1059 ;; 1060 remove) 1061 mv -f $_cur $_back 1062 ;; 1063 esac 1064 fi 1065} 1066 1067# make_symlink src link 1068# Make a symbolic link 'link' to src from basedir. If the 1069# directory in which link is to be created does not exist 1070# a warning will be displayed and an error will be returned. 1071# Returns 0 on sucess, 1 otherwise. 1072# 1073make_symlink() 1074{ 1075 local src link linkdir _me 1076 src="$1" 1077 link="$2" 1078 linkdir="`dirname $link`" 1079 _me="make_symlink()" 1080 1081 if [ -z "$src" -o -z "$link" ]; then 1082 warn "$_me: requires two arguments." 1083 return 1 1084 fi 1085 if [ ! -d "$linkdir" ]; then 1086 warn "$_me: the directory $linkdir does not exist" 1087 return 1 1088 fi 1089 if ! ln -sf $src $link; then 1090 warn "$_me: unable to make a symbolic link from $link to $src" 1091 return 1 1092 fi 1093 return 0 1094} 1095 1096# devfs_rulesets_from_file file 1097# Reads a set of devfs commands from file, and creates 1098# the specified rulesets with their rules. Returns non-zero 1099# if there was an error. 1100# 1101devfs_rulesets_from_file() 1102{ 1103 local file _err _me 1104 file="$1" 1105 _me="devfs_rulesets_from_file" 1106 _err=0 1107 1108 if [ -z "$file" ]; then 1109 warn "$_me: you must specify a file" 1110 return 1 1111 fi 1112 if [ ! -e "$file" ]; then 1113 debug "$_me: no such file ($file)" 1114 return 0 1115 fi 1116 debug "reading rulesets from file ($file)" 1117 { while read line 1118 do 1119 case $line in 1120 \#*) 1121 continue 1122 ;; 1123 \[*\]*) 1124 rulenum=`expr "$line" : "\[.*=\([0-9]*\)\]"` 1125 if [ -z "$rulenum" ]; then 1126 warn "$_me: cannot extract rule number ($line)" 1127 _err=1 1128 break 1129 fi 1130 rulename=`expr "$line" : "\[\(.*\)=[0-9]*\]"` 1131 if [ -z "$rulename" ]; then 1132 warn "$_me: cannot extract rule name ($line)" 1133 _err=1 1134 break; 1135 fi 1136 eval $rulename=\$rulenum 1137 debug "found ruleset: $rulename=$rulenum" 1138 if ! /sbin/devfs rule -s $rulenum delset; then 1139 _err=1 1140 break 1141 fi 1142 ;; 1143 *) 1144 rulecmd="${line%%"\#*"}" 1145 # evaluate the command incase it includes 1146 # other rules 1147 if [ -n "$rulecmd" ]; then 1148 debug "adding rule ($rulecmd)" 1149 if ! eval /sbin/devfs rule -s $rulenum $rulecmd 1150 then 1151 _err=1 1152 break 1153 fi 1154 fi 1155 ;; 1156 esac 1157 if [ $_err -ne 0 ]; then 1158 debug "error in $_me" 1159 break 1160 fi 1161 done } < $file 1162 return $_err 1163} 1164 1165# devfs_init_rulesets 1166# Initializes rulesets from configuration files. Returns 1167# non-zero if there was an error. 1168# 1169devfs_init_rulesets() 1170{ 1171 local file _me 1172 _me="devfs_init_rulesets" 1173 1174 # Go through this only once 1175 if [ -n "$devfs_rulesets_init" ]; then 1176 debug "$_me: devfs rulesets already initialized" 1177 return 1178 fi 1179 for file in $devfs_rulesets; do 1180 devfs_rulesets_from_file $file || return 1 1181 done 1182 devfs_rulesets_init=1 1183 debug "$_me: devfs rulesets initialized" 1184 return 0 1185} 1186 1187# devfs_set_ruleset ruleset [dir] 1188# Sets the default ruleset of dir to ruleset. The ruleset argument 1189# must be a ruleset name as specified in devfs.rules(5) file. 1190# Returns non-zero if it could not set it successfully. 1191# 1192devfs_set_ruleset() 1193{ 1194 local devdir rs _me 1195 [ -n "$1" ] && eval rs=\$$1 || rs= 1196 [ -n "$2" ] && devdir="-m "$2"" || devdir= 1197 _me="devfs_set_ruleset" 1198 1199 if [ -z "$rs" ]; then 1200 warn "$_me: you must specify a ruleset number" 1201 return 1 1202 fi 1203 debug "$_me: setting ruleset ($rs) on mount-point (${devdir#-m })" 1204 if ! /sbin/devfs $devdir ruleset $rs; then 1205 warn "$_me: unable to set ruleset $rs to ${devdir#-m }" 1206 return 1 1207 fi 1208 return 0 1209} 1210 1211# devfs_apply_ruleset ruleset [dir] 1212# Apply ruleset number $ruleset to the devfs mountpoint $dir. 1213# The ruleset argument must be a ruleset name as specified 1214# in a devfs.rules(5) file. Returns 0 on success or non-zero 1215# if it could not apply the ruleset. 1216# 1217devfs_apply_ruleset() 1218{ 1219 local devdir rs _me 1220 [ -n "$1" ] && eval rs=\$$1 || rs= 1221 [ -n "$2" ] && devdir="-m "$2"" || devdir= 1222 _me="devfs_apply_ruleset" 1223 1224 if [ -z "$rs" ]; then 1225 warn "$_me: you must specify a ruleset" 1226 return 1 1227 fi 1228 debug "$_me: applying ruleset ($rs) to mount-point (${devdir#-m })" 1229 if ! /sbin/devfs $devdir rule -s $rs applyset; then 1230 warn "$_me: unable to apply ruleset $rs to ${devdir#-m }" 1231 return 1 1232 fi 1233 return 0 1234} 1235 1236# devfs_domount dir [ruleset] 1237# Mount devfs on dir. If ruleset is specified it is set 1238# on the mount-point. It must also be a ruleset name as specified 1239# in a devfs.rules(5) file. Returns 0 on success. 1240# 1241devfs_domount() 1242{ 1243 local devdir rs _me 1244 devdir="$1" 1245 [ -n "$2" ] && rs=$2 || rs= 1246 _me="devfs_domount()" 1247 1248 if [ -z "$devdir" ]; then 1249 warn "$_me: you must specify a mount-point" 1250 return 1 1251 fi 1252 debug "$_me: mount-point is ($devdir), ruleset is ($rs)" 1253 if ! mount -t devfs dev "$devdir"; then 1254 warn "$_me: Unable to mount devfs on $devdir" 1255 return 1 1256 fi 1257 if [ -n "$rs" ]; then 1258 devfs_init_rulesets 1259 devfs_set_ruleset $rs $devdir 1260 devfs -m $devdir rule applyset 1261 fi 1262 return 0 1263} 1264 1265# devfs_mount_jail dir [ruleset] 1266# Mounts a devfs file system appropriate for jails 1267# on the directory dir. If ruleset is specified, the ruleset 1268# it names will be used instead. If present, ruleset must 1269# be the name of a ruleset as defined in a devfs.rules(5) file. 1270# This function returns non-zero if an error occurs. 1271# 1272devfs_mount_jail() 1273{ 1274 local jdev rs _me 1275 jdev="$1" 1276 [ -n "$2" ] && rs=$2 || rs="devfsrules_jail" 1277 _me="devfs_mount_jail" 1278 1279 devfs_init_rulesets 1280 if ! devfs_domount "$jdev" $rs; then 1281 warn "$_me: devfs was not mounted on $jdev" 1282 return 1 1283 fi 1284 return 0 1285} 1286 1287# Provide a function for normalizing the mounting of memory 1288# filesystems. This should allow the rest of the code here to remain 1289# as close as possible between 5-current and 4-stable. 1290# $1 = size 1291# $2 = mount point 1292# $3 = (optional) extra mdmfs flags 1293mount_md() 1294{ 1295 if [ -n "$3" ]; then 1296 flags="$3" 1297 fi 1298 /sbin/mdmfs $flags -s $1 md $2 1299} 1300 1301# ltr str src dst 1302# Change every $src in $str to $dst. 1303# Useful when /usr is not yet mounted and we cannot use tr(1), sed(1) nor 1304# awk(1). 1305ltr() 1306{ 1307 local _str _src _dst _out _com 1308 _str=$1 1309 _src=$2 1310 _dst=$3 1311 _out="" 1312 1313 IFS=${_src} 1314 for _com in ${_str}; do 1315 if [ -z "${_out}" ]; then 1316 _out="${_com}" 1317 else 1318 _out="${_out}${_dst}${_com}" 1319 fi 1320 done 1321 echo "${_out}" 1322} 1323 1324# Creates a list of providers for GELI encryption. 1325geli_make_list() 1326{ 1327 local devices devices2 1328 local provider mountpoint type options rest 1329 1330 # Create list of GELI providers from fstab. 1331 while read provider mountpoint type options rest ; do 1332 case ":${provider}" in 1333 :#*) 1334 continue 1335 ;; 1336 *.eli) 1337 # Skip swap devices. 1338 if [ "${type}" = "swap" -o "${options}" = "sw" ]; then 1339 continue 1340 fi 1341 devices="${devices} ${provider}" 1342 ;; 1343 esac 1344 done < /etc/fstab 1345 1346 # Append providers from geli_devices. 1347 devices="${devices} ${geli_devices}" 1348 1349 for provider in ${devices}; do 1350 provider=${provider%.eli} 1351 provider=${provider#/dev/} 1352 devices2="${devices2} ${provider}" 1353 done 1354 1355 echo ${devices2} 1356} 1357 1358fi 1359