INSTALL revision 160814
175592Sru 275592Sru INSTALLATION ON THE UNIX PLATFORM 394427Sru --------------------------------- 4114412Sru 5291738Sbdrewery [Installation on DOS (with djgpp), Windows, OpenVMS, MacOS (before MacOS X) 6291738Sbdrewery and NetWare is described in INSTALL.DJGPP, INSTALL.W32, INSTALL.VMS, 7291738Sbdrewery INSTALL.MacOS and INSTALL.NW. 875592Sru 9287980Sbdrewery This document describes installation on operating systems in the Unix 10287980Sbdrewery family.] 1175592Sru 1275592Sru To install OpenSSL, you will need: 13 14 * make 15 * Perl 5 16 * an ANSI C compiler 17 * a development environment in form of development libraries and C 18 header files 19 * a supported Unix operating system 20 21 Quick Start 22 ----------- 23 24 If you want to just get on with it, do: 25 26 $ ./config 27 $ make 28 $ make test 29 $ make install 30 31 [If any of these steps fails, see section Installation in Detail below.] 32 33 This will build and install OpenSSL in the default location, which is (for 34 historical reasons) /usr/local/ssl. If you want to install it anywhere else, 35 run config like this: 36 37 $ ./config --prefix=/usr/local --openssldir=/usr/local/openssl 38 39 40 Configuration Options 41 --------------------- 42 43 There are several options to ./config (or ./Configure) to customize 44 the build: 45 46 --prefix=DIR Install in DIR/bin, DIR/lib, DIR/include/openssl. 47 Configuration files used by OpenSSL will be in DIR/ssl 48 or the directory specified by --openssldir. 49 50 --openssldir=DIR Directory for OpenSSL files. If no prefix is specified, 51 the library files and binaries are also installed there. 52 53 no-threads Don't try to build with support for multi-threaded 54 applications. 55 56 threads Build with support for multi-threaded applications. 57 This will usually require additional system-dependent options! 58 See "Note on multi-threading" below. 59 60 no-zlib Don't try to build with support for zlib compression and 61 decompression. 62 63 zlib Build with support for zlib compression/decompression. 64 65 zlib-dynamic Like "zlib", but has OpenSSL load the zlib library dynamically 66 when needed. This is only supported on systems where loading 67 of shared libraries is supported. This is the default choice. 68 69 no-shared Don't try to create shared libraries. 70 71 shared In addition to the usual static libraries, create shared 72 libraries on platforms where it's supported. See "Note on 73 shared libraries" below. 74 75 no-asm Do not use assembler code. 76 77 386 Use the 80386 instruction set only (the default x86 code is 78 more efficient, but requires at least a 486). Note: Use 79 compiler flags for any other CPU specific configuration, 80 e.g. "-m32" to build x86 code on an x64 system. 81 82 no-sse2 Exclude SSE2 code pathes. Normally SSE2 extention is 83 detected at run-time, but the decision whether or not the 84 machine code will be executed is taken solely on CPU 85 capability vector. This means that if you happen to run OS 86 kernel which does not support SSE2 extension on Intel P4 87 processor, then your application might be exposed to 88 "illegal instruction" exception. There might be a way 89 to enable support in kernel, e.g. FreeBSD kernel can be 90 compiled with CPU_ENABLE_SSE, and there is a way to 91 disengage SSE2 code pathes upon application start-up, 92 but if you aim for wider "audience" running such kernel, 93 consider no-sse2. Both 386 and no-asm options above imply 94 no-sse2. 95 96 no-<cipher> Build without the specified cipher (bf, cast, des, dh, dsa, 97 hmac, md2, md5, mdc2, rc2, rc4, rc5, rsa, sha). 98 The crypto/<cipher> directory can be removed after running 99 "make depend". 100 101 -Dxxx, -lxxx, -Lxxx, -fxxx, -mxxx, -Kxxx These system specific options will 102 be passed through to the compiler to allow you to 103 define preprocessor symbols, specify additional libraries, 104 library directories or other compiler options. 105 106 107 Installation in Detail 108 ---------------------- 109 110 1a. Configure OpenSSL for your operation system automatically: 111 112 $ ./config [options] 113 114 This guesses at your operating system (and compiler, if necessary) and 115 configures OpenSSL based on this guess. Run ./config -t to see 116 if it guessed correctly. If you want to use a different compiler, you 117 are cross-compiling for another platform, or the ./config guess was 118 wrong for other reasons, go to step 1b. Otherwise go to step 2. 119 120 On some systems, you can include debugging information as follows: 121 122 $ ./config -d [options] 123 124 1b. Configure OpenSSL for your operating system manually 125 126 OpenSSL knows about a range of different operating system, hardware and 127 compiler combinations. To see the ones it knows about, run 128 129 $ ./Configure 130 131 Pick a suitable name from the list that matches your system. For most 132 operating systems there is a choice between using "cc" or "gcc". When 133 you have identified your system (and if necessary compiler) use this name 134 as the argument to ./Configure. For example, a "linux-elf" user would 135 run: 136 137 $ ./Configure linux-elf [options] 138 139 If your system is not available, you will have to edit the Configure 140 program and add the correct configuration for your system. The 141 generic configurations "cc" or "gcc" should usually work on 32 bit 142 systems. 143 144 Configure creates the file Makefile.ssl from Makefile.org and 145 defines various macros in crypto/opensslconf.h (generated from 146 crypto/opensslconf.h.in). 147 148 2. Build OpenSSL by running: 149 150 $ make 151 152 This will build the OpenSSL libraries (libcrypto.a and libssl.a) and the 153 OpenSSL binary ("openssl"). The libraries will be built in the top-level 154 directory, and the binary will be in the "apps" directory. 155 156 If "make" fails, look at the output. There may be reasons for 157 the failure that aren't problems in OpenSSL itself (like missing 158 standard headers). If it is a problem with OpenSSL itself, please 159 report the problem to <openssl-bugs@openssl.org> (note that your 160 message will be recorded in the request tracker publicly readable 161 via http://www.openssl.org/support/rt2.html and will be forwarded to a 162 public mailing list). Include the output of "make report" in your message. 163 Please check out the request tracker. Maybe the bug was already 164 reported or has already been fixed. 165 166 [If you encounter assembler error messages, try the "no-asm" 167 configuration option as an immediate fix.] 168 169 Compiling parts of OpenSSL with gcc and others with the system 170 compiler will result in unresolved symbols on some systems. 171 172 3. After a successful build, the libraries should be tested. Run: 173 174 $ make test 175 176 If a test fails, look at the output. There may be reasons for 177 the failure that isn't a problem in OpenSSL itself (like a missing 178 or malfunctioning bc). If it is a problem with OpenSSL itself, 179 try removing any compiler optimization flags from the CFLAG line 180 in Makefile.ssl and run "make clean; make". Please send a bug 181 report to <openssl-bugs@openssl.org>, including the output of 182 "make report" in order to be added to the request tracker at 183 http://www.openssl.org/support/rt2.html. 184 185 4. If everything tests ok, install OpenSSL with 186 187 $ make install 188 189 This will create the installation directory (if it does not exist) and 190 then the following subdirectories: 191 192 certs Initially empty, this is the default location 193 for certificate files. 194 man/man1 Manual pages for the 'openssl' command line tool 195 man/man3 Manual pages for the libraries (very incomplete) 196 misc Various scripts. 197 private Initially empty, this is the default location 198 for private key files. 199 200 If you didn't choose a different installation prefix, the 201 following additional subdirectories will be created: 202 203 bin Contains the openssl binary and a few other 204 utility programs. 205 include/openssl Contains the header files needed if you want to 206 compile programs with libcrypto or libssl. 207 lib Contains the OpenSSL library files themselves. 208 209 Package builders who want to configure the library for standard 210 locations, but have the package installed somewhere else so that 211 it can easily be packaged, can use 212 213 $ make INSTALL_PREFIX=/tmp/package-root install 214 215 (or specify "--install_prefix=/tmp/package-root" as a configure 216 option). The specified prefix will be prepended to all 217 installation target filenames. 218 219 220 NOTE: The header files used to reside directly in the include 221 directory, but have now been moved to include/openssl so that 222 OpenSSL can co-exist with other libraries which use some of the 223 same filenames. This means that applications that use OpenSSL 224 should now use C preprocessor directives of the form 225 226 #include <openssl/ssl.h> 227 228 instead of "#include <ssl.h>", which was used with library versions 229 up to OpenSSL 0.9.2b. 230 231 If you install a new version of OpenSSL over an old library version, 232 you should delete the old header files in the include directory. 233 234 Compatibility issues: 235 236 * COMPILING existing applications 237 238 To compile an application that uses old filenames -- e.g. 239 "#include <ssl.h>" --, it will usually be enough to find 240 the CFLAGS definition in the application's Makefile and 241 add a C option such as 242 243 -I/usr/local/ssl/include/openssl 244 245 to it. 246 247 But don't delete the existing -I option that points to 248 the ..../include directory! Otherwise, OpenSSL header files 249 could not #include each other. 250 251 * WRITING applications 252 253 To write an application that is able to handle both the new 254 and the old directory layout, so that it can still be compiled 255 with library versions up to OpenSSL 0.9.2b without bothering 256 the user, you can proceed as follows: 257 258 - Always use the new filename of OpenSSL header files, 259 e.g. #include <openssl/ssl.h>. 260 261 - Create a directory "incl" that contains only a symbolic 262 link named "openssl", which points to the "include" directory 263 of OpenSSL. 264 For example, your application's Makefile might contain the 265 following rule, if OPENSSLDIR is a pathname (absolute or 266 relative) of the directory where OpenSSL resides: 267 268 incl/openssl: 269 -mkdir incl 270 cd $(OPENSSLDIR) # Check whether the directory really exists 271 -ln -s `cd $(OPENSSLDIR); pwd`/include incl/openssl 272 273 You will have to add "incl/openssl" to the dependencies 274 of those C files that include some OpenSSL header file. 275 276 - Add "-Iincl" to your CFLAGS. 277 278 With these additions, the OpenSSL header files will be available 279 under both name variants if an old library version is used: 280 Your application can reach them under names like <openssl/foo.h>, 281 while the header files still are able to #include each other 282 with names of the form <foo.h>. 283 284 285 Note on multi-threading 286 ----------------------- 287 288 For some systems, the OpenSSL Configure script knows what compiler options 289 are needed to generate a library that is suitable for multi-threaded 290 applications. On these systems, support for multi-threading is enabled 291 by default; use the "no-threads" option to disable (this should never be 292 necessary). 293 294 On other systems, to enable support for multi-threading, you will have 295 to specify at least two options: "threads", and a system-dependent option. 296 (The latter is "-D_REENTRANT" on various systems.) The default in this 297 case, obviously, is not to include support for multi-threading (but 298 you can still use "no-threads" to suppress an annoying warning message 299 from the Configure script.) 300 301 302 Note on shared libraries 303 ------------------------ 304 305 Shared library is currently an experimental feature. The only reason to 306 have them would be to conserve memory on systems where several program 307 are using OpenSSL. Binary backward compatibility can't be guaranteed 308 before OpenSSL version 1.0. 309 310 For some systems, the OpenSSL Configure script knows what is needed to 311 build shared libraries for libcrypto and libssl. On these systems, 312 the shared libraries are currently not created by default, but giving 313 the option "shared" will get them created. This method supports Makefile 314 targets for shared library creation, like linux-shared. Those targets 315 can currently be used on their own just as well, but this is expected 316 to change in future versions of OpenSSL. 317 318 Note on random number generation 319 -------------------------------- 320 321 Availability of cryptographically secure random numbers is required for 322 secret key generation. OpenSSL provides several options to seed the 323 internal PRNG. If not properly seeded, the internal PRNG will refuse 324 to deliver random bytes and a "PRNG not seeded error" will occur. 325 On systems without /dev/urandom (or similar) device, it may be necessary 326 to install additional support software to obtain random seed. 327 Please check out the manual pages for RAND_add(), RAND_bytes(), RAND_egd(), 328 and the FAQ for more information. 329 330 Note on support for multiple builds 331 ----------------------------------- 332 333 OpenSSL is usually built in its source tree. Unfortunately, this doesn't 334 support building for multiple platforms from the same source tree very well. 335 It is however possible to build in a separate tree through the use of lots 336 of symbolic links, which should be prepared like this: 337 338 mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`" 339 cd objtree/"`uname -s`-`uname -r`-`uname -m`" 340 (cd $OPENSSL_SOURCE; find . -type f) | while read F; do 341 mkdir -p `dirname $F` 342 rm -f $F; ln -s $OPENSSL_SOURCE/$F $F 343 echo $F '->' $OPENSSL_SOURCE/$F 344 done 345 make -f Makefile.org clean 346 347 OPENSSL_SOURCE is an environment variable that contains the absolute (this 348 is important!) path to the OpenSSL source tree. 349 350 Also, operations like 'make update' should still be made in the source tree. 351