configure.local.example revision 294113
1# $Id: configure.local.example,v 1.10 2015/11/07 13:14:21 schwarze Exp $ 2# 3# Copyright (c) 2014, 2015 Ingo Schwarze <schwarze@openbsd.org> 4# 5# Permission to use, copy, modify, and distribute this software for any 6# purpose with or without fee is hereby granted, provided that the above 7# copyright notice and this permission notice appear in all copies. 8# 9# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 17# For all settings documented in this file, there are reasonable 18# defaults and/or the ./configure script attempts autodetection. 19# Consequently, you only need to create a file ./configure.local 20# and put any of these settings into it if ./configure autodetection 21# fails or if you want to make different choices for other reasons. 22 23# If autodetection fails, please tell <tech@mdocml.bsd.lv>. 24 25# We recommend that you write ./configure.local from scratch and 26# only put the lines there you need. This file contains examples. 27# It is not intended as a template to be copied as a whole. 28 29# --- user settings relevant for all builds ---------------------------- 30 31# For -Tutf8 and -Tlocale operation, mandoc(1) requires <locale.h> 32# providing setlocale(3) and <wchar.h> providing wcwidth(3) and 33# putwchar(3) with a wchar_t storing UCS-4 values. Theoretically, 34# the latter should be tested with the __STDC_ISO_10646__ feature 35# macro. In practice, many <wchar.h> headers do not provide that 36# macro even though they treat wchar_t as UCS-4. So the automatic 37# test only checks that wchar_t is wide enough, that is, at least 38# four bytes. 39 40# The following line forces multi-byte support. 41# If your C library does not treat wchar_t as UCS-4, the UTF-8 output 42# mode will print garbage. 43 44HAVE_WCHAR=1 45 46# The following line disables multi-byte support. 47# The output modes -Tutf8 and -Tlocale will be the same as -Tascii. 48 49HAVE_WCHAR=0 50 51# When man(1) or apropos(1) is called without -m and -M options, 52# MANPATH is not set in the environment, man.conf(5) is not available 53# and manpath(1) not used, manuals are searched for in the following 54# directory trees by default. 55 56MANPATH_DEFAULT="/usr/share/man:/usr/X11R6/man:/usr/local/man" 57 58# In manual pages written in the mdoc(7) language, the operating system 59# version is displayed in the page footer line. If an operating system 60# is specified as an argument to the .Os macro, that is always used. 61# If the .Os macro has no argument and an operation system is specified 62# with the mandoc(1) -Ios= command line option, that is used. 63# Otherwise, the uname(3) library function is called at runtime to find 64# the name of the operating system. 65# If you do not want uname(3) to be called but instead want a fixed 66# string to be used, use the following line: 67 68OSNAME="OpenBSD 5.6" 69 70# The following installation directories are used. 71# It is possible to set only one or a few of these variables, 72# there is no need to copy the whole block. 73# Even if you set PREFIX to something else, the other variables 74# pick it up without copying them all over. 75 76PREFIX="/usr/local" 77BINDIR="${PREFIX}/bin" 78SBINDIR="${PREFIX}/sbin" 79INCLUDEDIR="${PREFIX}/include/mandoc" 80LIBDIR="${PREFIX}/lib/mandoc" 81MANDIR="${PREFIX}/man" 82 83# The man(1) utility needs to know where the manuals reside. 84# We know of two ways to tell it: via manpath(1) or man.conf(5). 85# The latter is used by OpenBSD and NetBSD, the former by most 86# other systems. 87 88# Force usage of manpath(1). 89# If it is not installed or not operational, 90# man(1), makewhatis(8), and apropos(1) will not work properly. 91HAVE_MANPATH=1 92 93# Force usage of man.conf(5). 94# If it does not exist or contains no valid configuration, 95# man(1), makewhatis(8), and apropos(1) will not work properly. 96HAVE_MANPATH=0 97 98# Some distributions may want to avoid naming conflicts 99# with the configuration files of other man(1) implementations. 100# This changes the name of the installed section 5 manual page as well. 101MANM_MANCONF="mandoc.conf" # default is "man.conf" 102 103# Some distributions may want to avoid naming conflicts among manuals. 104# If you want to change the names of installed section 7 manual pages, 105# the following alternative names are suggested. 106# The suffix ".7" will automatically be appended. 107# It is possible to set only one or a few of these variables, 108# there is no need to copy the whole block. 109 110MANM_MAN="mandoc_man" # default is "man" 111MANM_MDOC="mandoc_mdoc" # default is "mdoc" 112MANM_ROFF="mandoc_roff" # default is "roff" 113MANM_EQN="mandoc_eqn" # default is "eqn" 114MANM_TBL="mandoc_tbl" # default is "tbl" 115 116# Some distributions may want to avoid naming conflicts 117# with other man(1) and soelim(1) utilities. 118# If you want to change the names of binary programs, 119# the following alternative names are suggested. 120# Using different names is possible as well. 121# This changes the names of the installed section 1 manual pages as well. 122 123BINM_MAN=mman # default is "man" 124BINM_SOELIM=msoelim # default is "soelim" 125 126# It is possible to change the utility program used for installation 127# and the modes files are installed with. The defaults are: 128 129INSTALL="install" 130INSTALL_PROGRAM="${INSTALL} -m 0555" 131INSTALL_LIB="${INSTALL} -m 0444" 132INSTALL_MAN="${INSTALL} -m 0444" 133INSTALL_DATA="${INSTALL} -m 0444" 134 135# --- user settings related to database support ------------------------ 136 137# By default, building makewhatis(8) and apropos(1) is enabled. 138# To disable it, for example to avoid the dependency on SQLite3, 139# use the following line. It that case, the remaining settings 140# in this section are irrelevant. 141 142BUILD_DB=0 143 144# Two libraries are needed: SQLite3 and ohash(3). 145# Autoconfiguration tries the following linker flags to find them. 146# If none of these work, add a working DBLIB line to configure.local, 147# disabling autodetection for library directories. 148 149DBLIB="-lsqlite3" 150DBLIB="-lsqlite3 -lutil" 151DBLIB="-L/usr/local/lib -lsqlite3" 152 153# When library autodetection decides to use -L/usr/local/lib, 154# -I/usr/local/include is automatically added to CFLAGS. 155# If you manually set DBLIB to something including -L/usr/local/lib, 156# chances are you will also need the following line: 157 158CFLAGS="${CFLAGS} -I/usr/local/include" 159 160# Some distributions may want to avoid naming conflicts 161# with another implementation of apropos(1) and makewhatis(8). 162# If you want to change the names of the binary programs, 163# the following alternative names are suggested. 164# Using other names is possible as well. 165# This changes the names of the installed section 1 and section 8 166# manual pages as well. 167# It is possible to set only one or two of these variables, 168# there is no need to copy the whole block. 169 170BINM_APROPOS=mapropos # default is "apropos" 171BINM_WHATIS=mwhatis # default is "whatis" 172BINM_MAKEWHATIS=mandocdb # default is "makewhatis" 173 174# When using the "homebrew" package manager on Mac OS X, the actual 175# manuals are located in a so-called "cellar" and only symlinked 176# into the manual trees. To allow mandoc to follow such symlinks, 177# you have to specify the physical location of the cellar as returned 178# by realpath(3), for example: 179 180PREFIX="/usr/local" 181HOMEBREWDIR="${PREFIX}/Cellar" 182 183# --- user settings related man.cgi ------------------------------------ 184 185# By default, building man.cgi(8) is disabled. To enable it, copy 186# cgi.h.example to cgi.h, edit it, and use the following line. 187# Obviously, this requires that BUILD_DB is enabled, too. 188 189BUILD_CGI=1 190 191# The remaining settings in this section are only relevant if BUILD_CGI 192# is enabled. Otherwise, they have no effect either way. 193 194# By default, man.cgi(8) is linked statically. 195# Some systems do not support static linking, for example Mac OS X. 196# In that case, use the following line: 197 198STATIC= 199 200# Some systems, for example Linux, require -pthread for static linking: 201 202STATIC="-static -pthread" 203 204# Some directories. 205# This works just like PREFIX, see above. 206 207WWWPREFIX="/var/www" 208HTDOCDIR="${WWWPREFIX}/htdocs" 209CGIBINDIR="${WWWPREFIX}/cgi-bin" 210 211# --- settings that rarely need to be touched -------------------------- 212 213# Do not set these variables unless you really need to. 214 215# You can manually override the compiler to be used. 216# But that's rarely useful because ./configure asks your make(1) 217# which compiler to use, and that answer will hardly be wrong. 218 219CC=cc 220 221# The default compiler flags are: 222 223CFLAGS="-g -W -Wall -Wstrict-prototypes -Wno-unused-parameter -Wwrite-strings" 224 225# In rare cases, it may be required to skip individual automatic tests. 226# Each of the following variables can be set to 0 (test will not be run 227# and will be regarded as failed) or 1 (test will not be run and will 228# be regarded as successful). 229 230HAVE_DIRENT_NAMLEN=0 231HAVE_FGETLN=0 232HAVE_FTS=0 233HAVE_GETSUBOPT=0 234HAVE_MMAP=0 235HAVE_REALLOCARRAY=0 236HAVE_STRCASESTR=0 237HAVE_STRLCAT=0 238HAVE_STRLCPY=0 239HAVE_STRPTIME=0 240HAVE_STRSEP=0 241HAVE_STRTONUM=0 242 243HAVE_SQLITE3=0 244HAVE_SQLITE3_ERRSTR=0 245HAVE_OHASH=0 246