rc.subr revision 146490
1# $NetBSD: rc.subr,v 1.60 2003/07/26 05:13:47 lukem Exp $ 2# $FreeBSD: head/etc/rc.subr 146490 2005-05-22 16:22:23Z schweikh $ 3# 4# Copyright (c) 1997-2002 The NetBSD Foundation, Inc. 5# All rights reserved. 6# 7# This code is derived from software contributed to The NetBSD Foundation 8# by Luke Mewburn. 9# 10# Redistribution and use in source and binary forms, with or without 11# modification, are permitted provided that the following conditions 12# are met: 13# 1. Redistributions of source code must retain the above copyright 14# notice, this list of conditions and the following disclaimer. 15# 2. Redistributions in binary form must reproduce the above copyright 16# notice, this list of conditions and the following disclaimer in the 17# documentation and/or other materials provided with the distribution. 18# 3. All advertising materials mentioning features or use of this software 19# must display the following acknowledgement: 20# This product includes software developed by the NetBSD 21# Foundation, Inc. and its contributors. 22# 4. Neither the name of The NetBSD Foundation nor the names of its 23# contributors may be used to endorse or promote products derived 24# from this software without specific prior written permission. 25# 26# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 27# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 28# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 29# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 30# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 31# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 32# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 33# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 34# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 35# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 36# POSSIBILITY OF SUCH DAMAGE. 37# 38# rc.subr 39# functions used by various rc scripts 40# 41 42# 43# Operating System dependent/independent variables 44# 45 46if [ -z "${_rc_subr_loaded}" ]; then 47 48_rc_subr_loaded="YES" 49 50SYSCTL="/sbin/sysctl" 51SYSCTL_N="${SYSCTL} -n" 52CMD_OSTYPE="${SYSCTL_N} kern.ostype" 53OSTYPE=`${CMD_OSTYPE}` 54ID="/usr/bin/id" 55IDCMD="if [ -x $ID ]; then $ID -un; fi" 56 57case ${OSTYPE} in 58FreeBSD) 59 SYSCTL_W="${SYSCTL}" 60 ;; 61NetBSD) 62 SYSCTL_W="${SYSCTL} -w" 63 ;; 64esac 65 66# 67# functions 68# --------- 69 70# 71# set_rcvar base_var 72# Set the variable name enabling a specific service. 73# FreeBSD uses ${service}_enable, while NetBSD uses 74# just the name of the service. For example: 75# FreeBSD: sendmail_enable="YES" 76# NetBSD : sendmail="YES" 77# $1 - if $name is not the base to work of off, specify 78# a different one 79# 80set_rcvar() 81{ 82 if [ -z "$1" ]; then 83 base_var=${name} 84 else 85 base_var="$1" 86 fi 87 88 case ${OSTYPE} in 89 FreeBSD) 90 echo ${base_var}_enable 91 ;; 92 NetBSD) 93 echo ${base_var} 94 ;; 95 *) 96 echo 'XXX' 97 ;; 98 esac 99} 100 101# 102# force_depend script 103# Force a service to start. Intended for use by services 104# to resolve dependency issues. It is assumed the caller 105# has check to make sure this call is necessary 106# $1 - filename of script, in /etc/rc.d, to run 107# 108force_depend() 109{ 110 _depend="$1" 111 112 info "${name} depends on ${_depend}, which will be forced to start." 113 if ! /etc/rc.d/${_depend} forcestart; then 114 warn "Unable to force ${_depend}. It may already be running." 115 return 1 116 fi 117 return 0 118} 119 120# 121# checkyesno var 122# Test $1 variable, and warn if not set to YES or NO. 123# Return 0 if it's "yes" (et al), nonzero otherwise. 124# 125checkyesno() 126{ 127 eval _value=\$${1} 128 debug "checkyesno: $1 is set to $_value." 129 case $_value in 130 131 # "yes", "true", "on", or "1" 132 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 133 return 0 134 ;; 135 136 # "no", "false", "off", or "0" 137 [Nn][Oo]|[Ff][Aa][Ll][Ss][Ee]|[Oo][Ff][Ff]|0) 138 return 1 139 ;; 140 *) 141 warn "\$${1} is not set properly - see rc.conf(5)." 142 return 1 143 ;; 144 esac 145} 146 147# reverse_list list 148# print the list in reverse order 149# 150reverse_list() 151{ 152 _revlist= 153 for _revfile; do 154 _revlist="$_revfile $_revlist" 155 done 156 echo $_revlist 157} 158 159# 160# mount_critical_filesystems type 161# Go through the list of critical filesystems as provided in 162# the rc.conf(5) variable $critical_filesystems_${type}, checking 163# each one to see if it is mounted, and if it is not, mounting it. 164# 165mount_critical_filesystems() 166{ 167 eval _fslist=\$critical_filesystems_${1} 168 for _fs in $_fslist; do 169 mount | ( 170 _ismounted=false 171 while read what _on on _type type; do 172 if [ $on = $_fs ]; then 173 _ismounted=true 174 fi 175 done 176 if $_ismounted; then 177 : 178 else 179 mount $_fs >/dev/null 2>&1 180 fi 181 ) 182 done 183} 184 185# 186# check_pidfile pidfile procname [interpreter] 187# Parses the first line of pidfile for a PID, and ensures 188# that the process is running and matches procname. 189# Prints the matching PID upon success, nothing otherwise. 190# interpreter is optional; see _find_processes() for details. 191# 192check_pidfile() 193{ 194 _pidfile=$1 195 _procname=$2 196 _interpreter=$3 197 if [ -z "$_pidfile" -o -z "$_procname" ]; then 198 err 3 'USAGE: check_pidfile pidfile procname [interpreter]' 199 fi 200 if [ ! -f $_pidfile ]; then 201 debug "pid file ($_pidfile): not readable." 202 return 203 fi 204 read _pid _junk < $_pidfile 205 if [ -z "$_pid" ]; then 206 debug "pid file ($_pidfile): no pid in file." 207 return 208 fi 209 _find_processes $_procname ${_interpreter:-.} '-p '"$_pid" 210} 211 212# 213# check_process procname [interpreter] 214# Ensures that a process (or processes) named procname is running. 215# Prints a list of matching PIDs. 216# interpreter is optional; see _find_processes() for details. 217# 218check_process() 219{ 220 _procname=$1 221 _interpreter=$2 222 if [ -z "$_procname" ]; then 223 err 3 'USAGE: check_process procname [interpreter]' 224 fi 225 _find_processes $_procname ${_interpreter:-.} '-ax' 226} 227 228# 229# _find_processes procname interpreter psargs 230# Search for procname in the output of ps generated by psargs. 231# Prints the PIDs of any matching processes, space separated. 232# 233# If interpreter == ".", check the following variations of procname 234# against the first word of each command: 235# procname 236# `basename procname` 237# `basename procname` + ":" 238# "(" + `basename procname` + ")" 239# 240# If interpreter != ".", read the first line of procname, remove the 241# leading #!, normalise whitespace, append procname, and attempt to 242# match that against each command, either as is, or with extra words 243# at the end. 244# 245_find_processes() 246{ 247 if [ $# -ne 3 ]; then 248 err 3 'USAGE: _find_processes procname interpreter psargs' 249 fi 250 _procname=$1 251 _interpreter=$2 252 _psargs=$3 253 254 _pref= 255 if [ $_interpreter != "." ]; then # an interpreted script 256 read _interp < $_procname # read interpreter name 257 _interp=${_interp#\#!} # strip #! 258 set -- $_interp 259 if [ $_interpreter != $1 ]; then 260 warn "\$command_interpreter $_interpreter != $1" 261 fi 262 _interp="$* $_procname" # cleanup spaces, add _procname 263 _fp_args='_argv' 264 _fp_match='case "$_argv" in 265 ${_interp}|"${_interp} "*)' 266 else # a normal daemon 267 _procnamebn=${_procname##*/} 268 _fp_args='_arg0 _argv' 269 _fp_match='case "$_arg0" in 270 $_procname|$_procnamebn|${_procnamebn}:|"(${_procnamebn})")' 271 fi 272 273 _proccheck=' 274 ps 2>/dev/null -o "pid,command" '"$_psargs"' | 275 while read _npid '"$_fp_args"'; do 276 case "$_npid" in 277 PID) 278 continue;; 279 esac; '"$_fp_match"' 280 echo -n "$_pref$_npid"; 281 _pref=" " 282 ;; 283 esac 284 done' 285 286# debug "in _find_processes: proccheck is ($_proccheck)." 287 eval $_proccheck 288} 289 290# 291# wait_for_pids pid [pid ...] 292# spins until none of the pids exist 293# 294wait_for_pids() 295{ 296 _list="$@" 297 if [ -z "$_list" ]; then 298 return 299 fi 300 _prefix= 301 while true; do 302 _nlist=""; 303 for _j in $_list; do 304 if kill -0 $_j 2>/dev/null; then 305 _nlist="${_nlist}${_nlist:+ }$_j" 306 fi 307 done 308 if [ -z "$_nlist" ]; then 309 break 310 fi 311 _list=$_nlist 312 echo -n ${_prefix:-"Waiting for PIDS: "}$_list 313 _prefix=", " 314 sleep 2 315 done 316 if [ -n "$_prefix" ]; then 317 echo "." 318 fi 319} 320 321# 322# run_rc_command argument 323# Search for argument in the list of supported commands, which is: 324# "start stop restart rcvar status poll ${extra_commands}" 325# If there's a match, run ${argument}_cmd or the default method 326# (see below). 327# 328# If argument has a given prefix, then change the operation as follows: 329# Prefix Operation 330# ------ --------- 331# fast Skip the pid check, and set rc_fast=yes 332# force Set ${rcvar} to YES, and set rc_force=yes 333# one Set ${rcvar} to YES 334# 335# The following globals are used: 336# 337# Name Needed Purpose 338# ---- ------ ------- 339# name y Name of script. 340# 341# command n Full path to command. 342# Not needed if ${rc_arg}_cmd is set for 343# each keyword. 344# 345# command_args n Optional args/shell directives for command. 346# 347# command_interpreter n If not empty, command is interpreted, so 348# call check_{pidfile,process}() appropriately. 349# 350# extra_commands n List of extra commands supported. 351# 352# pidfile n If set, use check_pidfile $pidfile $command, 353# otherwise use check_process $command. 354# In either case, only check if $command is set. 355# 356# procname n Process name to check for instead of $command. 357# 358# rcvar n This is checked with checkyesno to determine 359# if the action should be run. 360# 361# ${name}_chroot n Directory to chroot to before running ${command} 362# Requires /usr to be mounted. 363# 364# ${name}_chdir n Directory to cd to before running ${command} 365# (if not using ${name}_chroot). 366# 367# ${name}_flags n Arguments to call ${command} with. 368# NOTE: $flags from the parent environment 369# can be used to override this. 370# 371# ${name}_nice n Nice level to run ${command} at. 372# 373# ${name}_user n User to run ${command} as, using su(1) if not 374# using ${name}_chroot. 375# Requires /usr to be mounted. 376# 377# ${name}_group n Group to run chrooted ${command} as. 378# Requires /usr to be mounted. 379# 380# ${name}_groups n Comma separated list of supplementary groups 381# to run the chrooted ${command} with. 382# Requires /usr to be mounted. 383# 384# ${rc_arg}_cmd n If set, use this as the method when invoked; 385# Otherwise, use default command (see below) 386# 387# ${rc_arg}_precmd n If set, run just before performing the 388# ${rc_arg}_cmd method in the default 389# operation (i.e, after checking for required 390# bits and process (non)existence). 391# If this completes with a non-zero exit code, 392# don't run ${rc_arg}_cmd. 393# 394# ${rc_arg}_postcmd n If set, run just after performing the 395# ${rc_arg}_cmd method, if that method 396# returned a zero exit code. 397# 398# required_dirs n If set, check for the existence of the given 399# directories before running the default 400# (re)start command. 401# 402# required_files n If set, check for the readability of the given 403# files before running the default (re)start 404# command. 405# 406# required_vars n If set, perform checkyesno on each of the 407# listed variables before running the default 408# (re)start command. 409# 410# Default behaviour for a given argument, if no override method is 411# provided: 412# 413# Argument Default behaviour 414# -------- ----------------- 415# start if !running && checkyesno ${rcvar} 416# ${command} 417# 418# stop if ${pidfile} 419# rc_pid=$(check_pidfile $pidfile $command) 420# else 421# rc_pid=$(check_process $command) 422# kill $sig_stop $rc_pid 423# wait_for_pids $rc_pid 424# ($sig_stop defaults to TERM.) 425# 426# reload Similar to stop, except use $sig_reload instead, 427# and doesn't wait_for_pids. 428# $sig_reload defaults to HUP. 429# 430# restart Run `stop' then `start'. 431# 432# status Show if ${command} is running, etc. 433# 434# poll Wait for ${command} to exit. 435# 436# rcvar Display what rc.conf variable is used (if any). 437# 438# Variables available to methods, and after run_rc_command() has 439# completed: 440# 441# Variable Purpose 442# -------- ------- 443# rc_arg Argument to command, after fast/force/one processing 444# performed 445# 446# rc_flags Flags to start the default command with. 447# Defaults to ${name}_flags, unless overridden 448# by $flags from the environment. 449# This variable may be changed by the precmd method. 450# 451# rc_pid PID of command (if appropriate) 452# 453# rc_fast Not empty if "fast" was provided (q.v.) 454# 455# rc_force Not empty if "force" was provided (q.v.) 456# 457# 458run_rc_command() 459{ 460 _return=0 461 rc_arg=$1 462 if [ -z "$name" ]; then 463 err 3 'run_rc_command: $name is not set.' 464 fi 465 466 # Don't repeat the first argument when passing additional command- 467 # line arguments to the command subroutines. 468 # 469 shift 1 470 rc_extra_args="$*" 471 472 _rc_prefix= 473 case "$rc_arg" in 474 fast*) # "fast" prefix; don't check pid 475 rc_arg=${rc_arg#fast} 476 rc_fast=yes 477 ;; 478 force*) # "force prefix; always run 479 rc_force=yes 480 _rc_prefix=force 481 rc_arg=${rc_arg#${_rc_prefix}} 482 if [ -n "${rcvar}" ]; then 483 eval ${rcvar}=YES 484 fi 485 ;; 486 one*) # "one" prefix; set ${rcvar}=yes 487 _rc_prefix=one 488 rc_arg=${rc_arg#${_rc_prefix}} 489 if [ -n "${rcvar}" ]; then 490 eval ${rcvar}=YES 491 fi 492 ;; 493 esac 494 495 eval _overide_command=\$${name}_program 496 if [ -n "$_overide_command" ]; then 497 command=$_overide_command 498 fi 499 500 _keywords="start stop restart rcvar $extra_commands" 501 rc_pid= 502 _pidcmd= 503 _procname=${procname:-${command}} 504 505 # setup pid check command 506 if [ -n "$_procname" ]; then 507 if [ -n "$pidfile" ]; then 508 _pidcmd='rc_pid=$(check_pidfile '"$pidfile $_procname $command_interpreter"')' 509 else 510 _pidcmd='rc_pid=$(check_process '"$_procname $command_interpreter"')' 511 fi 512 if [ -n "$_pidcmd" ]; then 513 _keywords="${_keywords} status poll" 514 fi 515 fi 516 517 if [ -z "$rc_arg" ]; then 518 rc_usage "$_keywords" 519 fi 520 521 if [ -n "$flags" ]; then # allow override from environment 522 rc_flags=$flags 523 else 524 eval rc_flags=\$${name}_flags 525 fi 526 eval _chdir=\$${name}_chdir _chroot=\$${name}_chroot \ 527 _nice=\$${name}_nice _user=\$${name}_user \ 528 _group=\$${name}_group _groups=\$${name}_groups 529 530 if [ -n "$_user" ]; then # unset $_user if running as that user 531 if [ "$_user" = "$(eval $IDCMD)" ]; then 532 unset _user 533 fi 534 fi 535 536 # if ${rcvar} is set, and $1 is not 537 # "rcvar", then run 538 # checkyesno ${rcvar} 539 # and return if that failed 540 # 541 if [ -n "${rcvar}" -a "$rc_arg" != "rcvar" ]; then 542 if ! checkyesno ${rcvar}; then 543 return 0 544 fi 545 fi 546 547 eval $_pidcmd # determine the pid if necessary 548 549 for _elem in $_keywords; do 550 if [ "$_elem" != "$rc_arg" ]; then 551 continue 552 fi 553 554 # if there's a custom ${XXX_cmd}, 555 # run that instead of the default 556 # 557 eval _cmd=\$${rc_arg}_cmd _precmd=\$${rc_arg}_precmd \ 558 _postcmd=\$${rc_arg}_postcmd 559 if [ -n "$_cmd" ]; then 560 # if the precmd failed and force 561 # isn't set, exit 562 # 563 if [ -n "$_precmd" ]; then 564 debug "run_rc_command: evaluating ${_precmd}()." 565 eval $_precmd $rc_extra_args 566 _return=$? 567 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 568 return 1 569 fi 570 571 if [ -n "$_cmd" ]; then 572 debug "run_rc_command: evaluating ${_cmd}()." 573 eval $_cmd $rc_extra_args 574 _return=$? 575 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 576 return 1 577 fi 578 579 if [ -n "$_postcmd" ]; then 580 debug "run_rc_command: evaluating ${_postcmd}()." 581 eval $_postcmd $rc_extra_args 582 _return=$? 583 fi 584 return $_return 585 fi 586 587 case "$rc_arg" in # default operations... 588 589 status) 590 if [ -n "$rc_pid" ]; then 591 echo "${name} is running as pid $rc_pid." 592 else 593 echo "${name} is not running." 594 return 1 595 fi 596 ;; 597 598 start) 599 if [ -z "$rc_fast" -a -n "$rc_pid" ]; then 600 echo "${name} already running? (pid=$rc_pid)." 601 exit 1 602 fi 603 604 if [ ! -x ${_chroot}${command} ]; then 605 info "run_rc_command: cannot run ($command)." 606 return 0 607 fi 608 609 # check for required variables, 610 # directories, and files 611 # 612 for _f in $required_vars; do 613 if ! checkyesno $_f; then 614 warn "\$${_f} is not set." 615 if [ -z "$rc_force" ]; then 616 return 1 617 fi 618 fi 619 done 620 for _f in $required_dirs; do 621 if [ ! -d "${_f}/." ]; then 622 warn "${_f} is not a directory." 623 if [ -z "$rc_force" ]; then 624 return 1 625 fi 626 fi 627 done 628 for _f in $required_files; do 629 if [ ! -r "${_f}" ]; then 630 warn "${_f} is not readable." 631 if [ -z "$rc_force" ]; then 632 return 1 633 fi 634 fi 635 done 636 637 # if the precmd failed and force 638 # isn't set, exit 639 # 640 if [ -n "${_precmd}" ]; then 641 debug "run_rc_command: evaluating ${_precmd}()." 642 eval $_precmd 643 _return=$? 644 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 645 return 1 646 fi 647 648 # setup the command to run, and run it 649 # 650 echo "Starting ${name}." 651 if [ -n "$_chroot" ]; then 652 _doit="\ 653${_nice:+nice -n $_nice }\ 654chroot ${_user:+-u $_user }${_group:+-g $_group }${_groups:+-G $_groups }\ 655$_chroot $command $rc_flags $command_args" 656 else 657 _doit="\ 658${_chdir:+cd $_chdir; }\ 659${_nice:+nice -n $_nice }\ 660$command $rc_flags $command_args" 661 if [ -n "$_user" ]; then 662 _doit="su -m $_user -c 'sh -c \"$_doit\"'" 663 fi 664 fi 665 666 # if the cmd failed and force 667 # isn't set, exit 668 # 669 debug "run_rc_command: _doit: $_doit" 670 eval $_doit 671 _return=$? 672 [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 673 674 # finally, run postcmd 675 # 676 if [ -n "${_postcmd}" ]; then 677 debug "run_rc_command: evaluating ${_postcmd}()." 678 eval $_postcmd 679 fi 680 ;; 681 682 stop) 683 if [ -z "$rc_pid" ]; then 684 [ -n "$rc_fast" ] && exit 0 685 if [ -n "$pidfile" ]; then 686 echo \ 687 "${name} not running? (check $pidfile)." 688 else 689 echo "${name} not running?" 690 fi 691 exit 1 692 fi 693 694 # if the precmd failed and force 695 # isn't set, exit 696 # 697 if [ -n "$_precmd" ]; then 698 eval $_precmd 699 _return=$? 700 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 701 return 1 702 fi 703 704 # send the signal to stop 705 # 706 echo "Stopping ${name}." 707 _doit="kill -${sig_stop:-TERM} $rc_pid" 708 if [ -n "$_user" ]; then 709 _doit="su -m $_user -c 'sh -c \"$_doit\"'" 710 fi 711 712 # if the stop cmd failed and force 713 # isn't set, exit 714 # 715 eval $_doit 716 _return=$? 717 [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 718 719 # wait for the command to exit, 720 # and run postcmd. 721 wait_for_pids $rc_pid 722 if [ -n "$_postcmd" ]; then 723 eval $_postcmd 724 _return=$? 725 fi 726 ;; 727 728 reload) 729 if [ -z "$rc_pid" ]; then 730 if [ -n "$pidfile" ]; then 731 echo \ 732 "${name} not running? (check $pidfile)." 733 else 734 echo "${name} not running?" 735 fi 736 exit 1 737 fi 738 echo "Reloading ${name} config files." 739 if [ -n "$_precmd" ]; then 740 eval $_precmd 741 _return=$? 742 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 743 return 1 744 fi 745 _doit="kill -${sig_reload:-HUP} $rc_pid" 746 if [ -n "$_user" ]; then 747 _doit="su -m $_user -c 'sh -c \"$_doit\"'" 748 fi 749 eval $_doit 750 _return=$? 751 [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 752 if [ -n "$_postcmd" ]; then 753 eval $_postcmd 754 _return=$? 755 fi 756 ;; 757 758 restart) 759 if [ -n "$_precmd" ]; then 760 eval $_precmd $rc_extra_args 761 _return=$? 762 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 763 return 1 764 fi 765 # prevent restart being called more 766 # than once by any given script 767 # 768 if ${_rc_restart_done:-false}; then 769 return 0 770 fi 771 _rc_restart_done=true 772 773 ( $0 ${_rc_prefix}stop $rc_extra_args ) 774 $0 ${_rc_prefix}start $rc_extra_args 775 776 if [ -n "$_postcmd" ]; then 777 eval $_postcmd $rc_extra_args 778 _return=$? 779 fi 780 ;; 781 782 poll) 783 if [ -n "$rc_pid" ]; then 784 wait_for_pids $rc_pid 785 fi 786 ;; 787 788 rcvar) 789 echo "# $name" 790 if [ -n "$rcvar" ]; then 791 if checkyesno ${rcvar}; then 792 echo "\$${rcvar}=YES" 793 else 794 echo "\$${rcvar}=NO" 795 fi 796 fi 797 ;; 798 799 *) 800 rc_usage "$_keywords" 801 ;; 802 803 esac 804 return $_return 805 done 806 807 echo 1>&2 "$0: unknown directive '$rc_arg'." 808 rc_usage "$_keywords" 809 exit 1 810} 811 812# 813# run_rc_script file arg 814# Start the script `file' with `arg', and correctly handle the 815# return value from the script. If `file' ends with `.sh', it's 816# sourced into the current environment. If `file' appears to be 817# a backup or scratch file, ignore it. Otherwise if it's 818# executable run as a child process. 819# 820run_rc_script() 821{ 822 _file=$1 823 _arg=$2 824 if [ -z "$_file" -o -z "$_arg" ]; then 825 err 3 'USAGE: run_rc_script file arg' 826 fi 827 828 unset name command command_args command_interpreter \ 829 extra_commands pidfile procname \ 830 rcvar required_dirs required_files required_vars 831 eval unset ${_arg}_cmd ${_arg}_precmd ${_arg}_postcmd 832 833 case "$_file" in 834 *.sh) # run in current shell 835 set $_arg; . $_file 836 ;; 837 *[~#]|*.OLD|*.orig|*,v) # scratch file; skip 838 warn "Ignoring scratch file $_file" 839 ;; 840 *) # run in subshell 841 if [ -x $_file ]; then 842 if [ -n "$rc_fast_and_loose" ]; then 843 set $_arg; . $_file 844 else 845 ( trap "echo Script $_file interrupted; kill -QUIT $$" 3 846 trap "echo Script $_file interrupted; exit 1" 2 847 set $_arg; . $_file ) 848 fi 849 fi 850 ;; 851 esac 852} 853 854# 855# load_rc_config 856# Source in the configuration file for a given command. 857# 858load_rc_config() 859{ 860 _command=$1 861 if [ -z "$_command" ]; then 862 err 3 'USAGE: load_rc_config command' 863 fi 864 865 if ${_rc_conf_loaded:-false}; then 866 : 867 else 868 if [ -r /etc/defaults/rc.conf ]; then 869 debug "Sourcing /etc/defaults/rc.conf" 870 . /etc/defaults/rc.conf 871 source_rc_confs 872 elif [ -r /etc/rc.conf ]; then 873 debug "Sourcing /etc/rc.conf (/etc/defaults/rc.conf doesn't exist)." 874 . /etc/rc.conf 875 fi 876 _rc_conf_loaded=true 877 fi 878 if [ -f /etc/rc.conf.d/"$_command" ]; then 879 debug "Sourcing /etc/rc.conf.d/${_command}" 880 . /etc/rc.conf.d/"$_command" 881 fi 882 883 # XXX - Deprecated variable name support 884 # 885 case ${OSTYPE} in 886 FreeBSD) 887 [ -n "$portmap_enable" ] && rpcbind_enable="$portmap_enable" 888 [ -n "$portmap_program" ] && rpcbind_program="$portmap_program" 889 [ -n "$portmap_flags" ] && rpcbind_flags="$portmap_flags" 890 [ -n "$single_mountd_enable" ] && mountd_enable="$single_mountd_enable" 891 [ -n "$xntpd_enable" ] && ntpd_enable="$xntpd_enable" 892 [ -n "$xntpd_program" ] && ntpd_program="$xntpd_program" 893 [ -n "$xntpd_flags" ] && ntpd_flags="$xntpd_flags" 894 [ -n "$dhcp_program" ] && dhclient_program="$dhcp_program" 895 [ -n "$dhcp_flags" ] && dhclient_flags="$dhcp_flags" 896 ;; 897 esac 898} 899 900# 901# rc_usage commands 902# Print a usage string for $0, with `commands' being a list of 903# valid commands. 904# 905rc_usage() 906{ 907 echo -n 1>&2 "Usage: $0 [fast|force|one](" 908 909 _sep= 910 for _elem; do 911 echo -n 1>&2 "$_sep$_elem" 912 _sep="|" 913 done 914 echo 1>&2 ")" 915 exit 1 916} 917 918# 919# err exitval message 920# Display message to stderr and log to the syslog, and exit with exitval. 921# 922err() 923{ 924 exitval=$1 925 shift 926 927 if [ -x /usr/bin/logger ]; then 928 logger "$0: ERROR: $*" 929 fi 930 echo 1>&2 "$0: ERROR: $*" 931 exit $exitval 932} 933 934# 935# warn message 936# Display message to stderr and log to the syslog. 937# 938warn() 939{ 940 if [ -x /usr/bin/logger ]; then 941 logger "$0: WARNING: $*" 942 fi 943 echo 1>&2 "$0: WARNING: $*" 944} 945 946# 947# info message 948# Display informational message to stdout and log to syslog. 949# 950info() 951{ 952 case ${rc_info} in 953 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 954 if [ -x /usr/bin/logger ]; then 955 logger "$0: INFO: $*" 956 fi 957 echo "$0: INFO: $*" 958 ;; 959 esac 960} 961 962# 963# debug message 964# If debugging is enabled in rc.conf output message to stderr. 965# BEWARE that you don't call any subroutine that itself calls this 966# function. 967# 968debug() 969{ 970 case ${rc_debug} in 971 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 972 if [ -x /usr/bin/logger ]; then 973 logger "$0: INFO: $*" 974 fi 975 echo 1>&2 "$0: DEBUG: $*" 976 ;; 977 esac 978} 979 980# 981# backup_file action file cur backup 982# Make a backup copy of `file' into `cur', and save the previous 983# version of `cur' as `backup' or use rcs for archiving. 984# 985# This routine checks the value of the backup_uses_rcs variable, 986# which can be either YES or NO. 987# 988# The `action' keyword can be one of the following: 989# 990# add `file' is now being backed up (and is possibly 991# being reentered into the backups system). `cur' 992# is created and RCS files, if necessary, are 993# created as well. 994# 995# update `file' has changed and needs to be backed up. 996# If `cur' exists, it is copied to to `back' or 997# checked into RCS (if the repository file is old), 998# and then `file' is copied to `cur'. Another RCS 999# check in done here if RCS is being used. 1000# 1001# remove `file' is no longer being tracked by the backups 1002# system. If RCS is not being used, `cur' is moved 1003# to `back', otherwise an empty file is checked in, 1004# and then `cur' is removed. 1005# 1006# 1007backup_file() 1008{ 1009 _action=$1 1010 _file=$2 1011 _cur=$3 1012 _back=$4 1013 1014 if checkyesno backup_uses_rcs; then 1015 _msg0="backup archive" 1016 _msg1="update" 1017 1018 # ensure that history file is not locked 1019 if [ -f $_cur,v ]; then 1020 rcs -q -u -U -M $_cur 1021 fi 1022 1023 # ensure after switching to rcs that the 1024 # current backup is not lost 1025 if [ -f $_cur ]; then 1026 # no archive, or current newer than archive 1027 if [ ! -f $_cur,v -o $_cur -nt $_cur,v ]; then 1028 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur 1029 rcs -q -kb -U $_cur 1030 co -q -f -u $_cur 1031 fi 1032 fi 1033 1034 case $_action in 1035 add|update) 1036 cp -p $_file $_cur 1037 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur 1038 rcs -q -kb -U $_cur 1039 co -q -f -u $_cur 1040 chown root:wheel $_cur $_cur,v 1041 ;; 1042 remove) 1043 cp /dev/null $_cur 1044 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur 1045 rcs -q -kb -U $_cur 1046 chown root:wheel $_cur $_cur,v 1047 rm $_cur 1048 ;; 1049 esac 1050 else 1051 case $_action in 1052 add|update) 1053 if [ -f $_cur ]; then 1054 cp -p $_cur $_back 1055 fi 1056 cp -p $_file $_cur 1057 chown root:wheel $_cur 1058 ;; 1059 remove) 1060 mv -f $_cur $_back 1061 ;; 1062 esac 1063 fi 1064} 1065 1066# make_symlink src link 1067# Make a symbolic link 'link' to src from basedir. If the 1068# directory in which link is to be created does not exist 1069# a warning will be displayed and an error will be returned. 1070# Returns 0 on sucess, 1 otherwise. 1071# 1072make_symlink() 1073{ 1074 local src link linkdir _me 1075 src="$1" 1076 link="$2" 1077 linkdir="`dirname $link`" 1078 _me="make_symlink()" 1079 1080 if [ -z "$src" -o -z "$link" ]; then 1081 warn "$_me: requires two arguments." 1082 return 1 1083 fi 1084 if [ ! -d "$linkdir" ]; then 1085 warn "$_me: the directory $linkdir does not exist" 1086 return 1 1087 fi 1088 if ! ln -sf $src $link; then 1089 warn "$_me: unable to make a symbolic link from $link to $src" 1090 return 1 1091 fi 1092 return 0 1093} 1094 1095# devfs_rulesets_from_file file 1096# Reads a set of devfs commands from file, and creates 1097# the specified rulesets with their rules. Returns non-zero 1098# if there was an error. 1099# 1100devfs_rulesets_from_file() 1101{ 1102 local file _err _me 1103 file="$1" 1104 _me="devfs_rulesets_from_file" 1105 _err=0 1106 1107 if [ -z "$file" ]; then 1108 warn "$_me: you must specify a file" 1109 return 1 1110 fi 1111 if [ ! -e "$file" ]; then 1112 debug "$_me: no such file ($file)" 1113 return 0 1114 fi 1115 debug "reading rulesets from file ($file)" 1116 { while read line 1117 do 1118 case $line in 1119 \#*) 1120 continue 1121 ;; 1122 \[*\]*) 1123 rulenum=`expr "$line" : "\[.*=\([0-9]*\)\]"` 1124 if [ -z "$rulenum" ]; then 1125 warn "$_me: cannot extract rule number ($line)" 1126 _err=1 1127 break 1128 fi 1129 rulename=`expr "$line" : "\[\(.*\)=[0-9]*\]"` 1130 if [ -z "$rulename" ]; then 1131 warn "$_me: cannot extract rule name ($line)" 1132 _err=1 1133 break; 1134 fi 1135 eval $rulename=\$rulenum 1136 debug "found ruleset: $rulename=$rulenum" 1137 if ! /sbin/devfs rule -s $rulenum delset; then 1138 _err=1 1139 break 1140 fi 1141 ;; 1142 *) 1143 rulecmd="${line%%"\#*"}" 1144 # evaluate the command incase it includes 1145 # other rules 1146 if [ -n "$rulecmd" ]; then 1147 debug "adding rule ($rulecmd)" 1148 if ! eval /sbin/devfs rule -s $rulenum $rulecmd 1149 then 1150 _err=1 1151 break 1152 fi 1153 fi 1154 ;; 1155 esac 1156 if [ $_err -ne 0 ]; then 1157 debug "error in $_me" 1158 break 1159 fi 1160 done } < $file 1161 return $_err 1162} 1163 1164# devfs_init_rulesets 1165# Initializes rulesets from configuration files. Returns 1166# non-zero if there was an error. 1167# 1168devfs_init_rulesets() 1169{ 1170 local file _me 1171 _me="devfs_init_rulesets" 1172 1173 # Go through this only once 1174 if [ -n "$devfs_rulesets_init" ]; then 1175 debug "$_me: devfs rulesets already initialized" 1176 return 1177 fi 1178 for file in $devfs_rulesets; do 1179 devfs_rulesets_from_file $file || return 1 1180 done 1181 devfs_rulesets_init=1 1182 debug "$_me: devfs rulesets initialized" 1183 return 0 1184} 1185 1186# devfs_set_ruleset ruleset [dir] 1187# Sets the default ruleset of dir to ruleset. The ruleset arguement 1188# must be a ruleset name as specified in devfs.rules(5) file. 1189# Returns non-zero if it could not set it successfully. 1190# 1191devfs_set_ruleset() 1192{ 1193 local devdir rs _me 1194 [ -n "$1" ] && eval rs=\$$1 || rs= 1195 [ -n "$2" ] && devdir="-m "$2"" || devdir= 1196 _me="devfs_set_ruleset" 1197 1198 if [ -z "$rs" ]; then 1199 warn "$_me: you must specify a ruleset number" 1200 return 1 1201 fi 1202 debug "$_me: setting ruleset ($rs) on mount-point (${devdir#-m })" 1203 if ! /sbin/devfs $devdir ruleset $rs; then 1204 warn "$_me: unable to set ruleset $rs to ${devdir#-m }" 1205 return 1 1206 fi 1207 return 0 1208} 1209 1210# devfs_apply_ruleset ruleset [dir] 1211# Apply ruleset number $ruleset to the devfs mountpoint $dir. 1212# The ruleset argument must be a ruleset name as specified 1213# in a devfs.rules(5) file. Returns 0 on success or non-zero 1214# if it could not apply the ruleset. 1215# 1216devfs_apply_ruleset() 1217{ 1218 local devdir rs _me 1219 [ -n "$1" ] && eval rs=\$$1 || rs= 1220 [ -n "$2" ] && devdir="-m "$2"" || devdir= 1221 _me="devfs_apply_ruleset" 1222 1223 if [ -z "$rs" ]; then 1224 warn "$_me: you must specify a ruleset" 1225 return 1 1226 fi 1227 debug "$_me: applying ruleset ($rs) to mount-point (${devdir#-m })" 1228 if ! /sbin/devfs $devdir rule -s $rs applyset; then 1229 warn "$_me: unable to apply ruleset $rs to ${devdir#-m }" 1230 return 1 1231 fi 1232 return 0 1233} 1234 1235# devfs_domount dir [ruleset] 1236# Mount devfs on dir. If ruleset is specified it is set 1237# on the mount-point. It must also be a ruleset name as specified 1238# in a devfs.rules(5) file. Returns 0 on success. 1239# 1240devfs_domount() 1241{ 1242 local devdir rs _me 1243 devdir="$1" 1244 [ -n "$2" ] && rs=$2 || rs= 1245 _me="devfs_domount()" 1246 1247 if [ -z "$devdir" ]; then 1248 warn "$_me: you must specify a mount-point" 1249 return 1 1250 fi 1251 debug "$_me: mount-point is ($devdir), ruleset is ($rs)" 1252 if ! mount -t devfs dev "$devdir"; then 1253 warn "$_me: Unable to mount devfs on $devdir" 1254 return 1 1255 fi 1256 if [ -n "$rs" ]; then 1257 devfs_init_rulesets 1258 devfs_set_ruleset $rs $devdir 1259 devfs -m $devdir rule applyset 1260 fi 1261 return 0 1262} 1263 1264# devfs_mount_jail dir [ruleset] 1265# Mounts a devfs file system appropriate for jails 1266# on the directory dir. If ruleset is specified, the ruleset 1267# it names will be used instead. If present, ruleset must 1268# be the name of a ruleset as defined in a devfs.rules(5) file. 1269# This function returns non-zero if an error occurs. 1270# 1271devfs_mount_jail() 1272{ 1273 local jdev rs _me 1274 jdev="$1" 1275 [ -n "$2" ] && rs=$2 || rs="devfsrules_jail" 1276 _me="devfs_mount_jail" 1277 1278 devfs_init_rulesets 1279 if ! devfs_domount "$jdev" $rs; then 1280 warn "$_me: devfs was not mounted on $jdev" 1281 return 1 1282 fi 1283 return 0 1284} 1285 1286# Provide a function for normalizing the mounting of memory 1287# filesystems. This should allow the rest of the code here to remain 1288# as close as possible between 5-current and 4-stable. 1289# $1 = size 1290# $2 = mount point 1291# $3 = (optional) extra mdmfs flags 1292mount_md() 1293{ 1294 if [ -n "$3" ]; then 1295 flags="$3" 1296 fi 1297 /sbin/mdmfs $flags -s $1 -M md $2 1298} 1299 1300fi 1301