rc.subr revision 131061
1# $NetBSD: rc.subr,v 1.60 2003/07/26 05:13:47 lukem Exp $ 2# $FreeBSD: head/etc/rc.subr 131061 2004-06-24 16:57:49Z mtm $ 3# 4# Copyright (c) 1997-2002 The NetBSD Foundation, Inc. 5# All rights reserved. 6# 7# This code is derived from software contributed to The NetBSD Foundation 8# by Luke Mewburn. 9# 10# Redistribution and use in source and binary forms, with or without 11# modification, are permitted provided that the following conditions 12# are met: 13# 1. Redistributions of source code must retain the above copyright 14# notice, this list of conditions and the following disclaimer. 15# 2. Redistributions in binary form must reproduce the above copyright 16# notice, this list of conditions and the following disclaimer in the 17# documentation and/or other materials provided with the distribution. 18# 3. All advertising materials mentioning features or use of this software 19# must display the following acknowledgement: 20# This product includes software developed by the NetBSD 21# Foundation, Inc. and its contributors. 22# 4. Neither the name of The NetBSD Foundation nor the names of its 23# contributors may be used to endorse or promote products derived 24# from this software without specific prior written permission. 25# 26# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 27# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 28# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 29# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 30# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 31# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 32# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 33# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 34# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 35# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 36# POSSIBILITY OF SUCH DAMAGE. 37# 38# rc.subr 39# functions used by various rc scripts 40# 41 42# 43# Operating System dependent/independent variables 44# 45 46SYSCTL="/sbin/sysctl" 47SYSCTL_N="${SYSCTL} -n" 48CMD_OSTYPE="${SYSCTL_N} kern.ostype" 49OSTYPE=`${CMD_OSTYPE}` 50ID="/usr/bin/id" 51IDCMD="if [ -x $ID ]; then $ID -un; fi" 52 53case ${OSTYPE} in 54FreeBSD) 55 SYSCTL_W="${SYSCTL}" 56 ;; 57NetBSD) 58 SYSCTL_W="${SYSCTL} -w" 59 ;; 60esac 61 62# 63# functions 64# --------- 65 66# 67# set_rcvar base_var 68# Set the variable name enabling a specific service. 69# FreeBSD uses ${service}_enable, while NetBSD uses 70# just the name of the service. For example: 71# FreeBSD: sendmail_enable="YES" 72# NetBSD : sendmail="YES" 73# $1 - if $name is not the base to work of off, specify 74# a different one 75# 76set_rcvar() 77{ 78 if [ -z "$1" ]; then 79 base_var=${name} 80 else 81 base_var="$1" 82 fi 83 84 case ${OSTYPE} in 85 FreeBSD) 86 echo ${base_var}_enable 87 ;; 88 NetBSD) 89 echo ${base_var} 90 ;; 91 *) 92 echo 'XXX' 93 ;; 94 esac 95} 96 97# 98# force_depend script 99# Force a service to start. Intended for use by services 100# to resolve dependency issues. It is assumed the caller 101# has check to make sure this call is necessary 102# $1 - filename of script, in /etc/rc.d, to run 103# 104force_depend() 105{ 106 _depend="$1" 107 108 info "${name} depends on ${_depend}, which will be forced to start." 109 if ! /etc/rc.d/${_depend} forcestart ; then 110 warn "Unable to force ${_depend}. It may already be running." 111 return 1 112 fi 113 return 0 114} 115 116# 117# checkyesno var 118# Test $1 variable, and warn if not set to YES or NO. 119# Return 0 if it's "yes" (et al), nonzero otherwise. 120# 121checkyesno() 122{ 123 eval _value=\$${1} 124 debug "checkyesno: $1 is set to $_value." 125 case $_value in 126 127 # "yes", "true", "on", or "1" 128 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 129 return 0 130 ;; 131 132 # "no", "false", "off", or "0" 133 [Nn][Oo]|[Ff][Aa][Ll][Ss][Ee]|[Oo][Ff][Ff]|0) 134 return 1 135 ;; 136 *) 137 warn "\$${1} is not set properly - see rc.conf(5)." 138 return 1 139 ;; 140 esac 141} 142 143# reverse_list list 144# print the list in reverse order 145# 146reverse_list() 147{ 148 _revlist= 149 for _revfile; do 150 _revlist="$_revfile $_revlist" 151 done 152 echo $_revlist 153} 154 155# 156# mount_critical_filesystems type 157# Go through the list of critical filesystems as provided in 158# the rc.conf(5) variable $critical_filesystems_${type}, checking 159# each one to see if it is mounted, and if it is not, mounting it. 160# 161mount_critical_filesystems() 162{ 163 eval _fslist=\$critical_filesystems_${1} 164 for _fs in $_fslist; do 165 mount | ( 166 _ismounted=false 167 while read what _on on _type type; do 168 if [ $on = $_fs ]; then 169 _ismounted=true 170 fi 171 done 172 if $_ismounted; then 173 : 174 else 175 mount $_fs >/dev/null 2>&1 176 fi 177 ) 178 done 179} 180 181# 182# check_pidfile pidfile procname [interpreter] 183# Parses the first line of pidfile for a PID, and ensures 184# that the process is running and matches procname. 185# Prints the matching PID upon success, nothing otherwise. 186# interpreter is optional; see _find_processes() for details. 187# 188check_pidfile() 189{ 190 _pidfile=$1 191 _procname=$2 192 _interpreter=$3 193 if [ -z "$_pidfile" -o -z "$_procname" ]; then 194 err 3 'USAGE: check_pidfile pidfile procname [interpreter]' 195 fi 196 if [ ! -f $_pidfile ]; then 197 debug "pid file ($_pidfile): not readable." 198 return 199 fi 200 read _pid _junk < $_pidfile 201 if [ -z "$_pid" ]; then 202 debug "pid file {$_pidfile): no pid in file." 203 return 204 fi 205 _find_processes $_procname ${_interpreter:-.} '-p '"$_pid" 206} 207 208# 209# check_process procname [interpreter] 210# Ensures that a process (or processes) named procname is running. 211# Prints a list of matching PIDs. 212# interpreter is optional; see _find_processes() for details. 213# 214check_process() 215{ 216 _procname=$1 217 _interpreter=$2 218 if [ -z "$_procname" ]; then 219 err 3 'USAGE: check_process procname [interpreter]' 220 fi 221 _find_processes $_procname ${_interpreter:-.} '-ax' 222} 223 224# 225# _find_processes procname interpreter psargs 226# Search for procname in the output of ps generated by psargs. 227# Prints the PIDs of any matching processes, space separated. 228# 229# If interpreter == ".", check the following variations of procname 230# against the first word of each command: 231# procname 232# `basename procname` 233# `basename procname` + ":" 234# "(" + `basename procname` + ")" 235# 236# If interpreter != ".", read the first line of procname, remove the 237# leading #!, normalise whitespace, append procname, and attempt to 238# match that against each command, either as is, or with extra words 239# at the end. 240# 241_find_processes() 242{ 243 if [ $# -ne 3 ]; then 244 err 3 'USAGE: _find_processes procname interpreter psargs' 245 fi 246 _procname=$1 247 _interpreter=$2 248 _psargs=$3 249 250 _pref= 251 if [ $_interpreter != "." ]; then # an interpreted script 252 read _interp < $_procname # read interpreter name 253 _interp=${_interp#\#!} # strip #! 254 set -- $_interp 255 if [ $_interpreter != $1 ]; then 256 warn "\$command_interpreter $_interpreter != $1" 257 fi 258 _interp="$* $_procname" # cleanup spaces, add _procname 259 _fp_args='_argv' 260 _fp_match='case "$_argv" in 261 ${_interp}|"${_interp} "*)' 262 else # a normal daemon 263 _procnamebn=${_procname##*/} 264 _fp_args='_arg0 _argv' 265 _fp_match='case "$_arg0" in 266 $_procname|$_procnamebn|${_procnamebn}:|"(${_procnamebn})")' 267 fi 268 269 _proccheck=' 270 ps 2>/dev/null -o "pid,command" '"$_psargs"' | 271 while read _npid '"$_fp_args"'; do 272 case "$_npid" in 273 PID) 274 continue ;; 275 esac ; '"$_fp_match"' 276 echo -n "$_pref$_npid" ; 277 _pref=" " 278 ;; 279 esac 280 done' 281 282# debug "in _find_processes: proccheck is ($_proccheck)." 283 eval $_proccheck 284} 285 286# 287# wait_for_pids pid [pid ...] 288# spins until none of the pids exist 289# 290wait_for_pids() 291{ 292 _list="$@" 293 if [ -z "$_list" ]; then 294 return 295 fi 296 _prefix= 297 while true; do 298 _nlist=""; 299 for _j in $_list; do 300 if kill -0 $_j 2>/dev/null; then 301 _nlist="${_nlist}${_nlist:+ }$_j" 302 fi 303 done 304 if [ -z "$_nlist" ]; then 305 break 306 fi 307 _list=$_nlist 308 echo -n ${_prefix:-"Waiting for PIDS: "}$_list 309 _prefix=", " 310 sleep 2 311 done 312 if [ -n "$_prefix" ]; then 313 echo "." 314 fi 315} 316 317# 318# run_rc_command argument 319# Search for argument in the list of supported commands, which is: 320# "start stop restart rcvar status poll ${extra_commands}" 321# If there's a match, run ${argument}_cmd or the default method 322# (see below). 323# 324# If argument has a given prefix, then change the operation as follows: 325# Prefix Operation 326# ------ --------- 327# fast Skip the pid check, and set rc_fast=yes 328# force Set ${rcvar} to YES, and set rc_force=yes 329# one Set ${rcvar} to YES 330# 331# The following globals are used: 332# 333# Name Needed Purpose 334# ---- ------ ------- 335# name y Name of script. 336# 337# command n Full path to command. 338# Not needed if ${rc_arg}_cmd is set for 339# each keyword. 340# 341# command_args n Optional args/shell directives for command. 342# 343# command_interpreter n If not empty, command is interpreted, so 344# call check_{pidfile,process}() appropriately. 345# 346# extra_commands n List of extra commands supported. 347# 348# pidfile n If set, use check_pidfile $pidfile $command, 349# otherwise use check_process $command. 350# In either case, only check if $command is set. 351# 352# procname n Process name to check for instead of $command. 353# 354# rcvar n This is checked with checkyesno to determine 355# if the action should be run. 356# 357# ${name}_chroot n Directory to chroot to before running ${command} 358# Requires /usr to be mounted. 359# 360# ${name}_chdir n Directory to cd to before running ${command} 361# (if not using ${name}_chroot). 362# 363# ${name}_flags n Arguments to call ${command} with. 364# NOTE: $flags from the parent environment 365# can be used to override this. 366# 367# ${name}_nice n Nice level to run ${command} at. 368# 369# ${name}_user n User to run ${command} as, using su(1) if not 370# using ${name}_chroot. 371# Requires /usr to be mounted. 372# 373# ${name}_group n Group to run chrooted ${command} as. 374# Requires /usr to be mounted. 375# 376# ${name}_groups n Comma separated list of supplementary groups 377# to run the chrooted ${command} with. 378# Requires /usr to be mounted. 379# 380# ${rc_arg}_cmd n If set, use this as the method when invoked; 381# Otherwise, use default command (see below) 382# 383# ${rc_arg}_precmd n If set, run just before performing the 384# ${rc_arg}_cmd method in the default 385# operation (i.e, after checking for required 386# bits and process (non)existence). 387# If this completes with a non-zero exit code, 388# don't run ${rc_arg}_cmd. 389# 390# ${rc_arg}_postcmd n If set, run just after performing the 391# ${rc_arg}_cmd method, if that method 392# returned a zero exit code. 393# 394# required_dirs n If set, check for the existence of the given 395# directories before running the default 396# (re)start command. 397# 398# required_files n If set, check for the readability of the given 399# files before running the default (re)start 400# command. 401# 402# required_vars n If set, perform checkyesno on each of the 403# listed variables before running the default 404# (re)start command. 405# 406# Default behaviour for a given argument, if no override method is 407# provided: 408# 409# Argument Default behaviour 410# -------- ----------------- 411# start if !running && checkyesno ${rcvar} 412# ${command} 413# 414# stop if ${pidfile} 415# rc_pid=$(check_pidfile $pidfile $command) 416# else 417# rc_pid=$(check_process $command) 418# kill $sig_stop $rc_pid 419# wait_for_pids $rc_pid 420# ($sig_stop defaults to TERM.) 421# 422# reload Similar to stop, except use $sig_reload instead, 423# and doesn't wait_for_pids. 424# $sig_reload defaults to HUP. 425# 426# restart Run `stop' then `start'. 427# 428# status Show if ${command} is running, etc. 429# 430# poll Wait for ${command} to exit. 431# 432# rcvar Display what rc.conf variable is used (if any). 433# 434# Variables available to methods, and after run_rc_command() has 435# completed: 436# 437# Variable Purpose 438# -------- ------- 439# rc_arg Argument to command, after fast/force/one processing 440# performed 441# 442# rc_flags Flags to start the default command with. 443# Defaults to ${name}_flags, unless overridden 444# by $flags from the environment. 445# This variable may be changed by the precmd method. 446# 447# rc_pid PID of command (if appropriate) 448# 449# rc_fast Not empty if "fast" was provided (q.v.) 450# 451# rc_force Not empty if "force" was provided (q.v.) 452# 453# 454run_rc_command() 455{ 456 _return=0 457 rc_arg=$1 458 if [ -z "$name" ]; then 459 err 3 'run_rc_command: $name is not set.' 460 fi 461 462 _rc_prefix= 463 case "$rc_arg" in 464 fast*) # "fast" prefix; don't check pid 465 rc_arg=${rc_arg#fast} 466 rc_fast=yes 467 ;; 468 force*) # "force prefix; always run 469 rc_force=yes 470 _rc_prefix=force 471 rc_arg=${rc_arg#${_rc_prefix}} 472 if [ -n "${rcvar}" ]; then 473 eval ${rcvar}=YES 474 fi 475 ;; 476 one*) # "one" prefix; set ${rcvar}=yes 477 _rc_prefix=one 478 rc_arg=${rc_arg#${_rc_prefix}} 479 if [ -n "${rcvar}" ]; then 480 eval ${rcvar}=YES 481 fi 482 ;; 483 esac 484 485 eval _overide_command=\$${name}_program 486 if [ -n "$_overide_command" ]; then 487 command=$_overide_command 488 fi 489 490 _keywords="start stop restart rcvar $extra_commands" 491 rc_pid= 492 _pidcmd= 493 _procname=${procname:-${command}} 494 495 # setup pid check command if not fast 496 if [ -z "$rc_fast" -a -n "$_procname" ]; then 497 if [ -n "$pidfile" ]; then 498 _pidcmd='rc_pid=$(check_pidfile '"$pidfile $_procname $command_interpreter"')' 499 else 500 _pidcmd='rc_pid=$(check_process '"$_procname $command_interpreter"')' 501 fi 502 if [ -n "$_pidcmd" ]; then 503 _keywords="${_keywords} status poll" 504 fi 505 fi 506 507 if [ -z "$rc_arg" ]; then 508 rc_usage "$_keywords" 509 fi 510 511 if [ -n "$flags" ]; then # allow override from environment 512 rc_flags=$flags 513 else 514 eval rc_flags=\$${name}_flags 515 fi 516 eval _chdir=\$${name}_chdir _chroot=\$${name}_chroot \ 517 _nice=\$${name}_nice _user=\$${name}_user \ 518 _group=\$${name}_group _groups=\$${name}_groups 519 520 if [ -n "$_user" ]; then # unset $_user if running as that user 521 if [ "$_user" = "$(eval $IDCMD)" ]; then 522 unset _user 523 fi 524 fi 525 526 # if ${rcvar} is set, and $1 is not 527 # "rcvar", then run 528 # checkyesno ${rcvar} 529 # and return if that failed 530 # 531 if [ -n "${rcvar}" -a "$rc_arg" != "rcvar" ]; then 532 if ! checkyesno ${rcvar}; then 533 return 0 534 fi 535 fi 536 537 eval $_pidcmd # determine the pid if necessary 538 539 for _elem in $_keywords; do 540 if [ "$_elem" != "$rc_arg" ]; then 541 continue 542 fi 543 544 # if there's a custom ${XXX_cmd}, 545 # run that instead of the default 546 # 547 eval _cmd=\$${rc_arg}_cmd _precmd=\$${rc_arg}_precmd \ 548 _postcmd=\$${rc_arg}_postcmd 549 if [ -n "$_cmd" ]; then 550 # if the precmd failed and force 551 # isn't set, exit 552 # 553 if [ -n "$_precmd" ]; then 554 debug "run_rc_command: evaluating ${_precmd}()." 555 eval $_precmd 556 _return=$? 557 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 558 return 1 559 fi 560 561 if [ -n "$_cmd" ]; then 562 debug "run_rc_command: evaluating ${_cmd}()." 563 eval $_cmd 564 _return=$? 565 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 566 return 1 567 fi 568 569 if [ -n "$_postcmd" ]; then 570 debug "run_rc_command: evaluating ${_postcmd}()." 571 eval $_postcmd 572 _return=$? 573 fi 574 return $_return 575 fi 576 577 case "$rc_arg" in # default operations... 578 579 status) 580 if [ -n "$rc_pid" ]; then 581 echo "${name} is running as pid $rc_pid." 582 else 583 echo "${name} is not running." 584 return 1 585 fi 586 ;; 587 588 start) 589 if [ -n "$rc_pid" ]; then 590 echo "${name} already running? (pid=$rc_pid)." 591 exit 1 592 fi 593 594 if [ ! -x ${_chroot}${command} ]; then 595 info "run_rc_command: cannot run ($command)." 596 return 0 597 fi 598 599 # check for required variables, 600 # directories, and files 601 # 602 for _f in $required_vars; do 603 if ! checkyesno $_f; then 604 warn "\$${_f} is not set." 605 if [ -z "$rc_force" ]; then 606 return 1 607 fi 608 fi 609 done 610 for _f in $required_dirs; do 611 if [ ! -d "${_f}/." ]; then 612 warn "${_f} is not a directory." 613 if [ -z "$rc_force" ]; then 614 return 1 615 fi 616 fi 617 done 618 for _f in $required_files; do 619 if [ ! -r "${_f}" ]; then 620 warn "${_f} is not readable." 621 if [ -z "$rc_force" ]; then 622 return 1 623 fi 624 fi 625 done 626 627 # if the precmd failed and force 628 # isn't set, exit 629 # 630 if [ -n "${_precmd}" ]; then 631 debug "run_rc_command: evaluating ${_precmd}()." 632 eval $_precmd 633 _return=$? 634 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 635 return 1 636 fi 637 638 # setup the command to run, and run it 639 # 640 echo "Starting ${name}." 641 if [ -n "$_chroot" ]; then 642 _doit="\ 643${_nice:+nice -n $_nice }\ 644chroot ${_user:+-u $_user }${_group:+-g $_group }${_groups:+-G $_groups }\ 645$_chroot $command $rc_flags $command_args" 646 else 647 _doit="\ 648${_chdir:+cd $_chdir; }\ 649${_nice:+nice -n $_nice }\ 650$command $rc_flags $command_args" 651 if [ -n "$_user" ]; then 652 _doit="su -m $_user -c 'sh -c \"$_doit\"'" 653 fi 654 fi 655 656 # if the cmd failed and force 657 # isn't set, exit 658 # 659 debug "run_rc_command: _doit: $_doit" 660 eval $_doit 661 _return=$? 662 [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 663 664 # finally, run postcmd 665 # 666 if [ -n "${_postcmd}" ]; then 667 debug "run_rc_command: evaluating ${_postcmd}()." 668 eval $_postcmd 669 fi 670 ;; 671 672 stop) 673 if [ -z "$rc_pid" ]; then 674 if [ -n "$pidfile" ]; then 675 echo \ 676 "${name} not running? (check $pidfile)." 677 else 678 echo "${name} not running?" 679 fi 680 exit 1 681 fi 682 683 # if the precmd failed and force 684 # isn't set, exit 685 # 686 if [ -n "$_precmd" ]; then 687 eval $_precmd 688 _return=$? 689 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 690 return 1 691 fi 692 693 # send the signal to stop 694 # 695 echo "Stopping ${name}." 696 _doit="kill -${sig_stop:-TERM} $rc_pid" 697 if [ -n "$_user" ]; then 698 _doit="su -m $_user -c 'sh -c \"$_doit\"'" 699 fi 700 701 # if the stop cmd failed and force 702 # isn't set, exit 703 # 704 eval $_doit 705 _return=$? 706 [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 707 708 # wait for the command to exit, 709 # and run postcmd. 710 wait_for_pids $rc_pid 711 if [ -n "$_postcmd" ]; then 712 eval $_postcmd 713 _return=$? 714 fi 715 ;; 716 717 reload) 718 if [ -z "$rc_pid" ]; then 719 if [ -n "$pidfile" ]; then 720 echo \ 721 "${name} not running? (check $pidfile)." 722 else 723 echo "${name} not running?" 724 fi 725 exit 1 726 fi 727 echo "Reloading ${name} config files." 728 if [ -n "$_precmd" ]; then 729 eval $_precmd 730 _return=$? 731 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 732 return 1 733 fi 734 _doit="kill -${sig_reload:-HUP} $rc_pid" 735 if [ -n "$_user" ]; then 736 _doit="su -m $_user -c 'sh -c \"$_doit\"'" 737 fi 738 eval $_doit 739 _return=$? 740 [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 741 if [ -n "$_postcmd" ]; then 742 eval $_postcmd 743 _return=$? 744 fi 745 ;; 746 747 restart) 748 if [ -n "$_precmd" ]; then 749 eval $_precmd 750 _return=$? 751 [ $_return -ne 0 ] && [ -z "$rc_force" ] && 752 return 1 753 fi 754 # prevent restart being called more 755 # than once by any given script 756 # 757 if ${_rc_restart_done:-false}; then 758 return 0 759 fi 760 _rc_restart_done=true 761 762 ( $0 ${_rc_prefix}stop ) 763 $0 ${_rc_prefix}start 764 765 if [ -n "$_postcmd" ]; then 766 eval $_postcmd 767 _return=$? 768 fi 769 ;; 770 771 poll) 772 if [ -n "$rc_pid" ]; then 773 wait_for_pids $rc_pid 774 fi 775 ;; 776 777 rcvar) 778 echo "# $name" 779 if [ -n "$rcvar" ]; then 780 if checkyesno ${rcvar}; then 781 echo "\$${rcvar}=YES" 782 else 783 echo "\$${rcvar}=NO" 784 fi 785 fi 786 ;; 787 788 *) 789 rc_usage "$_keywords" 790 ;; 791 792 esac 793 return $_return 794 done 795 796 echo 1>&2 "$0: unknown directive '$rc_arg'." 797 rc_usage "$_keywords" 798 exit 1 799} 800 801# 802# run_rc_script file arg 803# Start the script `file' with `arg', and correctly handle the 804# return value from the script. If `file' ends with `.sh', it's 805# sourced into the current environment. If `file' appears to be 806# a backup or scratch file, ignore it. Otherwise if it's 807# executable run as a child process. 808# 809run_rc_script() 810{ 811 _file=$1 812 _arg=$2 813 if [ -z "$_file" -o -z "$_arg" ]; then 814 err 3 'USAGE: run_rc_script file arg' 815 fi 816 817 unset name command command_args command_interpreter \ 818 extra_commands pidfile procname \ 819 rcvar required_dirs required_files required_vars 820 eval unset ${_arg}_cmd ${_arg}_precmd ${_arg}_postcmd 821 822 case "$_file" in 823 *.sh) # run in current shell 824 set $_arg ; . $_file 825 ;; 826 *[~#]|*.OLD|*.orig|*,v) # scratch file; skip 827 warn "Ignoring scratch file $_file" 828 ;; 829 *) # run in subshell 830 if [ -x $_file ]; then 831 if [ -n "$rc_fast_and_loose" ]; then 832 set $_arg ; . $_file 833 else 834 ( trap "echo Script $_file interrupted; kill -QUIT $$" 3 835 trap "echo Script $_file interrupted; exit 1" 2 836 set $_arg ; . $_file ) 837 fi 838 fi 839 ;; 840 esac 841} 842 843# 844# load_rc_config 845# Source in the configuration file for a given command. 846# 847load_rc_config() 848{ 849 _command=$1 850 if [ -z "$_command" ]; then 851 err 3 'USAGE: load_rc_config command' 852 fi 853 854 if ${_rc_conf_loaded:-false}; then 855 : 856 else 857 if [ -r /etc/defaults/rc.conf ]; then 858 debug "Sourcing /etc/defaults/rc.conf" 859 . /etc/defaults/rc.conf 860 source_rc_confs 861 elif [ -r /etc/rc.conf ]; then 862 debug "Sourcing /etc/rc.conf (/etc/defaults/rc.conf doesn't exist)." 863 . /etc/rc.conf 864 fi 865 _rc_conf_loaded=true 866 fi 867 if [ -f /etc/rc.conf.d/"$_command" ]; then 868 debug "Sourcing /etc/rc.conf.d/${_command}" 869 . /etc/rc.conf.d/"$_command" 870 fi 871 872 # XXX - Deprecated variable name support 873 # 874 case ${OSTYPE} in 875 FreeBSD) 876 [ -n "$portmap_enable" ] && rpcbind_enable="$portmap_enable" 877 [ -n "$portmap_program" ] && rpcbind_program="$portmap_program" 878 [ -n "$portmap_flags" ] && rpcbind_flags="$portmap_flags" 879 [ -n "$single_mountd_enable" ] && mountd_enable="$single_mountd_enable" 880 [ -n "$xntpd_enable" ] && ntpd_enable="$xntpd_enable" 881 [ -n "$xntpd_program" ] && ntpd_program="$xntpd_program" 882 [ -n "$xntpd_flags" ] && ntpd_flags="$xntpd_flags" 883 [ -n "$dhcp_program" ] && dhclient_program="$dhcp_program" 884 [ -n "$dhcp_flags" ] && dhclient_flags="$dhcp_flags" 885 ;; 886 esac 887 888} 889 890# 891# rc_usage commands 892# Print a usage string for $0, with `commands' being a list of 893# valid commands. 894# 895rc_usage() 896{ 897 echo -n 1>&2 "Usage: $0 [fast|force|one](" 898 899 _sep= 900 for _elem; do 901 echo -n 1>&2 "$_sep$_elem" 902 _sep="|" 903 done 904 echo 1>&2 ")" 905 exit 1 906} 907 908# 909# err exitval message 910# Display message to stderr and log to the syslog, and exit with exitval. 911# 912err() 913{ 914 exitval=$1 915 shift 916 917 if [ -x /usr/bin/logger ]; then 918 logger "$0: ERROR: $*" 919 fi 920 echo 1>&2 "$0: ERROR: $*" 921 exit $exitval 922} 923 924# 925# warn message 926# Display message to stderr and log to the syslog. 927# 928warn() 929{ 930 if [ -x /usr/bin/logger ]; then 931 logger "$0: WARNING: $*" 932 fi 933 echo 1>&2 "$0: WARNING: $*" 934} 935 936# 937# info message 938# Display informational message to stdout and log to syslog. 939# 940info() 941{ 942 case ${rc_info} in 943 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 944 if [ -x /usr/bin/logger ]; then 945 logger "$0: INFO: $*" 946 fi 947 echo "$0: INFO: $*" 948 ;; 949 esac 950} 951 952# 953# debug message 954# If debugging is enabled in rc.conf output message to stderr. 955# BEWARE that you don't call any subroutine that itself calls this 956# function. 957# 958debug() 959{ 960 case ${rc_debug} in 961 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 962 if [ -x /usr/bin/logger ]; then 963 logger "$0: INFO: $*" 964 fi 965 echo 1>&2 "$0: DEBUG: $*" 966 ;; 967 esac 968} 969 970# 971# backup_file action file cur backup 972# Make a backup copy of `file' into `cur', and save the previous 973# version of `cur' as `backup' or use rcs for archiving. 974# 975# This routine checks the value of the backup_uses_rcs variable, 976# which can be either YES or NO. 977# 978# The `action' keyword can be one of the following: 979# 980# add `file' is now being backed up (and is possibly 981# being reentered into the backups system). `cur' 982# is created and RCS files, if necessary, are 983# created as well. 984# 985# update `file' has changed and needs to be backed up. 986# If `cur' exists, it is copied to to `back' or 987# checked into RCS (if the repository file is old), 988# and then `file' is copied to `cur'. Another RCS 989# check in done here if RCS is being used. 990# 991# remove `file' is no longer being tracked by the backups 992# system. If RCS is not being used, `cur' is moved 993# to `back', otherwise an empty file is checked in, 994# and then `cur' is removed. 995# 996# 997backup_file() 998{ 999 _action=$1 1000 _file=$2 1001 _cur=$3 1002 _back=$4 1003 1004 if checkyesno backup_uses_rcs; then 1005 _msg0="backup archive" 1006 _msg1="update" 1007 1008 # ensure that history file is not locked 1009 if [ -f $_cur,v ]; then 1010 rcs -q -u -U -M $_cur 1011 fi 1012 1013 # ensure after switching to rcs that the 1014 # current backup is not lost 1015 if [ -f $_cur ]; then 1016 # no archive, or current newer than archive 1017 if [ ! -f $_cur,v -o $_cur -nt $_cur,v ]; then 1018 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur 1019 rcs -q -kb -U $_cur 1020 co -q -f -u $_cur 1021 fi 1022 fi 1023 1024 case $_action in 1025 add|update) 1026 cp -p $_file $_cur 1027 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur 1028 rcs -q -kb -U $_cur 1029 co -q -f -u $_cur 1030 chown root:wheel $_cur $_cur,v 1031 ;; 1032 remove) 1033 cp /dev/null $_cur 1034 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur 1035 rcs -q -kb -U $_cur 1036 chown root:wheel $_cur $_cur,v 1037 rm $_cur 1038 ;; 1039 esac 1040 else 1041 case $_action in 1042 add|update) 1043 if [ -f $_cur ]; then 1044 cp -p $_cur $_back 1045 fi 1046 cp -p $_file $_cur 1047 chown root:wheel $_cur 1048 ;; 1049 remove) 1050 mv -f $_cur $_back 1051 ;; 1052 esac 1053 fi 1054} 1055 1056# make_symlink src link 1057# Make a symbolic link 'link' to src from basedir. If the 1058# directory in which link is to be created does not exist 1059# a warning will be displayed and an error will be returned. 1060# Returns 0 on sucess, 1 otherwise. 1061# 1062make_symlink() 1063{ 1064 local src link linkdir _me 1065 src="$1" 1066 link="$2" 1067 linkdir="`dirname $link`" 1068 _me="make_symlink()" 1069 1070 if [ -z "$src" -o -z "$link" ]; then 1071 warn "$_me: requires two arguments." 1072 return 1 1073 fi 1074 if [ ! -d "$linkdir" ]; then 1075 warn "$_me: the directory $linkdir does not exist" 1076 return 1 1077 fi 1078 if ! ln -sf $src $link ; then 1079 warn "$_me: unable to make a symbolic link from $link to $src" 1080 return 1 1081 fi 1082 return 0 1083} 1084 1085# devfs_rulesets_from_file file 1086# Reads a set of devfs commands from file, and creates 1087# the specified rulesets with their rules. Returns non-zero 1088# if there was an error. 1089# 1090devfs_rulesets_from_file() 1091{ 1092 local file _err _me 1093 file="$1" 1094 _me="devfs_rulesets_from_file" 1095 _err=0 1096 1097 if [ -z "$file" ]; then 1098 warn "$_me: you must specify a file" 1099 return 1 1100 fi 1101 if [ ! -e "$file" ]; then 1102 debug "$_me: no such file ($file)" 1103 return 0 1104 fi 1105 debug "reading rulesets from file ($file)" 1106 { while read line 1107 do 1108 case $line in 1109 \#*) 1110 continue 1111 ;; 1112 \[*\]*) 1113 rulenum=`expr "$line" : "\[.*=\([0-9]*\)\]"` 1114 if [ -z "$rulenum" ]; then 1115 warn "$_me: cannot extract rule number ($line)" 1116 _err=1 1117 break 1118 fi 1119 rulename=`expr "$line" : "\[\(.*\)=[0-9]*\]"` 1120 if [ -z "$rulename" ]; then 1121 warn "$_me: cannot extract rule name ($line)" 1122 _err=1 1123 break; 1124 fi 1125 eval $rulename=\$rulenum 1126 debug "found ruleset: $rulename=$rulenum" 1127 if ! /sbin/devfs rule -s $rulenum delset ; then 1128 _err=1 1129 break 1130 fi 1131 ;; 1132 *) 1133 rulecmd="${line%%"\#*"}" 1134 # evaluate the command incase it includes 1135 # other rules 1136 if [ -n "$rulecmd" ]; then 1137 debug "adding rule ($rulecmd)" 1138 if ! eval /sbin/devfs rule -s $rulenum $rulecmd 1139 then 1140 _err=1 1141 break 1142 fi 1143 fi 1144 ;; 1145 esac 1146 if [ $_err -ne 0 ]; then 1147 debug "error in $_me" 1148 break 1149 fi 1150 done } < $file 1151 return $_err 1152} 1153 1154# devfs_init_rulesets 1155# Initializes rulesets from configuration files. Returns 1156# non-zero if there was an error. 1157# 1158devfs_init_rulesets() 1159{ 1160 local file _me 1161 _me="devfs_init_rulesets" 1162 1163 # Go through this only once 1164 if [ -n "$devfs_rulesets_init" ]; then 1165 debug "$_me: devfs rulesets already initialized" 1166 return 1167 fi 1168 for file in $devfs_rulesets ; do 1169 devfs_rulesets_from_file $file || return 1 1170 done 1171 devfs_rulesets_init=1 1172 debug "$_me: devfs rulesets initialized" 1173 return 0 1174} 1175 1176# devfs_set_ruleset ruleset [dir] 1177# Sets the default ruleset of dir to ruleset. The ruleset arguement 1178# must be a ruleset name as specified in devfs.rules(5) file. 1179# Returns non-zero if it could not set it successfully. 1180# 1181devfs_set_ruleset() 1182{ 1183 local devdir rs _me 1184 [ -n "$1" ] && eval rs=\$$1 || rs= 1185 [ -n "$2" ] && devdir="-m "$2"" || devdir= 1186 _me="devfs_set_ruleset" 1187 1188 if [ -z "$rs" ]; then 1189 warn "$_me: you must specify a ruleset number" 1190 return 1 1191 fi 1192 debug "$_me: setting ruleset ($rs) on mount-point (${devdir#-m })" 1193 if ! /sbin/devfs $devdir ruleset $rs ; then 1194 warn "$_me: unable to set ruleset $rs to ${devdir#-m }" 1195 return 1 1196 fi 1197 return 0 1198} 1199 1200# devfs_apply_ruleset ruleset [dir] 1201# Apply ruleset number $ruleset to the devfs mountpoint $dir. 1202# The ruleset argument must be a ruleset name as specified 1203# in a devfs.rules(5) file. Returns 0 on success or non-zero 1204# if it could not apply the ruleset. 1205# 1206devfs_apply_ruleset() 1207{ 1208 local devdir rs _me 1209 [ -n "$1" ] && eval rs=\$$1 || rs= 1210 [ -n "$2" ] && devdir="-m "$2"" || devdir= 1211 _me="devfs_apply_ruleset" 1212 1213 if [ -z "$rs" ]; then 1214 warn "$_me: you must specify a ruleset" 1215 return 1 1216 fi 1217 debug "$_me: applying ruleset ($rs) to mount-point (${devdir#-m })" 1218 if ! /sbin/devfs $devdir rule -s $rs applyset ; then 1219 warn "$_me: unable to apply ruleset $rs to ${devdir#-m }" 1220 return 1 1221 fi 1222 return 0 1223} 1224 1225# devfs_domount dir [ruleset] 1226# Mount devfs on dir. If ruleset is specified it is set 1227# on the mount-point. It must also be a ruleset name as specified 1228# in a devfs.rules(5) file. Returns 0 on success. 1229# 1230devfs_domount() 1231{ 1232 local devdir rs _me 1233 devdir="$1" 1234 [ -n "$2" ] && rs=$2 || rs= 1235 _me="devfs_domount()" 1236 1237 if [ -z "$devdir" ]; then 1238 warn "$_me: you must specify a mount-point" 1239 return 1 1240 fi 1241 debug "$_me: mount-point is ($devdir), ruleset is ($rs)" 1242 if ! mount -t devfs dev "$devdir" ; then 1243 warn "$_me: Unable to mount devfs on $devdir" 1244 return 1 1245 fi 1246 if [ -n "$rs" ]; then 1247 devfs_init_rulesets 1248 devfs_set_ruleset $rs $devdir 1249 devfs -m $devdir rule applyset 1250 fi 1251 return 0 1252} 1253 1254# devfs_mount_jail dir [ruleset] 1255# Mounts a devfs file system appropriate for jails 1256# on the directory dir. If ruleset is specified, the ruleset 1257# it names will be used instead. If present, ruleset must 1258# be the name of a ruleset as defined in a devfs.rules(5) file. 1259# This function returns non-zero if an error occurs. 1260# 1261devfs_mount_jail() 1262{ 1263 local jdev rs _me 1264 jdev="$1" 1265 [ -n "$2" ] && rs=$2 || rs="devfsrules_jail" 1266 _me="devfs_mount_jail" 1267 1268 devfs_init_rulesets 1269 if ! devfs_domount "$jdev" $rs ; then 1270 warn "$_me: devfs was not mounted on $jdev" 1271 return 1 1272 fi 1273 return 0 1274} 1275 1276# Provide a function for normalizing the mounting of memory 1277# filesystems. This should allow the rest of the code here to remain 1278# as close as possible between 5-current and 4-stable. 1279# $1 = size 1280# $2 = mount point 1281# $3 = (optional) bytes-per-inode 1282mount_md() { 1283 if [ -n "$3" ]; then 1284 bpi="-i $3" 1285 fi 1286 /sbin/mdmfs $bpi -s $1 -M md $2 1287} 1288