INSTALL revision 68651
1 2 INSTALLATION ON THE UNIX PLATFORM 3 --------------------------------- 4 5 [Installation on Windows, OpenVMS and MacOS (before MacOS X) is described 6 in INSTALL.W32, INSTALL.VMS and INSTALL.MacOS.] 7 8 To install OpenSSL, you will need: 9 10 * Perl 5 11 * an ANSI C compiler 12 * a supported Unix operating system 13 14 Quick Start 15 ----------- 16 17 If you want to just get on with it, do: 18 19 $ ./config 20 $ make 21 $ make test 22 $ make install 23 24 [If any of these steps fails, see section Installation in Detail below.] 25 26 This will build and install OpenSSL in the default location, which is (for 27 historical reasons) /usr/local/ssl. If you want to install it anywhere else, 28 run config like this: 29 30 $ ./config --prefix=/usr/local --openssldir=/usr/local/openssl 31 32 33 Configuration Options 34 --------------------- 35 36 There are several options to ./config (or ./Configure) to customize 37 the build: 38 39 --prefix=DIR Install in DIR/bin, DIR/lib, DIR/include/openssl. 40 Configuration files used by OpenSSL will be in DIR/ssl 41 or the directory specified by --openssldir. 42 43 --openssldir=DIR Directory for OpenSSL files. If no prefix is specified, 44 the library files and binaries are also installed there. 45 46 rsaref Build with RSADSI's RSAREF toolkit (this assumes that 47 librsaref.a is in the library search path). 48 49 no-threads Don't try to build with support for multi-threaded 50 applications. 51 52 threads Build with support for multi-threaded applications. 53 This will usually require additional system-dependent options! 54 See "Note on multi-threading" below. 55 56 no-shared Don't try to create shared libraries. 57 58 shared In addition to the usual static libraries, create shared 59 libraries on platforms where it's supported. See "Note on 60 shared libraries" below. 61 62 no-asm Do not use assembler code. 63 64 386 Use the 80386 instruction set only (the default x86 code is 65 more efficient, but requires at least a 486). 66 67 no-<cipher> Build without the specified cipher (bf, cast, des, dh, dsa, 68 hmac, md2, md5, mdc2, rc2, rc4, rc5, rsa, sha). 69 The crypto/<cipher> directory can be removed after running 70 "make depend". 71 72 -Dxxx, -lxxx, -Lxxx, -fxxx, -Kxxx These system specific options will 73 be passed through to the compiler to allow you to 74 define preprocessor symbols, specify additional libraries, 75 library directories or other compiler options. 76 77 78 Installation in Detail 79 ---------------------- 80 81 1a. Configure OpenSSL for your operation system automatically: 82 83 $ ./config [options] 84 85 This guesses at your operating system (and compiler, if necessary) and 86 configures OpenSSL based on this guess. Run ./config -t to see 87 if it guessed correctly. If you want to use a different compiler, you 88 are cross-compiling for another platform, or the ./config guess was 89 wrong for other reasons, go to step 1b. Otherwise go to step 2. 90 91 On some systems, you can include debugging information as follows: 92 93 $ ./config -d [options] 94 95 1b. Configure OpenSSL for your operating system manually 96 97 OpenSSL knows about a range of different operating system, hardware and 98 compiler combinations. To see the ones it knows about, run 99 100 $ ./Configure 101 102 Pick a suitable name from the list that matches your system. For most 103 operating systems there is a choice between using "cc" or "gcc". When 104 you have identified your system (and if necessary compiler) use this name 105 as the argument to ./Configure. For example, a "linux-elf" user would 106 run: 107 108 $ ./Configure linux-elf [options] 109 110 If your system is not available, you will have to edit the Configure 111 program and add the correct configuration for your system. The 112 generic configurations "cc" or "gcc" should usually work on 32 bit 113 systems. 114 115 Configure creates the file Makefile.ssl from Makefile.org and 116 defines various macros in crypto/opensslconf.h (generated from 117 crypto/opensslconf.h.in). 118 119 2. Build OpenSSL by running: 120 121 $ make 122 123 This will build the OpenSSL libraries (libcrypto.a and libssl.a) and the 124 OpenSSL binary ("openssl"). The libraries will be built in the top-level 125 directory, and the binary will be in the "apps" directory. 126 127 If "make" fails, look at the output. There may be reasons for 128 the failure that isn't a problem in OpenSSL itself (like missing 129 standard headers). If it is a problem with OpenSSL itself, please 130 report the problem to <openssl-bugs@openssl.org> (note that your 131 message will be forwarded to a public mailing list). Include the 132 output of "make report" in your message. 133 134 [If you encounter assembler error messages, try the "no-asm" 135 configuration option as an immediate fix.] 136 137 Compiling parts of OpenSSL with gcc and others with the system 138 compiler will result in unresolved symbols on some systems. 139 140 3. After a successful build, the libraries should be tested. Run: 141 142 $ make test 143 144 If a test fails, look at the output. There may be reasons for 145 the failure that isn't a problem in OpenSSL itself (like a missing 146 or malfunctioning bc). If it is a problem with OpenSSL itself, 147 try removing any compiler optimization flags from the CFLAGS line 148 in Makefile.ssl and run "make clean; make". Please send a bug 149 report to <openssl-bugs@openssl.org>, including the output of 150 "make report". 151 152 4. If everything tests ok, install OpenSSL with 153 154 $ make install 155 156 This will create the installation directory (if it does not exist) and 157 then the following subdirectories: 158 159 certs Initially empty, this is the default location 160 for certificate files. 161 man/man1 Manual pages for the 'openssl' command line tool 162 man/man3 Manual pages for the libraries (very incomplete) 163 misc Various scripts. 164 private Initially empty, this is the default location 165 for private key files. 166 167 If you didn't choose a different installation prefix, the 168 following additional subdirectories will be created: 169 170 bin Contains the openssl binary and a few other 171 utility programs. 172 include/openssl Contains the header files needed if you want to 173 compile programs with libcrypto or libssl. 174 lib Contains the OpenSSL library files themselves. 175 176 Package builders who want to configure the library for standard 177 locations, but have the package installed somewhere else so that 178 it can easily be packaged, can use 179 180 $ make INSTALL_PREFIX=/tmp/package-root install 181 182 (or specify "--install_prefix=/tmp/package-root" as a configure 183 option). The specified prefix will be prepended to all 184 installation target filenames. 185 186 187 NOTE: The header files used to reside directly in the include 188 directory, but have now been moved to include/openssl so that 189 OpenSSL can co-exist with other libraries which use some of the 190 same filenames. This means that applications that use OpenSSL 191 should now use C preprocessor directives of the form 192 193 #include <openssl/ssl.h> 194 195 instead of "#include <ssl.h>", which was used with library versions 196 up to OpenSSL 0.9.2b. 197 198 If you install a new version of OpenSSL over an old library version, 199 you should delete the old header files in the include directory. 200 201 Compatibility issues: 202 203 * COMPILING existing applications 204 205 To compile an application that uses old filenames -- e.g. 206 "#include <ssl.h>" --, it will usually be enough to find 207 the CFLAGS definition in the application's Makefile and 208 add a C option such as 209 210 -I/usr/local/ssl/include/openssl 211 212 to it. 213 214 But don't delete the existing -I option that points to 215 the ..../include directory! Otherwise, OpenSSL header files 216 could not #include each other. 217 218 * WRITING applications 219 220 To write an application that is able to handle both the new 221 and the old directory layout, so that it can still be compiled 222 with library versions up to OpenSSL 0.9.2b without bothering 223 the user, you can proceed as follows: 224 225 - Always use the new filename of OpenSSL header files, 226 e.g. #include <openssl/ssl.h>. 227 228 - Create a directory "incl" that contains only a symbolic 229 link named "openssl", which points to the "include" directory 230 of OpenSSL. 231 For example, your application's Makefile might contain the 232 following rule, if OPENSSLDIR is a pathname (absolute or 233 relative) of the directory where OpenSSL resides: 234 235 incl/openssl: 236 -mkdir incl 237 cd $(OPENSSLDIR) # Check whether the directory really exists 238 -ln -s `cd $(OPENSSLDIR); pwd`/include incl/openssl 239 240 You will have to add "incl/openssl" to the dependencies 241 of those C files that include some OpenSSL header file. 242 243 - Add "-Iincl" to your CFLAGS. 244 245 With these additions, the OpenSSL header files will be available 246 under both name variants if an old library version is used: 247 Your application can reach them under names like <openssl/foo.h>, 248 while the header files still are able to #include each other 249 with names of the form <foo.h>. 250 251 252 Note on multi-threading 253 ----------------------- 254 255 For some systems, the OpenSSL Configure script knows what compiler options 256 are needed to generate a library that is suitable for multi-threaded 257 applications. On these systems, support for multi-threading is enabled 258 by default; use the "no-threads" option to disable (this should never be 259 necessary). 260 261 On other systems, to enable support for multi-threading, you will have 262 to specify at least two options: "threads", and a system-dependent option. 263 (The latter is "-D_REENTRANT" on various systems.) The default in this 264 case, obviously, is not to include support for multi-threading (but 265 you can still use "no-threads" to suppress an annoying warning message 266 from the Configure script.) 267 268 269 Note on shared libraries 270 ------------------------ 271 272 For some systems, the OpenSSL Configure script knows what is needed to 273 build shared libraries for libcrypto and libssl. On these systems, 274 the shared libraries are currently not created by default, but giving 275 the option "shared" will get them created. This method supports Makefile 276 targets for shared library creation, like linux-shared. Those targets 277 can currently be used on their own just as well, but this is expected 278 to change in future versions of OpenSSL. 279